Integrated Solutions
Simple and flexible designs for space and time savings
TM
Save up to 40% wall space!
Integrated Power Center 2 (IPC2)
The Integrated Power Center 2 (IPC2) transformer combo was the first member of the IPC2 family of
Square D™ products offered by Integrated Power and Control Solutions (IPaCS). Ideally suited for projects
having both 480 Y/277 V and 208 Y/120 V requirements, its efficient, space-saving design means big value.
I-Line Combo Panelboard
The Square D I-Line™ Combo Panelboard combines an I-Line power section with NQ or NF lighting sections
in one panelboard. This innovative design saves space and installation time, while providing the rugged
capabilities you have trusted for decades.
The IPC2 transformer combo and I-Line Combo Panelboard decreases electrical room space requirements
by 40 percent or more. This integrated approach also means less conduit, fittings, and feeder cables, which
dramatically improves on-site installation time and material costs. IPC2 units are factory inspected and
tested, then packaged and shipped as a single unit, which saves valuable installation time! This is a simple
and flexible solution that is right for your job site.
I-Line Combo Panelboard
Integrated Power Center 2 (IPC2)
Standards
UL® 67: Panelboard standard requirements
UL 891: Switchboard standard requirements
Connection to included section
Hard-bussed connection
Cabled connection between products
Single voltage throughout structure
Multiple voltages available throughout structure
600Y/347 maximum
Transformer: 300 kVA max.
Factory-assembled
Factory-assembled and prewired
Features
Voltage Configuration
Availability
Enclosure Type
Mounting
Dimensions
Ready-to-install
NEMA® Type 1, 3R, 4/4X, 5 and 1
2 panelboard platform
Wall-mounted
NEMA Type 1 (available with optional driphood)
and 3R switchboard platform
Free-standing
26” W x 86” H x 9.5” D
Std W: 24”, 30”, 36”, 42”, and 48”
32” W x 73” H x 9.5 D
Std H: 91.5”
32” W x 91” H x 9.5” D
Std D: 24” and 36”
44” W x 86” H x 9.5” D
Maximum Amperage Range
Control Capabilities Availability
Main Lug: 800 Amps
Main Lug: 1,200 Amps
Main Breaker:1,200 Amps
Main Breaker: 1,200 Amps
Yes
Yes
• Lighting contactors (optional)
• Lighting contactors
• Building management systems
Surge Protection Availability
Metering and
Monitoring Availability
Applications
2
Yes
Yes
Yes
Yes
• Communication capabilities (H/J/L/P/R-Frame
PowerPact™ with Micrologic™ breakers)
• Communication capabilities (H/J/L/P/R-Frame
PowerPact with Micrologic breakers)
Retail
• PM’s, CM’s, BCM’s, EM4800’s
Retail
Commercial Buildings
Commercial Buildings
Industrial
Industrial
Healthcare
Healthcare
Datacenters
Datacenters
Office/Banks
Office/Banks
Integrated Power Center 2
(IPC2) Transformer Combo
Efficient design saves time and handling costs.
The Integrated
Power Center
2 (IPC2)
transformer
combo is
shipped as an
integrated system
to dramatically
reduce installation
time and materialhandling costs.
Integrated Power Center 2
(IPC2) transformer combo
Reduced floor and wall space required
•P
anels are stacked above a transformer, reducing
the overall footprint and saving valuable floor and
wall space.
Reduced on-site installation
labor required
•P
anels and transformer are factory mounted,
assembled, and cabled in a single enclosure,
which means installation can take hours rather
than days.
•C
ontractor labor risk is minimized due to reduced
installation hours.
Reduced material costs and handling
•S
olution requires fewer items to receive, inventory,
retrieve, and install.
•W
iring between the internal components of
Complies with NEC
and UL requirements
• The IPC2 transformer combo is designed and
manufactured to comply with National Electric
Code® (NEC) and UL requirements.
• The IPC2 transformer combo is seismically
certified to ICC ES AC156 seismic testing protocol
• Electrical distribution equipment is factory
assembled and tested in a controlled factory
environment, ensuring the highest quality
standards are met.
Top and bottom conduit entry/exit
space available
• The stand-alone IPC2 transformer combo provides
the flexibility to enter and/or exit the section from
either the top or bottom, saving installation time
and materials.
the section (transformers, panels, individually
mounted circuit breakers, contactors) is done at
the factory, saving labor and eliminating conduit,
wire, and fittings.
3
Typical small project installation comparison
Stick-built
electrical equipment
IPC2 transformer combo
Stick-BuiltFront
Electrical
Equipment
elevation
elevationCombo
IPC2 Front
Transformer
Front Elevation
Front Elevation
42"
~80"
NF
NQ
NF
NQ
36"
Transformer
NF
Transformer
NQ
Transformer
NEC
Clearance
NEC
Clearance
NEC Clearance
Requirement
NEC Clearance
Requirement
Footprint
Footprint
Additional savings
4
Stick-built
Transformer combo
Savings realized
Estimated labor hours
26 – 32
3–6
23 – 26
Materials used
Associated pipe,
wire, and fittings
N/A
Associated pipe,
wire, and fittings
Number of pieces handled
20 – 30
1
19 – 29
Installing an
IPC2 transformer
combo reduces
the required wall
space (below)
and floor space
(left) by 40
percent or more
when compared
to a traditional
stick-built
electrical room.
Standard merchandise configurations*
Catalog No. IPC2TC-1EE
Catalog No. IPC2TC-2EE
42"
42"
42"
42"
80123-029-01
80258-668-03
80258-669-03
80258-511-04
NQ
NF
91 21 "
91.5"
NF Panel
NF Panel
480/277 V
3 Ph 4 W
225/3 MB
18 k AIC
1 – 125/3 (Transformer)
39 – 1PSO
Copper Bus
Ground Bus
SUSE
480/277 V
3 Ph 4 W
400 A MLO
18 k AIC
1 – 125/3 (Transformer)
39 – 1PSO
Copper Bus
Ground Bus
SUSE
EE75T3H
NQ
NF
91 21 "
91.5"
NQ Panel
208 Y/120 V
225/3 MB
42 – 1PSO
Copper Bus
Ground Bus
80123-029-01
80258-668-03
80258-669-03
80258-511-04
NQ Panel
208 Y/120 V
225/3 MB
42 – 1PSO
Copper Bus
Ground Bus
3 Ph 4 W
10 k AIC
EE75T3H
Transformer
Transformer
Type EE (Energy Efficient)
480 V – 208 Y/120 V
75 kVA
150 ˚C Temp. Rise
Aluminum Windings
6 – 2.5% Taps; 2+ 4-
24"
24"
Type EE (Energy Efficient)
480 V – 208 Y/120 V
75 kVA
150 ˚C Temp. Rise
Aluminum Windings
6 – 2.5% Taps; 2+ 4-
3 Ph
24"
24"
Estimated Weight
Estimated Weight
1,150 lb.
1,150 lb.
Catalog No. IPC2TC-3EE
42"
42"
NQ Panel
80123-029-01
80258-668-03
80258-669-03
80258-511-04
NQ
208 Y/120 V
225/3 MB
42 – 1PSO
Copper Bus
Ground Bus
FT Lugs
NF Panel
3 Ph 4 W
10 k AIC
80123-029-01
80258-668-03
80258-669-03
80258-511-04
EE75T3H
208 Y/120 V
225 A MLO
42 – 1PSO
Copper Bus
Ground Bus
3 Ph 4 W
10 k AIC
Type EE (Energy Efficient)
480 V – 208 Y/120 V
75 kVA
150 ˚C Temp. Rise
Aluminum Windings
6 – 2.5% Taps; 2+ 4-
Estimated Weight
1,125 lb.
480/277 V
3 Ph 4 W
400 A MLO
18 k AIC
1 – 175/3 (Transformer)
30 – 1PSO
Copper Bus
Ground Bus
SUSE
NQ Panel
91 21 "
91.5"
EE112T3H
Transformer
24"
24"
NQ
NF
NQ Panel
1
91 2 "
91.5"
3 Ph
Catalog No. IPC2TC-4EE
42"
42"
NQ
3 Ph 4 W
10 k AIC
208 Y/120 V
400/3 MB
42 – 1PSO
Copper Bus
Ground Bus
3 Ph 4 W
10 k AIC
Transformer
3 Ph
24"
24"
Type EE (Energy Efficient)
480 V – 208 Y/120 V
112.5 kVA
150 ˚C Temp. Rise
Aluminum Windings
6 – 2.5% Taps; 2+ 4-
3 Ph
Estimated Weight
1,385 lb.
*All selections can be fed from top or bottom.
5
Catalog No. IPC2TC-5EE
Catalog No. IPC2TC-6EE
48"
48"
42"
42"
NF Panel
80123-029-01
80258-668-03
80258-669-03
80258-511-04
NQ
NF
91 21 "
91.5"
NF Panel
480/277 V
3 Ph 4 W
400/3 MB
18 k AIC
1 – 125 / 3 (Transformer)
27 – 1PSO
Copper Bus
Ground Bus
SUSE
EE75T3H
80123-029-01
NF
NQ
NQ
1
NQ Panel
208 Y/120 V
225 / 3 MB
42 – 1PSO
Copper Bus
Ground Bus
80258-668-03
80258-669-03
80258-511-04
NQ Panel
91 2 "
91.5"
3 Ph 4 W
10 k AIC
EE75T3H
Transformer
24"
24"
Estimated Weight
Estimated Weight
1,160 lb.
1,300 lb.
1
NQ
80123-029-01
80258-668-03
80258-669-03
80258-511-04
EE45T3H
24"
24"
NF Panel
NF Panel
480/277 V
3 Ph 4 W
125 A MLO
18 k AIC
1 – 60/3 (Transformer)
15 – 1PSO
Copper Bus
Ground Bus
SUSE
NF
480/277 V
3 Ph 4 W
125 A MLO
18 k AIC
1 – 40/3 (Transformer)
15 – 1PSO
Copper Bus
Ground Bus
SUSE
NQ
NQ Panel
NQ Panel
208 Y/120 V
125/3 MB
12 – 1PSO
Copper Bus
Ground Bus
91 21 "
91.5"
3 Ph 4 W
10 k AIC
80123-029-01
80258-668-03
80258-669-03
80258-511-04
EE30T3H
Transformer
24"
24"
6
3 Ph
Catalog No. IPC2TC-8EE
24"
24"
91 2 "
91.5"
3 Ph 4 W
10 k AIC
Type EE (Energy Efficient)
480 V – 208 Y/120 V
75 kVA
150 ˚C Temp. Rise
Aluminum Windings
6 – 2.5% Taps; 2+ 4-
3 Ph
Catalog No. IPC2TC-7EE
NF
208 Y / 120 V
225/3 MB
84 – 1PSO Total
Copper Bus
Ground Bus
Transformer
Type EE (Energy Efficient)
480 V – 208 Y/120 V
75 kVA
150 ˚C Temp. Rise
Aluminum Windings
6 – 2.5% Taps; 2+ 4-
24"
24"
480 / 277 V
3 Ph 4 W
225 / 3 MB
18 k AIC
1 – 125/3 (Transformer)
39 – 1PSO
Copper Bus
Ground Bus
SUSE
Type EE (Energy Efficient)
480 V – 208 Y/120 V
45 kVA
150 ˚C Temp. Rise
Aluminum Windings
6 – 2.5% Taps; 2+ 4-
208 Y/120 V
100/3 MB
15 – 1PSO
Copper Bus
Ground Bus
3 Ph 4 W
10 k AIC
Transformer
3 Ph
24"
24"
Type EE (Energy Efficient)
480 V – 208 Y/120 V
30 kVA
150 ˚C Temp. Rise
Aluminum Windings
6 – 2.5% Taps; 2+ 4-
Estimated Weight
Estimated Weight
900 lb.
800 lb.
3 Ph
I-Line Combo Panelboard
Efficient design saves time and space.
Two NQ or two NF Panelboards
I-Line Panelboard
Reduced floor and wall space required
Manage costs
• The innovative I-Line Combo Panelboard offers
• By combining the lighting sections with the I-Line
a Square D NQ or NF lighting section in the
same enclosure as an I-Line power section,
which requires up to 40 percent less space than
traditional, multiple boxes.
Less installation time and
materials costs
• Instead of installing multiple panelboards at one
site, reduce installation time by installing ONE
I-Line Combo Panelboard.
• Decrease material costs by only having to cable
one enclosure.
The I-Line Combo
Panelboard offers
a smart, spacesaving design for
fast installation and
a smaller footprint,
all with the proven
reliability trusted
for decades.
power section in one enclosure, costs can be further
reduced by using smaller and more cost-effective
breakers in the NQ or NF lighting sections.
Flexible Configurations
• Single enclosure is available in 26- or 32-inch widths
• Duplex enclosure is available in 32- or
44-inch widths.
• I-Line Combo Duplex Panelboard has two
hard-bussed lighting sections. An optional
mounting space section is available that provides
space for field-installable components.
Meets/complies with UL requirements
• The I-Line Combo Panelboard is built to
the same UL Listed 67 standard as other
Square D panelboards.
7
This innovative design requires up to 40 percent less space than a traditional I-Line
and NF or NQ lighting panelboard configuration. Whether it is a brand-new site or
a project requiring an electrical distribution update, the I-Line Combo Panelboard
seamlessly integrates to offer a simple, flexible, and innovative solution.
NQ or NF
I-Line Panelboard
26", 32", 42," or 44" wide
One or Two 20” W
NF or NQ Panels
100A-800A MLO/MCB
~30"
I-Line
26", 32," or 44" wide
The Square D brand is an integral part of the Schneider Electric™ portfolio.
As the global specialist in energy management, we deliver proven reliability,
expertise, and comprehensive solutions.
Additional IPC2 configurations are available based on your customer’s specific requirements.
For information on space-saving products, contact 888-SQUARED, ask your authorized
Schneider Electric Distributor, or visit www.schneider-electric.com/us
Schneider Electric USA
1415 S. Roselle Road
Palatine, IL 60067
Tel: 847-397-2600
Fax: 847-925-7500
www.schneider-electric.com/us
Document Number 2230BR1303
September 2013
©2013 Schneider Electric. All Rights Reserved. Schneider Electric, Square D, I-Line, PowerPact, Micrologic, and The global specialist in energy management are
trademarks owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are the property of their respective owners. 998-1191532_US
I-Line Combo
Panelboard solution
Classic solution