176
54
117,80
125
20,50
21,40
HS-04
Thermal resistance
0.25 K/W
Material
Aluminium
HS-04 is suitable for use with laser
models 05-01:
Cobolt ZoukTM
Cobolt CalypsoTM
Cobolt SambaTM 117,80
Cobolt JiveTM
Cobolt FlamencoTM
Cobolt RumbaTM
75
This document must not be copied,either completely or in part, without our permission. Any
infringement will lead to legal proceedings.
Cobolt AB
Cobolt model number
-
176
20133
20129
C pinne CP 2x12 Tol h8 ISO 2338
12
4
4
80568
176 1
2
M6 (x4) 1
1
2
2
4
Front
Note:
1. This product must be comp
Excerpt from ISO 2768-m
125
20,50
0,5-6
(6)-30
(30)-120
(120)-400
(400)-1000
2013-10-01
G
125
M6 (x4)
20,50
0
0
Ph: +46854591230; Fax: +46854591231
www.cobolt.se
125
-
Cobolt AB
M6 (x4)
Vretenvägen
13 - 17154 Solna,
20,50 Sweden
±0,1
±0,2
±0,3
±0,5
±0,8
Date (YYYY-MM-DD)
75
Back
-
10
11
Default/QTY.
J
Screw MC6S M4x10-316
Screw MC6S M3x25-316
Screw MC6S M3 x 12
Nut M6M M3-316
Gable, fan
Heat sink side
Heatsink 150x102x32mm
Gable
Finger guard FG50
-
20140
20141
20060
20142
11571
11573
10378
11572
20134
H
Description
1
2
3
4
117,80 5
6
7
8
9
K
54
176 x 117.8 x 54
6.9 x NUMBER
4.6 x 2.1
PART
-
PSU is included
[mm]
[inches]
ITEM NO.
21,40
Dimensions
54
176
54
This document must not be copied,either completely or in part, without our permission. Any
infringement will lead to legal proceedings.
Cobolt AB
To ensure operation within given specifications and
for the warranty to be valid, the laser head must
be attached to a heatsink providing good thermal
resistance. This value is the difference between
the maximum operating laser base plate temperature (50˚C) and the maximum ambient temperature at the air-heatsink interface (40°C), divided by the maximum power dissipated from the
laser head (~50W). The mounting surface should
be flat (within 0.05 mm over mounting surface).
It is recommended to use a thermal heat compound between the laser head and the heatsink
to provide good thermal contact. The heatsink superceeds HS-02 and is designed to accommodate
all Cobolt laser model 05-01 Series footprints and
can be bolted to a standard metric optical table.
M6 (x4)
Specifications
Denna handling får ej utan vårt medgivande delges
annan, kopieras eller eljest obehörligen användas.
Överträdelse härav beivras med stöd av gällande lag.
Cobolt AB
HS-04
Heatsink with fan for
Cobolt 05-01 Series lasers
info@cobolt.se