PRCM Series
Cylindrical connector type proximity sensor
Features
● Improved the noise resistance with dedicated IC
● Built-in reverse polarity protection circuit
(DC 3-wire type)
● Built-in surge protection circuit
● Built-in overcurrent protection circuit (DC type)
● Protection structure IP67 (IEC standard) for
connector part
● Replaceable for micro switches and limit switches
Please read “Caution for your safety” in operation
manual before using.
Specifications
● DC 2-wire type
Model
Sensing distance
Hysteresis
Standard sensing
target
Setting distance
Power supply
(Operating voltage)
Leakage current
Response
frequency※1
Residual voltage
Affection by Temp.
Control output
Insulation resistance
Dielectric strength
Vibration
Shock
Indicator
Ambient
Environ- temperature
Ambient
ment
humidity
Protection circuit
Protection
Material
Approval
Weight※2
PRCMT18-5DO
PRCMT18-5DC
PRCMT18-5DO-I
PRCMT18-5DC-I
PRCMT18-8DO
PRCMT18-8DC
PRCMT18-8DO-I
PRCMT18-8DC-I
PRCMT30-10DO
PRCMT30-10DC
PRCMT30-10DO-I
PRCMT30-10DC-I
PRCMT30-15DO
PRCMT30-15DC
PRCMT30-15DO-I
PRCMT30-15DC-I
2mm
4mm
Max. 10% of sensing distance
5mm
8mm
10mm
15mm
12×12×1mm(Iron)
18×18×1mm(Iron) 25×25×1mm(Iron) 30×30×1mm(Iron) 45×45×1mm(Iron)
PRCMT12-2DO
PRCMT12-2DC
PRCMT12-2DO-I
PRCMT12-2DC-I
PRCMT12-4DO
PRCMT12-4DC
PRCMT12-4DO-I
PRCMT12-4DC-I
0 to 1.4mm
12-24VDC
(10-30VDC)
Max. 0.6mA
0 to 2.8mm
0 to 3.5mm
0 to 5.6mm
0 to 7mm
1.5kHz
500Hz
350Hz
400Hz
200Hz
0 to 10.5mm
Max. 3.5V
Max. ±10% for sensing distance at ambient temperature 20℃
2 to 100mA
Min. 50MΩ(at 500VDC megger)
1500VAC 50/60Hz for 1minute
1mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times
Operation indicator(red LED)
-25 to 70℃, storage: -30 to 80℃
35 to 95%RH, storage: 35 to 95%RH
Surge protection circuit, Overcurrent protection
IP67(IEC Standard)
Case/Nut: Nickel plated Brass, Washer: Nickel plated Iron, Sensing surface: PBT
Standard Cable(Black): Polyvinyl chloride(PVC), Oil resistant cable(Gray): Oil resistant Polyvinyl chloride(PVC)
Approx. 38g(approx. 26g)
Approx. 60g(approx. 48g)
Approx. 154g(approx. 142g)
※1: The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard
sensing target, 1/2 of the sensing distance for the distance.
※2: The weight with packaging and the weight in parentheses is only unit weight.
※There is IEC standard connector cable. Refer to the G-6 about IEC standard connector wires and specifications.
※Environment resistance is rated at no freezing or condensation.
D-38
Cylindrical Connector type
Specifications
(A)
Photo
electric
sensorr
● DC 3-wire type
PRCM12-4DN
PRCM12-4DP
PRCM12-4DN2
PRCM12-4DP2
Model
PRCM12-2DN
PRCM12-2DP
PRCM12-2DN2
PRCM12-2DP2
Sensing distance
Hysteresis
Standard sensing target
Sensing distance
2mm
4mm
Max. 10% of sensing distance
12×12×1mm(Iron)
0 to 1.4mm
0 to 2.8mm
Power supply
(Operating voltage)
12-24VDC
(10-30VDC)
PRCM18-5DN
PRCM18-5DP
PRCM18-5DN2
PRCM18-5DP2
PRCML18-5DN
PRCML18-5DP
PRCML18-5DN2
PRCML18-5DP2
PRCM18-8DN
PRCM18-8DP
PRCM18-8DN2
PRCM18-8DP2
PRCML18-8DN
PRCML18-8DP
PRCML18-8DN2
PRCML18-8DP2
PRCM30-10DN
PRCM30-10DP
PRCM30-10DN2
PRCM30-10DP2
PRCML30-10DN
PRCML30-10DP
PRCML30-10DN2
PRCML30-10DP2
PRCM30-15DN
PRCM30-15DP
PRCM30-15DN2
PRCM30-15DP2
PRCML30-15DN
PRCML30-15DP
PRCML30-15DN2
PRCML30-15DP2
5mm
8mm
10mm
15mm
18×18×1mm(Iron)
0 to 3.5mm
25×25×1mm(Iron)
0 to 5.6mm
30×30×1mm(Iron)
0 to 7mm
45×45×1mm(Iron)
0 to 10.5mm
500kHz
350kHz
400kHz
200kHz
Current consumption
Max. 10mA
Response frequency※1
1.5kHz
Residual voltage
Max. 1.5V
Affection by Temp.
Max. ±10% for sensing distance at ambient temperature 20℃
Control output
Max. 200mA
Insulation resistance
Min. 50MΩ(at 500VDC megger)
Dielectric strength
1500VAC 50/60Hz for 1minute
Vibration
1mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
Shock
500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times
Indicator
Operation indicator(red LED)
500kHz
Protection
IP67(IEC Standard)
Material
(H)
Temp.
controller
Case/Nut: Nickel plated Brass, Washer: Nickel plated Iron, Sensing surface: PBT
(J)
Counter
(K)
Timer
Approval
PRCM: Approx. 61g(approx. 49g)
PRCML: Approx. 85g(approx. 73g)
PRCM: Approx. 146g(approx. 134g)
PRCML: Approx. 181g(approx. 169g)
PRCM18-5AO
PRCM18-5AC
PRCML18-5AO
PRCML18-5AC
PRCM18-8AO
PRCM18-8AC
PRCML18-8AO
PRCML18-8AC
PRCM30-10AO
PRCM30-10AC
PRCML30-10AO
PRCML30-10AC
PRCM30-15AO
PRCM30-15AC
PRCML30-15AO
PRCML30-15AC
5mm
8mm
10mm
15mm
18×18×1mm(Iron)
0 to 3.5mm
25×25×1mm(Iron)
0 to 5.6mm
30×30×1mm(Iron)
0 to 7mm
45×45×1mm(Iron)
0 to 10.5mm
(L)
Panel
meter
● AC 2-wire type
PRCM12-4AO
PRCM12-4AC
PRCM12-2AO
PRCM12-2AC
Sensing distance
Hysteresis
Standard sensing target
Sensing distance
2mm
4mm
Max. 10% of sensing distance
12×12×1mm(Iron)
0 to 1.4mm
0 to 2.8mm
Power supply
(Operating voltage)
100-240VAC
(85-264VAC)
(M)
Tacho/
Speed/ Pulse
meter
(N)
Display
unit
Max. 2.5mA
Response frequency※1
20Hz
Residual voltage
Max. 10V
Affection by Temp.
Max. ±10% for sensing distance at ambient temperature 20℃
(Q)
Stepper
motor&
Driver&Controller
5 to 200mA
Control output
5 to 150mA
Insulation resistance
Min. 50MΩ(at 500VDC megger)
Dielectric strength
2,500VAC 50/60Hz for 1minute
Vibration
1mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
Shock
500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times
Indicator
Operation indicator(red LED)
(R)
Graphic/
Logic
panel
(S)
Field
network
device
Environ- Ambient temperature -25 to 70℃, storage: -30 to 80℃
ment
Ambient humidity
35 to 95%RH, storage: 35 to 95%RH
Protection circuit
Surge protection circuit
Protection
IP67(IEC Standard)
Insulation type
Double insulation or reinforced insulation
(Mark: , dielectric strength between the measuring input part and the power part: 1kV)
Material
Case/Nut: Nickel plated Brass, Washer: Nickel plated Iron, Sensing surface: PBT
(T)
Software
(U)
Other
Approval
Approx. 42g(approx. 30g)
(O)
Sensor
controller
(P)
Switching
mode power
supply
Current consumption
Weight※2
(E)
Pressure
sensor
(I)
SSR/
Power
controller
Surge protection circuit, Reverse polarity protection circuit, Overcurrent protection
Model
(D)
Proximity
sensor
(G)
Connector/
Socket
Protection circuit
Approx. 38g(approx. 26g)
(C)
Door/Area
sensor
(F)
Rotary
encoder
Environ- Ambient temperature -25 to 70℃, storage: -30 to 80℃
ment
Ambient humidity
35 to 95%RH, storage: 35 to 95%RH
Weight※2
(B)
Fiber
optic
sensor
PRCM: Approx. 66g(approx. 54g)
PRCML: Approx. 78g(approx. 66g)
PRCM: Approx. 154g(approx. 142g)
PRCML: Approx. 194g(approx. 182g)
※1: The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard
sensing target, 1/2 of the sensing distance for the distance.
※2: The weight with packaging and the weight in parentheses is only unit weight.
※ Environment resistance is rated at no freezing or condensation.
D-39
PRCM Series
Dimensions
● PRCM12-2D
Ø21
/ PRCMT12-2D (-I)
55.8
17
M12×1
4
● PRCM18-5D
Ø29
Ø42
M12
Ø29
Operation
indicator
M18×1
● PRCM30-15D
Ø42
38
M18×1
/ PRCMT30-15D (-I)
10
35
Operation
indicator
M12
M30×1.5
M12
63.8
28
Operation
indicator
M12
M30×1.5
5
● PRCM12-4A
72.8
Ø21
17
4
M12×1
24
4
M12×1
10
24
M12
M12×1 M12
● PRCM30-15A
Operation
indicator
5
M30×1.5
Operation
indicator
62.5
24
M18×1
4
/ PRCML18-5A
5
24
85.8
10
M12
24
Operation
indicator
52
4
Ø42
Operation
indicator
M12
/ PRCML18-8A
M12
87.3
M30×1.5
Operation
indicator
M30×1.5
Ø29
● PRCML30-15D
62.5
35
28
5
● PRCML18-8D
87.3
10
35
M12
/ PRCML18-5A
Ø29
63.8
Ø42
63.8
38
Operation
indicator
25.3
4
● PRCM30-10A
35
M12
60.1
Ø29
Operation
indicator
M12×1
Ø42
Operation
indicator
● PRCM18-8A
35.8
4
7
17
M12
60.6
Ø29
72.8
41.5
Ø21
Operation
indicator
48.5
● PRCM18-5A
D-40
Operation
indicator
4
● PRCM12-2A
Ø42
53.8
M12
63.8
M12
19
10
24
/ PRCMT30-10D (-I)
5
● PRCML18-5D
Operation
indicator
M12×1
/ PRCMT18-8D (-I)
● PRCM18-8D
29.5
35
● PRCML18-5D
24.5
4
54.3
4
55.8
7
17
/ PRCMT18-5D (-I)
24
● PRCM30-10D
Ø21
Operation
indicator
31.5
(unit: mm)
/ PRCMT12-4D (-I)
● PRCM12-4D
/ PRCML30-15A
10
5
M30×1.5
85.8
50
M12
Operation
indicator
M30×1.5
M12
Cylindrical Connector type
Control output diagram
DC 2-wire type
Sensing
target
3
N.O.
Presence
Nothing
N.C.
1
Operation
Return
Load
Blue
DC 3-wire type
NPN output type
Main circuit
+V
Main circuit
Brown
Load
4
(A)
Photo
electric
sensorr
Operating ON
0V Indicator OFF
(red LED)
Brown
+V
Load
10kΩ
4
Load
(brown-black)
Black
Blue
3
Sensing
target
N.O.
Presence
None
Operation
Return
N.C.
(C)
Door/Area
sensor
Output voltage H
(black-blue)
L
Operating
ON
0V
Indicator
OFF
(red LED)
(D)
Proximity
sensor
(E)
Pressure
sensor
AC 2-wire type
Brown
Load
Sensing Presence
target None
100- 240VAC
50/60Hz
3
Blue
Load
N.O.
N.C.
PNP output type
1
Main circuit
Main circuit
4
Operation
Return
Operating ON
Indicator
(red LED) OFF
4
Brown
Black
Load
10kΩ
3
+V
Blue
Sensing
target
Load
(black-blue)
N.O.
Presence
None
Operation
Return
N.C.
Output voltage H
(black-blue) L
Operating
ON
Indicator
0V
OFF
(red LED)
(H)
Temp.
controller
(I)
SSR/
Power
controller
Wiring diagram
(J)
Counter
DC 2-wire type(IEC standard type)
DC 2-wire type(Standard type)
Normally Open(N.O.) / Normally Closed(N.C.)
1
3
4
Brown
Load
Blue
+V
2
1
3
4
Normally Open(N.O.)
Brown
Blue
0V
Load
+V
DC 3-wire type
2
1
3
4
+V
Load
Black
Blue
1
3
4
Brown
+V
Load
Blue
(K)
Timer
Normally Closed(N.C.)
Brown
2
1
3
4
Load
Blue
0V
+V
(L)
Panel
meter
0V
(M)
Tacho/
Speed/ Pulse
meter
※ ②,③ of N.O. type and ③,④ of N.C. type are not used
terminals.
※The pin arrangement of connector applying IEC standard is
being developed.
※Please attach "I" at the end of the name of standard type
for purchasing the IEC standard product.
Ex) PRDWT12-4DO-I
※The connector cable for IEC standard is being developed.
Please attach "I' at the end of the name of standard type.
Ex) CID2-2-I, CLD2-5-I
AC 2-wire type
PNP output type
Brown
2
0V
※Pin ①, ② are not used terminals.
※For DC 3-wire type connector cable, it is available to use
with black wire(12-24VDC) and blue wire(0V).
NPN output type
2
1
3
4
Brown
+V
Black
Blue
2
1
3
4
Blue
0V
※Please fasten the cleat of connector not to shown the
thread. (0.39 to 0.49N.m)
Brown
Load
~
2
1
3
4
(N)
Display
unit
(O)
Sensor
controller
(P)
Switching
mode power
supply
(Q)
Stepper
motor&
Driver&Controller
(R)
Graphic/
Logic
panel
Normally Open(N.O.) / Normally Closed(N.C.)
Load
0V
(F)
Rotary
encoder
(G)
Connector/
Socket
※The number in a circle is pin no. of connector.
2
(B)
Fiber
optic
sensor
(S)
Field
network
device
Brown
Blue
~
Load
※In AC inductive type, ② and ③, ① and ④ are connected
inside of the connector cable.
※Please fasten the vibration part with Teflon tape.
※Refer to the G-6 about IEC standard connector wires and specifications.
D-41
(T)
Software
(U)
Other
PRCM Series
Proper usage
Load connections
Brown
Brown
+
+
POWER
-
Blue
Brown
Load
< DC 2-wire type & AC 2-wire type >
100240VAC
50/60Hz
24VDC
Blue
Load
Blue
Load
< DC 2-wire type >
Load
< AC 2-wire type >
When using DC or AC 2-wire type proximity sensor, the load must be connected, otherwise internal components may be
damaged. The load can be connected to either wire.
Load connections
It may cause return failure of load by residual voltage.
If the load current is under 5mA, please make sure the
residual voltage is less than the return voltage of the load
by connecting a bleeder resistor in parallel with the load as
shown in the diagram.
● AC 2-wire type
Brown
Load
Vs
Bleeder resistor(R)
Blue
R=
110VAC : Min. 20kΩ 3W
220VAC : Min. 39kΩ 10W
● DC 2-wire type
Brown
Blue
P=
Vs2
(W)
R
[ I:Action current of load, R:Bleeder resistance, P:Permissible power]
Please make the current on proximity sensor smaller than
the return current of load by connecting a bleeder resistor
in parallel.
※W value of Bleeder resistor should be bigger for proper
heat dissipation.
Load
Bleeder resistor(R)
Vs
(Ω)
I
+
-
Vs
Vs
Vs2
(Ω)
P=
(W)
Io-Ioff
R
Io : Min. action current of proximity sensor,
: Power supply,
[ Vs
]
Ioff : Return current of load, P : Number of Bleeder resistance watt
R=
Mutual-interference & Influence by surrounding metals
When several proximity sensors are mounted close to one another a malfunction of the may be caused due to mutual
interference. Therefore, be sure to keep a minimum distance between the two sensors as below chart indicates.
Parallel
B
A
Face to Face
When sensors are mounted on metallic panel, it is required to protect the sensors from being affected by any metallic
object except target. Therefore, be sure to provide a minimum distance as below chart indicates.
m
ød
n
ℓ
ℓ
ℓ
(unit: mm)
Model
Item
A
B
ℓ
ød
m
n
D-42
PRCMT12-2D□
PRCM12-2D□
PRCM12-2A□
PRCMT12-4D□
PRCM12-4D□
PRCM12-4A□
PRCMT18-5D
PRCM(L)18-5D
PRCM(L)18-5A
PRCMT18-8D□
PRCM(L)18-8D□
PRCM(L)18-8A□
PRCMT30-10D□ PRCMT30-15D
PRCM(L)30-10D□ PRCM(L)30-15D
PRCM(L)30-10D□ PRCM(L)30-15A
12
24
0
12
6
18
24
36
11
36
12
36
30
36
0
18
15
27
48
54
14
54
24
54
60
60
0
30
30
45
90
90
15
90
45
90