I N F I N I T Y® K A P P A® S P E A K E R S
Looking for a more moving audio experience? Take Infinity®
car audio for a ride. Innovative materials and breakthrough
engineering have always put Infinity products out in front
of the competition’s. So expect extreme output from us. But be
prepared for accuracy and detail that may surprise you. The
Kappa line of premium loudspeakers – which incorporates the
very best in high-end design and proven technology – has long
been one of the world’s most recognized and admired.
multielements
New Kappa loudspeakers take car audio speaker technology to a
whole new level with features such as Plus One® (patent pending)
cones; true-four-ohm topology; UniPivot™ (patent no. 6,002,780)
edge-driven tweeters; and industry-leading mounting systems,
including Intermount III (patent no. 6,505,705) and I-Mount™
(patent no. 5,859,917), and the Starfish™ tweeter-mounting adapter.
With all this technology in a single speaker series, it’s no wonder
our competitors are scrambling to keep up.
For years, the design of upscale car audio speakers has been
loosely based on the design of at-home speaker systems, where
amplifiers are big and power is plentiful. The audio systems in new
cars are different. Almost all new systems include two-ohm
speakers and small, efficient amplifiers or head units designed
to drive them. Replacing those two-ohm factory speakers with
four-ohm models cuts the available power in half, and that’s
no upgrade. Kappa speakers are optimized for these new systems
and work beautifully with old-school aftermarket gear, too.
3 2 . 9 cf
42.9i
52.9i
62.9i
3-1/2" Two-Way Loudspeaker
Plus One® (patent pending)
woven-glass-fiber woofer cone
4" Two-Way Loudspeaker
5-1/4" Two-Way Loudspeaker
6-1/2" Two-Way Loudspeaker
Plus One (patent pending)
woven-glass-fiber woofer cone
Plus One (patent pending)
woven-glass-fiber woofer cone
Plus One® (patent pending)
woven-glass-fiber woofer cone
MMD®-dome tweeter
Edge-driven MMD®-dome tweeter
True 4-ohm
True 4-ohm
Edge-driven MMD®-dome tweeter
with UniPivot™ (patent no. 6,002,780)
Edge-driven MMD®-dome tweeter
with UniPivot™ (patent no. 6,002,780)
Direct-connect crossover dongle
®
®
Direct-connect crossover dongle
True 4-ohm
True 4-ohm
Impedance: 2 ohms
Tweeter-level adjustment on tweeter
Direct-connect crossover dongle
Direct-connect crossover dongle
Sensitivity: 92dB
Impedance: 2 ohms
Tweeter-level adjustment on tweeter
Tweeter-level adjustment on tweeter
Frequency response: 85Hz – 25kHz
Sensitivity: 93dB
Impedance: 2 ohms
Power handling, RMS: 35 watts
Frequency response: 75Hz – 25kHz
Sensitivity: 94dB
Intermount III (patent no. 6,505,705) woofer
mounting system
Power handling, Peak: 105 watts
Power handling, RMS: 50 watts
Frequency response: 55Hz – 25kHz
Impedance: 2 ohms
Power handling, Peak: 150 watts
Power handling, RMS: 55 watts
Sensitivity: 95dB
Power handling, Peak: 165 watts
Frequency response: 45Hz – 25kHz
Power handling, RMS: 75 watts
Power handling, Peak: 225 watts
multielements
62.9is
63.9i
652.9i
6-1/2" Two-Way Shallow
Mount Loudspeaker
6-1/2" Three-Way Loudspeaker
165mm Two-Way Loudspeaker
Plus One (patent pending)
woven-glass-fiber woofer cone
Plus One® (patent pending)
woven-glass-fiber woofer cone
MMD®-dome midrange and UHF tweeter
Plus One® (patent pending)
woven-glass-fiber woofer cone
®
Edge-driven MMD®-dome tweeter
Direct-connect crossover dongle
Edge-driven MMD®-dome tweeter with UniPivot™
(patent no. 6,002,780)
Direct-connect crossover dongle
Tweeter-level adjustment on tweeter
Direct-connect crossover dongle
Tweeter-level adjustment on tweeter
Impedance: 2 ohms
Tweeter-level adjustment on tweeter
Intermount III (patent no. 6,505,705) woofer
mounting system
Sensitivity: 95dB
Impedance: 2 ohms
Frequency response: 45Hz – 30kHz
Sensitivity: 95dB
Power handling, RMS: 75 watts
Frequency response: 45Hz – 25kHz
Power handling, Peak: 225 watts
Power handling, RMS: 75 watts
Impedance: 2 ohms
Sensitivity: 94dB
Frequency response: 45Hz – 25kHz
Power handling, Peak: 225 watts
Power handling, RMS: 65 watts
Power handling, Peak: 195 watts
Installation of Kappa speakers is easy, thanks to a new
crossover dongle, that is permanently connected to the
speaker’s terminals at the factory. No special tools or
U N I PI V OT
connectors are required to connect standard Kappa
speakers to the car’s wiring. Additionally, Kappa speakers
TO ENSURE
PROPER IMAGING
include frames designed to fit most factory speaker
locations without modification.
Kappa Series Speakers also include Plus One cone
TWEETER
LEVEL CONTROL
technology, which delivers a cone with more surface
area than competing models of the same size. This
increase can be as much as 30%, depending on the
individual speaker model. The benefit is increased
bass output and increased efficiency.
multielements
692.9i
693.9i
4 6 2 . 9 cf p
6 8 2 . 9 cf
6" x 9" Two-Way Loudspeaker
6" x 9" Three-Way Loudspeaker
4" x 6" Two-Way Plate Loudspeaker
6" x 8"/5" x 7" Two-Way Loudspeaker
Plus One® (patent pending)
woven-glass-fiber woofer cone
Plus One® (patent pending)
woven-glass-fiber woofer cone
Plus One® (patent pending)
woven-glass-fiber woofer cone
Plus One® (patent pending)
woven-glass-fiber woofer cone
Edge-driven MMD®-dome tweeter with
UniPivot™ (patent no. 6,002,780)
MMD®-dome midrange and UHF tweeter
Edge-driven MMD®-dome tweeter
Direct-connect crossover dongle
Direct-connect crossover dongle
Edge-driven MMD®-dome tweeter with
UniPivot™ (patent no. 6,002,780)
Direct-connect crossover dongle
Tweeter-level adjustment on tweeter
Tweeter-level adjustment on tweeter
Direct-connect crossover dongle
Tweeter-level adjustment on tweeter
Impedance: 2 ohms
Impedance: 2 ohms
Tweeter-level adjustment on tweeter
Impedance: 2 ohms
Sensitivity: 96dB
Sensitivity: 94dB
Impedance: 2 ohms
Sensitivity: 96dB
Frequency response: 35Hz – 30kHz
Frequency response: 75Hz – 25kHz
Sensitivity: 94dB
Frequency response: 35Hz – 25kHz
Power handling, RMS: 110 watts
Power handling, RMS: 60 watts
Frequency response: 40Hz – 25kHz
Power handling, RMS: 110 watts
Power handling, Peak: 330 watts
Power handling, Peak: 180 watts
Power handling, RMS: 100 watts
Power handling, Peak: 330 watts
Power handling, Peak: 300 watts
All Kappa Series speakers are “true
Other features – An ultra-wideband
four-ohm” – they include reduced
UHF soft-dome tweeter is used on the
voice-coil impedance designed to
component systems for accurate music
extract the most power possible from
reproduction from 25kHz up to 35kHz.
all amplifiers engineered to drive
loads of four ohms or less. Many
factory-installed systems incorporate
two-ohm speakers and include
amplifiers designed to drive those
loads. Replacing those reducedimpedance speakers with four-ohm
models is hardly an upgrade, since
the power output from the amplifier
will be reduced. True-four-ohm
addresses this as well.
Edge-driven-MMD® dome tweeters are
used. These are not commonly used
W-domes, but fully edge-driven-dome
tweeters like those found in better
home-audio speakers. The benefit is
increased power handling and reduced
distortion at high output levels.
A new ceramic woofer motor with a
much longer voice coil for drastically
reduced distortion at high listening
levels (up to 15dB less!) is used. This
results in a much tighter and better
sounding bass.
component
systems
5 0 . 9 cs
6 0 . 9 cs
6 8 0 . 9 cs
10 . 9 t
5-1/4" Two-Way
Component System
6-1/2" Two-Way
Component System
6" x 8"/5" x 7" Two-Way
Component System
1" Textile Tweeter
Plus One® (patent pending)
woven-glass-fiber woofer cone
Plus One® (patent pending)
woven-glass-fiber woofer cone
Plus One® (patent pending)
woven-glass-fiber woofer cone
I-Mount™ (patent no. 5,859,917)
tweeter kit with Starfish™ OEM adapter
Edge-driven MMD®-dome tweeter
Edge-driven MMD®-dome tweeter
Edge-driven MMD®-dome tweeter
Outboard passive crossover
with air core inductors and poly caps
Outboard passive crossover
with air core inductors and poly caps
Outboard passive crossover
with air core inductors and poly caps
Outboard passive crossover
with air core inductors and poly caps
I-Mount™ (patent no. 5,859,917)
tweeter kit with Starfish™ OEM adapter
I-Mount™ (patent no. 5,859,917)
tweeter kit with Starfish™ OEM adapter
I-Mount™ (patent no. 5,859,917)
tweeter kit with Starfish™ OEM adapter
Tweeter-level adjustment
Tweeter-level adjustment
Impedance: 2 ohms
Intermount III (patent no. 6,505,705)
woofer-mounting system
Sensitivity: 93dB
Tweeter-level adjustment
Sensitivity: 93dB
Frequency response: 55Hz – 25kHz
Impedance: 2 ohms
Frequency response: 45Hz – 25kHz
Power handling, RMS: 85 watts
Sensitivity: 95dB
Power handling, RMS: 90 watts
Power handling, Peak: 255 watts
Frequency response: 45Hz – 25kHz
Power handling, Peak: 270 watts
Impedance: 2 ohms
Edge-driven motor structure
Impedance: 2 ohms
Sensitivity: 93dB
Frequency response: 2.5Hz – 25kHz
Power handling, RMS: 50 watts
Power handling, Peak: 150 watts
with supplied crossover
Power handling, RMS: 90 watts
Power handling, Peak: 270 watts
250 Crossways
250 Crossways
Park Park
DriveDrive
Woodbury,
Woodbury,
NY 11797
NY 11797
USA USA
516.674.4INF
516.674.4INF
(4463)
(4463)
Fax 516.682.3556
Fax 516.682.3556
www.infinitysystems.com
www.infinitysystems.com
© 2008
© Harman
2008 Harman
International
International
Industries,
Industries,
Incorporated.
Incorporated.
Infinity,
Infinity,
Kappa Kappa,
Series, Plus
Plus One,
One, MMD
and and
MMDCMMD
are trademarks
are trademarks
All rights
All rights
reserved.
reserved.
Part No.
Part
INFBASSLINKPI3-08
No. INFKAPPASPKPI3-08
of Harman
of Harman
International
International
Industries,
Industries,
Incorporated,
Incorporated,
registered
Features,
Features,
specifications
specifications
and appearance
and appearance
are subject
are subject
to change
to changein theregistered
United States
in the
and/or
United
other
States
countries.
and/or other
T-Pole countries.
Motor,
without
without
notice.
notice.
Designed,
Designed,
editededited
and digitally
and digitally
produced
produced
by theby the I-Mount,
I-Mount,
SLI, UniPivot,
UniPivotEMIT,
and Starfish,
Starfish BassLink
are trademarks
T and of
Harman
Harman
Consumer
Consumer
GroupGroup
Marketing
Marketing
& Design
& Design
Center,
Center,
Woodbury,
Woodbury,
NY.
NY.
MultiMount
Harman
areInternational
trademarks of Industries,
Harman International
Incorporated.
Industries,
Incorporated.