VPK Specification Sheet - Precision

advertisement
VPK
LED Parking Garage Vaportight Retrofit
Product Information
Project Name
Type
Catalog Number
Date
SPECIFICATIONS
Features
• Retrofit existing fluorescent vaportight luminaires with state-of-the-art low wattage high lumen LED.
• Fast pace upgrade with little clean-up and no removal of existing fixture.
• 1. Open lens and remove existing lamps, gear tray and clips 2. Install new
clips and wire up the LED gear tray. 3. Install new lens and go!
• Wide distribution works well in low mounting height applications.
• To meet certifications ensure existing fixture matches dimensions shown.
• Hose down & wet location fixture is IP67 rated (Sensored units are IP65 rated).
• Frosted deep diffuser ensures visual comfort for drivers.
• Very tough diffuser resists breakage and reduces replacement and maintenance costs.
• LED light engine eliminates risk of glass breakage in parking garages.
• Instant re-start, no warm-up times or reduced light output in cold environments.
• Choice of two lumen packages and three dimming options available.
• Long-life LEDs at L80 (80% lumen maintenance) at 60,000 hours reduce life cycle maintenance costs.
• Available in 4’ and 8’ lengths.
• Up to 99 lumens per watt.
• Color Rendering Index (CRI) > 80.
• Designed to retrofit existing SLP housing.
• Made In USA. Meets ARRA & Buy American requirements.
Construction
Certifications
• Conversion kit includes pre-wired LED engine assembly, white gear tray
with retainer clips, frosted diffuser and polycarbonate latches
• Deep diffuser is made with flame retardant 5VA (f1) fire rated materials
• Certain airborne contaminants can diminish integrity of acrylic. Consult factory
for chemical compatibility.
• Stainless steel tamper resistant screws, order separately, (8) or (14) required.
• Secure locking plastic latches standard
• Weight: 1x4 - 6 lbs. 1x8 - 15 lbs.
•
•
•
• Please refer to the Lighting Facts website for specific
product qualifications at www.lightingfacts.com.
Application
•
•
Electrical
•
•
•
•
•
•
•
•
•
•
•
UL 1598, 1598C & 8750 classified and cUL for Canada.
Emergency-equipped fixtures labeled UL 924.
Adheres to LM79, LM80 and TM21 industry standards.
Input Voltage Range: 100/277 VAC Nom. (90-305 V Min/Max)
Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max)
Active Power Factor Correction
Power Factor: >0.90 @ full load, 100V through 277V
Inrush Current: 60 Amps max @ 230 VAC, cold start 25ºC
Harmonic Distortion: THD < 20% @ full load
Protection: Over-Voltage, Over-Temperature (110º) & Short Circuit with self-recovery
Compliant to FCC Part 15 requirements for EMI/RFI emissions
NEC/CEC compliant ballast disconnect is standard
Optional surge protection: ANSI Std. C62.41.2 Category A (10 kV)
Optional emergency battery pack
Suitable for use with most wired or wireless lighting control systems
Suitable for wet locations:
• Parking garages
• Livestock buildings
• Under awnings
• Car washes
• Low-bay
Warranty
• Five-year warranty. (Terms and Conditions Apply)
CERTIFICATION
IP65
IP66
IP67
CERTIFIED
CERTIFIED
CERTIFIED
ORDERING INFORMATION
–
MODEL
VPK LED Parking
Garage
Vaportight
Retrofit
–
SIZE
1x4 1x4
Nominal
1x8 1x8
Nominal
(non
DLC)
EXAMPLE VPK-1X4-LW-F-DFA-UL-40K
–
LUMEN
OUTPUT
LW Low
HL High
–
DRIVER
OUTPUT
F Fixed
DM 0-10v
Dimming1
–
SHIELDING
DFA Deep
Frosted
Acrylic
DCA Deep Clear
Acrylic
–
DRIVER
VOLTAGE
UL Universal
120/277
VAC
–
COLOR
TEMP
40K 4000
50K 5000
OTHER
LSP Lighting
Surge
Protector
(270 Joules)
EB Emergency
Battery
Backup
JP Job Pack
ACCESSORIES
(ORDER SEPARATELY)
Stainless Steel Tamper Order Part: #95011778
(8 or 14 Required)
Resistant Screws
FOOTNOTES
1. Must be used in conjunction with lighting controls.
Page 1/3 - Revised: 07/01/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves
the right to change specifications without notice. Telephone [Midwest] 715.381.2971 / Website www.P-2.com
VPK
LED Parking Garage Vaportight Retrofit
PHOTOMETRIC DATA
PHOTOMETRIC DATA: VPK-1X4-LW-F-UL-40K
All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP certified lab.
LUMINAIRE DATA
Luminaire
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing Criterion
Luminous Opening
in feet
Test: L04134339
Test Date: 04/17/13
INDOOR CANDELA PLOT
ZONAL LUMEN SUMMARY
90
VPK-1X4-LW-F-UL-40K
LED Parking Garage
Vaportight Retrofit
D310CQ50UNVA-A
1.00
LED
5052
51
Suspended & Ceiling
N/A
0° = 1.22 90° = 1.20
Length: 4.29
Width: 0.54
Height: 0.29
70
60
819
AVG. LUMINANCE (Candela/Sq. M.)
50
1092
0
10
20
70
30
117
88
70
58
49
42
36
32
28
26
23
10
117
83
63
50
41
34
29
25
22
20
18
70
113
98
86
77
70
64
59
54
50
47
44
7
15
25
52
80
91
30
40
Average Luminance Angle
RCR
50
117
95
79
68
59
52
46
42
38
34
32
%Fixt
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
546
80
70
117
101
90
81
73
67
61
57
53
49
46
%Lamp
332
734
1271
2624
4054
4588
80
COEFFICIENTS OF UTILIZATION (%)
RC
Lumens
0-20
0-30
0-40
0-60
0-80
0-90
273
0.0 _____ 40.0 _ _ _ _ 90.0 _ _ _ _
RW
0
1
2
3
4
5
6
7
8
9
10
Zone
50
113
91
77
66
57
50
45
40
37
33
31
50
30
113
86
68
56
47
41
35
31
28
25
23
10
113
80
62
49
40
33
29
25
22
19
17
50
106
85
71
61
53
47
42
38
34
32
29
30
106
80
64
53
45
39
34
30
27
24
22
0
10
106
76
59
47
38
32
28
24
21
19
17
0
91
65
50
40
32
27
23
20
17
15
14
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
0.0
22.5
45.0
67.5
90.0
881
875
862
841
812
775
731
679
621
558
492
425
368
302
236
331
150
104
881
876
865
849
828
803
772
736
695
652
607
561
521
475
429
377
320
258
881
880
877
876
875
871
869
866
860
851
842
829
815
793
762
712
641
541
881
882
888
900
914
935
957
977
995
1008
1017
1024
1027
1016
981
928
856
745
881
883
892
908
930
960
990
1018
1042
1060
1074
1087
1092
1076
1038
988
918
812
RCR = Room Cavity Ratio RC = Effective Ceiling Cavity Reflectance RW = Wall Reflectance
OPERATING ENVIRONMENT
Proposed
System
Min
Temp
Max
Temp
VPK-LW
-30°C/-22°F
45°C/113°F
VPK-HL
-30°C/-22°F
35°C/95°F
Application Notes
1. Application temperatures are provided to ensure the longevity and performance of the driver and LEDs.
2. Results are based off the In-Situ Temperature Measurement Test (ISTMT)
along with the drivers' temperature and life curves.
3. Optional emergency battery equipped units have a minimum temperature of 10°C.
4. Precision-Paragon [P2]'s 5 year warranty assumes operation at the maximum ambient temperature range.
LUMEN PACKAGE OPTIONS
4000K DETAILS*
Proposed
System
Lumen
Output
CRI
VPK-1X4-LW
VPK-1X4-HL
VPK-1X8-LW
VPK-1X8-HL
LW
HL
LW
HL
>80
>80
>80
>80
5000K DETAILS**
CCT
Lumens
Per Fixture
Input
Watts
Lumens
Per Watt
4000K
4000K
4000K
4000K
5052
8322
10105
16643
51
90
102
181
99
92
99
92
CCT
Lumens
Per Fixture
Input
Watts
Lumens
Per Watt
5000K
5000K
5000K
5000K
5153
8488
10307
16976
52
92
104
185
99
92
99
92
*Lumen values shown are initial delivered lumens tested at 25°C per IES LM-79 standards.
**Lumen values calculated with 1.02 multiplier based on LED manufacturer data.
Page 2/3 - Revised: 07/01/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves
the right to change specifications without notice. Telephone [Midwest] 715.381.2971 / Website www.P-2.com
VPK
LED Parking Garage Vaportight Retrofit
FIXTURE DIMENSIONS
*Drawings N.T.S.
TAMPER RESISTANT LATCHES
PLASTIC LATCHES: TAMPER RESISTANT SCREWS
(ORDER SEPARATELY)
PART #95011778
NOTES:
*Torx screwdriver required for tamper resistant screws.
*Screws Required: 1x4 = 8 or 1x8 = 14
*Images N.T.S.
SCREW - #6 LENGTH - .62"
Page 3/3 - Revised: 07/01/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves
the right to change specifications without notice. Telephone [Midwest] 715.381.2971 / Website www.P-2.com
Download