FOSC 450
Gel-Sealed Fiber Optic Splice Closure
ORDERING GUIDE
For more information or to place an order,
please contact Supply Solutions at
866-978-7759.
Courtesy of Tyco Corporation.
Welcome to the FOSC 450 Fiber Optic Splice Closure Ordering Guide.
This Guide is designed to provide you with the information you need to
specify and purchase FOSC 450 splice closures and
accessories you need for your ber network.
FOSC 450 ber optic splice closures are used worldwide!
Please note that this ordering guide is designed for FOSC 450
closures as they are congured for North America, Mexico, the Caribbean,
and Central America. For information regarding FOSC 450 closures for other areas
of the world, please refer to www.telecomosp.com or contact your local sales or
customer service representative.
Information subject to change. For the latest information, see the FOSC 450 Closure Ordering Guide at:
http://media.telecomosp.com/downloads/pdf/US/Fiber/og/fosc450og.pdf
Table of Contents
PRODUCT INTRODUCTION
Closure Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FOSC 450 Closure Family. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Splice Capacities and Characteristics Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical Closure Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
5
6
7
ORDERING INFORMATION
Ordering Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Description and Ordering Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Commonly Requested Kit Congurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Commonly Requested Accessory Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
FOSC 450 CLOSURE ACCESSORIES
General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cable Termination Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cable Sealing Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Splice Tray Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Fiber Management and Routing Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Slack Storage Basket Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Grounding Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Closure Mounting Hardware Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Splitters Description Key and Product List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
CWDM’s Description Key and Product List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Passives: CWDM Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Miscellaneous Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
ADDITIONAL FOSC CLOSURE PRODUCTS
Introduction to Additional FOSC Closure Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
FOSC Closure Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ENGINEERING INFORMATION
Engineering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Closure Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
FOSC 450 Closure Family Assembly Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Splice Tray Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
FOSC Fiber Optic Splice Closures Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
FOSC 450
Fiber Optic Splice Closures
A family of closures designed for
your fiber network needs!
FOSC 450 ber optic splice closures are a
family of single-ended closures designed for
use most anywhere there are ber splicing and
storage needs.
These closures are available in ve sizes,
each featuring:
• Re-usable compressed gel cable sealing
components that accommodate a wide range
of cable sizes
• Capability to accommodate a variety of cable
styles including loose tube or central core
tube cables with single or ribbon bers
• Hinging splicing trays that provide controlled
access to splices and slack storage
• Splice and storage compartments accessible
via a removable dome-clamp system
• Thermoplastic outer materials that withstand
temperature and contaminate extremes
• Slack storage baskets of various sizes that
provide different slack storage scenarios
• Many shared components between closure
sizes
• A range of accessories for a variety of outside
plant needs
FOSC 450 Closure Family
450 A
450 C
Smallest of the FOSC 450 closure
family.
• 4 cable entry ports, each with multi-cable
capability
• 96 single ber/144 mass splice capacity
• 19" long by 8" diameter*
• Capacity of up to 8 drop cables in
addition to a feed-through cable
• Compact size for FTTH applications
• Accessories available for a wide variety
of applications
Combining the well accepted
FOSC 450 D closure with a short
overall length (23"), the 450 C
ts applications where increased
splice capacity and small size are
a must:
• 6 cable entry ports, each with multicable capability
• 192 single ber/864 mass splice
capacity
• 23" long by 11.5" diameter*
• Capacity of up to 16 drop cables in
addition to a feed-through cable
• Wide-style splice tray
• Accessories available for a wide variety
of applications
• Field upgradeable to the 450D size
450 B Short
One of the smaller 450 closures.
• 6 cable entry ports, each with multicable capability
• 144 single ber/288 mass splice capacity
• 19" long by 9.2" diameter*
• Uses A size splice trays
• Capacity of up to 16 drop cables in
addition to a feed-through cable
• Fits applications requiring large splice
capacity in a small size
• Accessories available for a wide variety
of applications
450 B
The mid-size FOSC 450 closure.
• 6 cable entry ports, each with multicable capability
• 144 single ber/288 mass splice capacity
• Increased slack storage capacity over
the B Short closure
• 24" long by 9.8" diameter*
• Capacity of up to 16 drop cables in
addition to a feed-through cable
• Accessories available for a wide variety
of applications
450 D
The largest of the FOSC 450
closure line, the 450 D is capable
of handling a wide range of ber
closure needs:
• 6 cable entry ports, each with multicable capability
• 576 single ber/1152 mass splice
capacity
• 30" long by 11.5" diameter*
• Wide-splice tray
• Accessories available for patching,
rehabilitation and a wide variety
of applications
• Capacity of up to 16 drop cables in
addition to a feed-through cable
* Diameter measurements are based on the widest diameter points and include the clamp
hinge and latching mechanisms. Diameters of the clamps not including the hinge and
latch are approximately 1 inch less.
Closure Capacities & Characteristics
These charts represent the capacities of each of the FOSC 450 closure sizes. Capacities may vary due to application variables, such
as the amount of slack storage required.
Single Fiber Application
0
96
144
192
288
576
Ribbon Application Using Ribbon Trays
0
144
288
432
864
1152
Characteristics Chart
Type/Size
1
Closure Size (inches)
Approx. Closure Weights (lbs)
Closure Capacity
End-to-End Splicing
Single Splice (SM6 Modules)
Single Splice (SM12 Modules)2
Mass Fusion Splice
Mid-Sheath Splicing
Single Splice
Mass Fusion Splice
Trays Per Closure
Standard Trays
Ribbon Trays
Single Fiber Splice Capacity per Tray
SM6 Modules
SM12 Modules2
FIST Modules2
Patching
Tray (quantity/type)
Basket (quantity/type)
Sealing System
Closure Dome-to-Base or
Top-to-Bottom
Cable Capacity
Butt (std./max.)
Inline (std./max.)
Fire Retardant Closure Available
Tools Required
1
D6
C6
B6
BS
A4
11.5 dia. 30 L
20
11.5 dia. 23 L
16
9.8 dia. 24 L
13
9.2 dia. 19 L
10
8 dia. 19 L
6
288
576
1152
96
192
864
72
144
288
72
144
144
48
96
144
576
864
192
432
144
288
144
288
72
216
8 5 / 63 / 54
4 5 / 33 / 24
85 / 6 3 / 5 4
45 / 33 / 24
65 / 63 / 44
35 / 33 / 24
65 / 6 3 / 2 4
33
45 / 3 3 / 2 4
13
36
72
96
12
24
n/a
12
24
n/a
12
24
n/a
12
24
n/a
Yes
(12,16/sc)
Yes
(4/all, 8/sc)
No
Yes
(12,16/sc)
Yes
(4/all, 8/sc)
No
No
Yes
(4/all, 8/sc)
Yes
(4/all, 8/sc)
“O” Ring/
Clamp
“O” Ring/
Clamp
“O” Ring/
Clamp
“O” Ring/
Clamp
“O” Ring/
Clamp
6 / 167 / 218
n/a
6 / 167 / 218
n/a
6 / 167 / 218
n/a
6 / 167 / 218
n/a
4 / 107 / 138
n/a
No9, 10
No9
No9, 10
No9
No9
Can Wrench,
Snips
Can Wrench,
Snips
Can Wrench,
Snips
Snips
Can Wrench
Snips
Closure length (“L”) plus 10X largest cable diameter installed equals the overall length required for handhole.
Maximum dimensions includes clamp and cable sealing.
2
SMOUV splice protection sleeves should be used.
3
With standard basket.
4
With tall basket.
5
Flexible sock is used for LBT storage.
.
No
6
The ribbon tray can also be congured with 12 SC adapters for patching and provide 12 single splice capacity.
If using the 3-cable Multicable kit, 3 at or 3 round cables per port if cable does not exceed <0.25” diameter
If using the 4-cable Multicable kits and combined cables do not exceed 1” diameter.
9
Fire Retardant bag or blanket options.
10
Fire Retardant closures available in FOSC 400 family.
7
8
Typical Closure Kit Contents
Typical Closure
Kit Contents
include:
• Dome
• Clamp
• O-ring
• Base
• Gel sealing block with compression
trigger
• Plugs for unused cable ports
• Tray tower to hold hinging FOSC splice
trays
• FOSC splice trays (quantity according
to the ordering description)
• Cable retention hardware (quantity
according to the ordering description)
• Miscellaneous hardware, including ber
routing (transportation) tubing, cable
retention clamps, strength member
retainers, etc.
• Installation Instructions
Dome
The dome is made from a
polymer, with ribbing added for extra
strength. Five different sizes are available (A, BS, B6, C6, D6), matching the
ve closure sizes in the family.
Base
The base houses the gel block cable
sealing system and is the foundation
for the tray tower and cable attachment/
retention hardware.
Gel Block with
Trigger
The gel block provides the sealing
mechanism for cables entering the
closure. Available with six cables entry
ports (450 B, BS, C or D) or four (450 A
size only). (Not Sold Separately)
Dome to Base
Seal
Domes are attached to the base by
means of a clamp. Dome-to-base sealing
is accomplished via a compressed O-ring.
Cable Retention
Hardware
Cable strain relief and strength member
termination hardware.
Ordering Information
Making the information work for you.
FOSC 450 ber optic splice closures can
be ordered in a variety of congurations to
maximize efciency and minimize up front cost.
The following pages provide closure choices
and the steps to be followed when specifying
FOSC 450 closure congurations.
In addition, we have supplied a list of commonly
requested closure congurations.
8
Ordering FOSC 450 Fiber Optic Splice Closures
Follow the steps to choose the desired closure. Then simply match the step to the
description key.
Closure Size: A4, BS (B Short), B6, C6, or D6
Termination Hardware Quantity for the Kit: 2, 4, or 6
Capacity and Type of Splice Tray
See Quick Reference Guide in the back of
this catalog for additional details
Quantity of Splice Trays Factory Installed
(Choose either “0” trays (no trays installed) or “1” tray installed.
Additional trays sold separately.)
Slack Basket Type
Feed-through Ground Quantity
Whether Flash Test Valve is Desired
(Valved version is standard.)
Description Key:
FOSC 450 - XX - X - XX - X - XXX
Closure Size (inches)
Valve for Flash Testing
A4
BS
B6
C6
D6
V - Valve (standard)
N - No Valve
Note: We recommend ash test valves for FOSC
closures. However, non-valved closures are available
upon request.
-
4 cable entry ports; 8 dia. x 19 long
6 cable entry ports; 9 dia. x 19.5 long
6 cable entry ports; 10 dia. x 24 long
6 cable entry ports; 11.5 dia. x 23 long
6 cable entry ports; 11.5 dia. x 30 long
Termination Hardware
Quantity for the Kit
2
4
6
- 2 cable attachments included
- 4 cable attachments included
- 6 cable attachments included (N/A for A size)
Capacity and Type of Splice Tray
NT
12
24*
36
72*
R1
-
No tray installed in factory
A, B, or C tray with two SM6 splice modules
A, B, or C tray with two SM12 splice modules
D tray with six SM6 splice modules
D tray with six SM12 splice modules
A, B size ribbon tray
(accommodates 12 ribbons/144 bers)
R2 - D size ribbon tray(24 ribbons/288 bers)
R3 - C size ribbon tray(18 ribbons/216 bers)
SF - Stackable single fusion trays (12 splices)
*Note: SMOUV (1120-01-US) splice protection
sleeves are highly recommended for use with
SM12 splice modules.
Quantity of Splice Trays Factory Installed
0 or 1 is standard
(Choose either “0” trays (no trays installed) or “1” tray
installed. Additional trays sold separately.)
Number of Ground Feed-through Lugs
0 - No grounding
1 - 1 ground feed-through lug (A4 only, N/A for BS)
3 - 3 ground feed-through lugs (B6, C6, and D6 closures
only, N/A for BS)
6 - 6 ground feed-through lugs (C6 and D6 closure only,
N/A for BS)
Note: FEG and MEG kits provide optional ground
isolation for FOSC 450 closures.
Slack Basket Type
N
A
B
C
D
E
-
No Basket
A4 Standard Size
B6, BS Standard Size
C6 Standard Size
D6 Standard Size
Special Bulkhead Basket arrangement for
B, BS closures only
T - Tall Size
S - Stackable Trays in D Closure
Note: D-size closures with “N” option include backbone
used to route ribbons to ribbon trays. A and B-size
closures include storage “sock.”
Commonly Requested Closure Kits
In order to provide customers with cost and inventory efficient options, FOSC 450 fiber optic splice closures are classified in three categories as shown
below:
A: Basic kits. Lower comparable cost. Lowest targeted lead time.
B: Standard kits. Includes splice tray, basket, and grounding options.
C: Non-standard kits. Contact your local salesperson for further information.
Class A List
FOSC 450A
FOSC 450B Short
FOSC 450B
FOSC 450C
FOSC 450D
FOSC450-A4-4-NT-0-A1V
FOSC450-BS-6-NT-0-B0V
FOSC450-B6-6-NT-0-B3V
FOSC450-C6-6-NT-0-C6V
FOSC450-D6-6-NT-0-D6V
Class B List
FOSC 450A
FOSC 450BS
FOSC 450B
FOSC 450C
FOSC 450D
FOSC450-A4-4-12-1-A0V
FOSC450-BS-6-12-1-B0V
FOSC450-B6-6-12-1-B0V
FOSC450-C6-6-12-1-C0V
FOSC450-D6-6-36-1-D0V
FOSC450-A4-4-12-1-A1V
FOSC450-BS-6-12-1-T0V
FOSC450-B6-6-12-1-B3V
FOSC450-C6-6-12-1-C3V
FOSC450-D6-6-36-1-D3V
FOSC450-A4-4-24-1-A0V
FOSC450-BS-6-24-1-B0V
FOSC450-B6-6-24-1-B0V
FOSC450-C6-6-12-1-C6V
FOSC450-D6-6-36-1-D6V
FOSC450-A4-4-24-1-A1V
FOSC450-BS-6-24-1-T0V
FOSC450-B6-6-24-1-B3V
FOSC450-C6-6-24-1-C0V
FOSC450-D6-6-72-1-D0V
FOSC450-A4-4-NT-0-A0V
FOSC450-B6-6-NT-0-B0V
FOSC450-C6-6-24-1-C3V
FOSC450-D6-6-72-1-D3V
FOSC450-A4-4-R1-1-A0V
FOSC450-B6-6-R1-1-B0V
FOSC450-C6-6-24-1-C6V
FOSC450-D6-6-72-1-D6V
FOSC450-A4-4-R1-1-A1V
FOSC450-B6-6-R1-1-B3V
FOSC450-C6-6-NT-0-C0V
FOSC450-D6-6-NT-0-D0V
FOSC450-A4-4-NT-0-T0V
FOSC450-B6-6-NT-0-T0V
FOSC450-C6-6-R3-1-C0V
FOSC450-D6-6-R2-1-D0V
FOSC450-A4-4-NT-0-T1V
FOSC450-B6-6-NT-0-T3V
FOSC450-C6-6-R3-1-C3V
FOSC450-D6-6-R2-1-D3V
FOSC450-C6-6-R3-1-C6V
FOSC450-D6-6-R2-1-D6V
FOSC450-C6-6-NT-0-T0V
FOSC450-D6-6-NT-0-T0V
FOSC450-C6-6-NT-0-T6V
FOSC450-D6-6-NT-0-T6V
Class C List
All other closure congurations are available as Class C products. Contact your salesperson for further information.
Information subject to change. For the latest information, see the FOSC 450 Closure Ordering Guide at:
http://media.telecomosp.com/downloads/pdf/US/Fiber/og/fosc450og.pdf
Commonly Requested Accessory Kits
Splice Trays:
FOSC 450 Fiber Optic Splice Closures are accompanied by a wide variety of splice trays and tray accessories including those for storing single and/or ribbon (mass) fusion
splices, ribbon splices with ribbon slack on the same tray, and patching trays.
Multi-Cable Sealing Accessories:
FOSC 450 closures can accommodate multiple cables entering a cable entry port by utilizing multi-cable sealing kits. Several styles of multi-cable kits are available.
Mounting Hardware:
Many mounting hardware options are available for mounting closures in the various outside plant environments.
Slack Storage Baskets:
Closures are typically supplied with standard size slack storage baskets. Tall version baskets (for storing additional slack) are also available.
Splitters and WDM’s:
A wide range of splitters and CWDM’s are available, whether on FOSC trays or eld installable.
See the Accessories section, pages 12 through 23, for additional details!
Accessories
Extras that make your job easier
While each FOSC 450 closure kit comes
outtted with components needed for
installation, a full line of accessories is also
available…from splice trays, to multi-cableper-port sealing kits, to a range of mounting
hardware options…to meet your splice closure
needs.
The following is a listing of the most commonly
requested accessories, categorized for your
convenience. Additional accessories are also
available.
If you are unable to locate an accessory
you need, please check our web site:
www.us.telecomosp.com, or contact your
local salesperson or our Customer Service
team for additional information.
12
Cable Termination Accessories
Closure
Size
A Only
Part
Number
Description
Cables
Grounding
Hardware
D20592-000
FOSC-ACC-450-A-CBLTERM
1 Port
No
450 A Cable
Retention Plate
Kits/
Pkg.
Kit Contents
Cable retention hardware,
strength member retention
hardware
5
A Only
C67369-000
FOSC-ACC-450-A-CBLTERM-G 1 Port
Yes
Cable retention hardware;
strength member retention
hardware
BS Only
D25359-000
FOSC450-CABLE-TERM-4-BS
4 Ports
No
4 sets each: cable retention
hardware (with hose clamps),
strength member retention
hardware
1
B, C, D
F67166-000
FOSC450-CABLE-TERM-2-N
2 Ports
No
2 sets each: cable retention
hardware (with hose clamps),
strength member retention
hardware
1
B, C, D
C61629-000
FOSC450-CABLE-TERM-2-G
2 Ports
Yes
2 sets each: cable retention
hardware (with hose clamps),
strength member retention
hardware; ground wires
1
5
450 BS, B, C, D
Cable Retention Plate
B version shown
B, C, D
558850-000
FOSC450-CABLE-TERM-4-N
4 Ports
No
4 sets each: cable retention
hardware (with hose clamps),
strength member retention
hardware
1
B, C, D
659136-000
FOSC450-CABLE-TERM-4-G
4 Ports
Yes
4 sets each: cable retention
hardware (with hose clamps),
strength member retention
hardware, ground wires
1
Closure Sealing Accessories
Closure
Size
Cables
Sealed1
Key Sealing
Components
Part Number
Description
Kits/Pkg
Multiple Cables/Drop Cables per Port Seals
All
3
All
4
All
4
Quick Install Gel Plug
Gel Tape Wrap
Quick Install Gel Plug
A38215-000
40606V-000
41606V-000
E21473-000
XJ261N-000
1F6818-000
FAK-MULDRP-45-3-DRP
FAK-MULDRP-45-3/CBL-ATT*
FAK-MULDRP-45-4-DRP
FAK-MULDRP-45-4/CBL-ATT*
FAK-MULDRP-45-4P-DRP
FAK-MULDRP-45-4P/CBL-ATT*
10
10
10
10
10
10
A05721-000
FOSC-ACC-450-PORT-PLUGS
50
FOSC-ACC-400AB-450A-ORIN
FOSC-ACC-450-BS-ORING
FOSC-ACC-450-B-ORING
FOSC-ACC-D-O-RING-SEAL
FOSC-ACC-D-O-RING-SEAL
5
5
5
5
5
3-Cable Seal with Cable
Attachment Kit (assembled)
Port Plugs (used to plug empty cable ports)
All
N/A
Port Plug
Replacement O-Rings (fits between done and base)
450A
450BS
450B
450C
450D
1
N/A
N/A
N/A
N/A
N/A
O-Ring
O-Ring
O-Ring
O-Ring
O-Ring
381107-000
HG302N-000
A51343-000
429631-000
429631-000
Combined cable diameters must be within cable port size requirements.
*Cable Attachments Included
4-Cable Seal with Cable
Attachment Kit
Splice Tray Accessories
• Variety of splice trays, capacities, options
• Single and Ribbon ber styles
Tray
Capacity
12
12
Includes
SMOUV
Protection
Sleeve
No
Yes
A
A
24*
24
BS
BS
Closure
Size
A
A
Part Number
497817-000
HL0017-000
Description
FOSC-ACC-A-TRAY-12
FOSC-ACC-A-TRAY-12-SMV60
No
Yes
429567-000
EB063E-000
FOSC-ACC-A-TRAY-24
FOSC-ACC-A-TRAY-24-SMV60
12
12
No
Yes
497817-000
HL0017-000
FOSC-ACC-A-TRAY-12
FOSC-ACC-A-TRAY-12-SMV60
BS
BS
24*
24
No
Yes
429567-000
EB063E-000
FOSC-ACC-A-TRAY-24
FOSC-ACC-A-TRAY-24-SMV60
B
B
12
12
No
Yes
898849-000
G68315-000
FOSC-ACC-B-TRAY-12
FOSC-ACC-B-TRAY-12-SMV60
B
B
24*
24
No
Yes
863927-000
Z75279-000
FOSC-ACC-B-TRAY-24
FOSC-ACC-B-TRAY-24-SMV60
C
C
12
12
No
Yes
RH0198-000
X35373-000
FOSC-ACC-C-TRAY-12
FOSC-ACC-C-TRAY-12-SMV60
C
C
24*
24
No
Yes
RH0202-000
C4388W-000
FOSC-ACC-C-TRAY-24
FOSC-ACC-C-TRAY-24-SMV60
D
D
D
00
36
36
No
No
Yes
122131-000
426579-000
DK696L-000
FOSC-ACC-D-TRAY-00
FOSC-ACC-D-TRAY-36
FOSC-ACC-D-TRAY-36-SMV60
D
D
D
48
72*
72
No
No
Yes
579575-000
915167-000
JL0937-000
FOSC-ACC-D-TRAY-48
FOSC-ACC-D-TRAY-72
FOSC-ACC-D-TRAY-72-SMV60
D
96
Yes
F10669-000
FOSC-ACC-D-TRAY-96-S60
* Tyco Electronics SMOUV splice sleeves highly recommended for use with these trays.
Kit Includes
Tray & clear cover with 2 SM-6 splice modules, tie-wraps, instructions
Tray & clear cover with 2 SM-6 splice modules, 12 60MM SMOUV
splice protection sleeves, tie-wraps, instructions
Tray & clear cover with 2 SM-12 splice modules, tie-wraps, instructions
Tray & clear cover with 2 SM-12 splice modules, 25 60MM SMOUV
splice protection sleeves, tie-wraps, instructions
Tray & clear cover with 2 SM-6 splice modules, tie-wraps, instructions
Tray & clear cover with 2 SM-6 splice modules, 12 60MM SMOUV
splice protection sleeves, tie-wraps, instructions
Tray & clear cover with 2 SM-12 splice modules, tie-wraps, instructions
Tray & clear cover with 2 SM-12 splice modules, 25 60MM SMOUV
splice protection sleeves, tie-wraps, instructions
Tray & clear cover with 2 SM-6 splice modules, tie-wraps, instructions
Tray & clear cover with 2 SM-6 splice modules,12 60MM SMOUV
splice protection sleeves, tie-wraps, instructions
Tray & clear cover with 2 SM-12 splice modules tie-wraps, instructions
Tray & clear cover with 2 SM-12 splice modules, 25 60MM SMOUV
splice protection sleeves, tie-wraps, instructions
Tray & clear cover with 2 SM-6 splice modules, tie-wraps, instructions
Tray & clear cover with 2 SM-6 splice modules, 12 60MM SMOUV
splice protection sleeves, tie-wraps, instructions
Tray & clear cover with 2 SM-12 splice modules, tie-wraps, instructions
Tray & clear cover with 2 SM-12 splice modules, 25 60MM SMOUV
splice protection sleeves, tie-wraps, instructions
Tray & clear cover, no splice modules. Includes tie-wraps, instructions.
Tray & clear cover with 6 SM-6 splice modules, tie-wraps, instructions
Tray & clear cover with 6 SM-6 splice modules, 40 60MM SMOUV
splice protection sleeves, tie-wraps, instructions
Tray & clear cover with 6 SM-8 splice modules, tie-wraps, instructions
Tray & clear cover with 6 SM-12 splice modules, tie-wraps, instructions
Tray & clear cover with 6 SM-12 splice modules, 75 60MM SMOUV
splice protection sleeves, tie-wraps, instructions
Tray & clear cover with 8 FIST style splice modules, 100 60MM
SMOUV splice protection sleeves, tie-wraps, instructions
Kits/
Pkg
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Fits
Closure
D-12 Patch Tray
Individual Splice Modules
A/B Ribbon Tray Kit
Tray
Capacity
Part Number
Description
D-16 Patch Tray
Kit Includes
Kits/
Pkg.
Ribbon Fiber Trays
A or B
144 Mass Fusion
709972-000
FOSC-ACC-A/B-TRAY-12-RBN
(12 ber ribbon x 12 splices)
A/B Size Ribbon Tray with clear cover,
1
2 SM-6 splice modules, tie-wraps, instructions
C
216 Mass Fusion
(12 ber ribbon x 18 splices)
398955-000
FOSC-ACC-C-TRAY-RIBN-18
C Size Ribbon Tray with clear cover, 3 SM-6
splice modules, tie-wraps, instructions
1
D
288 Mass Fusion
(12 ber ribbon x 24 splices)
061064-000
FOSC-ACC-D-TRAY-RIBN-24
D Size Ribbon Tray with clear cover, 4 SM-6
splice modules, tie-wraps, instructions
1
Patch Trays
B
16 ber
patch tray
A38455-000
FOSC-ACC-B-TRAY-P-16-0
B-size Patch Tray with adapter retainer.
Holds up to 16 SC style adapters.
1
D
16 ber
patch tray
C03247-000
FOSC-ACC-D-TRAY-P-16-0
D-size Patch Tray with adapter retainer.
Holds up to 16 SC style adapters.
1
D
12 ber
patch tray
P5387P-000
FOSC-ACC-D-TRAY-P-12-0
D-size Patch Tray, adapter retainer,
no adapters installed
2
D
12 ber
patch tray
C91240-000
FOSC-ACC-D-TRAY-P-SC/APC
D-size Patch Tray, adapter retainer,
and 12 SC/APC style adapters
2
D
12 ber
patch tray
E90832-000
FOSC-ACC-D-TRAY-P-SC/UPC
D-size Patch Tray, adapter retainer,
and 12 SC/UPC style adapters.
2
90887R-000
FOSC-ACC-A-TRAY-COVER
1 clear A-size tray cover
25
B
Y66598-000
FOSC-ACC-B-TRAY-COVER
1 clear B-size tray cover
25
C
YD926E-000
FOSC-ACC-C-TRAY-COVER
1 clear C-size tray cover
25
D
ZP0533-000
FOSC-ACC-D-TRAY-COVER
1 clear D-size tray cover
25
Splice Tray Covers
A or BS
Splice Modules (for replacing or adding modules to trays)
All
581981-000
FOSC-ACC-SM6-MODULES
6-splice capacity snap-in module
48
All
332341-000
FOSC-ACC-SM8-MODULES
8-splice capacity snap-in module
48
All
275897-000
FOSC-ACC-SM12-MODULES**
12-splice capacity snap-in module
48
All
B86578-000
FOSC-ACC-SPLCEHLDR12-SMV
12-splice capacity (high density) snap-in module
100
*Splice tray dimensional information can be found in the Engineering Section.
**Tyco Electronics SMOUV splice sleeves are highly recommended for use with these trays/modules.
SMOUV splice protection sleeves
Fiber Type
Part Number
Description
Sleeve Information
Kits/
Pkg
SMOUV Fusion Splice Protection Sleeves
Single Fiber
693979-000
SMOUV-1120-01-US
Heat-shrinkable, 60mm, single ber splice protection sleeve
100
Single Fiber
143339-000
SMOUV-1120-02-US
Heat-shrinkable, 45mm, single ber splice protection sleeve
100
Ribbon Fiber
888498-000
SMOUV-1120-R2/12-US
Heat-shrinkable, 42mm, 12 ber ribbon splice protection sleeve
50
Fiber Management and Routing Accessories
• Single and Ribbon ber
Closure
Sizes
All
Tubing Style
Transportation
Part Number
526767-000
Description
FOSC-ACC-TTUBE-SMLL-16IN
Kit Includes
Six 16 inch pieces
Std. Pack
240
All
Transportation
829333-000
FOSC-ACC-TTUBE-SMLL-50FT
One 50 foot section
10
All
Transportation
118317-000
FOSC-ACC-TTUBE-LRGE-16IN
Six 16 inch pieces
240
All
Transportation
646311-000
FOSC-ACC-TTUBE-LRGE-50FT
One 50 foot section
10
All
Transportation
577809-000
FOSC-ACC-TTUBE-RBN12-16I
Six 16 inch pieces
240
All
Transportation
226809-000
FOSC-ACC-TTUBE-RBN12-50
One 50 foot section
10
All
Transportation
F2103R-000
FOSC-ACC-TTUBE-RBN-16I
Six 16 inch pieces
240
All
Transportation
57581K-000
FOSC-ACC-TTUBE-RIBN24-50
One 50 foot section
10
All
Buffer Tube Wrap
RH0073-000
FOSC-ACC-LBTWRAP-100
One wrap
100
All
Spiral
234855-000
FOSC-ACC-SPRLTUBE-1/8
One 500 foot roll
1
All
Spiral
469031-000
FOSC-ACC-SPRLTUBE-3/16
One 200 foot roll
1
All
Spiral
RH0090-000
FOSC-ACC-SPRLTBE-3/16-25
One 25 foot section
1
All
Spiral
460490-000
FOSC-ACC-SPRLTBE-3/8-50
One 50 foot section
1
118317-000
829333-000
Slack Basket Accessories
• Various styles for regular or increased slack storage
Slack Baskets-For converting no-basket kits to basket versions, or for changing basket size
Closure
Sizes
Description
Kits per
Pkg.
Basket Style
Part Number
A
Standard
Tall
E14672-000
A91433-000
FOSC-ACC-A8/450A-BASKET
FOSC-ACC-450A4-BASKET-T
1
1
BS
Standard
Tall
457507-000
F53958-000
FOSC-ACC-B-BASKET
FOSC-ACC-B-BASKET-TALL
1
1
B
Standard
Tall
457507-000
F53958-000
FOSC-ACC-B-BASKET
FOSC-ACC-B-BASKET-TALL
1
1
C
Standard
Tall
RH0199-000
RH0200-000
FOSC-ACC-C-BASKET
FOSC-ACC-C-BASKET-TALL
1
1
D
Standard
Tall
089279-000
056395-000
FOSC-ACC-D-BASKET
FOSC-ACC-D-BASKET-TALL
1
1
089279-000
Note: Tall style slack storage baskets provide increased slack storage over standard baskets, but may reduce the
closure's splice tray capacity!
Grounding Accessories
Part
Number
A33560-000
Description
FOSC-ACC-450-FIBRGRD-KIT
449105-000
FOSC-ACC-MULT-EXT-GRND-3
671575-000
FOSC-ACC-MULT-EXT-GRND-6
A11796-000
FOSC-ACC-450-COM-GRD-A
D46439-000
FOSC-ACC-450-COM-GRD-B
92733M-000
FOSC-ACC-RUS-B-BONDS
* Grounds are placed through one of the cable ports.
Kit Includes
Groundwire and associated hardware to add 1 ground to any
FOSC 450 closure
Groundwire and associated hardware to add up to 3 grounds to
any FOSC 450 closure*
Groundwire and associated hardware to add 6 grounds to any
FOSC 450 closure*
Groundwires (alligator clip one end, eyelet on other) and bonding
braid to bond up to 6 cables together
Groundwires (eyelets on each end ...for use with B-Bonds) and
bonding braid to bond up to 6 cables together
RUS-listed B Bonds
Kits per
Pkg.
5
5
5
5
5
100
Closure Mounting Hardware Accessories
• Variety of mounting hardware options
Fits 450 Closures
A BS B C D
Part Number
Description
Std.
Pack
Kit Includes
Aerial
•
•
•
•
•
360889-000
FOSC-ACC-LASHING-STRAPS
10
2 metallic lashing straps, 2 nylon lashing straps,
4 cable spacers
•
•
•
•
•
663259-000
FOSC-ACC-AERIAL-CLAMPS
10
2 hanger brackets and clamps, 2 Snaplock clamps,
2 lashing straps
•
•
•
•
•
124063-000
FOSC-ACC-LASH-CBL-SUPORT
1
Lashing strap
•
•
•
•
•
340883-000
FOSC-ACC-UNIV-AER-CL-NO6
5
2 hanger brackets and clamps, 2 lashing straps,
ground wire
•
•
•
•
•
A13909-000
FOSC-ACC-450-AERIAL-CLMP
10
1 dome mounting bracket, 1 base mounting bracket,
2 Snaplock clamps, associated hardware
•
•
•
•
•
1B376P-000
FOSC-ACC-ADSSBRKT-400450
1
1 set of ADSS hanger clamps, cable protection wrap
•
•
•
•
•
C85442-000
FOSC-ACC-SNAPLOCK-CLAMPS
100
1 Snaplock clamp
•
•
•
F29601-000
FOSC-ACC-PED-BRKT-UNIV
10
Universal pedestal bracket, Snaplock clamp,
associated hardware
1
2 mounting brackets, 2 Snaplock clamps, 4 lag bolts
Pedestal
•
•
Pole or Wall
•
•
•
•
•
C82508-000
FOSC-ACC-WALL/POLE-MOUNT
•
•
•
•
•
D80858-000
FOSC-ACC-WALL-PMT-BRKT
1
2 mounting brackets, 4 Snaplock clamps, 4 lag bolts
D91837-000
FOSC-ACC-MTGBKT-450-B6PL
1
Custom bracket components and hardware for mounting
FOSC 450 B6 closure to pole
919435-000
FOSC-ACC-D-POLE-MOUNT
1
Custom bracket and hardware for mounting FOSC 450 D6 closure to
pole.
•
•
360889-000
663259-000
124063-000
A13909-000
F29601-000
1B376P-000
D80858-000
D91837-000
919435-000
*Snaplock is a trademark of Epicor Industries, Inc.
340883-000
C82508-000
FOSC OC Splitter
FOSC OC - X X X X X - XX
Tray Type
Split Ratio
1 - FOSC-A-TRAY-24,
splice modules in the middle of the tray
2 - FOSC-B-TRAY-24,
splice modules in the middle of the tray
3 - FOSC-D-TRAY-72,
splice modules in the middle of the tray
4 - FOSC-A-TRAY-S24,
splices near the edges of the tray
5 - FOSC-B-TRAY-S24,
- splices near the edges of the tray
6 - FOSC-A-TRAY-24, “black box” concept*
00 - Symmetrical
05 - 5/95
10 - 10/90
15 - 15/85
20 - 20/80
25 - 25/75
30 - 30/70
35 - 35/65
40 - 40/60
45 - 45/55
Note: All split ratios are only available for 1x2 and
2x2 splitters.
Splitter Type
A - Splitter grade A (fused biconical tapered)
P - Splitter grade P (standard planar technology)
O - Splitter grade O (low loss planar technology)
Number of Integrated Splitters
Number of Inputs per Splitter
1 - 1x...splitter
2 - 2x...splitter
Number of Outputs per Splitter
2
3
4
6
8
A
C
G
W
-
...x 2 splitter
...x 3 splitter
...x 4 splitter
...x 6 splitter
...x 8 splitter
...x10 splitter
...x12 splitter
...x16 splitter
...x32 splitter
* FOSC-A-Tray-24 ts A or B size closures.
Field-Installable Splitter
OCC 1 X - X XX XX - XX XX XX X
Coupler
Packaging
F
- Field installable holder*
Coupler Type
Dual window wideband
Output Cable Type
NQ - 250 micron single ber type
Planar Type
A - FBT
P - Planar
O - Low loss planar
Input Cable Type
NQ - 250 micron
Number of Inputs per Splitter
1 - 1x ... splitter
2 - 2x ... splitter
Connector Type
NN - None
Number of Outputs per Splitter
04
08
16
32
64
-
... x4 splitter
... x8 splitter
... x16 splitter
... x32 splitter
... x64 splitter
Split Ratio
00 - Symmetrical
* Standard ber length = 2.5 + -0.5m at each side
(non-connectorized)
Passives - Splitters
Trays with Single-mode Wideband Couplers/Splitters
Tray
Tray
Type** Capacity
Splitter Type
Part Number
OC Splitter Kits
Description
Detailed Description
Std.
Pkg.
A
A
A
A
24*
24*
24*
24*
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
CA2118-000
CC6221-000
133450-000
D30790-000
FOSC-OC-1A11200
FOSC-OC-1A11235
FOSC-OC-1A11400
FOSC-OC-1A21400
1 - 1x2 splitter, symmetrical split ratio
1 - 1x2 splitter, 35/65 symmetrical split ratio
1 - 1x4 splitter, symmetrical split ratio
2 - 1x4 splitter, symmetrical split ratio
1
1
1
1
B
B
B
24*
24*
24*
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
C79887-000
768084-000
861456-000
FOSC-OC-2A11200
FOSC-OC-2A11400
FOSC-OC-2A11800
1 - 1x2 splitter, symmetrical split ratio
1 - 1x4 splitter, symmetrical split ratio
1 - 1x8 splitter, symmetrical split ratio
1
1
1
D
D
D
D
D
D
D
D
D
D
D
24*
72*
72*
72*
72*
72*
72*
72*
72*
72*
72*
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Group P-Standard Planar Technology
Group P-Standard Planar Technology
Group P-Standard Planar Technology
Group P-Standard Planar Technology
Group P-Standard Planar Technology
Group P-Standard Planar Technology
C75768-000
C70179-000
329536-000
A69314-000
A61669-000
CB9820-000
E49835-000
D39890-000
F58883-000
CB4800-000
C73000-000
FOSC-OC-3A11200
FOSC-OC-3A11400
FOSC-OC-3A11800
FOSC-OC-3A21400
FOSC-OC-3A21800
FOSC-OC-3P11400
FOSC-OC-3P11800
FOSC-OC-3P11G00
FOSC-OC-3P11W00
FOSC-OC-3P21800
FOSC-OC-3P21G00
1 - 1x2 splitter, symmetrical split ratio
1 - 1x4 splitter, symmetrical split ratio
1 - 1x8 splitter, symmetrical split ratio
2 - 1x4 splitter, symmetrical split ratio
2 - 1x8 splitter, symmetrical split ratio
1 - 1x4 splitter, symmetrical split ratio
1 - 1x8 splitter, symmetrical split ratio
1 - 1x16 splitter, symmetrical split ratio
1 - 1x32 splitter, symmetrical split ratio
2 - 1x8 splitter, symmetrical split ratio
2 - 1x16 splitter, symmetrical split ratio
1
1
1
1
1
1
1
1
1
1
1
A or B
A or B
A or B
A or B
A or B
A or B
A or B
A or B
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade A-Fused Biconical Tapered
Grade P-Fused Planar Tapered
Grade P-Fused Planar Tapered
E45575-000
C74415-000
F54686-000
A10948-000
E42433-000
C74674-000
D39498-000
C75701-000
FOSC-OC-6A11200
FOSC-OC-6A11400
FOSC-OC-6A11800
FOSC-OC-6A21400
FOSC-OC-6A21800
FOSC-OC-6A51200
FOSC-OC-6P11G00
FOSC-OC-6P12G00
1 - 1x2 splitter, symmetrical split ratio
1 - 1x4 splitter, symmetrical split ratio
1 - 1x8 splitter, symmetrical split ratio
2 - 1x4 splitter, symmetrical split ratio
2 - 1x8 splitter, symmetrical split ratio
1 - 5x2 splitter, symmetrical split ratio
1 - 1x16 splitter, symmetrical split ratio
1 - 2x16 splitter, symmetrical split ratio
1
1
1
1
1
1
1
1
Grade A-Fused Biconical Tapered
Grade P-Fused Planar Tapered
Grade P-Fused Planar Tapered
Grade P-Fused Planar Tapered
Grade P-Fused Planar Tapered
CC9545-000
CC8542-000
CC8544-000
CC8312-000
CC8313-000
OCC1A-10400-NNNQNQF
OCC1P-10800-NNNQNQF
OCC1P-11600-NNNQNQF
OCC1P-13200-NNNQNQF
OCC1P-16400-NNNQNQF
1 - 1x4 FBT
1 - 1x8 planar
1 - 1x16 planar
1 - 1x32 planar
1 - 1x64 planar
1
1
1
1
1
*Tyco Electronics SMOUV splice sleeves highly recommended for use with these trays/modules.
** A trays t A or B-size closures.
Field-installable Splitter
FOSC OC Splitter
FOSC OC CWDM
FOSC OC - XC XX XX X XX
Tray Type
Connector type
3 - FOSC-D-TRAY-72,
splice modules in the middle of the tray
6 - FOSC-A-TRAY-24, “black box” concept
7 - 2 unit high FOSC-D
tray with 12 connector patchpanel
8 - 1 unit high FOSC- tray with 6 connector
patchpanel
10 - 2 unit high FOSC-D tray with splice modules
11 - 2 unit high FOSC-A tray "black box" concept*
NN - Not applicable
Min. return loss
50 db (UPC)*
60 db (APC 8º)**
60 db (APC 9º)**
Connector type
SC FC E2000 LC MU
S1 F1 L1 U1
S2 F2 E9 L2
S3
*UPC Ultra polished physical contact
**APC Angled polished physical contact
Channel Spacing/Sequence
Coarse WDM components
1
2
0
- 20 nm e.g. 1270,1290, 1310, ...
- 40 nm e.g. 1270, 1310, 1350, ...
- one channel only
Number of Channels
1
2
4
8
A
B
C
D
E
F
G
H
I
J
K
L
N
O
P
Starting Wavelength
27 - 1270 nm
29 - 1290 nm
-
4 channels + upgrade port
8 channels + upgrade port
4 channels + upgrade + 1310 nm port
8 channels + upgrade + 1310 nm port
4 channels + 1310 nm port
8 channels + 1310 nm port
10 channels + 1310 nm port
2 channels + upgrade
2 channels + upgrade + 1310 nm port
5 channels + upgrade + 1310 nm port
5 channels + upgrade
3 channels + upgrade
10 channels
18 channels
10 channels + 1310 (cwdm)
61 - 1610 nm
Type
M
D
X
Y
-
Multiplexing
Demultiplexing
Double demux (for 2 ber system)
Double mux (for 2 ber system)
* FOSC-A-Tray ts A or B size closures.
Field-Installable CWDM
OCC1 C - X - XX X - XX XX F
Connectorized Simplex
Cable Type
In-Output Cable Type
NQ - 250 micron single ber
Connector Type at End 1
Number of Channels
1 - Single channel add or drop
X - Double (de)mux (single channel add and
drop on 2-ber system)
2 - Two channel double (de)mux (2-channel add and drop
on 2-ber system)
Starting Wavelength
27 - 1271 nm
29 - 1291 nm
611 - 1611 nm
NN - None
Channel Spacing/Sequence
0
1
- One channel only
- 20nm e.g. 1470, 1490
Passives - CWDMs
Trays with Coarse Wavelength Division Multiplexing/DeMultiplex Components (CWDM)
Tray
Type**
Tray
Capacity
Number of
Channels
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
“Black Box”
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
5
8
8
D
D
D
D
D
D
D
D
D
72*
72*
72*
72*
72*
72*
72*
6 connectors
6 connectors
1
3
5
4
8
4
8
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
Upgrade
Port
1310
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
FOSC-OC-XC-CWDMs
Description
Detailed Description
A12093-000
D81777-000
A68278-000
F06637-000
C23974-000
D86266-000
D33963-000
D31817-000
D81979-000
C73118-000
E48928-000
CB1790-000
CA9070-000
CA9071-000
CC4287-000
CC4288-000
CC4289-000
CC4290-000
CA6103-000
CB1808-000
CB1799-000
CA6417-000
CC3378-000
CB6702-000
C27830-000
CA6420-000
CC3676-000
FOSC-OC-6C1X470NN
FOSC-OC-6C1X490NN
FOSC-OC-6C1X530NN
FOSC-OC-6C1X550NN
FOSC-OC-6C1X570NN
FOSC-OC-6C1X590NN
FOSC-OC-6C1X610NN
FOSC-OC-6C2D471NN
FOSC-OC-6C2D511NN
FOSC-OC-6C2D551NN
FOSC-OC-6C2D591NN
FOSC-OC-6CHD511NN
FOSC-OC-6CHD551NN
FOSC-OC-6CHD591NN
FOSC-OC-6CHX471NN
FOSC-OC-6CHX511NN
FOSC-OC-6CHX551NN
FOSC-OC-6CHX591NN
FOSC-OC-6C4D551NN
FOSC-OC-6CAD471NN
FOSC-OC-6CAD551NN
FOSC-OC-6CAM511NN
FOSC-OC-6CAX551NN
FOSC-OC-6CAY471NN
FOSC-OC-6C5D431NN
FOSC-OC-6C8D471NN
FOSC-OC-6CBD471NN
Double Demux 1470nm
Double Demux 1490nm
Double Demux 1530nm
Double Demux 1550nm
Double Demux 1570nm
Double Demux 1590nm
Double Demux 1610nm
Demux 1470-1490nm
Demux 1510-1530nm
Demux 1550-1570nm
Demux 1590-1610nm
Demux 1510-1530nm
Demux 1550-1570nm
Demux 1590-1610nm
Double Demux 1470-1490nm
Double Demux 1510-1530nm
Double Demux 1550-1570nm
Double Demux 1590-1610nm
Demux 1550-1610nm
Demux 1470-1530nm
Demux 1550-1610nm
Mux 1510-1570nm
Double Demux 1550-1610nm
Double Mux 1470-1530nm
Demux 1430-1510nm
Demux 1470-1610nm
Demux 1470-1610nm
CC2323-000
CC7395-000
A67037-000
CC6143-000
CC6140-000
E99683-000
E98266-000
E46843-000
E47122--000
FOSC-OC-3C1X470NN
FOSC-OC-3C3R471NN
FOSC-OC-3C5X431NN
FOSC-OC-3CAD551NN
FOSC-OC-3CBD471NN
FOSC-OC-3CCX471NN
FOSC-OC-3CFD471NN
FOSC-OC-8C1X471S2
FOSC-OC-8C1X611S2
Double Demux 1470nm
Add/Drop Redundant 1470-1530nm
Double Demux 1430-1510nm
Demux 1550-1610nm
Demux 1470-1610nm
Double Demux 1470-1530nm
Demux 1470-1610nm
Double Demux 1470nm SC/APC
Double Demux 1610nm SC/APC
CP5771-000
CP5772-000
CP5773-000
CP5774-000
CP5775-000
CP5776-000
CP5777-000
CP5779-000
CP5780-000
CP5781-000
CP9377-000
CP9378-000
CP9379-000
CP9380-000
CP9381-000
OCC1C-X-430-NNNQF-US26
OCC1C-X-450-NNNQF-US26
OCC1C-X-470-NNNQF-US26
OCC1C-X-490-NNNQF-US26
OCC1C-X-510-NNNQF-US26
OCC1C-X-530-NNNQF-US26
OCC1C-X-550-NNNQF-US26
OCC1C-X-570-NNNQF-US26
OCC1C-X-590-NNNQF-US26
OCC1C-X-610-NNNQF-US26
OCC1C-2-X471-NNNQF-US26
OCC1C-2-X511-NNNQF-US26
OCC1C-2-X551-NNNQF-US26
OCC1C-2-X591-NNNQF-US26
OCC1C-2-X31A-NNNQF-US26
1 Ch Double Demux 1431 nm
1 Ch Double Demux 1451 nm
1 Ch Double Demux 1471 nm
1 Ch Double Demux 1491 nm
1 Ch Double Demux 1511 nm
1 Ch Double Demux 1531 nm
1 Ch Double Demux 1551 nm
1 Ch Double Demux 1571 nm
1 Ch Double Demux 1591 nm
1 Ch Double Demux 1611 nm
2 Ch Double Demux 1471 - 1491 nm
2 Ch Double Demux 1511 - 1531 nm
2 Ch Double Demux 1551 - 1571 nm
2 Ch Double Demux 1591 - 1611 nm
2 Ch Double Demux 1310 - 1550 nm
Part Number
*Tyco Electronics SMOUV splice sleeves are highly recommended for use with these trays/modules. Note: One tray kit per package.
** A trays t A or B-size closures.
Miscellaneous Accessories
Category
Item
Part Number
Description
Kit Includes
Workstand
FOSC 450 Closure Workstand
941802-000
FOSC-ACC-450-WORKSTAND
Clamp for holding FOSC 450 closure during splicing
Flame Retardant
Coverings
Flame Retardant Vault Bag
for A & B size closures
Flame Retardant Vault Bag for
C & D size closures
263245-000
FOSC-ACC-A/B-VAULT-BAG
766709-000
FOSC-ACC-D-VAULT-BAG
1 flame retardant bag for FOSC 450 A, B or BS
(B Short) closure
1 flame retardant bag for FOSC 450 C or D closure
Closure Upgrade Kit FOSC 450C to 450D Upgrade Kit
9J701X-000
FOSC-ACC-C-D-CONVRSION
Kit to upgrade FOSC 450C closure 450D. Includes
D size dome and 36 count splice tray (additional
trays sold separately).
Closure Rehab Kit
FOSC 450 C&D Split Base
D80569-000
FOSC-450D-SPLTBASE-01
FOSC 450 D Rehab Kit
RH0070-000
FOSC450-D6-REHAB-KIT
FOSC 450C and D version base separable into 2
halves. For rehabilitation of closures with wide
splice trays into a FOSC 450 C or D closure.
Combination 450 D closure and Split Base
Label Cards
Label Cards - Blue
Label Cards - White
Label for A & B trays
119982-000
759952-000
E34360-000
FOSC-ACC-ID-LBLCARD-BLUE
FOSC-ACC-ID-LBLCARD-WHT
FOSC-ACC-DECAL-ID-ABTRAY
Blue Label Cards with numbers F1-F24 & 1TO-8TO
White Label Cards with numbers D1-D24, 1-8
Identification label for A&B trays
Slack Storage
Sock
Loose Buffer Tube Storage
Sock for A, BS, B closures
Loose Buffer Tube Storage
Sock for C & D closures
769441-000
FOSC-ACC-LBT-SOCK
019008-000
FOSC400-D-SOCK
Loose buffer tube storage sock for 450A, B and BS
closures.
Loose buffer tube storage sock for 450 C & D
closures.
Loose Buffer Tube Wrap
RH0073-000
FOSC-ACC-LBT-WRAP-100
Multi-Drop Wrap
RH0126-000
FOSC-ACC-MD-WRAP-25
Shield Continuity Clamp
9V219F-000
FOSC-ACC-SHIELDCONTCLMP
Ribbon Fiber Termination Module
D7512P-000
FOSC-ACC-RIBBON-TERM-MOD
D Basket Ribbon Router
525147-000
FOSC-ACC-D-RIBBON-ROUTER
FOSC Tray Hold-down tabs
FOSC Tray tie-wraps
Tray Backbone
D77919-000
L5904R-000
F47112-000
FOSC-ACC-TRAY-HOLD-TABS
FOSC-ACC-TRAY-TY-RAPS
FOSC-ACC-D-BACKBONE
FOSC Tray Velcro Strap - Black
L48638-000
FOSC-ACC-VELCROSTRAP-16
Strap for securing trays in FOSC 450 A, BS closures
FOSC Tray Velcro Strap - Red
66994Z-000
FOSC-ACC-VELCROSTRAP-25
Strap for securing trays in FOSC 450 B, C and D closures
Strength Member
Bracket
Large Strength Member Bracket
135731-000
FOSC-ACC-STRMEM-BRKT-LG
Large size strength member bracket
Specialty Tools
Buffer Tube Stripper Tool
250960-000
FACC-AXIAL-STRIPPER-RC1
Raucut1 tooling to open cut or uncut (midspan)
buffer tubes. Kit includes inserts for tubes 1.8 mm
to 4.2 mm diameter.
Wraps
.
Shield Continuity
Splice Tray
Accessories
Tray Backbone
Straps to
Secure Trays
Multi-functional adhesive backed wrap primarily for
placement onto loose buffer tubes as they enter a
splice tray.
Multi-functional adhesive backed wrap primarily for
placement onto drop cables to be placed under the
cable retention clamp hardware
Specially designed holder for attaching un-tubed
ribbons onto a splice tray
Device for separating ribbons routing to different
splice trays
Tray tabs for A & B splice trays
Tie-wraps for splice trays
Bracket for holding trays in position when no slack
basket is present
Additional FOSC Fiber Optic
Splice Closures
FOSC 450 ber optic splice closures is just
one of several families of FOSC closures
that connect, protect and seal the ber optic
network.
The information that follows describes some
of the other closure families and products
available for your ber network from Tyco
Electronics.
FOSC Closure Family
FOSC 250 Closure
FOSC 350 Closure
The FOSC 250 splice closure sets a
new standard in installation efciency
for Fiber-to-the-Home applications.
Specically designed for more efcient
termination of drop or terminal cables
to the distribution cable, the FOSC 250
splice closure utilizes an integrated splice
tray, slack basket, and compressed
gel sealed base that simplies training
and installation while reducing loose or
unused closure parts, deployment times,
installation errors, and overall installation
costs.
The new FOSC 350 in-line gel sealed
ber splice closure holds up to 96 single
splices (196 for 12-ber ribbons). This
two-halved, re-enterable and re-useable
closure incorporates four cable entry
ports, hinging splice trays, and toolless
perimeter latches. Accessory kits are
available for bringing multiple cables
through a single cable port.
FOSC 400 Closures
Similar to the 450 family, this is a family
of single ended (butt) style ber optic
splice closures utilizing heat shrink cable
sealing rather than gel. Other features
include a removable dome, hinging splice
trays and a range of sizes and styles to
choose from.
AIR FOSC Closures
These free breathing closures are designed for aerial applications and provide
either taut sheath or inline (with slack)
splicing. The rodent resistant body and
FOSC splice trays provide an efcient
closure to connect, protect and distribute
ber and ber cables.
Gator 12F Gel
Splice Closure
FOSC 400 Flame
Retardant Closures
Flame retardant versions of the
FOSC 400 B and 400 D closures.
Tyco Electronics introduces a small
splice closure designed for splicing two
at drop style cables.
• Small enough to t into “ower pot” size
hand holes
• Accommodates up to 12 single bers,
12 ribbonized bers, or one 12 ber
ribbon
FOSC 500 Closures
The smallest of the FOSC closure family,
the 500 uses gel sealing and can be
congured for butt or inline splicing. Slack
storage is limited to bare bers, and has
a twenty-four single splice capacity.
FOSC 600 Closures
The largest of the FOSC closure family,
600 ber optic splice closures are a
great t for applications such as large
cable splicing in the network backbone,
consolidating a large number of cables
and splices, or rehabilitating failed
closures.
For additional information, contact your
local area sales representative or visit
our web site: www.us.telecomosp.com
Engineering Information
In the following section you will nd dimensional
and assembly information and drawings related
to FOSC 450 ber optic splice closures and
accessories. Additional information is available
upon request.
Closure Dimensions
L
Drawing Key
1. Dome
2. Clamp
3. Base
4. Trigger
1
2
4
D
3
Closure Size (Dimensions in inches)
Gel-Block Proles
A
BS
19
19
L Total closure length, excluding trigger
8
9.2
D Closure outer diameter, including clamp
NOTE: Diameters excluding clamp are approximately 2 inches less.
450 A
450 BS, B6, C6, D6
Cable port dimensions (Dimensions in inches)
Number round cable ports
4
Cable diameter range
.30-.87
(2X)
.39-1.10
(2X)
6
.35-1
B6
24
9.8
C6
23
11.5
D6
30
11.5
6
.35-1
6
.35-1
6
.35-1
FOSC 450 Closure Family Assembly Drawings
Note: The drawings are not to scale
450 A
450 BS (B Short)
Shown with 2 standard splice trays and tall version slack basket
Shown with 6 standard splice trays and standard version slack basket
450 B
450 C/D
Shown with 6 standard splice trays and standard version slack basket
D size shown with 6 standard splice trays and standard version slack basket
Note: FOSC 450 C closure is not shown, but will replicate the D size
with the exception of shorter trays, basket, and dome.
Splice Tray Dimensions
Tray Sizes
A
Fits FOSC Closure Size
400
450
500
A4, A8
A4, BS
N/A
600
N/A
AIR FOSC
A
Tray Fiber Capacity
Versions Available
Single
Mass
12, 24
72*
B
B2, B4
B6
N/A
N/A
B
12, 24
C
C5
C6
N/A
N/A
N/A
12, 24
D
D5
D6
N/A
C or D
N/A
36, 72, 96
A/B Ribbon
A4, A8, B2, B4
A4, BS, B6
N/A
N/A
A&B
N/A
C Ribbon
C5
C6
N/A
N/A
N/A
N/A
D Ribbon
D5
D6
N/A
C or D
N/A
N/A
* When performing mass fusion splicing on these trays, ribbon slack must be stored on a separate tray or slack basket.
72*
144*
288*
144
216
288
Nominal Tray Dimensions
(inches, hinge not included)
LxWxH
91/8 x 37/8 x 7/16
12 x 37/8 x 7/16
71/2 x 57/8 x 7/16
15 x 57/8 x 7/16
91/8 x 37/8 x 1
71/2 x 57/8 x 1
15 x 57/8 x 1
432
864
8 4 / 65 / 56
43,4/35/26
36
72
96
Mid-Sheath
Single Splice
Mass Fusion Splice
Trays Per Closure
Standard Trays
Ribbon Trays
Single Fiber Splice
Capacity per Tray
SM6 Modules
SM12 Modules12
FIST Modules12
Yes
(400-D5/FR)
CV-1981 Hot
Air Gun, Power
Fire Retardant
Closure Available
Tools Required
No
12
24
n/a
n/a
6 / 109
Yes
(400-D5/FR)
4 / 89
“O” Ring/
Clamp
Yes
(4/all, 8/sc)
12
24
n/a
44
25
96
144
48
96
144
8 dia. 25 L
8
B4
A8
No/No
12
24
n/a
44/35/26
24/15/16
96
144
48
96
144
69
No10
n/a
109
“O” Ring/
Clamp
Yes
(4/all, 8/sc)
No/No
12
24
n/a
25
15
48
n/a
24
48
n/a
8 dia. 19.5 L
6
A4
C6
No10
6 / 167 / 218
n/a
“O” Ring/
Clamp
No
No
12
24
n/a
84 / 6 5 / 5 6
44/35/26
192
432
96
192
864
Can Wrench, Can Wrench,
Snips
Snips
No10
6 / 167 / 218
n/a
“O” Ring/
Clamp
Yes
(12,16/sc)
Yes
(4/all, 8/sc)
36
72
96
84 / 6 5 / 5 6
43,4/35/26
576
864
288
576
1152
11.5 dia. 30 L 11.5 dia. 23 L
20
16
D6
Can Wrench,
Snips
No10
6 / 167 / 218
n/a
“O” Ring/
Clamp
Yes
(12,16/sc)
Yes
(4/all, 8/sc)
12
24
n/a
64 / 6 5 / 4 6
34/35/26
144
288
72
144
288
9.8 dia. 24 L
13
FOSC 450
B6
With standard basket.
With tall basket.
7
If using the 3-cable Multi-cable kit, 3 at or 3 round cables per port if cable does not exceed
<0.25” diameter
8
If using the 4-cable Multi-cable kits and combined cables do not exceed 1” diameter.
6
5
CV-1981 Hot
CV-1981 Hot
CV-1981 Hot
Air Gun, Power Air Gun, Power Air Gun, Power
No10
7 / 129
n/a
“O” Ring/
Clamp
No
No
12
24
n/a
84 / 65 / 56
44/35/26
192
432
96
192
864
11.5 dia. 23 L
12
FOSC 400
C5
B2
HEAT-SHRINK CABLE SEALING
Closure length (“L”) plus 10X largest cable diameter installed equals the overall length required for handhole.
Maximum dimensions includes clamp and cable sealing. Diameter dimensions include clamp. Diameters
without clamps are approximately 2 inches less.
2
Trays congured with FIST style splice modules provide 96 single splice capacity - FOSC 400 D5 and 450
D6 closures can also accommodate FIST style modules (SMOUV splice protection sleeves must be used)
3
The ribbon tray can also be congured with 12 SC adapters for patching and provide 12 single splice capacity.
4
Flexible sock is used for LBT storage.
1
7 / 129
n/a
“O” Ring/
Clamp
Cable Capacity
Butt (std./max.)
Inline (std./max.)
Sealing System
Closure Dome-to-Base or
Top-to-Bottom
Basket (quantity/type)
Yes
(12,16/sc)
Yes
(4/all, 8/sc)
288
576
1152
Closure Capacity
End-to-End
Single Splice (SM6 Modules)
Single Splice (SM12 Modules)12
Mass Fusion Splice
Patching
Tray (quantity/type)
11.5 dia. 31 L
16
D5
Closure Size1 (inches)
Approx. Closure Weights (lbs)
Closure
Type/Size
QUICK REFERENCE GUIDE
FOSC Fiber Optic Splice Closures
Snips
No10
Can Wrench
Snips
No10
4 / 107 / 138
n/a
“O” Ring/
Clamp
Yes
(4/all, 8/sc)
No
12
24
n/a
44 / 35 / 26
24/25/16
72
216
48
96
144
8 dia. 19 L
6
A4
1/2" Nut
Driver,
Screwdriver
No
2
4
Dry Gasket
No
No
n/a
n/a
24
1
n/a
24
n/a
242
242
n/a
19 Lx2.5x5
5
FOSC 500
AA
1/2" Nut
Driver,
Screwdriver
No
8 / 167 / 208
12 / 207 / 248
Dry Gasket
Yes
(12,16/sc)
No
36
72
96
9
53
864
1728
324
648 / 8642
1728
33 Lx10x11
31
D
1/2" Nut
Driver,
Screwdriver
No
8 / 167 / 208
12 / 207 / 248
Dry Gasket
Yes
(12,16/sc)
No
36
72
96
5
313
480
864
180
360 / 4802
864
33 Lx6x11
30
FOSC 600
C
1/2" Nut
Driver
No
n/a
up to 12
Breathable
No
No
12
24
n/a
4
n/a11
96
288
48
96
288
29.5/37 Lx6x5
22/15
AIR FOSC
A/B
BREATHABLE
10
Multiple cables per port can be installed (using SCOP or branch-off clip) if cable diameters do not
exceed port diameter.
Fire Retardant bag or blanket options.
11
Ribbon/mass fusion can be done but slack is pulled back into the slack area under the trays.
12
SMOUV splice protection sleeves must be used.
13
FOSC 600 C closure uses “D” size splice trays
9
6 / 167 / 218
n/a
“O” Ring/
Clamp
Yes
(4/all, 8/sc)
No
12
24
n/a
6 4/ 6 5 / 2 6
34/35/16
144
288
72
144
144
9.2 dia. 19 L
10
BS
GEL CABLE SEALING
FOSC 400 Closure
FOSC 450 Closure
Valve for flash test
Splicing tray
Nominal Tray
Dimensions
(L x Wx H)*
9 1/8 x 3 7/8 x 7/16
12 x 3 7/8 x 7/16
7 1/2 x 5 7/8 x 7/16
15 x 5 7/8 x 7/16
9 1/8 x 3 7/8 x 1
Fits the following closure sizes:
FOSC
FOSC
FOSC
500
450
400
N/A
A4, BS
A4, A8
N/A
B6
B2, B4
N/A
C6
C5
N/A
D6
D5
N/A
A4, BS,
A4, A8,
B6
B2, B4
N/A
C6
C5
N/A
D6
D5
N/A
C or D
FOSC
600
N/A
N/A
N/A
C or D
N/A
FOSC-500AA- XXX - XX - X X
FOSC 500 Closure
Closure size (inches)
Cable type
FOSC 450 - XX - X - XX - X - XXX
Valve for flash test
Ground feed-through lugs
Ground feed-through lugs
Mass
72
72
144
288
144
7 1/2 x 5 7/8 x 1
15 x 5 7/8 x 1
Valve for flash test
Tray Size
FOSC A
FOSC B
FOSC C
FOSC D
FOSC A/B Ribbon
216
288
Tray Fiber
Capacity
Single
12, 24
12, 24
12, 24
36, 72, 96
N/A
Closure Splice Tray Guide
Slack Basket type
Ground feed-through lugs
Cable blocking components
Number of trays pre-installed
AIR FOSC Closure
AIR-FOSC - X - XXX - XX - X X X
Closure size
Number of splice trays
Capacity (or type) of splice tray
Number of cable ports for which
termination hardware is provided
ORDERING INFORMATION
Closure size (inches)
FOSC 400 - XX - XX - X - XXX
Cable entry ports (in addition to
oval port which is included with
each kit)
Capacity (or type) of splice tray
FOSC 600 Closure
Valve for flash-test
Style
FOSC 600 - X X X - XX - X - X X X
Closure size
Ground feed-through lugs
Tray style
Number of trays
Grounding
FOSC C Ribbon N/A
FOSC D Ribbon N/A
*inches, hinge not included
Includes all CLASS A congurations with 12, 24, and Ribbon trays (FOSC400, 450 A, B and C
closures) or 36, 72 and Ribbon Trays (FOSC400, 450 D closures, FOSC600 Closures). Some sizes
available with tall slack storage baskets.
197697-000
ex: FOSC400-D5-36-1-NGV
Y53157-000
ex: FOSC450-C6-4-12-1-C6V
A37830-000
ex: FOSC600-D8B-R2-1-D4V
Number of splice trays
Slack Basket type
Number of cable ports
provided
Configuration
Capacity (or type) of splice trays
Miscellaneous
C22578-000
F84540-000
755467-000
677893-000
L21886-000
430987-000
Includes non-grounded CLASS A congurations with 12, 24, and Ribbon trays (FOSC400, 450 A, B
and C closures) or 36, 72 and Ribbon Trays (FOSC400, 450 D closures, FOSC600 Closures). Some
sizes available with tall slack storage baskets.
886337-000
ex: FOSC400-B4-12-1-BNV
776482-000
ex: FOSC450-B6-4-24-1-B0V
7X2580-000
ex: FOSC600-C8B-36-1-C0V
(Contact Tyco Electronics Customer Service for complete list)
CLASS B FOSC Closures
FOSC 400
FOSC400-A4-NT-0-NGV
FOSC400-A8-NT-0-NGV
FOSC400-B2-NT-0-NGV
FOSC400-B4-NT-0-NGV
FOSC400-C5-NT-0-NGV
FOSC400-D5-NT-0-NGV
A08617-000
F34112-000
058514-000
JI945R-000
931866-000
CLASS A FOSC Closures
FOSC 450
FOSC450-A4-4-NT-0-A1V
FOSC450-BS-6-NT-0-B0V
FOSC450-B6-6-NT-0-B3V
FOSC450-C6-6-NT-0-C6V
FOSC450-D6-6-NT-0-D6V
531296-000
A13992-000
867502-000
F90616-000
Includes RUS closure congurations.
FOSC 600
FOSC600-C8B-NT-0-C4V
FOSC600-C8I-NT-0-C4V
FOSC600-D8B-NT-0-D4V
FOSC600-D8I-NT-0-D4V
*NT indicates that no tray is factory installed in this closure.
AIR FOSC
AIR FOSC A
AIR FOSC B
N/A
N/A
AIR FOSC A,
AIR FOSC B
N/A
N/A
Index
A
D
R
Accessories: 12
Cable Termination: 13
Closure Mounting Hardware
Aerial: 17
Pedestal: 17
Pole: 17
Wall: 17
Description Key: 9
Dimensions
Closure: 27
Splice Tray: 28
Dome: 7
Dome to Base Seal: 7
Drawings
FOSC 450 A: 27
FOSC 450 B: 27
FOSC 450 BS (B Short): 27
FOSC 450 C: 27
FOSC 450 D: 27
Ribbon Fiber Trays: 15
Closure Sealing: 13
Fiber Management: 16
Fiber Routing: 16
Miscellaneous: 23
Patch Trays: 15
Ribbon Fiber Trays: 15
Splice Modules: 15
Splice Tray: 14
Splice Tray Covers: 15
AIR FOSC Closures: 25
B
Base: 7
C
Cable Retention Hardware: 7
Class A List: 10
Class B List: 10
Class C List: 10
Closure
Capacities: 6
Dimensions: 27
FOSC 250: 25
FOSC 400: 25
Kit Contents: 7
Closure Dimensions: 27
Closure Mounting: 17
Closure Mounting Hardware Accessories: 17
F
Field-Installable CWDM: 21
Field-Installable Splitter: 18
FOSC 250 Closure: 25
FOSC 350 Closure: 25
FOSC 400 Closures: 25
FOSC 400 Flame Retardant
Closures: 25
FOSC 500 Closures: 25
FOSC Closures
450 A: 5
450 B: 5
450 B Short: 5
450 C: 5
450 D: 5
FOSC OC CWDM: 20
FOSC OC Splitter: 18
G
Gator 12F Gel Splice Closure: 25
Gel Block: 7
M
Mounting: 17
O
Ordering: 8, 9
Closures
AIR FOSC: 25
Characteristics: 6
FOSC 350: 25
FOSC 400
Flame Retardant: 25
FOSC 500: 25
Gator 12F: 25
CWDM: 20, 21
P
Passives
CWDMs: 22
Splitters: 19
Patch Trays: 15
S
Seal: 7
SMOUV Fusion Splice Protection
Sleeve: 15
Splice Modules: 15
Splice Tray Covers: 15
Splice Tray Dimensions: 28
Splitter: 18
T
Trigger: 7
FOSC 250, FOSC 350, FOSC 400, FOSC 450, FOSC 500, FOSC 600, AIR FOSC, GATOR, TE (logo), and Tyco Electronics are trademarks of the Tyco
Electronics group of companies and its licensors.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed
to be reliable. However, Tyco Electronics makes no warranties as to its accuracy or completeness and disclaims any liability in connection
with its use. Tyco Electronics’ obligations shall only be as set forth in Tyco Electronics’ Standard Terms and Conditions of Sale for this
product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or
misuse of the product. Users of Tyco Electronics products should make their own evaluation to determine the suitability of each such product
for the specific application.
Tyco Electronics Corporation
For
more information or to place an order,
8000 Purfoy Road
Fuquay Varina, NC 27526-9349
please
contact Supply Solutions at
Tel: 919-557-8900
Fax: 919-557-8498
866-978-7759.
www.tycoelectronics.com
www.us.telecomosp.com
Courtesy
of Tyco Corporation.
©2004 - 2009 Tyco Electronics Corporation. All rights reserved.
1654571 F429.11/09