Type:
Project: _________________________________________ Qty: ___________
SMALL INTEGRAL II PENDANT SIPU • Fluorescent
Pendant
5" (127mm)
5/8"
(16mm)
28"
(711mm)
.P.
C
AX
45°
SIPU Small Integral II Pendant (uplight)
@
0°
12
M
4-11/16" (118mm)
8-5/16" (211mm)
MOUNTING- Machined aluminum aimable and lockable hub fittings are located at each
end of the reflector and transition to rigid pipe stems. See Mounting Details to the side
and on next page.
ELECTRICAL- Integral electronic HPF ballast, end of lamp life protection circuit, less than
10% THD, and thermally protected. Provide 90º C supply wire.
PROFILE- P1 (basic): Anodized, extruded aluminum specular reflector contained within
extruded housing with solid aluminum endcaps and stainless steel hardware. Optional
extruded aluminum glare control visors are combined with the P1 profile to create P2, P3,
and P5 profiles.
TYPE- Small profile with smooth detail.
Indoor; Non-gasketed, captive extruded aluminum door with window cut-out for
regressed lens.
Outdoor; Silicone gasketed lens, captive extruded aluminum door with window cut-out
for regressed lens.
Lens; Clear acrylic lens provided for both indoor and outdoor applications.
FINISHES- 6 stage pre-treated polyester powder coat painted finish. All hardware is
stainless steel.
PERFORMANCE- Asymmetric distribution provides a concentration of light on target
surface for smooth illumination. Maximum candlepower aimed 120° above nadir has
less 5% spill light within the 0-120° zone and less than 2% spill light within the 90-180°
zone.
Warranty
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/
CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Ordering Information
EXAMPLE: SIPU LSL 20FT MSL4 WL SI 1 28T5 120 IB P1 ALP
SIPU
SI
Series
SIPU
Small Integral II
Pendant Uplight
Linear Plan
Total Run Length
Max Section Length
Environment
Reflector Type
Number of Lamps
Source
LCB Linear Center
Balance
LLP Linear Longest
Possible
LSL Linear Same Length
__FT
MSL2
MSL3
MSL4
MSL5
MSL6
MSL8
INT Interior
WL Wet
Location
SI Small
Integral
1
2
14T5
17
21T5
24T5HO
25
28T5
Total
Run
Length
2FT Section Length
3FT Section Length
4FT Section Length
5FT Section Length
6FT Section Length
8FT Section Length
1 lamp
2 lamps
(cross section)
F14WT5
F17WT8
F21WT5
F24WT5HO
F25WT8
F28WT5
32
35T5
39T5HO
40
54T5HO
80T5HO
F32WT8
F35WT5
39WT5HO
F40WT8
F54WT5HO
F80WT5HO
Note: End sections in LCB or LLP linear plans may deviate
from chosen source depending on total run length.
Voltage
120
277
347*
Ballast
120 volt
277 volt
347 volt
(blank)
GEB10DIM
Standard
Ballast
Generic
Electronic
Dimming
Ballast
Emergency
Internal Shielding
Visor
(blank)
(blank)
IB
P1
P2
P3
P5
EMBI
EMBR
No Emergency
Ballast
Emergency Ballast
Integral Mount
Emergency Ballast
Remote Mount
No baffle
Internal
Baffle
Finish
Basic
Solid
Perforated
Short
ABP
ALP
CPF*
LGP
LSP
MBP
Special
Antique Brass
Aluminum (Matte)
Custom Paint Finish
Light Gold Iridescent
Light silver paint
Medium Bronze
PBP
PEW
PGP
SGB
SGW
Pale bronze paint
Pewter
Pale Gold
Semi Gloss Black
Semi-gloss white
MOD*
Modification /
Consult Factory
*Available by modification only, consult factory
Visit www.winonalighting.com for the most complete and current information.
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein
may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
All fixtures UL listed, USA and Canada
Rev. 03/19/15
SIPU
1
Type:
Project: _________________________________________ Qty: ___________
SMALL INTEGRAL II PENDANT SIPU • Fluorescent
Pendant
MOUNTING — SIPU – INTEGRAL BALLAST
Each integral ballast mount fixture requires its own individual junction box for supply power.
2-1/2"
(64mm)
SIPU (Uplight)
2-1/2"
(64mm)
L
(single)
2-1/2"
(64mm)
L
L
(left hand)
Lamp
Cross Section
1
1
1
1
2
2
One Lamp
(cross section)
One Lamp
(cross section)
Two Lamp
(cross section)
1
1
1
1
2
2
Mounting
Centers L
Weight
Lbs.
T8
T8
T8
T8
T8
T8
(1) F17W
(1) F25W
(1) F32W
(1) F40W
(2) F25W
(2) F32W
SIPW/U
28-1/4"
48-1/4"
52-1/4"
67-1/4"
77"
101"
14
16
19
22
25
31
T5 or T5/HO
T5 or T5/HO
T5 or T5/HO
T5 or T5/HO
T5 or T5/HO
T5 or T5/HO
(1) F14W or F24W
(1) F21W or F39W
(1) F28W or F54W
(1) F35W or F80W
(2) F21W or F39W
(2) F28W or F54W
26-11/16"
38-1/2"
50-5/16"
62-1/8"
73-1/2"
97-1/8"
14
16
19
22
25
31
(2) F24W
(2) F39W
(2) F54W
(2) F80W
(4) F39W
(4) F54W
26-11/16"
38-1/2"
50-5/16"
62-1/8"
73-1/2"
97-1/8"
14
16
19
22
25
31
24"
36"
48"
60"
72"
96"
24"
36"
48"
60"
72"
96"
2
2
2
2
4
4
(intermediate)
Lamp
Description
Lamp Code
24"
36"
48"
60"
72"
96"
T5/HO
T5/HO
T5/HO
T5/HO
T5/HO
T5/HO
2-1/2"
(64mm)
L
(right hand)
Linear Plan
Winona offers the ability to provide a continuous run plan to suit your
requirements by optionally offering three methods of configuration.
LSL Linear Same Length:
In this configuration each segment is the same length is standardized based
on the longest length available and is the only option provided. Because it is
dependent on one segment length there are mathematical limitations on what
overall row lengths can be achieved. Example: 20 FT row would be achieved
with (5) 4FT long segments equaling 20 FT (nominal).
LCB Linear Center Balanced:
This configuration incorporates the longest center segment(s) along with any
additional lengths required to fill located at each end. Example: 22FT row
would have (2) 3FT segments (one at each end) and (4) 4FT intermediate
segments located in between.
LLP Linear Longest Possible:
In this plan the longest length available is optimized resulting in the fewest
segments and mounting locations. Caution should be used where balanced
appearance is a concern. Example: 22FT row would have (5) 4 FT segments
and (1) 2 FT segment located at one end.
4'
LSL 20FT
LCB 22FT
LLP 22FT
4'
3'
2'
4'
4'
4'
Visit www.winonalighting.com for the most complete and current information.
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein
may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
4'
4'
4'
4'
4'
4'
4'
4'
3'
4'
All fixtures UL listed, USA and Canada
Rev. 03/19/15
SIPU
2