Tuesday, 19.06.2012
09:15 hrs Conference Opening
Leo Lorenz, ECPE, Germany
Meeting Room 2
Advanced IGBT Modules
Environmental Friendly and Renewable Energy Technologies
Chairman: Gourab Majumdar, Mitsubishi Electric Corporation, Japan
Meeting Room 2
Chairman: Dapeng Zheng, Emerson Network Power, China
Meeting Room 11
09:30 hrs Using the new generation IGBT modules reasonably for inverters
Xiankui Ma, Mitsubishi Electric & Electronics (Shanghai) Co., Ltd., China
09:30 hrs Advantages and Disadvantages of 3L NPC and 3L TNPC Topology
Ingo Staudt, Semikron Elektronik GmbH & Co. KG, Germany
*Nominated for the Best Paper Award Renewables
10:00 hrs Three-Phase Advanced Neutral-Point-Clamped IGBT module
Chang-Wen Chen, Fuji Electric China Co. Ltd., China
*Nominated for the Young Engineer Award
10:30 hrs The 6th gen. Intelligent Power Module for Large Capacity Type
Ming-Hui Zhan, Fuji Electric China Co. Ltd., China
10:00 hrs Digital Phase Lock Loop Technology in Solar Inverter System Based on
C2000
Vieri Xue, Texas Instruments, China
10:30 hrs 1-MW Solar Power Inverters using new Three-level IGBT Modules
connected in parallel
Kansuke Fujii, Fuji Electric Co., Ltd., Japan
*Nominated for the Best Paper Award
*Nominated for the Best Paper Award Renewables
11:00 hrs Coffee Break
11:15 hrs Novel Small Intelligent Power Module For RAC
Tadanori Yamada, Fuji Electric Co.,Ltd., Japan
11:15 hrs DC-DC converter for photovoltaic application with MPPT function
embedded interleaved 4
Amedeo La Scala, STMicroelectronics, Italy
11:45 hrs New 50A/1200V transfer Mold IPM
Ming Shang, Mitsubishi Electric, Japan
12:15 hrs Keynote
Wireless Power a New Trend in Power Conversion
Ionel Dan Jitaru, Delta Energy Systems, United States of America
13:00 Uhr Lunch Break
Special Session “Solar”
Chairman: Dehong Xu, Zhejiang University, China
Meeting Room 2
14:00 hrs An overview of PV Inverters and Trends for Energy Efficiency
Alpha Zhang, Delta Electronics, China
14:30 hrs Recent Development of Technology and Market of Grid-Connected PV
System in China
Zhengming Zhao, Tsinghua University, China
15:00 hrs Impact of Latest Power Devices for Photovoltaic Inverters
Tatsuhiko Fujihira, Fuji Electric, Japan
15:30 hrs The Outlook of Solar PV and Inverter Market in China
Cao RenXian, Sungrow, China
16:00 hrs Quality of PV inverters – state-of-the-art challenges and solutions
Georg Lauss, AIT Austrian Institute of Technology, Austria
16:30 hrs Panel Discussion
Meeting Room 2
Wednesday, 20.06.2012
New Power Module Technologies
AC/DC Converter
Chairman: Naoto Fujishima, Fuji Electric, Japan
Meeting Room 2
Chairman: Jianping Ying, Delta Electronics (Shanghai) Co. Ltd., China
Meeting Room 11
09:30 hrs
Next generation of power modules - full sinter technology for solder and wire free
applications
Ulrich Sagebaum, Semikron Electronic GmbH, Germany
*Nominated for the Young Engineer Award
09:30 hrs
High-Efficiency LED Lighting Need Not be a High-Cost Proposition
Andrew Smith, Power Integrations, United States of America
Anthony Wu, Power Integrations, United States of America
10:00 hrs
10:00 hrs
New Generation of Silicone Gels for Power Devices Encapsulation
Eric Vanlathem, Dow Corning, Belgium
*Nominated for the Best Paper Award
Integration of Isolation for Off-Line LED Drivers
Baoxing Chen, Analog Devices, Inc., United States of America
10:30 hrs
New diode technologies enable power supply designers to optimize topology choice and
benefit from performance enhancements
Edward Ong, Power Integrations, United States of America
11:15 hrs
High Speed 5 IGBT achieves Platinum Efficiency Standard in commercial SMPS applications
Davide Chiola, Infineon Technologies Austria AG, Austria
*Nominated for the Best Paper Award
11:45 hrs
A Low Switching Loss Superjunction MOSFET (Super J-MOS) by Optimizing Surface Design
Sota Watanabe, Fuji Electric, Japan
*Nominated for the Young Engineer Award
10:30 hrs
Novel Interconnection Materials for High Reliable Power Converters with Operation
Temperatures above 150°C
Dexter Reynoso, Heraeus Materials Singapore Pte Ltd., Singapore
11:00 hrs
Coffee Break
11:15 hrs
Thermal management of IGBT modules systems
Fumihiko Momose, Fuji Electric, Japan
11:45 hrs
Asymmetrical Inductance Utilized for Switching Loss Reduction In Power Modules
Roger Chen, Vincotech China, China
*Nominated for the Young Engineer Award
12:15 hrs
Keynote
Power Module Packaging Technologies: The World is complex
Thomas Stockmeier, Semikron International GmbH, Germany
13:00 Uhr
Lunch Break and Poster Session
Meeting Room 2
13:00 - 14:00 hrs
Postersession
13:00 - 14:00 hrs
Postersession
Chairman: James Wu, Ching Yun University, Taiwan
Chairman: Zhihong Wu, Tongjii University, China
P01
A 4.5kV IGBT module and application in Neutral-Point-Clamped Three Level Wind Turbine
Converter
Gong Xiguo, Mitsubishi Electric & Electronics(Shanghai), China
P11
Dual axle servo driver with mini DIPIPM
Lu Siqing, Mitsubishi Electric & Electronics (Shanghai) Co., Ltd, China
P12
P02
Introduction of large DIPIPM Ver. 4 application on EV bus air conditioner inverter
Xiaoling Wang, Mitsubishi Electric & Electronics , China
A New Intelligent Power Module Device with the Fast Reverse Recovery MOSFET
for Motor Drive Applications
Minsub Lee, LS Power Semitech Co., Ltd., Korea
Bum-seung Jin, LS Power Semitech Co., Ltd., Korea
P03
New generation Super-Junction MOSFET in PQFN88 for High Efficiency and Low Profile
Power Systems
Dongkook Son, Fairchild Semiconductor, South Korea
P13
1200V Intelligent Power Module for The High Power Motor Drive Applications
JunBae Lee, LS Power Semitech Co., Ltd., South Korea
P04
A Low Power Single-stage PSR Flyback for LED Lighting with TRIAC Dimming
Jamie Zhang, Texas Instruments, China
P14
Comparison and Optimization of PFC design in Inverter type air-condition system
Albert Chen, Fairchild Semiconductor, China
P05
High performance intelligent power module for PWM rectifier application
Sun Jian, Mitsubishi Electric & Electronics (Shanghai) Co., Ltd., China
P15
IGBT drive optimization in three-level inverter application
Daniel Shan, Fairchild Semiconductor, China
P06
Step by Step Turning Procedure for Optimizing ZVS Phase-shifted Full-bridge Converter
Martin K. H. Cheung, Infineon Technologies HK Ltd., Hong Kong
P16
Modified Feeder Flow Control Method of BESS using Droop Control in Microgrid
Jin-Young Choi, Inha University, Republic of Korea
P07
The power supply requirement of 3D TV and proper power solution for this application
James Li, Fairchild Semiconductor, China
P17
A High Power Factor Primary Side Regulation Technology for Dimmable LED Lighting
Ming Chieh Lee, Fairchild Semiconductor, Taiwan
Kevin Hsueh, Fairchild Semiconductor, Taiwan
P08
Design A Low Power Electrolysis Power Supply with DCDC Converter
Jeff Qiu, Texas Instruments, China
P18
mW saver technology with 2nd DCM/CCM Synchronous Rectification to achieve
<30mW power consumption and high efficiency flyback converter
Mars Chiang, Fairchild Semiconductor, Taiwan
P19
The Features of Various PFC Control Techniques and Their Best Suited Applications
Sean Chen, Fairchild Semiconductor, Taiwan
P09
A New Synchronous Rectification Technique Suited for Multiple Mode in Flyback Topology
Kyle Wang, Fairchild Semiconductor, China
P10
A new wall dimmer topology for low-consumption lamps
Laurent Gonthier, STMicroelectronics, France
Special Session “E-Mobility and Charging”
Chairman: Gourab Majumdar, Mitsubishi Electric Corporation, Japan
Meeting Room 2
14:00 hrs
Battery Management Products Charging
Jiang Jiuchin, Beijing Jiaotong University, China
14:30 hrs
Motor Drive System
Xuhui Wen, Chinese Academy of Science, China
15:00 hrs
Advanced power devices for EV/HEV applications and their trends
Khalid Hussein, Mitsubishi Electric Corp., Japan
Song Gaosheng, Mitsubishi Electric & Electronic (Shanghai) Co. Ltd., China
15:30 hrs
Fast DC charging of electric vehicles:
Requirements of the chargers, standards and actual situation in Europe
Enrique Dede, IFIC University of Valencia, Spain
16:00 hrs
General Technological Trends of Systems Developed for Eco-Cars, Hybrid Vehicles, Plug-in
Hybrids and Electric Vehicles
Shinichi Matsumoto, Toyota Motor Engineering & Manufacturing, China
Toyota Motor Corporation, Hybrid Vehicle Power Train Development Division, Japan
16:30 hrs
Panel Discussion
Thursday, 21.06.2012
Motor Drive and Electrical Vehicles
DC/DC Converter
Chairman: Xuhui Wen, Chinese Academy of Science, China
Meeting Room 2
Chairman: Xinbo Ruan, Huazhong University of Science and Technology, China
Meeting Room 11
09:30 hrs Robust Position Estimation for Full-Speed-Range Sensorless Controlled
IPMSM with Online MTPA Tracking Strategy
Gaolin Wang, Harbin Institute of Technology, China
09:30 hrs A DC/DC converter design based on accurate parasitic parameter
simulation
Feng Xu, Emerson Network, China
*Nominated for the Young Engineer Award
10:00 hrs Design of an FPGA-based Sensorless PM BLDC Motor Controller with
Rapid-Startup and Anti-Disturbance Algorithm
Cao Yingjian,18th Institute of China Academy, China
10:00 hrs A Novel High-Step-Down Buck Converter For Non-isolated LED Power
Terry Zhou, Fairchild Semiconductor, China
10:30 hrs The New 6-pack 650V/600A IGBT Module with High Thermal Conductivity
and High Reliability for Electric and Hybrid Vehicles
Tomohiro Maruyama, Fuji Electric Co., Ltd, Japan
10:30 hrs A New 600V-Class Power Management IC Realizing a System Downsizing
for Current Resonant Type Converters
Masaharu Yamaji, Fuji Electric, Japan
11:00 hrs The Design Concept of Complete Traction Electric Equipment Sets for
Hybrid Vehicles
Stanislav Florentsev, Ruselprom – Electric Drive, Russia
11:00 hrs Novel circuit topology of phase-shift controlled ZCS high frequency
inverter and its performance evaluation
Hiroyuki Matsuo, Fuji Electric, Japan
11:30 hrs Coffee Break
11:45 hrs Keynote
High Reliability Power Electronics
Abhijit D. Pathak, International Rectifier, United States of America
12:30 Uhr Lunch Break
Special Session “Wind Power”
Chairman: Yongdong Li, Tsinghua University, China
Meeting Room 2
14:00 hrs Status and Trends in Wind Power Converters
Yongdong Li, Tsinghua University, China
14:30 hrs Wind power conversion – system perspective
Tan Zhuohui, General Electric, China
15:00 hrs Power Electronics in Wind Power - Opportunities and Challenges
Qing Chen, Delta Energy Nanjing, China
15:30 hrs Panel Discussion
Meeting Room 2