G .S H DS L Bi s , E F M LA N E x t e n s i o n
ETHERNET 802.3AH SHDSL BIS/EFM
Benefits
• Ethernet bridge over 4 or
8 telephone copper pairs
• High data rate, symmetrical 11,4 Mbps on 1 pair,
45 Mbps on 4 pairs and
90 Mbps on 8 pairs
• SHDL Bis, UIT-T
G.991.2 Standard
• Automatic rate adaptation
from 192 kbps to
90 Mbps according
to the line quality
• Distance up to 8 km
• Bonding : EFM, IEEE
802.3ah
• Three Ethernet
10/100 interfaces
• Ethernet, 802.1d bridge
• Per port VLAN and
802.1q
• QoS and traffic prioritization
• Spanning Tree, 802.1d
• Management : Web interface, http / https, ssh,
and local console port
• Remote management in
IP and out of band supervision through EOC
channel
• Industrial compact and
economic solution
• Rack card for 19’’ chassis
• 48Vdc and 110/230Vac
mains supply options
SpeederLan-Bis is an enterprise network access unit that provides high
rate connection over one and up to
eight telephone copper pairs. It operates as a manageable Ethernet
bridge with VLAN capabilities. It complies to the ITU-T G.991.2, G.SHDSL
Bis standard with a 11.4 Mbps
throughput per pair in both directions. It performs up to 90 Mbps over
eight pairs with EFM, Ethernet First
Mile, IEEE 802.3ah standard.
SpeederLan-Bis offers a very high
Ethernet throughput that suits the
requirements of Hot-Spot access, 3G
BTS interconnection, etc.
SpeederLan-Bis offers a maximum
rate of 90 Mbps or a maximum distance of 8 km over existing 0.4mm /
AWG26 copper pairs. Three Ethernet
ports connect to the LAN and terminal equipments.
SpeederLan-Bis management is
very flexible and secure. Most management is done through intuitive
Web pages in http / https. It can be
supervised through snmp. Access
is secured through password policy
and secured protocols – ssh and
https. The equipment provides also
a local console port and a Syslog
service.
SpeederLan-Bis is suitable for any
professional environment. It comes
as a metallic compact and robust
device powered from either a 110230 Vac mains or a 48 Vdc input.
As a rack mount card, it can fit in
an AMS4 or AMS16, 19’’ chassis.
The AMS16 chassis supports 16
device slots, 2 power supply slots
and one slot for a centralized management card with TCP-IP, SNMP
protocols.
SpeederLan-Bis is a high performance Ethernet bridge that operates
in point to point, or multipoint or
even ring topology in group of 4
pairs.
SpeederLan-Bis is a fully featured bridge with per port and
802.1q VLAN. Quality of service
and traffic prioritization is controlled from the DSCP field of
the IP frames.
Point to point
or
multi point
connections
SpeederLan-Bis interconnects Ethernet networks and terminals through four or
eight telephone copper pairs. It is an Ethernet bridge that operates in point to
point or multipoint mode. It offers a maximum throughput of 90 Mbps and a
maximum distance of 8 km.
Page 2
G.SHDSL Bis, EFM LAN Extension
TECHNICAL SPECIFICATIONS
SHDSL interface
 G.SHDSL Bis, UIT-T G.991.2 Annex A/B,
ETSI TS-101524
 11.4 Mbps symmetrical rate per pair
 4 pairs mode : bonding EFM, IEEE
802.3ah
 4 pairs group trunking : 802.3ad
 Code : TC-PAM 16/32/64
 Media : 4/8 pairs with metallic continuity
 Line rate : 192 kbps to 11.4 Mbps per
pair
 Impedance : 135 Ohms
 Connector : RJ45
Ethernet interfaces
 3 Ethernet ports, 10/100 BaseT
 RJ45 connectors
 Automatic speed : 10/100
 Auto MDI/MDI-X
Smart Solutions for
Smart Networks
www.cxr.com
Ethernet bridge
 Ethernet bridge, 802.1d
 Frame memory : 512 Ko
 MAC address memory : 1 K@
 Aging : 300 s
 Per port VLAN and 802.1q VLAN
 Spanning Tree : 802.1d
 Frame size : 1536
 QoS and traffic prioritization : DSCP
 Rate limiting
Management
 Web, http / https interface
 ssh
 ftp : backup and editing of the configuration file
 snmp v1/v2
 Syslog : critical event report
 Log of critical events
 Local and remote management in tcp-ip
 Local console port
 Extended status and statistics of interfaces and protocols
Light indicators
 Power
 CD1-8 : SHDSL line activation
 ACT : frame transmission on the Ethernet
interfaces
 100 : 100 Mbps speed of the Ethernet
interfaces
Power supply
 Unit power consumption : 15 W
 48Vdc input : 36-72 Vdc
 Mains input : 110 / 230 Vac
General characteristics
 Size (DxWxH): 260 x 160 x 35 mm
 Weight : 0,9 kg
 Operating temperature : -10 à +60°C
 Hygrometry : 10 to 90%, non condensing
 MTBF : 150 000 H
 Safety : EN-60950
 EMC : EN-55022, EN-55024
DSL range: no noise conditions, AWG26 , 0.4mm
Distance over 0,4mm / AWG26 pair
Rate on 1 pair (kbps)
Distance (km / miles)
192
7.2 / 4.5
512
1 280
2 048
5.8 / 3.6
5 / 3.1
4.4 / 2.7
3 072
3.8 / 2.4
4 608
2.9 / 1.8
5 696
2.6 / 1.6
11.4 Mbps
1 / 0.6
RANGE OF PRODUCTS
SpeederLan-Bis –4-C : standalone unit with 48 Vdc supply, 3 Eth, 4 SHDSL Bis pairs, 45 Mbps
SpeederLan-Bis –4-U/I : standalone unit with 110/230 Vac supply, 3 Eth, 4 SHDSL Bis pairs, 45 Mbps
SpeederLan-Bis –4-R : rack card for AMS16 chassis, 3 Eth, 4 SHDSL Bis pairs, 45 Mbps
CXR Anderson Jacobson
Rue de l'Ornette
28410 Abondant - France
T +33 (0) 237 62 87 90
F +33 (0) 237 62 88 01
email: contact@cxr.com
SpeederLan-Bis –8-C :
SpeederLan-Bis –8-U/I :
SpeederLan-Bis –8-R :
SpeederLan-Bis –2*2-R :
standalone unit with 48 Vdc supply, 3 Eth, 8 SHDSL Bis pairs, 90 Mbps
standalone unit with 110/230 Vac supply, 3 Eth, 8 SHDSL Bis pairs, 90 Mbps
rack card for AMS16 chassis, 3 Eth, 8 SHDSL Bis pairs, 90 Mbps
rack card for AMS16 chassis, 3 Eth, 2x2 SHDSL Bis pairs, 2x11.4 Mbps
CXR Anderson Jacobson reserves its rights to modify the specifications without notice.
This document is not a contractual document