WELCOME
FLIPS™ XB are transforming the way you interact with your music. Listen alone in Headphone Mode or flip
to share your music with others in Speaker Mode. Powerful neodymium speakers blast sound like a boom
box, with an added bass resonator to really make them loud!
CONTENTS
(1) FLIPS™ XB headphones, (1) USB cable, (1) travel case, (1) removable audio cable with microphone.
INSTRUCTIONS
Turn the volume of your music device all the way down. Plug in and wear as headphones. Increase volume
slowly to the desired level. You can adjust the band to fit.
The unique feature of the FLIPS™ XB headphones is that you can use as ordinary headphones but also
share your music like a boom box. Remove headphones from your head. With your music device
connected, place on a flat surface and flip both ear cups out (BOTH ear cups must be rotated) to activate
the external speakers. The LED light will turn blue to indicate speaker mode activation. Adjust ear cups to
desired angle and increase to desired volume. Your music will blast out at a higher volume for all to hear.
Flipping back to Headphone Mode is as simple as rotating the ear cups back to their original position.
Make sure the blue LED light is off prior to placing on your head. Always leave in headphone or collapsed
storage position to automatically preserve battery life. In Speaker Mode, your FLIPS™ XB will shut off
automatically after 6 minutes without an audio signal from your device.
RECHARGING
Unlike most unpowered headphones, FLIPSTM XB combines a headphone with a powerful amplified
speaker. The speaker is energized by a durable rechargeable Li Polymer battery. Like all batteries, it
will eventually need recharging. The blue blinking LED will signal it is time for a charge to continue
use in speaker mode. Recharging is simple- flip out the speaker on the side with the audio jack, to
expose the USB port. Plug the supplied micro USB cable into this port, and the other end into a USB
charger or any other USB powered device (not included).
A blinking RED LED light will turn on during charging, and turn SOLID RED when fully charged. This
will take approx. 3 hrs. You may charge while also listening to music in Speaker Mode, although
charging time may increase.
The longer you listen to music in Speaker Mode, or the louder
the volume, the more often you should recharge your
FLIPSTM XB. If the volume decreases or stops in Speaker Mode,
the blinking blue LED will indicate the headset should be
recharged. Note the FLIPSTM XB will still function perfectly in
headset mode for many hours of enjoyment, even if the battery
power is low. However, you should recharge as soon as
possible to make sure the FLIPSTM XB continues to work in
Headset Mode.
Flipping into Headphone Mode, or collapsing for storage,
automatically reduces power for longest battery life. Your
FLIPS™ XB will shut off automatically after 6 minutes without an
audio signal from your device.
USB Port
LED INDICATIONS
MODEL
FlipsXB
Headphone Mode
REMOVABLE AUDIO CABLE WITH MICROPHONE
The removable audio cable includes a microphone for use with a mobile phone. For the microphone
to work properly, the cable should be plugged into the Flips™ XB using the plug closest to the
microphone. The end away from the microphone plugs into the cell phone.
The microphone on the audio cable includes a button for activating and toggling Play/Pause for the
music player on most mobile phones. When a phone call is received, pressing the button once
answers the call. Pressing the button a second time drops the call.
The plug closest to the microphone has 2 black spacers between the metal contacts. The plug that
goes into the mobile phone has 3 white spacers between the metal contacts.
PHONE
STORAGE
Plug with 2 black spacers
MICROPHONE HOUSING
SPECIFICATIONS
HD Sound
Speaker Type - Neodymium
Speaker Diameter - 40mm
Speaker Impedance - 4Ω
Distortion - <2%
Connectivity - 3.5mm Jack
Foam type - Memory
Battery Type - 3.7V, 600mAH Li-Polymer Battery
Charging - Micro USB - 5V 500mA
Operating Temperature Range: 32˚F to 104˚F (0˚c-40˚c)
Your FLIPS™ headphones come supplied with a durable zippered storage case. Please take care and
store in the case for travel and when not in use. Do not leave the USB charging cable connected while
in storage. Do not leave the FLIPS™ headphones in the Speaker Mode (open) position while not in
use. This will drain the battery. Store in a cool dry place.
Fold to store in case
RESPONSIBLE USE:
Warning: Headphones in general diminish and mask the sounds around you. Do not wear headphones, or
play at high volume close to ears in Speaker Mode, while operating machinery, driving, cycling, sport
activities, or any activity that requires alertness to surroundings and/or could compromise safety. Do not
expose to harsh conditions, water, or immerse in water.
PLAY / PAUSE button
(ANSWER / DROP)
Storage Case
LED Color
Charging
BLINKING RED
Charge is complete
RED
Playing in Speaker Mode
BLUE
Charge needed for
Speaker Mode
BLINKS BLUE
Playing in Speaker Mode and
Charging at the same time
ALTERNATES BETWEEN
No Charging Cable Connected
RED LED OFF
BLUE AND RED
IMPORTANT SAFETY INFORMATION
Please follow the instructions in this manual carefully. It will help you
properly use your new FLIPS™ XB. Please save this instruction manual
for future reference.
· To reduce the risk of fire or electric shock, do not disassemble
the FLIPS™ XB or expose to rain
or moisture.
· Do not expose FLIPS™ XB to extreme temperatures. If the unit is exposed to
excessive heat, the battery can catch fire and explode.
· Do not place FLIPS™ XB in direct sunlight or store it inside car in hot weather as this could result in loss of
performance and a shortened battery life expectancy. High temperatures may cause the battery to generate
heat, rupture or ignite. Using the unit in this manner may result in a loss of performance and a shortened
battery life expectancy.
· Do not hit FLIPS™ XB with a hammer, step on, throw or drop it to expose the unit to a strong shock. Do
not pierce the unit with a sharp object such as a nail. Do not crush, dent or deform your FLIPS™ XB
in anyway.
· Do not allow your FLIPS™ XB to get wet.
· Clean only with a dry cloth.
· Do not use these headphones when operating a motor vehicle on a public road, or where the
inability to hear outside sounds may present a danger to you or others.
· Only use attachments/accessories specified by the manufacturer.
LED
Light
Speaker Mode
HEADPHONES
Plug with 3 white spacers
Activity
SAFETY
HEARING LOSS INFORMATION
Exposure to loud sounds can cause damage to hearing. To help prevent hearing damage do not use
at full volume for prolonged periods of time. Hearing loss can be caused by sustained exposure to
sound levels at or above 85 decibels. Never place the headphones close to your ears at an
increased volume while in Speaker Mode.
Typical decibel range of common sounds:
150 Firecracker
120 Siren
110 Rock concert
90 Mower
85 Heavy city traffic
60 Normal Conversation
30 Whisper
Source: For more information, please visit the National Institute for Deafness for more information
concerning hearing loss.http://www.nidcd.nih.gov/health/hearing/pages/noise.aspx
NOTE
CUSTOMER SERVICE
DISTRIBUTED BY
In order to conserve power in Speaker Mode, FLIPSTM XB includes music detection, which turns
the FLIPSTM XB off after 6 minutes of no music. If the level from your music device is set too low,
FLIPSTM XB may not be able to detect it is receiving music. If FLIPSTM does not turn on in Speaker
Mode, but the blue LED is lit, try turning up the level of your music device.
If you experience any issues with your FLIPS™,
please do not return headphones to retailer.
Idea Village
Wayne, NJ 07470
Designed in America, Manufactured in China
© 2012 Idea Village
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FlipsTM XB are backed by a 90 day warranty.
Patents Pending
Please call FLIPS™ Customer Service
1-888-312-3232 or email us at
customerservice@flipsaudio.com
Our team is here to assist you with
any technical issues.
scan or visit
flipsaudio.com
@flipsaudio
/flipsaudio
/flipsaudio
Notice: Changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FLXBIM08082014