Index
ALUMINUM PAGE
SHEET
FLAT . . . . . . . . . . . . . . . . . . . . . . 2, 3
PAINTED . . . . . . . . . . . . . . . . . . . . . 3
EMBOSSED . . . . . . . . . . . . . . . . . . 3
PERFORATED . . . . . . . . . . . . . . . . 3
EXPANDED METAL . . . . . . . . . . . 29
PLATE . . . . . . . . . . . . . . . . . . . . . . . 2, 3
TREAD PLATE . . . . . . . . . . . . . . . . . . 3
ROD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
BAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SHAPES
BEAMS . . . . . . . . . . . . . . . . . . . . . . 4
ANGLES . . . . . . . . . . . . . . . . . . . . . 5
CHANNELS . . . . . . . . . . . . . . . . . . 5
TEES . . . . . . . . . . . . . . . . . . . . . . . . 8
ZEES . . . . . . . . . . . . . . . . . . . . . . . . 8
MARINE . . . . . . . . . . . . . . . . . . . 8, 9
PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
HALF PIPE . . . . . . . . . . . . . . . . . . . . . 6
HOLOBAR . . . . . . . . . . . . . . . . . . . . . 6
TUBING . . . . . . . . . . . . . . . . . . . . . . . . 7
STAIR TREAD . . . . . . . . . . . . . . . . . . 9
GRATING . . . . . . . . . . . . . . . . . . . . . . 9
FITTINGS . . . . . . . . . . . . . . . . . . . . . 27
WELD WIRE . . . . . . . . . . . . . . . . . . . 27
HINGES . . . . . . . . . . . . . . . . . . . . . . . 28
BRASS
SHEET . . . . . . . . . . . . . . . . . . . . . .
PLATE . . . . . . . . . . . . . . . . . . . . . .
ROD . . . . . . . . . . . . . . . . . . . . . . . .
BAR . . . . . . . . . . . . . . . . . . . . . . . .
BUSHING (SAE 660) . . . . . . . . . .
FITTINGS . . . . . . . . . . . . . . . . . . .
SHIM STOCK . . . . . . . . . . . . . . . .
COPPER
10
10
11
11
13
27
27
SHEET. . . . . . . . . . . . . . . . . . . . . . . 12
BAR. . . . . . . . . . . . . . . . . . . . . . . . 12
PLATE. . . . . . . . . . . . . . . . . . . . . . . 12
STAINLESS
SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ROD . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 16
BAR. . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 17
ANGLES. . . . . . . . . . . . . . . . . . . . . . . 17, 19
SHAFTING
BOAT . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PUMP. . . . . . . . . . . . . . . . . . . . . . . . . . 16
CHROME ROD. . . . . . . . . . . . . . . . . . 16
BEAMS . . . . . . . . . . . . . . . . . . . . . . . . 19, 20
CHANNELS . . . . . . . . . . . . . . . . . . . . 21, 22
PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
TUBING. . . . . . . . . . . . . . . . . . . . . . . . . . 18
STRUCTURAL TUBING . . . . . . . . . . . . 18
EXPANDED METAL . . . . . . . . . . . . . . . 29
FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . 27
WELD WIRE . . . . . . . . . . . . . . . . . . . . . . 27
HINGES. . . . . . . . . . . . . . . . . . . . . . . . . . 28
LATCHES . . . . . . . . . . . . . . . . . . . . . . . . 28
ACCESSORIES
BI-METALLIC . . . . . . . . . . . . . . . . . . . . . . 10
BURSTING PRESSURE, SEAMLESS STAINLESS PIPE . . . . . . . . . . . . . . . . . . . . 23
MARINE FITTINGS . . . . . . . . . . . . . . . . . . 24
CAST IRON . . . . . . . . . . . . . . . . . . . . . . . . . 24
DIMENSION, SEAMLESS WELD. FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . 25
DIMENSION, FORGED FLANGES . . . . . 26
FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . 27
WELD WIRE . . . . . . . . . . . . . . . . . . . . . . . . 27
ANODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
HINGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
LATCHES . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
EXPANDED METAL . . . . . . . . . . . . . . . . . 29
GALVANIC CORROSION . . . . . . . . . . . . . 30
CREDIT APPLICATION. . . . . . . . . . . . 31, 32
ALUMINUM & STAINLESS, INC.
ALUMINUM FLAT SHEET
ALUMINUM PLATE
Mill Finish • 1/2 Hard
Mill Finish
3003 - H14
Thickness Width and Length Est Wt.
Lbs. per
Sheet
.025” .3564 Lb. Sq. Ft.
48 x 120
14
.032” .4562 Lb. Sq. Ft.
48 x 120
18
.040” .5702 Lb. Sq. Ft.
48 x 120
23
.050” .7128 Lb. Sq. Ft.
48 x 120
29
.063” .8981 Lb. Sq. Ft.
48 x 120
36
.080” 1.1405 Lb. Sq. Ft.
48 x 120
46
1/8”-(.125”) 48 x 120
71
1.782 Lb. Sq. Ft. 5052 - H32
Thickness 112
3.492 Lb.Sq.Ft. 48 x 144 168
48 x 240 279
60 x 240 349
72 x 240 419
96 x 240
559
Thickness 251
ALUMINUM SHEET
5083, 5086, & 5456 - H116
ABS Certified Available
Mill Finish
1/8”-(.125”) 48 x
96
55
28
35
42
1.728 Lb.Sq.Ft. 48 x 144
83
48 x 240
138
.080”
48 x 120
1.117 Lb. Sq. Ft. 48 x 144 45
54
60 x 240
173
72 x 240
207
84 x 240
242
96 x 240
276
48 x
.090”
48
1.257 Lb. Sq. Ft. 48
48
48
60
60
x
x
x
x
x
x
96 120 144 240 144 240 40
50
60
101
75
126
.100” 48
1.397 Lb. Sq. Ft. 48
48
48
60
60
60
x
x
x
x
x
x
x
96
120
144 240 96
144 240 45
56
67
112
56
84
140
3/16” -(.190”) 1/8”-(.125”)
48
1.746 Lb. Sq. Ft. 48
48
48
60
60
60
72
72
x
x
x
x
x
x
x
x
x
96 120 144 240 96
144 240 144
240 3/16”-(.190”) x
x
x
x
x
x
x
x
96 144 240 96
144 240
144
240
96
84
2.627 Lb. Sq. Ft. 48 x 144
126
48 x 240 210
60 x
96
105
56
70
84
140
70
105
175
126
210
60 x 144 158
60 x 240 263
72 x 240 315
84 x 240
368
96 x 240
420
85
127
212
106
159
265
191
318
108 x 240
473
120 x 240
525
–
2–
Est Wt.
Lbs. per
Sheet
48 x
3.456 Lb. Sq. Ft. 48 x
48 x
60 x
72 x
84 x
96 x
108 x
120 x
96
144
240 240 240 240 240 240 240 111
166
276
346
415
484
553
622
691
5/16”-(.313”) x
x
x
x
x
x
x
240 240 240 240 240 240 240 346
433
519
606
692
779
865
48 x
5.184 Lb. Sq. Ft. 48 x
60 x
72 x
84 x
96 x
108 x
120 x
96
240 240 240 240 240 240 240 166
415
518
622
726
829
933
1037
1/2”-(-.500”) x
x
x
x
x
x
x
240 240 240 240 240 240 240 553
691
829
968
1106
1244
1382
48 x
8.640 Lb. Sq. Ft. 60 x
72 x
84 x
96 x
108 x
120 x
240
240 240 240 240 240 240 691
864
1037
1210
1382
1555
1728
48 x 240 10.368 Lb. Sq. Ft. 60 x 240 72 x 240 96 x 240 829
1037
1244
1659
1”-(1.00”) 13.824 Lb. Sq. Ft. 240 240 240 240 1106
1382
1659
2212
11/4”-(1.25”) 60 x 240 17.280 Lb. Sq. Ft. 72 x 240 96 x 240 1728
2074
2765
11/2”-(1.50”) 84 x 240 20.736 Lb. Sq. Ft. 96 x 240 2903
3318
2”-(2.00”) 48 x 240 27.648 Lb. Sq. Ft. 60 x 240 2212
2765
3/8”-(.375”) 48 x 144
Width and Length 1/4”-(.250”) 168
.063”
48 x 96 .880 Lb. Sq. Ft. 48 x 120 48 x 144 48
2.654 Lb. Sq. Ft. 48
48
60
60
60
72
72
ABS Certified Available
Mill Finish
3/8”-(.375”)48 x 96 Mill Finish • 1/2 Hard
Est Wt.
Lbs. per
Sheet
5083, 5086, & 5456 - H116
4.327 Lb. Sq. Ft. 5052 - H32
Width and Length Est Wt.
Lbs. per
Sheet
1/4”-(.250”) 48 x 96 ALUMINUM FLAT SHEET
Thickness Width and Length ALUMINUM PLATE
6.912 Lb. Sq. Ft. 48
60
72
84
96
108
120
48
60
72
84
96
108
120
5/8”-(.625”) 3/4”-(.750”) 48
60
72
96
x
x
x
x
Lafayette
New Orleans
800-252-9074
800-535-9156
ALUMINUM PLATE
METRIC SIZES
5083
ABS Certified
Mill Finish
Federal Specification QQA-250/7
Thickness 3mm-(.118”) 4mm-(.158”) 5mm-(.196”) Width and Length 84 x 288 84 x 288 84 x 288 DIAMOND TREAD
5-BAR TREAD
Est Wt.
Lbs. per
Sheet
274
367
455
ALUMINUM FLAT SHEET
6061-T6 Sheet-Mill Finish
Thickness
1/8”-(.125”) 1.80 Lb. Ft.2
Width
48 Lgth
144 Wt/Sht
85
3/16”-(.190”) 48 144 129
2.74 Lb. Ft.2
Thickness Width & Lgth ALUMINUM PLATE
6061-T651 Plate-Mill Finish
48.5” x 144.5” OR CUT TO SPECS
Thickness
1/4” 3/8” 1/2” 5/8”
3/4” 1” 11/4”
11/2”
2”
21/4”
21/2”
3”
31/2”
4”
5”
6”
ALLOY 5052, 5086
Wt. Per
Sq. Ft.
Est. Wt.
Each
3.53
5.29
7.06
8.82
10.58 14.11
17.64
21.17
28.22
31.75
35.28
42.34
49.39
56.45
70.56
84.67
177
264
351
437
526
700
872
1044
1393
1564
1743
2086
2438
2792
3479
4165
.063”
.100”
.125”
.188” .250” .313” .375” 48
48
48
60
48
48
48
60
60
48
48
48
60
60
48
48
48
60
60
48
60
60
60
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Approx.
Wt. Each
120
96
192 192
96
192 240 192 240 96
192 240 192 240 96
192 240 192 240 240 420 192 240 40
49
99
123
60
120
150
150
188
88
177
221
221
276
117
235
294
294
367
347
434
434
543
*Thicker Material Available
Width
48
Lgth
120
Color
WHITE
Thickness
Other Colors Available
52 086 052
5
5
50
•
• • •
• • • •
• •
• • •
• •
• •
• •
• •
• •
• • •
•
•
• •
• •
•
•
•
•
•
ALUMINUM PERFORATED
STUCCO EMBOSSED
COILS
Stucco Pattern
ALUMINUM PAINTED SHEET
Thickness
.040 03
30
r
Ba
5-
.020
Width
Lgth
Wt/Sht
48
50 ft.
50 lbs
ALUMINUM PERFORATED SHEET
.050 48
120
ALUMINUM SHEET
STUCCO EMBOSSED
3/16 Holes on 1/4” Centers Staggered 29 lbs. each
Thickness
.032 –
3–
Width
Lgth
Wt/Sht
48 120
18
ALUMINUM & STAINLESS, INC.
ALUMINUM BAR
ALUMINUM ROD
ROUND
Standard 20-Foot Lengths
3” Dia. & Up 12-Foot Lengths
Alloy 5086 • 6061 • 6063
Wt.
Size Per Ft.
3/16 .032
* 1/4 .058
5/16 .090
* 3/8 .130
* 1/2 .231
* 5/8 .361
* 3/4 .520
7/8 .707
* 1 .924
11/8 1.169
* 11/4 1.443
13/8
1.746
* 11/2 2.078
15/8
2.439
13/4 2.829
17/8
3.247
* 2
3.695
21/4 4.676
21/2 5.773
* 3 8.313
* 31/2 11.314
* 4 14.778
41/4
16.683
* 41/2 18.703
43/4 20.839
5
23.091
51/2 27.940
6 33.251
61/2 39.023
7 45.258
8 59.112
9 74.814
10 92.363
11 111.759
12 133.002
13 156.093
14 181.031
15 207.816
*5086 Available
RECTANGULAR - SQUARE EDGE
Standard 20-Foot Lengths
Alloy 5086 • 6061
Size * 1/8 x
* 1/8 x
1/8 x
** 1/8 x
** 1/8 x
1/8 x
1/8 x
** 3/16 x
** 3/16 x
** 3/16 x
** 3/16 x
** 3/16 x
** 3/16 x
** 3/16 x
3/16 x
* 1/4 x
** 1/4 x
1/4 x
** 1/4 x
** 1/4 x
** 1/4 x
** 1/4 x
** 1/4 x
1/4 x
** 1/4 x
* 1/4 x
* 3/8 x
** 3/8 x
* 3/8 x
** 3/8 x
** 3/8 x
** 3/8 x
** 3/8 x
** 3/8 x
** 3/8 x
** 3/8 x
3/8 x
Size 1/2 5/8 3/4 1
11/4 11/2
2
3
Wt.
Per Ft.
.294
.459
.662
1.176
1.838
2.646
4.704
10.584
1/2
3/4
Size .074
.110
.147
.221
.294
.441
.588
.221
.276
.331
.441
.551
.662
.882
1.103
.221
.294
.368
.441
.588
.735
.882
1.176
1.470
1.764
2.352
.331
.441
.551
.662
.882
1.103
1.323
1.764
2.205
2.646
3.528
1
11/2
2
3
4
1
11/4
11/2
2
21/2
3
4
5
3/4
1
11/4
11/2
2
21/2
3
4
5
6
8
3/4
1
11/4
11/2
2
21/2
3
4
5
6
8
1/2
1/2
** 1/2
1/2
** 1/2
** 1/2
1/2
** 1/2
* 1/2
* 1/2
* 3/4
* 3/4
3/4
** 3/4
3/4
3/4
3/4
* 3/4
* 3/4
* 1
1
1
1
1
1
1
1
1
*11/4
*11/4
* 11/2
* 11/2
* 11/2
* 11/2
* 2
* 3
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1
11/2
2
21/2
3
4
5
6
8
10
1
11/2
2
3
4
5
6
10
12
2
3
4
5
6
7
8
10
12
2
6
2
3
6
10
4
6
Wt.
Per Ft.
.588
.882
1.176
1.470
1.764
2.352
2.940
3.528
4.704
5.880
.882
1.323
1.764
2.646
3.528
4.410
5.292
8.820
10.584
2.352
3.528
4.704
5.880
7.056
8.232
9.408
11.760
14.112
2.940
8.820
3.528
5.292
10.584
17.640
9.408
21.168
*12 Foot Lengths
** Stocked in 5086
AMERICAN STANDARD ALUMINUM I-BEAMS
ALUMINUM BAR
SQUARE
Standard 12 Foot Lengths
Alloy 6061 T6
Wt.
Per Ft.
t
B
A
A
*2
*3
4
4
5
6
8
WIDE FLANGE BEAM
4
6
–
Standard 25 Foot Lengths
Alloy 6061
*5086 Available
Size Inches
B
t
.875
.188
2.330
.170
2.660
.190
2.000
.250
3.000
.210
3.330
.230
4.000
.270
4
6
4–
.313
.240
Wt.
Per Ft.
.780
1.964
2.646
2.220
3.434
4.304
6.350
4.760
5.399
Lafayette
New Orleans
800-252-9074
800-535-9156
ALUMINUM STANDARD STRUCTURAL SHAPES
t
B
ANGLES
A
Size Inches
B
A
1/2
3/4
1/2
3/4
1
1
1
11/4
11/4
11/4
11/2
11/2
11/2
2
2
2
2
21/2
21/2
21/2
3
3
3
3
4
4
4
5
5
6
6
1
1
1
11/4
11/4
11/4
11/2
11/2
11/2
2
2
2
2
21/2
21/2
21/2
3
3
3
3
4
4
4
5
5
6
6
t
t
1/8
1/8
1/8
3/16
1/4
1/8
3/16
1/4
1/8
3/16
1/4
1/8
3/16
1/4
3/8
3/16
1/4
3/8
3/16
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
3/8
1/2
Alloy 5086 - 6061
25 Foot Lengths
Wt.
Per Ft.
.131
.201
.275
.400
.514
.343
.510
.656
.432
.619
.809
.577
.850
1.110
1.606
1.070
1.404
2.047
1.275
1.684
2.474
3.227
2.283
3.366
4.414
4.237
5.578
5.119
6.754
A
1
2
2
2
2
3/4
1
11/2
11/2
11/2
21/2
2
3
1
3
2
3
2
3
2
3
21/2
4
2
4
2
4
3
4
3
5
3
5
3
6
2
6
3
6
4
6
4
6
4
8
6
9
3
Size Inches
B
CHANNELS
B
A
Size Inches
B
1
11/4
11/2
2
2
2
2
21/4
4
1
11/4
11/2
1
11/2
2
2
2
11/2
3/4
3/4
t
1/8
1/8
1/8
3/16
1/8
3/16
3/16
1/4
1/4
1/8
Wt.
Per Ft.
t
1/8
1/8
1/8
3/16
.239
1/4
1/4
3/16
3/16
1/4
3/8
1/4
3/16
1/4
1/4
3/8
1/4
3/8
3/16
1/4
1/4
3/8
1/2
3/4
1/4
.956
.431
.496
.731
1.257
.840
1.071
1.403
2.046
1.537
1.280
1.680
1.988
2.926
2.329
3.349
1.760
2.600
3.160
4.237
5.578
11.679
3.500
CHANNELS
SQUARE CORNERS
Alloy 6061 - 6063
25 Foot Lengths
A
UNEQUAL ANGLES
Alloy 5086 - 6061
25 Foot Lengths
SQUARE CORNERS
Alloy 6061 - 6063
25 Foot Lengths
Wt.
Per Ft.
.300
.413
.530
.910
.563
1.040
1.260
1.660
1.691
.992
* SPECIAL CHANNELS
FOR
MARSH BUGGIE CLEATS
Call us for Price & Delivery
–
5–
A
A
t
B
3
3
3
4
4
4
5
5
6
6
6
8
8
*8
*8
10
10
12
Size Inches
B
1.41
1.49
1.596
1.58
1.647
1.720
1.750
2.032
1.945
2.034
2.157
2.290
2.527
3.000
3.750
2.600
2.886
2.960
t
.170
.258
.356
.180
.247
.320
.190
.472
.225
.314
.437
.250
.487
.375
.250
.240
.526
.300
Wt.
Per Ft.
* SPECIAL SQUARE CORNERS
1.435
1.729
2.074
1.846
2.161
2.504
2.316
3.975
3.002
3.631
4.498
4.252
6.484
6.600
5.780
5.278
8.641
7.411
ALUMINUM & STAINLESS, INC.
ALUMINUM PIPE
SCHEDULE 40
I.P.S
Inches
1/4 3/8 * 1/2 * 3/4 * 1 * 11/4 * 11/2 * 2 Actual
O.D.
I.D.
Inches
Inches
.540 .364
.675 .493
.840 .622
1.050 .824
1.315 1.049
1.660 1.380
1.900 1.610
2.375 2.067
Wall
Thickness
Inches
.088 .091 .109 .113 .133 .140 .145 .154 Alloys: 6063 - 6061 - 5086
Standard 20 Foot Lengths
I.P.S
Inches
21/2 * 3
* 31/2 * 4
5 * 6
* 8
10 12 *Available in 5086
Wt. Lbs.
Per Foot
.147
.196
.294
.391
.581
.786
.940
1.260
Actual
O.D.
I.D.
Inches
Inches
2.875 2.469
3.500 3.068
4.000 3.548
4.500 4.026
5.563 5.047
6.625 6.065
8.625 7.981
10.750 10.020
12.750 12.000
Wall
Thickness
Inches
.203 .216 .226 .237 .258 .280 .322 .365 .375 Wt. Lbs.
Per Foot
2.004
2.621
3.151
3.733
5.057
6.564
9.878
14.000
17.150
Actual
O.D.
I.D.
Inches
Inches
4.000 3.364
4.500
3.826
5.563
4.813
6.625
5.761
8.625
7.625
10.750
9.562
12.750
11.374
Wall
Thickness
Inches
.318 .337
.375
.432
.500
.593
.687
Wt. Lbs.
Per Foot
4.326
5.183
7.188
9.884
15.010
22.290
30.660
SCHEDULE 80
I.P.S
Inches
1/2
* 3/4
* 1
*11/4
*11/2
* 2
*21/2
* 3
Actual
O.D.
I.D.
Inches
Inches
.840
.546
1.050
.742
1.315
.957
1.660
1.278
1.900
1.500
2.375
1.939
2.875
2.323
3.500
2.900
Wall
Thickness
Inches
.147
.154
.179
.191
.200
.218
.276
.300
Alloys: 6063 - 6061 - 5086
Standard 20 Foot Lengths
I.P.S
Inches
* 31/2 * 4
5
* 6
8
10
12
Wt. Lbs.
Per Foot
.376
.510
.751
1.037
1.256
1.737
2.650
3.547
*Available in 5086
ALUMINUM HALF PIPE
Alloy 6061 - 5086
20’ Lengths
Sch. 40
11/2” x 20 ft.
2” x 20 ft.
21/2” x 20 ft.
3” x 20 ft.
Sch. 80
2” x 20 ft.
6” x 20 ft.
Wt.
Per Length
10
13
24
26
16.3
100
Special
4” OD x 1/4” Wall
4” OD x 1/2” Wall
41/4” OD x 3/8” Wall
34
63
54
ALUMINUM HOLOBAR
Alloy 6061T6
O.D.
I.D.
Inches
Inches
3/4
11/4
5/8
11/2
11/2
3/4
2
1
21/4
11/2
21/4
13/4
21/2
1
21/2
11/2
Wall
Thickness
Inches
1/4
7/16
3/8
1/2
3/8
1/4
3/4
1/2
Weight
Lbs.
Per Foot
0.952
1.754
1.606
2.884
2.598
1.923
4.841
3.845
–
6–
O.D.
Inches
21/2
3
31/2
31/2
4
4
4
4
41/2
41/2
41/2
41/2
5
5
51/2
51/2
51/2
6
6
6
6
61/2
61/2
7
71/2
71/2
8
8
81/2
9
9
9
10
12
12
I.D.
Inches
13/4
2
2
21/2
2
21/2
3
31/4
21/2
3
31/2
33/4
3
31/2
31/2
4
41/2
4
41/2
5
51/4
5
41/2
5
51/2
61/2
6
7
61/2
7
6
5
8
111/4
10
Wall
Thickness
Inches
3/8
1/2
3/4
1/2
1
3/4
1/2
3/8
1
3/4
1/2
3/8
1
3/4
1
3/4
1/2
1
3/4
1/2
3/8
3/4
1
1
1
1/2
1
1/2
1
1
11/2
2
1
3/8
1
Weight
Lbs.
Per Foot
2.944
4.618
7.853
5.711
11.080
9.006
6.663
5.022
12.930
10.710
7.615
5.715
14.780
12.140
16.630
13.560
9.519
19.040
14.990
10.160
7.793
15.930
20.320
22.170
24.010
12.930
26.650
13.860
27.710
29.560
42.413
51.720
33.250
16.434
40.640
Holobar
Cont’d
Lafayette
New Orleans
800-252-9074
800-535-9156
A
EXTRUDED SQUARE TUBE
SQUARE & RADIUS CORNERS
t
EXTRUDED
RECTANGULAR TUBE
t
SQUARE CORNERS
B
Alloy & Temper: 6003 T5 & 6061 T6
Alloy and Temper 6063-T5 & 6061-T6
A
1
1
11/4
11/4
11/2
11/2
2
2
2
21/2
3
3
3
4
4
A
Size Inches
t
1/8
1/8
1/2
3/4
1/16
1/8
.095 1/8
1/8
3/16
1/8
3/16
1/4
1/4
1/8
3/16
1/4
1/8
1/4
Available
Lengths
21’1”
21’1”
25’
21’1”
21’
21’1”
21’1”
24’
21’1”
Corner*
S
S
R
S
R
S
S
R
S,R
Wt.
Per Ft.
.292
.368
.286
.515
.516
.662
.809
1.161
1.103
21’1”, 24’
21’1”, 24’
24’
21’1”
24’
24’
24’
24’
R
S,R
S
S
R
S,R
S
S,R
1.602
2.058
2.646
1.691
2.487
3.234
2.279
4.410
*S = Square Corner
A
3/4
1
1
1
1
1
1
11/2
11/2
13/4
2
2
2
2
2
3
3
4
8
Size Inches
B
t
11/2
1/8
1/8
11/2
2
.094
2
1/8
3
1/8
4
1/8
4
3/16
2
1/8
3
1/8
3
1/8
3
1/8
3
1/4
4
1/8
4
1/4
5
1/8
4
1/4
6
1/4
6
1/4
6
3/8
Available
Length Corner*
24’
S
21’1”
S
20’
S
21’1”
S
21’1”
S,R
21’1”
S
25’
R
21’1”
S
21’1”
S
25’
S
21’1”
S
24’, 25’
S
21’1”
S
24’
S
21’1”
S
24’
S,R
24’
R
24’
S
28’
S
Wt.
Per Length
.588
.662
.620
.809
1.103
1.423
1.997
.956
1.250
1.323
1.396
2.646
1.690
3.234
1.984
3.833
4.998
5.586
13.850
*S = Square Corner
R = Radius Corner
R = Radius Corner
ALUMINUM HANDRAIL
OVAL
ALUMINUM TUBING
Alloy 6061, 20’ Lengths
B
ALLOY 6063, 20’ Lengths
13/8 OD x .062 Wall
.288 Lbs/Ft
A
We Stock Extensive Inventories
of Both Aluminum & Stainless
Fittings, Such As:
Flanges
Elbows
Tees
Couplings
Nipples
Bushings/Reducers
Caps
Unions
A
2.562
Size Inches
B
1.562
t
t
.125
Wt.
Per Length
20.0
.090 EDGE RAIL
6063 T6
16’ Lengths
.54 LBS/FT
Closes to 1.05” Diameter
Fits .090 Plate Edge
30º
–
7–
ALUMINUM & STAINLESS, INC.
A
1.750
TEE BARS
B
25 Foot Lengths
5086 & 6061
1.750
A
1
11/2
2
2
2
2
2
2
2
2
2
2
2
21/2
21/2
21/2
21/2
21/2
21/2
4
Smooth or Ribbed
6063 Alloy | 20’
B
3.250 R.
E
C
25’ Lengths
6061 T6
D
A
SYM
t
GUNNEL SECTION
KEEL
CAP
Size Inches
B
t
2
3/16
3
3/16
1
3/16
2
1/4
2
3/8
3
1/4
3/16
33/4
4
1/4
5
1/4
5
3/8
6
1/4
6
3/8
8
1/4
21/2
5/16
9
5/16
11
1/4
11
5/16
11
3/8
12
1/2
3
3/8
.250 TYPICAL WALL
1.162 lbs/ft
Wt. Lbs.
Per Ft.
.622
.951
.624
1.103
1.650
1.397
1.229
1.690
1.984
2.920
2.279
3.362
2.867
1.950
4.120
3.920
4.846
5.788
8.320
2.922
T
A
B
C
2.188 1.687 .750
D
.188
T
.125
PLATE CAP
HATCH SECTION
5086
6061 T6
T
A
B
C
A
B
A
E
30˚
2.00
2.25
.260
.327
C
Wt.
Per
Foot
.250
.250
.649 Lbs
.834 Lbs
ZEES
6061 T6 | 25’ Lengths
B
B
SP 8539
t
A
t
B
BULB TEE
A
5086 & 6061
25’ Lengths
A
t
A
31/4
B
C
A
2
3
3
3
3
3
t
3/16
3/16
1/4
3/16
1/8
1/4
Wt. Lbs
Per Ft.
.680
1.115
1.354
1.230
.846
1.510
J SECTION
t
C
B
A
A
B
21/2
11/2
HAT
SECTION
6061 T6
25’ Lengths
C
1/8 Wt./
Lengths
16 Lbs
A
C
B
A
B
Wt.
Per Ft.
6.2 Lbs
t
1/2
6061 T6 | 25’ Lengths
SP 9518
Size Inches
B
C
1
1/2
11/2
1/2
11/2
1/2
13/4
3/4
2
1
2
1/2
Size Inches
B
5
Size Inches
A
B
1.656
1.500
1.375
1.500
.938
1.875
25 Foot Lengths
–
8–
Wt.
Per Ft. DIE#
1.14 SP7540
1.14 SP7541
MOULDING
SP 7535
DIE #
SP 8539
SP 9518
SP 7535
A
3
17/8
Size Inches
B
C
t
11/2
1
3/16
13/4
3/4
1/4
6063 Alloy
Wt. Lbs
Per Length
33
30
18
.380
.625
.125
.188
BON - 185
12 Foot Lengths
Lafayette
New Orleans
800-252-9074
800-535-9156
MARINE SPECIALTY EXTRUSIONS
RUB RAIL
.250
SPRAY RAIL
A
2.345
2.615
4.500
2.000
TO P.I.
.625
Wght.
per Ft.
.971 Lbs
1.810 Lbs
3.584 Lbs
B
4.062
3.600
7.750
1.545
.789
.250r
.094r
6º30”
16º30”
5.000
2.000
A
4.000
B
25 Foot Lengths - 42 Lbs Ea.
1.68 Lbs. per Foot
.188
.312
STAIR TREAD
1.875
.156 X 45º
4.156
RUB RAIL - 5086 - 4.55 lbs/ft
SEAT BASES
6061 T6
25 Foot Lengths
.188
2.75
B
4.00
A
2.625
1.00
.812
Size Inches
A
11/2
4
6
9
B
1
13/4
13/4
13/4
Wt. Lbs
Per Ft.
.372
1.360
1.760
2.568
.875
4.00
1.250
SP9844
Wght. per Ft. 2.049 Lbs
SP9631
Wght. per Ft. .875 Lbs
ALUMINUM RECTAGULAR
BAR GRATING
GRIP STRUT GRATING
Aluminum Alloy 5052 - H32
Bar Size
Inches
1/8 x 1
3/16 x 1
3/16 x 1
3/16 x 11/4
Grating Size
Feet
Wght. per
Sq.Ft.
2’ x 24’
2’ x 24’
3’ x 24’
3’ x 24’
1.9 Lbs
2.7 Lbs
2.7 Lbs
3.2 Lbs
BAR SPACING
C.B.
12 Foot Lengths
Type No.
Size
Depth
420A
91/2”
2”
420A
113/4”
2”
4”
Wght.
per Ft.
1.37 Lbs
1.59 Lbs
Plain and Serrated
ALLOY 6063 - T6
Call Us For -
Price and Delivery on Fiberglass & Stainless Grating
–
9–
13/16”
C/C B.B.
ALUMINUM & STAINLESS, INC.
NAVAL BRASS SHEET AND PLATE
HOT ROLLED
Inches
1/8” (.125)
3/16” (.188)
Size
Inches
48 x 120
Wt. Per
Square Foot (lbs.)
5.47
48 x 120
8.2
1/4” (.250)
48 x 120
10.9
5/16” (.313) 48 x 120
60 x 120
13.7
3/8” (.375)
48 x 120 60 x 120
16.4
1/2” (.500)
48 x 120 60 x 120
21.9
5/8” (.625)
48 x 120 60 x 120
27.4
CDA 464
Inches
3/4” .(750)
1” (1.000)
11/4”(1.250)
11/2”(1.500)
2” (2.000)
Size
Inches
48 x 120
60 x 120
Wt. Per
Square Foot (lbs.)
32.8
48 x 120
60 x 120
43.8
48 x 120
60 x 120
54.7
48 x 120
60 x 120
65.7
48 x 120
60 x 120
87.6
BI-METALLIC
Aluminum
Plate
Transition
Joint
Composite inserts that make it possible
to permanently Join dissimilar metals
(aluminum / steel) by standard welding
techniques.
T
Also known as detacouple or tri-clad,
this material consists of 5000 Series
Marine Aluminum & SA 516-55 Low
Carbon Manganese Steel, separated by
a layer of 1100 Alloy Aluminum.
W
Approved worldwide; U.S. Military Spec
MIL-J-2445.
Steel
Plate
3/4” Thick
13/8” Thick
Stock Plate Sizes
48 x 144
48 x 144
20.60 Lbs per Ft2
39.41 Lbs per Ft2
Water Jet Cut to Desired Width
ALUMINUM / STEEL TRANSITION MATERIAL
Call for Price and Delivery on Brass Fittings
–
10 –
Lafayette
New Orleans
800-252-9074
800-535-9156
BRASS ROUND ROD
In Standard Mill Lengths - 12 Foot Random
464 Naval & CDA 360 Free-Cutting
Size
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
11/8
11/4
13/8
11/2
15/8
13/4
Wt./Ft.
.045
.102
.181
.283
.407
.554
.723
.915
1.130
1.630
2.220
2.890
3.660
4.520
5.470
6.510
7.640
8.860
Size
17/8
2
21/4
23/8
21/2
25/8
23/4
3
31/4
31/2
33/4
4
41/4
41/2
43/4
5
51/2
6
8
Wt./Ft.
10.20
11.60
14.60
16.30
18.10
19.90
21.90
26.00
30.60
35.40
40.70
46.30
52.30
58.60
65.30
72.30
87.50
104.00
195.50
FREE-CUTTING BRASS BAR
Square
In Standard Mill Lengths - 12 Foot Random
CDA 360
ASTM B16
Size
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
Wt./Ft.
.057
.130
.230
.360
.518
.705
.921
1.170
1.440
2.070
Size
7/8
1
11/8
11/4
13/8
11/2
13/4
2
21/2
3
Wt./Ft.
2.82
3.68
4.66
5.76
6.97
8.29
11.30
14.70
23.00
33.20
FREE-CUTTING BRASS BAR
Hexagonal
In Standard Mill Lengths - 12 Foot Random
CDA 360
ASTM B16
Size
3/16
1/4
5/16
3/8
1/2
5/8
Wt./Ft.
.112
.199
.312
.449
.798
1.250
Size
3/4
1
11/4
13/8
11/2
2
FREE-CUTTING BRASS BAR
Rectangular-Drawn-Half Hard Temper
Price on Request
–
11 –
Wt./Ft.
1.80
3.19
4.99
6.03
7.18
12.80
ALUMINUM & STAINLESS, INC.
FLAT COPPER SHEET
ASTM B152 COLD ROLLED
Wt./Ft.2
16 oz. 20 oz. 24 oz. 32 oz. 48 oz. 96 oz. Thickness
.0216 .0270 .0323 .0431 .0647 .1250 CDA 119
Size Inches
36 x 120 36 x 120 36 x 120 36 x 96 36 x 96 36 x 96 Wt./Sht.
30
37.5
45
48
75
144
COPPER PLATE
Thickness
1/4 ”
3/8 ”
Weight
11.6 Lbs per Ft.2
17.4 Lbs per Ft.2
COPPER BUS BAR
Rectangular - Square Corner
12 Foot Lengths
Size Inches
Wt.
Per Ft.
Size Inches
1/8 x 11/2
.726
1/4 x 5
4.84
3/16 x 1
.727
1/4 x 6
5.81
1/4 x 1/2
.484
3/8 x 2
2.90
1/4 x 3/4
.727
1/2 x 2
3.88
1/4 x 1
.969
1/2 x 3
5.81
1/4 x 11/2
1.45
1/2 x 4
7.75
1/4 x 2
1.94
1/2 x 5
9.69
1/4 x 3
2.91
1/2 x 6
11.62
1/4 x 4
3.88
3/4 x 1
2.91
–
12 –
Wt.
Per Ft.
CONTINUOUS CAST SAE 660 BEARING BRONZE
105” Bars cut to customer length requirements.
Stock sizes are nominal. Material purchased from this stock will machine cleanly to the sizes listed.
Actual sizes provide allowances for cleanup, as follows:
Outside Diameters to 4”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/32” finish, OD and ID
Outside Diameters 4” to 5” incl.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/32” finish, OD and ID
Outside Diameters over 5”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/32” finish, OD and ID
I.D.
O.D.
1/2
x
3/4
x
1
x
11/4
x
11/2
x
3/4
7/8
WT. PER
IN.
LBS../
105”
1
11/8
11/4
13/8
11/2
13/4
2
.11
.16
.22
.30
.37
.46
.55
.76
1.04
11.55
16.80
23.10
31.50
38.85
48.30
57.75
79.80
109.20
1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
21/8
.14
.21
.30
.40
.49
.58
.70
.81
.93
1.21
1.51
1.90
1.08
14.70
22.05
31.50
42.00
51.45
60.90
73.50
85.05
97.65
127.05
158.55
199.50
113.40
11/4
13/8
11/2
15/8
13/4
17/8
2
21/8
21/4
23/8
21/2
23/4
3
31/4
31/2
4
.19
.27
.37
.48
.58
.70
.82
.97
1.12
1.27
1.40
1.76
2.14
2.54
2.92
4.04
19.95
28.35
38.85
50.40
60.90
73.50
86.10
101.85
117.60
133.35
147.00
184.80
224.70
266.70
306.60
424.20
11/2
15/8
13/4
17/8
2
21/8
21/4
23/8
21/2
25/8
23/4
27/8
3
31/4
31/2
4
.23
.33
.44
.57
.68
.83
.97
1.14
1.27
1.47
1.65
1.82
2.04
2.41
2.85
3.93
24.15
34.65
46.20
59.85
71.40
87.15
101.85
119.70
133.37
154.35
173.25
191.10
214.20
253.05
299.25
412.65
13/4
17/8
2
21/8
21/4
23/8
21/2
25/8
23/4
3
31/4
31/2
33/4
4
41/2
.27
.39
.51
.66
.80
.95
1.09
1.29
1.48
1.86
2.23
2.71
3.21
3.67
4.84
28.35
40.95
53.55
69.30
84.00
99.05
114.45
135.45
155.40
195.30
234.15
284.55
337.05
385.35
508.20
ID
OD
6 x 10
7 x 81/2
7 x 91/2
7 x 10
7 x 12
Wt. Per
In.
17.23
6.73
11.30
14.03
23.90
I.D.
O.D.
13/4 x 2
21/8
21/4
23/8
21/2
25/8
23/4
27/8
3
31/4
31/2
33/4
4
41/4
WT. PER
IN.
LBS../
105”
.33
.46
.60
.75
.93
1.07
1.23
1.44
1.64
2.06
2.47
2.93
3.59
4.15
34.65
48.30
63.00
78.75
97.65
112.35
129.15
151.20
172.20
216.30
259.35
307.65
376.95
435.75
2
x 21/8
.31
21/4
.54
21/2
.68
25/8
.84
23/4
1.01
27/8
1.21
3
1.38
31/4
1.83
31/2
2.23
33/4
2.88
4
3.33
41/2
4.38
5
5.52
51/2
6.85
6
8.30
32.55
56.70
71.40
88.20
106.05
127.05
144.90
192.15
234.15
302.40
349.65
459.90
579.60
719.25
871.50
21/4 x 21/2
25/8
23/4
27/8
3
31/8
31/4
31/2
33/4
4
41/4
.53
.60
.74
.95
1.13
1.34
1.52
2.02
2.46
3.08
3.62
55.65
63.00
77.70
99.75
118.65
140.70
159.60
212.10
258.30
323.40
380.10
21/2 x 3
.84
31/8
1.01
31/4
1.24
31/2
1.64
33/4
2.17
4
2.81
41/4
3.26
41/2
3.73
43/4
4.67
5
5.11
51/2
6.64
6
8.19
88.20
106.05
130.20
172.20
227.85
295.05
342.30
391.65
490.35
536.55
697.20
859.95
23/4 x 31/4
.86
33/8
1.12
31/2
1.36
33/4
1.79
4
2.41
41/4
3.00
41/2
3.59
43/4
4.14
5
4.57
90.30
117.60
142.80
187.95
253.05
315.00
376.95
434.70
479.85
I.D.
O.D.
WT. PER
IN.
3
x 33/8
.93
31/2
1.01
35/8
1.31
33/4
1.48
4
1.97
41/4
2.56
41/2
3.31
43/4
3.83
5
4.54
51/2
5.98
6
7.45
61/2
9.08
97.65
106.05
137.55
155.40
206.85
268.80
347.55
402.15
476.70
627.90
782.25
953.40
31/4 x 33/4
1.02
4
1.75
41/4
2.18
41/2
2.93
43/4
3.32
5
4.10
51/2
5.26
107.10
183.75
228.90
307.65
348.60
430.50
552.30
31/2 x
4
1.29
41/4
1.83
41/2
2.37
43/4
3.04
5
3.79
51/2
5.15
6
6.65
61/2
8.24
135.45
192.15
248.85
319.20
397.95
540.75
698.25
865.20
33/4 x 41/4
1.45
41/2
2.02
43/4
2.48
5
3.15
51/2
4.71
6
6.22
152.25
212.10
260.40
330.75
494.80
653.10
4
x 41/2
1.47
43/4
2.01
5
2.71
51/4
3.52
51/2
4.18
6
5.75
61/2
7.43
7
9.16
71/2
11.17
8
13.14
154.35
211.05
284.55
369.60
438.90
603.75
780.15
961.80
1,172.85
1,379.70
41/4 x 43/4
1.42
5
2.23
51/4
3.02
51/2
3.69
6
5.18
61/2
6.98
149.10
234.15
317.10
387.45
543.90
732.90
41/2 x
5
1.74
51/2
3.13
6
4.66
61/2
6.29
7
8.10
182.70
328.65
489.30
660.45
850.50
43/4 x
349.65
427.35
601.65
759.15
53/4
6
61/2
7
3.33
4.07
5.73
7.23
CENTRIFUGAL CAST SIZES
ID
OD
71/2 x 81/2
71/2 x 91/2
8 x 91/2
8 x 10
8 x 101/2
Wt. Per
In.
6.07
9.50
6.26
10.87
12.96
LBS../
105”
ID
OD
8 x 11
8 x 12
81/2 x 91/2
9 x 10
9 x 101/2
Wt. Per
In.
16.03
22.50
5.50
6.42
9.12
Call Us For Your Aluminum Bronze Requirements
–
13 –
I.D.
O.D.
WT. PER
IN.
5
x 51/2
2.01
6
3.43
61/2
5.12
7
6.92
71/2
8.79
8
10.88
9
15.07
51/4 x 7
6.20
71/2
8.12
51/2 x 61/2
3.90
7
5.61
71/2
7.48
8
9.52
53/4 x 63/4
3.98
71/2
6.71
8
8.83
81/2
10.89
6
x 63/4
3.14
7
4.10
71/2
5.97
8
8.13
81/2
10.26
9
12.49
61/2 x 71/2
4.40
8
6.59
9
11.01
7
x 8
4.78
9
9.29
8
x 9
5.80
Solid x 1/2
.08
5/8
.12
3/4
.16
7/8
.24
1
.28
11/8
.36
11/4
.45
13/8
.53
11/2
.64
15/8
.72
13/4
.80
17/8
.95
2
1.13
21/8
1.23
21/4
1.38
23/8
1.53
21/2
1.69
25/8
1.83
23/4
1.98
27/8
2.19
3
2.46
31/4
2.83
31/2
3.29
33/4
3.70
4
4.33
41/4
4.91
41/2
5.32
43/4
6.20
5
6.55
51/2
8.05
6
9.65
61/2
11.40
7
13.03
71/2
14.83
8
15.50
9
21.38
10
25.90
ID
OD
9 x 11
9 x 12
91/2 x 101/2
10 x 11
10 x 12
LBS../
105”
211.05
360.15
537.60
726.60
922.95
1,142.40
1,582.35
651.00
852.60
409.50
589.05
785.40
999.60
417.90
704.55
927.15
1,143.45
329.70
430.50
626.85
853.65
1,077.30
1,311.45
462.00
691.95
1,156.05
501.90
975.45
609.00
8.40
12.60
16.80
25.20
29.40
37.80
47.25
55.65
67.20
75.60
84.00
99.75
118.65
129.15
144.90
160.65
177.45
192.15
207.90
229.95
258.30
297.15
345.45
388.50
454.65
515.55
558.60
651.00
687.75
845.25
1,013.25
1,197.00
1,368.15
1,557.15
1,627.50
2,244.90
2,719.50
Wt. Per
In.
11.65
17.50
7.08
6.44
12.93
ALUMINUM & STAINLESS, INC.
STAINLESS STEEL SHEETS
T304 / 304L T316 / T316L
T310 T410
No. 2B & No. 3/PVC Finish
Thickness
Width
and
Length
Est. Wt.
Lbs. per
Sheet
Thickness
Width
and
Length
Est. Wt.
Lbs. per
Sheet
26 Ga.-(.018”)
36 x 120
24
18 Ga.-(.048”)
48 x 96
.756 Lb. Sq. Ft.
48 x 120
32
2.016 Lb. Sq. Ft.
48 x 120
24 Ga.-(.024”)
48 x 120
40
1.008 Lb. Sq. Ft.
22 Ga.-(.030”)
48 x 120
50
1.260 Lb. Sq. Ft.
Thickness
Width
and
Length
Est. Wt.
Lbs. per
Sheet
65
12 Ga.-(.105”)
48 x 120
176
81
4.410 Lb. Sq. Ft.
16 Ga.-(.060”)
48 x 96
81
11 Ga.-(.120”)
48 x 120
202
2.520 Lb. Sq. Ft.
48 x 120
101
5.050 Lb. Sq. Ft.
60 x 120
252
60 x 120
126
14 Ga.-(.075”)
20 Ga.-(.036”)
36 x 120
44
1.512 Lb. Sq. Ft.
48 x 120
59
48 x 120
126
10 Ga.-(.135”)
48 x 120
227
5.670 Lb. Sq. Ft.
60 x 120
284
3.150 Lb. Sq. Ft.
STAINLESS STEEL PLATE
3/16”-(.188”)
8.579 Lb. Sq. Ft.
1/4”-(.250”)
11.162 Lb. Sq. Ft
5/16”-(.313”)
13.746 Lb. Sq. Ft.
3/4”-(.750”)
32.123 Lb. Sq. Ft
T304 / 304L
Thickness –
3/16” Thru 2”
Widths –
48” Thru 96”
Lengths –
3/8”-(.375”)
16.496 Lb. Sq. Ft
1/2”-(.500”)
21.663 Lb. Sq. Ft
5/8”-(.625”)
26.831 Lb. Sq. Ft.
T316 / T316L
T31OS
240” R/L
T41OS
Thickness –
3/16” Thru 1/2”
Widths –
48” Thru 96”
Lengths –
240” R/L
1”-(1.00”)
42.665 Lb. Sq. Ft.
11/4”-(1.250”)
53.837 Lb. Sq. Ft
11/2”-(1.500”)
64.328 Lb. Sq. Ft
13/4”-(1.750”)
74.788 Lb. Sq. Ft
2”-(2.000”)
85.330 Lb. Sq. Ft
We will shear or plasma cut to your required shape and size.
Call for small or large quantities.
–
14 –
Lafayette
New Orleans
800-252-9074
800-535-9156
STAINLESS STEEL ROUND ROD
Annealed and Cold Drawn
10-12 Foot Random Lengths
Alloys 303, 304, 316, 416, 17-4
Size Inches
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
15/16
1
11/8
13/16
11/4
15/16
13/8
17/16
11/2
15/8
111/16
13/4
17/8
115/16
Wt.
Per Ft.
.042
.094
.167
.262
.376
.514
.668
.845
1.043
1.262
1.502
2.045
2.347
2.670
3.379
3.760
4.173
4.600
5.049
5.518
6.008
7.051
7.604
8.180
9.390
10.024
Size Inches
2
21/8
21/4
23/8
21/2
25/8
23/4
27/8
3
31/4
31/2
33/4
4
41/4
41/2
5
51/2
6
61/2
7
71/2
8
81/2
9
10
12
STAINLESS STEEL SQUARE BAR
STAINLESS STEEL HEXAGON BAR
Annealed and Cold Drawn
10-12 Foot Random Lengths
Size Inches
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
11/4
11/2
2
Wt.
Per Ft.
10.881
12.060
13.520
15.063
16.680
18.400
20.195
22.072
24.030
28.206
32.712
37.560
42.730
48.233
54.075
68.760
80.778
96.140
117.340
130.848
150.208
170.903
192.934
216.299
267.036
384.500
Annealed and Cold Drawn
10-12 Foot Random Lengths
Wt.
Per Ft.
.119
.214
.344
.481
.651
.855
1.330
1.920
2.606
3.420
5.310
7.650
13.600
Size Inches
1/4
5/16
3/8
7/16
1/2
5/8
11/16
3/4
–
15 –
Wt.
Per Ft.
.184
.288
.414
.564
.737
1.150
1.393
1.658
1
2.945
11/4
4.600
11/2
6.630
2
11.780
ALUMINUM & STAINLESS, INC.
17-4 STAINLESS BOAT SHAFTING
17-4 PH CONDITION H1150
Also Available 19 & 22
Straightened, Ground, & Polished to Boat Shaft Specifications
Length
Approx
Size
In
Wt. Per
Inches
Feet
Foot
1
12
2.670
1
20
11/8
20 3.379
11/4 12
11/4
14 4.173
11/4
20
13/8
12
13/8
16 5.049
13/8
20
11/2
12
11/2
14 6.008
11/2
16
11/2
20
13/4
16
8.180
13/4
20
2
12
2
14 10.681
2
16
Length
Approx
Size
In
Wt. Per
Inches
Feet
Foot
2
12
10.681
2
20
21/4 8’ 10”
21/4
11
21/4
12
21/4
16
13.520
21/4
18
21/4
20
21/2 12
21/2 14
21/2 16 16.690
21/2
18
21/2
20
3
16
3
18
24.030
3
20
3
22
31/2
16 32.712
STAINLESS
PUMP SHAFT QUALITY ROD
Wt.
Per Length
416
Size
316
X
X
X
X
114
X
1/2
5/8
3/4
7/8
132
X
1
X
X
X
96.140
.0010”/Side Min. Chrome
12 and 24 Foot Lengths
X
60
6
28
6
30
CHROME ROD
C1045
TYPE 416 & 316
20 Foot Lengths
Size “
Length
Approx
Size
In
Wt. Per
Inches
Feet
Foot
31/2
18
31/2
19
31/2
20 32.712
31/2
22
31/2
24
35/8
18
35/8
20
35/8
22
35.090
35/8
24
35/8
28
35/8
29
4
18
4
20
42.730
4
22
4
26
41/2
26
54.13
5
26 66.760
51/2 —
80.78
Wt.
Per Length
Size
Wt.
Per Length
.67
21/4
13.50
1.04
21/2
16.70
1.52
23/4
20.20
2.04
3
24.00
2.67
31/4
28.40
11/8
3.38
31/2
32.70
11/4
4.17
33/4
37.50
1
13/16
77
11/4
92
17/16
11/2
X
111/16
162
X
13/4
172
115/16
224
X
X
13/8
5.05
4
42.71
2
240
X
11/2
6.01
41/2
54.08
23/16
261
X
15/8
7.058
5
66.80
27/16
317
X
13/4
8.20
51/2
80.86
211/16
434
X
2
10.70
6
96.10
3
500
X
7
130.83
–
16 –
Lafayette
New Orleans
800-252-9074
800-535-9156
STAINLESS STEEL FLAT BAR
Hot Rolled, Annealed and Pickled
10-12 Foot Random Lengths
Alloys 304, 304L, 316, 316L
Size Inches
1/8 x 1/2
x 3/4
x 1
x 11/4
x 11/2
x 2
x 21/2
x 3
x 4
Wt.
Per Ft.
.213
.319
.425
.531
.638
.850
1.060
1.280
1.700
3/16 x 1
x 11/4
x 11/2
x
x
x
x
.638
.797
.957
1.280
1.910
2.237
2.550
2
3
31/2
4
Size Inches
1/4 x 1/2
x 3/4
x 1
x 11/4
x 11/2
x 2
x 21/2
x 3
x 4
x 6
x 8
Wt.
Per Ft.
.425
.636
.850
1.060
1.280
1.700
2.120
2.550
3.400
5.105
6.810
3/8 x 1
x 11/4
x 11/2
x
x
x
x
1.280
1.594
1.920
2.550
3.830
5.100
7.657
2
3
4
6
Size Inches
1/2 x 1
x 11/4
x 11/2
x 2
x 21/2
x 3
x 4
x 6
Wt.
Per Ft.
1.700
2.125
2.550
3.400
4.250
5.100
6.800
10.210
3/4 x 2
x 3
x 4
5.100
7.650
10.200
1 x 2
x 3
x 4
6.800
10.200
13.600
STAINLESS STEEL ANGLES
20 Foot Random Lengths
304,304L, 316, 316L
Size Inches
3/4 x 3/4 x 1/8
1 x 1 x 1/8
3/16
1/4
11/4 x 11/4 x 1/8
3/16
1/4
11/2 x 11/2 x 1/8
3/16
1/4
2 x 2 x 1/8
3/16
1/4
3/8
21/2 x 21/2 x 3/16
1/4
3/8
3 x 3 x 1/4
3/8
4 x 4 x 1/4
3/8
1/2
WE CAN SHEAR FLAT BAR
THRU 1/2” THICK IN
144” LENGTHS TO
MEET YOUR
SPECIAL REQUIREMENTS
Wt.
Per Ft.
.59
.80
1.16
1.49
1.01
1.48
1.92
Also Stocking:
1.23
1.80
2.34
STAINLESS STEEL
INTERNAL / EXTERNAL
DOOR DOGS
1.65
2.44
3.19
4.70
3.07
4.10
5.86
4.90
7.20
6.60
9.57
12.80
–
17 –
ALUMINUM & STAINLESS, INC.
STAINLESS STEEL PIPE
Full Finish - Annealed and Pickled
17-24 Foot Random Lengths
ASTM A312
Alloys 304, 304L, 316, 316L
SCHEDULE 10, I.P.S.
SCHEDULE 40 (STD), I.P.S.
Wall
Pipe Size O.D. Thickness
Inches
Inches
Inches
1/2
.840
.083
3/4
1.050 .083 1
1.315 .109 11/4 1.660 .109 11/2
1.900 .109 2
2.375 .109 21/2 2.875 .120 Lbs. Per
Foot
.671
.857
1.404
1.806
2.085
2.638
3.531
4.332
5.613
7.770
9.289
13.400
18.650
24.200
46.270
3
4
5
6
8
10 12 20
3.500 4.500 5.563
6.625 8.625 10.750 12.750 20.000
.120 .120 .134
.134 .148 .165 .180 .218
*Available in Seamless and Welded
Wall
Pipe Size O.D. Thickness Lbs. Per
Inches
Inches
Inches
Foot
1/4 .540 .088 .425
3/8
.675 .091 .565
1/2
.840 .109 .851
3/4
1.050 .113 1.131
1
1.315 .133 1.679
11/4
1.660 .140 2.273
11/2
1.900 .145 2.718
2
2.375 .154 3.653
21/2
2.875 .203 5.793
3
3.500 .216 7.576
31/2
4.000 .226 9.110
4
4.500 .237 10.790
5
5.563 .258 14.620
6
6.625 .280 18.970
8
8.625 .322 28.550
10 10.750 .365 40.480
12 12.750 .406 53.530
20
20.000
.593
122.909
SCHEDULE 80, I.P.S.
Wall
Pipe Size O.D. Thickness
Inches
Inches
Inches
1/4
.540 .119 3/8
.675 .128 1/2
.840 .147 3/4
1.050 .154 1
1.315 .179 11/4
1.660 .191 11/2
1.900 .200 Lbs. Per
Foot
.54
.74
1.09
1.47
2.17
3.00
3.63
5.02
7.66
10.25
12.51
14.98
28.57
43.39
2
21/2
3
31/2
4
6
8
2.375 2.875 3.500 4.000 4.500 6.625 8.625
.218 .276 .300 .318 .337 .432 .500
STAINLESS STEEL TUBING
Full Finish - Annealed and Pickled
17-24 Foot Straight Random Lengths
Various Alloys Available
Diameter
1/4
3/8
1/2
5/8
5/8
3/4
3/4
7/8
Wall
Thickness
.065
.035
.035
.065
.120
.049
.065
.065
Diameter
1
11/4
11/4
11/2
11/2
15/8
13/4
Wall
Thickness
.065
.049
.065
.049
.065
.065
.250
Diameter
2
2
2
3
31/4
4
41/2
Wall
Thickness
.065
.120
.250
.065
.375
.188
.250
STAINLESS STRUCTURAL TUBING
20 Foot Lengths
MILL FINISH
Size
1/2 x 1
3/4 x 3/4
3/4 x 3/4
1 x 1
1 x 1
1 x 11/2
11/4 x 11/4
11/4 x 11/4
Wall
Thickness
.065
.065
.120
.065
.120
.120
.065
.120
Size
11/2 x 11/2
11/2 x 11/2
11/2 x 11/2
2 x 2
2 x 2
2 x 2
2 x 2
21/2 x 21/2
3 x 3
Larger Sizes Available
POLISHED TUBING AVAILABLE IN ALL SIZES
–
18 –
Wall
Thickness
.065
.120
.180
.065
.120
.188
.250
.120
.120
Lafayette
New Orleans
800-252-9074
800-535-9156
UNEQUAL LEG STAINLESS ANGLE BARS
20 Foot Random Length*
To Specs: QQS-ASTM-ASME-AMS
CATALOG
NUMBER
DIMENSIONS
WT/FT
KGUA200
KGUR215
KGUE220
KGUA300
KGUA310
KGUA320
KGUA400
KGUA410
KGUA500
2 x 11/4
3 x 11/2 x 3/16
3 x 11/2 x 1/4
3 x 2 x 3/16
3 x 2 x 1/4
3 x 2 x 3/8
4 x 3 x 1/4
4 x 3 x 3/8
5 x 3 x 1/4
2.370
3.010
3.510
3.070
4.100
5.900
5.800
8.500
6.680
Grades: T304/304L and T316/316L
CATALOG
NUMBER
DIMENSIONS
KGUA510
KGUW260
KGUW265
KGUW270
KGUA600
KGUA610
KGUA620
K6UA630
5 x 3 x 3/8
5 x 4 x 1/4
5 x 4 x 3/8
6 x 3 x 1/4
6 x 3 x 3/8
8 x 4 x 1/4
6 x 4 x 3/8
8 x 4 x 1/2
WT/FT
9.850
7.520
11.150
7.520
11.200
9.210
12.300
18.200
STAINLESS STEEL BEAMS
20 Foot Random Length*
To Specs: QQS-ASTM-ASME-AMS
Grades: T304/T304L and T316/T316L
CATALOG
NUMBER
NOMINAL SIZE
WT/FT
DEPTH OF FLANGE
FLANGE
WEB
SECTION WIDTH THICKNESS THICKNESS
KGSB300
3” (3S @ 5.7)
6.330
3.000
2.330
0.260
0.170
KGSB400
4” (4S @ 7.7)
8.850
4.000
2.663
0.293
0.193
4.000
2.663
0.437
0.250
4”
KGSB600
6” (6S @ 12.5)
14.200
6.000
3.332
0.359
0.232
KGSB620
6” (6S @ 17.25)
Wide Range
Beams
4” (4W @ 13)
19.600
6.000
3.559
0.401
0.465
14.400
4.160
4.060
0.345
0.280
14.400
6.030
4.000
0.280
0.232
7.610
9.250
12.510
16.930
3.000
4.000
5.000
6.000
2.375
2.750
3.000
3.332
0.187
0.190
0.201
0.220
0.250
0.250
0.326
0.359
22.200
22.000
34.470
5.910
5.910
7.874
5.910
5.910
7.874
0.315
0.394
0.472
0.394
0.315
0.314
KGWB420
KGWB620
6” (6W @ 12)
Extruded
Shapes
KGSB310
3”
KQSB410
4”
KGSB500
5”
KGSB610
6”
Welded
Shapes
KGSB630W 150 x 150 x 8 x 10mm
KGWB630
6”
KGWB800
8”
–
19 –
ALUMINUM & STAINLESS, INC.
STAINLESS I-BEAM - Dimensions & Specifications
20 Foot Random Lengths
Unit
Weight
CHARACTERISTICS OF SECTION
Position of Center
of Gravity
cm
Sectional
Area
cm^2
Moment
of Inertia
cm^4
Moment of
Resistance
cm^3
Radius of
Gyration
cm
Catalog
Number
Size (mm)
H x D x Web x FI Thk
KG/m
Cx
Cy
A
Ix
ly
Wx
Wy
Ix
ly
KGSB300
76.2 x 59.2 x 4.3 x 6.6
7.8
0
0
9.74
95.48
17.64
25.06
5.96
3.13
1.35
KGSB310
76.2 x 60.3 x 6.35 x 9.5
10.2
0
0
12.72
115.45
21.56
30.30
7.15
3.01
1.30
KGSB400
101.6 x 67.6 x 4.9 x 7.4
10.4
0
0
12.91
223.12
27.43
43.92
8.11
4.16
1.46
KGSB410
101.6 x 69.85 x 6.35 x 9.0
10.2
0
0
15.68
257.73
33.51
50.73
9.59
4.05
1.46
KGSB500
127 x 76.2 x 8.3 x 10.8
17.2
0
0
21.52
527.57
48.49
83.08
12.73
4.95
1.50
KGSB600
152.4 x 84.6 x 5.9 x 9.1
16.6
0
0
20.73
793.65
64.05
104.15
15.14
6.19
1.76
KGSB610
152.4 x 84.6 x 9.12 x 11.91
22.0
0
0
27.52
958.68
73.08
125.81
17.28
5.90
1.63
KGSB620
152.4 x 90.4 x 11.6 x 10.18
26.4
0
0
33.59
1129.69
111.38
148.25
24.64
5.80
1.82
KQWB420
105.7 x 103.1 x 7.1 x 8.8
20.0
0
0
25.04
477.21
169.44
90.38
30.96
4.36
2.52
KQWB620
153.2 x 101.6 x 5.9 x 7.1
18.4
0
0
22.97
924.17
122.77
120.65
24.17
6.34
2.31
KGWB630w*
150 x 150 x 8 x 10
31.9
0
0
41.03
1640
563
219
75.1
6.33
3.71
KQWB800w*
200 x 200 x 8 x 12
49.0
0
0
62.71
4660
1600
466
160
8.62
5.05
Catalog
Number
Inch Conversion
#/feet
Description
KGSB300
3 x 2.331 x .169 x .260
5.24
S3 @ 5.7 lbs/ft Profile
KGSB310
3 x 2.375 x .250 x .374
6.85
Proprietary Size
KGSB400
4 x 2.661 x .193 x .291
6.99
S4 @ 7.7 lbs/ft Profile
KGSB410
4 x 2.750 x .250 x .190
6.85
Proprietary Size
KGSB500
5 x 3 x .326 x .425
11.56
Proprietary Size
KGSB600
6 x 3.331 x .232 x .358
11.15
S6 @ 12.5 lbs/ft Profile
KGSB610
6 x 3.332 x .359 x .469
14.78
Proprietary Size
KGSB620
6 x 3.559 x .465 x .401
17.74
S6 @ 17.25 lbs/ft Profile
KQWB420
4.160 x 4.060 x .280 x .345
13.44
W4 @ 13 lbs/ft Profile
KGWB620
6.030 x 4.000 x .232 x .280
12.36
W6 @ 12 lbs/ft Profile
KGWB630w*
5.91 x 5.91 x .315 x .394
21.43
Welded Section
KGWB800w
7.874 x 7.874 x .315 x .472
32.92
Welded Section
t2
t2
H
B
w*: Welded Sections
ey
Y
iy
ix
b1
iy
x
b2
x
ix
t2
Y
t1
ex
c= b1-b2
2
t2
Weight Discaimer: “WT/FT shown for all extruded shapes is calculated based on tolerances given in ASTM A484 factored to the PLUS
side. These shapes are in 20’/25’ random lengths.”
–
20 –
Lafayette
New Orleans
800-252-9074
800-535-9156
STAINLESS STEEL CHANNELS
20 Foot Random Lengths
To Specs: QQS-ASTM-ASME-AMS
Grades: T304/T304L and T316/T316L
CATALOG
NUMBER
NOMINAL SIZE
WT/FT
DEPTH OF
SECTION
FLANGE
WIDTH
WEB
THICKNESS
KGCE330
3” (3 @ 4.1 Profile)
4.670
3.000
1.410
.170
KGCE420
4” (4 @ 5.4 Profile)
6.120
4.000
1.580
.180
KGCE430
4” (4 @ 7.25 Profile)
8.110
4.000
1.720
.320
KGCE510
5” (5 @ 9 Profile)
11.720
5.000
1.875
.375
KGCE620
6” (6 @ 8.2 Profile)
9.880
6.000
1.920
.200
KGCE630
6” (6 @ 10.5 Profile)
12.890
6.000
2.034
.314
KGCE820
8” (8 @ 18.75 Profile)
20.000
8.000
2.530
.500
2 x 1 x 3/16”
2.890
2.000
1.000
.188
KGCE220
2 x 1 x 1/4”
3.500
2.000
1.000
.250
KGCE310
3 x 11/2 x 3/16”
4.800
3.000
1.500
.180
Extruded Non-Tapered
KGCE210
KGCE320
3 x 11/2 x 1/4”
5.380
3.000
1.500
.250
KGCE500
5 x 21/2 x 1/4”
8.390
5.000
2.500
.250
KGCE600
6 x 3 x 1/4”
11.760
6.000
3.000
.250
KGGE610
6 x 3 x 3/8”
17.290
6.000
3.000
.375
3.000
1.375
.188
Hot-Rolled Shapes-Non Tapered
KGCR300
3 x 13/8 x 3/16”
3.550
KGCR400
4 x 13/4 x 1/4”
6.200
4.000
1.750
.250
KGCR410
4 x 2 x 1/4”
6.650
4.000
2.000
.250
KGCR150
40 x 20 x 3 mm
1.220
1.575
0.787
.118
KGCR200
50 x 25 x 3 mm
1.550
1.969
0.984
.118
Welded Shapes
KGWC800
8 x 4 x 1/4”
13.700
8.000
4.000
.250
KGWC810
8 x 4 x 3/8”
20.000
8.000
4.000
.375
Y
Cy
B
t
r2
r1
r2
r1
H
t
X
90 deg +/- 2 deg
H
t
X
r1
t
Y
t
* Center of Gravity Measurements for Extruded Sections: X = Measurement from top of Flange, Y =
–
21 –
r2
B
1/2 of Height Measurement.
ALUMINUM & STAINLESS, INC.
STAINLESS STEEL CHANNEL - Dimensions & Specifications
CHARACTERISTICS OF SECTION
Size (mm)
H x F x Web
Position of Center
of Gravity
Cm
Sectional
Area
cm^2
Moment
of Inertia
cm^4
Radius of
Gyration
cm
Cx
Cy
A
Ix
ly
Zx
Zy
ix
iy
KGCR150
40 x 20 x 3
0
0.59
2.272
5.22
0.778
2.61
0.552
1.52
0.585
KGCR200
50 x 25 x 3
0
0.715
2.872
10.6
1.6
4.26
0.896
1.92
0.746
KQCE210
50.8 x 25.4 x 4.75
1.75
2.54
4.37
2.34
15.51
1.34
6.11
0.73
1.88
KGCE220
50.8 x 25.4 x 6.35
1.71
2.54
5.58
2.83
18.66
1.65
7.35
0.71
1.83
KGCR300
76.2 x 34.52 x 4.76
0
0.996
6.55
54.8
7.04
14.4
2.82
2.89
1.04
KQCE310
76.2 x 38.1 x 4.8
2.69
3.81
6.95
8.93
58.53
3.32
15.36
1.13
2.9
KGCE320
76.2 x 38.1 x 6.35
2.65
3.81
8.97
11.21
73.43
4.23
19.27
1.12
2.86
KGCR400
101.6 x 44.45 x 6.35
0
1.25
11.43
168
19.4
33.1
6.07
3.83
1.3
KGCR410
101.6 x 50.8 x 6.35
0
1.47
12.21
186
28.2
36.6
7.81
3.9
1.52
KGCE500
127 x 63.5 x 6.35
4.56
6.35
15.33
57.4
372.77
12.59
58.7
1.93
4.93
KGCE600
152.4 x 76.2 x 6.35
5.51
7.62
18.52
101.72
658.79
18.46
86.46
2.34
5.96
KGCE610
152.4 x 76.2 x 9.5
5.38
7.62
27.27
145.3
932.47
27.01
122.37
2.31
5.85
KGWC800
203.2 x 101.6 x 6.35
0
2.72
25.36
1650
251
162
33.7
8.06
3.15
KGWC810
203.2 x 101.6 x 9.52
0
2.83
37.1
2330
353
229
48.2
7.92
3.09
KGCE330
76.2 x 35.8 x 4.3
2.45
3.81
7.56
8.27
67.02
3.38
17.59
1.05
2.98
KGCE420
101.6 x 40.2 x 4.7
2.84
5.08
10.42
13.54
163.49
4.77
32.18
1.14
3.96
KGCE430
101.6 x 43.7 x 8.1
3.18
5.08
13.89
18.44
193.56
5.8
38.1
1.15
3.73
KGCE510
127 x 47.6 x 9.5
3.46
6.35
19.6
30.87
418.52
8.92
65.91
1.25
4.62
KGCE620
152.4 x 48.8 x 5.1
3.56
7.62
15.62
29.2
550.12
8.2
72.19
1.37
5.93
KGCE630
152.4 x 51.7 x 8
3.94
7.62
19.49
34.02
611.26
8.63
80.22
1.32
5.6
Inches Conversion
1.57 x .787 x .118
1.97 x .984 x .118
2 x 1 x 3/16
2 x 1 x 1/4
3 x 1-3/8 x 3/16
Moment of
Resistance
crn^3
Description
Proprietary Size
Proprietary Size
2”Bar Channel
2”Bar Channel
Proprietary Size
3 x 1-1/2 x 3/16
3 x 1-1/2 x 1/4
4 x 1-3/4 x 1/4
4 x 2 x 1/4
5 x 2-1/2 x 1/4
6 x 3 x 1/4
6 x 3 x 3/8
8 x 4 x 1/4
8 x 4 x 3/8
3 x 1.41 x .170
4 x 1.583 x .185
4 x 1.720 x .319
5 x 1-7/8 x 3/8
6 x 1.92 x .200
6 x 2.035 x .315
3” Non-Tapered Channel
3” Non-Tapered Channel
Proprietary Size
Proprietary Size
5” Non-Tapered Channel
6” Non-Tapered Channel
6” Non-Tapered Channel
8” Non-Tapered Channel (welded)
8” Non-Tapered Channel (welded)
C3 @ 4.1 lbs/ft Profile
C4 @ 5.4 lbs/ft Profile
C4 @ 7.25 lbs/ft Profile
C5 @ 9.0 lbs/ft Profile (close)
C6 @ 8.2 lbs/ft Profile
C6 @ 10.5 lbs/ft Profile
Weight Disclaimer: “WT/FT shown for all extruded shapes is calculated based on tolerances given in ASTM A484 factored to the PLUS side. These
shapes are in 20’/25’ random lengths.”
–
22 –
Lafayette
New Orleans
800-252-9074
800-535-9156
DIMENSIONS, WEIGHTS AND PRESSURES FOR SEAMLESS STAINLESS STEEL PIPE
SCHEDULE 10S, 40S, 80S
*Theoretical
Internal
Nom.
Schedule
Outside
Wall
Inside
Bursting
Cross-Sect.
Size
Number
Diameter
Thickness
Diameter
Pressure
Area
(Inches)
(Inches)
(Inches)
(Inches)
(PSI)
(Sq. In.)
10
1.050
.083
.884
11,850
.614
3/4
40
1.050
.113
.824
16,142
.533
80
1.050
.154
.742
22,000
.432
10
1.315
.109
1.097
12,415
.945
1
40
1.315
.133
1.049
15,171
.864
80
1.315
.179
.957
20,418
.719
10
1.660
.109
1.442
9,850
1.495
11/4
40
1.660
.140
1.380
12,650
1.103
80
1.660
.191
1.278
17,259
1.283
10
1.900
.109
1.682
8,600
2.222
11/2
40
1.900
.145
1.610
11,447
2.036
80
1.900
.200
1.500
15,789
1.767
10
2.375
.109
2.157
6,889
3.654
2
40
2.375
.154
2.067
9,726
3.355
80
2.375
.218
1.939
13,768
2.953
10
2.875
.120
2.635
6,260
5.453
21/2
40
2.875
.203
2.469
10,591
4.788
80
2.875
.279
2.323
14,400
4.238
10
3.500
.120
3.260
5,140
8.346
3
40
3.500
.216
3.068
9,257
7.393
80
3.500
.300
2.900
12,857
6.605
10
4.000
.120
3.760
4,500
11.100
31/2
40
4.000
.226
3.548
8,475
9.887
80
4.000
.318
3.364
11,925
8.888
10
4.500
.120
4.260
4,000
14.250
4
40
4.500
.237
4.026
7,900
12.731
80
4.500
.337
3.826
11,233
11.497
10
5.563
.134
5.295
3,610
22.020
5
40
5.563
.258
5.047
6,956
20.000
80
5.563
.375
4.813
10,111
18.194
10
6.625
.134
6.357
3,035
31.740
6
40
6.625
.280
6.065
6,340
28.890
80
6.625
.432
5.761
9,781
26.067
10
8.625
.148
8.329
2,570
54.480
8
40
8.625
.322
7.981
5,600
50.030
80
8.625
.500
7.625
8,696
45.664
10
10.750
.165
10.420
2,300
85.270
10
40
10.750
.365
10.020
5,093
78.850
80
10.750
.500
9.750
6,977
74.662
10
12.750
.180
12.390
2,120
120.570
12
40
12.750
.375
12.000
4,411
98.310
80
12.750
.500
11.750
5,882
108.434
10
14.000
.188
13.624
2,016
145.710
14
40
14.000
.375
13.250
4,018
135.320
80
14.000
.500
13.000
5,357
132.732
10
16.000
.188
15.624
1,763
191.620
16
40
16.000
.375
15.250
3,516
176.720
80
16.000
.500
15.000
4,688
176.715
Based on formula P = 2f t
d
f = Fiber
d = Outside
P = Pressure in pounds per square inch
t = Thickness of wall in inches
(f = 75,000 for 300 series stainless)
FOR CALCULATING APPROXIMATE
BURST PRESSURES FOR 300
SERIES STAINLESS PIPE OR
TUBING, USE THIS FORMULA:
*BURSTING PRESSURE BASED ON FIBER STRESS 0F 75,000
–
23 –
Weight
Lb. Per
(Lineal Ft.)
.857
1.131
1.474
1.404
1.679
2.172
1.806
2.273
2.997
2.085
2.718
3.631
2.638
3.653
5.022
5.531
5.793
7.661
4.332
7.576
10.253
4.973
9.109
12.505
5.613
10.790
14.983
7.770
14.620
20.778
9.289
18.970
28.573
13.400
28.550
43.388
18.650
40.800
54.735
24.160
49.560
65.415
27.610
54.570
72.090
31.620
62.580
82.770
ALUMINUM & STAINLESS, INC.
CAST IRON
Continuous Cast Gray Iron Bar Stock
Round Solid Bars 6’0” Long
Centerless Ground + .010 - .000 Sizes up to 6” (incl.)
Sizes over 6” are “AS CAST” with 1/8” machining
allowance to provide clean finishes to the listed size
Diam-
eter
3/4 7/8
1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/8
21/4
23/8
21/2 25/8
23/4
Weight
Per Foot
1.70
2.30
2.90 3.60 4.40 5.30 6.20 7.20 8.30 9.50
10.70
12.20
13.60
15.10
16.70
18.30
20.00
Weight Per
6 Foot Bar
10.2
13.8
17.4
21.6
26.4
31.8
37.2
43.2
49.8
57.0
64.2
73.2
81.6
90.6
100.2
109.8
120.0
Diam-
eter
27/8
3
31/8
31/4
33/8
31/2
35/8
33/4
4
41/4
41/2
43/4
5
51/4
51/2
53/4
6
Weight
Per Foot
21.80
23.70 25.90
27.90
30.00
32.20
34.50
36.80
41.70 47.20
52.80
58.60
64.70
71.60
78.40
85.40
92.80
Weight Per
6 Foot Bar
130.8
142.2
155.4
167.4
180.0
193.2
207.0
220.8
250.2
283.2
316.8
351.6
388.2
429.6
470.4
512.4
556.8
Diam-
eter
61/4
61/2
63/4
7
71/4
71/2
73/4
8
81/4 81/2
83/4
9
91/4
91/2
10
11
12
ACCESSORIES
Weight
Per Foot
101.00
109.0 117.3
126.0 135.6 144.9
154.5 164.4 175.6 186.2
197.0
208.1 221.3 233.1 257.7 318.5 387.9 Weight Per
6 Foot Bar
606.0
654.0
703.8
756.0
813.6
869.4
927.0
986.4
1053.6
1117.2
1182.0
1248.6
1327.8
1398.6
1546.2
1911.0
2327.4
Space limitations preclude a complete listing in this catalog of all the items we call accessories. Please review these six
pages for a sample of our stock; we hope you will call on us if we may be of service.
Among these useful items are Anodes
Fasteners
Hollaender Fittings
Thread Rod
Door Dogs
Fittings
Lead Sheet & Billet
Valves
Ductile Iron
Flanges
Plastic Pipe Plugs
Welding Rod & Wire
Expanded Metal
Hinges
Shim Stock
Wire Cloth
Cast Rope Spool
1” Dia Pulley
Fits 5” Pipe
Stanchion Tops
Fits 4” Pipe
Cast Rope Well
11/4 Dia. Round
Fits 6” x 11”
–
24 –
Dimensions of Seamless Weld Fittings
1/2
3/4
Pipe
O.D.
45 LONG
RAD.
WeldELL
90 REDUCING
L.R. WeldELL
*1
Light
Wall
Sch
20
Sch
30
K
B
A
A
90 LONG R AD
WeldE L L
Nom.
Pipe
Size
B
A
A
A
D
D
A
G
E
D
F
180 SHOR T R AD
WeldELL
90 SHOR T R AD
WeldELL
180º LONG RADIUS
WeldELL
WALL THICKNESS
CAP
LAP JOINT
STUB END
F
Nom
Pipe
Size
A
B
K
D
V
E
ASA
MSS
G
.294
.308
.358
.382
.400
11/2
11/8
11/2
17/8
21/4
5/8
7/16
7/8
1
11/8
17/8
111/16
23/16
23/4
31/4
...
...
1
11/4
11/2
...
...
15/8
21/16
27/16
1
11/2
11/2
11/2
11/2
3
3
4
4
4
2
2
2
2
2
13/8
111/16
2
21/2
27/8
1
11/4
11/2
Std
Sch
40
Sch
60
*3
X-Stg
Sch
80
Sch
100
Sch
120
Sch
140
Sch
160
XXStg
.109
.113
.133
.140
.145
...
...
...
...
...
.147
.154
.179
.191
.200
.147
.154
.179
.191
.200
...
...
...
...
...
...
...
...
...
...
...
...
.188
.219
.250
.250
.281
*2
V
D
1/2
3/4
1
11/4
11/2
.840
1.050
1.315
1.660
1.900
.083
.083
.109
.109
.109
...
...
...
...
...
...
...
...
.109
.113
.133
.140
.145
2
21/2
3
31/2
2.375
2.875
3.500
4.000
.109
.120
.120
.120
...
...
...
...
...
...
...
...
.154
.203
.216
.226
.154
.203
.216
.226
...
...
...
...
.218
.276
.300
.318
.218
.276
.300
.318
...
...
...
...
...
...
...
...
...
...
...
...
.344
.375
.438
...
.436
.552
.600
.636
3
33/4
41/2
51/4
13/8
13/4
2
21/4
43/16
53/16
61/4
71/4
2
21/2
3
31/2
33/16
315/16
43/4
51/2
11/2
11/2
2
21/2
6
6
6
6
21/2
21/2
21/2
3
35/8
41/8
5
51/2
2
21/2
3
31/2
4
5
6
8
4.500
5.563
6.625
8.625
.120
.134
.134
.148
...
...
...
.250
...
...
...
.277
.237
.258
.280
.322
.237
.258
.280
.322
...
...
...
.406
.337
.375
.432
.500
.337
.375
.432
.500
...
...
...
.594
.438
.500
.562
.719
...
...
...
.812
.531
.625
.719
.906
.674
.750
.864
.875
6
71/2
9
12
21/2
31/8
33/4
5
81/4
105/16
125/16
165/16
4
5
6
8
61/4
73/4
95/16
125/16
21/2
3
31/2
4
6
8
8
8
3
3
31/2
4
63/16
75/16
81/2
105/8
4
5
6
8
10
12
14
16
10.750
12.750
14.000
16.000
.165
.180
.250
.250
.250
.250
.312
.312
.307
.330
.375
.375
.365
.375
.375
.375
.365
.406
.438
.500
.500
.562
.594
.656
.500
.500
.500
.500
.594
.688
.750
.844
.719
.844
.938
1.031
.844
1.000
1.094
1.219
1.000
1.125
1.250
1.438
1.125
1.312
1.406
1.594
1.000
1.000
...
...
15
18
21
24
61/4
71/2
83/4
10
203/8
243/8
28
32
10
12
14
16
153/8
183/8
21
24
5
6
61/2
7
10
10
12
12
5
6
...
...
123/4
15
161/4
181/2
10
12
14
16
18
20
24
30
18.000
20.000
24.000
30.000
.250
.250
.250
.312
.312
.375
.375
.500
.438
.500
.562
.625
.375
.375
.375
.375
.562
.594
.688
...
.750
.812
.969
...
.500
.500
.500
.500
.938
1.031
1.219
...
1.156
1.281
1.531
...
1.375
1.500
1.812
...
1.562
1.750
2.062
...
1.781
1.969
2.344
...
...
...
...
...
27
30
36
45
111/4
121/2
15
181/2
36
40
48
60
18
20
24
30
27
30
36
45
8
9
101/2
101/2
12
12
12
...
...
...
...
21
23
271/4
...
18
20
24
30
36 *4
42 *4
36.000
42.000
.312
...
.500
...
.625
...
.375
.375
.750
...
...
...
.500
.500
...
...
...
...
...
...
...
...
...
...
...
...
54
63
221/2
26
...
...
36
48
54
...
101/2
12
...
...
...
...
...
...
36 *1
42 *1
C
M
STRAIGHT TEE
C
C
C
Nom
Pipe
Size
Outlet
C
M
H
3/4
3/4
1/2
11/8
11/8
...
11/8
...
11/2
1
3/4
1/2
1
11/2
11/2
11/2
...
11/2
11/2
...
2
2
11/4
1
17/8
17/8
17/8
17/8
...
17/8
17/8
17/8
...
2
2
2
11/2
11/4
1
21/4
21/4
21/4
21/4
21/4
...
21/4
21/4
21/4
21/4
...
21/2
21/2
21/2
21/2
2
11/2
11/4
1
3/4
21/2
21/2
21/2
21/2
21/2
...
23/8
21/4
2
13/4
...
3
3
3
3
21/2
21/2
2
11/2
11/4
1
3
3
3
3
3
...
23/4
25/8
21/2
21/4
...
31/2
31/2
31/2
31/2
3
3
21/2
2
11/2
11/4
33/8
33/8
33/8
33/8
33/8
...
31/4
3
27/8
23/4
31/2
3
21/2
2
11/2
33/4
33/4
33/4
33/4
33/4
...
35/8
31/2
31/4
31/8
11/4
11/2
2
31/2
3/4
1/2
3/4
1/2
CONCENTRIC
REDUCER
REDUCING TEE
ECCENTRIC
REDUCER
H
H
C
Nom
Pipe
Size
Outlet
C
M
H
4
4
31/2
3
21/2
2
11/2
41/8
41/8
41/8
41/8
41/8
41/8
...
4
37/8
33/4
31/2
33/8
...
4
4
4
4
4
5
5
4
31/2
3
21/2
2
47/8
47/8
47/8
47/8
47/8
47/8
...
45/8
41/2
43/8
41/4
41/8
...
5
5
5
5
5
6
6
5
4
31/2
3
21/2
55/8
55/8
55/8
55/8
55/8
55/8
...
53/8
51/8
5
47/8
43/4
...
51/2
51/2
51/2
51/2
51/2
8
8
6
5
4
31/2
7
7
7
7
7
...
65/8
63/8
61/8
6
...
6
6
6
6
...
31/2
31/2
31/2
31/2
10
10
8
6
5
4
81/2
81/2
81/2
81/2
81/2
...
8
75/8
71/2
71/4
...
7
7
7
7
...
4
4
4
4
12
12
10
8
6
5
10
10
10
10
10
...
91/2
9
85/8
81/2
...
8
8
8
8
–
Nom
Pipe
Size
Outlet
C
M
H
14
14
12
10
8
6
11
11
11
11
11
...
105/8
101/8
93/4
93/8
...
13
13
13
13
16
16
14
12
10
8
6
12
12
12
12
12
12
...
12
115/8
111/8
103/4
103/8
...
14
14
14
14
14
18
18
16
14
12
10
8
131/2
131/2
131/2
131/2
131/2
131/2
...
13
13
125/8
121/8
113/4
...
15
15
15
15
15
20
20
18
16
14
12
10
8
15
15
15
15
15
15
15
...
141/2
14
14
135/8
131/8
123/4
...
20
20
20
20
20
20
24 *4
24
20
18
16
14
12
10
17
17
17
17
17
17
17
...
17
161/2
16
16
155/8
151/8
...
20
20
20
20
20
20
25 –
Nom
Pipe
Size
Outlet
C
M
H
30 *4
30
24
20
18
16
14
22
22
22
22
22
22
...
21
20
191/2
19
19
...
24
24
24
24
24
36 *4
36
30
24
20
18
16
261/2
261/2
261/2
261/2
261/2
261/2
...
25
24
23
221/2
22
...
24
24
24
24
24
42 *4
42
36
30
24
20
30
30
30
30
30
...
28
28
26
26
...
24
24
24
24
NOTES:
1. Light Wall thicknesses are identical
to stainless steel Schedule 10S in sizes
thru 12”, and to Schedule 10 in.
sizes 14” and larger.
2. Standard Wall thicknesses are
identical to stainless steel Schedule
40S in sizes thru 12”.
3. Extra Strong Wall thicknesses are
identical to stainless steel Schedule
80S in sizes thru 12”.
4. May be of welded pipe, x-rayed
and stress-relieved.
5. Other types, sizes and thicknesses
of fittings are available.
ALUMINUM & STAINLESS, INC.
Dimensions of ANSI Forged Flanges
C
Y
WELD NECK FLANGE *1
150 LB. FLANGES
Nom.
Pipe
Size
O
C
31/2
37/8
41/4
45/8
5
6
7
71/2
81/2
9
10
11
131/2
16
19
21
231/2
25
271/2
32
383/4
46
7/16
1/2
9/16
5/8
11/16
3/4
7/8
15/16
15/16
15/16
15/16
1
11/8
13/16
11/4
13/8
17/16
19/16
111/16
17/8
21/8
23/8
1/2
3/4
1
11/4
11/2
33/4
45/8
47/8
51/4
61/8
9/16
5/8
11/16
13/16
7/8
21/16
21/4
27/16
25/8
23/4
2
21/2
3
31/2
4
5
6
8
10
12
14
16
18
20
24
30
36
61/2
71/2
81/4
9
103/4
13
14
161/2
20
22
233/4
27
291/4
32
37
441/2
513/4
1
11/8
11/4
13/8
11/2
13/4
17/8
23/16
21/2
25/8
23/4
3
31/4
31/2
4
41/2
47/8
27/8
31/8
31/4
33/8
4
41/2
45/8
51/4
6
61/8
61/2
7
71/4
71/2
8
93/4
111/8
1/2
3/4
51/4
51/2
61/4
71/4
8
91/4
101/2
12
14
161/2
19
213/4
261/2
30
13/16
11/4
13/8
11/2
13/4
2
21/4
25/8
3
35/8
41/4
5
61/2
71/4
1/2
3/4
1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
10
12
14
16
18
20
24
30
36
*2
Weld
Neck
Y*2
Slip
On
Thrd.
17/8
5/8
21/16
5/8
23/16
11/16
21/4
13/16
7/8
27/16
1
21/2
11/8
23/4
13/16
23/4
11/4
213/16
15/16
3
31/2
17/16
31/2
19/16
4
13/4
4
115/16
41/2
23/16
5
21/4
5
21/2
51/2
211/16
511/16
27/8
6
31/4
51/8
31/2
53/8
33/4
600 LB. FLANGES
7/8
1
11/16
11/8
11/4
17/16
15/8
113/16
115/16
21/8
23/8
25/8
3
31/8
35/8
311/16
43/16
45/8
5
51/2
93/4
111/8
2500 LB. FLANGES
27/8
19/16
31/8
111/16
31/2
17/8
33/4
21/16
43/8
23/8
5
23/4
55/8
31/8
65/8
35/8
71/2
41/4
9
51/8
6
103/4
7
121/2
9
161/2
10
181/4
300 LB. FLANGES
Lap
Joint
Bolt
Circle
5/8
5/8
11/16
13/16
7/8
23/8
23/4
31/8
31/2
33/8
43/4
51/2
6
7
71/2
81/2
91/2
113/4
141/4
17
183/4
211/4
223/4
25
291/2
36
423/4
No.
and
Size
of
Holes
4-5/8
4-5/8
4-5/8
4-5/8
4-5/8
4-3/4
4-3/4
4-3/4
8-3/4
8-3/4
8-7/8
8-7/8
8-7/8
12-1
12-1
12-11/8
16-11/8
16-11/4
20-11/4
20-13/8
28-13/8
32-15/8
1
11/8
13/16
11/4
15/16
17/16
19/16
13/4
115/16
23/16
31/8
37/16
313/16
41/16
43/8
...
...
Y*2
Slip
On
Thrd.
O
C
33/4
45/8
47/8
51/4
61/8
61/2
71/2
81/4
9
10
11
121/2
15
171/2
201/2
23
251/2
28
301/2
36
43
50
9/16
5/8
11/16
3/4
13/16
7/8
21/16
7/8
7/8
21/4
1
1
27/16
11/16
11/16
29/16
11/16
11/16
211/16
13/16
13/16
23/4
15/16
15/16
3
11/2
11/2
31/8
111/16
111/16
33/16
13/4
13/4
33/8
17/8
17/8
2
2
37/8
21/16
21/16
37/8
27/16
27/16
43/8
25/8
33/4
45/8
27/8
4
51/8
3
55/8
43/8
31/4
53/4
43/4
31/2
61/4
51/8
33/4
63/8
51/2
43/16
65/8
6
...
81/4
81/4
...
91/2
91/2
900 LB. FLANGES
7/8
*2
1
11/8
13/16
11/4
13/8
17/16
15/8
17/8
2
21/8
21/4
23/8
21/2
23/4
35/8
41/8
Weld
Neck
Lap
Joint
BLIND FLANGE
LAP JOINT FLANGE
THREADED FLANGE
SLIP-ON FLANGE
O
O
O
O
O
C
C Y
C Y
C Y
400 LB. FLANGES
O
C
25/8
31/4
31/2
37/8
41/2
5
57/8
65/8
71/4
77/8
91/4
105/8
13
151/4
173/4
201/4
221/2
243/4
27
32
391/4
46
No.
and
Size
of
Holes
4-5/8
4-3/4
4-3/4
4-3/4
4-7/8
8-3/4
8-7/8
8-7/8
8-7/8
8-7/8
8-7/8
12-7/8
12-1
16-11/8
16-11/4
20-11/4
20-13/8
24-13/8
24-13/8
24-15/8
28-17/8
32-21/8
33/4
45/8
47/8
51/4
61/8
61/2
71/2
81/4
9
10
11
121/2
15
171/2
201/2
23
251/2
28
301/2
36
43
50
9/16
5/8
11/16
13/16
7/8
1
11/8
11/4
13/8
13/8
11/2
15/8
17/8
21/8
21/4
23/8
21/2
25/8
23/4
3
4
41/2
Bolt
Circle
*2
21/16
21/4
27/16
25/8
23/4
27/8
31/8
31/4
33/8
31/2
4
41/16
45/8
47/8
53/8
57/8
6
61/2
65/8
67/8
85/8
97/8
Nom.
Pipe
Size
25/8
31/4
31/2
37/8
41/2
5
57/8
65/8
71/4
77/8
91/4
105/8
13
151/4
173/4
201/4
221/2
243/4
27
32
391/4
46
No.
and
Size
of
Holes
4-5/8
4-3/4
4-3/4
4-3/4
4-7/8
8-3/4
8-7/8
8-7/8
8-1
8-1
8-1
12-1
12-11/8
16-11/4
16-13/8
20-13/8
20-11/2
24-11/2
24-15/8
24-17/8
28-21/8
32-21/8
1/2
3/4
Y*2
Slip
On
Thrd.
Lap
Joint
Bolt
Circle
7/8
7/8
1
1
11/16
11/16
11/8
11/8
11/4
11/4
17/16
17/16
15/8
15/8
113/16
113/16
115/16
115/16
2
2
21/8
21/8
21/4
21/4
211/16
211/16
27/8
4
31/8
41/4
35/16
45/8
311/16
5
37/8
53/8
4
53/4
41/2
61/4
...
85/8
...
97/8
1500 LB. FLANGES
1/2
3/4
1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
10
12
14
16
18
20
24
30
36
1
11/16
11/8
11/4
17/16
15/8
113/16
115/16
21/8
23/8
25/8
3
43/8
45/8
5
51/2
6
61/2
71/4
...
...
25/8
31/4
31/2
37/8
41/2
4-5/8
4-3/4
4-3/4
4-3/4
4-7/8
43/4
51/8
57/8
61/4
7
1
11/8
11/8
11/4
23/8
23/4
27/8
27/8
31/4
11/4
13/8
15/8
15/8
13/4
11/4
13/8
15/8
15/8
13/4
31/4
31/2
4
43/8
47/8
4-7/8
4-7/8
4-1
4-1
4-11/8
43/4
51/8
57/8
61/4
7
11/8
11/8
11/8
11/4
23/8
23/4
27/8
27/8
31/4
11/4
13/8
15/8
15/8
13/4
11/4
13/8
15/8
15/8
13/4
31/4
31/2
4
43/8
47/8
4-7/8
4-7/8
4-1
4-1
4-11/8
1
11/4
11/2
5
57/8
65/8
71/4
81/2
101/2
111/2
133/4
17
191/4
203/4
233/4
253/4
281/2
33
401/4
47
8-3/4
8-7/8
8-7/8
8-1
8-1
8-11/8
12-11/8
12-11/4
16-13/8
20-13/8
20-11/2
20-15/8
20-13/4
24-13/4
24-2
28-21/8
28-25/8
81/2
95/8
91/2
...
111/2
133/4
15
181/2
211/2
24
251/4
273/4
31
333/4
41
481/2
571/2
11/2
15/8
11/2
...
13/4
2
23/16
21/2
23/4
31/8
33/8
31/2
4
41/4
51/2
57/8
63/4
4
41/8
4
...
41/2
5
51/2
63/8
71/4
77/8
83/8
81/2
9
93/4
111/2
121/4
141/4
21/4
21/2
21/8
...
23/4
31/8
33/8
4
41/4
45/8
51/8
51/4
6
61/4
8
121/4
141/4
21/4
21/2
21/8
...
23/4
31/8
33/8
41/2
5
55/8
61/8
61/2
71/2
81/4
101/2
...
...
61/2
71/2
71/2
...
91/4
11
121/2
151/2
181/2
21
22
241/4
27
291/2
351/2
423/4
503/4
8-1
8-11/8
8-1
...
8-11/4
8-13/8
12-11/4
12-11/2
16-11/2
20-11/2
20-15/8
20-13/4
20-2
20-21/8
20-25/8
20-31/8
20-35/8
81/2
95/8
101/2
...
121/4
143/4
151/2
19
23
261/2
291/2
321/2
36
383/4
46
...
...
11/2
15/8
17/8
...
21/8
27/8
31/4
35/8
41/4
47/8
51/4
53/4
63/8
7
8
...
...
4
41/8
45/8
...
47/8
61/8
63/4
83/8
10
111/8
113/4
121/4
127/8
14
16
...
...
21/4
21/2
27/8
...
39/16
41/8
411/16
55/8
61/4
71/8
...
...
...
...
...
...
...
21/4
21/2
27/8
...
39/16
41/8
411/16
55/8
7
85/8
91/2
101/4
107/8
111/2
13
...
...
61/2
71/2
8
...
91/2
111/2
121/2
151/2
19
221/2
25
273/4
301/2
323/4
39
...
...
8-1
8-11/8
8-11/4
...
8-13/8
8-15/8
12-11/2
12-13/4
12-2
16-21/8
16-23/8
16-25/8
16-27/8
16-31/8
16-35/8
...
...
2
21/2
3
31/2
4
5
6
8
10
12
14
16
18
20
24
30
36
19/16
111/16
17/8
21/16
23/8
23/4
31/8
35/8
41/4
51/8
6
7
9
10
31/2
33/4
41/4
51/8
53/4
63/4
73/4
9
103/4
123/4
141/2
171/4
211/4
243/8
7/8
Nom.
4-7/8
Outside Light
Pipe
4-7/8
Diam.
Wall
Size
1
4-1
11/4
4-11/8
0.840
0.674
1/2
3/4
11/2
4-11/4
1.050
0.884
1
1.315
1.097
2
8-11/8
21/2
8-11/4
1.660
1.442
11/4
3
8-13/8
1.900
1.682
11/2
4
8-15/8
2.375
2.157
2
5
8-17/8
2.875
2.635
21/2
6
8-21/8
3.500
3.260
3
8
12-21/8
4.000
3.760
31/2
10
12-25/8
4
4.500
4.260
12
12-27/8
5
5.563
5.295
6
6.625
6.357
8
8.625
8.329
NOTES:
10
10.750 10.420
12
12.750 12.390
1. Always specify bore when ordering.
14
14.000 13.500
2. Includes 1/16” raised face in 150 lb. and 300 lb standards.
16
16.000 15.500
Does not include 1/4” raised face in 400 lb. and heavier
18
18.000 17.500
standards.
20
20.000 19.500
3. Inside pipe diameters are also provided by this table.
24
24.000 23.500
4. Other types, sizes and facings on application.
30
30.000 29.376
5. Light Wall diameters are identical to stainless steel Schedule
36
36.000 35.376
10S in sizes thru 12”, and to Schedule 10 in sizes 14” and larger.
42
42.000
...
7/8
Weld
Neck
WELDING NECK FLANGE BORES *1 *3
Sched. Sched.
20
30
...
...
...
...
...
...
...
...
...
...
...
...
8.125
10.250
12.250
13.376
15.376
17.376
19.250
23.250
29.000
35.000
...
–
26 –
...
...
...
...
...
...
...
...
...
...
...
...
8.071
10.136
12.090
13.250
15.250
17.124
19.000
22.876
28.750
34.750
...
Std.
Wall
0.622
0.824
1.049
1.380
1.610
2.067
2.469
3.068
3.548
4.026
5.047
6.065
7.981
10.020
12.000
13.250
15.250
17.250
19.250
23.250
29.250
35.250
41.250
Sched. Sched. Extra Sched. Sched. Sched. Sched. Sched.
40
60
Strong
80
100
120
140
160
0.622
0.824
1.049
1.380
1.610
2.067
2.469
3.068
3.548
4.026
5.047
6.065
7.981
10.020
11.938
13.124
15.000
16.876
18.812
22.624
...
34.500
...
...
...
...
...
...
...
...
...
...
...
...
...
7.813
9.750
11.626
12.812
14.688
16.500
18.376
22.062
...
...
...
0.546
0.742
0.957
1.278
1.500
1.939
2.323
2.900
3.364
3.826
4.813
5.761
7.625
9.750
11.750
13.000
15.000
17.000
19.000
23.000
29.000
35.000
41.000
0.546
0.742
0.957
1.278
1.500
1.939
2.323
2.900
3.364
3.826
4.813
5.761
7.625
9.562
11.374
12.500
14.312
16.124
17.938
21.562
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
7.437
9.312
11.062
12.124
13.938
15.688
17.438
20.938
...
...
...
...
...
...
...
...
...
...
...
...
3.624
4.563
5.501
7.187
9.062
10.750
11.814
13.564
15.250
17.000
20.376
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
7.001
8.750
10.500
11.500
13.124
14.876
16.500
19.876
...
...
...
0.464
0.612
0.815
1.160
1.338
1.687
2.125
2.624
...
3.438
4.313
5.187
6.813
8.500
10.126
11.188
12.812
14.438
16.062
19.312
...
...
...
Double
Extra
Strong
0.252
0.434
0.599
0.896
1.100
1.503
1.771
2.300
2.728
3.152
4.063
4.897
6.875
8.750
10.750
...
...
...
...
...
...
...
...
Lafayette
New Orleans
800-252-9074
800-535-9156
ALUMINUM & STAINLESS BUTT
WELD FITTINGS
90º LONG RADIUS ELBOW
ALUMINUM, BRASS AND STAINLESS
THREADED PIPE FITTINGS
45º LONG RADIUS ELBOW
T
B
O.D.
O.D.
I.D.
T
I.D.
B
A
CAPS
TEES
O.D.
I.D.
O.D.
T
I.D.
M
T
R
O.D.
E
I.D.
C
CONCENTRIC REDUCERS
C
ECCENTRIC REDUCERS
WELD WIRE
Aluminum:
Stainless:
Alloy - 4043,5356
Alloy - 308L, 316L
Dia. - .030, .035, 3/64
Dia. - .035, .045
Roll Size - 1,12, 13, or 16 lbs
Roll Size - 25lbs
Rod Size - 1/8 x 36”
HULL ANODES
PVC MAG ANODES
SS TIE WIRE
1/16” x 5 lbs Spools
–
27 –
21/2, 5, 12, or 24 lbs
ZINC ANODES
5 , 12 , or 24 lbs
ALUMINUM & STAINLESS, INC.
STAINLESS HINGES, NO HOLES
Open
Width
Length
No. Inches Inches Gauge
A809
11/2
72 .040 A812
2
72 .050 A814
3
72 16 A806
3
72 14 Pin
Dia.
Inches
.091 .125 .125 .250 Knuckle
Length
Inches
1/2
1/2
1/2
1
ALUMINUM HINGES, NO HOLES
Open
Width
Length
No. Inches Inches Gauge
A702
11/2
72 .032 A708 2
72 .078 A713 2
72 .093 A715 3
72 .093 A717 4
72 .093 A723 3
72 .125 A724 4
72 .125 Pin
Type
Plain
Plain
Plain
Plain
STAINLESS BUTT HINGES, NO HOLES
No.
3025-SS
1241-SS
2125-SS
2153-SS
Open
Width
Length
Inches
Inches
Gauge
11/2 11/2 .0625 2
2
.0625 3
3
.125 4
4
.125 Pin
Dia.
Inches
.125 .125 .250 Pin
Type
Fast
Fast
Fast
.250 Fast
Pin
Dia.
Inches
.091 3/16
1/4
1/4
1/4
3/8
3/8
Knuckle
Length
Inches
1/4
1/2
1
1
1
2
2
ALUMINUM BUTT HINGES, NO HOLES
No.
546-A
546-C 546-D Open
Width
Length
Inches
Inches
Gauge
2
2
.064 3
3
.091 4
4
.125 Pin
Dia.
Inches
.125 .1875
.250
COMPRESSION SPRING CATCH
WITH PADLOCK EYE
HEAVY DUTY
PULL DOWN CATCHES
37/8” O.A.L.
HC 83314SS WITH PADLOCK EYE
HC207-ZINC PLATED
Strikers included with above
numbers
No. HC-83314-42 Stainless Steel Catch Without Padlock Eye
Striker Included
NO. S3-10 LINK-LOCK
NO. MSCS3 LINK-LOCK
FAST ENGAGEMENT:
No. S3-10SS
No. S3-01 Keeper Plate SS
Pin
Type
Plain
Plain
Plain
Plain
Plain
Plain
Plain
ALUMINUM HANDLE
180º turn locks or unlocks; positive locking
NH 984 AL RG
Has rubber grip & handle return spring
–
28 –
Pin
Type
Fast
Fast
Fast
Lafayette
New Orleans
800-252-9074
800-535-9156
EXPANDED METAL
Lbs.
Per
100
Sq. Ft
STYLE
Standard
Size Street (Feet)
Width
SWD
Length
LWD
Approx. No.
Meshes Per
Ft.
Width
Overall
Thinkness
(Inches)
SWD
LWD
Approx
(%)
Open
Area
Design Sizes
(Inches)
Opening Sizes
(Inches)
Approx. Strand
Size (Inches)
SWD
LWD
SWO
LWO
Thickness
ALUMINUM / Standard
SWD
Overall
Thickness
Stran
d
Thic
knes
s
LWO
SWO
Stran
d
Width
LWD
1/2”
1/2”
.051
27
4 x 8
.50
1.20
.375
.937
.051
.093
.158
24
10
65
.081
44
4 x 8
.50
1.20
.375
.937
.081
.096
.186
24
10
60
3/4”
3/4”
3/4”
3/4”
.051
17
4 x 8
.92
2.00
.812
1.750
.051
.109
.200
13
6
78
.081 (L)
32
4 x 8
.92
2.00
.750
1.680
.081
.129
.220
13
6
76
.081 (H)
41
4 x 8
.92
2.00
.750
1.680
.081
.165
.300
13
6
69
.125
65
4 x 8
.92
2.00
.687
1.680
.125
.169
.305
13
6
68
11/2” .081
11/2” .125
22
4 x 8
1.33
3.00
1.187
2.500
.081
.128
.240
9
4
85
43
4 x 8
1.33
3.00
1.187
2.500
.125
.162
.300
9
4
79
5.33
.94
3.44
.250
.387
.730
9
2.25
48
Above material conforms to Military Specification MIL-M-17999B (MR) Class I.
ALUMINUM EXPANDED GRATING
2.0
200
5 x 12
1.33
STAINLESS STEEL TYPE 304 / Standard
1/4”
#18
119
4 x 8
.26
1.00
.130
.630
.050
.076
.135
48
12
45
1/2”
1/2”
1/2”
#18
73
4 x 8
.50
1.20
.437
.937
.050
.087
.164
24
10
70
#16
91
4 x 8
.50
1.20
.437
.937
.062
.087
.164
24
10
70
#13
187
4 x 8
.50
1.20
.325
.875
.093
.119
.225
24
10
70
3/4”
3/4”
3/4”
3/4”
#18
48
4 x 8
.92
2.00
.812
1.750
.050
.106
.202
13
6
85
#16
60
4 x 8
.92
2.00
.812
1.750
.062
.106
.202
13
6
85
#13
91
4 x 8
.92
2.00
.750
1.687
.093
.107
.202
13
6
80
#9(10 ga.)
205
4 x 8
.92
2.00
.687
1.562
.140
.160
.300
13
6
67
45
4 x 8
1.33
3.00
1.250
2.750
.062
.115
.222
9
4
85
11/2” #13
68
4 x 8
1.33
3.00
1.250
2.625
.093
.115
.222
9
4
83
11/2” #9(10 ga.)
137
4 x 8
1.33
3.00
1.125
2.500
.140
.155
.280
9
4
77
11/2” #16
ALUMINUM / Flattened
LWO
SWD
SWO
Strand
Width
Strand
Thickness
(Overall
Thickness)
1/2”
1/2”
.051F
26
4 x 8
.50
1.270
.312
1.000
.040
.104
.040
24
9.5
61
.081F
42
4 x 8
.50
1.270
.312
1.000
.060
.105
.060
24
9.5
58
3/4”
3/4”
3/4”
3/4”
.051F
16
4 x 8
.92
2.125
.750
1.812
.040
.122
.040
13
5.7
72
.080F (L)
30
4 x 8
.92
2.125
.750
1.750
.070
.143
.070
13
5.7
70
.081F (H)
39
4 x 8
.92
2.125
.687
1.750
.070
.181
.070
13
5.7
63
.125F
62
4 x 8
.92
2.125
.625
1.750
.095
.187
.095
13
5.7
62
11/2” .081F
11/2” .125F
21
4 x 8
1.33
3.150
1.062
2.750
.055
.143
.055
9
3.8
77
41
4 x 8
1.33
3.150
1.000
2.750
.080
.181
.080
9
3.8
70
Above material conforms to Military Specification MIL-M-17999B (MR) Class II
STAINLESS STEEL TYPE 304 / Flattened
LWD
1/4”
#18F
111
4 x 8
.26
1.00
.110
.710
.046
.080
.046
48
11.6
40
1/2”
1/2”
1/2”
#18F
69
4 x 8
.50
1.26
.312
1.000
.040
.098
.040
24
9.5
60
#16F
86
4 x 8
.50
1.26
.312
1.000
.050
.099
.050
24
9.5
60
#13F
178
4 x 8
.50
1.26
.240
.915
.080
.132
.080
24
9.5
57
3/4”
3/4”
3/4”
3/4”
#18F
46
4 x 8
.92
2.10
.750
1.812
.040
.118
.040
13
5.7
75
#16F
57
4 x 8
.92
2.10
.750
1.812
.050
.118
.050
13
5.7
75
#13F
86
4 x 8
.92
2.10
.625
1.750
.070
.120
.070
13
5.7
75
#9F(10 ga.)
195
4 x 8
.92
2.10
.562
1.687
.119
.165
.119
13
5.7
61
11/2” #16F
11/2” #13F
11/2” #9F(10 ga.)
43
4 x 8
1.33
3.15
1.062
2.750
.050
.128
.050
9
3.8
80
65
4 x 8
1.33
3.15
1.000
2.625
.079
.130
.079
9
3.8
80
131
4 x 8
1.33
3.15
.937
2.625
.119
.165
.119
9
3.8
75
WE OFFER 24 HOUR SERVICE.
FOR NIGHT & WEEKEND SERVICE CALL:
LAFAYETTE 337.837.4381
–
29 –
ALUMINUM & STAINLESS, INC.
Galvanic Series of Metals and Alloys
CORRODED END (anodic, or least noble)
DIRECTION OF ATTACK
DIRECTION OF ATTACK
Magnesium
Magnesium Alloys
Titanium (active)
Zinc
Galvanized Steel
Aluminum
Aluminum Alloys
Cadmium
Steel or Iron
Cast Iron
Chromium-Iron (active)
18-8 Stainless Steel (active)
18-8-3 Stainless Steel (Moly add) (active)
Carpenter 20-CB-3 (active)
Lead
Tin
Nickel (active)
Inconel (active)
Brass
Copper
Bronze
70-30 Cupro Nickel
Silver Solder
Monel
Nickel (passive)
Inconel (passive)
Titanium (passive)
18-8 Stainless Steel (passive)
18-8-3 Stainless Steel (Moly added) (passive)
Carpenter 20-CB-3 (passive)
Silver
Graphite
Zirconium
Gold
Platinum
Galvanic Corrosion
A fluid line can act just like a galvanic cell when two dissimilar
metals in electrical contact are joined by a liquid capable of carrying an electric current. Because of the chemical reaction between
one of the metals and the electrolyte, electrons flow from the less
noble metal (anode) to the more noble metal (cathode). The voltage between the metals varies with different combinations, but
is always the same between any two given metals in the same
electrolyte.
One metal in a galvanic system always corrodes in preference
to the other. This relationship is shown for a number of metals.
The best way to avoid galvanic corrosion is to use the same
type of Stainless Steel for various parts of a system having a common electrolyte. For example, valve and pump parts in contact
with the fluid should be of the same analysis as the tubing or pipe.
At the same time, a sharp lookout should be kept for galvanic
combinations which often go unrecognized. Dissimilar metals
may appear in the ground, in bearings and shafts, or may even be
present in the process fluid as impurities.
PROTECTED END (cathodic, most noble)
1
2
Stainless is “active” in the presence of any combination of chemicals which are reducing and do not allow the formation of an oxide film.
A “passive” condition is obtained when the surface of a stainless part has developed a protective oxide film. Treating Stainless Steels in a passivating solution will accelerate the formation of the film.
– 30 –
ALUMINUM AND STAINLESS, INC.
A Reliance Steel & Aluminum Co.
P O Box 3484, Lafayette, LA 70502
101 Thru-Way Park Road, Broussard, LA 70518
(337) 837-4381 or Toll Free (800) 252-9074 Fax (337) 837-5439
CREDIT APPLICATION AND AGREEMENT
Legal Name __________________________________________________________________________________________________________________
Doing Business as
Billing Address
Street / P.O. Box
City
State
Zip Code
City
State
Zip Code
Street / Delivery Address
Street
Telephone
Facsimile
___
E-Mail Address _____________
S.I.C. Code
___
Dun & Bradstreet No.
State Resale Certificate No.
___
Fed. Tax I.D. No.
Parish Resale Certificate No.
___
Corporation 
LLC 
Partnership 
Individual Proprietorship 
If Corporation, State of Incorporation
Date of Incorporation
___
Related Companies
Relationship
___
Type of Business
Date Established
___
Purchasing Contact
Payables Contact
___
Number of Employees
Established Annual Sales
___
Required Monthly Credit Line
Purchase Ordered Required
Contractors’ License No./State __________________________
License Certification
 Yes  No
___
Owners or Officers
Name
S.S.N.
Title
Home Address
Name
S.S.N.
Title
Home Address
Name
S.S.N.
Title
Home Address
Does the business, or any principal, have any outstanding liens or judgments against them?  Yes  No
If yes, detail:
___________________________________________________________________________________________________________.
Has the business, or any principal, ever declared bankruptcy?  Yes  No
If so, date filed: ____________________________.
Credit References
Name
Telephone Number
FAX Number
______________________________________________________________________________________________________________
Name
Telephone Number
FAX Number
Bank References
Name
Bank Address / Telephone Number
Account Nos.
Name
Bank Address / Telephone Number
Account Nos.
Page 1 of 2
Page 1 of 2
PLEASE READ AND SIGN AGREEMENTS, TERMS AND CONDITIONS ON REVERSE SIDE.
PLEASE READ
AND
SIGN AGREEMENTS,
TERMS ANDWITH
CONDITIONS
ON REVERSE SIDE.
PLEASE
FURNISH
FINANCIAL STATEMENT
THIS APPLICATION.
PLEASE FURNISH FINANCIAL STATEMENT WITH THIS APPLICATION.
AGREEMENTS, TERMS AND CONDITIONS
1.
CUSTOMER’S ACCEPTANCE OF TERMS: Aluminum and Stainless, Inc. shall hereinafter be referred to as “ASI”, and the applicant shall be referred to as “CUSTOMER.” The CUSTOMER desires to
purchase goods and/or services from ASI, and CUSTOMER agrees in consideration thereof to be bound by the terms and conditions stated in this agreement. ASI hereby objects to any terms or
conditions at variance with, different from or additional to those terms and conditions stated herein unless such terms and conditions are hereafter set forth in a writing signed by ASI. Anything herein
to the contrary notwithstanding, no amendment to, or waiver, modification or deletion of, any of the terms and conditions stated herein shall be deemed effective unless any such amendment, waiver,
modification or deletion, as the case may be, shall have been approved and accepted in writing by an officer of ASI.
2.
THE OPEN CREDIT ACCOUNT: ASI reserves the right to approve, approve with conditions or disapprove any request for extension of credit in its sole discretion. The amount of credit extended to
CUSTOMER will be determined by ASI and may vary from time to time. CUSTOMER waives notice of any change in CUSTOMER'S credit limit. All amounts charged to the open account are CUSTOMER'S
responsibility. CUSTOMER agrees to pay any and all invoices, charges, fees and costs which CUSTOMER or any authorized person incurs on CUSTOMER’s account. Unless CUSTOMER notifies ASI in
writing within five (5) days of any unauthorized use of CUSTOMER’s credit account, CUSTOMER agrees that any other person who incurs charges on CUSTOMER’s account is authorized to do so.
Notwithstanding the foregoing, any and all contracts, certificates, invoices and other writings signed on behalf of CUSTOMER by any employee of CUSTOMER shall be deemed to have been executed on
behalf of CUSTOMER with full authority.
3.
OPEN ACCOUNT PAYMENT TERMS: All sums owing ASI by CUSTOMER shall be paid in accordance with the terms and conditions expressed on any written quotation signed by ASI and
CUSTOMER, or on ASI‘s invoice. In the absence of such express terms and conditions, ASI’s terms for CUSTOMER will be Net 30 days. CUSTOMER agrees to notify ASI in writing, of any error in any
invoice within ten (10) days after the date of that invoice. If not so noticed, the invoice shall be deemed to be correct, and accepted as rendered.
4.
CUSTOMER’S REPRESENTATIONS: Credit will be extended by ASI to CUSTOMER based on the information provided in this application. CUSTOMER agrees that any financial documents provided
ASI are true and correct, and will provide ASI such documents, from time to time upon request. CUSTOMER represents to ASI that it is solvent as of the date of this agreement, and that any Financial
Statement attached accurately reflects the present financial condition of CUSTOMER as of the date of this agreement. ASI is authorized to check CUSTOMER’s credit background.
5.
DEFAULT: Failure to make timely payment as provided in paragraph 3 above shall result in all charges on the account being deemed past due. Whether or not expressed in any quotation or
invoice, all sums past due shall bear an interest charge at the rate of one and one-half percent (1.5%) per month until paid in full. In addition, CUSTOMER agrees to reimburse and pay ASI for all
expenses, costs, and attorney’s fees (including in-house counsel fees) incurred or expended by ASI in enforcing any of its rights hereunder and/or collecting any past due sums, whether or not suit is
commenced.
6.
PURCHASE ORDERS: Issuance of a purchase order by CUSTOMER shall be deemed an acceptance of ASI'S terms and conditions contained herein, notwithstanding anything to the contrary in
CUSTOMER'S purchase order documents. CUSTOMER acknowledges and agrees that issuance of a purchase order creates no burden on the part of ASI to verify its accuracy or validity, and goods or
services that are provided to CUSTOMER pursuant to a purchase order shall be the full responsibility and obligation of the CUSTOMER.
7.
SHORTAGES AND/OR DEFECTIVE OR DAMAGED GOODS: Any alleged shortages and/or defective or damaged goods received by CUSTOMER in connection herewith must be reported in writing by
CUSTOMER to ASI within 5 days after delivery of said goods. Delivery of goods shall be subject to normal variations in weight, color, size, quantities, etc., as are standard in the trade. After such 5-day
period, CUSTOMER shall be deemed to have irrevocably accepted the goods, if not previously accepted. After such acceptance, CUSTOMER shall have no right to reject the goods for any reason or to
revoke acceptance. CUSTOMER hereby agrees that such 5-day period is a reasonable amount of time for such inspection and revocation.
8.
CANCELLATION AND RETURNS: CUSTOMER may not cancel any order of goods without ASI’s express, written consent. Any cancellation so authorized shall be subject to a cancellation charge of
15% at ASI’s sole discretion. Unused goods, processed material or specially manufactured materials not normally carried in ASI’s inventory may not, under any circumstances, be returned. The amount
of credit, if any, allowed to CUSTOMER for returned goods shall be at the sole discretion of ASI.
9.
GOVERNING LAW AND VENUE: Customer agrees that for and in consideration of ASI’s extension of credit, this agreement is to be construed under the laws of the State of Louisiana, and that if
legal action is brought to enforce this agreement, that Lafayette, Louisiana, shall be the exclusive jurisdiction and legal venue for said action, unless ASI initiates said legal action concurrently against
other parties to enforce statutory remedies (such as mechanic’s lien, stop notices, payment bonds, etc.) in connection with a debt incurred by CUSTOMER; in such case, the jurisdiction and legal venue
will be determined by the requirements of the Louisiana law.
10.
ASSIGNMENT: No right or interest in this agreement shall be assigned by CUSTOMER without the written permission of ASI, and no delegation of any obligation owed or of the performance of
any obligation by CUSTOMER shall be made without written permission of ASI.
11.
SEVERABILITY: If any term, covenant or condition of this agreement, or the application thereof to any person or circumstance, shall, to any extent, be invalid or unenforceable, the remainder of
this agreement or the application of such term, covenant or condition to persons or circumstances other than those as to which it is held invalid or unenforceable, shall not be affected thereby, and each
term, covenant or condition of this agreement shall be valid and shall be enforced to the fullest extent permitted by law.
12.
NON-WAIVER BY ASI: No waiver of any term, provision or other condition of this agreement by ASI, whether by conduct or otherwise, in any one or more instances, shall be deemed or construed
as a further or continuing waiver of any such term, provision or condition or as a waiver of any other term, provision or condition of this agreement.
13.
ACCEPTANCE / ENFORCEABILITY OF COPIES: CUSTOMER agrees that ASI may, at ASI’s sole discretion, accept, utilize and rely upon a facsimile copy or photocopy of this agreement and the
foregoing Continuing Personal Guaranty or Corporate Guaranty, in lieu of an original document. CUSTOMER acknowledges that, by transmitting a facsimile copy, electronic copy or photocopy of this
document to ASI, CUSTOMER, and the Guarantor (if applicable), agree to be bound by the terms and conditions contained in this document to the same extent as if an original were transmitted to ASI.
CUSTOMER, and Guarantor (if applicable), consent to ASI’s use of this document and waive any right to object to the use of a copy in place of the original and any right to require Seller to subsequently
produce an original document. This Credit Application and Agreement cannot be altered, amended, revised, or otherwise modified unless an officer of ASI provides prior written consent thereto.
THE UNDERSIGNED CERTIFIES THAT THE INFORMATION FURNISHED IN THIS APPLICATION IS TRUE AND CORRECT, AND THAT THE UNDERSIGNED HAS READ AND AGREED TO ALL THE TERMS
AND CONDITIONS OF THIS AGREEMENT NOTED ON THE FRONT AND REVERSE PAGES OF THIS APPLICATION. O F F I C E R , A U T H O R I Z E D A G E N T O R O W N E R S I G N A T U R E I S
RE QUI RED .
Signature of Owner/Officer/Authorized Agent
Print Name/Title
Date
CONTINUING PERSONAL GUARANTY
In consideration of the extension of credit to CUSTOMER by ASI and as an inducement to ASI to continue to extend credit to said CUSTOMER, the undersigned (hereinafter
“GUARANTORS”) jointly and severally, unconditionally guaranty the payment of any and all sums of money as are now, or at any time hereafter may be owing to ASI by said CUSTOMER, as a result of
ASI’s extension of credit, including attorneys’ fees and costs which may be incurred by ASI to enforce this Guaranty and / or to enforce its claims against CUSTOMER.
GUARANTORS agree to hold ASI harmless from any loss, damage, and expenses caused or arising out of default on the part of CUSTOMER. ASI may proceed against GUARANTORS without
being required to first proceed against the CUSTOMER, and ASI may proceed against any one of the GUARANTORS without waiving its rights to proceed against any of the remaining GUARANTORS.
GUARANTORS waive notice of the following: extension of time or modification of terms, settlements or resolutions of disputes, modification of credit line and default of CUSTOMER.
This is intended to be and is a Continuing Guaranty and shall not be revoked except by written notice to ASI not to make any further sales and deliveries on the security of this Guaranty
and until the expiration of five (5) days after such notice shall have been received by ASI at the following address: P O Box 3484, Lafayette LA 70502 by certified mail, return receipt requested. Any
such revocation shall be effective only with respect to merchandise shipped or delivered after the expiration of said five (5) day period, and shall not affect, in any respect, liability incurred by
Guarantors prior to that time.
The undersigned, and each of them, agree(s) to be bound by all terms and conditions contained in this Credit Application and Agreement and in the invoices issued hereunder which are
incorporated by this reference as though fully set forth in full.
GUARANTOR # 1:
Guarantor’s Signature
Print Name
S.S.N.
Date
Print Name
S.S.N.
Date
GUARANTOR #2:
Guarantor’s Signature
Page 2 of 2
Page 2 of 2