PROB – Providence Bollard
TYPE
• Die cast aluminum construction for reliability, robust construction and corrosion resistance
• IP66 Rating
• Powder coat finish in 13 standard colors with a polymer primer sealer
• Tool-less access and removal of lamp and ballast
• Direct full cutoff optical system
• Indirect asymmetric and symmetric cut-off optical systems
• Slips over a 3"/75mm pole for mounting
1. LUMINAIRE
2. LAMP/LED
3. COLOR
4. OPTIONS
5. MOUNTING
PROB
1.
LUMINAIRE
3. COLOR
SYMMETRIC HORIZONTAL OPTICAL SYSTEM
WH Arctic White
BL Black
BLT Matte Black
DB Dark Bronze
DGN Dark Green
TT Titanium
WDB Weathered Bronze
MDB Bronze Metallic
PROB
Providence bollard
2. LAMP/BALLAST
COMPACT FLUORESCENT (120 thru 277 volt ballast. Specify
wattage. -18°C minimum starting temp)
GX24q base, 26, 32 or 42 watt lamp
CF
METAL HALIDE (120/208/240/277 volt ballast)
Medium base, ED-17 lamp
70MH 100MH
50MH
G12 base, T-6 ceramic lamp
70MHT6
ELECTRONIC METAL HALIDE (120 thru 277 volt)
PGJ5 base, Mini Mastercolor lamp. 120 thru 277 volt ballast
39MMC
20MMC
Medium base, ED-17 lamp
50MHEB70MHEB 100MHEB
SPECIFICATIONS
VBU Verde Blue
CRT Corten
MAL Matte Aluminum
MG Medium Grey
AGN Antique Green
LG Light Grey
RAL Premium Color
CUSTOM * * Contact Factory
4.OPTIONS
PFC (Painted brass finial cap)
DSC (Dark sky cap. Matte black body cap)
BPS (Struts painted brass)
HSS (House side shield. )
LDL (Lightly diffused lens)
BBU (Battery backup powers the lamp for up to ninety minutes during
a power failure. Output of the 32 watt lamp will be 575 lumens.
Output from the 42 watt lamp will be 750 lumens. Operating
temperature 0ºC to 55ºC. For use with CF only)
G12 base, T-6 ceramic lamp
39MHT6EB 70MHT6EB
HIGH PRESSURE SODIUM (120/208/240/277 volt ballast)
Medium base, ED-17 lamp
50HPS70HPS 100HPS
All ballasts are factory wired for 277 volts unless specified. Lamps not
included, except LED option.
5. MOUNTING
FL (42" overall height x 5"/127mm dia, extruded fluted body)
RD (42" overall height x 5"/127mm dia, extruded smooth body)
PM (Semi recessed pier mount)
Visit www.aal.net for Arms, Poles & Accessories
Specification Guide
HOUSING
The fixture housing and base are cast aluminum
free of any porosity, foreign materials, or cosmetic
fillers. The shaft shall be 5 in/127 mm wide and
23 in/584 mm tall, extruded 6061-T6 aluminum
yielding a fixture height of 42 inches. The ballast
is mounted internally and accessed by loosening
three set screws and lifting the fixture head off the
shaft. Relamping is done by loosening a captive
screw on the side of the dome, directly opposite
the hinge, and tilting the dome lid back. The lens
is tempered glass, sealed to the housing with a
silicone gasket. All internal and external hardware
is stainless steel. The fixture is sealed to prevent
dust, insect or moisture contamination by using
one-piece, memory retentive, molded silicone
gaskets. The fixture features tamper resistant
hardware.
ELECTRICAL
The ballast is integral to the fixture, mounted
on a prewired module with a quick disconnect
plug. The ballast module has two keyhole slots
and is removable by loosening two screws. All
components and materials are U.L. recognized.
Sockets are pulse rated porcelain. HID ballasts
are high power factor, rated for -30°C starting.
Medium base porcelain sockets are 4KV
rated. Ballasts are wired at the factory for 277
volts, unless specified. Compact fluorescent
transformers are electronic, 120 through 277 volt
for 26, 32 or 42 watt 4 pin lamps.
REFLECTOR
The reflector module shall be composed of a
spun, specular aluminum panel rigidly attached
to the die cast aluminum housing. The horizontal
lamp reflectors shall meet ANSI-IES standards for
full cutoff classification.
See next page
JOB
TYPE
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | REV 2.15
NOTES
| 1 |
Photometric Report
PROB – Providence Bollard
TYPE
CATALOG NUMBER: PROB-50MH
Wednesday, July 11, 2012
FILENAME: PROB-50MH.IES
IESNA:LM-63-2002
DIMENSIONS
FINISH
[TEST] 24557
[TESTLAB] LIGHTING SCIENCES, INC.
Fixture finish shall consist of a five stage pretreatment
[ISSUEDATE] 12/18/08
regimen with a polymer primer sealer, oven dry off
and top 12/ 8/2008
[TESTDATE]
[MANUFAC]
coated with a thermoset super TGIC polyester powder
coatARCHITECTURAL AREA LIGHTING
[LUMCAT] PROB-50MH
16.83"/427mm
finish. The finish shall meet the AAMA 605.2 performance
[LUMINAIRE] CAST ALUMINUM BOLLARD WITH
[MORE]
specification which includes passing a 3000 hour
salt SPECULAR REFLECTOR AND CLEAR FLAT GLASS LENS
[LAMP] ONE 50WATT MH ED-17/ MED BASE
spray test for corrosion resistance.
[LAMPCAT] MH50W/U/PS-VENTURE
11.60"/294.64mm
[OTHER] LUMEN RATING = 3100
[LAMPPOSITION] HORIZONTAL
CERTIFICATION
The fixture is listed with ETL for outdoor, wet location
use, DATA
SUMMARY
UL1598 and Canadian CSA Std. C22.2 NO.250.
EFFICIENCY (Total):
IP Rating: 66
EFFICIENCY (Down / Up):
EFFICIENCY (Street / House):
ROADWAY CLASSIFICATION:
WARRANTY / TERMS AND CONDITIONS OF SALE
CUTOFF CLASSIFICATION:
Download:
LUMENS/LAMP:
NO. OF LAMPS:
http://www.hubbelllighting.com/resources/warranty/
LUMINOUS OPENING:
Diameter:
INPUT WATTS:
AAL reserves the right to change product specifications without notice.
42.44"/1,078mm
WT: 27 lbs / 12kg
35.4 %
35.4 % / 0.0 %
17.7 % / 17.7 %
TYPE I, VERY SHORT
FULL CUTOFF
3100
1
CIRCULAR
0.56 (Feet)
72
BOTTOM VIEW
Bottom View
PROB 50MH WATTAGE: 72
LUMEN OUTPUT: 1097
B1 U0 G0
Mounting 0%
UPLIGHT
Height
Multiplier
DOWNLIGHT
100%
------------------------
FORWARD LIGHT
LUMEN
9.9% 306
FL30 o
7.2%224
FM60 o
o
0.5%
FH80
16
0.1%2
FVH90 o
BACK LIGHT
BL30 o
BM60 o
BH80 o
BVH90 o
9.9% 7.2%
0.5% 0.1%
306
224
16
2
UPLIGHT
UL100 o
UH180 o
0% 0%
0
0
EFFICACY: 43
ISO-ILLUMINANCE DIAGRAM (fc)
0.05
0.1
0.2
0.01
0.02
1.
2.
0.5
10
15
20
25
30
35
40
45
50
4.000
1.778
1.000
0.640
0.444
0.327
0.250
0.198
0.160
+ = Point of max candela
4'
MOUNTING
Mounting
HeightHEIGHT
= 20 Feet. Each box represents one mounting height.
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
Photometric Viewer v3.4
IES files can be found at www.aal.net
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | REV 2.15
| 2 |