STRONG GRIP® PLIERS

advertisement
NEW
PRODUCT
2016
Product Details
STRONG GRIP® PLIERS
The Easiest to GRIP, ADJUST, RELEASE.
Model PCH10 features
Hammer Head
Fast, easy
pressure
adjustment
Wire Cutter
Non-Slip Grip
Insert screwdriver for
greater torque
Hanging storage hole
Single-hand
release trigger
V-groove on
top jaw
No finger crimping!
Minimizes bar
pop-outs
Minimal handle spread
for easier gripping
Model PCH10 shown
Unique and Convenient!
C-Jaw Pliers with Hammer Head
Unique design provides a convenient hammer
when you need it, where you need it!
V-groove
C-Jaw Pliers
Machined curved jaws with serrated
teeth tightly grip round stock as well as
a variety of shapes.
Part No.
Opening
OAL
Weight
PCH10
1.5”
(40 mm)
12”
(300 mm)
1.4 lbs.
(0.6 kg)
Part No.
Opening
OAL
Weight
PCJ50
1”
(26 mm)
7”
(180 mm)
0.4 lb.
(0.2 kg)
PCJ70
1.6”
(40 mm)
9.6”
(245 mm)
0.8 lb.
(0.4 kg)
PCJ100
1.6”
(41 mm)
12”
(300 mm)
1.2 lbs.
(0.6 kg)
PCJ120*
2.2”
(55 mm)
14”
(360 mm)
2.0 lbs.
(0.9 kg)
* Unique larger size.
800.989.5244 | www.stronghandtools.com | sales@stronghandtools.com | Santa Fe Springs, CA 90670 U.S.A.
NEW
PRODUCT
2016
Product Details
Side Pull
Unique!
Dual Axis Pull Pliers with Hammer Head
An essential pulling, pushing, ramming tool for the diemaker, maintenance craftsman, and auto repair shop
mechanic. Pull Rod mounts in the swing handle, or in
the M10 threaded hole for 2-axis pulling or pushing.
V-groove
Part No.
Opening
OAL
Weight
PPD100
1.6”
(40 mm)
28”
(715 mm)
1.7 lbs.
(3.8 kg)
SELF ALIGNing pull bar
Unique!
Economy Pipe Pliers
Large Capacity (3”/75 mm)!
Holds round, square, flat
or angled. The large (1.5”
/ 38 mm dia. ) swivel pad
clamps at multiple angles.
U-Prong Pliers
Wide U-Shaped jaw for
workpiece visibility, weld
access, secure holding.
Sheet Metal Pliers
Wide, robust contact
plates for getting a firm
hold on sheet metal.
Long Nose Pliers
Long, slim nose for access
in tight, narrow, hard to
reach areas.
Part No.
Opening
Round / Square
OAL
Weight
PVS100
up to 3”
(75 mm)
14”
(360 mm)
2.2 lbs.
(1.0 kg)
Part No.
Opening
OAL
Weight
PUP90
2”
(50 mm)
11”
(275 mm)
1.3 lbs.
(0.6 kg)
PUP100
3”
(80 mm)
13.4”
(340 mm)
1.9 lbs.
(0.9 kg)
Part No.
Parallel
Opening
OAL
Weight
PDB80
0.4”
(10 mm)
10”
(250 mm)
1.2 lbs.
(0.5 kg)
PDB90
0.6”
(15 mm)
12.6”
(320 mm)
1.7 lbs.
(0.8 kg)
Part No.
Parallel
Opening
OAL
Weight
PLN50
0.2”
(5 mm)
8”
(205 mm)
0.4 lb.
(0.2 kg)
PLN90
0.2”
(6 mm)
10.6”
(270 mm)
0.9 lb.
(0.4 kg)
800.989.5244 | www.stronghandtools.com | sales@stronghandtools.com | Santa Fe Springs, CA 90670 U.S.A.
NEW
PRODUCT
2016
Product Details
Unique!
Pliers with Combo Tips
One round tip [for tight
spots] + swivel pad [for
larger surface contact].
Pliers with Round Tips
Greater clearance and
access for quick holding
in tight areas.
Pliers with Swivel Pads
Hold angled, or uneven
work pieces, without
damaging surfaces. Pads
pivot to align with the work
surface for a firm hold. Locking Chain Pliers
Clamp odd shaped
multiple items. Adjust
tighteness with crank
handle. Replaceable chain
available in 24”, 36”, and
48” lengths.
Part No.
Throat
Depth
Opening
OAL
Weight
PSR80
3”
(76 mm)
2.4”
(60 mm)
11.8”
(300 mm)
1.3 lbs.
(0.6 kg)
PSR100
3”
(76 mm)
2.8”
(70 mm)
14.2”
(360 mm)
1.8 lbs.
(0.8 kg)
PSR140
5.6”
(142 mm)
5”
(127 mm)
16.9”
(430 mm)
2.3 lbs.
(1.1 kg)
Part
No.
Throat
Depth
Opening
OAL
Weight
PRB60
1.7”
(42 mm)
1.9”
(48 mm)
7.6”
(192 mm)
0.6 lb.
(0.3 kg)
PRB80
3”
(76 mm)
2.4”
(60 mm)
11.4”
(290 mm)
1.2 lbs.
(0.6 kg)
PRB110
3”
(76 mm)
3”
(75 mm)
13.8”
(350 mm)
1.9 lbs.
(0.9 kg)
PRB140
5.6”
(142 mm)
3.7”
(95 mm)
16.1”
(410 mm)
2.0 lbs.
(0.9 kg)
Part No.
Throat
Depth
Opening
OAL
Weight
PSB60
2.1”
(52 mm)
1.9”
(48 mm)
8.2”
(208 mm)
0.6 lb.
(0.3 kg)
PSB80
3”
(76 mm)
2.4”
(60 mm)
11.4”
(290 mm)
1.3 lbs.
(0.6 kg)
PSB110
3”
(76 mm)
3”
(75 mm)
13.8”
(350 mm)
1.9 lbs.
(0.9 kg)
PSB140
5.6”
(142 mm)
4.7”
(120 mm)
16.3”
(415 mm)
2.3 lbs.
(1.0 kg)
Part No.
Chain
Length
Holds Pipes
Weight
PFC1024
24”
(600 mm)
up to 6.5”
(165 mm)
1.9 lbs.
(0.9 kg)
PFC1036
36”
(910 mm)
up to 10.5”
(270 mm)
2.4 lbs.
(1.1 kg)
PFC1048
48”
(1,200 mm)
up to 14”
(360 mm)
2.8 lbs.
(1.4 kg)
800.989.5244 | www.stronghandtools.com | sales@stronghandtools.com | Santa Fe Springs, CA 90670 U.S.A.
NEW
PRODUCT
2016
Product Details
* PATENT PENDING *
INSIDE OUTSIDE ANGLE MAGNETS
Hold stock using the Inside or Outside edges!
MLD SERIES
90º magnets
MLA SERIES
Adjustable magnets
Adjustable magnet for
angles from 30°~270°.
Narrow profile for
use in tight spots.
Two magnets inside
+ double plates for
maximum pull
90º
Long edge
45º
Mounting Hole
Breakaway
leverage hole
Insert Allen wrench (incl.)
to lock angle.
Fully enclosed
Rest
Deep Tank
Hold stock from the outside, leaving clearance
for inside welds, or hold stock from the inside for
outside welds.
•
•
End Cap
Angled Joint
•
•
Part No.
Angles
Height
Width
30º
Hold and position sheet metal, round pipes,
square, angled or flat stock.
The Inside / Outside Angle Magnets are
constructed from two independent rectangular
magnets for consistent, undiminished magnetic
force when both sides are attached to
workpieces.
Use mounting holes to link two magnets together
for use as fixturing elements.
Use hex hole on magnet for breakaway leverage.
Thickness
Mag. Pull Force
MLDT350: MLD300 + MLD500 2 pc. Combo Pack
Weight
1 lb. (0.5 kg)
1pc MLD300
1pc MLD500
90º (30º, 60º)
90º (30º, 60º)
3” (75.5 mm)
5” (125 mm)
2” (52 mm)
3.35” (85 mm)
0.55” (14 mm)
0.55” (14 mm)
20 lbs. (9 kg)
33 lbs. (15 kg)
MLD600
90º (30º, 60º)
6” (165 mm)
4.33” (110 mm)
0.79” (20 mm)
40 lbs. (18 kg)
1.7 lbs. (0.8 kg)
MLA450
30-270º
4.7” (120 mm)
4.7” (120 mm)
0.72” (18 mm)
26 lbs. (12 kg)
1.2 lbs. (0.5 kg)
MLA600
30-270º
6” (156 mm)
6” (156 mm)
0.79” (20 mm)
33 lbs. (15 kg)
2 lbs. (0.9 kg)
800.989.5244 | www.stronghandtools.com | sales@stronghandtools.com | Santa Fe Springs, CA 90670 U.S.A.
NEW
PRODUCT
2016
Product Details
BIG MOUTH PLIERS
FOUR Adjustment Slots - Large Capacity
Non-Slip Grip
Fast, Easy Pressure
Adjustment
Four Adjustment Slots
Minimal Hand Spread
Easy to grasp with one hand
* Insert screwdriver for
greater torque
* Hanging storage hole
V-Notch for
small parts
Single-hand release trigger
No finger crimping
Model PAJ100 shown
ADJUST INSTANTLY TO HOLD LARGE OR SMALL WORKPIECES
•
•
•
•
3”
Unique crank handle for FAST opening, closing, adjusting.
Serrated jaw surfaces for extra gripping power.
V-Notch on top jaw for holding small parts.
Long jaw (2-1/4” / 64 mm) for extra capacity and greater versatility in workholding.
Keep this versatile tool on hand for fast clamping in a variety of jobs!
Gripping
Soft Copper Jaw
For clamping
parts with
soft surface
or fine finish.
Compatible with
Stainless Steel
and Aluminum.
Work Holding
As small
as 1/4”
PAJ100
Opening: 1/4 ~ 3” / 6 ~ 75 mm
Throat Depth: 2-1/2” / 64
Overall Length: 10” / 250
* Uniform dimensions for all
listed models.
V-Notch for small parts
Copper Grounding
Copper jaw
w/ connecting
ribbon.
PAJ102
300 AMPS PAJ207
Part No.
Weight
PAJ100
1.5 lbs. (0.7 kg)
PAJ102
Soft Jaw
2 lbs. (0.9 kg)
PAJ207
Grounding
2.2 lbs. (1 kg)
800.989.5244 | www.stronghandtools.com | sales@stronghandtools.com | Santa Fe Springs, CA 90670 U.S.A.
Download