iQ-PH
Phase Controlled Driver
The iQ-PH is an ideal Constant Voltage
electronic dimmable power supply for interior or
exterior linear LED applications. It is capable of
providing full-range 0-100% flicker-free dimming
using either forward or reverse phase dimmers.
Available in 60W at 12VDC or 80W at 24VDC
and is UL Listed and Class II Rated.
Driver Features
TOP VIEW
.86"
▪ Wide Dimmer compatibility-supports most phase type
dimmers in the market ( See chart below )
▪ Forward Phase and Reverse Phase Dimmer control or on/off
▪ Integral wiring compartments for reduced installation costs
▪ Forward or Reverse Phase Dimming
▪ Completely potted design, no venting required
▪ Energy Star Compliant
▪ Active Power Factor Correction, PF>0.9
▪ Built-in protection:
SCP ( Short Circuit Protection ),
OTP ( Over Temperature Protection ),
OVP ( Over Voltage Protection ),
OCP ( Over Current Protection )
▪ Operating temperature Range: -40 to +60°C
(-40 to +140 °F)
▪ Constant Voltage
.86"
.86"
.86"
1.73"
SIDE VIEW
14.40"
13.54"
9.29"
8.11"
7.72"
H
Hot
V+
Red
100%
Class 2 Power Supply
2.93"
3.30"
3.94"
4.49"
4.88"
N
Neutral
AC INPUT
Tested To Comply
With FCC Standards
0%
A.C.Phase Dimmable
3.40"
V-
Black
G
Ground
Model: IQ-PH-80-120/24
Input : 100-120V AC 60Hz 1.1A
Output: 3.33A / 24V DC
Tc
Temp : -40oF ~ 140oF
Factory ID: TS WWYY
24V DC OUTPUT
DIMMABLE LED DRIVER
Powered By
WARNING:
Risk of Electric Shock.
Mount the unit at a height greater than 1 foot from the ground surface. Made In China
4LZ3
E479456
LED DRIVER
NOTE: The LED drivers provide a constant voltage output for operating LED systems requiring 12V or 24V DC
OUTPUT
MODEL #
100-120VAC
INPUT
CHANNEL
OUTPUT
VOUT
(VDC)
Loading Current (w/
dimmer)per Channel (A)
Loading Current (w/out
dimmer)per Channel (A)
MIN
MAX
MIN
MAX
MAX
RATED
OUTPUT
OUTPUT
POWER
POWER
PER
CHANNEL
MAX
(W)
iQ-PH-60-120/12
1
12
2.28
5.00
0.33
5.00
60
60
iQ-PH-80-120/24
1
24
1.16
3.30
0.17
3.30
79.2
80
© 2016, Q-Tran Inc. 155 Hill St. Milford, CT 06460.All rights reserved-P: 203-367-8777-F: 203-367-8771-E: sales@q-tran.com - www.q-tran.com
SUPPORTED DIMMER LIST
90~120V AC ELV (Reverse phase) & Triac (Forward phase) Dimmer
Brand
Dimmer Rating Power
(max)
Model
LED Flicker Free Test *
Lutron
DVCL-153PL (C/L)
600W
Pass
Lutron
TGCL-153P (C/L)
600W
Pass
Lutron
AB-600M-WH (Abella)
600W
Pass (##)
Lutron
D-600RH-DK (Rotary)
600W
Pass
Lutron
D-600R-WH (Rotary)
600W
Pass
Lutron
D-603PG-WH (Rotary)
600W
Pass
Lutron
GL-603PH-DK (GLYDER-3-way)
600W
Pass
Lutron
GL-600-WH (Glyder)
600W
Pass (##)
Lutron
MA-600GH-WH
(Ecodim Digital with indicator leds)
500W
Pass (##)
Lutron
MIR-600THW-WH (RC Digital Fade Dimmer)
600W
Pass
Lutron
MS-VP600GHW-WH
(Vacancy Sensor w/eco-dim Dimmer)
600W
Pass (##)
Lutron
600W
Pass
SELV-300PH-WH (SKYLARK-Single Pole)
300W
Pass
TG-600PH-WH (Toggler)
600W
Pass
600W
Pass
TT-300NLH-BL
600W
Pass
RI061-A (Rotary Dimmer w/ Non-Present)
600W
Pass
S-600PH-WH (SKYLARK))
Lutron
Lutron
Lutron
TG-603PFH-WH (Toggler-eco-dim)
Lutron
Cooper Wiring Devices
Cooper Wiring Devices
6001
Cooper Wiring Devices
Cooper Wiring Devices
600W
Pass
SLC03P (C/L)
600W
Pass
SI06P (non C/L)
600W
Pass
GE
DI61-271
600W
Pass
GE
DIB61-71
600W
Pass
GE
DIT61-71
600W
Pass
GE
DIT61-S71
600W
Pass
Legrand
V8051
600W
Pass
NOTE: ● ## -5-100% dimming range.
● Flicker tests were carried out to ensure full range, flicker-free dimming from min to full load.
● This is a representative list of dimmers only. Q-Tran makes no specific recommendation on product selection and there are no warranties of performance
or compatibility implied. Refer to dimmer manufacturers for further information on LED compatibility. Lutron and their product brand names are registered
brand names are registered trademarks.
WIRE LENGTH TABLE
TOTAL LENGTH
VDC
12
24
WATTS
(W)
10 AWG
(5.6mm2)
12 AWG
(3.3mm2)
14 AWG
(2.0mm2)
16 AWG
(1.3mm2)
12
25
60
631’
231’
14’
397’
145’
9’
250’
91’
6’
157’
57’
99’
36’
62’
23’
39’
14’
25’
9’
15’
6’
17
25
40
80
1795’
1134’
619’
261’
1129’
713’
389’
164’
710’
449’
245’
103’
446’
282’
154’
65’
281’
177’
97’
41’
177’
112’
61’
26’
111’
70’
38’
16’
70’
44’
24’
10’
44’
28’
15’
6’
*Distances are based on a 5% Voltage drop max.
● This product must be installed in accordance with the applicable installation code by a
person familiar with the construction and operation of the product and the hazards involved.
18 AWG 20 AWG
22 AWG 24 AWG
(0.78mm2) (0.50mm2) (0.33mm2) (0.20mm2)
RoHS
2011/95/EU
IP65
26 AWG
(0.13mm2)
4LZ3
Tested To Comply
E479456
With FCC Standards LED DRIVER
© 2016, Q-Tran Inc. 155 Hill St. Milford, CT 06460.All rights reserved - P: 203-367-8777- F: 203-367-8771- E: sales@q-tran.com - www.q-tran.com
iQ-PH: SPECIFICATIONS
SPECIFICATIONS
Input
▪ Voltage ( RMS )
▪ Frequency ( Hz )
▪ Power Factor
Output
▪ Line Regulation ( % )
▪ Load Regulation ( % )
Min
Nom
Max
100
47
120
50/60
0.9
----
130
63
-10
-------
10
----
Environmental
▪ Storage Temperature ( °C )
▪ Operating Temperature ( °C )
▪ Relative Humidity ( % )
▪ MTBF ( Hours @ 25°C ( 77°F ), Full Load )
----
5
-------------
-40
-40
5
80,000
85
60
95
----
Protections
▪ Short Circuit Protection ( SCP )
: Hiccup-Mode, Auto-Recovery upon
removal of short
▪ Over Voltage Protection ( OVP )
: 105% of Voltage (typ) Min
▪ Over Current Protection ( OCP )
: Hiccup-Mode
▪ Over Temperature Protection ( OTP ) : Shutdown with Auto-Recovery
Lifetime
Expected Lifetime
▪ Lifetime ( Hours )
65°C
75°C
Compliance / Safety
▪ EMI / RFI
50,000
30,000
: ISPR-22 Class B
: FCC part 15 Class B
: EN55015, EMC
▪ Safety
: UL 1012, 1310 Class 2, 8750, 879
: CSA C22.2 NO. 107.1
: CE (IEC/EN61347-1,
IEC/EN61347-2-13)
▪ IP Rating
DERATING CURVE
OUTPUT VOLTAGE vs. LOAD
Load (%)
120
Output Voltage (V)
100
12.5
80
12
60
11.5
40
11
20
10.5
0
-40
: 65
13
-20
0
20
40
Operating Temperature (ºC)
60
80
10
iQ-PH-60-120/12
0
20
40
60
80
100
Load (%)
© 2016, Q-Tran Inc. 155 Hill St. Milford, CT 06460.All rights reserved-P: 2 0 3 - 367-8777-F: 2 0 3 -367-8771-E: sales@q-tran.com - www.q-tran.com
INSTALLATION
Unscrew the covers
GND
NEU
LED
120V AC
HOT
24V DC
.86"
.86"
.86"
The conduit coming in the
wiring primary compartment
.86"
12 Screws to hold the
driver onto the surface
The wiring coming out on
the secondary side
4 4INPUT
INPUTWiring
Wiring Options
Options
LEDTape Light : Wire lead
can be trimmed to length as
needed
1
Knockout
Knockout
3
.86"
.86"
4
.86"
.86"
4
.27"
.27"
.55"
2
#0674 FT. Q-TRAN RIP STRIPTM P/N 988182M
44OUTPUT
OUTPUTWiring
Wiring
Options
Options
1
3
_ Negative
+ Positive
Washer
.55
2
Washer
© 2016, Q-Tran Inc. 155 Hill St. Milford, CT 06460.All rights reserved-P: 203-367-8777-F: 203-367-8771-E: sales@q-tran.com -www.q-tran.com