POLYSNAP® POWER INLET MODULES
Polysnap
®
Polysnap® offer combinations of mains inlets and outlets, filtered inlets,
switches, fuseholders, voltage selectors, indicators and circuit breakers
mounted in either horizontal or vertical format bezels ready for quick
snap-fit assembly. The compact design occupies the minimum of panel
area and a single rectangular mounting hole, offering easy installation
for this mains power entry module.
To complement Polysnap® the new Polyflange offers a flange fixing
alternative for designers who prefer the security of screw fixing.
All types and variations are available through Bulgin’s extensive
distribution network.
Type
Page
BZV Series
76-86
BZH Series
87-91
BZM Series
92
BVA & BVB Series
Filtered Bezel Options
www.bulgin.co.uk
93-94
95-100
73
IEC CONNECTORS
With over 26,000 combinations Bulgin’s Polysnap® mains power inlet
modules offer a very adaptable and flexible solution to panel design.
POLYSNAP® POWER INLET MODULES
Components used in Polysnap® and Polyflange Power Inlet Modules
Note: Components are Approved Individually (where applicable). Please see individual component pages for full specifications.
IEC CONNECTORS
IEC CONNECTORS, FUSEHOLDERS AND VOLTAGE SELECTORS
Type
Description
Rating
Approvals
DX0928
Neon Indicator
110V or 250V a.c./d.c. working
FX0359
5 x 20mm Fuseholder
Max. rating 10A. 250V
See Page 138
*
PF0011
C14 Power Inlet with Integral 5 x 20mm
Fuseholder
Max. rating 10A. 250V a.c.
See Page 54
PF0033
C14 Power Inlet with Integral twin 5 x 20mm
Fuseholder
Max. rating 10A. 250V a.c.
See Page 55
PX0575
C14 Power Inlet, Cold condition
Max. rating 10A. 250V a.c.
See Page 50
PX0595
C16 Power Inlet, Hot Condition
Max. rating 10A. 250V a.c.
See Page 56
PX0695
Sheet F Power Outlet
Max. rating 10A. 250V a.c.
See Page 63
PX0783
Sheet F Shuttered Power Outlet
Max. rating 10A. 250V a.c.
See Page 64
PX0598
C20 Power Inlet
Max. rating 16A, 250V a.c.
See Page 59
VS0001
Voltage Selector marked 120/240V
Max. rating 6.3A. 120/240V a.c.
See Page 176
*Pending
SWITCHES, INDICATORS AND CIRCUIT BREAKERS
No Poles
Single Pole
Double Pole
Illumination
Current Ratings
Circuit
Non-illuminated
Max. rating 16A Resistive, 4A Inductive, 250Vac.
High Inrush
Max. rating 16A Resistive, 4A Inductive, 250Vac.
Inrush current, 150A to IEC65.
Illuminated
Max. rating 16A Resistive, 4A Inductive, 250Vac.
1
1
4
Approvals
1
2
2
3
Non-illuminated
Max. rating 16A Resistive, 4A Inductive, 250Vac.
High Inrush
Max. rating 16A Resistive, 4A Inductive, 250Vac.
Inrush current, 150A to IEC65.
Illuminated
Max. rating 16A Resistive, 4A Inductive, 250Vac.
250Vac Neon.
4
Non-illuminated
Max. rating 10A Resistive, 4A Inductive, 250Vac.
1a
2a
Illuminated
Max. rating 10A Resistive, 4A Inductive, 250Vac.
250Vac Neon.
1a
3b
2a
Non-illuminated
Max. rating 10A Resistive, 4A Inductive, 250Vac.
1
4
2
High Inrush
Max. rating 10A Resistive, 4A Inductive, 250Vac.
Inrush current, 85A to EN61058-1.
1a
2a
3b
4b
2
5
2
1
5
For Mini Bezel:
Single Pole
Double Pole
Illuminated
Indicator
Circuit Breaker
74
2
1
Max. rating 10A Resistive, 4A Inductive, 250Vac.
250Vac Neon.
4
250Vac neon lamp connected internally to terminals.
1
5
3
2
Non-illuminated
Illuminated
5
125Vac and 250Vac Neons.
3
1
2
1
www.bulgin.co.uk
POLYSNAP® POWER INLET MODULES
OVERVIEW OF POLYSNAP MODULES
C14
C14 Fused
INLETS
C16
C20
OUTLETS
Sheet F
With SP switch
Page 78
With SP switch
Page 76
With SP switch
Page 78
With SP switch
Page 83
With SP switch
Page 85
With Circuit
Breaker
Page 79
With Circuit
Breaker
Page 79
With Circuit
Breaker
Page 86
With other
components
Pages 80, 81, 82
With other
components
Pages 80, 81, 82
Style
Snap to Panel Vertical
INLETS/OUTLETS
C14
C14 Fused
Snap to Panel Horizontal
With SP switch
Page 87
With DP Switch
Page 88
Mini Bezel
With SP Switch
Page 92
IEC CONNECTORS
With DP Switch
Page 77
With other
components
Page 84
With SP switch
Page 89
With DP switch
Page 90
No additional
components
Page 91
Mini Bezel
With DP Switch
Page 92
Flange Mount Vertical
With SP switch
Page 93
With DP switch
Page 94
www.bulgin.co.uk
75
POLYSNAP® POWER INLET MODULES
C14 IEC Fused Inlet - Vertical
VERTICAL MODULE ARRANGEMENT
Fused Inlet with 2.8mm or
6.3mm tags
Single Pole Switch Variations
Filtered Inlet Option
Options of I/O marked
switches
IEC CONNECTORS
BZV01/Z0000/01
How to Order
BZV xx / xxxxx / xx
Type of Inlet / Outlet
Filtered or Non Filtered Inlet
Combination of Other Components
Single Fused C14 Power Inlet (cold condition),
6.3 or 2.8mm tabs:
Z0000 = Non Filtered
Single Pole Switch:
Axxxx = Standard
01 = S.P. Switch
01 = PF0011/63
02 = PF0011/28
Twin Fused C14 Power Inlet (cold condition),
6.3 or 2.8mm tabs:
Bxxxx = Medical
Single Pole Neon Switch:
Cxxxx = High Performance Standard
(Single Fuse Version only)
02 = S.P. Red Neon Switch
08 = S.P. Green Neon Switch
Neon Indicator:
15 = PF0033/63
16 = PF0033/28
03 = Red Neon Indicator
Single Pole High Inrush Switch:
46 = S.P. High Inrush Switch
For Filtered inlet use 6th to 9th characters from filter
Single Pole Switch Marked I/O:
ordering code see pages 97-100.
69 = S.P. Switch (I/O)
E.g. BZV01/A0620/01
Single Pole Neon Switch Marked (I/O):
71 = S.P. Red Neon Switch (I/O)
74 = S.P. Green Neon Switch (I/O)
Single Pole High Inrush Switch Marked (I/O):
98 = S.P. High Inrush Switch (I/O)
Note: For technical details of individual components please see page 74
76
www.bulgin.co.uk
POLYSNAP® POWER INLET MODULES
C14 IEC Fused Inlet - Vertical
VERTICAL MODULE ARRANGEMENT
Fused Inlet with 2.8mm or
6.3mm tags
Double Pole Switch or
Indicator Variations
Filtered Inlet Option
Options of I/O marked
switches
How to Order
BZV xx / xxxxx / xx
Type of Inlet / Outlet
Filtered or Non Filtered Inlet
Combination of Other Components
Single Fused C14 Power Inlet (cold condition),
6.3 or 2.8mm tabs:
Z0000 = Non Filtered
Neon Indicator:
Axxxx = Standard
D3 = Red Neon Indicator
01 = PF0011/63
02 = PF0011/28
Twin Fused C14 Power Inlet (cold condition),
6.3 or 2.8mm tabs:
Bxxxx = Medical
Double Pole Switch:
Cxxxx = High Performance Standard
(Single Fuse Version only)
10 = D.P. Switch
Double Pole Neon Switch:
15 = PF0033/63
16 = PF0033/28
11 = D.P. Red Neon Switch
12 = D.P. Green Neon Switch
Double Pole High Inrush Switch:
13 = D.P. High Inrush Switch
For Filtered inlet use 6th to 9th characters from filter
ordering code see pages 97-100.
E.g. BZV01/A0620/10
Double Pole Switch Marked I/O:
70 = D.P. Switch (I/O)
Double Pole Neon Switch Marked (I/O):
76 = D.P. Red Neon Switch (I/O)
77 = D.P. Green Neon Switch (I/O)
Double Pole High Inrush Switch Marked
(I/O):
78 = D.P. High Inrush Switch (I/O)
B1 = D.P. High Inrush Green Neon Switch
(I/O)
Note: For technical details of individual components please see page 74
www.bulgin.co.uk
77
IEC CONNECTORS
BZV01/Z0000/10
POLYSNAP® POWER INLET MODULES
C14 and C16 IEC Inlet - Vertical
VERTICAL MODULE ARRANGEMENT
Inlet with 2.8mm or 6.3mm
tags
Single Pole Switch or Neon
Indicator Variations
Filtered Inlet Option
IEC CONNECTORS
BZV03/Z0000/02
How to Order
Options of I/O marked
switches
Non Fused
BZV xx / xxxxx / xx
Type of Inlet / Outlet
Filtered or Non Filtered Inlet
Combination of Other Components
C14 Power Inlet (cold condition), 6.3 or 2.8mm
tabs:
Z0000 = Non Filtered
Single Pole Switch:
Axxxx = Standard
01 = S.P. Switch
03 = PX0575/63
04 = PX0575/28
Bxxxx = Medical
Single Pole Neon Switch:
02 = S.P. Red Neon Switch
08 = S.P. Green Neon Switch
C16 Power Inlet (hot condition), 6.3 or 2.8mm
tabs:
05 = PX0595/63
06 = PX0595/28
Neon Indicator:
03 = Red Neon Indicator
Single Pole High Inrush Switch:
Please note type 05 and 06 are not available in
filtered version
46 = S.P. High Inrush Switch
For Filtered inlet use 6th to 9th characters from
filter ordering code see pages 95-96.
E.g. BZV03/A0120/02
Single Pole Switch Marked I/O:
69 = S.P. Switch (I/O)
Single Pole Neon Switch Marked (I/O):
71 = S.P. Red Neon Switch (I/O)
74 = S.P. Green Neon Switch (I/O)
Single Pole High Inrush Switch Marked
(I/O):
98 = S.P. High Inrush Switch (I/O)
Note: For technical details of individual components please see page 74
78
www.bulgin.co.uk
POLYSNAP® POWER INLET MODULES
C14 and C16 IEC Inlet with Circuit Breaker
VERTICAL MODULE ARRANGEMENT
Inlet with 2.8mm or 6.3mm
tags
Single pole circuit breaker
Illuminated (red or green)
and non-illuminated rocker
switch
125Vac and 250Vac Neons
BZV03/Z0000/C1/T
6.3mm tabs on Circuit
Breaker
How to Order
Panel Thickness: 1.0, 1.5, 2.0, 3.0mm.
Type of Inlet
Filtered or Non Filtered
Switch Button
Trip Current
C14 power inlet (cold condition), 6.3 or
2.8mm tabs:
Z0000 = Non Filtered
C1 = non-illuminated
Q = 5.0A
Axxxx = Standard
C2 = red neon (125Vac)
T = 8.0A
C3 = green neon (125Vac)
U = 10.0A
C4 = red neon (250Vac)
X = 15.0A
03 = PX0575/63
04 = PX0575/28
C16 power inlet (hot condition), 6.3 or 2.8mm
tabs:
IEC CONNECTORS
BZV xx / Zxxxx / xx x
C5 = green neon (250Vac)
05 = PX0595/63
06 = PX0595/28
Please note type 05 and 06 are not available in
filtered version
Note: For technical details of individual components also see page 74
Trip Curves
Load Current as a Percent
of Circuit Breaker Rating
% 1000
Capacity Correction Factors for Ambient Temperatures
Current Rating 5 to 15A
900
800
700
600
500
400
Temperature ˚C
-10
-20
-25
-30
-40
-50
-60
Correction Factor
.90
.95
1.00
1.10
1.32
1.61
2.15
300
200
135
100
0
0.1
1
10
100
1000
10000
Circuit Breaker Approvals:
Time in Seconds
Trip Curves are Specified at 25˚C/77˚F
www.bulgin.co.uk
79
POLYSNAP® POWER INLET MODULES
C14 and C16 IEC Inlet - Vertical
VERTICAL MODULE ARRANGEMENT
Inlet with 2.8mm or 6.3mm
tags
Double Pole Switch/
Fuseholder/Indicator/
Voltage Selectors/
Blanking Plate
Filtered Inlet Option
BZV03/Z0000/07
Options of I/O marked
switches
IEC CONNECTORS
How to Order
BZV xx / xxxxx / xx
Type of Inlet / Outlet
Filtered or Non Filtered Inlet
C14 Power Inlet (cold
condition), 6.3 or 2.8mm
tabs:
Z0000 = Non Filtered
03 = PX0575/63
04 = PX0575/28
Bxxxx = Medical
Axxxx = Standard
C16 Power Inlet (hot
condition), 6.3 or 2.8mm
tabs:
05 = PX0595/63
06 = PX0595/28
Combination of Other Components
Twin Fuseholder and Double Pole
Switch:
05 = 2 x FX0359 + D.P. Switch
Twin Fuseholder and Double Pole Neon
Switch:
06 = 2 x FX0359 + D.P. Red Neon
Switch
09 = 2 x FX0359 + D.P. Green Neon
Switch
19 = 2 x FX0359 + D.P. Red Neon
Switch 125V
Twin Fuseholder and Neon Indicator:
07 = 2 x FX0359 + Red Neon
Indicator
Please note type 05 and
06 are not available in
filtered version
For Filtered inlet use 6th to 9th
characters from filter ordering code
see pages 95-96.
E.g. BZV03/A0120/07
Voltage Selector, Fuseholder and Double
Pole Switch:
15 = 1 x VS0001 + 1 x FX0359 +
Double Pole switch
Voltage Selector, Fuseholder and Double
Pole Neon Switch:
16 = 1 x VS0001 + 1 x FX0359 + D.P.
Red Neon Switch
18 = 1 x VS0001 + 1 x FX0359 + D.P.
Green Neon Switch
Voltage Selector, Fuseholder and Neon
Indicator:
17 = 1 x VS0001 + 1 x FX0359 + Red
Neon Indicator
Twin Fuseholder and Double Pole High
Inrush Switch:
20 = 2 x FX0359 + D.P. High Inrush
Switch
Twin Fuseholder and Double Pole High
Inrush Neon Switch:
21 = 2 x FX0359 + 1 x D.P. High
Inrush Green Neon Switch
22 = 2 x FX0359 + 1 x D.P. High
Inrush Red Neon Switch
Voltage Selector, Neon Indicator and
Double Pole Switch
25 = 1 x VS0001 + 1 x
DX0928/110V/Red + D.P. Switch
26 = 1 x VS0001 + 1 x
DX0928/110V/Green + D.P. Switch
27 = 1 x VS0001 + 1 x
DX0928/250V/Red + D.P. Switch
28 = 1 x VS0001 + 1 x
DX0928/250V/Green + D.P. Switch
Voltage Selector, Neon Indicator and
Double Pole High Inrush Switch:
29 = 1 x VS0001 + 1 x
DX0928/250V/Red + D.P. High Inrush
Switch
30 = 1 x VS0001 + 1 x
DX0928/250V/Green + D.P. High
Inrush Switch
Fuseholder, Neon Indicator and Double
Pole Switch
31 = 1 x FX0359 + 1 x
DX0928/110V/Red + D.P. Switch
32 = 1 x FX0359 + 1 x
DX0928/110V/Green + D.P. Switch
33 = 1 x FX0359 + 1 x
DX0928/250V/Red + D.P. Switch
34 = 1 x Fx0359 + 1 x
DX0928/250V/Green + D.P. Switch
Fuseholder, Neon Indicator and Double
Pole High Inrush Switch:
35 = 1 x FX0359 + 1 x
DX0928/250V/Red + D.P. High Inrush
Switch
36 = 1 x FX0359 + 1 x
DX0928/250V/Green + D.P. High
Inrush Switch
Fuseholder, Blanking Plate and Double
Pole High Inrush Neon Switch:
47 = 1 x FX0359 + 1 x Blanking Plate
(Right) + D.P. High Inrush Green Neon
Switch
Fuseholder, Blanking Plate and Double
Pole Switch:
48 = 1 x FX0359 + 1 x Blanking Plate
(Right) + D.P. Switch
80
www.bulgin.co.uk
POLYSNAP® POWER INLET MODULES
C14 and C16 IEC Inlet - Vertical
VERTICAL MODULE ARRANGEMENT
Inlet with 2.8mm or 6.3mm
tags
Double Pole Switch/
Fuseholder/Indicator/
Voltage Selectors/
Blanking Plate
Filtered Inlet Option
BZV03/Z0000/07
Options of I/O marked
switches
How to Order
Type of Inlet / Outlet
Filtered or Non Filtered Inlet
C14 Power Inlet (cold
condition), 6.3 or 2.8mm
tabs:
Z0000 = Non Filtered
03 = PX0575/63
04 = PX0575/28
Bxxxx = Medical
Axxxx = Standard
C16 Power Inlet (hot
condition), 6.3 or 2.8mm
tabs:
05 = PX0595/63
06 = PX0595/28
Combination of Other Components
Twin Fuseholder and Double Pole Switch
Marked I/O:
72 = 2 x FX0359 + D.P. Switch (I/O)
Twin Fuseholder and Double Pole Neon
Switch Marked I/O:
73 = 2 x FX0359 + D.P. Red Neon
Switch (I/O)
75 = 2 x FX0359 + D.P. Green Neon
Switch(I/O)
82 = 2 x FX0359 + D.P. Red Neon
Switch 125V(I/O)
Voltage Selector, Fuseholder and Double
Pole Switch Marked (I/O):
79 = 1 x VS0001 + 1 x FX0359 +
Double Pole switch (I/O)
Please note type 05 and
06 are not available in
filtered version
For Filtered inlet use 6th to 9th
characters from filter ordering
code see pages 95-96.
E.g. BZV03/A0120/07
Voltage Selector, Fuseholder and Double
Pole Neon Switch Marked (I/O):
80 = 1 x VS0001 + 1 x FX0359 + D.P.
Red Neon Switch (I/O)
81 = 1 x VS0001 + 1 x FX0359 + D.P.
Green Neon Switch (I/O)
Twin Fuseholder and Double Pole High
Inrush Switch Marked (I/O):
83 = 2 x FX0359 + D.P. High Inrush
Switch (I/O)
Twin Fuseholder and Double Pole High
Inrush Neon Switch Marked (I/O):
84 = 2 x FX0359 + 1 x D.P. High
Inrush Green Neon Switch (I/O)
85 = 2 x FX0359 + 1 x D.P. High
Inrush Red Neon Switch (I/O)
Voltage Selector, Neon Indicator and
Double Pole Switch Marked (I/O):
86 = 1 x VS0001 + 1 x
DX0928/110V/Red + D.P. Switch (I/O)
87 = 1 x VS0001 + 1 x
DX0928/110V/Green + D.P. Switch
(I/O)
88 = 1 x VS0001 + 1 x
DX0928/250V/Red + D.P. Switch (I/O)
89 = 1 x VS0001 + 1 x
DX0928/250V/Green + D.P. Switch
(I/O)
www.bulgin.co.uk
Voltage Selector, Neon Indicator and
Double Pole High Inrush Switch Marked
(I/O):
90 = 1 x VS0001 + 1 x
DX0928/250V/Red + D.P. High Inrush
Switch(I/O)
91 = 1 x VS0001 + 1 x
DX0928/250V/Green + D.P. High
Inrush Switch(I/O)
Fuseholder, Neon Indicator and Double
Pole Switch Marked (I/O)
92 = 1 x FX0359 + 1 x
DX0928/110V/Red + D.P. Switch (I/O)
93 = 1 x FX0359 + 1 x
DX0928/110V/Green + D.P. Switch
(I/O)
94 = 1 x FX0359 + 1 x
DX0928/250V/Red + D.P. Switch (I/O)
95 = 1 x FX0359 + 1 x
DX0928/250V/Green + D.P. Switch
(I/O)
Fuseholder, Neon Indicator and Double
Pole High Inrush Switch Marked (I/O):
96 = 1 x FX0359 + 1 x
DX0928/250V/Red + D.P. High Inrush
Switch (I/O)
97 = 1 x FX0359 + 1 x
DX0928/250V/Green + D.P. High
Inrush Switch (I/O)
Fuseholder, Blanking Plate and Double
Pole High Inrush Neon Switch Marked
(I/O):
99 = 1 x FX0359 + 1 x Blanking Plate
(Right) + D.P. High Inrush Green Neon
Switch (I/O)
Fuseholder, Blanking Plate and Double
Pole Switch Marked (I/O):
A0 = 1 x FX0359 + 1 x Blanking Plate
(Right) + D.P. Switch (I/O)
B2 = 1 x VS0002 + 1 x Blanking Plate
81
IEC CONNECTORS
BZV xx / xxxxx / xx
POLYSNAP® POWER INLET MODULES
C14 and C16 IEC Inlet - Vertical
VERTICAL MODULE ARRANGEMENT
Inlet with 2.8mm or 6.3mm
tags
Fuseholder/Voltage
Selector/Indicator
options/Blanking plate
Filtered Inlet Option
IEC CONNECTORS
BZV04/Z0000/04
How to Order
BZV xx / xxxxx / xx
Type of Inlet / Outlet
Filtered or Non Filtered Inlet
Combination of Other Components
C14 Power Inlet (cold condition), 6.3 or
2.8mm tabs:
Z0000 = Non Filtered
Twin Fuseholder:
Axxxx = Standard
04 = 2 x FX0359
03 = PX0575/63
04 = PX0575/28
Bxxxx = Medical
Voltage Selector and Fuseholder:
14 = 1 x VS0001 + 1 x FX0359
C16 Power Inlet (hot condition), 6.3 or 2.8mm
tabs:
Voltage selector and Neon:
05 = PX0595/63
06 = PX0595/28
37
38
39
40
Please note type 05 and 06 are not available in
filtered version
=
=
=
=
1
1
1
1
x
x
x
x
VS0001
VS0001
VS0001
VS0001
+
+
+
+
DX0928/110V/Red
DX0928/110V/Green
DX0928/250V/Red
DX0928/250V/Green
Fuseholder and Neon:
For Filtered inlet use 6th to 9th characters from
filter ordering code see pages 95-96.
E.g. BZV04/A0120/04
41
42
43
44
=
=
=
=
1
1
1
1
x
x
x
x
FX0359
FX0359
FX0359
FX0359
+
+
+
+
DX0928/110V/Red
DX0928/110V/Green
DX0928/250V/Red
DX0928/250V/Green
Fuseholder and Blanking Plate:
45 = 1 x FX0359 + Blanking Plate
B2 = 1 x VS0001 + Blanking Plate
Note: For technical details of individual components please see page 74
82
www.bulgin.co.uk
POLYSNAP® POWER INLET MODULES
C20 IEC Inlet - Vertical
VERTICAL MODULE ARRANGEMENT
Inlet with 4.8mm or 6.3mm
tags
Single Pole Switch marked
I/O
Illuminated, red or green,
switches
How to Order
High inrush non-illuminated
switch
Panel Thickness: 1.0, 1.5, 2.0, 3.0mm.
BZV xx / xxxxx / xx
Type of Inlet
Filtered or Non Filtered Inlet
Combination of Other Components
C20 Power Inlet (cold condition), 4.8 or
6.3mm tabs:
Z0000 = Non Filtered
Single Pole Switch:
49 = PX0598/63
50 = PX0598/48
01 = S.P. Switch
Single Pole Switch Marked (I/O):
69 = S.P. Switch (I/O)
Single Pole Illuminated Switch:
02 = S.P. Illuminated Red
08 = S.P. Illuminated Green
Single Pole Non-illuminated High Inrush
Switch Marked I/O:
98 = S.P. High Inrush Switch (I/O)
Single Pole Illuminated (Red or Green 250v
Neon) Switch Marked I/O:
71 = S.P. Switch Illuminated Red (I/O)
74 = S.P. Switch Illuminated Green (I/O)
Note: For technical details of individual components please see page 74
www.bulgin.co.uk
83
IEC CONNECTORS
BZV49/Z0000/69
POLYSNAP® POWER INLET MODULES
C14 IEC Inlet/Sheet F IEC Outlet - Vertical
VERTICAL MODULE ARRANGEMENT
Inlet/Outlet Combination
2.8mm or 6.3mm tags
Filtered Inlet and Blanking
Plate options
Shuttered or Non-shuttered
Outlet
IEC CONNECTORS
BZV09/Z0000/04
How to Order
Fused
BZV xx / xxxxx / xx
Type of Inlet / Outlet
Filtered or Non Filtered Inlet
Combination of Other Components
C14 Power Inlet (cold condition) and Sheet F
Non-shuttered Power Outlet, 2.8 or 6.3mm tabs:
Z0000 = Non Filtered
Twin Fuseholder:
Axxxx = Standard
04 = 2 x FX0359
09 = PX0575/63 + PX0695/63
10 = PX0575/28 + PX0695/28
Bxxxx = Medical
Voltage Selector and Fuseholder:
14 = 1 x VS0001 + 1 x FX0359
C14 Power Inlet (cold condition) and Sheet F
Shuttered Power Outlet, 2.8 or 6.3mm tabs:
Voltage selector and Neon:
17 = PX0575/63 + PX0783/63
18 = PX0575/28 + PX0783/28
37
38
39
40
For Filtered inlet use 6th to 9th characters from
filter ordering code see pages 95-96.
E.g. BZV09/A0120/04
=
=
=
=
1
1
1
1
x
x
x
x
VS0001
VS0001
VS0001
VS0001
+
+
+
+
DX0928/110V/Red
DX0928/110V/Green
DX0928/250V/Red
DX0928/250V/Green
Fuseholder and Neon:
41
42
43
44
=
=
=
=
1
1
1
1
x
x
x
x
FX0359
FX0359
FX0359
FX0359
+
+
+
+
DX0928/110V/Red
DX0928/110V/Green
DX0928/250V/Red
DX0928/250V/Green
Fuseholder and Blanking Plate:
45 = 1 x FX0359 + Blanking Plate
B2 = 1 x VS0001+ Blanking Plate
Note: For technical details of individual components please see page 74
84
www.bulgin.co.uk
POLYSNAP® POWER INLET MODULES
Sheet F IEC Outlet - Vertical
VERTICAL MODULE ARRANGEMENT
Outlet with 2.8mm or 6.3mm
tags
Shuttered or Non-Shuttered
Single Pole Switch or Neon
Indicator
I/O Marking Options
BZV45/Z0000/02
BZV xx / xxxxx / xx
Type of Outlet
Non Filtered Outlet
Combination of Other Components
Sheet F Power Outlet (non shuttered), 6.3 or
2.8mm tabs:
Z0000 = Non Filtered
Single Pole Switch:
45 = PX0695/63
46 = PX0695/28
Sheet F Power Outlet (shuttered), 6.3 or
2.8mm tabs:
47 = PX0783/63
48 = PX0783/28
01 = S.P. Switch
Single Pole Neon Switch:
02 = S.P. Red Neon Switch
08 = S.P. Green Neon Switch
Neon Indicator:
03 = Red Neon Indicator
Single Pole High Inrush Switch:
46 = S.P. High Inrush Switch
Single Pole Switch Marked I/O:
69 = S.P. Switch (I/O)
Single Pole Neon Switch Marked (I/O):
71 = S.P. Red Neon Switch (I/O)
74 = S.P. Green Neon Switch (I/O)
Single Pole High Inrush Switch Marked (I/O):
98 = S.P. High Inrush Switch (I/O)
Note: For technical details of individual components please see page 74
www.bulgin.co.uk
85
IEC CONNECTORS
How to Order
Panel Thickness: 1.0, 1.5, 2.0, 3.0mm.