V ishay I ntertechnolog y, I nc .
AND TEC
O L OGY
INNOVAT
I
N
HN
Multilayer Ceramic Chip Capacitors
VJ 6040
O
19
62-2012
Capacitors - Complete UHF Band Coverage
Multilayer Ceramic Chip Antenna
for Mobile Devices
Key Benefits
•
•
•
•
•
•
Small outline (10.5 mm x 15.5 mm x 1.2 mm)
Omni-directional, linear polarization
Complete UHF band coverage (470 MHz to 860 MHz) up to 1.1 GHz
UHF receivers for DVB-T, DVB-H, ISDB-T, CMMB, MediaFLO, ATSC devices
50 Ω unbalanced interface
Compliant to RoHS Directive 2011/65/EU
APPLICATIONS
•
•
•
•
•
•
•
•
Mobile phones
Portable multimedia devices
Notebooks
GPS
Alarm systems
Meters (gas, water)
Medical monitoring devices
RFID
Resources
• Datasheet: VJ6040 - http://www.vishay.com/doc?45157
• For technical questions contact chipantenna@vishay.com
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT0184-1203
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FEATURES
Vishay Vitramon
• Small outline (10.5 mm x 15.5 mm x 1.2 mm)
V ishay I ntertechnolog
y, I nc .
• Omni-directional, linear polarization
VJ 6040 UHF Chip Antenna
for Mobile Devices
• Complies with MBRAI standard
AND TEC
I
INNOVAT
FEATURES
O L OGY
Multilayer Ceramic Chip Capacitors
VJ 6040
HN
N
• Complete UHF band coverage (470 MHz
O to 860 MHz) up
to 1.1 GHz
• Requires a tuning circuit and ground plane for optimal
• Small outline (10.5 mm x 15.5 mm x 1.2 mm)
performance
• Omni-directional, linear polarization
• Standard SMT assembly
• Complies with MBRAI standard
• 50 Ω unbalanced interface
1
2
• Complete UHF band coverage (470 MHz 9to6 860
0 1 up
2 -°C)
2 MHz)
• Operating temperature range (- 40 °C to + 85
to 1.1 GHz
• Reference design and evaluation boards available upon
• Requires a tuning circuit and ground plane for optimal
request
performance
• Compliant to RoHS directive 2002/95/EC
• Standard SMT assembly
The company’s products are covered by one or more of the
following:
WO2008250262 (A1), US2008303720 (A1),
US2008305750 (A1), WO2008154173 (A1).
Other patents pending.
VJ 6040
DESCRIPTION
Vitramon
The company’s products are coveredVishay
by one or more
of the
The VJ 6040 multi-layer ceramic chip antenna is a small
• APPLICATIONS
50 Ω unbalanced interface
following:
form-factor, high-performance,
chip-antenna
designed for
WO2008250262
(A1), US2008303720
(A1),
• •Operating
temperature
range (- including
40 °C to + DVB-T,
85 °C) DVB-H,
Mobile UHF
TV receivers
TV reception in(A1),
mobile
devices in the(A1).
UHF band. It allows
US2008305750
WO2008154173
ISDB-T, CMMB,
and MediaFLO
• Reference
design ATSC,
and evaluation
boardsdevices
available upon
mobile
TV device
manufacturers to design high quality
Other
patents
pending.
request
products that do not bear the penalty of a large external
ANTENNA
PERFORMANCE
antenna. Utilizing Vishay's unique materials and
• Compliant to RoHS directive 2002/95/EC
DESCRIPTION
FEATURES
manufacturing technologies, this product complies with the
Peak gain
The
VJ 6040
multi-layer
ceramic
• Small
outline
(10.5
x 15.5 chip
mm
xantenna
1.2outline.
mm)is a small
MBRAI
standard
while mm
maintaining
a small
APPLICATIONS
The antenna radiation characteristics are influenced by
high-performance,
chip-antenna
designed
for
VJ form-factor,
6040
UHF
Chip
Antenna
for
Mobile
Devices
Focusing
on consumer
applications,
the antenna is designed
Vishay
Vitramon
• Omni-directional,
linear
polarization
factors
including
ground
plane DVB-T,
dimensions
and
• several
Mobile
UHF TV
receivers
including
DVB-H,
TV
in mobile
in theinUHF
It allows
to• reception
be
assembled
ontodevices
a standard
PC board
the band.
standard
reflow
impedance
matching
network.
ISDB-T, CMMB,
ATSC,
and MediaFLO devices
Complies
with MBRAI
mobile
TV
device
manufacturers
to
design
high
quality
process.
The antenna parameters presented hereafter were
products
that do
notband
bearcoverage
the penalty
a large
external
• Complete
UHF
(470ofMHz
to 860
MHz) up
Target
customers
VJ 6040unique
are mobile
phone makers,
ANTENNA
PERFORMANCE
measured according
to the configuration suggested by the
antenna.
Utilizingof the
Vishay's
materials
and
to 1.1
GHz
300
portable
multimedia
device
makers,
notebook
OEMs
and
10
s
VJ 6040
manufacturing
technologies,
thisand
product
complies
withoptimal
the
Peak
gain evaluation board, utilizing its four channel active
•
Requires
a
tuning
circuit
ground
plane
for
T
ODMs,standard
and accessory
card OEMsaand
ODMs.
digital
tuning
circuit.
The
evaluation board
plane
MBRAI
while
maintaining
small
outline.
260 °C
(°C)performance
The antenna radiation characteristics
are ground
influenced
byis
245
°C
The250
VJ 6040
is the first
of a family ˜of
products
developed
40 mm factors
by 80 mm
large. ground plane dimensions and
Focusing
on consumer
applications,
the
antenna
is designedby
several
including
•
Standard
SMT
assembly
10
s
Vishay,
a
world
leader
in
manufacturing
of
discrete
and
The company’s products are covered by one or more of the
to be assembled onto a PC board 215
in the
°C standard reflow
impedance matching network.
• 50 Ωcomponents.
unbalanced interface
passive
following:
Figure 1 shows peak gain over frequency throughout the
process.
200
The
parameters
hereafter were
s
WO2008250262 (A1), US2008303720 (A1),
180 °C
°C to + 8540
UHF antenna
band, compared
with thepresented
MBRAI requirements.
• Operating
temperature
rangeare
(- 40
Target
customers
of the VJ 6040
mobile
phone°C)
makers,
measured
according to the configuration suggested by the
US2008305750 (A1), WO2008154173 (A1).
portable
multimedia
device
makers, notebook
OEMs and
• 150
Reference
design
and evaluation
boards available
upon
VJ 6040 evaluation board, utilizing its four channel active
Other patents pending.
130 and
°C ODMs.
ODMs,
and accessory card OEMs
request
digital tuning circuit. The evaluation board ground plane is
The
VJ
6040
is
the
first
of
a
family
of
products
developed
by
40 mm by 80 mm large.
0
•
Compliant
to
RoHS
directive
2002/95/EC
DESCRIPTION
100
Vishay, a world leader in manufacturing of discrete and
The VJ 6040 multi-layer ceramic chip antenna is a small
-2
passive
components.
Figure 1 shows peak gain over frequency throughout the
2 K/s
APPLICATIONS
form-factor, high-performance, chip-antenna designed for
50
UHF band,Simulated
compared with the MBRAI requirements.
6040
Chip
Antenna
for Mobile
Devices
Vishay
Vitramon
• Mobile VJ
UHF
TV UHF
receivers
including
Measured
- 4 DVB-T, DVB-H,
TV reception in mobile devices in the
UHF band.
It allows
ISDB-T, CMMB, ATSC, and MediaFLO devices
mobile TV device manufacturers to design high quality
VJ 6040
Peak Gain (dBi)
VJ 6040
0
Vis
VJ 6040 UHF Chip Antenna for Mobile Device
-6
products that do not bear the penalty of a large external
50
100
150
200
t (s) 250
Standard
ANTENNADIMENSIONS
PERFORMANCE 0
antenna. Utilizing Vishay's unique
materials AND
and MECHANICAL
FOOTPRINT
-8
manufacturing technologies, this product complies with the
Peak
gain
The antenna footprint and mechanical dimensions
are
presented
inwith
figure
6.
For mechanical support, it is recommended to add FEATURES
2
Fig.
8
Soldering
Reflow
Sn
Solder
MBRAI standard while maintaining a small outline.
antenna
radiation
characteristics
one or two drops of heat curingThe
epoxy
glue. The
glue dot
should not overlap
with any of by
the soldering pads. It is recommended
- 10are influenced
Focusing on consumer applications, the antenna is designed
Simulated
several
factors
including
ground
dimensions
and
to apply the glue dot at the center
of the
antenna,
as shown
by theplane
diagonal
pattern. For
more details see
“VJ 6040 Assembly • Small outline (10.5 mm x 15.5 mm x
Measured
-4
to be assembled onto a PC board in the standard reflow
impedance
matching
network.
- 12
linear polarization
Guidelines” section below.
VJ
6040
UHF
Chip
Antenna
for Mobile• Omni-directional,
Devices
Vishay
Vitramon
process.
450 for
500 Mobile
550 600Devices
650 700 750 800 850 900
VJ 6040
UHF Chip
Antenna
-6
Vishay Vitramon The antenna
parameters
presented
hereafter
were
• Complies with MBRAI standard
Frequency
(MHz) Standard
0.35
0.5
0.5
0.35
Target customers of the VJ 6040 are mobile phone makers,
measured according
to
the
configuration
suggested
by
the
3.6
3.6
4.6
• Complete UHF band coverage (470
1.0
portable multimedia device makers, notebook OEMs and
1.0 evaluation board, utilizing its
- 8four channel
VJ 6040
Fig. 1 - active
Peak gain vs. Frequency
`
to 1.1 GHz
0.35
0.35
ODMs, and accessory card OEMs and ODMs.
digital
tuning circuit. The evaluation board ground plane is
300
- 10
1.0
• Requires a tuning circuit and grou
The VJ 6040 is the first of a family of products developed by
Max. temperature
40
mm Figure
by 80 mmdisplays
large. the measured and simulated
radiation efficiency of VJ 6040 over frequency.
T and
Figure 2 displays the measured
simulated2 radiation
efficiency of VJ 6040 over frequency.
performance
Vishay, a world leader in manufacturing of discrete and
(°C)
Document
Number: 45157
For technical questions, contact: mlcc@vishay.com
www.vishay.com
- 12
250 15-Jun-10
Revision:
1
passive components.
Figure
1 shows peak gain over
throughout
the650
• Standard SMT assembly
450 500
550 600
700 750
800 or850
900of the
4.65
Thefrequency
company’s
products
are
covered
by one
more
UHF band, compared with the following:
MBRAI requirements.
Frequency (MHz)
• 50 Ω unbalanced interface
0.5
0
• Reference design and evaluation b
request
Min.
temperature
DESCRIPTION
25
• Compliant to RoHS directive
2002/95
1
30
Efficiency (%)
• Operating temperature range (- 40 °C
Glue dot area
35
Simulated value
For technical30
questions, contact: mlcc@vishay.com
Document Number: 45157
25
Revision:
100 15-Jun-10
-2
VJ 6040
VJ 6040
VJ 6040
6040 UHF Chip
Vishay
Vitramon VJ 6040
VJ VJ
6040
WO2008250262Fig.
(A1),
US2008303720
(A1),
40
1 - Peak
gain vs. Frequency
US2008305750 (A1), WO2008154173 (A1).
Simulated value
35
Other patents pending.
Sn-Ag-Cu
solder paste
40
150
Measured value
www.vishay.com
Efficiency (%)
200
Peak Gain (dBi)
VJ 6040
VJ 6040
The VJ 6040 multi-layer
ceramic chip Measured
antennavalue
is a small
20
form-factor, high-performance, chip-antenna designed for
15
TV
reception
in
mobile
devices
in
the
UHF
band.
It allows
-6
10
mobile TV device10manufacturers to
design high quality
Standard
1.0
0
5
products that
do not bear the penalty 0.35
of a large external
-8
30 s to 60 s 5
0.35
Time
antenna.
Vishay's
unique materials and
60 0s to 120 s
60 s to 120
s
60 sUtilizing
to 120 s
1.0
460 510 560 610 manufacturing
660 710 760 technologies,
8100All dimensions
860
- 10
this
product complies with the
in mm
460 not
510in scale
560 610 660 710 760 810
Frequency (MHz)
Figure
MBRAI standard while
maintaining
a small outline.
Frequency (MHz)
- 12
Fig. 9 - Soldering IR Reflow
with SnAgCu
Solder applications, the antenna is designed
Focusing
on consumer
450 500 550 600 650 700 750 800 850 900
to
be
assembled
onto
a
PC
board
in the standard reflow
RF feed
connects here
Frequency
(MHz)
Antenna for Mobile Devices
Fig. 2 -Devices
Radiation
Efficiency
vs.
Frequency
VJ 6040 UHF Chip
Antenna
for Mobile
process.
Fig. 6VJ
- VJ
6040 Footprint
6040
UHF
Chip Antenna for Mobile Devices
Vishay
Vitramon
Peak Gain (dBi)
Capacitors - Complete UHF Band Coverage
VJVJ6040
UHF
Chip for
Antenna
for Mobile Devices
6040 UHF
Chip Antenna
Mobile Devices
-4
Measured
4.65
50
Simulated
20
15
APPLICATIONS
• Mobile UHF TV receivers includ
ISDB-T, CMMB, ATSC, and MediaFL
ANTENNA PERFORMANCE
860
VJ 6040
Vishay Vitramon
VJfor
6040
UHFDevices
Chip Antenna
for
Mobile
Fig. 1 -Devices
Peak gain vs.
Frequency
VJ 6040
UHF Chip
Antenna
Mobile
Fig.VJ
2 - Radiation
Efficiency
vs. Frequency
Vishay
Vitramon
VJ 6040
UHF
Chip
Antenna
for
Mobilefor
Devices
Vishay
Vitramon
customers
of the
phone
makers,
VJApplications
6040
ASSEMBLY
GUIDELINES
that
do not
require
full coverage
ofMobile
the UHF Devices
bandTarget
can gain
an additional
two to6040
threeare
dBimobile
by removing
the
tuning
VJ
6040
UHF
Chip
Antenna
Vitramon
VJ 6040 UHF Chip AntennaVishay
for Mobile
Devices
VJ 6040 UHF Chip Antenna for Mobile
Peak gain
The antenna radiation characteristic
several factors including ground pla
impedance matching network.
The antenna parameters present
measured according to the configurat
portable
multimedia
device
makers,
notebook
OEMsare
and
In this
case
the antenna
can becircuit
fixed board
to any 150
MHz
band
within
the coverage
UHF
range.
ORDERING
INFORMATION
VISHAY
MATERIAL
PACKAGING
board, the
utilizing
Mounting
of antennas
on a printed
should
done
by reflow
soldering.
reflow
soldering
profiles
showntwoVJto6040
Devices1. circuit.
Applications
that
dobe
not
require
full
of The
the UHF
band
canQUANTITY
gain
an additional
three evaluation
dBi by removing
tuningits
ODMs, and accessory card OEMs and1000
ODMs.
pieces
digital tuning circuit. The evaluation b
VJ 6040
VJ6040M011SXISRA0
ured and simulated radiation efficiency of VJ 6040 over frequency.
15
10
5
0
460
15
25
Measured value
5
10
10
20
5
15
0
10
460
20
25
Simulated
value
Measured value 15
20
Measured value
10
15
20
30
510
560
610
660
710
05
460 510 560
0
460 810
510 860
560
760
(MHz)810
610 660 Frequency
710 760
Frequency (MHz)
5105 560
860
300
40
Z
TSimulated value
35
(°C)value
Simulated
30 Document
Simulated
value questions,
25 35 Number: 45157
For technical
25
Measured value
> 215 °C: 20 s to 40 s
Measured value
15-Jun-10
25 Revision:
20 30
20
200
Measured value
Measured value
20
15 25
15
15
10
610 660 5710
Frequency (MHz)
0
610 660 460
710
Frequency (MHz)
10 20
Measured value
150
510
Max. temperature
0
X
contact: mlcc@vishay.com
-2
Measured value
10
5 15
Min. temperature
5
100
0
760
860
10 810
460
510 560 610 660 710 760 810
760 560
860 660
Frequency
510
710 (MHz)
760 810 860
5 810 610
50
Frequency (MHz)
0
460
860
510
560
Sn-Pb eutectic solder paste
610 660 710
Frequency (MHz)
760
810
0
460
510 560 610 660 710 760 810 860
Fig. 2 - Radiation Efficiency vs. Frequency
0
Fig. 2 - Radiation Efficiency
vs. Frequency
Frequency
(MHz)
610 660 710 760 810 860
to 60 s
Fig.
2
Radiation
Efficiency
vs.
Frequency
Fig.
2
Radiation
Efficiency
vs.
Frequency
Fig.
- Radiation two
Efficiency
vs. Frequency
Applications that do not require
full (MHz)
coverage of the UHF band can gain
an2 additional
to three
dBi by removing 30
thes tuning
Frequency
0
460
Simulated value
Z
30
250
Peak Gain (dBi)
20
25
35
35
Efficiency (%)
25
25
Simulated value
30
40
30
Efficiency (%)
Efficiency (%)
Efficiency (%)
30
40
30
35
Simulated
value
Efficiency
Efficiency
(%) (%)
35
40
Simulated value
35
Simulated
value
30 40
Efficiency (%)
35
35
40
Efficiency (%)
40
40
UHF band, compared with the MBRAI
The 3D planes of VJ 6040 are defined in figure 3.
40
Efficiency (%)
Revision 15-Jun-10
circuit. In this case the antenna can be
fixed to any 150 MHz band within the UHF range.
Document
Number:
45157
technical
questions, contact: mlcc@vishay.com
www.vishay.com
Figure 2 displays the measured and
simulated
radiation
efficiency of VJ below.
6040For
over
frequency.
Theradiation
VJ
is thethe
first
of a6040
products
by glue 40 mm by 80 mm large.
Figure 2 displays
radiation
efficiency
of
VJ 6040
over
frequency.
Figure
2 displays
the
measured
andthe
simulated
of
VJ
over
Revision:
15-Jun-10the measured and simulated
1family
2. RADIATION
In order
to provide
the adequate
strength
between
antenna
and6040
theefficiency
PCB
application
ofof
afrequency.
dot
of heatdeveloped
cured epoxy
PATTERN
Figure
2
displays
the
measured
and
simulated
radiation
efficiency
of VJ 6040
over frequency.
Vishay,
a world
leader
in should
manufacturing
sured and simulated radiation efficiency
of 2VJ
6040 over
Figure
displays
the frequency.
measured
and simulated
efficiency
of VJ 6040
frequency.
inradiation
the center
of the footprint
of over
the antenna
prior to the antenna's
soldering
to the
board
be done. of
Andiscrete
exampleand
for such
The 3D planes
of VJefficiency
6040 are defined
in
figure
3.
passive
components.
2 displays the measured andglue
simulated
radiation
of
VJ
6040
over
frequency.
Figure 1 shows peak gain over frequ
d simulated radiation efficiency of VJ 6040Figure
over frequency.
PATTERN
could be Heraeus PD 860002 SA.RADIATION
The weight of the
dot should be 5 mg to 10 mg.
560
30 s to 60 s
30 s to 60 s
Time
X
Measured
Simulated
-6
Standard
-8
860
- 10
- 12
450
Fig. 2 - Radiation Efficiency vs. Frequency
www.vishay.com
5
-4
500
550
600 650 700 750
Frequency (MHz)
800
850 900
Applications that do not require full coverage of the UHF band
can gainthat
an additional
two to
dBi byofremoving
tuning
Applications
do not require
fullthree
coverage
the UHF the
band
can gain an additional two to three
by removing
tuning
Fig.dBi
1 - Peak
gain vs. the
Frequency
circuit.
this caseEfficiency
the antenna
can be fixed to any 150 MHz band within the UHF range.
Fig. 2 In
- Radiation
vs. Frequency
Fig.
7 - can
Soldering
IR Reflow
with
SnPbband
Solder
Y
notband
require
coverage
therequire
UHF
band
can
anthe
additional
twoMHz
to circuit.
three
by removing
the
tuning
circuit.
Inadditional
this
case
the to
antenna
cangain
beremoving
fixed
toUHF
any
150
banddBi
within
the
quire fullApplications
coverage ofthat
the do
UHF
canfull
gain
an
two
three
dBi
by
theband
tuning
In
this
caseUHF
the
antenna
to anythe
150
MHz
within the UHF range.
Applications
that
doofnot
full
coverage
of
can
gain
an
additional
tworange.
to three
dBibe
byfixed
removing
tuning
In UHF
this
case
the
antenna
fixed
tothe
any
150 MHz
band
within
range.
- Radiation
vs. Frequency
enna
cancircuit.
beoffixed
to any
150
MHz
band
within
the
UHF
range.
circuit.
In be
this
case
can
be
fixed
tothe
any
150Fig.
MHz2 band
withinEfficiency
the UHF range.
coverage
the
band
can
gain
ancan
additional
two
toantenna
three
dBi
by
removing
theUHF
tuning
Fig. 3 - VJ 6040 Document
3D Plane Definition
n be fixedRADIATION
to any 150
MHz
band within
the UHFvs.
range.
Fig.
2 -PATTERN
Radiation
Efficiency
Frequency
Number: 45157
For technical questions, contact: mlcc@vishay.com
technicaltwo
questions,
contact:
mlcc@vishay.com
Document Number: 45157
RADIATION
PATTERN
Applications
that
do not require full www.vishay.com
coverage of the UHF
band can gain
anFor
additional
to three
dBi by
removing the tuning
RADIATION
PATTERN
Y
Revision: 15-Jun-10
The 3D planes ofPATTERN
VJ 6040 are defined
in figure
3.case the antenna can4be fixed to any 150 MHz band within the UHF range.
Revision: 15-Jun-10
RN fullRADIATION
circuit.
this
RADIATION
PATTERN
quire
coverage of the UHF band
can
gain
an
additional
two are
to three
dBiinby
removing
the tuning
The
3D In
planes
of VJ 6040
defined
figure
3.
The 3D planes of VJ 6040 are defined in figure 3.
The
3D
planes
of
VJ
6040
are
defined
in
figure
3.
are
defined
in
figure
3.
nna can be fixed to any 150 MHzThe
band
UHF
range.
3D within
planesthe
of VJ
6040
are defined in figure 3.
Fig. 3 - VJ 6040 3D Plane Definition
ned in figure 3.
RN
Z
RADIATION
PATTERN
PRODUCT
SHEET
Z
are defined
in figure 3.
Z
Z
2/2
Z
Z
For technical questions, contact: mlcc@vishay.com
www.vishay.com
The 3D
in figure 3.
Z planes of VJ 6040 are defined
Z
2
X
X
VMN-PT0184-1203
Document Number: 45157
Revision: 15-Jun-10
This document
is subject to change
without notice.
THE PRODUCTS DESCRIBED HEREIN XAND THIS DOCUMENT ARE SUBJECT TO
X
X
X
Z
www.vishay.com
For technical questions, contact: mlcc@vishay.com
Document Number: 45157
SPECIFIC DISCLAIMERS,
SET FORTH AT www.vishay.com/doc?91000
X
2
Revision: 15-Jun-10