Experts in paperforming
Paper plate presses
SMP
Inmaco BV
Hoogeveen, Netherlands
www.inmaco.nl
sales@inmaco.nl
 Fast and versatile
 Single or multiple die
 Blank and roll feeding
Paper plates and board trays:
....Inmaco supplies the cardboard forming press for every design and size of paper plate and for
almost every production requirement. You may choose between our machines working from pre-cut
blanks, or from reel.
The SMP models of paper plate presses are servo-mechanically driven. Due to this modern
technology the SMP-presses offer a maximum in flexibility and ease of operation. Press speed, dwell
time, opening speed and -time, stroke length and temperature are independently adjustable.
Adjustments are made through the operator panel with color display.
The mechanical drive system ensures clean production, no risk of leaking hydraulics.
Single or multiple tooling.
The SMP400 is a single tool press, the machine is equipped with only one tool at the time, each
stroke of the machine delivers one single product.
The larger models SMP700 and SMP1000 can be equipped with large single tools, or 2 or more
smaller tools side by side.
The SMP700 can have up to 3 dies, the SMP1000 can even have up to 5 dies side by side.
The dies are installed on a manifold plate, enabling easy tool change of the complete set, or
allowing to change only one tool. The heated tools are separated from direct contact with the
manifold by high resistant insulation plates.
Blanks or reel
The blanks from which the products are formed, must be pre-cut, and creased if required, on a
separate cutting machine. You may choose a blank fed SMP for reasons such as the available
printing technology, the flexibility in relation to order volumes, or the lower investment.
Pre-cut blanks can be processed on our blank fed -presses SMP400, SMP700 or SMP1000.
A vacuum feeding system takes the blanks one by one from the magazine, then they are rollerfed into the forming die.
Refilling of the magazine can be accomplished during running production without stop, on a
height convenient for the operator..
For larger production volumes
Inmaco offers the SMP700R and
SMP1000R, working from reel. The
machines have an integrated cutting
and creasing unit.
The electronically controlled paper
feed provides precise cutting
position of both preprinted and
plain cardboard. Volume of cut-off
waste is reduced to a minimum by
staggered cutting pattern. Cutting
and pre-creasing of blanks is
performed by means of low cost
steel rule dies which are easy to realign.
Inmaco’s SMP-presses are designed to combine dependability, quick and easy size-changes and
high productivity. Inmaco has supplied hundreds of presses to customers in all the world, and
these have proven their reliability since decades.
Tooling
Additionally to the presses, Inmaco offers a
wide variety of high quality cutting and
forming tools designed and manufactured
with most modern equipment and based on
our experience of more than fifty years.
Each tooling part (top and bottom) has its
own heating and heating control. The special
temperature control system allows to use
high temperatures on the cardboard side of
the blank, limiting the heat on the coated
side of the blank.
Productivity
All SMP-presses are designed to produce trays with a depth of up to 55 mm.
The speed of the machines is up to 56 strokes/minute (tray Ø 200 x 20 mm deep), depending on
quality and caliper of board, as well as on design of product and required quality level.
All size-parts for cutting and forming are easily accessible and changing from one plate-design or
size to another requires from less then an hour for the SMP400 to up to 2 hours only for the
large machines with multiple dies.
Every SMP-Press combines high productivity and minimum of manpower requirement to provide
maximum of efficiency and profitability, also for small and medium orders and short production
runs.
An automatic counting and piling device comes as standard on all SMP. The device will collect the
products in piles of preset numbers and present them on a roller table for inspection, further
processing or packing.
Inmaco - SMP-presses: a combination of solid construction and high precision engineering to give
excellent reliability and excellent product quality for many years of production.
Laminating
The SMP700R and SMP1000R can be equipped with a laminating unit. This option offers the
possibility to produce plates and trays from a lower grade board and cover it with a plastic or
paper layer to provide a barrier against leakage of liquid or grease.
Technical data
Servo-mechanical press
SMP400
Blank fed Single cavity forming tools
Working from
Blanks
Blank size mm
Max. Ø 400 or 400 x 400
Drawing depth mm
55
Speed
60 max. strokes/min.
Pressforce kN
60
Board caliper gsm
250 - 1000
Power consumption
10 kWh
Floor space mm
2500 x 1100
Servo-mechanical press
SMP700
SMP1000
Multi cavity forming tools
Working from
Blanks
Blanks
Blank size mm
Single die max. Ø510 or 700 x 510
Double die max. Ø340 or 340 x 510
Triple die max. Ø220 or 220 x 510
(Option)
Single die max. Ø510 or 1000 x 510
Double die max. Ø490 or 490 x 510
Triple die max. Ø320 or 320 x 510
Four dies max. Ø240 or 240 x 510
(Option)
Five dies max. Ø190 or 190 x 510
(Option)
Drawing depth mm
55
55
Speed
56 max. strokes/min.
56 max. strokes/min.
Pressforce kN
100
150
Board caliper gsm
250 - 1000
250 - 1000
Power consumption
13 kWh
13 kWh
Floor space mm
5500 x 1400
5500 x 1700
Servo-mechanical press
SMP700-R
SMP1000-R
Multi cavity forming tools
Working from
Reel
Reel
Blank size
Single die max. Ø510 or 700 x 510
Double die max. Ø340 or 340 x 510
Triple die max. Ø220 or 220 x 510
(Option)
Single die max. Ø510 or 1000 x 510
Double die max. Ø490 or 490 x 510
Triple die max. Ø320 or 320 x 510
Four dies max. Ø240 or 240 x 510
(Option)
Five dies max. Ø190 or 190 x 510
(Option)
Drawing depth
55 mm max.
55 mm
Speed
56 max. strokes/min.
56 max. strokes/min.
Press force kN
100
150
Board caliper gsm
250-600
250-600
Power consumption
16 kWh
25 kWh
Floor space mm
07-05-2102
8500 x 1400
8500 x 1700