Specifications
Signal Tower
Dimensions (Unit：mm)
Model
LA6- □ D □□□ - □
Rated Voltage
DC24 V
Operating Voltage Range
±10% of Rated Voltage
Standard
Rated Power
Consumption
Maximum
16
LA6-5 D □□ N-RYGBC
5W
LA6-5 D □□ B-RYGBC
6.5W
LA6-3D □□ N-RYG
3.5W
LA6-3D □□ B-RYG
4.5W
LA6-5 D □□ N-YYYYY
7W
LA6-5 D □□ B-YYYYY
8W
LA6-3D □□ N-YYY
4.5W
LA6-3D □□ B-YY
5.5W
16
< Specification : Height >
5 - B : 330
3 - B : 264
5 - N : 290
3 - N : 224
Environmental Condition Power Consumption test with alarm set at Alarm Sound No.1 at maximum volume
Signal Wire Current
Maximum 70mA
Standby Current
Maximum 15mA
■ [LJ Steel Pole & ‘L’ Bracket
Cable Type
■ T N Direct Mount / Terminal Buss Type
< Specification : Height >
5 - B : 320
3 - B : 254
5 - N : 280
3 - N : 214
Operating Ambient Temperature -25℃ to +60℃
Operating Humidity Range
Less than 90% RH (No Dew or Condensation)
Storage Temperature Range
-25℃ to +60℃
Storage Humidity Range
Less than 90% RH (No Dew or Condensation)
70
Indoor Only
40
Mounting Direction
Upright/Inverted Direction
20
IP65 (With alarm: IP54) IEC 60529
2
Environmental Condition Install in an upright position
LA6- □□ LJ □□
Sweep Durability: Total amplitude: 0.3 mmp-p (10 - 57.5 Hz),
Acceleration: 20.0 m/s2 (57.5 - 150 Hz)
Fixed pitch durability: Acceleration 20.0 m/s2
LA6- □□ TN □□
Sweep Durability: Total amplitude 0.3 mmp-p (10 - 57.5 Hz),
Acceleration: 20.0 m/s2 (57.5 - 150 Hz)
Fixed Vibration Frequency Durability: Acceleration 10.0 m/s2
500VAC for 1min between terminals and chassis without breaking insulation
Display Color
red (1000 mcd) yellow (1700 mcd) green (2600 mcd) blue (1000 mcd) white (1250 mcd)
3
3 Mounting Surface Thickness
Range: 16mm or less.
L L Bracket Dimensional Drawing
(Typical Luminous Intensity)
Purple (800 mcd) pink (850 mcd) cyan (2150 mcd) lemon (2150 mcd)
* Due to the characteristics of the LED elements, a variation in difference of the color tone and
brightness of every product may occur.
Flash Rate
60 ±2 fpm
2400Hz Rapid intermittent beep
No. 4
2400Hz Fast intermittent beep
No. 5
3600Hz Continuous beep
No. 6
3600Hz Rapid intermittent beep
No. 7
3600Hz Long intermittent beep
No. 8
3600Hz Fast intermittent beep
No. 9
2400Hz & 3375Hz Multiplexed Beep
No. 10 2400Hz & 3600Hz Multiplexed Beep
Environmental Condition Alarm Sound No.1 measured from the front direction of the alarm opening at 1m
The set up button is the fourth step (Factory Default: Maximum).
Volume Control
[Maximum] -> [-5dB drop from maximum (standard)] -> [-10dB drop from maximum
(standard)] -> [OFF] (-> Returns to [Maximum])
Data Transfer Main Unit
Interface
Transfer Cable
USB micro-B Terminal Female
Data Programming
Application Software
Exclusive Application Software
(Downloadable from our Homepage)
（Unit: mm）
5
2.5
∅40
Mounting
Hole（∅5）
Nameplate
Location
Maximum: 85dB
Top View
(Unit: mm)
2
12
No. 2
2400Hz Long intermittent beep
Outer
Dimension
6 ∼ 17
(10)
2400Hz Continuous beep sound
No. 3
(Alarm Direction)
Mounting
Hole（∅5）
5
0°
12
No. 1
Front Direction
No. 11 4000Hz & 4800Hz Multiplexed Beep
32
20
60
81
Side View
Mounting
Hole（∅5）
Wiring Hole
Bottom View
4.5
31
（∅12※2）
66
( TN Type)
※2 Use φ23 for Cable Gland
(34.6)
2-
81
11
Model Code
USB2.0/1.1 Interface, Transmission Rate: USB2.0/1.1/1.0
Charge /Data Transfer Micro USB (not included); Connector: USB Male- USB (MicroB) male
Signal Tower
LA6-3DTN □ B
480g
LA6-3DLJ □ B
980g
LA6-3DTN □ N
420g
LA6-3DLJ □ N
930g
LA6-5 DTN □ B
590g
LA6-5 DLJ □ B
1090g
LA6-5 DTN □ N
Remarks
L Bracket
〈Note〉Cable gland is not included with this product.
More than 1Mohm at DC500V between the power input lead and chassis.
Withstand Voltage
Compliance Standards
313.5
Cable
Gland
Insulation Resistance
Mass (Tolerance 10%)
294
Wire Length：1060
Environmental Condition Tested while installed in an upright position
Sound Level
284
60
2 TN Type Underside View
Cable Gland Mounting Screw Hole
（M16×1.5 Effective Screw Length: 12mm）
JIS C 60068-2-6:2010
Alarm Sound
(Typical Frequency)
1 Mounting Surface Thickness Range: 4mm or less.
0°
Vibration Resistance
8.5
∅60
10
Protection Rating
40
10
1
∼
Mounting Location
70
530g
LA6-5 DLJ □ N
RoHS Directive (EN 50581)
UL508, CSA-C22.2 No.14
KC ( KN 61000-6-4, KN 61000-6-2)
FCC Part 15 SubpartB Class A
CE Marking
①
LA6-5DTNUB-RYGBC
D
②
③
④
⑤
・Mounting/Wiring…Direct Mount/Terminal Buss
・LED Tiers…5
・Color…Red/Amber/Green/Blue/White
・Body Color…Silver
・Flashing・Alarm…with Flash and Alarm
① LED Tiers ② Mounting/Wiring
3: 3 Tiers TN: Direct/Terminal
5: 5 Tiers LJ: Steel Pole & Angle
・Cable
1040g
EMC Directive (EN 61000-6-4, EN 61000-6-2)
LA6-
Example:
③ Body Color
W: Off-white
U: Silver
④ Flashing/Alarm
B: With
N: Without
⑤ Color
RYG: 3 Tiers
RYGBC: 5 Tiers
※The LED light color for each tier can be changed after purchase. ※LJ type does not have a "U" (Silver) specification.
UL Recognized Component (File No.E215660)
See
More,
Do
More!
Embedded Software Program,
Wiring
External Contact
Classification
Contact Relay
Don’t Apply Voltage!
LA6
N No Flashing/Alarm
B
External Contact
Classification
PLC
（NPN Transistsor）
Flashing/Pulse Enable
External
Contact
Flashing/Alarm
Don’t Apply Voltage!
LA6
N No Flashing/Alarm
B Flashing/Alarm
Flashing/Pulse Enable
Brown / ⑨
C o mmo n Li n e
LED Tier 1/ Input1
Red / ①
LED Tier 2/ Input2 Orange / ②
LED Tier 3/ Input3 Green / ③
LED Tier 4/ Input4
Blue / ④
LED Tier 5/ Input5 White / ⑤
Purple / ⑥
Alarm 1/ Input6
Lt. Blue / ⑦
Alarm 2/ Input7
Pink / ⑪
Mode Change
LED Tier 1/ Input1
LED Tier 2/ Input2 Orange / ②
LED Tier 3/ Input3
Green / ③
Blue / ④
LED Tier 4/ Input4
LED Tier 5/ Input5 White / ⑤
Purple / ⑥
Alarm 1/ Input6
Lt. Blue / ⑦
Alarm 2/ Input7
Pink / ⑪
Mode Change
Lighting/Alarm
Power Supply Wire Gray / ⑩
Power Supply Wire Yellow / ⑧
B Flashing/Alarm Type
To set a variety of colors or use different mode features.
Flashing/Pulse Enable
PLC Output Unit 2
Flashing/Pulse Enable
Brown / ⑨
C om m on L i n e
External
Contact
PLC
Lighting/Alarm
PLC Output Unit 1
Circuit Diagram
C
E
Gray / ⑩
Power Supply Wire
Power Supply Wire Yellow / ⑧
DC 24V (Class2) (Non-polarized)
B
B Flashing/Alarm Type
DC 24V (Class 2)
Inaba Bldg 4-11-14 Itachibori, Nishi-ku, Osaka, Japan 550-0012
International Division, Sales and Marketing Department
E-mail: overseas@patlite.co.jp
TEL: +81-6-7688-5400 FAX: +81-6-7688-5401
20130 S. Western Ave. Torrance, CA 90501, U.S.A.
TEL: +1-310-328-3222 FAX: +1-310-328-2676
Am Soeldnermoos 8, D-85399 Hallbergmoos, Germany
TEL.+49 -811 9981 9770-0 FAX.+49-811 9981 9770-9
E-mail: info@patlite.eu
A-2603, Daesung-D-POLIS, 543-1 Gasan-dong, Geumcheon-gu, Seoul, 153-719
TEL.+82-2-523-6636 FAX.+82-2-861-9919
E-mail : sales@patlite.co.kr
E-mail: sales@patlite.com
No.2 Leng Kee Road, #05-01 Thye Hong Centre, Singapore 159086
TEL: +65-6226-1111 FAX: +65-6324-1411
E-mail: sales@patlite.com.sg
7F. No. 91, Huayin St, Datong District Taipei, Taiwan R.O.C
TEL.+886-(0)2-2555-1611 FAX.+886-(0)2-2555-1621
E-mail: info@patlite.tw
LOT 321 Batamindo Industrial Park, Jalan Beringin Mukakuning, Batam 29433 Indonesia
TEL: +62-770-61-1123 FAX: +62-770-61-2444
Room 512, Jufeng Business Building, No.697-3 Lingshi Road, Shanghai China 200072
E-mail: sales@patlite.cn
TEL: +86-21-6630-8969 FAX: +86-21-6630-8938
PATLITE ECO PROJECT
For the benefit of mankind and the earth,
Patlite is committed to developing
environmentally friendly products.
To ensure correct use of these products, read the “Instruction Manual” prior to use. Failure to follow all safeguards can
result in fire, electric shock, or other accidents.Specifications are subject to change without notice.
Catalog No.
K-3111A
1410 M/M(SM)A
www.patlite.com
http://www.patlite.com
Full Color Display
See More, Do More!
Display a variety of colors in various ways to improve your processes.
PATLITE innovation continues with improved functionality to drive productivity, improve efficiencies, and reduce waste. One of our basic themes is to help you make
continuous improvements in your process. In order to make your lives more “comfortable”, our theme of “Visual Information” has been a persistent one by making things
easier to do. Here, we introduce the LA6 multi-informational signal tower. It can be easily manipulated to display various colors and combination of colors in various
ways in order to communicate “visual information” in a manner that is intuitive and easy to understand. The applications are endless. As a pioneer manufacturer of
information display equipment, we will strive to provide society the best products in order to meet your expectations for “Safety, Security, and Comfort”.
•
Indicate abnormal conditions with a variety of color patterns.
Can freely set up multiple colors.
For example, a serious condition can be indicated with the "All-point Lighting" where the
entire signal tower is the same color, thus conveying important information.
•
Use "Operating Modes" to enhance a visual status condition.
The downloadable program can be used to make patterns change at set intervals so the
signal tower can be used to count time or set a pace.
•
Simple and easy to use complimentary programming software
The downloadable complimentary programming software can be used to easily control
which colors are displayed and how they are to behave.
"More active, more flexible and beautiful"
"RevoliteTM" was made to redefine "light" and to make the
environment more active, more beautiful, and more flexible.
Separate Display
Tact time Display
1
Gradition Display
2
Case File
Case File
"Factory / Production Line"
See More to reduce downtime, improve productivity, and improve efficiency
"Public / Institution"
See More through intuitive, quietly visual, and reliable communication
Time Trigger Type
5 min.
Case1
Assembly Line
15 min.
25 min.
Duration of Turntable Operation
Case1
Check out the video
on our website!!
Productivity can be improved by assigning a task for each tier that is lit so that
operators can know if they are on pace or not. No external controls are required to set
up the takt time.
Time Trigger Type
Lighting Method: "Takt Time Display"
Display elapsed time in “real time” by counting
the number of tiers that are lit.
Baggage Conveyors
Check out the video
on our website!!
Flashing lights can help alert people that a baggage conveyor is about to start, thus
reducing accidents. Different color lights can also be used to match airline colors so
it's easier for passengers to know which carousel to go to.
Lighting Method: "Sine Curve Display"
Changing the light intensity allows for a more
subtle way to communicate operation status.
Simple Display Type
Serious Error
Case2
3
Processing Machine
Slight Error
Needs Maintenance
Checkout Busy
Case2
Check out the video
on our website!!
When there are many processing machines it is important that any trouble or need for
maintenance is quickly communicated. This can be easily accomplished with
predetermined color arrays, as shown on the example on the right. The various colors
or intensity of colors will allow problems to be addressed quickly, thus improving
productivity and reducing down time.
Simple Display Type
Lighting Method: "Detailed Error Display"
The level of information (serious error, slight error)
can be expressed colorfully.
Check-out Registers
Checkout Open
Check out the video
on our website!!
Different colors can designate a busy or open checkout register in larger
supermarkets. This allows customers to be able checkout quicker and balances
cashier's workload. Special light patterns can also be used to communicate between
cashiers and their supervisors or other employees.
Lighting Method: "All-point Lighting Display"
An "All-point Lighting Display" can use all sections of the
LA6, such as displaying the light sequentially to
simulate movement at a checkout register, and an
all-solid color can be displayed when the lane is open.
4
View our videos at our exclusive site for more information.
Features and various product operation modes can be viewed at our exclusive site (www.patlite.com/LA6). The contents
introduce actual applications, ideas for applications, and wide-spread potential for this product.
A new lens design optimizes visibility.
An internal Mode Switch is available.
The newly developed lens design efficiently
diffuses LED light so that it is unmistakably
visible, even from great distances.
Use the internal mode switch to easily set up
various functions, such as the alarm volume.
Product Features
Factory / Production Public/ Institutions
Applications
Case1
Q&A
Assembly Line
By rendering a visual task with the use of elapsed time in a product
line, production can advance by checking whether work progress is
relevant, and it contributes to an improvement in efficiency. Tact
time setup does not require any external control programs, either.
5 min.
15 min.
25 min.
Lighting Method: "Tact Time Display"
Display working hour progress with a
section number.
Replacement Parts
Case2
Processing Machine
At the factory with many processing machines at work, the sign of
trouble or periodic maintenance can be managed by displaying
easily comprehensible color arrays to grasp the circumstance of
Product Features
Factory / Production Public/ Institutions
Applications
all equipment in a diverse "luminescence color", and stablize their
Q&A
operation. If an abrupt increase occurs, quick action based on
information already displayed can be determined.
Serious Error
Slight Error
Needs Maintenance
Lighting Method: "Detailed Error Display"
Freely change luminescence colors
and patterns with editing software.
The level of information (serious error, slight error)
can be expressed colorfully.
Exclusive Site/ Top Page
Upload colors and patterns using the editing
program to the signal tower using an USB
cable* connected to a PC.
* The USB cable is sold separately (USB microB
type with Charging/ Data Transfer capability).
* The website design may change without notice.
Check out the video
on our website!!
Exclusive Site/ Application Page
• Headcover
Free editing software can be downloaded from our exclusive website.
With the simple editing software available for free, a "luminescence color" and "luminescent pattern" are easily set-up.
Sound
Product Features
Factory / Production Public/ Institutions
Applications
Q&A
Product Features
Factory / Production Public/ Institutions
Applications
Q&A
• USB Port Cover
Diffusion &
Water Resistance
Product Features
Factory / Production Public/ Institutions
Applications
Q&A
4. Download Completed
The alarm has a total of 11 sounds to
match various applications.
1. Go to our exclusive website
The water-resistant speaker design is able to
play clear sounds of up to 85 dB (at 1m)
despite it's compact size. Alarm sounds can be
set up with every display pattern.
2. Download the Dedicated
Software from the website
3. Customer registers on a
registration page
• Waterproof Ring ‘B’
Easily set up an operation pattern.
1. The "Smart Mode" uses various colors to display information
A. Single-display Type
31 luminescent patterns are stored in the unit's
memory and can be set to on/off for 1-5 tiers.
Off-white
• Pole Bracket
(with Waterproof Ring and Screws)
B. Time-trigger Type
Up to 15 groups of up to 63 patterns can be
controlled as a continuous flow based on
preset times.
• Waterproof O-ring
Dedicated software setup screen
• 3 Tier Type
• 5 Tier Type
Pulse-trigger Type is activated by discrete inputs
instead of time to progress from one pattern to the
next, for up to 63 patterns. These can be grouped for
up to 15 groups.
Signal Tower
∙ Voltage: DC24V
∙ Alarm: 11 Sounds
∙ Wiring: 2 types
(Screwless Terminal (TN)) or (Cable (LJ))
LED
IP65
DC24V
2. "Signal Tower Mode"
This mode simply displays information
like a standard Signal Tower.
85dB
Four new color selections are available in addition to
the five standard luminescence colors.
(at 1m)
Lighting
5
Silver
Off-white
Silver
Flashing/Alarm
Off-white
Silver
Lighting
Off-white
Silver
Flashing/Alarm
Steel Pole
Type (L J)
3 Tier Type
5 Tier Type
Φ60
Set-up data can be downloaded.
※ Alarm type
is rated at IP54.
Off-white
C. Pulse-trigger Type
* The interface design may be changed without advanced notice.
Several pre-programmed patterns can be uploaded to the unit from the "Information Set."
6