SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS BLH Series Solventproof 105℃ 10,000Hrs assured. Vertical SMD type. Long Life. For LED MT/TV, AVN. RoHS compliant. Halogen-free capacitors are also available. SPECIFICATIONS BLA BLH Long Life Item Characteristics Rated Voltage Range Operating Temperature Range Capacitance Tolerance 10 ~ 50 V DC -40 ~ +105℃ ±20%(M) (at 20℃, 120Hz) I=0.01CV(μA) or 3 μA, whichever is greater. Where, I:Max. Leakage current(μA), C:Nominal capacitance(μ F), V:Rated voltage(VDC) (at 20℃, 2 minutes) Leakage Current Rated voltage(VDC) Dissipation Factor (Tan δ) Tan δ(Max.) 10 16 25 35 50 0.24 0.20 0.16 0.13 0.12 (at 20℃, 120Hz) Rated voltage(VDC) Temperature Characteristics (Max. Impedance ratio) 10 16 Z(-25℃)/Z(+20℃) 3 2 25~50 2 Z(-40℃)/Z(+20℃) 7 5 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 10,000 hours at 105℃. Load Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. Capacitance change Tan δ Leakage current Series Others ±30% of the initial value 300% of the initial specified value The initial specified value BLH Shelf Life Capacitance change Tan δ Leakage current ±30% of the initial value 300% of the initial specified value The initial specified value Satisfied characteristics KS C IEC 60384-4 RATED RIPPLE CURRENT MULTIPLIERS PART NUMBERING SYSTEM Frequency Multipliers BLH 16 VC 220 M H 10 TP With tape Case code Capacitance tolerance(±20%) Nominal capacitance code (ex. 0.1㎌:R1, 1.0㎌:1, 4.7㎌:4R7, 10㎌:10) Lead type Rated voltage Series name Freq.(㎐) Factor 120 1.00 1K 1.05 10K 1.08 100K 1.08 67 SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS DIMENSIONS OF BLH Series Unit(mm) DIMENSIONS MARKING BLH Case code Ø D L A B C H10 8 10 8.3 8.3 9.0 J10 10 10 10.3 10.3 11.0 K 1 4 12.5 13.5 13.0 13.0 13.7 Recommended solder land on PC board : Solder land on PC board RATINGS OF BLH Series VDC 10 μF 33 47 100 220 330 470 1,000 H10 J10 K14 16 170 254 472 H10 J10 J10 K14 25 140 238 254 472 H10 J10 J10 K14 35 116 218 238 324 H10 J10 J10 K14 50 92 151 216 301 H10 H10 J10 K14 Rated Ripple Current (mArms/105℃, 120Hz) Case code 68 77 92 151 255 W 0.7-1.1 0.7-1.1 1.0-1.3 P 3.1 4.5 4.2 a 3.1 4.5 4.0 b 4.2 4.4 5.7 c 2.2 2.2 2.5