LED Wall pack
specification sheets
LXSM106
catalog number:
MEDIUM die-cast aluminum LED Wall Pack
notes:
Benefits & Features
fixture type:
• 27 or 41 Watts Total Driver Consumption
• 90 Lumens per Watt
• Up to 50,000 Rated Life
project:
• 1700 to 2550 Initial Lumens
• 4700K - Color Temperature
• Optional Photocontrol Available
• IP65 Rated
Product Specifications
APPLICATION
Perimeter lighting for safety and security. Use on factories,warehouses, self storage,
commercial buildings, etc.
CONSTRUCTION
The LEDalux LXSM106 Series features a durable, corrosion-resistant, die-cast aluminum
enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is
IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM106 provides ideal
light distribution, and the LEDs are protected by a high-impact, heat resistant borosilicate
glass refractor.
LEDS
The LXSM106 uses a high power LED light engine with a constant current control and a
rated life of up to 50,000 hours with 70% lumen maintenance. Available with a 20 or 30 watt
LED light engine, accepts an input voltage of 120/277VAC and has an operating temperature
range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal heat and
contains no mercury or lead (RoHS compliant). LED circuits are temperature and current
controlled to prevent premature failure.
7.13"
9.29"
INSTALLATION
The LEDalux LXSM106 Series is ideal for mounting to any vertical surface and features a
hinged design for easy access to internal components. Can be wired to a 4’’ junction box, or
surface mounted using 1/2’’ NPT conduit entry points.
WARRANTY
Any housing component that fails due to manufacturer’s defect is guaranteed for two years
from time of shipment. Light element and driver are warrantied for five years from time of
shipment. Warranty does not apply to damages caused by improper installation, abuse, fire
or acts of God.
14.4"
13.4"
Photometrics
Approximate Weight: 10 lbs.
Ordering Information
Model
LED Watts
Volts
Accessories
LXSM106
20 = 20 Watts
DT = 120/277V
WG106 = Wire Guard
30 = 30 Watts
PG106 = Polycarbonate Guard
FC106 = Full Cutoff Shield
RL106 = Replacement Glass Lens
Ordering Example: LXSM106-30-DT-WG106
LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com
LXSM301
catalog number:
architectural Trapezoid, Full Cutoff LED Wall Pack
notes:
Benefits & Features
fixture type:
• 26, 37, 41 or 60 Watts Total Driver Consumption
• 100 Lumens per Watt
• Up to 50,000 Hour Rated Life
project:
• 2100, 3000, 4050 or 5000 Nominal Initial Lumens
• 5100K - Color Temperature
• Optional Photocontrol Available
• IP65 Rated
Product Specifications
APPLICATION
Architectural wallpack stylish Trapezoid shape with molded lines to accentuate building
architecture. Provides excellent illumination in several wattages.
CONSTRUCTION
The LEDalux LXSM301 Series features a durable, corrosion-resistant, die-cast aluminum
enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is
IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM301 provides ideal
light distribution, and the LEDs are protected by a high-impact, heat resistant tempered
glass lens.
LEDS
The LXSM301 uses a high power LED light engine with a constant current control and a
rated life of up to 50,000 hours with 70% lumen maintenance. Available with a 21, 30, 39 or
48 watt LED light engine featuring a 5100K color temperature. The LXSM301 accepts an
input voltage of 120/277VAC and has an operating temperature range of -20°C (-4°F) to
40°C (104°F). The LED light engine emits extremely low UV, minimal heat and contains no
mercury or lead (RoHS compliant). LED circuits are temperature and current controlled to
prevent premature failure.
INSTALLATION
The LEDalux LXSM301 Series is ideal for mounting to any vertical surface and features a
rugged die-cast aluminum mounting plate. Can be wired to a 4’’ junction box.
WARRANTY
Any housing component that fails due to manufacturer’s defect is guaranteed for two years
from time of shipment. Light element and driver are warrantied for five years from time of
shipment. Warranty does not apply to damages caused by improper installation, abuse, fire
or acts of God.
7"
7"
13.25"
Photometrics
16.75"
Ordering Information
Model
LED Watts
Volts
Accessories
LXSM301
21 = 21 Watts
DT = 120/277V
PC1 = 120V Photocontrol
30 = 30 Watts
PC2 = 208-277V Photocontrol
39 = 39 Watts
48 = 48 Watts
Ordering Example: LXSM301-48-DT-PC1
LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com
LXSM302
catalog number:
architectural half-moon, Full Cutoff LED Wall Pack
notes:
Benefits & Features
fixture type:
• 40 or 60 Watts Total Driver Consumption
• 100 Lumens per Watt
• Up to 50,000 Rated Life
project:
• 2550 or 5000 Initial Lumens
• 5100K - Color Temperature
• Optional Photocontrol Available
• IP65 Rated
Product Specifications
APPLICATION
Architectural wallpack stylish Radius shape with molded lines to accentuate building
architecture. Provides excellent illumination in several LED wattages.
CONSTRUCTION
The LEDalux LXSM302 Series features a durable, corrosion-resistant, die-cast aluminum
enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is
IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM302 provides ideal
light distribution, and the LEDs are protected by a high-impact, heat resistant tempered
glass lens.
LEDS
The LXSM302 uses a high power LED light engine with a constant current control and a
rated life of up to 50,000 hours with 70% lumen maintenance. Available with either a 30 or
48 watt LED light engine, accepts an input voltage of 120/277VAC and has an operating
temperature range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal
heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and
current controlled to prevent premature failure.
INSTALLATION
The LEDalux LXSM302 Series is ideal for mounting to any vertical surface and features a
rugged die-cast aluminum mounting plate. Can be wired to a 4’’ junction box.
WARRANTY
Any housing component that fails due to manufacturer’s defect is guaranteed for two years
from time of shipment. Light element and driver are warrantied for five years from time of
shipment. Warranty does not apply to damages caused by improper installation, abuse, fire
or acts of God.
7.25"
9"
18.5"
Photometrics
Ordering Information
Model
LED Watts
Volts
Accessories
LXSM302
30 = 30 Watts
DT = 120/277V
PC1 = 120V Photocontrol
48 = 48 Watts
PC2 = 208-277V Photocontrol
Ordering Example: LXSM302-48-DT-PC2
LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com
LXSM303
catalog number:
architectural quarter-sphere, Full Cutoff LED Wall Pack
notes:
Benefits & Features
fixture type:
• 40 or 60 Watts Total Driver Consumption
• 100 Lumens per Watt
• Up to 50,000 Rated Life
project:
• 2550 or 5000 Initial Lumens
• 5100K - Color Temperature
• Optional Photocontrol Available
• IP65 Rated
Product Specifications
Applications
Designed for entry and perimeter lighting from mounting heights of 8-12ft. Use where full
cutoff light control is required. Typical applications are commercial, multi-family and high
end residential locations.
CONSTRUCTION
The LEDalux LXSM303 Series features a durable, corrosion-resistant, die-cast aluminum
enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is
IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM303 provides ideal
light distribution, and the LEDs are protected by a high-impact, heat resistant tempered
glass lens.
LEDS
The LXSM303 uses a high power LED light engine with a constant current control and a
rated life of up to 50,000 hours with 70% lumen maintenance. Available with either a 30 or
48 watt LED light engine, accepts an input voltage of 120/277VAC and has an operating
temperature range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal
heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and
current controlled to prevent premature failure.
INSTALLATION
The LEDalux LXSM303 Series is ideal for mounting to any vertical surface and features a
rugged die-cast aluminum mounting plate. Can be wired to a 4’’ junction box.
9.05"
9.05"
WARRANTY
Any housing component that fails due to manufacturer’s defect is guaranteed for two years
from time of shipment. Light element and driver are warrantied for five years from time of
shipment. Warranty does not apply to damages caused by improper installation, abuse, fire
or acts of God.
Photometrics
18.1"
Approximate Weight: 13 lbs.
Ordering Information
Model
LED Watts
Volts
Accessories
LXSM303
30 = 30 Watts
DT = 120/277V
PC1 = 120V Photocontrol
48 = 48 Watts
PC2 = 208-277V Photocontrol
Ordering Example: LXSM303-48-DT
LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com
LXSM304
catalog number:
architectural half oval, Full Cutoff LED Wall Pack
notes:
Benefits & Features
fixture type:
• 40 or 60 Watts Total Driver Consumption
• 100 Lumens per Watt
• Up to 50,000 Rated Life
project:
• 2550 or 5000 Initial Lumens
• 5100K - Color Temperature
• Optional Photocontrol Available
• IP65 Rated
Product Specifications
APPLICATION
Full cut-off IDA compliant perimeter or entry lighting installations that require high light
output and maximum energy efficiency. LED wallpacks provide low installation costs with
little or no maintenance and great energy savings. Ideal for schools, factories, hospitals,
warehouses and retail applications.
CONSTRUCTION
The LEDalux LXSM304 Series features a durable, corrosion-resistant, die-cast aluminum
enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is
IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM304 provides ideal
light distribution, and the LEDs are protected by a high-impact, heat resistant tempered
glass lens.
LEDS
The LXSM304 uses a high power LED light engine with a constant current control and a
rated life of up to 50,000 hours with 70% lumen maintenance. Available with either a 30 or
48 watt LED light engine, accepts an input voltage of 120/277VAC and has an operating
temperature range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal
heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and
current controlled to prevent premature failure.
9.1"
INSTALLATION
The LEDalux LXSM304 Series is ideal for mounting to any vertical surface and features a
rugged die-cast aluminum mounting plate. Can be wired to a 4’’ junction box.
WARRANTY
Any housing component that fails due to manufacturer’s defect is guaranteed for two years
from time of shipment. Light element and driver are warrantied for five years from time of
shipment. Warranty does not apply to damages caused by improper installation, abuse, fire
or acts of God.
Photometrics
18.1"
9.1"
Approximate
Weight: 15 lbs.
Ordering Information
Model
LED Watts
Volts
Accessories
LXSM304
30 = 30 Watts
DT = 120/277V
PC1 = 120V Photocontrol
48 = 48 Watts
PC2 = 208-277V Photocontrol
Ordering Example: LXSM304-48-PC1
LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com
LXSM352
catalog number:
MINI POLYCARBONATE led Wall Pack
notes:
Benefits & Features
fixture type:
• 14 Watts Total Driver Consumption
• 90 Lumens per Watt
• Up to 50,000 Rated Life
project:
• 650 Initial Lumens
• 4700K - Color Temperature
• Optional Photocontrol Available
• IP65 Rated
Product Specifications
APPLICATION
Entry or perimeter security lighting applications for commercial buildings, shopping centers,
schools, and apartment complexes.
CONSTRUCTION
The LEDalux LXSM352 Series features a durable, vandal-resistant, injection molded
polycarbonate enclosure with an architectural bronze finish. Enclosure is fully sealed and
gasketed, and is IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM352
provides ideal light distribution, and the LEDs are protected by a high-impact, UV stabilized
polycarbonate prismatic refractor.
LEDS
The LXSM352 uses a high power LED light engine with a constant current control and a
rated life of up to 50,000 hours with 70% lumen maintenance. Available with a 10 watt LED
light engine, accepts an input voltage of 120/277VAC and has an operating temperature
range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal heat and
contains no mercury or lead (RoHS compliant). LED circuits are temperature and current
controlled to prevent premature failure.
INSTALLATION
The LEDalux LXSM352 Series is ideal for mounting to any vertical surface and features a
rugged die-cast aluminum mounting plate. Can be wired to a 4’’ junction box, or surface
mounted using the 1/2’’ NPT conduit entry point.
WARRANTY
Any housing component that fails due to manufacturer’s defect is guaranteed for two years
from time of shipment. Light element and driver are warrantied for five years from time of
shipment. Warranty does not apply to damages caused by improper installation, abuse, fire
or acts of God.
11"
7"
5"
Approximate Weight: 4 lbs.
Photometrics
Ordering Information
Model
LED Watts
Volts
Accessories
LXSM352
10 = 10 Watts
DT = 120/277V
PC1 = 120V Photocontrol
PC2 = 208-277V Photocontrol
Ordering Example: LXSM352-10-DT-PC2
LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com
LXSM362
catalog number:
MINI POLYCARBONATE led Wall Pack
notes:
Benefits & Features
fixture type:
• 27 Watts Total Driver Consumption
• 90 Lumens per Watt
• Up to 50,000 Rated Life
project:
• 1700 Initial Lumens
• 4700K - Color Temperature
• Optional Photocontrol Available
• IP65 Rated
Product Specifications
APPLICATION
Entry or single story perimeter lighting for safety, security and identity. Use on commercial
buildings, shopping centers, schools, apartment complexes as well as non-supervised
vandal prone applications.
CONSTRUCTION
The LEDalux LXSM362 Series features a durable, vandal-resistant, injection molded
polycarbonate cover and die-cast aluminum backplate with an architectural bronze finish.
Enclosure is fully sealed and gasketed, and is IP65 Rated. Enclosure and hardware are
corrosion resistant. The LXSM362 provides ideal light distribution, and the LEDs are
protected by a high-impact, UV stabilized polycarbonate prismatic refractor.
LEDS
The LXSM362 uses a high power LED light engine with a constant current control and a
rated life of up to 50,000 hours with 70% lumen maintenance. Available with a 20 watt LED
light engine, accepts an input voltage of 120/277VAC and has an operating temperature
range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal heat and
contains no mercury or lead (RoHS compliant). LED circuits are temperature and current
controlled to prevent premature failure.
INSTALLATION
The LEDalux LXSM362 Series is ideal for mounting to any vertical surface. Can be wired to
a 4’’ junction box, or surface mounted using 1/2’’ NPT conduit entry points.
WARRANTY
Any housing component that fails due to manufacturer’s defect is guaranteed for two years
from time of shipment. Light element and driver are warrantied for five years from time of
shipment. Warranty does not apply to damages caused by improper installation, abuse, fire
or acts of God.
8.67"
5.8"
12.28"
Photometrics
Approximate Weight: 8 lbs.
Ordering Information
Model
LED Watts
Volts
Accessories
LXSM362
20 = 20 Watts
DT = 120/277V
PC1 = 120V Photocontrol
PC2 = 208-277V Photocontrol
Ordering Example: LXSM362-20-DT-PC1
LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com
LXSM765
catalog number:
DECORATIVE, CUTOFF, die-cast aluminum LED Wall Pack
notes:
Benefits & Features
fixture type:
• 14 Watts Total Driver Consumption
• 90 Lumens per Watt
• Up to 50,000 Rated Life
project:
• 650 Initial Lumens
• 4700K - Color Temperature
• Optional Photocontrol Available
• IP65 Rated
Product Specifications
APPLICATION
Perimeter lighting for safety and security. Use on factories, warehouses, self storage,
commercial buildings, etc.
CONSTRUCTION
The LEDalux LXSM765 Series features a durable, die-cast aluminum enclosure with an
architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is
IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM765 provides ideal
light distribution, and the LEDs are protected by a high-impact, heat resistant tempered
glass lens.
LEDS
The LXSM765 uses a high power LED light engine with a constant current control and a
rated life of up to 50,000 hours with 70% lumen maintenance. Available with a 10 watt LED
light engine, the LXSM765 accepts an input voltage of 120/277VAC and has an operating
temperature range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal
heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and
current controlled to prevent premature failure.
8.74"
7.5"
INSTALLATION
The LEDalux LXSM765 Series is ideal for mounting to any vertical surface and features a
hinged design for easy access to internal components. Can be wired to a 4’’ junction box, or
surface mounted using 1/2’’ NPT conduit entry points.
WARRANTY
Any housing component that fails due to manufacturer’s defect is guaranteed for two years
from time of shipment. Light element and driver are warrantied for five years from time of
shipment. Warranty does not apply to damages caused by improper installation, abuse, fire
or acts of God.
8.86"
APPROX. WEIGHT: 8 lbs.
Photometrics
Ordering Information
Model
LED Watts
Volts
Accessories
LXSM765
10 = 10 Watts
DT = 120/277V
PC1 = 120V Photocontrol
PC2 = 208-277V Photocontrol
Ordering Example: LXSM765-10-DT-PC1
LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com
WALL PACK SERIES - LXWPA15L15
catalog number:
notes:
The Wall Pack Series LXWPA15L15 LED area lighting fixture features High
Powered Light Emitting Diodes (LED’s). LED technology, with its inherent
energy efficiency, provides an excellent solution to inefficient, high maintenance
technologies. The solid-state design renders LED’s impervious to electrical and
mechanical shock, vibration, frequent switching and environmental extremes.
With an average life span of 75,000-plus hours, LED’s operate reliably year after
year and are virtually maintenance free.
fixture type:
project:
Applications:
Commercial Buildings
Hospitals
Schools
Security, Pathway and Perimeter Lighting
Product Specifics
Light Source
High Power LED’s
Lumen Output
2000 Lumens
Equivalent Source
70W MH
Color Rendering Index (CRI)
>80
Total Wattage Draw
24W
Operating Temp
-40 degrees to 110 degrees F
Input Voltage
120/277 VAC, 50/60hz
Color Temperature
7.875"
2700K or 6500K
Fixture Weight
10 Lbs.
Beam Angle
120 Degrees
Rated Life
75,000 Hours
Warranty
12"
5 Year Limited
Ratings
CSA-Wet Locations, CE, IP65
11.125"
Benefits & Features
• Die-cast aluminum housing with stainless steel fasteners
• Dark Bronze Finish
• Prismatic Lens Refractor, made of heat and shock resistant borosilicate glass
• Patented Heat-sink Technology
Light Distribution Characteristics
IES Classification
• Instant “on” with no re-strike delay
Longitudinal Classification
• Cold Starting
Cutoff Classification
Type IV
Very Short
Semi-Cutoff
• Solid-State, long-life LED’s
Total Rated Lamp Lumens
• Greater Visibility with Increased Lumen Efficiency
Maximum Candela
• Standard 120/277 VAC input
Maximum Candela Angle
330H 40V
• Shock and Vibration Resistant
Maximum Candela At 90˚
Vertical 98 (2.54% Lamp Lms)
• Significant Operational Savings - 80% Over HID
Maximum Candela At 80˚
Vertical 137 (3.55% Lamp Lms)
• Energy Efficient and Maintenance-Free for over 5 years
• LED life is more than five times that of HPS
• Eco-Friendly, Eliminate Hazardous Disposal
• Reduced Light Trespass - Dark Sky Compliant
• CSA: Listed for wet locations
• IP65 for wet locations
Product Information
Model
Kelvin Temp
Options
LXWPA15L15
2700K
WG = Wire Guard
6500K
PC1 = Button PhotoCell 120V
PC2 = Button PhotoCell 277V
Ordering Example: LXWPA15L15-2700K-PC1
Downward Total Efficiency
2000
210
14.1%
WALL PACK SERIES - LXWPA15L48
catalog number:
notes:
The Wall Pack Series LXWPA15L48 LED area lighting
features High
Powered Light Emitting Diodes (LED’s). LED technology, with its inherent
provides an excellent solution to
high maintenance
energy
technologies. The solid-state design renders LED’s impervious to electrical and
mechanical shock, vibration, frequent switching and environmental extremes.
With an average life span of 75,000-plus hours, LED’s operate reliably year after
year and are virtually maintenance free.
fixture type:
project:
Applications:
Commercial Buildings
Hospitals
Schools
Security, Pathway and Perimeter Lighting
Product Specifics
Light Source
High Power LED’s
Lumen Output
3860 Lumens
Equivalent Source
150W MH
Color Rendering Index (CRI)
>80
Total Wattage Draw
48W
Operating Temp
-40 degrees to 110 degrees F
Input Voltage
120/277 VAC, 50/60hz
Color Temperature
2700K or 6500K
Fixture Weight
7.875"
12 Lbs.
Beam Angle
120 Degrees (x)
Rated Life
75,000 Hours
Warranty
12"
5 Year Limited
Ratings
CSA-Wet Locations, CE, IP65
Benefits & Features
• Die-cast aluminum housing with stainless steel fasteners
11.125"
• Dark Bronze Finish
• Prismatic Lens Refractor, made of heat and shock resistant borosilicate glass
• Patented Heat-sink Technology
Light Distribution Characteristics
IES
• Instant “on” with no re-strike delay
• Cold Starting
Longitudinal
• Solid-State, long-life LED’s
Cutoff
Type IV
Very Short
Semi-Cutoff
• Greater Visibility with Increased Lumen
Total Rated Lamp Lumens
• Standard 120/277 VAC input
Maximum Candela
• Shock and Vibration Resistant
Maximum Candela Angle
330H 40V
Maximum Candela At 90˚
Vertical 98 (2.54% Lamp Lms)
Maximum Candela At 80˚
Vertical 137 (3.55% Lamp Lms)
•
Operational Savings - 80% Over HID
• Energy
and Maintenance-Free for over 5 years
• LED life is more than
times that of HPS
Downward Total
• Eco-Friendly, Eliminate Hazardous Disposal
3860
275
14.1%
• Reduced Light Trespass - Dark Sky Compliant
• CSA: Listed for wet locations
• IP65 for wet locations
Product Information
Model
Kelvin Temp
Options
LXWPA15L48
2700K
WG = Wire Guard
6500K
PC1 = Button PhotoCell 120V
PC2 = Button PhotoCell 277V
Ordering Example: LXWPA15L48-2700K-PC1
LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com
WALL PACK S ERIES - LXWPA15L60
catalog number:
notes:
The Wall Pack Series LXWPA15L60 LED area lighting
features High
Powered Light Emitting Diodes (LED’s). LED technology, with its inherent
provides an excellent solution to
high maintenance
energy
technologies. The solid-state design renders LED’s impervious to electrical and
mechanical shock, vibration, frequent switching and environmental extremes.
With an average life span of 75,000-plus hours, LED’s operate reliably year after
year and are virtually maintenance free.
fixture type:
project:
Applications:
Commercial Buildings
Hospitals
Schools
Security, Pathway and Perimeter Lighting
Product Specifics
Light Source
High Power LED’s
Lumen Output
6100 Lumens
Equivalent Source
250W MH
Color Rendering Index (CRI)
>80
Total Wattage Draw
62W
Operating Temp
-40 degrees to 110 degrees F
Input Voltage
120/277 VAC, 50/60hz
Color Temperature
7.875"
2700K or 6500K
Fixture Weight
14 Lbs.
Beam Angle
120 Degrees (x)
Rated Life
12"
75,000 Hours
Warranty
5 Year Limited
Ratings
CSA-Wet Locations, CE, IP65
Benefits & Features
11.125"
• Die-cast aluminum housing with stainless steel fasteners
• Dark Bronze Finish
• Prismatic Lens Refractor, made of heat and shock resistant borosilicate glass
• Patented Heat-sink Technology
Light Distribution Characteristics
IES
• Instant “on” with no re-strike delay
Longitudinal
• Cold Starting
Cutoff
• Solid-State, long-life LED’s
Type IV
Very Short
Semi-Cutoff
• Greater Visibility with Increased Lumen
Total Rated Lamp Lumens
• Standard 120/277 VAC input
Maximum Candela
• Shock and Vibration Resistant
Maximum Candela Angle
330H 40V
•
Maximum Candela At 90˚
Vertical 98 (2.54% Lamp Lms)
Maximum Candela At 80˚
Vertical 137 (3.55% Lamp Lms)
Operational Savings - 80% Over HID
• Energy
and Maintenance-Free for over 5 years
• LED life is more than
times that of HPS
Downward Total
6100
345
14.1%
• Eco-Friendly, Eliminate Hazardous Disposal
• Reduced Light Trespass - Dark Sky Compliant
• CSA: Listed for wet locations
• IP65 for wet locations
Product Information
Model
Kelvin Temp
Options
LXWPA15L60
2700K
WG = Wire Guard
6500K
PC1 = Button PhotoCell 120V
PC2 = Button PhotoCell 277V
Ordering Example: LXWPA15L60-2700K-PC1
LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com
a Division of Mule Lighting, inc.
46 Baker St. Providence, RI 02905
toll free: 800.556.7690
tel: 401.941.4446
fax: 401.941.2929
info@ledalux.com
www.ledalux.com
LEDalux, a Division of Mule Lighting, Inc. is committed
to growth through the continued advancement of LED
technology. Our products will significantly reduce energy
consumption and provide superior lighting solutions to
the global lighting market.