1080HD Handlebar Controls (Left-hand Control)
1000+ heavy-duty combinations
Honeywell’s platform approach creates a customized
left- or right-hand control in a cost efficient, qualified
production cycle when OEM product design cycles are
short.
To meet requirements for aesthetic differentiation,
Honeywell developed three patent-pending designs that
can be applied to the 1080HD Series handlebar controls.
Left-hand control customization options
1
7
7-function control
• Four-position: off, side marker lights, low beam, high beam
• Three-position: off, low beam, high beam
• Three-position: side marker lights, low beam, high beam
• Two-position: low beam, high beam
• Custom circuits also available
• Customizable button color and/or icon options
3
2
1
8
10
6
4
9
2
3
3
1
6
4
5
5
3
5-function control
Left Momentary Push Switch
• Customizable button color and/or icon options
1
6
10
6
9
Right Momentary Push Switch
• Optional function
• Customizable button color and/or icon options
4
9
Two-Position Rocker Switch
• Optional function
• Customizable button color and/or icon options
8
10
Forward Facing Momentary Switch
• Optional function
• Circuit can be isolated if the headlight switch is a two-position
switch
• Customizable button color
5
7
6-function control
Headlight Switch/Slider Switch
• Standard 3-position switch
8
• Optional two-position switch
• Customizable button color and/or icon options
4
5
Front Facing Slider Switch
7
Pull On – Push Off Switch
• Optional function
• Tall/Short button
• Customizable button color and/or icon options
1
4-function control
8
10
8
9
5
Wire Harness
• Custom lengths available
• 20 to 16 gage wire options
6
• Wire color options available
• Connector type fully customizable
4
9
Accessory Mounting Features
• Located on bottom of control
1
• Allows for optional accessory modules
- Air-flow choke
- Custom auxiliary function control
3-function control
10
6
8
10
9
Sensing and Control
5
Electrical Circuit Customizations
• Customer-specific circuitry
1080HD Handlebar Controls (Right-hand Control)
1000+ heavy-duty combinations
Honeywell’s platform approach creates a customized
left- or right-hand control in a cost efficient, qualified
production cycle when OEM product design cycles are
short.
To meet requirements for aesthetic differentiation,
Honeywell developed three patent-pending designs that
can be applied to the 1080HD Series handlebar controls.
Right-hand control customization options
5
1
• No switch version
• Two-position: A or B circuit
• Three-position: A, B A+B circuit
• Three-position: special circuit
• Custom circuits also available
• Customizable button color and/or icon options
2
4
1
3
6
Slider Switch
3-position control
2
Travel Distance Adjustable Throttle Pull
• Travel distance can be factory set to customer specification
• Field-adjustable with set screw
5
3
2
4
• Custom lengths available
• Wire color options available
• 20 to 18 gage wire options
• Connector type fully customizable
1
3
6
2-position control
Wire Harness
4
Throttle Cable Seating
• Can be customized to fit any size or thread type
2
5
Runaway Prevention Switch
• Provision for optional switch
5
6
5
2
4
basic control
Electrical Circuit Customizations
• Custom circuit designs allow for customer-specific electrical
customization
4
Find out more
For more information about sensing
and control products, visit
www.honeywell.com/sensing or call
+1-815-235-6847. Email inquiries to
info.sc@honeywell.com
Honeywell Sensing and Control
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com
006173-1-EN IL50 GLO March 2009
Copyright © 2009 Honeywell International Inc. All rights reserved.