Intel® Visual Compute Accelerator (Intel® VCA) Quick Start Guide

VCA
Intel — VISUAL COMPUTE ACCELERATOR
QUICK START GUIDE
Overview
The Intel® Visual Compute Accelerator
(Intel VCA) is a PCIe* add-in card designed to
accelerate media and graphics workloads. The
card is a full-length, full-height, double-width
x16 card, which will fit into most 2U rack-mount
servers and some custom 1U rack-mount servers. Contact the OEM to ensure the card is supported for the given server system.
The card contains three Intel® Xeon® E3 processors and supports up to 32 GB of DDR3 memory per CPU — 96 GB total per card.
All information provided here is subject to change without notice.
Contact your Intel representative to obtain the latest Intel product specifications and roadmaps.
No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.
Copies of documents that have an order number and are referenced in
this document may be obtained by calling 1-800-548-4725 or by
visiting Intel’s website at http://www.intel.com/design/literature.htm.
Intel and the Intel logo are trademarks or registered trademarks of Intel
Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2015 Intel Corporation. All rights reserved.
2
Regulatory information
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference
received including interference that may
cause undesired operation.
Certification marks
20
3
Safety information
EN
Important safety instructions
Read all caution and safety statements in this
document before performing any of the
instructions. See Intel® Server Boards and
Server Chassis Safety Information at:
http://www.intel.com/support/motherboards/
server/sb/cs-010770.htm.
DE
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warn- und
Sicherheitshinweise in diesem Dokument,
bevor Sie eine der Anweisungen ausführen.
Beachten Sie hierzu auch die
Sicherheitshinweise zu Intel®-Serverplatinen
und -Servergehäusen unter:
http://www.intel.com/support/de/
motherboards/server/sb/cs-010770.htm.
ES
Instrucciones de seguridad importantes
Lea todas las declaraciones de seguridad y
precaución de este documento antes de
realizar cualquiera de las instrucciones. Vea
Intel® Server Boards and Server Chassis Safety
Information en: http://www.intel.com/support/
sp/motherboards/server/sb/cs-010770.htm.
4
FR
Consignes de sécurité
Lisez attention toutes les consignes de
sécurité et les mises en garde indiquées dans
ce document avant de suivre toute instruction.
Consultez Intel® Server Boards and Server
Chassis Safety Information rendez-vous sur le
site: http://www.intel.com/support/fr/
motherboards/server/sb/cs-010770.htm.
ZH-CN 䟽㾱ᆹ‫ޘ‬ᤷሬ
൘ᢗ㹼ԫօᤷԔѻࡽˈ䈧䰵䈫ᵜ᮷ԦѝⲴᡰᴹ
⌘᜿һ亩৺ᆹ‫ޘ‬༠᰾DŽᒦ৲䰵
http://www.intel.com/support/cn/
motherboards/server/sb/cs-010770.htm кⲴ
,QWHOϟ6HUYHU%RDUGVDQG6HUYHU&KDVVLV
6DIHW\,QIRUPDWLRQ ˄lj,QWHOϟᴽ࣑ಘѫᶯо
ᴽ࣑ಘᵪ㇡ᆹ‫ؑޘ‬᚟NJ˅DŽ
5
Warning
Electrostatic discharge (ESD) protection: ESD
can damage disk drives, boards, and other
parts. We recommend that you perform all of
these procedures at an ESD workstation. If an
ESD workstation is not available, provide some
ESD protection by wearing an antistatic wrist
strap attached to any unpainted metal surface
on your server’s chassis ground whenever handling parts.
Kit contents
• Intel VCA card
• Cosmetic cover
• This Quick Start Guide
Note: No cables are included in the kit. You
will need to order cabling separately.
6
Hardware install
1. The Intel VCA card supports up to two
slots of memory (8 GB and 16 GB) per CPU,
for a total of 96 GB maximum (32 GB per
CPU). The Intel VCA card ships with the
cosmetic cover uninstalled. If you want to
change the memory configuration, install
DDR3 ECC SODIMM modules (Figure 1).
Figure 1 Install memory
install memory
AF006969
7
2. Place the cosmetic cover over the card
(Figure 2).
Figure 2 Place cover over the card
AF006970
8
3. Slide the cover a half-inch (11 to 12 mm)
to the left to lock it in place (Figure 3).
Figure 3 Slide the cover a half-inch to the side
AF006971
9
4. Tighten the screw (Figure 4).
Figure 4 Tighten the screw
AF006972
10
5. Install the Intel VCA into an x16 PCIe*
add-in card slot (Figure 5).
Figure 5 Install Intel VCA
A
C
r
blanemove
k pa
nels
B
PCIe*
connector
AF007019
11
6. Add auxiliary power to the card (Figure 6).
Figure 6 Auxiliary power
to motherboard
AF006973
7. If necessary, add custom duct to ensure
airflow is directed at the PCIe* card.
12
Software install
CentOS 7.1 is required on the host.
1. Copy the following files to the host:
– kernel-3.10.0_#kernel_build_
number#.VCA-1.x86_64.rpm
– daemon-vca-#vca_build_number#0.x86_64.rpm
– vcass-modules-3.10.0-#kernel_
build_number#.VCA#vca_build_number#-0.x86_64.rpm
– vca_baremetal_#vac_build_
number#.img
Note: You can download these files from
https://downloadcenter.intel.com or from
one of the links in the For more
information section at the end of this
document.
2. Update the kernel:
sudo yum -y localinstall
--disablerepo=* kernel-3*rpm
3. Install the daemon:
sudo yum -y localinstall
--disablerepo=* daemon-vca*rpm
4. Install the modules:
sudo yum -y localinstall
--disablerepo=* vcass-modules*rpm
13
5. Update boot to the new kernel:
sudo grub2-set-default 0
6. Reboot system: sudo reboot
– Boot image: vcactl boot vca_baremetal_XXX.img
– Check status: vcactl status
Note: Repeat until the status shows
net_device_ready for all nodes.
7. Verify connection to one node:
ssh root@172.31.1.1
Note: Password = vista1. For other nodes,
change the third octet in the IP address.
The booted image is not persistent by default.
Refer to the user guide for instructions on how
to make changes persistent across boots.
14
For more information
For more information on Intel VCA,
visit: www.intelserveredge.com/
intelvca.
For more information on media and
storage solutions from Intel, visit:
www.intelserveredge.com/
MediaandGraphics.
For technical documents, visit:
http://www.intel.com/support/GO/
visual-accelerator.
For the latest download, visit:
https://downloadcenter.intel.com/
product/87380.
For information and software
download of Intel® Media Server
Studio, visit:
https://software.intel.com/en-us/
intel-media-server-studio.
Please
recycle
15
H90575-001