V I S H AY I N T E R T E C H N O L O G Y, I N C .
Capacitors - Very Low DC Leakage of 0.005 CV
AND TEC
I
INNOVAT
O L OGY
TL3
N
HN
TANTALUM CAPACITORS
O
19
62-2012
Solid Tantalum Surface-Mount Capacitors
TANTAMOUNT®, Molded Case, Very Low DCL
KEY BENEFITS
•
•
•
•
•
•
•
•
•
DC leakage at 0.005 CV
Standard and low ESR options
Thermal shock
100 % surge current tested (B,C, D, and E
case sizes)
Improved reliability of 0.5 % / 1000 hours
Redundant tests on all cases
Automotive grade available
Voltage rating of 4 V to 50 V
Capacitance values of 0.1 µF to 470 µF
• Capacitance Tolerance: ± 10 %, ± 20 %
• Halogen-free
• Operating temperature range of - 55 °C
to + 125 °C
• Terminations: 100 % matte tin and tin/lead
• Standard EIA 535BAAC case sizes (A through E)
• Compliant to RoHS Directive 2011/65/EU
• Moisture sensitivity level 1
APPLICATIONS
•
•
•
•
•
•
•
Battery-operated equipment
Portable instrumentation
Tire pressure monitoring systems
Medical instruments
Local power supplies
Handheld instruments
Battery backup supplies
RESOURCES
• Datasheet: TL3 - http://www.vishay.com/doc?40154
• For technical questions contact tantalum@vishay.com
Note
* Pb containing terminations are not RoHS compliant, exemptions may apply
PRODUCT SHEET
1/2
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
VMN-PT0308-1202
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FEATURES
I
INNOVAT
TL3
O L OGY
TANTALUM CAPACITORS
HN
• Terminations: 100 % matte tin and tin/lead
• Molded case available in five case codes
VIS
H AY
I NVolume”
T E R T Eautomatic
C H N O L O G Y, I N C .
• Compatible
with
“High
pick and place equipment
AND TEC
N
• 100 % surge current tested (B, C, D and E case
O
sizes)
• Improved reliability: 0.50 %/1000 h, 85 °C,
rated voltage
• Standard EIA 535BAAC case size (A through E)
• DC leakage at 0.005 CV
19
62-2012
• Low ESR options
• Mounting: Surface mount
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
• Moisture sensitivity level 1
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
PERFORMANCE/ELECTRICAL CHARACTERISTICS
Capacitance Range: 0.1 µF to 470 µF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 4 V to 50 V
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C voltage derating is required)
ORDERING INFORMATION
TL3
D
107
K
010
C
0100
TYPE
CASE CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT + 85 °C
TERMINATION
AND PACKAGING
ESR
See Ratings
and Case
Codes table.
This is expressed
in picofarads. The
first two digits are
significant figures.
The third is the
number of zeros
to follow.
K = ± 10 %
M = ± 20 %
This is expressed in
volts. To complete
the three-digit block,
zeros precede the
voltage rating.
A decimal point is
indicated by an “R”
(6R3 = 6.3 V).
C = Matte tin/7"
(178 mm) reels
D = Matte tin/13"
(330 mm) reels
E = Tin/lead/7"
(178 mm) reels
F = Tin/lead/13"
(330 mm) reels
Maximum 100 kHz
ESR in mΩ.
See note below.
Notes
• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
• The EIA and CECC standards for low ESR solid tantalum chip capacitors, allow delta ESR of 1.25 times the datasheet limit after mounting.
• Dry pack is available per request, contact regional marketing.
DIMENSIONS in inches [millimeters]
L
TW
W
H
TH (MIN.)
P
CASE CODE
A
B
C
D
E
EIA SIZE
L
0.126 ± 0.008
3216-18
[3.2 ± 0.20]
0.138 ± 0.008
3528-21
[3.5 ± 0.20]
0.236 ± 0.012
6032-28
[6.0 ± 0.30]
0.287 ± 0.012
7343-31
[7.3 ± 0.30]
www.vishay.com
0.287 ± 0.012
7343-43
[7.3 ± 0.30]
W
0.063 ± 0.008
[1.6 ± 0.20]
0.110 ± 0.008
[2.8 ± 0.20]
0.126 ± 0.012
[3.2 ± 0.30]
0.169 ± 0.012
[4.3 ± 0.30]
0.169 ± 0.012
[4.3 ± 0.30]
H
0.063 ± 0.008
[1.6 ± 0.20]
0.075 ± 0.008
[1.9 ± 0.20]
0.098 ± 0.012
[2.5 ± 0.30]
0.110 ± 0.012
[2.8 ± 0.30]
0.157 ± 0.012
[4.0 ± 0.30]
P
0.031 ± 0.012
[0.80 ± 0.30]
0.031 ± 0.012
[0.80 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
TW
0.047 ± 0.004
[1.2 ± 0.10]
0.087 ± 0.004
[2.2 ± 0.10]
0.087 ± 0.004
[2.2 ± 0.10]
0.094 ± 0.004
[2.4 ± 0.10]
0.094 ± 0.004
[2.4 ± 0.10]
TH (MIN.)
0.028
[0.70]
0.028
[0.70]
0.039
[1.0]
0.039
[1.0]
0.039
[1.0]
TL3
Vishay Sprague
Revision: 01-Feb-12
Document Number: 40154
1
For technical questions, contact: tantalum@vishay.com
“A” CASE VOLTAGE CODE
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
Indicates Very Low DCL Series
ARE SUBJECT TO SPECIFIC VOLTS
DISCLAIMERS, SET FORTH
AT www.vishay.com/doc?91000
CODE
Indicates Very Low DCL Series
MARKING
4.0
Capacitance Code, pF
V 104D
Polarity Band (+)
Voltage
Code
A Case
Revision 01-Feb-12
Capacitors - Very Low DC Leakage of 0.005 CV
Solid Tantalum Surface Mount Capacitors
TANTAMOUNT®, Molded Case, Very Low DCL
6.3
J
10
A
16
C
20
D
25
E
35
V
50
T
Voltage
Capacitance μF
G
Polarity
Band (+)
22
D10
XX
2
Date Code
Vishay
Sprague Logo
B, C, D, E Cases
Marking
Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” case capacitors use a letter
code for the voltage and EIA capacitance code.
The Vishay Sprague® trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V.
A manufacturing date code is marked on all capacitors.
Call the factory for further explanation.
STANDARD RATINGS
PRODUCT SHEET
2/2
VMN-PT0308-1202
MAX. RIPPLE
MAX. DC
MAX. DF
MAX. ESR
100 kHz
LEAKAGE
AT + 25 °C
AT + 25 °C
CASE CODE
PART NUMBER
IRMS
AT + 25 °C
120 Hz
100 kHz
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED
HEREIN
AND
THIS
DOCUMENT
ARE
SUBJECT TO
(A)
(μA)
(%)
()
CAPACITANCE
(μF)
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
2.2
A
4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C
TL3A225(1)004(2)7600
0.25
6
7.600
0.10