ceramic
Recessed downlights,
wall washers, adjustables,
cylinders and multi-lamp
products for T4, T6, MR16,
PAR and ED ceramic metal
halide lamps
metal
halide
lighting
Page Index (Use the table below to find the appropriate page number.)
Multi-Lamp and Accent
Designer Cove
T4/T4.5
SuperMini T4
MiniMasterColor®
T6
MR16
PAR20
PAR30
PAR38
ED-17
Designer Cove
Multi-Spot
(trimless)
AVIO
(recessed)
AVIO
Adjustables
(surface mount)4” 6” 8”
Semi-Recessed
6” 8”
14
15
16
3031
14
15
16
3031
14
15
16
3031
17
18
19
32 3334
20
21
22
23
23 35
24
36 43 44
25
26 3739 45 46
25
37, 38 39, 40
47
48
27
49, 50
Dura-Life
Downlights (open)
Downlights (lensed)
Downlights & Wall Wash
Pulldown
6” 8”
Spreadlens
Wall Wash
Cylinders
8”
9”
12”9”4”6” 8” 9”10” 12”6”8”10”12”12”2”6”8”9”12”
Cylinder Vert.Horz.
T4/T4.5
SuperMini T4
MiniMasterColor®
T6
MR16
PAR20
PAR30
PAR38
ED-17
BT/ED-28
ED-37
60
61
88
60
61
88
60
61
88
54
62
63
64
89
90
65
66
67
68, 69
67
68, 69
91
92
98
99
55
57
70
71
72
73, 74 75, 76, 77 78
79 80, 81 82, 83 84, 85
93
94 100, 101102, 103
56747681
8385
102, 103
76
The industry’s most
comprehensive product
line now provides the most
sustainable solutions.
The Indy CMH Downlight family
Ambient, accent, wall wash or task lighting,
the Indy CMH product line offers a selection of
fixtures ideally suited to the job at hand.
When it comes to commercial lighting, no one can match
The high performance, cost-effective solution
Indy products for quality, versatility and selection. Downlights,
There’s more to the cost-saving story than reduced energy
wall washers, adjustables, cylinders, multi-lamp fixtures… Indy
consumption and extended lamp life. Many of the Indy CMH
Commercial Downlights has it all.
fixture styles are designed for the compact,
ultra-efficient T4 and T6 lamps. These high-
Now, the entire Indy family is available with a full range of
performance lamps can cover a broad range of
ceramic metal halide lamps and efficient electronic ballasts,
commercial lighting applications with just one or
helping designers to comply with more stringent energy codes
two wattage ratings. With fewer lamps to stock,
and to achieve LEED certification requirements.
maintenance is quicker and easier, and relamping
For Accent Lighting
CMH lamps require less than half the watts to produce the
same light output as halogen. Less watts equate to less heat.
So, the subsequent reduction in air conditioning requirements
results in even greater energy savings.
errors become a thing
of the past.
For General Lighting
Electronically ballasted CMH downlights can match CFL
performance and installed costs with even greater energy savings.
Visit our website for more information, junolightinggroup.com
3
Interchangeable Locked Optics
One of the advantages of using Indy CMH
fixtures equipped with T-series lamps is that
the optics are “locked.” Unlike fixtures where
beam spread is controlled by the lamp alone
(PAR and MR lamps are good examples),
Indy CMH fixtures for T-lamps use the design
of the fixture and reflector for total optical
control. Because the T-lamp serves strictly as
Adjustable
a source of illumination, there is virtually no
Trac
Downlight
chance of lighting patterns being accidentally
altered during relamping… a situation that
occurs all too often when beam spread is
determined by lamp design alone.
Indy CMH fixtures have taken this concept a
step further with a proprietary feature called,
Multi-Spot
Designer Cove
“interchangeable” locked optics. All T-lamp
fixtures have optional reflectors that can be
quickly and easily interchanged, permitting
lighting characteristics to be reconfigured
as required. It’s the best of both worlds:
Spot
(8°-14°)
Narrow
(22°-30°)
Flood
(35°-44°)
Optional reflectors provide interchangeable locked optics.
Tru-Lock™ bar hanger system
saves time and money
Indy fixtures install quickly and easily thanks to
the proprietary Tru-Lock bar hanger system that
makes suspended ceiling applications a snap.
Slots at the ends of the mounting bars slip directly
over standard ceiling T-bars and lock securely in
position with a single screw. Three self-locating
notches along the length of the Tru-Lock bars
permit fast, repeatable fixture positioning in tile
centers or in quarter-tile increments.
4
locked optics with the flexibility to adapt to
changing environments.
Indy Benefits for a complete solution
• Lamp Sensing Switch Option* (Simplify Maintenance)
Because electronic ballasts have sensing circuits to detect
the end of lamp life, a ballast connected to an inoperative
lamp will likely be in a “shut down” mode. When the lamp
is replaced, the power to the ballast must be cycled off and
back on for the ballast to re-start the lamp. However, when
the power is cycled off and back on via a circuit breaker or
switch, other fixtures on the same circuit will extinguish and
not come back on until the lamps cool. Lamp maintenance
can be simplified by using Indy’s patent pending Lamp
Sensing Switch option. When the lamp is removed, the switch
automatically cuts the power between the ballast and the
primary. When a new lamp is installed, power is automatically
restored to the ballast.
*Consult factory, this option not available on all fixtures
Maintenance is
simplified with
the optional
lamp sensing
switch builtin to Indy CMH fixtures. During lamp replacement, the switch
automatically turns the ballast off and back on to permit normal
re-starting of the new lamp. This greatly reduces time and
expense when troubleshooting lamp outages.
• Dura-Life System (Cut your lamp maintenance in half!)
The unique, energy-efficient Indy Dura-Life system offers
extra-long relamping cycles, making it the ideal choice for
locations where lamp maintenance is difficult or costly or
security is a concern. The patented design economically
doubles the operating lamp life of an H.I.D. downlight
without sacrificing light output or efficiency.
Turn to page 53 for more information on these innovative
luminaires.
Reflectors with a difference
Every Indy CMH fixture represents the optimum balance between brightness
control, optical efficiency and aesthetics. Each style features uniform, matching
Clear Specular
Clear Satin
apertures that perfectly complement each other in every décor. Indy CMH
downlights feature Cascading Vector™ reflector designs that produce high-angle
visual cutoffs where the fixture’s lamp becomes visible with its reflected image.
Gold Specular
Gold Satin
Visual comfort is achieved without sacrificing luminaire efficiency, a critical
consideration in complying with today’s strict energy codes.
Downlight reflectors are precision spun from heavy gauge aluminum and
Wheat Specular
Wheat Satin
have a built-in trim flange that matches the selected reflector finish. Indy CMH
reflectors are available in a wide range of elegant colors in both specular and
satin Alzak® finishes. Low iridescent is provided to eliminate “rainbowing”
whenever necessary. Custom finishes can be special ordered, and the trim
Pewter Specular
Pewter Satin
Bronze Specular
Bronze Satin
flange can be specified with a white, painted finish.
5
Elicit a Stronger Buying Response
The contrast between merchandise and the
background, known as the luminance ratio,
is what determines the perceived brightness
of a display. Higher luminance ratios can be
achieved in a very energy efficient manner
using CMH lamps, resulting in more impactful
displays and a stronger visual hierarchy
throughout a store. Higher illumination levels
on merchandise also brings out colors and
details that can elicit
a stronger buying response.
The Indy difference
At Juno Lighting Group, we pride
ourselves on having everything
you could possibly require for your
commercial lighting project, as well as
the service and expertise to make it
all happen. We know the commercial
lighting business inside and out and
are dedicated to providing you with
the exact products you want, when
and where you need them.
But the most important thing we have to offer is peace
With extensive in-stock
of mind. When you order Indy CMH commercial
inventories and an aggressive
fixtures, you are assured of a total solution that will
lead-time program, we can
exceed your requirements for lighting performance,
offer the fastest, most reliable
aesthetics, energy efficiency, ease of installation,
deliveries in the industry.
and low maintenance. You can be confident that
And with unsurpassed
every product has been expertly engineered and
design, testing and product
manufactured to the highest standards using the most
certification capabilities, we can
advanced materials and technologies. And we back it all
respond quickly to your customization and make-to-order
up with exceptional pre- and post-sale service.
requests.
Visit our website for more information, junolightinggroup.com
7
Energy Efficiency of CMH Technology
The challenge to reduce energy use
Electronically Ballasted CMH Advantages for
General Illumination
has never been greater. Whether due
to the ever-increasing adoption and
enforcement of national or local energy
codes, the need to reduce operating
costs to improve corporate profitability,
or the desire to be “green” and act
as the best possible steward of the
environment, Indy Performance Series
CMH fixtures offer an outstanding
solution to help meet any of these
challenges.
The following example illustrates how using electronically ballasted CMH downlights can result
in a more cost effective and energy efficient solution versus magnetically ballasted CMH or
compact fluorescent downlights.
Downlight Types
Lamp Specifications
Mean Lumens*
Hours Life
Luminaire Specifications
Electronic CMH
Magnetic CMH
Electronic CFL
MHC100/C/U/MP/3K
MHC100/C/U/MP/3K
CFTR42W/GX24a
(100W)
9085
15,000
M8-ED-100E+M800W-CL
(100W)
7900
12,500
M8-ED-100M+M800W-CL
(2x42)
6400
10,000
C9H-266/42T+C952-CL
Input Watts
110
125
Max Amps
.9
2.3
93
.8
Ballast Factor
1.0
1.0
.97
Spacing Criteria
1.4
1.4
1.2
Fixture Efficiency
63.8%
63.8%
66.9%
Total Fixture Lumens**
5506
4788
3945
90 Fixtures
100 Fixtures
121 Fixtures
# of 20amp Branch Circuits
6
17
6
Maintained Foot Candles
50
50
50
Fixture Layout
All layouts assume
a 100’ x 100’ space
w/10’ Ceilings
Total Watts
11,253
1.13
Installation Costs***
$36,780
$37,995
$35,113
Initial Fixture/Lamp Cost
$26,910
$25,000
$22,143
$870
$2,955
$870
Fixture Installation
$9,000
$10,000
$12,100
Annual Operating Costs****
$6,359
$8,112
$6,787
$5,203
$6,570
$5,939
$1,156
$1,542
$848
Energy Cost
Lamp Replacement Cost
Total 5 Year Cost
8
12,500
1.25
Branch Circuit Wiring
Electronically ballasted CMH downlights
with a wide distribution reflector can create
comparable footcandle levels to CFL
downlights using fewer luminaires.
9,900
.99
Watts/Sq. Ft.
$68,575$78,555 $69,048
*Mean lumens for electronically ballasted CMH lamps are generally acknowledged to be 10-15% higher than published lamp data,
which is based on magnetically ballasted operation.
**Mean Lumens x .95 LDD x BF x fixture efficiency.
***Fixture installation @ 100/fixture. Wiring costs @ $45/circuit. $300/”Home Run.”
****Annual lighting energy cost at $.12/KWH and 4380 hours per year (12 hours/day, 7 days per week) Lamp replacement cost @ $5/
lamp change + $11/CFL Lamp, $39/CMH Lamp. Additional savings realized from lower HVAC equipment and operating costs are
incremental to this analysis.
Ceramic Metal Halide (CMH) lighting has
become the preferred light source for
commercial, retail and display lighting
applications. With its outstanding
cmh vs. halogen: accent lighting performance comparisons
On a direct one for one replacement, as illustrated below, Ceramic Metal Halide lamps offer
higher levels of accent lighting with which to highlight merchandise and displays while offering
considerable energy and operating cost savings.
efficacy, reduced maintenance and
exceptional dimensional and color
rendering capabilities, Indy CMH fixtures
are the energy efficient answer for
CMH
Halogen
VS.
39W PAR30L CMH
100W PAR38HIR
CMH39/PAR30L/FL25
Lamp Designation
100WPAR38/HIR/FL25
25 Degrees
Beam Spread
25 Degrees
45 Watts
Total Input Watts
100 Watts
11,000
Max. Center Beam Candlepower
7,000
10,000 Hours
Lamp Life
3,000 Hours
Center Footcandles
Mounting Distance
Center Footcandles
306
6´ (2´-10˝)
194
172
8´ (3´-7˝)
109
110
10´ (4´-6˝)
70
76
12´ (5´-5˝)
49
56
14´ (6´-2˝)
36
$23.65
Annual Energy
Cost Per Lamp*
$52.56
$2.19
Annual Per Lamp
Relamping Costs**
$7.30
$25.84
Annual Operating
Labor Costs
$59.86
today’s lighting challenges.
(Beam Diameter)
Annual Per Lamp
Operating Cost Savings
CMH vs. Halogen
CMH lamps use less than half the energy
of halogen and last up to three times as
long, meaning annual operating costs are
substantially reduced.
$34.02
*(Total input watts x 12hours/day x 365
days/year x $.12 KWH) / 1000
**($5/lamp change x 4380 Hours of
operation per year) / Lamp life
Additional equipment and operating cost
savings will also be realized as a result of
a reduced HVAC load.
Reduce Energy Consumption
Typically, CMH fixtures are chosen to replace halogen fixtures on a one-for-one basis. As shown in the comparison below, equivalent light output is
readily achievable with significantly lower wattage CMH lamps. This can yield up to 75% less energy use, which translates to lower operating costs,
while also significantly reducing energy code calculations. In addition, CMH lamps offer 2-3 times greater life than their halogen counterparts. Replacing
multiple halogen fixtures with a single Indy CMH fixture can yield even greater savings. Example of typical replacements include:
Halogen Fixture
Being Replaced
Indy CMH
Fixture Replacement
Wattage
Reduction
Relative
Light
Output
Energy
Savings Over
Life of Lamp
CMH Avg.
Rated Life
(hrs)
50W MR16 25°
20W MR16 CMH 25°
26W
91%
$37.44
12,000
50W MR16 25°
20W T4 GU6.5 CMH 25°
26W
108%
$37.44
12,000
75W PAR30 25°
20W T4 G8.5 CMH 23°
51W
126%
$73.44
12,000
90W PAR38 25°
39W PAR30 CMH 30°
45W
157%
$48.60
9,000
100W PAR38 HIR 25°
70W PAR38 CMH 25°
25W
157%
$30.00
10,000
100W PAR38 HIR 25°
39W T6 G12 CMH 24°
55W
161%
$99.00
15,000
Selecting the Right Lamp
Ceramic Metal Halide Lighting
Whether you are highlighting apparel,
produce, furniture, home accessories or other
merchandise, lighting continuity within a space
creates a visual, well organized appearance.
Selecting the right lamp is a critical step in
the process of designing any space. All CMH
lamps offer the combined advantages of
energy efficiency, long life and color
rendering that no other single light source
can offer.
A wide range of lamp wattages, lamp
envelopes, lamp bases and individual
performance characteristics can make
CMH lamp selection an overwhelming task.
In this section, we describe the CMH lamps
that can be specified for use with Indy fixtures,
detailing their distinct features and benefits
to simplify this step in the fixture selection
process. As always, be sure to consult with
your Indy sales professionals to insure you
obtain the best performing lamp/fixture
combination available for
your application.
Create More Dramatic Displays
CMH lamps offer a high light level from a
much smaller source than fluorescent lamps,
resulting in very compact fixture designs.
They lend themselves well to applications
where the light needs to be directed or
controlled, producing better light where it
is needed and giving rise to more dramatic
lighting effects. The inherently higher lumen
packages allow the designer to achieve
reasonable illumination levels in high ceilings
applications.
10
CMH MR16 GX10
CMH Mini T4 GU6.5 & PGJ5
SuperMini T4
The CMH MR16 replicates the size and
performance of a 50W halogen MR16
lamp. It is the lamp of choice when the
smallest fixture design is the primary
objective. It offers the most light in the
smallest fixture package available –
perfect for niche display lighting.
• Provided with integral cover glass –
no additional lens required
• Easily installs due to its robust GX10
twist-and-lock base
• Available in three beam spreads –
spot, flood and wide flood
• Integral reflector – new reflector
with every lamp change
• Up to 12,000 hour lamp life with no
perceived shift in color temperature
• Crisp, white light in 3000K color
temperature with a color rendering
of 80+
• Lamps are currently available in
20 Watts
CMH T6 G12 Bi-Pin
CMH T4/T4.5 G8.5 Bi-Pin
Mini MasterColor®
The CMH T4 SuperMini or the Mini
MasterColor® lamps enable custom optics
to deliver increased light output vs. the
CMH MR16, while maintaining a small
fixture profile. Perfect for creating dramatic,
colorful displays.
• Both lamps offer a twist-and-lock base
for quick & easy relamping
• The T4 SuperMini comes with a GU6.5
base
• The Mini MasterColor comes with a
PGJ5 base
• Fixtures offer computer-contoured
faceted reflectors available in three
custom beam spreads – spot, narrow
flood and flood
• Up to 12,000 hour lamp life with no
perceived shift in color temperature
• Crisp, white light in 3000K color
temperature with a color rendering of
80+
• Lamps are currently available in 20 Watts
CMH ED17 Medium Base
The CMH T6 lamp offers the greatest
efficacy available. The porcelain lamp
base has a flat bottom for consistent
lamp alignment. Its robust bi-pins resist
breakage and help guide lamp insertion
during fixture maintenance. The T6 is
the lamp of choice when the maximum
light output and precision performance is
required.
The CMH ED17 lamp offers a high lumen
package in a larger size medium base
lamp. The ED17 lamp was the first lamp
introduced with a CMH arc tube. It is the
lamp of choice when lamp life and overall
operating costs are the key design criteria.
It also allows lamp standardization when
remodeling existing spaces that already
use ED17 downlights.
• G12 bi-pin lamp base simplifies lamp
replacement
• Often used in recessed downlights,
the T6 lamp can simplify maintenance
within a space by enabling only one
lamp type to be used
• Fixtures offer computer-contoured
faceted reflectors available in three
custom beam spreads – spot, narrow
flood and flood
• Up to 15,000 hour lamp life with no
perceived shift in color temperature
• Crisp, white light in 3000K or 4200K
color temperatures with a color
rendering of up to 90+
• Lamps are available in 39-150 Watts
• Familiarity of a medium screw-base lamp
simplifies maintenance
• Often used in recessed downlights,
the ED17 lamp can simplify maintenance
within a space by enabling only one
lamp type to be used
• Fixtures offer Cascading Vector™
reflectors with high angle visual cutoff
where the lamp appears with its
reflected image
• Up to 20,000 hour lamp life with no
perceived shift in color temperature
• Crisp, white light in 3000K or 4000K
color temperature with a color
rendering of 90+
• Lamps are available in 50-150 Watts
The CMH T4 lamp offers a higher lumen
package than the Mini T4 lamps while
still maintaining a small T4/T4.5 diameter
lamp envelope. Offered in a wider range
of wattages than the T4 SuperMini, Mini
MasterColor® and MR16, the T4 G8.5
lamp provides more light to satisfy more
demanding lighting applications.
• G8.5 bi-pin lamp base simplifies lamp
replacement
• Often used in recessed downlights,
the T4 lamp can simplify maintenance
within a space by enabling only one
lamp type to be used
• Fixtures offer computer-contoured
faceted reflectors available in three
custom beam spreads – spot, narrow
flood and flood
• Up to 15,000 hour lamp life with no
perceived shift in color temperature
• Crisp, white light in 3000K or 4200K
color temperatures with a color
rendering of up to 90+
• Lamps are available in 20-70 Watts
CMH PAR Medium Base
CMH PAR lamps offer a wide range of
lamp wattages, color temperatures and
beam spreads. Since these lamps are
provided with an integral lens, CMH
PAR lamps are the lamp of choice when
simplicity and ease of maintenance is
the primary design concern.
• Familiarity of a medium screw-base
lamp simplifies maintenance
• PAR lamps are available in PAR20,
PAR30L and PAR38 sizes with a
range of lumen packages and beam
spreads
• Up to 13,000 hour lamp life with no
perceived shift in color temperature
• Crisp, white light in 3000K or 4000K
color temperature with a color
rendering of up to 90+
• Integral reflector – new reflector
with every lamp change
• Lamps are available in 20-150 Watts
Indy CMH Adjustable Accent features:
• Ceramic metal halide lamps save energy and reduce • Universal mounting brackets accommodate Tru-Lock and relamping costs.
industry standard linear bars, 1/2” EMT, and 3/4” and • Multi-lamp fixtures are fully adjustable for tilt and rotation.
1-1/2” C-channels.
Styles include Designer Cove, Multi-Spot, and AVIO.
• UL/C-UL Listed.
• Interchangeable locked optics for T-lamps use optional • A host of options and accessories enhances both reflectors to provide beam spread flexibility.
functionality and versatility.
• Proprietary, self-centering Tru-Lock bar hanger system for suspended ceilings saves time; cuts installation costs.
• Optional suspended-cable mounting offered for AVIO.
CMH
Multi-Lamp
Fixtures
The Indy CMH product line includes a selection of multilamp adjustable luminaires for efficient, economical and
attractive accent lighting. Each fixture style represents
a unique lighting solution and offers the cost-saving
advantages of energy efficient, long life, ceramic metal
halide lamps.
The Designer Cove multi-lamp fixture is available in one,
two or three lamp versions. The lamp holders are mounted
in adjustable yokes, allowing up to 45º of tilt and 355º of
rotation. Semi-recessed versions are also available with up to 75º tilt. The universal-type housing installs in suspended
grid, plaster, or drywall ceilings, and the open design facilitates
narrow ceiling cutout.
Designer Cove
The Multi-Spot fixture is available in two or three lamp
versions and features a closed pan trim and integral snoots
to improve lamp shielding. Luminaires tilt up to 34º (45º
if the snoot is removed) and rotate 360º. The universaltype housing installs in suspended grid, plaster, or drywall
ceilings.
Multi-Spot
For something truly unique in a multi-lamp fixture, the
Indy CMH product line offers AVIO. Available for one,
two, three or four MR16 CMH lamps, these contemporary
fixtures feature a precision die-cast frame with curved
spanners, creating an arresting technical aesthetic. Adding
the optional airfoil-shaped trim lends a more sophisticated,
AVIO
sculpted look. The dual gimbal lamp mechanism allows full
rotation and 45º aiming. Standard colors are white, black,
silver and graphite, and the airfoil trims can be field painted
or covered with laminate to add a creative touch. AVIO’s
universal-type housing installs in suspended grid, plaster or drywall ceilings; however, the fixtures can also be surface
mounted with matching suspension cables. A track model is also available.
Visit our website for more information, junolightinggroup.com
13
DESIGNER COVE™ T4 CMH
OPEN APERTURE WITH WHITE TRIM FLANGE, Electronic ballast
9 1/8"
“A”
See chart for ceiling
Cutout dimensions
9"
# of Lamps
3
2
1
Ceiling Cutout
23 3/4” x 8 5/8”
16” x 8 5/8”
8 1/4” x 8 5/8”
A
22 3/4”
15 1/8”
7 1/2”
B
31 1/2”
23 3/4”
16”
“B”
product specifications
photometric data
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
Ballast: T4/T4.5 and T4 Mini – Universal
120/277 volt electronic solid state, high
power factor and reliable starting to -30°C
• BT5 – 120 volt electronic solid state, high
power factor and reliable starting to -20°C
Lamp Holder: T4/T4.5 – G8.5 bi-pin
socket base with recessed female contacts •
1A, 750V, rated for 5KV pulse • T4 Mini –
Twist and lock GU6.5 base; 2A, 250V rated
for 5KV pulse • BT5 – Twist and lock PGJ5
base; 2A, 250V rated for 2.5KV pulse
Adjustability: Yoke assembly allows 355˚
rotation and up to 45˚ tilt of lamp
Housing: Heavy gauge cold rolled steel
with white or black finish • Universal housing
design installs in suspended grid, plaster or
drywall
Lamp Guard: Clear tempered glass
Accessories: Up to three accessories may
be used simultaneously in each lampholder
including the optional snoot
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
D
MH
The beam spread in degrees and the
beam “L” and “W” in the above tables
are computed at 50% of centerbeam
candlepower and represent areas of
“effective illumination.”
W
Beam Beam Type Spread°
0
Aim Point
MH FC
W
30°
30°
L
L
Aim Point
Aiming Angle (A = 30)
0°
CBCP
0
L
Aiming Angle (A = 0)
Rated
Life
A
W
Aim Point
L
**Due to steep aiming angle, length of
beam extends beyond 25’.
Lamp
X
A
W
FC
L
W
70W T4
S
10°
Ceramic
Metal Halide
10,00050218
4 –‑ –‑
61395 1.0
8785 1.3
10502 1.7
12349 2.0
14256 2.4
–‑
–‑ –‑
1.0 907 1.4
1.3 5101.8
1.7 3262.3
2.0 2272.7
2.4 1673.1
–‑
1.2
1.6
1.9
2.3
2.7
N
27°
10,00014459
4 –‑ –‑
6402 2.9
8226 3.8
10145 4.8
12100 5.8
–‑
–‑ –‑
2.9 2613.9
3.8 1475.2
4.8 946.5
5.8 657.8
3.3
4.4
5.5
6.7
F
40°
10,0008651
4 –‑ –‑
6240 4.3
8135 5.8
10 87 7.2
12 60 8.7
–‑
–‑ –‑ –‑
4.3 1566.1 5.0
5.8 888.1 6.7
7.2 5610.1 8.4
8.7 3912.1 10.0
–‑
D FC
45°
X
L W
4392 6.9
6174 10.4
8 9813.9
1063 17.3
**** **
**** **
2.8
4.1
5.5
6.9
**
**
4113 6.9 9.3
6 5010.413.9
8 2813.718.6
1018 17.323.2
**** ** **
1.3
2.0
2.7
3.4
**
**
FC X
1111 4
494 6
278 8
178 10
** **
** **
L
W
1.4
2.0
2.7
3.4
**
**
1.0
1.4
1.9
2.4
**
**
3.8 320 4 4.0 2.7
5.8 142 6 6.1 4.1
7.7 80 8 8.2 5.4
9.6 51 10 10.2 6.8
** ** ** ** **
4 68 6.919.1 5.7 191 4 6.7 4.1
6 3010.428.6 8.7 85 6 10.0 6.1
8 17 13.938.211.6 48 8 13.3 8.2
1011 17.347.814.5 31 10 16.710.2
**** ** ** ** ** ** ** **
Photometric chart represents single lamp data at specified angle.
Lamp Multipliers:20W - .55
39W - .28
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Examples: 1-Lamp Unit: DCT4-N-20H-BL; 2-Lamp Unit: DCT4-SS-20H-BL; 3-Lamp Unit: DCT4-FSF-20H-BL
Beam Spread/
One per Lamp
1
2
3
Rough-In
DCT4
T4/4.5 MH
Lamp
G8.5 base
DCTM1
T4 Mini MH
Lamp
GU6.5 base
DCBT2
BT5 MH Lamp
PGJ5 base
14
Wattage/Lamp
S Spot (10°)
N Narrow Flood (27°)
F Flood (40°)
Note: See ordering
examples above for 1, 2
and 3-lamp units.
Finish
20H
(T4 Mini, T4/T4.5)
20W 120/277V Electronic
20H1
(BT5 only)
20W 120V Electronic
39H
(T4/T4.5 only)
39W 120/277V Electronic
70H
(T4/T4.5 only)
70W 120/277V Electronic
Example: HB-TL
Options
Accessories
WH White
BL Black
GE SuperMini T4
Philips Mini MasterColor® CDM-Tm
1
2
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
SRSemi-recessed
HB-TL
HB-52
HB-28
LB-27
Two 25” Tru-Lock grid ceiling bar hangers, Pair
Two 52” C-Channel Bar Hangers, Pair
Two 28” C-Channel Bar Hangers, Pair
Two 27” Linear Bar Hangers, Pair
T569BL
T561
T562
T563
T564
T565
T566
T5677
T5678
T5619
T5622
Louver-3 3/4” Dia. with 1/2 Sq. Cells
Pink Color Filter
Red Color Filter
Light Blue Color Filter
Medium Blue Color Filter
Amber Blue Color Filter
Green Color Filter
Prismatic Spread Lens
Linear Spread Lens
Color Correction Lens/UV Filter
UV Filter
† Consult Factory for Availability
MULTI-LAMP
D E S I G N E R C O V E ™ ( T rim l ess ) t 4 cmh
OPEN APERTURE, trimless, Electronic ballast
8 11/16"
See chart for ceiling
Cutout dimensions
A
# of Lamps
3
2
1
Ceiling Cutout
26” x 9”
17 1/2” x 9”
8 7/8” x 9”
A
10 3/8”
10 3/8”
10 3/8”
B
28”
19 1/4”
8 3/8”
B
product specifications
photometric data
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
Ballast: T4/T4.5 and T4 Mini –
Universal 120/277 volt electronic solid
state, high power factor and reliable starting
to -30°C
• BT5 – 120 volt electronic solid state, high
power factor and reliable starting to -20°C
Lamp Holder: T4/T4.5 – G8.5 bi-pin
socket base with recessed female contacts •
1A, 750V, rated for 5KV pulse • T4 Mini –
Twist and lock GU6.5 base; 2A, 250V rated
for 5KV pulse • BT5 – Twist and lock PGJ5
base; 2A, 250V rated for 2.5KV pulse
Adjustability: Yoke assembly allows 355˚
rotation and up to 45˚ tilt of lamp
Housing: Heavy gauge cold rolled steel
with white or black finish • Universal housing
design installs in suspended grid, plaster or
drywall
Lamp Guard: Clear tempered glass
Accessories: Up to three accessories may
be used simultaneously in each lampholder
including the optional snoot
Labels and Listings
UL/C-UL listed for damp locations • I.B.E.W. Union
made
Product specifications subject to change
without notice.
D
MH
The beam spread in degrees and the
beam “L” and “W” in the above tables
are computed at 50% of centerbeam
candlepower and represent areas of
“effective illumination.”
W
Beam Beam Type Spread°
0
Aim Point
MH FC
W
30°
30°
L
L
Aim Point
Aiming Angle (A = 30)
0°
CBCP
0
L
Aiming Angle (A = 0)
Rated
Life
A
W
Aim Point
L
**Due to steep aiming angle, length of
beam extends beyond 25’.
Lamp
X
A
W
FC
L
W
70W T4
S
10°
Ceramic
Metal Halide
10,00050218
4 –‑ –‑
61395 1.0
8785 1.3
10502 1.7
12349 2.0
14256 2.4
–‑
–‑ –‑
1.0 907 1.4
1.3 5101.8
1.7 3262.3
2.0 2272.7
2.4 1673.1
–‑
1.2
1.6
1.9
2.3
2.7
N
27°
10,00014459
4 –‑ –‑
6402 2.9
8226 3.8
10145 4.8
12100 5.8
–‑
–‑ –‑
2.9 2613.9
3.8 1475.2
4.8 946.5
5.8 657.8
3.3
4.4
5.5
6.7
F
40°
10,0008651
4 –‑ –‑
6240 4.3
8135 5.8
10 87 7.2
12 60 8.7
–‑
–‑ –‑ –‑
4.3 1566.1 5.0
5.8 888.1 6.7
7.2 5610.1 8.4
8.7 3912.1 10.0
–‑
D FC
45°
X
L W
4392 6.9
6174 10.4
8 9813.9
1063 17.3
**** **
**** **
2.8
4.1
5.5
6.9
**
**
4113 6.9 9.3
6 5010.413.9
8 2813.718.6
1018 17.323.2
**** ** **
1.3
2.0
2.7
3.4
**
**
FC X
1111 4
494 6
278 8
178 10
** **
** **
L
W
1.4
2.0
2.7
3.4
**
**
1.0
1.4
1.9
2.4
**
**
3.8 320 4 4.0 2.7
5.8 142 6 6.1 4.1
7.7 80 8 8.2 5.4
9.6 51 10 10.2 6.8
** ** ** ** **
4 68 6.919.1 5.7 191 4 6.7 4.1
6 3010.428.6 8.7 85 6 10.0 6.1
8 17 13.938.211.6 48 8 13.3 8.2
1011 17.347.814.5 31 10 16.710.2
**** ** ** ** ** ** ** **
Photometric chart represents single lamp data at specified angle.
Lamp Multiplies: 20W -.55
39W - .28
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Examples: 1-Lamp Unit: DCT4-N-20H-NT-BL; 2-Lamp Unit: DCT4-SS-20H-NT-BL; 3-Lamp Unit: DCT4-FSF-20H-NT-BL
Beam Spread/
One per Lamp
1
2
3
Rough-In
DCT4
T4/4.5 MH
Lamp
G8.5 base
DCTM1
T4 Mini MH
Lamp
GU6.5 base
Wattage/Lamp
S Spot (10°)
N Narrow Flood (27°)
F Flood (40°)
Note: See ordering
examples above for 1, 2
and 3-lamp units.
DCBT2
BT5 MH Lamp
PGJ5 base
† Consult Factory for Availability
Finish
20H-NT
(T4 Mini, T4/T4.5)
20W 120/277V Electronic
20H1-NT
(BT5 only)
20W 120V Electronic
39H-NT
(T4/T4.5 only)
39W 120/277V Electronic
70H-NT
(T4/T4.5 only)
70W 120/277V Electronic
Example: HB-TL
Options
Accessories
WH White
BL Black
GE SuperMini T4
Philips Mini MasterColor® CDM-Tm
1
2
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
SRSemi-recessed
HB-TL
HB-52
HB-28
LB-27
Two 25” Tru-Lock grid ceiling bar hangers, Pair
Two 52” C-Channel Bar Hangers, Pair
Two 28” C-Channel Bar Hangers, Pair
Two 27” Linear Bar Hangers, Pair
T569BL
T561
T562
T563
T564
T565
T566
T5677
T5678
T5619
T5622
Louver-3 3/4” Dia. with 1/2 Sq. Cells
Pink Color Filter
Red Color Filter
Light Blue Color Filter
Medium Blue Color Filter
Amber Blue Color Filter
Green Color Filter
Prismatic Spread Lens
Linear Spread Lens
Color Correction Lens/UV Filter
UV Filter
15
m u l ti - s p ot ® T 4 cmh
multi-lamp recessed adjustables, electronic ballast
11"
6 3/4"
23 5/8"
14 5/8"
6 3/4"
9 1/2"
8 1/2"
Ceiling
Cutout
8 1/2"
Ceiling
Cutout
13 5/8" Dia.
Ceiling Cutout
product specifications
8 1/2"
9 1/2"
22 5/8" Dia.
Ceiling Cutout
photometric data
Lamp: Two or three T4 metal halide lamps.
Lamp Holder: T4/4.5 – G8.5 bi-pin socket base with
recessed female contacts • 1A, 750V, rated for 5KV
pulse • T4 Mini – Twist and lock GU6.5 base; 2A,
250V rated for 5KV pulse • BT5 – Twist and lock PGJ5
base; 2A, 250V rated for 2.5KV pulse.
Lamp Housing Integral accessory holder and metal
snoot for improved lamp shielding • Can be combined
with accessory louver and/or accessory color filters.
Aiming 34˚ vertical aiming capability (up to 45˚ if
snoot is not used) and 360˚ horizontal rotation • Each
lampholder is individually aimable.
Trim Finish All black with white flange (BL) or all white
with white lamp cartridge and white flange (WH).
Electronic Ballast May be replaced from above or
below ceiling • T4/4.5 and T4 Mini – Universal
120/277 volt electronic solid state, high power
factor and reliable starting to -30°C • BT5 – 120 volt
electronic solid state, high power factor and reliable
starting to -20°C.
Housing 22 gauge die-formed galvanized steel,
vented • Electrical connections can be made from below
the ceiling in an internal wireway or from above the
ceiling through a wireway access cover
Trim Attaches to housing using torsion springs • Lamps
are replaced by removing lampholder insert/snoot
assembly for easy front relamping.
Lamp Guard Clear tempered glass.
Accessories Up to three accessories may be used
simultaneously in each lampholder including the optional
snoot. (Shipped with fixture.)
Labels U.L. listed for through-branch wiring, damp
locations, and IP • Product thermally protected against
improper use of lamps or insulation • Union made AFLCIO • CSA certified.
Product specifications subject to change without notice.
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
D
MH
The beam spread in degrees and the
beam “L” and “W” in the above tables
are computed at 50% of centerbeam
candlepower and represent areas of
“effective illumination.”
W
Beam Beam Type Spread°
0
Aim Point
MH FC
W
30°
30°
L
W
FC
L
W
S
70W T4
10°
Ceramic
Metal Halide
10,00050218
4 –‑ –‑
61395 1.0
8785 1.3
10502 1.7
12349 2.0
14256 2.4
–‑
–‑ –‑
1.0 907 1.4
1.3 5101.8
1.7 3262.3
2.0 2272.7
2.4 1673.1
–‑
1.2
1.6
1.9
2.3
2.7
N
27°
10,00014459
4 –‑ –‑
6402 2.9
8226 3.8
10145 4.8
12100 5.8
–‑
–‑ –‑
2.9 2613.9
3.8 1475.2
4.8 946.5
5.8 657.8
3.3
4.4
5.5
6.7
F
40°
10,0008651
4 –‑ –‑
6240 4.3
8135 5.8
10 87 7.2
12 60 8.7
–‑
–‑ –‑ –‑
4.3 1566.1 5.0
5.8 888.1 6.7
7.2 5610.1 8.4
8.7 3912.1 10.0
–‑
D FC
MST4
T4/T4.5 MH
Lamp
G8.5 base
MSTM1
T4 Mini MH
Lamp
GU6.5 base
MSBT2
BT5 MH Lamp
PGJ5 base
16
Wattage/Lamp
S Spot (10°)
N Narrow Flood (27°)
F Flood (40°)
Note: Only use two beam
spread designations
for 2-lamp units. (see
examples above)
20H1
(BT5 only)
20W 120V Electronic
39H
(T4/T4.5 only)
39W 120/277V Electronic
70H
(T4/T4.5 only)
70W 120/277V Electronic
2.8
4.1
5.5
6.9
**
**
4113 6.9 9.3
6 5010.413.9
8 2813.718.6
1018 17.323.2
**** ** **
1.3
2.0
2.7
3.4
**
**
FC X
1111 4
494 6
278 8
178 10
** **
** **
L
W
1.4
2.0
2.7
3.4
**
**
1.0
1.4
1.9
2.4
**
**
3.8 320 4 4.0 2.7
5.8 142 6 6.1 4.1
7.7 80 8 8.2 5.4
9.6 51 10 10.2 6.8
** ** ** ** **
4 68 6.919.1 5.7 191 4 6.7 4.1
6 3010.428.6 8.7 85 6 10.0 6.1
8 17 13.938.211.6 48 8 13.3 8.2
1011 17.347.814.5 31 10 16.710.2
**** ** ** ** ** ** ** **
Lamp Multipliers:20W - .55
39W - .28
Finish
20H
(T4 Mini, T4/T4.5) 20W
120V/277V Electronic
L W
Photometric chart represents single lamp data at specified angle.
Examples: 2-Lamp Unit: MSBT-SS-20H1-BL; 3-Lamp Unit: MSBT-FSF-20H1-BL
Rough-In
45°
X
4392 6.9
6174 10.4
8 9813.9
1063 17.3
**** **
**** **
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Beam Spread/
One per Lamp
1
2
3
L
Aim Point
Aiming Angle (A = 30)
0°
CBCP
0
L
Aiming Angle (A = 0)
Rated
Life
A
W
Aim Point
L
**Due to steep aiming angle, length of
beam extends beyond 25’.
Lamp
X
A
Example: HB-TL
Options
Accessories
WH White
BL Black
GE SuperMini T4
Philips Mini MasterColor® CDM-Tm
1
2
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HB-TL
HB-52
HB-28
LB-27
Two 5” Tru-Lock grid ceiling bar hangers, Pair
Two 52” C-Channel Bar Hangers, Pair
Two 28” C-Channel Bar Hangers, Pair
Two 27” Linear Bar Hangers, Pair
T569BL
T561
T562
T563
T564
T565
T566
T5677
T5678
T5619
T5622
Louver-3 3/4” Dia. with 1/2 Sq. Cells
Pink Color Filter
Red Color Filter
Light Blue Color Filter
Medium Blue Color Filter
Amber Blue Color Filter
Green Color Filter
Prismatic Spread Lens
Linear Spread Lens
Color Correction Lens/UV Filter
UV Filter
† Consult Factory for Availability
MULTI-LAMP
D E S I G N E R C O V E ™ T 6 cmh
OPEN APERTURE WITH WHITE TRIM FLANGE, Electronic ballast
9 1/8"
“A”
See chart for ceiling
Cutout dimensions
9"
# of Lamps
3
2
1
Ceiling Cutout
23 3/4” x 8 5/8”
16” x 8 5/8”
8 1/4” x 8 5/8”
A
22 3/4”
15 1/8”
7 1/2”
B
31 1/2”
23 3/4”
16”
“B”
product specifications
photometric data
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
D
MH
The beam spread in degrees and the
beam “L” and “W” in the above tables
are computed at 50% of centerbeam
candlepower and represent areas of
“effective illumination.”
Lamp Holder: G12 socket base with
heavy duty recessed female contacts •
660W, 600V rated for 5KV pulse
W
Housing: Heavy gauge cold rolled steel
with white or black finish • Universal
housing design installs in suspended grid,
plaster or drywall
Lamp
Lamp Guard: Clear tempered glass
Beam Beam Type Spread°
0
Aim Point
MH FC
W
30°
30°
L
W
FC
L
W
70W T6
S
8°
Ceramic
Metal Halide
15,00053513
4 –‑ –‑
61486 0.9
8836 1.2
10535 1.5
12372 1.8
N
25°
15,00016223
4 –‑ –‑
6451 2.6
8253 3.5
10162 4.4
12113 5.2
–‑
–‑ –‑
2.6 2933.6
3.5 1654.7
4.4 1055.9
5.2 737.1
F
42°
15,0007106
4 –‑ –‑
6197 4.6
8111 6.1
10 71 7.6
12 49 9.1
–‑
–‑ –‑ –‑
4.6 1286.4 5.3
6.1 728.5 7.0
7.6 4610.7 8.8
9.1 3212.8 10.6
Accessories: Up to three accessories may
be used simultaneously in each lampholder
including the optional snoot
Labels and Listings
UL/C-UL listed for damp locations • I.B.E.W.
Union made
Product specifications subject to change
without notice.
L
Aim Point
Aiming Angle (A = 30)
0°
CBCP
0
L
Aiming Angle (A = 0)
Rated
Life
A
W
Aim Point
L
**Due to steep aiming angle, length of
beam extends beyond 25’.
Adjustability: Yoke assembly allows 355˚
rotation and up to 45˚ tilt of lamp
X
A
D FC
X
45°
L W
–‑
–‑ –‑
0.9 966 1.2
1.2 5431.6
1.5 3482.0
1.8 2422.6
–‑
1.0
1.4
1.7
2.0
4418 6.9
6186 10.4
8105 13.9
1067 17.3
**** **
–‑
3.0
4.0
5.0
6.0
4127 6.9 8.1
6 5610.412.2
8 3513.916.3
1020 17.320.3
**** ** **
2.4
3.6
4.8
6.0
**
1.2
1.8
2.4
3.0
**
FC X
L
W
1184 4
526 6
296 8
189 10
** **
1.2
1.8
2.4
3.0
**
0.8
1.3
1.7
2.1
**
3.5 359 4 3.7 2.5
5.2 160 6 5.5 3.7
7.0 90 8 7.3 4.9
8.7 57 10 9.2 6.2
** ** ** ** **
4 56 6.921.6 6.1 157 4 7.1 4.3
6 2510.432.4 9.1 70 6 10.7 6.5
8 14 13.943.212.2 39 8 14.3 8.6
10 9 17.353.915.2 25 10 17.810.8
**** ** ** ** ** ** ** **
Photometric chart represents single lamp data at specified angle.
Lamp Multipliers:39W -0.55
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Examples: 1-Lamp Unit: DCT6-N-70H-WH; 2-Lamp Unit: DCT6-SS-70H-WH; 3-Lamp Unit: DCT6-FSF-70H-WH
Beam Spread/
One per Lamp
1
2
3
Rough-In
DCT6
T6 MH Lamp
G12 base
Wattage/Lamp
S Spot (8°)
N Narrow Flood (25°)
F Flood (42°)
Note: See ordering
examples above for 1, 2
and 3-lamp
† Consult Factory for Availability
Finish
70H
70W T6 MH
120/277V Electronic
Options
Accessories
-
39H
39W T6 MH
120/277V Electronic
Example: HB-TL
WH White
BL Black
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
SRSemi-recessed
HB-TL
HB-52
HB-28
LB-27
Two 5” Tru-Lock grid ceiling bar hangers, Pair
Two 52” C-Channel Bar Hangers, Pair
Two 28” C-Channel Bar Hangers, Pair
Two 27” Linear Bar Hangers, Pair
T569BL
T561
T562
T563
T564
T565
T566
T5677
T5678
T5619
T5622
Louver-3 3/4” Dia. with 1/2 Sq. Cells
Pink Color Filter
Red Color Filter
Light Blue Color Filter
Medium Blue Color Filter
Amber Blue Color Filter
Green Color Filter
Prismatic Spread Lens
Linear Spread Lens
Color Correction Lens/UV Filter
UV Filter
17
D E S I G N E R C O V E ™ ( trim l ess ) t 6 cmh
OPEN APERTURE, trimless, Electronic ballast
8 11/16”
See chart for ceiling
Cutout dimensions
A
# of Lamps
3
2
1
Ceiling Cutout
26” x 9”
17 1/2” x 9”
8 7/8” x 9”
A
10 3/8”
10 3/8”
10 3/8”
B
28”
19 1/4”
8 3/8”
B
product specifications
photometric data
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
D
MH
The beam spread in degrees and the
beam “L” and “W” in the above tables
are computed at 50% of centerbeam
candlepower and represent areas of
“effective illumination.”
Lamp Holder: G12 socket base with heavy
duty recessed female contacts • 660W, 600V
rated for 5KV pulse
W
Housing: Heavy gauge cold rolled steel
with white or black finish • Universal housing
design installs in suspended grid, plaster or
drywall
Lamp
Lamp Guard: Clear tempered glass
Beam Beam Type Spread°
0
Aim Point
MH FC
W
30°
30°
L
W
FC
L
W
70W T6
S
8°
Ceramic
Metal Halide
15,00053513
4 –‑ –‑
61486 0.9
8836 1.2
10535 1.5
12372 1.8
N
25°
15,00016223
4 –‑ –‑
6451 2.6
8253 3.5
10162 4.4
12113 5.2
–‑
–‑ –‑
2.6 2933.6
3.5 1654.7
4.4 1055.9
5.2 737.1
F
42°
15,0007106
4 –‑ –‑
6197 4.6
8111 6.1
10 71 7.6
12 49 9.1
–‑
–‑ –‑ –‑
4.6 1286.4 5.3
6.1 728.5 7.0
7.6 4610.7 8.8
9.1 3212.8 10.6
Accessories: Up to three accessories may
be used simultaneously in each lampholder
including the optional snoot
Labels and Listings
UL/C-UL listed for damp locations • I.B.E.W. Union
made
Product specifications subject to change without
notice.
L
Aim Point
Aiming Angle (A = 30)
0°
CBCP
0
L
Aiming Angle (A = 0)
Rated
Life
A
W
Aim Point
L
**Due to steep aiming angle, length of
beam extends beyond 25’.
Adjustability: Yoke assembly allows 355˚
rotation and up to 45˚ tilt of lamp
X
A
D FC
X
45°
L W
–‑
–‑ –‑
0.9 966 1.2
1.2 5431.6
1.5 3482.0
1.8 2422.6
–‑
1.0
1.4
1.7
2.0
4418 6.9
6186 10.4
8105 13.9
1067 17.3
**** **
–‑
3.0
4.0
5.0
6.0
4127 6.9 8.1
6 5610.412.2
8 3513.916.3
1020 17.320.3
**** ** **
2.4
3.6
4.8
6.0
**
1.2
1.8
2.4
3.0
**
FC X
L
W
1184 4
526 6
296 8
189 10
** **
1.2
1.8
2.4
3.0
**
0.8
1.3
1.7
2.1
**
3.5 359 4 3.7 2.5
5.2 160 6 5.5 3.7
7.0 90 8 7.3 4.9
8.7 57 10 9.2 6.2
** ** ** ** **
4 56 6.921.6 6.1 157 4 7.1 4.3
6 2510.432.4 9.1 70 6 10.7 6.5
8 14 13.943.212.2 39 8 14.3 8.6
10 9 17.353.915.2 25 10 17.810.8
**** ** ** ** ** ** ** **
Photometric chart represents single lamp data at specified angle.
Lamp Multiplier: 39W - 0.55
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Examples: 1-Lamp Unit: DCT6-N-39H-NT-BL; 2-Lamp Unit: DCT6-SS-39H-NT-BL; 3-Lamp Unit: DCT6-FSF-39H-NT-BL
Beam Spread/
One per Lamp
1
2
3
Rough-In
DCT6
T6 MH Lamp
G12 base
18
Wattage/Lamp
S Spot (8°)
N Narrow Flood (25°)
F Flood (42°)
Note: See ordering
examples above for 1, 2
and 3-lamp
Finish
39H-NT
39W T6 MH
120/277V Electronic
70H-NT
70W T6 MH
120/277V Electronic
Example: HB-TL
Options
Accessories
WH White
BL Black
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
SRSemi-recessed
HB-TL
HB-52
HB-28
LB-27
Two 5” Tru-Lock grid ceiling bar hangers, Pair
Two 52” C-Channel Bar Hangers, Pair
Two 28” C-Channel Bar Hangers, Pair
Two 27” Linear Bar Hangers, Pair
T569BL
T561
T562
T563
T564
T565
T566
T5677
T5678
T5619
T5622
Louver-3 3/4” Dia. with 1/2 Sq. Cells
Pink Color Filter
Red Color Filter
Light Blue Color Filter
Medium Blue Color Filter
Amber Blue Color Filter
Green Color Filter
Prismatic Spread Lens
Linear Spread Lens
Color Correction Lens/UV Filter
UV Filter
† Consult Factory for Availability
MULTI-LAMP
m u l ti - s p ot ® T 6 cmh
MULTI-LAMP RECESSED ADJUSTABLES, electronic ballast
11"
6 3/4”
23 5/8”
14 5/8”
6 3/4"
9 1/2”
8 1/2"
Ceiling
Cutout
8 1/2"
Ceiling
Cutout
photometric data
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
Lamp Two or three T6 metal halide lamps.
Lamp Holder: G12 socket base with recessed
female contacts • 660W, 600V, rated for 5KV pulse
Lamp Housing Integral accessory holder and
metal snoot for improved lamp shielding • Can be
combined with accessory louver and/or accessory
color filters.
Aiming 34˚ vertical aiming capability (up to 45˚ if
snoot is not used) and 360˚ horizontal rotation • Each
lampholder is individually aimable.
Trim Finish All black with white flange (BL) or all
white with white lamp cartridge and white flange
(WH).
Electronic Ballast May be replaced from above or
below ceiling • 120/277VAC input voltage.
Housing 22 gauge die-formed galvanized steel,
vented • Electrical connections can be made from
below the ceiling in an internal wireway or from
above the ceiling through a wireway access cover
Trim Attaches to housing using torsion springs
• Lamps are replaced by removing lampholder insert/
snoot assembly but without removing trim section.
Lamp Guard Clear tempered glass.
Accessories Up to three accessories may be used
simultaneously in each lampholder including the
optional snoot.
Labels U.L. listed for through-branch wiring, damp
locations, and IP • Product thermally protected against
improper use of lamps or insulation • Union made AFLCIO • CSA certified.
Product specifications subject to change without notice.
D
MH
The beam spread in degrees and the
beam “L” and “W” in the above tables
are computed at 50% of centerbeam
candlepower and represent areas of
“effective illumination.”
W
Beam Beam Type Spread°
0
Aim Point
MH FC
W
30°
30°
L
W
FC
L
W
70W T6
S
8°
Ceramic
Metal Halide
15,00053513
4 –‑ –‑
61486 0.9
8836 1.2
10535 1.5
12372 1.8
N
25°
15,00016223
4 –‑ –‑
6451 2.6
8253 3.5
10162 4.4
12113 5.2
–‑
–‑ –‑
2.6 2933.6
3.5 1654.7
4.4 1055.9
5.2 737.1
F
42°
15,0007106
4 –‑ –‑
6197 4.6
8111 6.1
10 71 7.6
12 49 9.1
–‑
–‑ –‑ –‑
4.6 1286.4 5.3
6.1 728.5 7.0
7.6 4610.7 8.8
9.1 3212.8 10.6
D FC
MST6
MST6
T6 MH Lamp
G12 base
-
Wattage/Lamp
S Spot (8°)
N Narrow Flood (25°)
F Flood (42°)
Note: Only use two beam
spread designations
for 2-lamp units. (see
example above)
† Consult Factory for Availability
70H
70W T6 MH
120/277V Electronic
45°
L W
–‑
–‑ –‑
0.9 966 1.2
1.2 5431.6
1.5 3482.0
1.8 2422.6
–‑
1.0
1.4
1.7
2.0
4418 6.9
6186 10.4
8105 13.9
1067 17.3
**** **
–‑
3.0
4.0
5.0
6.0
4127 6.9 8.1
6 5610.412.2
8 3513.916.3
1020 17.320.3
**** ** **
2.4
3.6
4.8
6.0
**
1.2
1.8
2.4
3.0
**
FC X
L
W
1184 4
526 6
296 8
189 10
** **
1.2
1.8
2.4
3.0
**
0.8
1.3
1.7
2.1
**
3.5 359 4 3.7 2.5
5.2 160 6 5.5 3.7
7.0 90 8 7.3 4.9
8.7 57 10 9.2 6.2
** ** ** ** **
4 56 6.921.6 6.1 157 4 7.1 4.3
6 2510.432.4 9.1 70 6 10.7 6.5
8 14 13.943.212.2 39 8 14.3 8.6
10 9 17.353.915.2 25 10 17.810.8
**** ** ** ** ** ** ** **
Lamp Multipliers:39W - 0.55
Example: HB-TL
Finish
39H
39W T6 MH
120/277V Electronic
X
Photometric chart represents single lamp data at specified angle.
Examples: 2-Lamp Unit: MST6-SS-70H-BL; 3-Lamp Unit: MST6-FSF-70H-BL
Rough-In
L
Aim Point
Aiming Angle (A = 30)
0°
CBCP
0
L
Aiming Angle (A = 0)
Rated
Life
A
W
Aim Point
L
**Due to steep aiming angle, length of
beam extends beyond 25’.
Lamp
X
A
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Beam Spread/
One per Lamp
1
2
3
9 1/2"
22 5/8” Dia.
Ceiling Cutout
13 5/8” Dia.
Ceiling Cutout
product specifications
8 1/2"
Options
Accessories
WH White
BL Black
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HB-TL
HB-52
HB-28
LB-27
Two 5” Tru-Lock grid ceiling bar hangers, Pair
Two 52” C-Channel Bar Hangers, Pair
Two 28” C-Channel Bar Hangers, Pair
Two 27” Linear Bar Hangers, Pair
T569BL
T561
T562
T563
T564
T565
T566
T5677
T5678
T5619
T5622
Louver-3 3/4” Dia. with 1/2 Sq. Cells
Pink Color Filter
Red Color Filter
Light Blue Color Filter
Medium Blue Color Filter
Amber Blue Color Filter
Green Color Filter
Prismatic Spread Lens
Linear Spread Lens
Color Correction Lens/UV Filter
UV Filter
19
DESIGNER COVE™ MR16 CMH
OPEN APERTURE WITH WHITE TRIM FLANGE, electronic ballast
“B”
6 1/8”
“A”
See chart for ceiling
Cutout dimensions
# of Lamps
3
2
1
Ceiling Cutout
13 1/8” x 5”
9 1/4” x 5”
5 1/2” x 5”
A
12 1/8”
8 3/8”
4 1/8”
10 1/2”
B
26”
20 3/4”
13”
product specifications
photometric data
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Lamp Holder: GX10 twist and lock base;
2A, 250V rated for 5KV pulse
Adjustability: Yoke assembly allows 360˚
rotation and up to 35˚ tilt of lamp
Housing: Heavy gauge cold rolled steel
with white or black finish • Universal
housing design installs in suspended grid,
plaster or drywall
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
D
MH
The beam spread in degrees and the
beam “L” and “W” in the above tables
are computed at 50% of centerbeam
candlepower and represent areas of
“effective illumination.”
W
Beam Beam Type Spread°
Rated
Life
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
MH FC
W
FC
L
4563 0.8 0.8 3661.1
6250 1.3 1.3 1631.7
8141 1.7 1.7 912.3
10 90 2.1 2.1 592.8
12 63 2.5 2.5 413.4
20W MR16 FL
25°
CMH Flood
9000 2900
20W MR16 WFL
40°
CMH Wide Flood
9000
4181 1.8 1.8 1182.4 2.0
6 81 2.7 2.7 523.6 3.1
8 45 3.5 3.5 294.8 4.1
10 29 4.4 4.4 196.0 5.1
12 20 5.3 5.3 137.8 6.1
4 94 2.9 2.9 61 4.1 3.4
6 42 4.4 4.4 276.1 5.0
8 23 5.8 5.8 158.1 6.7
10 15 7.3 7.3 1010.2 8.4
12 10 8.7 8.7
712.2 10.1
Photometric chart represents single lamp data at specified angle.
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: HB-TL
Example: DC161-20H-WH
Wattage/Lamp
-
20H
20H
DC161
1-Lamp unit 20W MR16 CMH
120V/277V Electronic
DC162
2-Lamp unit
DC163
3-Lamp unit
20
Finish
-
Options
Accessories
WH White
BL Black
W
9000 9000
Product specifications subject to change
without notice.
Rough-In
30°
30°
L
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
L
Aim Point
W
20W MR16 SP
12°
CMH Spot
1500
0
Aiming Angle (A = 30)
0°
CBCP
A
W
Aim Point
L
Aiming Angle (A = 0)
Lamp Guard: Clear tempered glass
Accessories: Up to three accessories may
be used simultaneously in each lampholder
including the optional snoot
0
Aim Point
L
**Due to steep aiming angle, length of
beam extends beyond 25’.
Lamp
X
A
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
HB-16 Hexcell Louver
PCF16 Pink Color Filter
RCF16 Red Color Filter
LBCF16 Light Blue Color Filter
MBCF16Medium Blue Color Filter
ACF16 Amber Blue Color Filter
GCF16 Green Color Filter
† Consult Factory for Availability
1.0
1.5
1.9
2.4
2.9
D FC
X
45°
L W
FC
2281 3.5 1.7 0.8 797
470 6.93.51.7199
6 3110.4 5.2 2.5 89
8 1813.9 7.0 3.4 50
1011 17.3 8.7 4.2 32
X
L
W
2 0.9 0.6
4 1.71.2
6 2.6 1.8
8 3.4 2.4
10 4.3 3.0
291 3.54.21.8257 2 1.91.3
423 6.98.33.5 64 4 3.72.5
6 1010.412.5 5.3 29 6 5.6 3.8
86
13.9
16.67.116 87.55.0
10 417.320.8 8.9 10 10 9.3 6.3
247 3.59.72.9133 2 3.42.1
4 12 6.919.3 5.8 33 4 6.7 4.1
65
10.4
29.08.715 6
10.16.2
8 3 13.938.711.6 8 8 13.4 8.2
10 2 17.348.314.6 5 10 16.810.3
MULTI-LAMP
D E S I G N E R C O V E ™ ( trim l ess ) mr 1 6 cmh
OPEN APERTURE trimless, electronic ballast
# of Lamps
3
2
1
Lamp Type
MR16
MR16
MR16
Ceiling Cutout
13” x 5”
8 7/8” x 5”
4 5/8” x 5”
Remote Ballast
A
15”
10 7/8”
6 5/8”
product specifications
photometric data
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
Ballast: Remote ballast, electronic,
120/277 volt, HPF (one per lamp), mounts
with bar hangers
D
MH
Lamp Holder: GX10 twist and lock base
• 2A, 250V rated for 5KV pulse
Adjustability: Gimbal ring lamp assembly
allows 360° horizontal and 35° vertical
adjustment on all units • Black baked enamel
finish
The beam spread in degrees and the
beam “L” and “W” in the above tables
are computed at 50% of centerbeam
candlepower and represent areas of
“effective illumination.”
W
Beam Beam Type Spread°
Lamp
Lamp Guard: Clear tempered glass
Accessories: Up to three accessories may
be used simultaneously in each lampholder
including the optional snoot
Rated
Life
0
MH FC
W
30°
30°
L
L
Aim Point
Aiming Angle (A = 30)
0°
CBCP
A
W
Aim Point
L
Aiming Angle (A = 0)
W
FC
L
W
D FC
X
45°
L W
FC
X
L
W
20W MR16 SP
12°
CMH Spot
9000 9000
4563 0.8 0.8 3661.1
6250 1.3 1.3 1631.7
8141 1.7 1.7 912.3
10 90 2.1 2.1 592.8
12 63 2.5 2.5 413.4
1.0
1.5
1.9
2.4
2.9
2281 3.5 1.7 0.8 797
470 6.93.51.7199
6 3110.4 5.2 2.5 89
8 1813.9 7.0 3.4 50
1011 17.3 8.7 4.2 32
20W MR16 FL
25°
CMH Flood
9000 2900
4181 1.8 1.8 1182.4
6 81 2.7 2.7 523.6
8 45 3.5 3.5 294.8
10 29 4.4 4.4 196.0
12 20 5.3 5.3 137.8
2.0
3.1
4.1
5.1
6.1
291 3.54.21.8257 2 1.91.3
423 6.98.33.5 64 4 3.72.5
6 1010.412.5 5.3 29 6 5.6 3.8
86
13.9
16.67.116 87.55.0
10 417.320.8 8.9 10 10 9.3 6.3
20W MR16 WFL
40°
CMH Wide Flood
9000
4
6
8
10
12
61 4.1 3.4
276.1 5.0
158.1 6.7
1010.2 8.4
712.2 10.1
247 3.59.72.9133 2 3.42.1
4 12 6.919.3 5.8 33 4 6.7 4.1
65
10.4
29.08.715 6
10.16.2
8 3 13.938.711.6 8 8 13.4 8.2
10 2 17.348.314.6 5 10 16.810.3
Labels and Listings
UL/C-UL listed for damp locations • I.B.E.W.
Union made
Product specifications subject to change
without notice.
0
Aim Point
L
**Due to steep aiming angle, length of
beam extends beyond 25’.
Housing: Heavy gauge cold rolled steel
with white or black finish
X
A
1500
94 2.9 2.9
42 4.4 4.4
23 5.8 5.8
15 7.3 7.3
10 8.7 8.7
2 0.9 0.6
4 1.71.2
6 2.6 1.8
8 3.4 2.4
10 4.3 3.0
Photometric chart represents single lamp data at specified angle.
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: DC162-20H-NT-WH
20H-NT
DC161
1-Lamp unit, Trimless
DC162
2-Lamp unit, Trimless
Example: LBCF16
Wattage/Lamp
Rough-In
20H-NT
20W MR16 CMH
120/277V Electronic
DC163
3-Lamp unit, Trimless
† Consult Factory for Availability
Finish
-
Options
Accessories
WH White
BL Black
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HCL16 Hexcell Louver
PCF16 Pink Color Filter
RCF16 Red Color Filter
LBCF16 Light Blue Color Filter
MBCF16Medium Blue Color Filter
ACF16 Amber Blue Color Filter
GCF16 Green Color Filter
21
m u l ti - s p ot ® M R 1 6 cmh
11"
MULTI-LAMP RECESSED ADJUSTABLES, electronic ballast
6 3/4"
8 1/2"
9 1/2"
11"
6 3/4"
14 5/8"
6 3/4"
23 5/8"
8 1/2"
Ceiling
Cutout
9 1/2"
8 1/2"
Ceiling
Cutout
8 1/2"
9 1/2"
22 5/8"
Ceiling Cutout
13 5/8"
Ceiling Cutout
6 3/4"
product specifications
photometric data
Lamp Two or three 20W CMH MR16 metal halide
lamps.
Socket GX10 twist and lock base, 2A 250V rated
for 5KV pulse.
Lamp Housing Integral accessory holder and
integral metal snoot for improved lamp shielding
• Can be combined with accessory louver and/or
accessory color filters.
Aiming 45˚ vertical aiming capability and 360˚
horizontal rotation • Each lampholder is individually
aimable.
Trim Finish All black with white flange (BL) or all
white with white lamp cartridge and white flange
(WH).
Electronic Ballast May be replaced from above or
below ceiling • 120/277VAC input voltage.
Housing 22 gauge die-formed galvanized steel,
vented • Electrical connections can be made from
below the ceiling in an internal wireway or from
above the ceiling through a wireway access cover
Trim Attaches to housing using torsion springs
• Lamps are replaced by removing lampholder insert/
snoot assembly but without removing trim section.
Lamp Guard Clear tempered glass.
Accessories Up to three accessories may be used
simultaneously in each lampholder including the
snoot.
Labels U.L. listed for through-branch wiring, damp
locations, and IP • Product thermally protected
against improper use of lamps or insulation • Union
made AFL-CIO • CSA certified.
Product specifications subject to change without
notice.
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
14 5/8"
MH
The beam spread in degrees and the
beam “L” and “W” in the above tables
are computed at 50% of centerbeam
candlepower and represent areas of
“effective illumination.”
W
Beam Beam Type Spread°
0
Aim Point
L
Aiming Angle (A = 0)
Rated
Life
W
Aim Point
L
**Due to steep aiming angle, length of
beam extends beyond 25’.
Lamp
X
A
13 5/8"
Ceiling
Cutout
0°
30°
CBCP
MH FC
L
-
20H
20H
MS162
2-Lamp unit 20W MR16 CMH
120V/277V Electronic
MS163
3-Lamp unit
22
WH White
BL Black
W
W
FC
L
W
D FC
X
22 5/8"
Ceiling Cutout
45°
L W
FC
X
L
W
9000 9000
4563 0.8 0.8 3661.1
6250 1.3 1.3 1631.7
8141 1.7 1.7 912.3
10 90 2.1 2.1 592.8
12 63 2.5 2.5 413.4
1.0
1.5
1.9
2.4
2.9
2281 3.5 1.7 0.8 797
470 6.93.51.7199
6 3110.4 5.2 2.5 89
8 1813.9 7.0 3.4 50
1011 17.3 8.7 4.2 32
20W MR16 FL
25°
CMH Flood
9000 2900
4181 1.8 1.8 1182.4
6 81 2.7 2.7 523.6
8 45 3.5 3.5 294.8
10 29 4.4 4.4 196.0
12 20 5.3 5.3 137.8
2.0
3.1
4.1
5.1
6.1
291 3.54.21.8257 2 1.91.3
423 6.98.33.5 64 4 3.72.5
6 1010.412.5 5.3 29 6 5.6 3.8
86
13.9
16.67.116 87.55.0
10 417.320.8 8.9 10 10 9.3 6.3
20W MR16 WFL
40°
CMH Wide Flood
9000
4
6
8
10
12
61 4.1 3.4
276.1 5.0
158.1 6.7
1010.2 8.4
712.2 10.1
247 3.59.72.9133 2 3.42.1
4 12 6.919.3 5.8 33 4 6.7 4.1
65
10.4
29.08.715 6
10.16.2
8 3 13.938.711.6 8 8 13.4 8.2
10 2 17.348.314.6 5 10 16.810.3
1500
94 2.9 2.9
42 4.4 4.4
23 5.8 5.8
15 7.3 7.3
10 8.7 8.7
Photometric chart represents single lamp data at specified angle.
Options
Accessories
-
-
L
Aim Point
30°
Example: HB-TL
Finish
A
0
20W MR16 SP
12°
CMH Spot
Example: MS163-20H-BL
Wattage/Lamp
8 1/2"
Ceiling
Cutout
Aiming Angle (A = 30)
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Rough-In
23 5/8"
D
†347347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HB-TL Two 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 Two 52” C-Channel Bar Hangers, Pair
HB-28 Two 28” C-Channel Bar Hangers, Pair
LB-27 Two 27” Linear Bar Hangers, Pair
T551 Med. Pink Color Filter
T553 Med. Blue Color Filter
T555 Med. Amber Color Filter
T5501 Red Dichoric Lens
T5503 Med. Green Dichoric Lens
T5504 Med. Blue Dichoric Lens
T5505 Yellow Dichoric Lens
T5506 Magenta Dichoric Lens
T5511 Blue Green Dichoric Lens
T5516 Daylight Blue Correction Lens
T5518 Cosmetic Peach Correction Lens
T557 Prismatic Lens
T559 Linear Spread Lens
T5520 Diffuse Spread Lens
T5521 Uniformity Lens
T5522 UV Filter Lens
T5559BL
Hexcell Louver
† Consult Factory for Availability
2 0.9 0.6
4 1.71.2
6 2.6 1.8
8 3.4 2.4
10 4.3 3.0
avio recessed mounted, electronic ballast
4 1/2"
XR16301 Recessed
XR16101
13 1/8"
7 1/8"
1-Lamp
8"
XR16201
7 3/4"
7 3/16"
2-Lamp
6 1/4"
14 3/4"
MULTI-LAMP
a vio ™ M R 1 6 C M H
8"
Airfoil Trim
XR16301
7 1/8"
3-Lamp
11"
6 1/4"
14 3/4"
XS16301 Surface Mount
16 1/8"
10 1/2"
4 7/8" Ceiling Cutout
(see M4-MR16-20E)
8"
16 1/8"
XR16401
7 1/8"
(for more information, go to
www.junolightinggroup.com)
4-Lamp Linear
6 1/4"
19"
8"
20 3/8"
4-Lamp Quad
XR16404
7 1/8"
11"
12 3/4"
10 1/2"
product specifications
12"
photometric data
Lamp Two or three 20W CMH MR16 metal halide
lamps.
Lens Glass lens included with each lampholder •
Can accept up to two accessories simultaneously - see
Accessory Chart below and consult factory for details.
Socket GX10 twist and lock base, 2A 250V rated for
5KV pulse.
Aiming 45˚ vertical aiming capability and 360˚
horizontal rotation • Each lampholder is individually
aimable.
Electronic Ballast May be replaced from above or
below ceiling • 120/277VAC input voltage.
Lampholder Assembly Construction Precision,
one-piece die-cast aluminum grid frame offers premium,
consistent aesthetics • Durable die-cast aluminum
concentric gimbal rings provides optimum adjustability
• Attaches to housing using torsion springs.
Housing Construction Supplied with multi-lamp
units only • 22 gauge die-formed galvanized steel
• Electrical connections can be made from below the
ceiling in an internal wireway or from above the ceiling
through a wireway access cover
Labels U.L. listed for through-branch wiring, damp
locations, and IP • Product thermally protected against
improper use of lamps or insulation • Union made AFLCIO • CSA certified.
Product specifications subject to change without notice.
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
D
MH
The beam spread in degrees and the
beam “L” and “W” in the above tables
are computed at 50% of centerbeam
candlepower and represent areas of
“effective illumination.”
W
Lamp
0
Aim Point
MH FC
W
30°
30°
L
L
Aim Point
Aiming Angle (A = 30)
0°
CBCP
0
L
Aiming Angle (A = 0)
Rated
Life
A
W
Aim Point
L
**Due to steep aiming angle, length of
beam extends beyond 25’.
Beam Beam Type Spread°
X
A
W
FC
L
W
D FC
X
45°
L W
FC
X
L
W
20W MR16 SP
12°
CMH Spot
9000 9000
4563 0.8 0.8 3661.1
6250 1.3 1.3 1631.7
8141 1.7 1.7 912.3
10 90 2.1 2.1 592.8
12 63 2.5 2.5 413.4
1.0
1.5
1.9
2.4
2.9
2281 3.5 1.7 0.8 797
470 6.93.51.7199
6 3110.4 5.2 2.5 89
8 1813.9 7.0 3.4 50
1011 17.3 8.7 4.2 32
20W MR16 FL
25°
CMH Flood
9000 2900
4181 1.8 1.8 1182.4
6 81 2.7 2.7 523.6
8 45 3.5 3.5 294.8
10 29 4.4 4.4 196.0
12 20 5.3 5.3 137.8
2.0
3.1
4.1
5.1
6.1
291 3.54.21.8257 2 1.91.3
423 6.98.33.5 64 4 3.72.5
6 1010.412.5 5.3 29 6 5.6 3.8
86
13.9
16.67.116 87.55.0
10 417.320.8 8.9 10 10 9.3 6.3
20W MR16 WFL
40°
CMH Wide Flood
9000
4
6
8
10
12
61 4.1 3.4
276.1 5.0
158.1 6.7
1010.2 8.4
712.2 10.1
247 3.59.72.9133 2 3.42.1
4 12 6.919.3 5.8 33 4 6.7 4.1
65
10.4
29.08.715 6
10.16.2
8 3 13.938.711.6 8 8 13.4 8.2
10 2 17.348.314.6 5 10 16.810.3
1500
94 2.9 2.9
42 4.4 4.4
23 5.8 5.8
15 7.3 7.3
10 8.7 8.7
2 0.9 0.6
4 1.71.2
6 2.6 1.8
8 3.4 2.4
10 4.3 3.0
Photometric chart represents single lamp data at specified angle.
ORDERING INFORMATIOn: Rough-in and accessories ordered separately.
Example: XR16101-20H-BL
Example: HB-TL
Wattage/Lamp
Rough-In
-
20H
XR16101
1-Lamp Unit
20H
20W MR16 MH
XR16201
2-Lamp Unit
120/277V Electronic
Finish
Example: X16101WH
Accessories
Airfoil Trim
Finish
WH White
BL Black
SLSilver
GPGraphite
XR16301
3-Lamp Unit
XR16401
4-Lamp Linear
XR16404
4-Lamp Quad
For Surface Mount, replace “R” with “S” in Rough-In.
For Trac Mount, replace “R” wth “T” in Rough-In.
See www.junolightinggroup.com for more
information.
HB-TL Two 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 Two 52” C-Channel Bar Hangers, Pair
HB-28 Two 28” C-Channel Bar Hangers, Pair
LB-27 Two 27” Linear Bar Hangers, Pair
T741 Med. Pink Color Filter
T743 Daylight Blue Color Filter
T744 Med. Blue Color Filter
T745 Med. Amber Color Filter
T7401 Red Dichoric Lens
T7403 Med. Green Dichoric Lens
T7404 Med. Blue Dichoric Lens
T7405 Yellow Dichoric Lens
T7406 Magenta Dichoric Lens
T7411 Blue Green Dichoric Lens
T7416 Daylight Blue Correction Lens
T7418 Cosmetic Peach Correction Lens
T7477 Prismatic Lens
T7478 Linear Spread Lens
T7420 Diffuse Spread Lens
T7421 Uniformity Lens
T7422 UV Filter Lens
T7459BL
Hexcell Louver
X16101
1-Lamp Unit
X16201
2-Lamp Unit
WH White
BL Black
SLSilver
GPGraphite
X16301
3-Lamp Unit
X16401
4-Lamp Linear
X16404
4-Lamp Quad
23
DESIGNER COVE™ PAR20 CMH
OPEN APERTURE WITH WHITE TRIM FLANGE
# of Lamps
3
2
1
Ceiling Cutout
23 5/8” x 7 5/8”
6 1/6” x 7 5/8”
7 3/8” x 7 5/8”
A
22 7/8”
12 5/8”
6 1/2”
B
36 1/2”
26 3/8”
14 7/8”
product specifications
photometric data
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
D
MH
The beam spread in degrees and the beam “L” and
“W” in the above tables are computed at 50% of
centerbeam candlepower and represent areas of
“effective illumination.”
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Housing: Heavy gauge cold rolled steel
with white or black finish • Universal housing
design installs in suspended grid, plaster or
drywall
W
Lamp
Beam Beam Type Spread°
39W PAR20 SP
10°
Ceramic
Metal Halide
Trim: All units are furnished with a heavy
gauge white baked enamel trim
FL
30°
Rated
Life
MH FC
L
W
FC
-
39EMH
39EMH
DC201
1-Lamp unit 39W PAR20 Metal Halide
120/277V Electronic
DC202
2-Lamp unit
DC203
3-Lamp unit
24
Finish
White
Black
X
1.7 149 2.3 2.0
2.1 104 2.8 2.4
2.4 76 3.3 2.8
2.8 58 3.4 3.2
3.1 46 4.2 3.6
4 180 6.9
6 80 10.4
8 45 13.9
10 29 17.3
12 20 20.8
9000
6
8
10
12
14
139
78
50
35
26
3.2
4.3
5.4
6.4
7.5
3.2
4.3
5.4
6.4
7.5
2 156
3 69
4 39
5 25
6 17
Options
†347347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
D FC
1.7
2.1
2.4
2.8
3.1
90 4.4
51 5.9
32 7.3
23 8.8
1710.2
Accessories
W
BL
W
230
160
117
90
71
Example: HB-TL
Wattage/Lamp
L
10
12
14
16
18
Photometric chart represents single lamp data at specified angle.
Example: DC203-39EMH-BL
30°
9000 23000
5000
HB-TL 25”
HB-5252”
HB-2828”
LB-27 27”
HB-3434”
L
Aim Point
W
30°
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Fixture #
0
Aiming Angle (A = 30)
0°
CBCP
A
W
Aim Point
L
Aiming Angle (A = 0)
Labels and Listings
UL/C-UL listed for damp locations • I.B.E.W.
Union made
Product specifications subject to change
without notice.
0
Aim Point
L
**Due to steep aiming angle, length of beam extends
beyond 25’.
Adjustability: Yoke assembly provides 355°
rotation and up to 45° tilt of lamp
X
A
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
Channel Bar Hangers, Pair
† Consult Factory for Availability.
3.7
5.0
6.2
7.4
8.7
45°
L W
FC
X
L
W
2.9
4.3
5.7
7.2
8.6
1.4 5.8 4.0 1.4 1.0
2.1 226 6.0 2.1 1.5
2.8 127 8.0 2.8 2.0
3.5 81 10.0 3.5 2.5
4.2 56 12.0 4.2 3.0
3.5 5.5
5.2 8.2
6.9 10.9
8.7 13.7
10.4 16.4
2.1 442 2.0 2.3 1.5
3.2 196 3.0 3.5 2.3
4.3 110 4.0 4.6 3.0
5.4 71 5.0 5.8 3.8
6.4 49 6.0 6.9 4.5
MULTI-LAMP
DESIGNER COVE™ PAR30/38 CMH
OPEN APERTURE WITH WHITE TRIM FLANGE
# of Lamps
3
2
1
Ceiling Cutout
23 5/8” x 8 5/8”
16” x 8 5/8”
8 1/4” x 8 5/8”
A
22 3/4”
15 1/8”
7 1/2”
B
31 1/2”
23 3/4”
16”
product specifications
photometric data
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Adjustability: Yoke assembly provides
355° rotation and up to 45° tilt of lamp
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
D
MH
The beam spread in degrees and the beam “L” and
“W” in the above tables are computed at 50% of
centerbeam candlepower and represent areas of
“effective illumination.”
X
A
W
Beam Beam Rated
Type Spread° Life CBCP
Lamp
10°
39W SP
PAR30L
Ceramic Arc
Trim: All units are furnished with a heavy
gauge white baked enamel trim
900044000
30°
Metal Halide
Labels and Listings
UL/C-UL listed for fdamp locations •
I.B.E.W. Union made
FL
10°
70W
PAR30L
Ceramic Arc
Metal Halide
SP
Product specifications subject to change
without notice.
9000 7400
9000 68000
40°
FL
9000 10000
15°
100W
PAR38
Ceramic Arc
SP
1250070000
Metal
Halide
60°
WFL
12500 7000
A
W
Aim Point
0
Aim Point
L
L
**Due to steep aiming angle, length of beam extends
beyond 25’.
Housing: Heavy gauge cold rolled steel
with white or black finish • Universal
housing design installs in suspended grid,
plaster or drywall
0
Aim Point
Aiming Angle (A = 0)
0°
L
W
Aiming Angle (A = 30)
MH
FC
L
W
FC
30°
L
W
10
12
14
16
8
10
12
14
12
14
16
18
8
10
12
14
14
18
22
26
8
10
12
14
440
306
224
172
116
74
51
38
472
347
266
210
156
100
69
51
357
216
145
104
109
70
49
36
1.7
2.1
2.4
2.8
4.3
5.4
6.4
7.5
2.1
2.4
2.8
3.1
5.8
7.3
8.7
10.2
3.7
4.7
5.8
6.8
9.2
11.5
13.9
16.2
1.7
2.1
2.4
2.8
4.3
5.4
6.4
7.5
2.1
2.4
2.8
3.1
5.8
7.3
8.7
10.2
3.7
4.7
5.8
6.8
9.2
11.5
13.9
16.2
286
198
146
112
75
48
33
25
307
225
173
136
101
65
45
33
232
140
94
67
71
45
32
23
2.3
2.8
3.3
3.7
5.9
7.3
8.8
10.2
2.8
3.3
3.7
4.2
8.1
10.2
12.2
14.2
4.9
6.4
7.8
9.2
13.9
17.3
20.8
24.2
2.0
2.4
2.8
3.2
5.0
6.2
7.4
8.7
2.4
2.8
3.2
3.6
6.7
8.4
10.1
11.8
4.3
5.5
6.7
7.9
10.7
13.3
16.0
18.7
D
FC
5 220
6 153
7 112
8 86
3 103
4 58
5 37
6 26
5 340
6 236
7 173
8 133
3 139
4 78
5 50
6 35
8 137
10 88
12 61
14 34
2 219
3 97
4 55
5 35
30°
X
8.7
10.4
12.1
13.9
5.2
6.9
8.7
10.4
8.7
10.4
12.1
13.9
5.2
6.9
8.7
10.4
13.9
17.3
20.8
**
3.5
5.2
6.9
8.7
L
W
3.6 1.7
4.3 2.1
5.0 2.4
5.7 2.8
8.2 3.2
10.9 4.3
13.7 5.4
16.4 6.4
3.6 1.7
4.3 2.1
5.0 2.4
5.7 2.8
14.5 4.4
19.3 5.8
24.2 7.3
** 8.7
8.9 4.2
11.1 5.3
13.3 6.3
17.8 8.4
** 4.6
** 6.9
** 9.2
** 11.5
FC
45°
X
L
W
622 5.0 1.8
432 6.0 2.1
317 7.0 2.5
243 8.0 2.8
291 3.0 3.5
164 4.0 4.6
105 5.0 5.8
73 6.0 6.9
962 5.0 1.8
668 6.0 2.1
491 7.0 2.5
376 8.0 2.8
393 3.0 5.0
221 4.0 6.7
141 5.0 8.4
98 6.0 10.1
387 8.0 4.3
247 10.0 5.4
172 12.0 6.4
97 16.0 8.6
619 2.0 6.9
275 3.0 10.4
155 4.0 13.9
99 5.0 17.3
1.2
1.5
1.7
2.0
2.3
3.0
3.8
4.5
1.2
1.5
1.7
2.0
3.1
4.1
5.1
6.2
3.0
3.7
4.5
6.0
3.3
4.9
6.5
8.2
Photometric chart represents single lamp data at specified angle.
Lamp Multipliers:70W x 0.65
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: DC303-39EMH-BL
Example: HB-TL
Wattage/Lamp
Fixture #
DC301
1-Lamp unit; PAR30
DC302
2-Lamp unit; PAR30
DC303
3-Lamp Unit; PAR30
DC381
1-Lamp unit; PAR38
DC382
2-Lamp unit; PAR38
DC383
3-Lamp unit; PAR38
70EMH
70W, PAR30 Metal Halide
120/277V Electronic
Accessories
-
39EMH
39W PAR30 Metal Halide
120/277V Electronic
Options
Finish
WH White
BL Black
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** =
voltage)
†CP Chicago Plenum
HB-TL 25”
Pair
HB-5252”
HB-2828”
LB-27 27”
HB-3434”
Tru-Lock Grid Ceiling Bar Hangers,
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
Channel Bar Hangers, Pair
70EMH
70W, PAR38 Metal Halide
120/277V Electronic
100EMH
100W, PAR38 Metal Halide
120/277V Electronic
† Consult Factory for Availability.
25
m u l t i - spo t ® P A R 3 0 L cmh
6 3/4"
multi-lamp recessed adjustables
9 1/2"
11"
14 5/8"
6 3/4"
23 5/8"
8 1/2"
Ceiling
Cutout
8 1/2"
Ceiling
Cutout
13 5/8"
Ceiling Cutout
9 1/2"
11"
22 5/8"
Ceiling Cutout
14 5/8"
product specifications
Lamp Two or three 39W PAR30L or 70W
PAR30L medium base ceramic arc tube metal
halide lamps.
Socket Medium base, glazed porcelain • 4kV
pulse-rated with nickel-plated copper screw shell.
Lamp Housing Integral accessory holder and
metal snoot for improved lamp shielding • Can be
combined with accessory louver and/or accessory
color filers.
Aiming 34˚ vertical aiming capability (up to 45˚
if integral snoot is removed) • 360˚ horizontal
rotation • Each lampholder is individually aimable.
Trim Finish All Black with White Flange (BL) or
all White (WH).
Electronic Ballast May be replaced from above
or below ceiling • 120/277VAC input voltage.
Housing 22 gauge die-formed galvanized steel,
vented • Electrical connections can be made from
below the ceiling in an internal wireway or from
above the ceiling through a wireway access cover.
Trim Attaches to housing using torsion springs
• Lamps are replaced by removing lampholder
insert/snoot assembly but without removing trim
section.
Accessories A maximum of one louver and one
color filter may be used simultaneously in each
lampholder using integral accessory holder.
Labels U.L. listed for through-branch wiring
and damp location • Product thermally protected
against improper use of lamps or insulation • Union
made AFL-CIO • CSA Certified.
Testing All reports are based on published
industry procedures; field performance may differ
from laboratory performance.
Product specifications subject to change without
notice.
photometric data
8 1/2"
Ceiling
Cutout
CBCP • Centerbeam candlepower
FC • Footcandles at beam center
(aim point)
D
The beam spread in degrees and the beam “L” and
“W” in the above tables are computed at 50% of
centerbeam candlepower and represent areas of
“effective illumination.”
Lamp
39W PAR30L SP
10°
Ceramic Arc
Metal Halide
FL
30°
70W PAR30L SP
10°
Rated
Life
0
Aim Point
MH FC
L
Aim Point
W
Aiming Angle (A = 30)
0°
CBCP
0
L
Aiming Angle (A = 0)
22 5/8"
Ceiling Cutout
A
W
Aim Point
L
30°
30°
L
W
FC
L
W
9000 44000
10
12
14
16
18
440
306
224
172
136
1.7
2.1
2.4
2.8
3.1
1.7
2.1
2.4
2.8
3.1
286
198
146
112
88
2.3
2.8
3.3
3.4
4.2
2.0
2.4
2.8
3.2
3.6
4 244 6.8
5 220 8.7
6 153 10.4
7 112 12.1
8 86 13.9
9000
7400
8
10
12
14
16
116
74
51
38
29
4.3
5.4
6.4
7.5
8.6
4.3
5.4
6.4
7.5
8.6
75 5.9
48 7.3
33 8.8
2510.2
1911.7
5.0
6.2
7.4
8.7
9.9
2 231
3 103
4 58
5 37
6 26
9000 68000
10
12
14
16
18
680
472
347
266
210
1.7
2.1
2.4
2.8
3.1
1.7
2.1
2.4
2.8
3.1
2.0
2.4
2.8
3.2
3.6
4 531 6.9
5 340 8.7
6 236 10.4
7 173 12.1
8 133 13.9
9000 10000
8
10
12
14
16
156 5.8 5.8 101 8.1 6.7
100 7.3 7.3 6510.2 8.4
69 8.7 8.7 4512.2 10.1
5110.2 10.2 3314.2 11.8
3911.6 11.6 2516.2 13.4
Ceramic Arc
Metal Halide
FL
40°
X
A
W
**Due to steep aiming angle, length of beam extends
beyond 25’.
Beam Beam Type Spread°
81
Ce
Cu
13 5/8"
Ceiling Cutout
MH
442
307
225
173
136
2.3
2.8
3.3
3.7
4.2
D FC
X
45°
X
L
W
2.9
3.6
4.3
5.0
5.7
L W
1.4
1.7
2.1
2.4
2.8
972 4.0
622 6.0
432 8.0
317 10.0
243 12.0
1.4
1.8
2.1
2.5
2.8
1.0
1.2
1.5
1.7
2.0
3.5 5.5
5.2 8.2
6.9 10.9
8.7 13.7
10.4 16.4
2.1
3.2
4.3
5.4
6.4
654
291
164
105
73
2.0
3.0
4.0
5.0
6.0
2.3
3.5
4.6
5.8
6.9
1.5
2.3
3.0
3.8
4.5
1.4 1503
1.7 962
2.1 668
2.4 491
2.8 376
4.0
5.0
6.0
7.0
8.0
1.4
1.8
2.1
2.5
2.8
1.0
1.2
1.5
1.7
2.0
2.9
4.4
5.8
7.3
8.7
2.0
3.0
4.0
5.0
6.0
3.4
5.0
6.7
8.4
10.1
2.1
3.1
4.1
5.1
6.2
2.9
3.6
4.3
5.0
5.7
2 313 3.5 9.7
3 139 5.2 14.5
4 78 6.9 19.3
5 50 8.7 24.2
6 35 10.4 **
FC
884
393
221
141
98
Photometric chart represents single lamp data at specified angle.
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: MS303-39EMH-WH
MS302
2-Lamp unit
MS303
3-Lamp unit
Example: HB-TL
Wattage/Lamp
Rough-In
-
26
23 5/8"
Finish
39EMH
39W PAR30L CMH
120/277V Electronic
70EMH
70W PAR30L CMH
120/277V Electronic
Options
Accessories
W
BL
White
Black
†347347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
† Consult Factory for Availability.
HB-TL Two 25” Tru-Lock bar hangers
HB-28Two 28” C-channel bar hangers
HB-52Two 52” C-channel bar hangers
LB-27 Two 27” linear bar hangers
T569BL
Louver—3 3/4 Dia. with
1/2 Sq. Cells
T561 Med. Pink Color Filter
T562 Warm Red Color Filter
T563 Daylite Blue Color Filter
T564 Med. Blue Color Filter
T565 Med. Amber Color Filter
T566 Med. Green Color Filter
T5677Prismatic Spread Lens
T5678Linear Spread Lens
T5621Uniformity Lens
T5619Color Correction Lens/UV Filter
T5622UV Filter
6 11/16"
adjustable wall wash
MULTI-LAMP
m u l t i - spo t ® ed 1 7 W A L L W A S H
9 1/2"
11 7/8"
6 11/16"
6 11/16"
9 1/2"
11 7/8"
8 3/4"
Ceiling Cutout
6 11/16"
Drywall Ceiling cutout: 11 1/8˝ x 8 3/4˝
product specifications
photometric report
Lamp One 70W or 100W ED17 medium
base ceramic metal halide lamp.
Socket Medium base, glazed porcelain
• 4kV pulse-rated with nickel-plated copper
screw shell.
Lamp Holder Construction Extruded
aluminum lamp housing with die-cast
aluminum end caps and lens holder.
Aiming 35˚ vertical aiming capability.
Lens Uniformity glass lens included with
fixture.
Electronic Ballast May be replaced from
above or below ceiling • 120/277VAC
input voltage.
Trim Finish Black (BL), Silver (SL) or White
(WH) finish.
Housing 22 gauge die-formed galvanized
steel • Electrical connections can be made
from below the ceiling in an internal
wireway or from above the ceiling through a
wireway access cover.
Trim Painted trim attaches to housing using
2 torsion springs and an electrical quickconnector • Sturdy extruded aluminum lamp
housing with die-cast aluminum end caps
and textured painted housing • Lamp may
be replaced without removing trim section.
Labels U.L. listed for through-branch wiring
and damp location • Product thermally
protected against improper use of lamps or
insulation • Union made AFL-CIO • CSA
Certified.
Testing All reports are based on published
industry procedures; field performance may
differ from laboratory performance.
Product specifications subject to change
without notice.
Catalog Number: MS120
8 3/4"
Test Number: PT05050301
Ceiling Cutout
Luminaire Spacing Criteria @ 90°: 1.32
Lamps: One MHC70/U/M/3K lamp rated @ 6200 lumens.
3’ FROM WALL
11 1/8"
Fixture Performance
CeilingSingle
Cutout
0
0 1’ 2’3’4’5’
Distance
Multiple Fixture Performance
4’ 5’
from Ceiling
3’ FROM WALL
3’
50°
One 70W ED17
Lamp at 6,200
Total Lumens
1’
2’
3’
4’
5’
6’
7’
8’
9’
6’
169 141 67 21 8 3 188151188170 76 170166 44 166
1291126924104 1531601531609616015555155
77 67 5023115 10411710410190101945894
47 43 3420105 7382736771 67605060
30 27 2418105 5658564754 47414441
20 19 1714 9 5 4544453640 36293429
14 13 1210 8 5 3534352830 28232623
10109865 272727232323182018
7 7 7654 222222191819151615
4’ FROM WALL
0
Distance
Single Fixture Performance
0 1’ 2’3’4’5’
1’
2’
3’
4’
5’
6’
7’
8’
9’
91 81 5626115 1181261189474 94884988
94 85 6231137 12714412711110411110369103
64 59 4831157 1001141008799 87797479
44 40 3324138 7883786776 67596159
30 29 2419127 6362635157 51444944
21 20 1815117 5148514144 41343834
15 15 1312107 4139413434 34273027
11 11 10 9 8 6 3332 33 2927 2923 24 23
9 8 8765 272727232223191919
from Ceiling
4’ FROM WALL
4’
50°
One 70W ED17
Lamp at 6,200
Total Lumens
*Multipliers: 100W ED17 - 1.48
Multiple Fixture Performance
4’ 5’
6’
*Note: Multipliers are provided for estimating purposes only.
Use IES photometric files for precise photometric information.
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: MS120-70EMH-WH
Rough-In
Example: HB-TL
Wattage/Lamp
MS120 MS120
ED17 MH
Lamp
† Consult Factory for Availability.
11 1/8"
Ceiling Cutout
Finish
70EMH
70W ED17 CMH
120/277V Electronic
100EMH
100W ED17 CMH
120/277V Electronic
Options
Accessories
W White
BL Black
SLSilver
†347347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
TMR60BL Black Vertical Louver
TMRL1
UV Filer
27
CMH Adjustable
Accent Fixtures
The Indy CMH product line represents the
most extensive array of adjustable fixtures
in the industry. The collection includes
internally adjustable, pull down, and semirecessed units… all with energy efficient,
long life, ceramic metal halide lamps.
The internally adjustable fixtures are
designed for easy aiming and adjustment,
as well as good glare control for task and
All Indy CMH adjustable fixtures are versatile, flexible and
accent lighting. They tilt up to 35º and
able to perform even the most challenging accent-lighting
rotate 360º. Rotation and tilt locking are standard, and lamps
assignments. They are available in
can be replaced without having to re-aim the fixture. Pull-
a range of aperture colors and finishes and come standard
down fixtures use a smooth-operating scissor mechanism to
with matching trim flange. T-lamp equipped fixtures come with
achieve maximum aiming capability for accent and display
interchangeable locked optics, a unique feature that combines
lighting. They tilt up to 90º, rotate 355º, and lock securely in
the advantage of locked-in lighting patterns with the ability to
desired position. The semi-recessed fixtures combine high-
change them when necessary using optional interchangeable
efficiency accent lighting with a less intrusive appearance at
reflectors. And the proprietary Tru-Lock bar hanger system
the ceiling level. These fixtures tilt up to 45º and rotate 355º.
makes installation easy, fast and economical.
Indy CMH Adjustable Accent features:
• Ceramic metal halide lamps save energy and reduce
relamping costs.
• Fixture styles include internally adjustable, pull down and
semi-recessed.
• Adjustable tilt ranges from 35º to 90º depending on
fixture style; all rotate 355º to 360º.
• Wide range of architectural finishes with matching built-in
ceiling flange.
• Interchangeable locked optics for T-lamps use optional
• Universal mounting brackets accommodate Tru-Lock and
industry standard linear bars, 1/2” EMT, and 3/4” and
1-1/2” C-channels.
• High power factor 120/277 universal voltage electronic or
dual-tap magnetic ballasts.
• Oversized junction boxes for ease of wiring.
• UL/C-UL Listed.
• A host of options and accessories enhances both
functionality and versatility.
reflectors to provide beam spread flexibility.
• Proprietary, self-centering Tru-Lock bar hanger system for
suspended ceilings saves time; cuts installation costs.
29
4” T4 cmH internally adjustable, low glare
Open aperture, electronic ballast
15 1/4"
15"
12 1/8"
4 3/8" Dia.
Open
4 7/8" Dia.
Ceiling Cutout
product specifications
photometric data
Upper Reflector: Faceted, specular Alzak
reflector available in spot, narrow flood and flood
beam distributions
Lower Cone: Low iridescent specular or satin
Alzak® .050” thick angle cut cone in clear, gold,
wheat, pewter or bronze with integral flange of
same finish; other finishes available upon request
• Painted white flange is optional
Ballast: T4/T4.5 and T4 Mini – Universal
120/277 volt electronic solid state, high power
factor and reliable starting to -30°C • BT5 – 120
volt electronic solid state, high power factor and
reliable starting to -20°C
Lamp Holder: T4/T4.5 – G8.5 bi-pin socket
base with recessed female contacts • 1A, 750V,
rated for 5KV pulse • T4 Mini – Twist and lock
GU6.5 base; 2A, 250V rated for 5KV pulse •
BT5 – Twist and lock PGJ5 base; 2A, 250V rated
for 2.5KV pulse
Adjustability: Yoke assembly allows 360˚
rotation and up to 35˚ tilt of lamp • Rotation and
tilt locking are standard
Housing: Heavy gauge steel with black baked
enamel finish
Mounting Frame: Accommodates ceilings up to
3/4” thick; ceiling thickness adapter accessory is
available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp locations
• I.B.E.W. Union made
Product specifications subject to change without
notice.
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
®
Vertical Candela
Angle
90°—
0
5,000
Candlepower 5,000
5,000
10,000
Distribution10,000
10,000
15,000
15,000
15,000
20,000
20,000
20,000
25,000
25,000
25,000
30,000
30,000
30,000
35,000
35,000
35,000
40,000
40,000
40,000
45,000
45,000
45,000
0
80°—
0
Beam
AXIS
Beam
AXIS
Beam
AXIS
75°—
0
70°—
0
65°—
0
60°—
0
55°—
0
50°—
0
45°—
0
40°—
0
35°—
0
30°—
35
25°—
85
20°—
333
15°—
946
10°—
3192
5°— 12166
0°— 31843
Vertical Candela
Angle
90°—
0
Candlepower
1,000
Distribution 1,000
Beam
AXIS
Beam
AXIS
Beam
AXIS
1,000
2,000
2,000
2,000
3,000
3,000
3,000
4,000
4,000
4,000
5,000
5,000
5,000
6,000
6,000
6,000
7,000
7,000
7,000
8,000
8,000
8,000
9,000
9,000
9,000
85°—
0
80°—
0
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
0
0
0
0
0
0
0
5
16
52
175
830
2529
5249
7964
9065
Vertical Candela
Angle
90°—
0
1,000
1,000
1,000
2,000
2,000
2,000
3,000
3,000
3,000
4,000
4,000
4,000
5,000
5,000
5,000
6,000
6,000
6,000
7,000
7,000
7,000
8,000
8,000
8,000
9,000
9,000
9,000
Beam
AXIS
Beam
AXIS
Beam
AXIS
Candlepower
Distribution
85°—
85°—
0
80°—
0
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
0
0
0
0
0
0
0
6
25
132
734
1841
3148
4218
4786
4959
Footcandles
Dist.@ Center@ Edge Dia.
6’885 439.08’
Cat. No.:
7’650 3231.0’
M4A-T4-39E +
8’498 2471.1’
MT400AS-CL
9’393 1951.2’
Lamp Data:
10’314 158 1.4’
CDM35/TC/830
11’263 131 1.5’
12’221 110 1.6’
Beam Spread: 7.8°
13’188 94 1.8’
14’163 81 1.9’
15’142 70 2.0’
Footcandles
Lamp: T4 39W
Dist.@ Center@ Edge Dia.
Metal Halide
6’252 1212.4’
Narrow Flood
7’185 89 2.8’
Cat. No.:
8’142 68 3.1’
M4A-T4-39E +
9’112 54 3.5’
MT400AN-CL
10’91 44 3.9’
Lamp Data:
11’75 36 4.3’
CDM35/TC/830
12’63 30 4.7’
Beam Spread: 22.3° 13’54 26 5.1’
14’46 22 5.5’
15’40 19 5.9’
Footcandles
Lamp: T4 39W
Dist.@ Center@ Edge Dia.
Metal Halide
6’138 61 3.8’
Flood
7’101 45 4.4’
Cat. No.:
8’78 345.0’
M4A-T4-39E +
9’61 275.6’
MT400AF-CL
10’50 22 6.3’
11’41 18 6.9’
Lamp Data:
12’34 15 7.5’
CDM35/TC/830
13’29 13 8.2’
Beam Spread:
14’25 11 8.8’
34.8°
15’22 10 9.4’
Lamp: T4 39W
Metal Halide Spot
Lamp Multipliers:20W - 0.52
70W - 1.94
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M4A-BT-20E1
M4A-T4
T4/4.5 MH
Lamp
G8.5 base
M4A-TM1
T4 Mini
MH Lamp
GU6.5 base
M4A-BT2
BT5 MH
Lamp
PGJ5 base
30
Example: MT400AN-CL
Wattage/Lamp
Rough-In
Options
20E
(T4 Mini, T4/T4.5) 20W
120/277V Electronic
20E1
(BT5 only) 20W 120V
Electronic
39E
(T4/T4.5 only) 39W
120/277V Electronic
70E
(T4/T4.5 only) 70W
120/277V Electronic
Color Options
Reflector
Example: HB-TL
Finish
†347347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MT400AS
Angle Cut
Cone, Spot
Beam
MTT400AN
Angle Cut
Cone, Narrow
Flood Beam
MT400AF
Angle Cut
Cone, Flood
Beam
Options
Accessories
C Clear
GGold
WT Wheat
PTPewter
BZ Bronze
B Black
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
† Consult Factory for Availability
1
GE SuperMini T4
2
Philips Mini MasterColor® CDM-Tm
HB-TL 25”
HB-5252”
HB-2828”
LB-27 27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
6” T4 cmh internally adjustable, low glare
Open aperture, electronic ballast
15"
12 1/8"
15 1/4"
ADJUSTABLES
6" Dia. Open
6 7/8" Dia.
Ceiling Cutout
product specifications
photometric data
Upper Reflector: Faceted, specular Alzak
reflector available in spot, narrow flood and flood
beam distributions
Lower Cone: Low iridescent specular or satin
Alzak® .050” thick angle cut cone in clear, gold,
wheat, pewter or bronze with integral flange of
same finish; other finishes available upon request
• Painted white flange is optional
Ballast: T4/T4.5 and T4 Mini – Universal
120/277 volt electronic solid state, high power
factor and reliable starting to -30°C • BT5 – 120
volt electronic solid state, high power factor and
reliable starting to -20°C
Lamp Holder: T4/T4.5 – G8.5 bi-pin socket
base with recessed female contacts • 1A, 750V,
rated for 5KV pulse • T4 Mini – Twist and lock
GU6.5 base; 2A, 250V rated for 5KV pulse •
BT5 – Twist and lock PGJ5 base; 2A, 250V rated
for 2.5KV pulse
Adjustability: Yoke assembly allows 360˚
rotation and up to 35˚ tilt of lamp • Rotation and
tilt locking are standard
Housing: Heavy gauge steel with black baked
enamel finish
Mounting Frame: Accommodates ceilings up to
3/4” thick; ceiling thickness adapter accessory is
available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp locations
• I.B.E.W. Union made
Product specifications subject to change without
notice.
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
®
Vertical Candela
Angle
90°—
0
Candlepower
Distribution
85°—
0
80°—
0
75°—
0
70°—
0
65°—
0
60°—
0
55°—
0
50°—
0
45°—
6
40°—
14
35°—
35
30°—
153
25°—
331
20°—
715
15°—
1806
10°—
5283
5°— 13017
0°— 19089
Candlepower
Distribution
Vertical Candela
Angle
90°—
0
85°—
0
80°—
0
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
0
0
0
0
2
3
7
16
51
213
629
1628
3639
5752
6839
7135
Vertical Candela
Angle
90°—
0
Candlepower
Distribution
85°—
0
80°—
0
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
0
0
0
0
0
6
12
33
125
651
1522
2516
3173
3474
3865
4305
Footcandles
Dist.@ Center@ Edge Dia.
6’530 1241.4’
Cat. No.:
7’390 2011.6’
M6A-T4-39E +
8’298 1541.9’
MT600AS-CL
9’236 1222.1’
Lamp Data:
10’191 94 2.3’
CDM35/TC/830
11’158 81 2.6’
Beam Spread: 13.2° 12’133 68 2.8’
13’113 58 3.0’
14’97 50 3.2’
15’85 44 3.5’
Footcandles
Lamp: T4 39W
Dist.@ Center@ Edge Dia.
Metal Halide
6’198 94 3.2’
Narrow Flood
7’146 69 3.7’
Cat. No.:
8’112 53 4.2’
M6A-T4-39E +
9’88 424.7’
MT600AN-CL
10’71 34 5.3’
Lamp Data:
11’59 28 5.8’
CDM35/TC/830
12’50 24 6.3’
Beam Spread: 29.5° 13’42 20 6.9’
14’36 17 7.4’
15’32 15 7.9’
Footcandles
Lamp: T4 39W
Dist.@ Center@ Edge Dia.
Metal Halide
6’120 48 4.8’
Flood
7’88 365.6’
Cat. No.:
8’67 276.4’
M6A-T4-39E +
9’53 227.2’
MT600AF-CL
10’43 17 8.0’
11’36 14 8.8’
Lamp Data:
12’30 12 9.6’
CDM35/TC/830
13’26 1010.4’
Beam Spread:
14’22 9 11.2’
43.5°
15’19 8 12.0’
Lamp: T4 39W
Metal Halide Spot
Lamp Multipliers:20W - 0.52
70W - 1.94
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6A-BT-20E1
M6A-T4
T4/T4.5
MH Lamp
G8.5 base
M6A-TM1
T4 Mini
MH Lamp
GU6.5
base
M6A-BT1
BT5 MH
Lamp
PGJ5 base
Example: MT600AN-CL
Wattage/Lamp
Rough-In
Options
20E
(T4 Mini, T4/T4.5)
20W 120V/277V Electronic
20E1
(BT5 only)
20W 120V Electronic
39E
(T4/T4.5 only)
39W 120/277V Electronic
70E
(T4/T4.5 only)
70W 120/277V Electronic
† Consult Factory for Availability
1
GE SuperMini T4
2
Philips Mini MasterColor® CDM-Tm
Color Options
Reflector
Example: HB-TL
Finish
†347347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MT600AS
Angle Cut Cone,
Spot Beam
MT600AN
Angle Cut Cone,
Narrow Flood
Beam
MT600AF
Angle Cut Cone,
Flood Beam
Options
Accessories
C Clear
GGold
WT Wheat
PTPewter
BZ Bronze
B Black
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
HB-TL
HB-52
HB-28
LB-27
25” Tru-Lock grid ceiling bar hangers, Pair
52” C-Channel Bar Hangers, Pair
28” C-Channel Bar Hangers, Pair
27” Linear Bar Hangers, Pair
31
4” T6 cmh internally adjustable, low glare
Open aperture, electronic ballast
15 1/4"
15"
12 1/8"
4 3/8" Dia.
Open
4 7/8" Dia.
Ceiling Cutout
product specifications
photometric data
Upper Reflector: Faceted, specular Alzak
reflector available in spot, narrow flood and
flood distributions
Lower Cone: Low iridescent specular or
satin Alzak® .050” thick angle cut cone in
clear, gold, wheat, pewter or bronze with
integral flange of same finish; other finishes
available upon request • Painted white flange
is
optional
Ballast: Universal 120/277 volt electronic
solid state, high power factor and reliable
starting to -30°C
Lamp Holder: G12 socket base with heavy
duty recessed female contacts • 660W, 600V
rated for 5KV pulse
Adjustability: Yoke assembly allows 360˚
rotation and up to 35˚ tilt of lamp • Rotation
and tilt locking are standard
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
®
Vertical Candela
Angle
90°—
0
Candlepower 5,000
5,000
5,000
Distribution 10,000
10,000
10,000
15,000
15,000
15,000
20,000
20,000
20,000
25,000
25,000
25,000
30,000
30,000
30,000
35,000
35,000
35,000
40,000
40,000
40,000
45,000
45,000
45,000
0
80°—
0
Beam
AXIS
Beam
AXIS
Beam
AXIS
75°—
0
70°—
0
65°—
0
60°—
0
55°—
0
50°—
0
45°—
5
40°—
13
35°—
42
30°—
91
25°—
259
20°—
801
15°—
2435
10°—
7223
5°— 19790
0°— 36912
Vertical Candela
Angle
90°—
0
2,000
2,000
2,000
4,000
4,000
4,000
6,000
6,000
6,000
8,000
8,000
8,000
10,000
10,000
10,000
12,000
12,000
12,000
14,000
14,000
14,000
16,000
16,000
16,000
18,000
18,000
18,000
85°—
0
80°—
0
75°—
0
70°—
0
65°—
0
60°—
0
55°—
0
50°—
3
45°—
14
40°—
49
35°—
54
30°—
99
25°—
449
20°—
1685
15°—
4813
10°—
9929
5°— 14663
0°— 16420
Beam
AXIS
Beam
AXIS
Beam
AXIS
Candlepower
Distribution
85°—
Vertical Candela
Angle
90°—
0
Candlepower
Distribution
Beam
AXIS
Beam
AXIS
Beam
AXIS
1,000
1,000
1,000
2,000
2,000
2,000
3,000
3,000
3,000
4,000
4,000
4,000
5,000
5,000
5,000
6,000
6,000
6,000
7,000
7,000
7,000
8,000
8,000
8,000
9,000
9,000
9,000
85°—
0
80°—
0
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
0
0
0
0
0
0
6
22
58
302
1373
3301
5585
7731
8613
9003
Footcandles
Dist.@ Center@ Edge Dia.
6’1025 506 1.1’
Cat. No.:
7’753 3721.3’
M4A-T6-70E +
8’577 2851.5’
MT400AS-CL
9’456 2251.7’
Lamp Data:
10’369 182 1.9’
CDM70/T6/830
11’305 151 2.1’
Beam Spread: 10.7° 12’256 127 2.3’
13’218 108 2.4’
14’188 93 2.6’
15’164 81 2.8’
Footcandles
Lamp: T6 70W
Dist.@ Center@ Edge Dia.
Metal Halide
6’456 2192.4’
Narrow Flood
7’355 1612.8’
Cat. No.:
8’257 1233.2’
M4A-T6-70E +
9’203 97 3.6’
MT400AN-CL
10’164 79 4.1’
Lamp Data:
11’136 65 4.5’
CDM70/T6/830
12’114 55 4.9’
Beam Spread: 22.9° 13’97 47 5.3’
14’84 40 5.7’
15’73 35 6.1’
Footcandles
Lamp: T6 70W
Dist.@ Center@ Edge Dia.
Metal Halide
6’250 1113.7’
Flood
7’184 82 4.3’
Cat. No.:
8’141 62 4.9’
M4A-T6-70E +
9’111 49 5.5’
MT400AF-CL
10’90 40 6.2’
11’74 33 6.8’
Lamp Data:
12’63 28 7.4’
CDM70/T6/830
13’53 24 8.0’
Beam Spread:
14’46 20 8.6’
34.2°
15’40 18 9.2’
Lamp: T6 70W
Metal Halide Spot
Lamp Multipliers:39W - 0.55
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M4A-T6-39E
Rough-In
M4A-T6 M4A-T6
T6 MH
Lamp
Options
39E
39W T6 MH, 120/277V
Electronic
Color Options
Reflector
-
70E
70W T6 MH 120/277V
Electronic
32
Example: MT400AN-CL
Wattage/Lamp
Example: HB-TL
Finish
†347347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MT400AS
Angle Cut
Cone, Spot
Beam
MT400AN
Angle Cut
Cone, Narrow
Flood Beam
MT400AF
Angle Cut
Cone, Flood
Beam
Options
Accessories
C Clear
GGold
WT Wheat
PTPewter
BZ Bronze
B Black
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
† Consult Factory for Availability
HB-TL 25”
HB-5252”
HB-2828”
LB-27 27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
6” t6 cmh internally adjustable, low glare
Open aperture, electronic ballast
15"
12 1/8"
ADJUSTABLES
15 1/4"
18 3/4" (150W)
6" Dia. Open
6 7/8" Dia.
Ceiling Cutout
product specifications
lamp data
Upper Reflector: Faceted, specular Alzak
reflector available in spot, narrow flood and
flood beam distributions
Lower Cone: Low iridescent specular or
satin Alzak® .050” thick angle cut cone in
clear, gold, wheat, pewter or bronze with
integral flange of same finish; other finishes
available upon request • Painted white flange
is optional
Ballast: Universal 120/277 volt electronic
solid state, high power factor and reliable
starting to -30°C
Lamp Holder: G12 socket base with heavy
duty recessed female contacts • 660W, 600V
rated for 5KV pulse
Adjustability: Yoke assembly allows 360˚
rotation and up to 35˚ tilt of lamp • Rotation
and tilt locking are standard
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
®
Vertical Candela
Angle
90°—
0
Candlepower
Distribution
85°—
0
80°—
0
75°—
0
70°—
0
65°—
0
60°—
0
55°—
0
50°—
9
45°—
15
40°—
53
35°—
98
30°—
385
25°—
893
20°—
1876
15°—
4344
10°—
9862
5°— 20521
0°— 30218
Vertical Candela
Angle
90°—
0
Candlepower
Distribution
85°—
0
80°—
0
75°—
0
70°—
0
65°—
0
60°—
0
55°—
3
50°—
9
45°—
22
40°—
55
35°—
114
30°—
521
25°—
1439
20°—
3312
15°—
6680
10°— 10265
5°— 12006
0°— 13109
Vertical Candela
Angle
90°—
0
Candlepower
Distribution
85°—
0
80°—
0
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
0
0
0
0
3
11
34
64
340
1442
3026
4493
5547
6060
6876
8162
Footcandles
Dist.@ Center@ Edge Dia.
6’839 4281.5’
Cat. No.:
7’617 3141.7’
M6A-T6-70E +
8’472 2411.9’
MT600AS-CL
9’373 1902.2’
Lamp Data:
10’302 154 2.4’
CDM70/T6/830
11’250 127 2.7’
Beam Spread: 13.9° 12’210 107 2.9’
13’179 91 3.2’
14’154 78 3.4’
15’134 69 3.6’
Footcandles
Lamp: T6 70W
Dist.@ Center@ Edge Dia.
Metal Halide
6’364 1723.2’
Narrow Flood
7’268 1263.7’
Cat. No.:
8’205 97 4.2’
M6A-T6-70E +
9’162 76 4.8’
MT600AN-CL
10’131 62 5.3’
Lamp Data:
11’108 51 5.8’
CDM70/T6/830
12’91 43 6.3’
Beam Spread: 29.6° 13’78 37 6.9’
14’67 32 7.4’
15’58 27 7.9’
Footcandles
Lamp: T6 70W
Dist.@ Center@ Edge Dia.
Metal Halide
6’227 93 4.7’
Flood
7’167 69 5.5’
Cat. No.:
8’128 52 6.2’
M6A-T4-70E +
9’101 42 7.0’
MT600AF-CL
10’82 34 7.8’
11’68 28 8.6’
Lamp Data:
12’57 23 9.4’
CDM70/T6/830
13’48 2010.2’
Beam Spread:
14’42 1710.9’
42.7°
15’36 1511.7’
Lamp: T6 70W
Metal Halide Spot
Lamp Multipliers:39W - 0.55
150W - 2.10
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6A-T6-150E1
Example: MT600AN-CL
Wattage/Lamp
Rough-In
M6A-T6 -
39E
39W T6 MH, 120/277V
Electronic
M6A-T6
T6 MH
Lamp
Options
70E
70W T6 MH 120/277V
Electronic
E
150E1
150W T6 MH 120V Electronic
E
150E2
150W T6 MH 277V Electronic
Example: HB-TL
Finish
†347347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Indicates that the product meets DOE energy efficient
standards - EISA compliant.
† Consult Factory for Availability
1
Add “-150” for 150W
Example: MT600AS-150-CL
E
Color Options
Reflector
MT600AS1
Angle Cut Cone,
Spot Beam
MT600AN1
Angle Cut Cone,
Narrow Flood
Beam
MT600AF1
Angle Cut Cone,
Flood Beam
MT600AS-150
150W T6 MH
Angle Cut Cone,
Spot Beam
MT600AN-150
150W T6 MH
Angle Cut Cone,
Narrow Beam
MT600AF-150
150W T6 MH
Angle Cut Cone,
Flood Beam
Options
Accessories
C Clear
GGold
WT Wheat
PTPewter
BZ Bronze
B Black
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
HB-TL
HB-52
HB-28
LB-27
25” Tru-Lock grid ceiling bar hangers, Pair
52” C-Channel Bar Hangers, Pair
28” C-Channel Bar Hangers, Pair
27” Linear Bar Hangers, Pair
33
8” T6 CMH internally adjustable, low glare
Open aperture, electronic ballast
15"
12 1/8"
15 1/4"
18 3/4" (150W)
7 3/8" Dia. Open
8 1/8" Dia.
Ceiling Cutout
product specifications
photometric data
Upper Reflector: Faceted, specular Alzak
reflector available in spot, narrow flood and
flood beam distributions
Lower Cone: Low iridescent specular or
satin Alzak® .050” thick angle cut cone in
clear, gold, wheat, pewter or bronze with
integral flange of same finish; other finishes
available upon request • Painted white
flange is optional
Ballast: Universal 120/277 volt electronic
solid state, high power factor and reliable
starting to -30°C
Lamp Holder: G12 socket base with heavy
duty recessed female contacts • 660W,
600V rated for 5KV pulse
Adjustability: Yoke assembly allows 360˚
rotation and up to 35˚ tilt of lamp • Rotation
and tilt locking are standard
Housing: Heavy gauge steel with black baked
enamel finish
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
®
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Vertical Candela
Angle
90°—
0
Candlepower
Distribution
85°—
0
80°—
0
75°—
0
70°—
0
65°—
0
60°—
0
55°—
0
50°—
11
45°—
23
40°—
68
35°—
221
30°—
622
25°—
958
20°—
1817
15°—
4330
10°— 10046
5°— 21267
0°— 34679
Vertical Candela
Angle
90°—
0
Candlepower
Distribution
Candlepower
Distribution
85°—
0
80°—
0
Lamp: T6 70W
Metal Halide Spot
Cat. No.:
M8A-T6-70E +
MT800AS-CL
photometric data:
CDM70/T6/830
Beam Spread: 12.6°
Lamp: T6 70W
Metal Halide
Narrow Flood
75°—
0
70°—
0
65°—
0
60°—
0
55°—
4
50°—
10
45°—
35
40°—
67
35°—
260
30°—
773
25°—
1446
20°—
3127
15°—
6536
10°— 10519
5°— 13030
0°— 16796
Cat. No.:
M8A-T6-70E +
MT800AN-CL
Vertical Candela
Angle
90°—
0
Lamp: T6 70W Metal
Halide Flood
85°—
0
80°—
0
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
0
0
0
0
0
4
13
51
212
1021
2404
4210
6155
7600
8217
8869
photometric data:
CDM70/T6/830
Beam Spread: 25.2°
Cat. No.:
M8A-T6-70E +
MT800AF-CL
photometric data:
CDM70/T6/830
Beam Spread: 38.0°
Lamp Multipliers:39W - 0.55
150W - 2.10
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8A-T6-70E
-
Options
70E
70W T6 MH 120/277V
Electronic
E
150E1
150W T6 MH 120V Electronic
E
150E2
150W T6 MH 277V Electronic
Example: HB-TL
Color Options
Reflector
39E
39W T6 MH, 120/277V
Electronic
M8A-T6
T6 MH
Lamp
34
Example: MT800AN-CL
Wattage/Lamp
Rough-In
Finish
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MT800AS1
Angle Cut Cone, Spot Beam
MT800AN1
Angle Cut Cone, Narrow Flood
Beam
MT800AF1
Angle Cut Cone, Flood Beam
MT800AS-150
150W T6 MH Angle Cut Cone,
Spot Beam
MT800AN-150
150W T6 MH Angle Cut Cone,
Narrow Flood Beam
MT800AF-150
150W T6 MH Angle Cut Cone,
Flood Beam
Footcandles
Dist.@ Center@ Edge Dia.
6’963 4851.3’
7’708 3571.5’
8’542 2731.8’
9’428 2162.0’
10’347 175 2.2’
11’287 144 2.4’
12’241 121 2.6’
13’205 103 2.9’
14’177 89 3.1’
15’154 78 3.3’
Footcandles
Dist.@ Center@ Edge Dia.
6’467 2212.7’
7’343 1623.1’
8’262 1243.6’
9’207 98 4.0’
10’168 79 4.5’
11’139 66 4.9’
12’117 55 5.4’
13’99 47 5.8’
14’86 41 6.3’
15’
75
35 6.7’
Footcandles
Dist.@ Center@ Edge Dia.
6’246 1084.1’
7’181 79 4.8’
8’139 61 5.5’
9’110 48 6.2’
10’89 39 6.9’
11’73 32 7.6’
12’62 27 8.3’
13’53 23 8.9’
14’45 20 9.6’
15’39 1710.3’
Options
Accessories
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
W White
WH White Flange HB-TL 25” Tru-Lock grid ceiling
bar hangers, Pair
HB-52 52” C-Channel Bar
Hangers, Pair
HB-28 28” C-Channel Bar
Hangers, Pair
LB-27 27” Linear Bar Hangers,
Pair
Indicates that the product meets DOE energy efficient
standards - EISA compliant.
† Consult Factory for Availability
1
Add “-150” for 150W
Example: MT800AS-150-CL
E
4” MR16 cmh internally adjustable, low glare
Open aperture, electronic ballast
10 7/8"
6 5/8"
13 7/16"
ADJUSTABLES
4 1/2" Dia.
Open
5 1/4" Dia.
Ceiling Cutout
product specifications
Cone: Specular or satin Alzak® .050” thick angle cut
cone in clear, gold, wheat, pewter or bronze with
integral flange of same finish; other finishes available
upon request • Painted white flange is optional
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Vertical Candela
Angle
90°—
0
Candlepower
Distribution
Baffle: White or black painted angle cut multi-groove
aluminum baffle insert with integral flange painted
white
Slot: 1 5/16” x 2 1/4” slot aperture can be used as
a downlight or adjustable and permits 50˚ off vertical
adjustment • White baked enamel finish
Pinhole: 1 5/16” diameter pinhole aperture downlight • White baked enamel finish
80°—
3
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
5
8
13
27
45
71
116
163
175
165
198
330
723
1995
5725
9000
85°—
Lamp Holder: Twist and lock GX10 base lamp holder
provides precise positioning of lamp for excellent optical control in luminaires
Housing: Heavy gauge steel with black baked enamel
finish
1
Vertical Candela
Angle
90°—
1
Ballast: Universal 120/277 volt electronic solid state,
high power factor and reliable starting to -30°C
Adjustability: Yoke assembly allows 360˚ rotation
and up to 35˚ tilt of lamp • Rotation and tilt locking
are standard
85°—
4
80°—
8
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
16
25
35
46
57
71
91
119
157
210
315
594
1205
2038
2671
2900
Vertical Candela
Angle
90°—
2
Candlepower
Distribution
Mounting Frame: Accommodates ceilings up to 3/4”
thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp locations
• I.B.E.W. Union made
Product specifications subject to change without notice.
85°—
5
80°—
10
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
18
27
36
47
61
81
104
133
176
274
484
837
1185
1403
1465
1500
Lamp: CMH 20W
MR16 SP
Beam Spread: 12°
Lamp: CMH 20W
MR16 FL
Beam Spread: 25°
Lamp: CMH 20W
MR16 WFL
Beam Spread: 40°
Footcandles
Dist.@ Center@ Edge Dia.
6’250 1231.3’
7’184 90 1.5’
8’141 69 1.7’
9’111 55 1.9’
10’90 44 2.1’
11’74 37 2.3’
12’63 31 2.5’
13’53 26 2.7’
14’46 23 2.9’
15’40 20 3.2’
Footcandles
Dist.@ Center@ Edge Dia.
6’ 81 3772.7’
7’59 283.1’
8’45 213.5’
9’36 174.0’
10’29 13 4.4’
11’24 11 4.9’
12’20 9 5.3’
13’17 8 5.8’
14’15 7 6.2’
15’13 6 6.6’
Footcandles
Dist.@ Center@ Edge Dia.
6’42 174.4’
7’31 135.1’
8’23 105.8’
9’19 8 6.6’
10’15 6 7.3’
11’12 5 8.0’
12’10 4 8.7’
13’9 4 9.5’
14’8 310.2’
15’7 310.9’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M4A-MR16-20E
Rough-In
Example: MP400A-MR16-CL
Wattage/Lamp
M4A-MR16 M4A-MR16 20E
MR16 MH 20W MR16 MH, 120/277V
Lamp
Electronic
† Consult Factory for Availability
Options
Color Options
Reflector
-
Example: HB-TL
Finish
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MP400A-MR16
Angle Cut Cone
MP400ABMR16-B
Angle Cut, Black
Baffle
MP400ABMR16-W
Angle Cut,
White Baffle
MP400SLTMR16-W
Slotted
Aperture, White
MP400PINMR16-W
Pinhole
Aperture, White
Options
Accessories
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
W White
Blank for baffle,
pinhole, slot
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle, pinhole, slot
Blank for white
WH White Flange
HB-TL
25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27
27” Linear Bar Hangers, Pair
HCL16 Hexcell Louver
1061-R Red Color Filter
1061-LB Light Blue Color Filter
1061-MB Medium Blue Color Filter
1061-A Amber Color Filter
1061-G Green Color Filter
1061-PGLPrismatic Glass Lens
1061-LSL Linear Spread Lens
35
4” PAR20 CMH internally adjustable, low glare
Open aperture, electronic ballast
15 1/8"
7 3/4"
12 3/4"
4 1/2" Dia.
Open
5 1/8" Dia.
Ceiling Cutout
product specifications
Cone: Low iridescent specular or satin Alzak®
.050” thick angle cut cone in clear, gold, wheat,
pewter, bronze or black with integral flange of
same finish; other finishes available upon request
Baffle: White or black painted angle cut multigroove aluminum baffle insert with integral
flange painted white
Slot: 1-5/16” x 2-1/4” slot aperture can be
used as a downlight or adjustable and permits
50° off vertical adjustment • White baked
enamel finish
Pinhole: 1-5/16” diameter Pinhole aperture
downlight • White baked enamel finish
Ballast: Universal 120/277 Volt electronic solid
state (see ordering information below for details),
high power factor and reliable starting to -30°C
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell
Adjustability: Yoke assembly allows 355° rotation and up to 35° tilt of lamp • Rotation and tilt
locking are standard
Housing: Heavy gauge steel with black baked
enamel finish
Mounting Frame: Accommodates ceilings up to
3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without
notice.
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Candlepower
Distribution
Lamp: 35 Watt PAR20 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’ 833 4121.05’
Beam Spread: 10°
7’ 612 3031.22’
8’ 469 2321.40’
9’ 370 1831.57’
10’300 1481.75’
11’248 1231.92’
12’208 1032.10’
13’178 88 2.27’
14’153 76 2.45’
15’133 66 2.62’
Candlepower
Distribution
Lamp: 35 Watt PAR20 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’167 753.22’
Beam Spread: 30°
7’122 553.75’
8’ 94 424.29’
9’ 74 334.82’
10’60 275.36’
11’50 225.89’
12’42 196.43’
13’36 166.97’
14’31 147.50’
15’27 128.04’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M4A-P20-39E
Rough-In
M4A-P20 M4A-P20
36
Example: MP400A-P20-CL
Wattage/Lamp
39E
39E
39W PAR20 MH, 120/277V
Electronic
Options
Reflector
-
Example: HB-TL
Color Options
Finish
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
Blank for baffle,
pinhole, slot
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
Accessories
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MP400A-P20
Angle Cut
Cone
MP400ABP20-B
Angle Cut,
Black Baffle
MP400SLTP20-W
Slotted
Aperture,
White
MP400PINP20-W
Pinhole
Aperture,
White
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
† Consult Factory for Availability
6” par30l/38 cmh internally adjustable, low glare
Open aperture, electronic ballast
15"
12 1/8"
15 1/4"
18 3/4" (150W)
ADJUSTABLES
6" Dia.
Open
6 7/8" Dia.
Ceiling Cutout
product specifications
Cone: Low iridescent specular or satin
Alzak® .050” thick angle cut cone in clear,
gold, wheat, pewter, bronze or black with
integral flange of same finish; other finishes
available upon request • Painted white
flange is optional
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Candlepower
Distribution
Lamp: 39 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,167 577 1.05’
Beam Spread: 10°
7’ 857 4241.22’
8’ 656 3241.40’
9’ 518 2561.57’
10’420 2081.75’
11’347 1721.92’
12’292 1442.10’
13’249 1222.27’
14’214 1062.45’
15’187 92 2.62’
Candlepower
Distribution
Lamp: 70 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,333 659 1.05’
Beam Spread: 10°
7’ 980 4841.22’
8’ 750 3711.40’
9’ 593 2931.57’
10’480 2371.75’
11’397 1961.92’
12’333 1652.10’
13’140 1402.27’
14’245 1212.45’
15’213 1052.62’
Candlepower
Distribution
Lamp: 70 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’194 814.37’
Beam Spread: 40°
7’143 595.10’
8’109 455.82’
9’ 86 366.55’
10’70 297.28’
11’57 248.00’
12’49 208.74’
13’41 179.46’
14’36 1510.19’
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell
Adjustability: Yoke assembly allows 355°
rotation and up to 35° tilt of lamp • Rotation
and tilt locking are standard
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
15’31 13
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6A-P30-39E
M6A-P30
39W only
M6A-P38
70, 100
& 150W
only
Example: MP600A-P38-CL-WH
Wattage/Lamp
Rough-In
Options
39E
39W PAR30L MH, 120/277V
Electronic
70E
70W PAR30L/PAR38 MH,
120/277V Electronic
100E
100W PAR38 MH, 120/277V
Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MP600A-P38
Angle Cut
Cone
Options
Accessories
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
150E120
150WPAR38MH,120VElectronic
150E277
150WPAR38MH,277VElectronic
† Consult Factory for Availability
37
6” par38 cmh internally adjustable, easy adjustment
Open aperture, electronic ballast
15"
12 1/8"
16 1/4"
18 3/4" (150W)
6" Dia.
Open
6 7/8" Dia.
Ceiling Cutout
product specifications
Cone: Low iridescent specular or satin Alzak®
.050” thick angle cut cone in clear, gold,
wheat, pewter, bronze or black with integral
flange of same finish; other finishes available upon request • Painted white flange is
optional
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Lamp: 70 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’ 777 3841.05’
Beam Spread: 15°
7’ 571 2821.22’
8’ 438 2161.40’
9’ 346 1711.57’
10’280 1381.75’
11’231 1141.92’
12’194 96 2.10’
13’166 82 2.27’
14’143 71 2.45’
15’124 62 2.62’
Lamp: 70 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’ 444 2003.22’
Beam Spread: 25°
7’ 327 1473.75’
8’ 250 1134.29’
9’198 894.82’
10’160 72 5.36’
11’132 60 5.89’
12’111 50 6.43’
13’95 436.97’
14’82 377.50’
15’71 328.04’
Lamp: 100 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,944 951 1.50’
Beam Spread: 15°
7’1,429 698 1.70’
8’1,094 535 2.00’
9’ 864 4232.00’
10’700 3422.50’
11’579 2832.70’
12’486 2382.90’
13’414 2033.20’
14’357 1753.40’
15’311 1523.70’
Candlepower
Distribution
Baffle: White or black painted multi-groove
aluminum baffle insert with
integral flange painted white
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below for
details), high power factor and reliable starting to -30°C
Candlepower
Distribution
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell
Adjustability: Yoke assembly allows 355°
rotation and up to 35° tilt of lamp • Rotation
and tilt locking are standard • Lamp collar
provides easy adjustment by hand
Housing: Heavy gauge steel with black baked
enamel finish
Mounting Frame: Accommodates ceilings up
to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Candlepower
Distribution
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without
notice.
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6A-P38-70E
M6A-P38
M6A-P38
Example: MP600SC-P38-CL-WH
Wattage/Lamp
Rough-In
-
Options
70E
70W PAR38 MH, 120/277V
Electronic
100E
100W PAR38 MH, 120/277V
Electronic
150E120
150W PAR38 MH, 120V
Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MP600SC-P38
Straight Cone
MP600SB-P38
Straight Baffle
Options
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
only
WH White Flange
150E277
150W PAR38 MH, 277V
Electronic
38
Accessories
-
† Consult Factory for Availability
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
8” par30L/38 cmh internally adjustable, low glare
Open aperture, electronic ballast
15"
12 1/8"
15 1/4"
18 3/4" (150W)
ADJUSTABLES
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
Cone: Low iridescent specular or satin Alzak®
.050” thick angle cut cone in clear, gold,
wheat, pewter, bronze or black with integral
flange of same finish; other finishes available upon request • Painted white flange is
optional
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Lamp: 70 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,333 659 1.05’
Beam Spread: 10°
7’ 980 4841.22’
8’ 750 3711.40’
9’ 593 2931.57’
10’480 2371.75’
11’397 1961.92’
12’333 1652.10’
13’140 1402.27’
14’245 1212.45’
15’213 1052.62’
Lamp: 70 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’194 814.37’
Beam Spread: 40°
7’143 595.10’
8’109 455.82’
9’ 86 366.55’
10’70 297.28’
11’57 248.00’
12’49 208.74’
13’41 179.46’
14’36 15
10.19’
15’31
13
Footcandles
Lamp: 100 Watt PAR38
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,944 951 1.50’
Beam Spread: 15°
7’1,429 698 1.70’
8’1,094 535 2.00’
9’ 864 4232.20’
10’700 3422.50’
11’579 2832.70’
12’486 2382.90’
13’414 2033.20’
14’357 1753.40’
15’311 1523.70’
Candlepower
Distribution
Baffle: White or black painted multi-groove
aluminum baffle insert with integral flange
painted white
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below for
details), high power factor and reliable starting to -30°C
Candlepower
Distribution
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell
Adjustability: Yoke assembly allows 355°
rotation and up to 35° tilt of lamp • Rotation
and tilt locking are standard • Lamp collar
provides easy adjustment by hand
Housing: Heavy gauge steel with black baked
enamel finish
Mounting Frame: Accommodates ceilings up
to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Candlepower
Distribution
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without
notice.
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8A-P30-39E
M8A-P30
39W only
M8A-P38
70, 100
& 150W
only
Example: P800A-P38-CL-WH
Wattage/Lamp
Rough-In
Options
39E
39W PAR30L MH, 120/277V
Electronic
70E
70W PAR30L/PAR38 MH,
120/277V Electronic
100E
100W PAR38 MH, 120/277V
Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
P800A-P38
Angle Cut
Cone
Options
Accessories
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
150E120
150WPAR38MH,120VElectronic
150E277
150WPAR38MH,277VElectronic
† Consult Factory for Availability
39
8” par38 cmh internally adjustable, easy adjustment
Open aperture, electronic ballast
15"
12 1/8"
15 1/4"
18 3/4" (150W)
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
Cone: Low iridescent specular or satin Alzak®
.050” thick angle cut cone in clear, gold,
wheat, pewter, bronze or black with integral
flange of same finish; other finishes available upon request • Painted white flange is
optional
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Lamp: 70 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’ 777 3841.05’
Beam Spread: 15°
7’ 571 2821.22’
8’ 438 2161.40’
9’ 346 1711.57’
10’280 1381.75’
11’231 1141.92’
12’194 96 2.10’
13’166 82 2.27’
14’143 71 2.45’
15’124 62 2.62’
Lamp: 70 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’ 444 2003.22’
Beam Spread: 25°
7’ 327 1473.75’
8’ 250 1134.29’
9’198 894.82’
10’160 72 5.36’
11’132 60 5.89’
12’111 50 6.43’
13’95 436.97’
14’82 377.50’
15’71 328.04’
Footcandles
Lamp: 100 Watt
Dist.@ Center@ Edge Dia.
PAR38
6’1,944 951 1.50’
Metal Halide Spot
7’1,429 698 1.70’
Beam Spread: 15°
8’1,094 535 2.00’
9’ 864 4232.00’
10’700 3422.50’
11’579 2832.70’
12’486 2382.90’
13’414 2033.20’
14’357 1753.40’
15’311 1523.70’
Candlepower
Distribution
Baffle: White or black painted multi-groove
aluminum baffle insert with integral flange
painted white
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below for
details), high power factor and reliable starting to -30°C
Candlepower
Distribution
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell
Adjustability: Yoke assembly allows 355°
rotation and up to 35° tilt of lamp • Rotation
and tilt locking are standard • Lamp collar
provides easy adjustment by hand
Housing: Heavy gauge steel with black baked
enamel finish
Candlepower
Distribution
Mounting Frame: Accommodates ceilings up
to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without
notice.
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8A-P38-70E
M8A-P38
M8A-P38
Example: P800SC-P38-CL-WH
Wattage/Lamp
Rough-In
-
Options
70E
70W PAR38 MH, 120/277V
Electronic
100E
100W PAR38 MH, 120/277V
Electronic
150E120
150W PAR38 MH, 120V
Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
P800SC-P38
Straight Cone
P800SB-P38
Straight Baffle
Options
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
WH White Flange
150E277
150W PAR38 MH, 277V
Electronic
40
Accessories
-
† Consult Factory for Availability
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
CMH
Pulldown
Adjustables
6 ” p a r 2 0 cmh p u l l d o w n a d j u s t a b l e
electronic ballast
11 11/16"
10 3/8"
12 1/2"
ADJUSTABLES
6" Dia.
Open
6 7/8" Dia.
Ceiling Cutout
product specifications
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Lamp: 39 Watt PAR20 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’ 833 4121.05’
Beam Spread: 10°
7’ 612 3031.22’
8’ 469 2321.40’
9’ 370 1831.57’
10’300 1481.75’
11’248 1231.92’
12’208 1032.10’
13’178 88 2.27’
14’153 76 2.45’
15’133 66 2.62’
Lamp: 39 Watt PAR20 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’167 753.22’
Beam Spread: 30°
7’122 553.75’
8’ 94 424.29’
9’ 74 334.82’
10’60 275.36’
11’50 225.89’
12’42 196.43’
13’36 166.97’
14’31 147.50’
15’27 128.04’
Candlepower
Distribution
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Adjustability: Scissor arm assembly secures
lamp housing at any desired position within
the fixture housing or when fully extended
below ceiling has 355° rotation and up to
90° tilt
Candlepower
Distribution
Lamp Housing/Cone: Exterior of lamp housing and trim cone are white baked enamel
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: M6PD-P20-39E
Rough-In
M6PD-P20 M6PD-P20
Example: HB-TL
Wattage/Lamp
39E
39E
39W PAR20 MH, 120/277V
Electronic
† Consult Factory for Availability
Options
Accessories
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HB-TL
HB-52
HB-28
LB-27
932
25” Tru-Lock grid ceiling bar hangers, Pair
52” C-Channel Bar Hangers, Pair
28” C-Channel Bar Hangers, Pair
27” Linear Bar Hangers, Pair
Louver and holder
43
6” par20 cmh semi-recessed adjustable
electronic ballast
11 11/16"
6 3/4"
12 1/2"
6" Dia.
Open
6 7/8" Dia.
Ceiling Cutout
product specifications
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Lamp: 39 Watt PAR20 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’ 833 4121.05’
Beam Spread: 10°
7’ 612 3031.22’
8’ 469 2321.40’
9’ 370 1831.57’
10’300 1431.75’
11’248 1231.92’
12’208 1032.10’
13’178 88 2.27’
14’153 76 2.45’
15’133 66 2.62’
Lamp: 39 Watt PAR20 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’167 753.22’
Beam Spread: 30°
7’122 553.75’
8’ 94 424.29’
9’ 74 334.82’
10’60 275.36’
11’50 225.89’
12’42 196.43’
13’36 166.97’
14’31 147.50’
15’27 128.04’
Candlepower
Distribution
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Adjustability: Yoke assembly provides 355°
rotation and up to 45° tilt of lamp housing
Lamp Housing/Cone: Exterior of lamp housing and trim cone are white baked enamel
Candlepower
Distribution
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: M6SR-P20-39E
Rough-In
M6SR-P20 M6SR-P20
44
Example: HB-TL
Wattage/Lamp
39E
39E
39W PAR20 MH, 120/277V
Electronic
Options
Accessories
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HB-TL
HB-52
HB-28
LB-27
932
25” Tru-Lock grid ceiling bar hangers, Pair
52” C-Channel Bar Hangers, Pair
28” C-Channel Bar Hangers, Pair
27” Linear Bar Hangers, Pair
Louver and holder
† Consult Factory for Availability
8” par30 cmh pulldown adjustable
electronic ballast
15 1/16"
12 1/8"
15 3/16"
ADJUSTABLES
7 7/16" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Candlepower
Distribution
Lamp: 39 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,167 577 1.05’
Beam Spread: 10°
7’ 857 4241.22’
8’ 656 3241.40’
9’ 518 2561.57’
10’420 2081.75’
11’347 1721.92’
12’292 1442.10’
13’249 1222.27’
14’214 1062.45’
15’187 92 2.62’
Candlepower
Distribution
Lamp: 70 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,333 659 1.05’
Beam Spread: 10°
7’ 980 4841.22’
8’ 750 3711.40’
9’ 593 2931.57’
10’480 2371.75’
11’397 1961.92’
12’333 1652.10’
13’140 1402.27’
14’245 1212.45’
15’213 1052.62’
Lamp: 70 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’194 814.37’
Beam Spread: 40°
7’143 595.10’
8’109 455.82’
9’ 86 366.55’
10’70 297.28’
11’57 248.00’
12’49 208.74’
13’41 179.46’
14’ 36 1510.19’
15’ 31 1310.92’
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Adjustability: Scissor arm assembly secures
lamp housing at any desired position within
the fixture housing or when fully extended
below ceiling has 355° rotation and up to
90° tilt
Lamp Housing/Cone: Exterior of lamp housing and trim cone are white baked enamel
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Candlepower
Distribution
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: M8PD-P30-39E
Rough-In
M8PD-P30 M8PD-P30
Example: HB-TL
Wattage/Lamp
Options
Accessories
39E
39W PAR30 MH, 120/277V
Electronic
70E
70W PAR30 MH, 120/277V
Electronic
† Consult Factory for Availability
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HB-TL
HB-52
HB-28
LB-27
931
25” Tru-Lock grid ceiling bar hangers, Pair
52” C-Channel Bar Hangers, Pair
28” C-Channel Bar Hangers, Pair
27” Linear Bar Hangers, Pair
Louver and holder
45
electronic ballast
13 1/16"
7 5/16"
14 13/16"
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Candlepower
Distribution
Lamp: 39 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,167 577 1.05’
Beam Spread: 10°
7’ 857 4241.22’
8’ 656 3241.40’
9’ 518 2561.57’
10’420 2081.75’
11’347 1721.92’
12’292 1442.10’
13’249 1222.27’
14’214 1062.45’
15’187 92 2.62’
Candlepower
Distribution
Lamp: 70 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,333 659 1.05’
Beam Spread: 10°
7’ 980 4841.22’
8’ 750 3711.40’
9’ 593 2931.57’
10’480 2371.75’
11’397 1961.92’
12’333 1652.10’
13’140 1402.27’
14’245 1212.45’
15’213 1052.62’
Lamp: 70 Watt PAR30 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’194 814.37’
Beam Spread: 40°
7’143 595.10’
8’109 455.82’
9’ 86 366.55’
10’70 297.28’
11’57 248.00’
12’49 208.74’
13’41 179.46’
14’ 36 1510.19’
15’ 31 1310.92’
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Adjustability: Yoke assembly provides 355°
rotation and up to 45° tilt of lamp housing
Lamp Housing/Cone: Exterior of lamp housing and trim cone are white baked enamel
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
Candlepower
Distribution
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: M8SR-P30-39E
Rough-In
M8SR-P30 M8SR-P30
39E
39E
39W PAR30 MH, 120/277V
Electronic
70E
70W PAR30 MH, 120/277V
Electronic
46
Example: HB-TL
Wattage/Lamp
Options
Accessories
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HB-TL
HB-52
HB-28
LB-27
931
25” Tru-Lock grid ceiling bar hangers, Pair
52” C-Channel Bar Hangers, Pair
28” C-Channel Bar Hangers, Pair
27” Linear Bar Hangers, Pair
Louver and holder
† Consult Factory for Availability
8 ” PAR 3 8 CMH PULLDOWN ADJUSTABLE
electronic ballast
15 1/8"
12 1/8"
15 3/16"
18 3/4" (150W)
ADJUSTABLES
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Lamp: 70 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’ 777 3841.05’
Beam Spread: 15°
7’ 571 2821.22’
8’ 438 2161.40’
9’ 346 1711.57’
10’280 1381.75’
11’231 1141.92’
12’194 96 2.10’
13’166 82 2.27’
14’143 71 2.45’
15’124 62 2.62’
Lamp: 70 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’ 444 2003.22’
Beam Spread: 25°
7’ 327 1473.75’
8’ 250 1134.29’
9’198 894.82’
10’160 72 5.36’
11’132 60 5.89’
12’111 50 6.43’
13’95 436.97’
14’82 377.50’
15’71 328.04’
Lamp: 100 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,944 951 1.50’
Beam Spread: 15°
7’1,429 698 1.70’
8’1,094 535 2.00’
9’ 864 4232.20’
10’700 3422.50’
11’579 2832.70’
12’486 2382.90’
13’414 2033.20’
14’357 1753.40’
15’311 1523.70’
Candlepower
Distribution
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Adjustability: Scissor arm assembly secures
lamp housing at any desired position within
the fixture housing or when fully extended
below ceiling has 355° rotation and up to
90° tilt
Candlepower
Distribution
Lamp Housing/Cone: Exterior of lamp housing and trim cone are white baked enamel
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Candlepower
Distribution
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: M8PD-P38-70E
Rough-In
M8PD-P38 M8PD-P38
Example: HB-TL
Wattage/Lamp
Options
Accessories
70E
70W PAR38 MH, 120/277V
Electronic
100E
100W PAR38 MH, 120/277V
Electronic
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HB-TL
HB-52
HB-28
LB-27
816
25” Tru-Lock grid ceiling bar hangers, Pair
52” C-Channel Bar Hangers, Pair
28” C-Channel Bar Hangers, Pair
27” Linear Bar Hangers, Pair
Louver and holder
150E120
150W PAR38 MH, 120V
Electronic
150E277
150W PAR38 MH, 277V
Electronic
† Consult Factory for Availability
47
electronic ballast
13 1/16"
7 5/16"
14 13/16"
17 7/16" (150W)
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Lamp: 70 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’ 777 3841.05’
Beam Spread: 15°
7’ 571 2821.22’
8’ 438 2161.40’
9’ 346 1711.57’
10’280 1381.75’
11’231 1141.92’
12’194 96 2.10’
13’166 82 2.27’
14’143 71 2.45’
15’124 62 2.62’
Lamp: 70 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Flood
6’ 444 2003.22’
Beam Spread: 25°
7’ 327 1473.75’
8’ 250 1134.29’
9’198 894.82’
10’160 72 5.36’
11’132 60 5.89’
12’111 50 6.43’
13’95 436.97’
14’82 377.50’
15’71 328.04’
Lamp: 100 Watt PAR38 Footcandles
Dist.@ Center@ Edge Dia.
Metal Halide Spot
6’1,944 951 1.50’
Beam Spread: 15°
7’1,429 698 1.70’
8’1,094 535 2.00’
9’ 864 4232.20’
10’700 3422.50’
11’579 2832.70’
12’486 2382.90’
13’414 2033.20’
14’357 1753.40’
15’311 1523.70’
Candlepower
Distribution
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Adjustability: Yoke assembly provides 355°
rotation and up to 45° tilt of lamp housing
Lamp Housing/Cone: Exterior of lamp housing and trim cone are white baked enamel
Candlepower
Distribution
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
Candlepower
Distribution
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: M8SR-P38-70E
Rough-In
M8SR-P38 M8SR-P38
Example: HB-TL
Wattage/Lamp
Options
Accessories
70E
70W PAR38 MH, 120/277V
Electronic
100E
100W PAR38 MH, 120/277V
Electronic
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
HB-TL
HB-52
HB-28
LB-27
816
25” Tru-Lock grid ceiling bar hangers, Pair
52” C-Channel Bar Hangers, Pair
28” C-Channel Bar Hangers, Pair
27” Linear Bar Hangers, Pair
Louver and holder
150E120
150W PAR38 MH, 120V
Electronic
150E277
150W PAR38 MH, 277V
Electronic
48
† Consult Factory for Availability
8 ” ED 1 7 c m h p u l l d o w n a d j u s t a b l e
open aperture, electronic ballast
15 1/8"
12 1/8"
15 1/8"
18 3/4" (150W)
ADJUSTABLES
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
photometric data
Reflector: Spot reflector provides precise
beam control • Flood reflector is optional
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Candlepower
Distribution
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below for
details), high power factor and reliable starting to -30°C
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell • Socket prevents the use of non-containment type metal halide lamps
Adjustability: Scissor arm assembly secures
lamp housing at any desired position within
the fixture housing or when fully extended
below ceiling has 355° rotation and up to
90° tilt
Candlepower
Distribution
Lamp Housing/Cone: Exterior of lamp housing and trim cone are white baked enamel
Housing: Heavy gauge steel with black baked
enamel finish
Mounting Frame: Accommodates ceilings up
to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Footcandles
Dist.@ Center@ Edge Dia.
6’1,558 767 1.2’
7’1,144 564 1.4’
Beam Spread: 12°
8’876 4321.6’
9’692 3411.8’
10’561 276 2.0’
11’463 228 2.2’
12’389 192 2.4’
13’332 163 2.6’
14’286 141 2.8’
15’249 123 3.0’
Footcandles
Lamp: 100 Watt
Dist.@ Center@ Edge Dia.
Clear ED-17
6’522 2393.0’
Metal Halide Flood
7’384 1753.5’
Beam Spread: 25°
8’294 1344.0’
9’232 1064.5’
10’188 86 5.0’
11’155 71 5.5’
12’131 60 6.0’
13’111 51 6.5’
14’96 44 7.0’
15’84 38 7.5’
Footcandles
Lamp: 100 Watt
Dist. @ Center@ Edge Dia.
Clear ED-17
Hor/VerHor/Ver
Metal Halide Linear
6’ 360 171/1382.3’/5.3’
Spread Lens
7’ 265 126/1012.6’/6.2’
8’ 203 96/783.0’/7.1’
9’ 160 76/613.4’/8.0’
10’ 130 62/503.8’/8.8’
11’ 107 51/414.1’/9.7’
12’ 90 43/344.5’/10.6’
13’ 77 36/294.9’/11.5’
14’ 66 31/255.3’/12.4’
15’ 58 27/225.6’/13.3’
Lamp: 100 Watt
Clear ED-17
Metal Halide Spot
Candlepower
Distribution
Candela Candela
0° Hor. 90 Hor.
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without
notice.
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: M8PD-ED-100E
M8PD-ED
M8PD-ED
Example: HB-TL
Wattage/Lamp
Rough-In
-
Options
Accessories
347 347 Volt
70E
70W ED17 Clear protected MH, ***F Fuse and Fuse Holder
(Where *** = voltage)
120/277V Electronic
†CP Chicago Plenum
100E
100W ED17 Clear protected MH, FL Flood Reflector
120/277V Electronic
HB-TL
HB-52
HB-28
LB-27
FCG
LSP
25” Tru-Lock grid ceiling bar hangers, Pair
52” C-Channel Bar Hangers, Pair
28” C-Channel Bar Hangers, Pair
27” Linear Bar Hangers, Pair
Flat Clear Glass Lens
Linear Spread Lens
150E120
150W ED17 Clear protected MH,
120V Electronic
150E277
150W ED17 Clear protected MH,
277V Electronic
† Consult Factory for Availability
49
8” ed17 cmh pulldown adjustable
Enclosed aperture, electronic ballast
15 1/8"
12 1/8"
15 1/8"
18 3/4" (150W)
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
Reflector: Spot reflector provides precise
beam control • Flood reflector is optional
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Candlepower
Distribution
Lens: Protective tempered glass lamp shield
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Adjustability: Scissor arm assembly secures
lamp housing at any desired position within
the fixture housing or when fully extended
below ceiling has 355° rotation and up to
90° tilt
Candlepower
Distribution
Lamp Housing/Cone: Exterior of lamp housing and trim cone are white baked enamel
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Footcandles
Dist.@ Center@ Edge Dia.
6’1,558 767 1.2’
7’1,144 564 1.4’
Beam Spread: 12°
8’876 4321.6’
9’692 3411.8’
10’561 276 2.0’
11’463 228 2.2’
12’389 192 2.4’
13’332 163 2.6’
14’286 141 2.8’
15’249 123 3.0’
Footcandles
Lamp: 100 Watt
Dist.@ Center@ Edge Dia.
Clear ED-17
6’522 2393.0’
Metal Halide Flood
7’384 1753.5’
Beam Spread: 25°
8’294 1344.0’
9’232 1064.5’
10’188 86 5.0’
11’155 71 5.5’
12’131 60 6.0’
13’111 51 6.5’
14’96 44 7.0’
15’84 38 7.5’
Footcandles
Lamp: 100 Watt
Dist. @ Center@ Edge Dia.
Clear ED-17
Hor/VerHor/Ver
Metal Halide Linear 6’ 360 171/1382.3’/5.3’
Spread Lens
7’ 265 126/1012.6’/6.2’
8’ 203 96/783.0’/7.1’
9’ 160 76/613.4’/8.0’
10’ 130 62/503.8’/8.8’
11’ 107 51/414.1’/9.7’
12’ 90 43/344.5’/10.6’
13’ 77 36/294.9’/11.5’
14’ 66 31/255.3’/12.4’
15’ 58 27/225.6’/13.3’
Lamp: 100 Watt
Clear ED-17
Metal Halide Spot
Candlepower
Distribution
Candela Candela
0° Hor. 90 Hor.
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: M8PD-EDS-100E
Rough-In
M8PD-EDS M8PD-EDS
Example: HB-TL
Wattage/Lamp
Options
Accessories
70E
347 347 Volt
70W ED17 Clear non-protected ***F Fuse and Fuse Holder
MH, 120/277V Electronic
(Where *** = voltage)
†CP Chicago Plenum
100E
100W ED17 Clear non-protected FL Flood Reflector
MH, 120/277V Electronic
HB-TL
HB-52
HB-28
LB-27
LSP
25” Tru-Lock grid ceiling bar hangers, Pair
52” C-Channel Bar Hangers, Pair
28” C-Channel Bar Hangers, Pair
27” Linear Bar Hangers, Pair
Linear Spread Lens
150E120
150W ED17 Clear non-protected
MH, 120V Electronic
150E277
150W ED17 Clear non-protected
MH, 277V Electronic
50
† Consult Factory for Availability
CMH
Dura-Life
System
The unique, energy-efficient Indy Performance Series Dura-Life system offers extra-long relamping cycles, making it the ideal choice
for locations where lamp maintenance is difficult, costly or security
is a concern. The patented design economically doubles the operating lamp life of an H.I.D. fixture without
sacrificing light output or efficiency.
These ingenious luminaires utilize two metal halide lamps and
selectively ignite the lamp with the fewest operating hours, thus
burning one lamp at a time until both lamps reach end-of-life. The
result is a luminaire that operates two times longer than a standard
single lamp luminaire, therefore cutting lamp replacement and
maintenance in half. In addition, restrike time is typically instantaneous for the non-energized lamp.
Indy Dura-Life fixtures are available in either recessed or
surface-mounted styles. Recessed units come in a range of
attractive colors and finishes and have matching built-in trim
flanges (painted white flange optional). Surface-mounted
cylinders are made of heavy-gauge aluminum and are available in either black or white. Cylinders can also be mounted
as pendants.
Indy CMH Dura-Life features:
• Patented twin-lamp system operates one lamp at a time,
doubling relamping cycles.
• Uses energy efficient, long-life T6 ED17 or BT/ED28
ceramic metal halide lamps.
• Near instantaneous restrike for non-energized lamp.
• Recessed models include 25” Tru-Lock proprietary bar
hanger system for grid ceiling installation.
• Cylinder models can be installed as surface, wall mount or
pendants with the optional pendant mounting kit.
• UL/C-UL Listed.
• A host of options and accessories enhances both
functionality and versatility.
53
8” T6 dura-life cmh lenslite for 2 lamps
enclosed aperture, electronic ballast
6 3/4"
15 1/8"
7 3/8" Dia. Open
13"
8 1/8" Dia.
Ceiling Cutout
17 7/16" (150W)
product specifications
photometric data
Lower Cone: Regressed aluminum cone •
Low iridescent specular or satin Alzak® cone
in clear, gold, wheat, pewter or bronze with
integral flange of same finish; other finishes
available upon request • Painted white flange
is optional
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Upper Reflector: Faceted, specular Alzak®
reflector with clear Alzak® finish
Lens: Clear glass, prismatic glass and fresnel
glass
Ballast: Universal 120/277 volt electronic
solid state, high power factor and reliable
starting to -30°C
Lamp Holder: G12 socket base with heavy
duty recessed female contacts • 660W, 600V
rated for 5KV pulse
Housing: Heavy gauge die formed aluminum
Mounting Frame: Accommodates ceilings up
to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
Catalog Number: m8hd-t6-70E
Test Number: PR11070901
Total Luminaire Efficiency: 58.1%
Luminaire Spacing Criteria: 1.0
Lamps: One Philips CDM70/T6/830, rated at 6600 lumens.
Candlepower
Distribution
90ϒ
85ϒ
500
75ϒ
1000
65ϒ
1500
2000
55ϒ
2500
45ϒ
3000
3500
35ϒ
4000
4500
0ϒ 5ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
117
8’ x 8’
66
10’ x 10’
42
12’ x 12’
29
15ϒ
25ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’92 297.2’
7’68 228.4’
8’52 179.6’
9’ 41 1310.8’
10’33 1112.0’
11’27 9 13.2’
12’23 7 14.4’
13’20 6 15.6’
14’17 5 16.8’
15’15 5 18.0’
Lamp Multipliers:39W - 0.55
150W - 2.10
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8HD-T6-150E1
Example: MT852LC-CL-PG
Wattage/Lamp
Rough-In
M8HD-T6 -
70E
2x70W T6 MH 120/277V
Electronic
E
150E1
2x150W T6 MH 120V
Electronic
E
150E2
2x150W T6 MH 277V
Electronic
Color Options
Reflector
39E
2x39W T6 MH, 120/277V
Electronic
M8HD-T6
T6 MH
Lamp
Options
Example: HB-TL
Finish
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MT852LC
Lower Cone
MT852B
Lower Baffle
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black (baffle only)
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
Options
Accessories
WH White Flange
WET Wet Location
Listing
HB-TL 25” Tru-Lock grid
ceiling bar hangers, Pair
HB-52 52” C-Channel Bar
Hangers, Pair
HB-28 28” C-Channel Bar
Hangers, Pair
LB-27 27” Linear Bar
Hangers, Pair
SCA8-*Sloped Ceiling
Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA8-20
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
Indicates that the product meets DOE energy efficient
standards - EISA compliant.
† Consult Factory for Availability
E
54
Lens Type
9” ed17 horizontal dura-life cmh lenslite for 2 lamps
ENCLOSED aperture, MAGNETIC ballast
8 1/4"
16"
8 9/16" Dia.
Open
25"
9 1/4" Dia.
Ceiling Cutout
photometric data
Lower Cone: Regressed aluminum cone
• White painted or low iridescent Alzak®
cone • Alzak® cone can be clear, gold,
wheat, pewter or bronze, in specular or satin
finish • Painted white flange is optional
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell in die-cast socket housing • Socket
prevents the use of metal halide lamps that are
not “open fixture” rated • 2 lamp “Dura-Life”
design reduces lamp changes and decreases
restrike time by operating one lamp at a time
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Lens: Clear glass, prismatic glass and Fresnel
glass
Ballast: 120/277 Volt dual tap primary core
and coil, high power factor, insulation class
“H” 180°C, reliable starting to -30°C. Includes
capacitor and igniter (where required)
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
Catalog Number: M9HD-EDS-100M (M952LC-W-PG)
Test Number: PR02981102
Total Luminaire Efficiency: 50.8%
Luminaire Spacing Criteria: 1.01
Lamps: One (1) Philips CDMP100/C/U, rated at 8500 lumens.
DURA-LIFE
product specifications
Candlepower
Distribution
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
132
8’ x 8’
74
10’ x 10’
48
12’ x 12’
33
Footcandles
Dist.@ Center@ Edge Dia.
6’93 278.1’
7’68 209.5’
8’ 52 1510.8’
9’ 41 1212.2’
10’34 1013.6’
11’28 8 14.9’
12’23 7 16.3’
13’20 6 17.6’
14’17 5 19.0’
15’15 4 20.3’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M9HD-EDS-100M-Q
Rough-In
M9HD-EDS M9HD-EDS
Example: M952LC-W-FG
Wattage/Lamp
Options
50M
2x50W ED17
Coated non-protected
MH, 120/277V, Magnetic
70M
2x70W ED17
Coated non-protected
MH, 120/277V, Magnetic
Color Options
Reflector
Example: SCA9-15
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
FCANFCAN Ballast in lieu of core and coil (includes HB-TL bar hangers)
M952LC
Lower Cone
M952B
Lower Baffle
Lens Type
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
Options
Accessories
WH White Flange
WET Wet Location
Listing
SCA9-*Sloped Ceiling Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA9-20
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
100M
2x100W ED17
Coated non-protected
MH, 120/277V, Magnetic
150M
2x150W ED17
Coated non-protected
MH, 120/277V, Magnetic
† Consult Factory for Availability
55
12” bt/ed28 horizontal dura-life cmh lenslite for 2 lamps
enclosed aperture, magnetic ballast
20"
10 1/4"
25"
11 1/4" Dia.
Open
12 1/4" Dia.
Ceiling Cutout
product specifications
photometric data
Lower Cone: Regressed aluminum cone
• White painted or low iridescent Alzak®
cone • Alzak® cone can be clear, gold,
wheat, pewter or bronze, in specular or satin
finish • Painted white flange is optional
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Lamp Holder: Mogul base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell • Socket prevents the use of metal halide
lamps that are not “open fixture” rated • 2
lamp “Dura-Life” design reduces lamp changes
and decreases restrike time by operating one
lamp at a time
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Lens: Clear glass, prismatic glass and Fresnel
glass
Ballast: 120/277 Volt dual tap primary core
and coil, high power factor, insulation class
“H” 180°C, reliable starting to -30°C. Includes
capacitor and igniter (where required)
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
Catalog Number: M12HD-EDS-250M (M1252LC-W-PG)
Test Number: PR12000899
Total Luminaire Efficiency: 49.4%
Luminaire Spacing Criteria: 1.23
Lamps: One Venture MH250W/C/U, rated at 20,000 lumens.
Candlepower
Distribution
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
10’ x 10’
106
12’ x 12’
74
16’ x 16’
41
20’ x 20’
27
24’ x 24’
18
Footcandles
Dist.@ Center@ Edge Dia.
6’136 2611.5’
7’100 1913.4’
8’ 77 1415.3’
9’ 60 1117.3’
10’49 9 19.2’
11’40 8 21.1’
12’34 6 23.0’
13’29 6 24.9’
14’25 5 26.8’
15’22 4 28.8’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M12HD-EDS-250M
Rough-In
M12HD-EDS M12HD-EDS
56
Options
Color Options
Reflector
175M
2x175W BT/ED28
Coated non-protected
MH, 120/277, Magnetic
250M
2x250W BT/ED28
Coated non-protected
MH, 120/277V, Magnetic
Example: SCA12-15
Example: M1252LC-W-FG
Wattage/Lamp
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
CP Chicago Plenum
Q
Quartz restrike with hot start auxiliary control
(Must specify Q option
for reflector)
QS Quartz socket only with leads
(Must specify Q
for reflector)
M1252LC
Lower Cone
M1252B
Lower Baffle
Lens Type
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
Options
Accessories
WH White Flange
WET Wet Location
Listing
SCA12-*Sloped Ceiling
Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA12-15
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
9” ED17 dura-life cmh lenslite cylinder for 2 lamps
enclosed aperture, magnetic ballast
3 1/8"
18 1/2"
18 1/2"
6 5/8"
7 3/8" Dia.
Open
7 3/8" Dia.
Open
7 3/8" Dia.
Open
9"
Surface Mount
9"
Pendant Mount
9"
Wall Mount
photometric data
Lower Cone: Regressed aluminum cone •
Low iridescent specular or satin Alzak® cone
in clear, gold, wheat, pewter, bronze or
painted white; other finishes available upon
request
Catalog Number: 9H2-EDS100MW-W-PG
Test Number: PR02981102
Total Luminaire Efficiency: 50.8%
Luminaire Spacing Criteria: 1.01
Lamps: One Philips CDMP100/C/U, rated at 8500 lumens.
DURA-LIFE
product specifications
Baffle: White or black painted deep multigroove aluminum baffle insert
17 1/2"
8 3/4"
Candlepower
Distribution
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Lens: Prismatic glass or Fresnel glass
Ballast: 120/277 Volt dual tap primary core
and coil, high power factor, insulation class
“H” 180°C, reliable starting to -30°C. Includes
capacitor and igniter (where required)
Housing: One piece heavy gauge aluminum
with white or black baked textured powder
coat finish
Mounting: Available for surface, pendant or
wall mounting • Pendant mounting features
hang straight pendant mounting kits that
allows for mounting on to sloped ceiling with
an angle up to 45° • Hinged reveal allows
single person installation
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
132
8’ x 8’
74
10’ x 10’
48
12’ x 12’
33
Footcandles
Dist.@ Center@ Edge Dia.
6’93 278.1’
7’68 209.5’
8’ 52 1510.1’
9’ 41 1212.2’
10’34 1013.6’
11’28 8 14.9’
12’23 7 16.3’
13’20 6 17.6’
14’17 5 19.0’
15’15 4 20.3’
ORDERING INFORMATION: Rough-in and accessories ordered separately.
Example: 9HP2-EDS100MW-W-PG
9H2
Surface Mount
9HP2
Pendant
Mount
9HB2
Wall Mount
EDS50MW1
2x50W ED17 Coated Non-protected MH,
120/277V Magnetic, White
EDS70MW1
2x70W ED17 Coated Non-protected MH,
120/277V Magnetic, White
EDS100MW1
2x100W ED17 Coated Non-protected
MH, 120/277V Magnetic, White
EDS150MW1
2x150W ED17 Coated Non-protected
MH, 120/277V Magnetic, White
Replace “W” with “B” for Black
1
Example: P18-W
Cone Color/Finish
Wattage/Lamp
Rough-In
Lens Type
C
CS
GL
GS
BB
W
WB
Clear Alzak® Specular
Clear Alzak® Satin
Gold Alzak® Specular
Gold Alzak® Satin
Black Baffle
White Painted
White Baffle
Options
Accessories
PG Prismatic Glass
FG Fresnel Lens (Lens is
required)
3
347 Volt
***F Fuse and Fuse
Holder
(Where***=voltage)
P18-W 18” Hang Straight Pendant Mounting
Kit, White
P18-B 18” Hang Straight Pendant Mounting
Kit, Black
P24-W 24” Hang Straight Pendant Mounting
Kit, White
P24-B 24” Hang Straight Pendant Mounting
Kit, Black
P36-W 36” Hang Straight Pendant Mounting
Kit, White
P36-B 36” Hang Straight Pendant Mounting
Kit, Black
(45° max ceiling slope for all pendant kits)
57
CMH
Downlight
Fixtures
The Indy CMH product line offers an extensive array of
Indy CMH Downlight features:
downlighting options designed for optimum performance in
• Ceramic metal halide lamps save energy and reduce
the commercial lighting environment. In addition to the energy
efficiency and extended service life offered by ceramic metal
halide, these downlight fixtures are loaded with exceptional
features.
The reflectors for Indy CMH downlights are computer
designed to achieve the ideal balance between brightness
control, optical efficiency and aesthetics using our Cascading
Vector™ reflector design. With this approach, outbound
light vectors gradually increase in aim angle as the reflector
contours upward, eliminating the lamp image and allowing for
manufacturing tolerances and production variables. They are
made from the highest quality materials and are available in a
range of elegant colors and finishes. The trim flanges are builtin and fit securely against the ceiling.
relamping costs.
• Cascading Vector™ reflector design offers low
brightness, high efficiency.
• Wide range of reflector colors and finishes with matching
built-in ceiling flange.
• Low iridescent finishes eliminate “rainbowing.”
• Interchangeable locked optics for T-lamps use optional
reflectors to provide beam spread flexibility.
• Proprietary, self-centering Tru-Lock bar hanger system for
suspended ceilings saves time; cuts installation costs.
• Universal mounting brackets accommodate Tru-Lock and
industry standard linear bars, 1/2” EMT, and 3/4” and
1-1/2” C-channels.
• High power factor 120/277 universal voltage electronic or
dual-tap magnetic ballasts.
T-lamp equipped downlights come with interchangeable
• Oversized junction boxes for ease of wiring.
locked optics, a unique feature that combines the advantage
• UL/C-UL Listed.
of locked-in lighting patterns with the ability to change them
• A host of options and accessories enhances both
when necessary using interchangeable reflectors. And the
functionality and versatility.
proprietary Tru-Lock bar hanger system makes installation easy,
fast and economical.
Visit our website for more information, junolightinggroup.com
59
4” T4 vertical cmh downlight
Open aperture, electronic ballast
15"
9 3/16"
15 1/4"
4 3/8" Dia.
Open
4 7/8" Dia.
Ceiling Cutout
product specifications
open reflector (spot)
open reflector (narrow flood)
open reflector (flood)
Upper Reflector: Faceted, specular
Alzak® reflector available in spot,
narrow flood and flood beam
distributions
Lower Cone: Low iridescent specular or
satin Alzak® .050” thick angle cut cone
in clear, gold, wheat, pewter or bronze
with integral flange of same finish;
other finishes available upon request •
Painted white flange is optional
Ballast: T4/T4.5 and T4 Mini –
Universal 120/277 volt electronic solid
state, high power factor and reliable
starting to -30°C • BT5 – 120 volt
electronic solid state, high power factor
and reliable starting to -20°C
Lamp Holder: T4/T4.5 – G8.5 bi-pin
socket base with recessed female
contacts • 1A, 750V, rated for 5KV
pulse • T4 Mini – Twist and lock GU6.5
base; 2A, 250V rated for 5KV pulse
• BT5 – Twist and lock PGJ5 base; 2A,
250V rated for 2.5KV pulse
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates
ceilings up to 3/4” thick; ceiling
thickness adapter accessory is available
for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and
damp locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
Catalog Number: M4-T4-39E (MT400S-CL)
Test Number: PR10070501
Total Luminaire Efficiency: 56.7%
Luminaire Spacing Criteria: 0.32
Lamps: One CDM35/TC/830, rated at 3300
lumens.
Catalog Number: M4-T4-39E (MT400N-CL)
Test Number: PR10070502
Total Luminaire Efficiency: 59.9%
Luminaire Spacing Criteria: 0.45
Lamps: One CDM35/TC/830, rated at 3300
lumens.
Catalog Number: M4-T4-39E (MT400F-CL)
Test Number: PR10070801
Total Luminaire Efficiency: 59.9%
Luminaire Spacing Criteria: 0.62
Lamps: One CDM35/TC/830, rated at 3300
lumens.
90°
85°
2000
75°
4000
Candlepower
Distribution
65°
6000
8000
55°
10000
45°
12000
14000
35°
16000
18000
0°
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
59
8’ x 8’
33
10’ x 10’ 21
12’ x 12’ 15
25°
(Candelas)
Angle Candela
0° 13092
5° 9788
15° 2472
25° 348
35°
82
45°
24
55°
0
65°
0
75°
0
85°
0
75°
2000
65°
3000
4000
55°
5000
45°
6000
7000
35°
8000
9000
0°
Beam Spread: 16°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 3641841.7’
7’ 2671352.0’
8’ 2051032.3’
9’ 162822.5’
10’131662.8’
11’108553.1’
12’ 91 463.4’
13’ 78 393.7’
14’ 67 343.9’
15’ 58 294.2’
90°
85°
1000
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
62
8’ x 8’
46
10’ x 10’ 28
12’ x 12’ 16
25°
Candlepower
Distribution
(Candelas)
Angle Candela
0° 7733
5° 7129
15° 3215
25° 639
35°
97
45°
26
55°
5
65°
3
75°
0
85°
0
Beam Spread: 26°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 2151032.8’
7’ 158763.2’
8’ 121583.7’
9’ 96 464.2’
10’ 77 374.6’
11’ 64 315.1’
12’ 54 265.6’
13’ 46 226.0’
14’ 40 196.5’
15’ 34 177.0’
90°
85°
500
75°
1000
65°
1500
2000
55°
2500
45°
3000
3500
35°
4000
4500
0°
5°
15°
25°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
61
8’ x 8’
35
10’ x 10’ 22
12’ x 12’ 15
Candlepower
Distribution
(Candelas)
Angle Candela
0° 4286
5° 4198
15° 3100
25° 1131
35° 199
45°
54
55°
6
65°
3
75°
0
85°
0
Beam Spread: 39°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 119514.2’
7’ 88 385.0’
8’ 67 295.7’
9’ 53 236.4’
10’ 43 187.1’
11’ 35 157.8’
12’ 30 138.5’
13’ 25 119.2’
14’22 99.9’
15’ 19 810.6’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M4-T4M-20E
M4-T4
T4/T4.5
MH Lamp
G8.5 base
M4-TM1
T4 Mini MH
Lamp
GU6.5
base
M4-BT2
BT5 MH
Lamp
PGJ5 base
60
Example: MT400S-CL
Wattage/Lamp
Rough-In
Options
20E
(T4 Mini, T4/T4.5)
20W 120/277V Electronic
20E1
(BT5 only)
20W 120V Electronic
39E
(T4/T4.5 only)
39W 120/277V Electronic
70E
(T4/T4.5 only)
70W 120/277V Electronic
Color Options
Reflector
Example: HB-TL
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MT400S
Open
Reflector,
Spot Beam
MT400N
Open
Reflector,
Narrow Flood
Beam
Options
Finish
Accessories
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
MT400F
Open
Reflector,
Flood Beam
† Consult Factory for Availability
1
GE SuperMini T4
2
Philips Mini MasterColor® CDM-Tm
25” Tru-Lock grid ceiling bar
hangers, Pair
HB-52
52” C-Channel Bar Hangers, Pair
HB-28
28” C-Channel Bar Hangers, Pair
LB-27
27” Linear Bar Hangers, Pair
SCA4-* Sloped Ceiling Adapter
*Angle must be specified when ordering;
Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚
Example: SCA4-20
HB-TL
6” T4 vertical cmh downlight
Open aperture, electronic ballast
11 11/16"
10 5/8"
13 1/2"
6" Dia. Open
6 7/8" Dia.
Ceiling Cutout
product specifications
open reflector (spot)
open reflector (narrow flood)
open reflector (flood)
Upper Reflector: Faceted, specular
Alzak® reflector available in spot, narrow
flood and flood beam distributions
Lower Cone: Low iridescent specular or
satin Alzak® .050” thick angle cut cone
in clear, gold, wheat, pewter or bronze
with integral flange of same finish; other
finishes available upon request • Painted
white flange is optional
Ballast: T4/T4.5 and T4 Mini – Universal
120/277 volt electronic solid state, high
power factor and reliable starting to -30°C
• BT5 – 120 volt electronic solid state,
high power factor and reliable starting to
-20°C
Lamp Holder: T4/T4.5 – G8.5 bi-pin
socket base with recessed female contacts
• 1A, 750V, rated for 5KV pulse • T4
Mini – Twist and lock GU6.5 base; 2A,
250V rated for 5KV pulse • BT5 – Twist
and lock PGJ5 base; 2A, 250V rated for
2.5KV pulse
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates
ceilings up to 3/4” thick; ceiling thickness
adapter accessory is available for ceilings
up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
Catalog Number: M6-T4-39E (MT600S-CL)
Test Number: PR09071302
Total Luminaire Efficiency: 62.6%
Luminaire Spacing Criteria: 0.34
Lamps: One CDM35/TC/830, rated at 3300
lumens.
Catalog Number: M6-T4-39E (MT600N-CL)
Test Number: PR09071403
Total Luminaire Efficiency: 65.7%
Luminaire Spacing Criteria: 0.57
Lamps: One CDM35/TC/830, rated at 3300
lumens.
Catalog Number: M6-T4-39E (MT600F-CL)
Test Number: PR09071401
Total Luminaire Efficiency: 62.1%
Luminaire Spacing Criteria: 0.64
Lamps: One CDM35/TC/830, rated at 3300
lumens.
90°
85°
2000
75°
4000
Candlepower
Distribution
65°
6000
8000
55°
10000
45°
12000
14000
18000
0°
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
65
8’ x 8’
37
10’ x 10’ 23
12’ x 12’ 16
25°
2000
65°
3000
4000
55°
5000
45°
6000
7000
35°
8000
9000
Beam Spread: 17°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 3541791.8’
7’ 2601312.1’
8’ 1991012.4’
9’ 157792.7’
10’128643.0’
11’105533.3’
12’ 89 453.6’
13’ 75 383.9’
14’ 65 334.2’
15’ 57 294.4’
75°
0°
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
68
8’ x 8’
38
10’ x 10’ 24
12’ x 12’ 17
Candlepower
Distribution
(Candelas)
Angle Candela
0° 5749
5° 5489
15° 3436
25° 1165
35° 153
45°
41
55°
3
65°
0
75°
1
85°
0
Beam Spread: 33°
25°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 160723.6’
7’ 117534.2’
8’ 10 414.8’
9’ 71 325.4’
10’ 58 266.0’
11’ 48 226.7’
12’ 40 187.3’
13’ 34 157.9’
14’ 29 138.5’
15’ 26 129.1’
90°
85°
500
75°
1000
65°
1500
2000
55°
2500
45°
3000
3500
35°
4000
4500
0°
5°
15°
25°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
63
8’ x 8’
36
10’ x 10’ 23
12’ x 12’ 16
Candlepower
Distribution
(Candelas)
Angle Candela
0° 3696
5° 3329
15° 2396
25° 1355
35° 506
45° 130
55°
5
65°
3
75°
0
85°
0
Beam Spread: 40°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 103434.4’
7’ 75 325.1’
8’ 58 245.8’
9’ 46 196.6’
10’ 37 167.3’
11’ 31 138.0’
12’ 26 118.8’
13’22 99.5’
14’ 19 810.2’
15’ 16 711.0’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6-T4M-20E
M6-T4
T4/T4.5
MH Lamp
G8.5 base
M6-TM1
T4 Mini MH
Lamp
GU6.5
base
M6-BT2
BT5 MH
Lamp
PGJ5 base
Example: MT600N-CL
Wattage/Lamp
Rough-In
Options
20E
(T4 Mini, T4/T4.5)
20W 120/277V Electronic
20E1
(BT5 only)
20W 120V Electronic
39E
(T4/T4.5 only)
39W 120/277V Electronic
70E
(T4/T4.5 only)
70W 120/277V Electronic
† Consult Factory for Availability
1
GE SuperMini T4
2
Philips Mini MasterColor® CDM-Tm
Color Options
Reflector
Example: HB-TL
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MT600S
Open
Reflector,
Spot Beam
MT600N
Open
Reflector,
Narrow Flood
Beam
Options
Finish
Accessories
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
25” Tru-Lock grid ceiling bar
hangers, Pair
HB-52
52” C-Channel Bar Hangers, Pair
HB-28
28” C-Channel Bar Hangers, Pair
LB-27
27” Linear Bar Hangers, Pair
SCA6-* Sloped Ceiling Adapter
*Angle must be specified when ordering;
Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚
Example: SCA6-20
HB-TL
MT600F
Open
Reflector,
Flood Beam
61
DOWNLIGHTS
35°
16000
(Candelas)
Angle Candela
0° 12745
5° 9785
15° 2831
25° 536
35°
87
45°
36
55°
0
65°
0
75°
0
85°
0
90°
85°
1000
4” t6 vertical cmh downlight
Open aperture, electronic ballast
15"
9 3/16"
15 1/4"
4 3/8" Dia.
Open
4 7/8" Dia.
Ceiling Cutout
product specifications
open reflector (spot)
open reflector (narrow flood)
open reflector (flood)
Upper Reflector: Faceted, specular
Alzak® reflector available in spot,
narrow flood and flood distributions
Lower Cone: Low iridescent specular
or satin Alzak® .050” thick angle cut
cone in clear, gold, wheat, pewter or
bronze with integral flange of same
finish; other finishes available upon
request • Painted white flange is
optional
Ballast: Universal 120/277 volt
electronic solid state, high power
factor and reliable starting to -30°C
Lamp Holder: G12 socket base with
heavy duty recessed female contacts
• 660W, 600V rated for 5KV pulse
Housing: Heavy gauge steel with
black baked enamel finish
Mounting Frame: Accommodates
ceilings up to 3/4” thick; ceiling
thickness adapter accessory is
available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and
damp locations • I.B.E.W. Union
made
Product specifications subject to
change without notice.
Catalog Number: M4-T6-70E (MT400S-CL)
Test Number: PR10071103
Total Luminaire Efficiency: 55.2%
Luminaire Spacing Criteria: 0.34
Lamps: One CDM70/T6/830, rated at 6600
lumens.
Catalog Number: M4-T6-70E (MT400N-CL)
Test Number: PR10071201
Total Luminaire Efficiency: 57.2%
Luminaire Spacing Criteria: 0.49
Lamps: One CDM70/T6/830, rated at 6600
lumens.
Catalog Number: M4-T6-70E (MT400F-CL)
Test Number: PR10071102
Total Luminaire Efficiency: 57.8%
Luminaire Spacing Criteria: 0.65
Lamps: One CDM70/T6/830, rated at 6600
lumens.
90°
85°
2500
75°
5000
Candlepower
Distribution
65°
7500
10000
55°
12500
45°
15000
17500
35°
20000
22500
0°
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
114
8’ x 8’
64
10’ x 10’ 41
12’ x 12’ 28
25°
(Candelas)
Angle Candela
0° 22288
5° 17237
15° 5051
25° 818
35° 174
45°
78
55°
13
65°
5
75°
0
85°
0
75°
4000
65°
6000
8000
55°
10000
45°
12000
14000
35°
16000
18000
Beam Spread: 17°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 6193141.8’
7’ 4552302.1’
8’ 3481762.4’
9’ 2751392.7’
10’ 2231133.1’
11’184933.4’
12’155783.7’
13’132674.0’
14’114584.3’
15’ 99 504.6’
90°
85°
2000
0°
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
117
8’ x 8’
66
10’ x 10’ 42
12’ x 12’ 29
Candlepower
Distribution
(Candelas)
Angle Candela
0° 12749
5° 12252
15° 6087
25° 1389
35° 241
45°
79
55°
17
65°
5
75°
4
85°
0
Beam Spread: 28°
25°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 3541703.0’
7’ 2601253.5’
8’ 199964.0’
9’ 157764.5’
10’128615.0’
11’105515.5’
12’ 89 436.0’
13’ 75 366.5’
14’ 65 317.0’
15’ 57 277.5’
90°
85°
1000
75°
2000
65°
3000
4000
55°
5000
45°
6000
7000
35°
8000
9000
0°
5°
15°
25°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
119
8’ x 8’
67
10’ x 10’ 43
12’ x 12’ 30
Candlepower
Distribution
(Candelas)
Angle Candela
0° 7482
5° 7492
15° 5761
25° 2322
35° 445
45° 100
55°
29
65°
8
75°
2
85°
0
Beam Spread: 41°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 208894.5’
7’ 153665.2’
8’ 117505.9’
9’ 92 406.7’
10’ 75 327.4’
11’ 62 278.2’
12’ 52 228.6’
13’ 44 199.7’
14’ 38 1610.4’
15’ 33 1411.2’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M4-T6-70E
M4-T6
M4-T6
T6 MH
Lamp
Example: MT400N-CL
Wattage/Lamp
Rough-In
-
Options
39E
39W T6 MH, 120/277V
Electronic
70E
70W T6 MH 120/277V
Electronic
Color Options
Reflector
Example: HB-TL
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MT400S
Open
Reflector,
Spot Beam
MT400N
Open
Reflector,
Narrow Flood
Beam
Options
Finish
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
MT400F
Open
Reflector,
Flood Beam
62
Accessories
-
† Consult Factory for Availability
25” Tru-Lock grid ceiling bar
hangers, Pair
HB-52
52” C-Channel Bar Hangers, Pair
HB-28
28” C-Channel Bar Hangers, Pair
LB-27
27” Linear Bar Hangers, Pair
SCA4-* Sloped Ceiling Adapter
*Angle must be specified when ordering;
Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚
Example: SCA4-20
HB-TL
6” t6 vertical cmh downlight
Open aperture, electronic ballast
13 1/2" 39/70W
11 11/16"
10 5/8"
16" 150W
6" Dia. Open
6 7/8" Dia.
Ceiling Cutout
product specifications
open reflector (spot)
open reflector (narrow flood)
open reflector (flood)
Upper Reflector: Faceted, specular
Alzak® reflector available in spot,
narrow flood and flood beam
distributions
Lower Cone: Low iridescent
specular or satin Alzak® .050”
thick angle cut cone in clear, gold,
wheat, pewter or bronze with
integral flange of same finish; other
finishes available upon request
• Painted white flange is optional
Ballast: Universal 120/277 volt
electronic solid state, high power
factor and reliable starting to -30°C
Lamp Holder: G12 socket base
with heavy duty recessed female
contacts • 660W, 600V rated for
5KV pulse
Housing: Heavy gauge steel with
black baked enamel finish
Mounting Frame: Accommodates
ceilings up to 3/4” thick; ceiling
thickness adapter accessory is
available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and
damp locations • I.B.E.W. Union
made
Product specifications subject to
change without notice.
Catalog Number: M6-T6-70E (MT600S-CL)
Test Number: PR09072102
Total Luminaire Efficiency: 62.1%
Luminaire Spacing Criteria: 0.33
Lamps: One CDM70/T6/830, rated at 6600
lumens.
Catalog Number: M6-T6-70E (MT600N-CL)
Test Number: PR09072101
Total Luminaire Efficiency: 65.4%
Luminaire Spacing Criteria: 0.51
Lamps: One CDM70/T6/830, rated at 6600
lumens.
Catalog Number: M6-T6-70E (MT600F-CL)
Test Number: PR09072104
Total Luminaire Efficiency: 61.0%
Luminaire Spacing Criteria: 0.65
Lamps: One CDM70/T6/830, rated at 6600
lumens.
90°
85°
5000
75°
10000
Candlepower
Distribution
65°
15000
20000
55°
25000
45°
30000
35000
45000
0°
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
128
8’ x 8’
72
10’ x 10’ 46
12’ x 12’ 32
25°
4000
65°
6000
8000
55°
10000
45°
12000
14000
35°
16000
18000
Beam Spread: 16°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 713.4361.3 1.7’
7’ 524.2265.5 2.0’
8’ 401.3203.2 2.3’
9’ 317.1160.6 2.6’
10’ 256.8130.1 2.9’
11’ 212.3107.5 3.2’
12’ 178.490.3 3.5’
13’ 152.077.0 3.7’
14’ 131.066.4 4.0’
15’ 114.157.8 4.3’
75°
0°
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
136
8’ x 8’
76
10’ x 10’ 49
12’ x 12’ 34
Candlepower
Distribution
(Candelas)
Angle Candela
0° 13467
5° 12827
15° 6905
25° 2037
35° 215
45°
70
55°
4
65°
0
75°
0
85°
0
Beam Spread: 29°
25°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 374.1177.8 3.2’
7’ 274.8130.7 3.7’
8’ 210.4100.0 4.2’
9’ 166.379.0 4.7’
10’ 134.764.0 5.3’
11’ 111.352.9 5.8’
12’ 93.544.56.3’
13’ 79.737.96.8’
14’ 68.732.77.4’
15’ 59.928.57.9’
90°
85°
1000
75°
2000
65°
3000
4000
55°
5000
45°
6000
7000
35°
8000
9000
0°
5°
15°
25°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
125
8’ x 8’
70
10’ x 10’ 45
12’ x 12’ 31
Candlepower
Distribution
(Candelas)
Angle Candela
0° 7188
5° 6753
15° 4803
25° 2641
35° 948
45° 235
55°
7
65°
7
75°
3
85°
3
Beam Spread: 40°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 199.786.5 4.3’
7’ 146.763.5 5.0’
8’ 112.348.6 5.8’
9’ 88.738.46.5’
10’ 71.931.17.2’
11’ 59.425.77.9’
12’ 49.921.68.6’
13’ 42.518.49.4’
14’ 36.7 15.910.1’
15’ 31.9 13.810.8’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6-T6M-39E
M6-T6
Example: MT600F-CL
Wattage/Lamp
Rough-In
-
M6-T6
T6 MH
Lamp
Options
39E
39W T6 MH, 120/277V
Electronic
70E
70W T6 MH 120/277V
Electronic
Example: HB-TL
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
150E2
150W T6 MH 277V Electronic
Indicates that the product meets DOE energy efficient
standards - EISA compliant.
† Consult Factory for Availability
MT600S
Open
Reflector,
Spot Beam
MT600N
Open
Reflector,
Narrow Flood
Beam
Options
Finish
-
150E1
E
150W T6 MH 120V Electronic
E
Color Options
Reflector
Accessories
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
25” Tru-Lock grid ceiling bar
hangers, Pair
HB-52
52” C-Channel Bar Hangers, Pair
HB-28
28” C-Channel Bar Hangers, Pair
LB-27
27” Linear Bar Hangers, Pair
SCA6-* Sloped Ceiling Adapter
*Angle must be specified when ordering;
Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚
Example: SCA6-20
HB-TL
MT600F
Open
Reflector,
Flood Beam
E
63
DOWNLIGHTS
35°
40000
(Candelas)
Angle Candela
0° 25683
5° 18880
15° 5914
25° 1005
35° 143
45°
78
55°
3
65°
0
75°
0
85°
0
90°
85°
2000
8” t6 vertical cmh downlight
Open aperture, electronic ballast
15 1/4"
15"
10 5/8"
18 3/4" 150W
7 3/8" Dia. Open
8 1/8" Dia.
Ceiling Cutout
product specifications
open reflector (spot)
open reflector (narrow flood)
open reflector (flood)
Upper Reflector: Faceted, specular
Alzak® reflector available in spot,
narrow flood and flood beam
distributions
Lower Cone: Low iridescent
specular or satin Alzak® .050”
thick angle cut cone in clear, gold,
wheat, pewter or bronze with
integral flange of same finish; other
finishes available upon request
• Painted white flange is optional
Ballast: Universal 120/277 volt
electronic solid state, high power
factor and reliable starting to -30°C
Lamp Holder: G12 socket base
with heavy duty recessed female
contacts • 660W, 600V rated for
5KV pulse
Housing: Heavy gauge steel with
black baked enamel finish
Mounting Frame: Accommodates
ceilings up to 3/4” thick; ceiling
thickness adapter accessory is
available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and
damp locations • I.B.E.W. Union
made
Product specifications subject to
change without notice.
Catalog Number: M8-T6-70E (MT800S-CL)
Test Number: PR10070201
Total Luminaire Efficiency: 60.1%
Luminaire Spacing Criteria: 0.33
Lamps: One CDM70/T6/830, rated at 6600
lumens.
Catalog Number: M8-T6-70E (MT800N-CL)
Test Number: PR10070102
Total Luminaire Efficiency: 63.3%
Luminaire Spacing Criteria: 0.44
Lamps: One CDM70/T6/830, rated at 6600
lumens.
Catalog Number: M8-T6-70E (MT800F-CL)
Test Number: PR09072104
Total Luminaire Efficiency: 60.0%
Luminaire Spacing Criteria: 0.64
Lamps: One CDM70/T6/830, rated at 6600
lumens.
90°
85°
5000
75°
10000
Candlepower
Distribution
65°
15000
20000
55°
25000
45°
30000
35000
35°
40000
45000
0°
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
125
8’ x 8’
70
10’ x 10’ 45
12’ x 12’ 31
25°
(Candelas)
Angle Candela
0° 24443
5° 17690
15° 5770
25° 1130
35° 159
45°
26
55°
0
65°
0
75°
0
85°
0
75°
4000
65°
6000
8000
55°
10000
45°
12000
14000
35°
16000
18000
Beam Spread: 16°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 6793451.7’
7’ 4992532.0’
8’ 3821942.3’
9’ 3021532.5’
10’ 2441242.8’
11’ 2021033.1’
12’170863.4’
13’145733.7’
14’125633.9’
15’109554.2’
90°
85°
2000
0°
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
130
8’ x 8’
73
10’ x 10’ 47
12’ x 12’ 33
Candlepower
Distribution
(Candelas)
Angle Candela
0° 16059
5° 13985
15° 6510
25° 1717
35° 278
45°
35
55°
2
65°
0
75°
0
85°
0
Beam Spread: 25°
25°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 4462182.6’
7’ 3281603.1’
8’ 2511233.5’
9’ 198973.9’
10’161794.4’
11’133654.8’
12’112555.3’
13’ 95 475.7’
14’ 82 406.1’
15’ 71 356.6’
90°
85°
1000
75°
2000
65°
3000
4000
55°
5000
45°
6000
7000
35°
8000
9000
0°
5°
15°
AVERAGE
INITIAL
FOOTCANDLES
Reflectances:
80% Ceiling,
50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
123
8’ x 8’
69
10’ x 10’ 44
12’ x 12’ 31
25°
Candlepower
Distribution
(Candelas)
Angle Candela
0° 7967
5° 6782
15° 5238
25° 2662
35° 834
45°
76
55°
6
65°
3
75°
1
85°
0
Beam Spread: 41°
Footcandles
@ @
Dist. CenterEdge Dia.
6’ 221944.5’
7’ 163695.2’
8’ 125535.9’
9’ 98 426.7’
10’ 80 347.4’
11’ 66 288.2’
12’ 55 248.9’
13’ 47 209.7’
14’ 41 1710.4’
15’ 35 1511.2’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8-T6-150E1
M8-T6
Example: MT800F-CL
Wattage/Lamp
Rough-In
-
M8-T6
T6 MH
Lamp
70E
70W T6 MH 120/277V
Electronic
E 150E1
150W T6 MH 120V Electronic
150E2
150W T6 MH 277 Electronic
Color Options
Reflector
39E
39W T6 MH, 120/277V
Electronic
E
Options
Example: HB-TL
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MT800S
Open
Reflector,
Spot Beam
MT800N
Open
Reflector,
Narrow Flood
Beam
Accessories
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
25” Tru-Lock grid ceiling bar
hangers, Pair
HB-52
52” C-Channel Bar Hangers, Pair
HB-28
28” C-Channel Bar Hangers, Pair
LB-27
27” Linear Bar Hangers, Pair
SCA8-* Sloped Ceiling Adapter
*Angle must be specified when ordering;
Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚
Example: SCA8-20
HB-TL
MT800F
Open
Reflector,
Flood Beam
Indicates that the product meets DOE energy efficient
standards - EISA compliant.
† Consult Factory for Availability
E
64
Options
Finish
4” mr16 vertical cmh downlight
Open aperture, electronic ballast
15"
7 5/8"
10 7/16"
4 1/4" Dia.
Open
4 7/8" Dia.
Ceiling Cutout
product specifications
Reflector: Precision reflector with 50˚ visual
cut-off to both lamp and lamp image • Low
iridescent specular or satin Alzak® .050”
thick reflector in clear, gold, wheat, pewter
or bronze with integral flange of same finish;
other finishes available upon request
• Painted white flange is optional
photometric data
Beam spreads plotted at 50% maximum candlepower, footcandles at 0° aiming angle. Values based on nominal conditions.
Candlepower
Distribution
Vertical Candela
Angle
90°—
0
Ballast: Universal 120/277 volt electronic
solid state, high power factor and reliable
starting to -30°C
Candlepower
Distribution
3
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
5
8
13
27
45
71
116
163
175
165
198
330
723
1995
5725
9000
Vertical Candela
Angle
90°—
1
85°—
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
1
80°—
4
80°—
8
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
16
25
35
46
57
71
91
119
157
210
315
594
1205
2038
2671
2900
Vertical Candela
Angle
90°—
2
Candlepower
Distribution
Product specifications subject to change
without notice.
85°—
5
80°—
10
75°—
70°—
65°—
60°—
55°—
50°—
45°—
40°—
35°—
30°—
25°—
20°—
15°—
10°—
5°—
0°—
18
27
36
47
61
81
104
133
176
274
484
837
1185
1403
1465
1500
Beam Spread: 12°
Lamp: CMH 20W
MR16 FL
Beam Spread: 25°
Lamp: CMH 20W
MR16 WFL
Beam Spread: 40°
Footcandles
Dist.@ Center@ Edge Dia.
6’250 1231.3’
7’184 90 1.5’
8’141 69 1.7’
9’111 55 1.9’
10’90 44 2.1’
11’74 37 2.3’
12’63 31 2.5’
13’53 26 2.7’
14’46 23 2.9’
15’40 20 3.2’
Footcandles
Dist.@ Center@ Edge Dia.
6’81 372.7’
7’59 283.1’
8’45 213.5’
9’36 174.0’
10’29 13 4.4’
11’24 11 4.9’
12’20 9 5.3’
13’17 8 5.8’
14’15 7 6.2’
15’13’ 6 6.6’
Footcandles
Dist.@ Center@ Edge Dia.
6’42 174.4’
7’31 135.1’
8’23 105.8’
9’19 8 6.6’
10’15 6 7.3’
11’12 5 8.0’
12’10 4 8.7’
13’9 4 9.5’
14’8 310.2’
15’7 310.9’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M4-MR16-20E
M4-MR16 - 20E
M4-MR16
MR16 MH
Lamp
Example: MP400-MR16-CL
Wattage/Lamp
Rough-In
20E
20W MR16 MH 120/277V
Electronic
Options
MP400-MR16
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Color Options
Reflector
MP400-MR16
Open Reflector
Example: HB-TL
Options
Finish
-
Accessories
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for white
WH White Flange
25” Tru-Lock grid ceiling bar
hangers, Pair
HB-52
52” C-Channel Bar Hangers, Pair
HB-28
28” C-Channel Bar Hangers, Pair
LB-27
27” Linear Bar Hangers, Pair
SCA4-* Sloped Ceiling Adapter
*Angle must be specified when ordering;
Available in 5˚, 10˚, 15˚, 20˚, 25˚, 30˚
Example: SCA4-20
HB-TL
HCL16
1061-R
1061-LB
1061-MB
1061-A
1061-G
1061-PGL
Hexcell Louver
Red Color Filter
Light Blue Color Filter
Medium Blue Color Filter
Amber Color Filter
Green Color Filter
Prismatic Glass Lens
1061-LSL Linear Spread Lens
† Consult Factory for Availability
65
DOWNLIGHTS
Lamp Holder: GX10 twist and lock lamp
holder provides precise positioning of lamp
for excellent optical control in luminaires;
2A, 250V rated for 5KV pulse
85°—
Lamp: CMH 20W
MR16 SP
4” par20 vertical cmh downlight
Open aperture, electronic ballast
11 1/4"
7 1/2"
9 3/4"
3 7/8" Dia.
Baffle
4 1/3" Dia.
Open
4 7/8" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (39W par20/wide flood)
OPEN BAFFLE (39W par20/wide flood)
Reflector: Cascading Vector optical design
ensures a 50° visual cut-off to both lamp and
lamp image • Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter, bronze or black with integral
flange of same finish; other finishes available
upon request • Painted white flange is optional
Catalog Number: M4-P20-39E (MP400-P20-CL)
Test Number: PT05063101
Total Luminaire Efficiency: 93.8%
Luminaire Spacing Criteria: 0.46
Lamps: One OSI HCIPAR20/39W/WFL, rated at 2000
lumens.
Catalog Number: M4-P20-39E (P400B-20-B)
Test Number: PT05063102
Total Luminaire Efficiency: 73.7%
Luminaire Spacing Criteria: 0.46
Lamps: One OSI HCIPAR20/39W/WFL, rated at 2000
lumens.
Baffle: Specular clear Alzak® upper reflector
and white or black painted deep multi-groove
aluminum baffle insert with integral flange
painted white
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell in die-cast socket housing
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below for
details), high power factor and reliable starting
to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2” •
Common rough-in section accepts open and
single wall wash reflectors
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
90ϒ
85ϒ
1000
75ϒ
2000
65ϒ
3000
4000
55ϒ
5000
45ϒ
6000
7000
0ϒ 5ϒ
15ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
58
8’ x 8’
33
10’ x 10’
21
12’ x 12’
15
35ϒ
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
1000
2000
Candlepower
Distribution
75ϒ
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
65ϒ
3000
5270
4809
2366
1020
322
77
14
0
0
0
90ϒ
85ϒ
4000
55ϒ
5000
45ϒ
6000
7000
0ϒ 5ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’146 67 2.9’
7’108 49 3.4’
8’82 383.9’
9’65 304.3’
10’53 24 4.8’
11’44 20 5.3’
12’37 17 5.8’
13’31 14 6.3’
14’27 12 6.8’
15’23 11 7.2’
15ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
46
8’ x 8’
26
10’ x 10’
17
12’ x 12’
12
35ϒ
5271
4809
2356
483
158
25
6
0
0
0
Footcandles
Dist.@ Center@ Edge Dia.
6’146 67 2.9’
7’108 49 3.4’
8’82 383.9’
9’65 304.3’
10’53 24 4.8’
11’44 20 5.3’
12’37 17 5.8’
13’31 14 6.3’
14’27 12 6.7’
15’23 11 7.2’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M4-P20-39E
M4-P20
M4-P20
66
Example: MP400-P20-CL
Wattage/Lamp
Rough-In
-
39E
39E
39W PAR20 MH,
120/277V Electronic
Options
Color Options
Reflector
-
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
†SW Lamp Sensing Switch
M400-P20
Open Reflector
P400B-P20
Baffle
Options
Accessories
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
WH White Flange
† Consult Factory for Availability
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
6” par30l/38 vertical cmh downlight
Open aperture, electronic ballast
11 11/16"
8 3/4" Baffle
8 3/8" Open
13 1/2"
5 1/2" Dia.
Baffle
6" Dia.
Open
6 7/8" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (70W par30/flood m.h.)
OPEN BAFFLE (70W par30/flood m.h.)
Reflector: Cascading Vector optical design
ensures a 50° visual cut-off to both lamp and
lamp image • Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter, bronze or black with integral
flange of same finish; other finishes available
upon request • Painted white flange is optional
Catalog Number: M6-EDS-70E (MP600-P38-CL)
Test Number: PT05062603
Total Luminaire Efficiency: 95.9%
Luminaire Spacing Criteria: 0.64
Lamps: One Philips CDM70/PAR30/M/FL, rated 4850
lumens.
Catalog Number: M6-eds-70E (p600b-p38-b)
Test Number: PT05063001
Total Luminaire Efficiency: 82.5%
Luminaire Spacing Criteria: 0.60
Lamps: One Philips CDM70/PAR30/M/FL, rated at
4850 lumens.
Baffle: Specular clear Alzak® upper reflector
and white or black painted deep multi-groove
aluminum baffle insert with integral flange
painted white
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below for
details), high power factor and reliable starting
to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2” •
Common rough-in section accepts open and
single wall wash reflectors
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
75ϒ
2000
65ϒ
3000
4000
55ϒ
5000
45ϒ
6000
7000
35ϒ
8000
9000
10000
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
5ϒ
15ϒ
65ϒ
3000
9725
8868
6553
2867
615
182
99
3
0
0
4000
55ϒ
5000
45ϒ
6000
7000
35ϒ
8000
9000
0ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
144
8’ x 8’
81
10’ x 10’
52
12’ x 12’
36
75ϒ
2000
10000
0ϒ
90ϒ
85ϒ
1000
Footcandles
Dist.@ Center@ Edge Dia.
6’270 1114.5’
7’199 82 5.2’
8’152 63 6.0’
9’120 49 6.7’
10’97 40 7.5’
11’80 33 8.2’
12’68 28 9.0’
13’58 24 9.7’
14’50 2010.5’
15’43 18 11.2
5ϒ
15ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
125
8’ x 8’
70
10’ x 10’
45
12’ x 12’
31
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
9916
8936
6298
2299
334
96
16
0
0
0
25ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’275 1164.2’
7’202 85 4.9’
8’155 65 5.6’
9’122 52 6.3’
10’99 42 7.0’
11’82 35 7.6’
12’69 29 8.3’
13’59 25 9.0’
14’51 21 9.7’
15’44 1910.4’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6-P30-39E
M6-P30
39W only
M6-EDS
70 &
100W
only
Example: MP600-P38-CL
Wattage/Lamp
Rough-In
Options
39E
39W PAR30L MH, 120/277V
Electronic
70E
70W PAR30L/PAR38 MH,
120/277V Electronic
100E
100W PAR38 MH, 120/277V
Electronic
† Consult Factory for Availability
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
†SW Lamp Sensing Switch
MP600-P38
Open
Reflector
MP600B-P38
Baffle
Options
Accessories
WH White Flange
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA6-*Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA6-20
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
(baffle only)
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
67
DOWNLIGHTS
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell in die-cast socket housing
90ϒ
85ϒ
1000
8” par30l/38 vertical cmh downlight
Open aperture, electronic ballast
13 1/16"
9 5/16"
14 13/16"
17 7/16"
(150W)
6 3/4" Dia.
Baffle
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (100W PAR38/VWFL M.H.)
OPEN BAFFLE (100W PAR38/VWFL M.H.)
Reflector: Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter, bronze or black with integral
flange of same finish; other finishes available upon request • Painted white flange is
optional
Catalog Number: M8-EDS-100E (MP800-P38-CL)
Test Number: PT05062502
Total Luminaire Efficiency: 87.6%
Luminaire Spacing Criteria: 0.94
Lamps: One OSI MCP00PAR38/U/830/VWFL, rated at
6500 lumens.
Catalog Number: M8-EDS-100E (P800B-P38-B)
Test Number: PT05062501
Total Luminaire Efficiency: 72.6%
Luminaire Spacing Criteria: 0.91
Lamps: One OSI MCP100PAR38/U/830/VWFL, rated at
6500 lumens.
Baffle: Specular clear Alzak® upper reflector and white or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell in die-cast socket housing
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
90ϒ
85ϒ
1000
75ϒ
2000
65ϒ
3000
4000
55ϒ
5000
45ϒ
6000
7000
35ϒ
8000
9000
10000
0ϒ
5ϒ
15ϒ
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
75ϒ
2000
65ϒ
3000
5575
5296
5118
4609
1905
442
34
4
0
0
4000
55ϒ
5000
45ϒ
6000
7000
35ϒ
8000
9000
10000
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
175
8’ x 8’
99
10’ x 10’
63
12’ x 12’
44
90ϒ
85ϒ
1000
0ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’155 47 7.6’
7’114 35 8.8’
8’ 87 2710.1’
9’ 69 2111.4’
10’56 1712.6’
11’46 1413.9’
12’39 1215.1’
13’33 1016.4’
14’28 9 17.7’
15’25 8 18.9’
5ϒ
15ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
146
8’ x 8’
82
10’ x 10’
53
12’ x 12’
37
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
5138
4898
4768
3612
1620
242
20
3
0
0
25ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’143 46 6.9’
7’105 34 8.1’
8’80 269.2’
9’ 63 2110.4’
10’51 1711.5’
11’43 1412.7’
12’36 1213.8’
13’30 1015.0’
14’26 9 16.1’
15’23 7 17.3’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8-P30-39E
M8-P30
39W only
M8-EDS
70, 100
& 150W
only
68
Example: P800B-P38-W
Wattage/Lamp
Rough-In
Options
39E
39W PAR30L MH, 120/277V
Electronic
70E
70W PAR30L/PAR38 MH,
120/277V Electronic
100E
100W PAR38 MH, 120/277V
Electronic
150E120
150WPAR38MH,120VElectronic
150E277
150WPAR38MH,277VElectronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
†SW Lamp Sensing Switch
M800-P38
Open Reflector
P800B-P38
Baffle
Options
Accessories
WH White Flange
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA8-*Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA8-20
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
(baffle only)
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
† Consult Factory for Availability
8” par30l/38 vertical cmh deep cone/baffle downlight
Open aperture, electronic ballast
15"
12"
15 1/4"
18 3/4" (150W)
7 1/4" Dia.
Baffle
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (100W par39/fl)
OPEN BAFFLE (100W par38/fl)
Cone: Low iridescent specular or satin
Alzak® .050” thick deep cone in clear,
gold, wheat, pewter, bronze or black with
integral flange of same finish; other finishes
available upon request • Painted white
flange is optional
Catalog Number: MD8-P38-100E (MD800-P38-CL)
Test Number: PR06000201
Total Luminaire Efficiency: 83.5%
Luminaire Spacing Criteria: 0.52
Lamps: One OSI MP100PAR38/U/FL35, rated at 5500
lumens.
Catalog Number: MD8-P38-100E (MD800B-P38-B)
Test Number: PR06000202
Total Luminaire Efficiency: 65.7%
Luminaire Spacing Criteria: 0.56
Lamps: One MP100PAR38/U/FL35, rated at 5500
lumens.
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell in die-cast socket housing
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
65ϒ
6000
8000
55ϒ
10000
45ϒ
12000
14000
35ϒ
16000
18000
Housing: Heavy gauge steel with black
baked enamel finish
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
75ϒ
4000
0ϒ 5ϒ
15ϒ
Candlepower
Distribution
2000
(Candelas)
Angle
Candela
0° 15533
5° 13791
15° 8299
25° 1677
35° 191
45°
28
55°
3
65°
1
75°
4
85°
0
4000
Candlepower
Distribution
75ϒ
(Candelas)
Angle
Candela
0° 10759
5° 10343
15° 7038
25° 1198
35° 101
45°
14
55°
4
65°
1
75°
0
85°
0
65ϒ
6000
8000
55ϒ
10000
45ϒ
12000
14000
35ϒ
16000
18000
0ϒ 5ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
144
8’ x 8’
81
10’ x 10’
52
12’ x 12’
36
90ϒ
85ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’ 431.5192.2 3.4’
7’ 317.0141.2 4.0’
8’ 242.7108.1 4.5’
9’191.885.4 5.1’
10’155.3 69.2 5.7’
11’128.4 57.2 6.2’
12’107.9 48.1 6.8’
13’91.9 40.9 7.4’
14’79.2 35.3 7.9’
15’69.0 30.8 8.5’
15ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
113
8’ x 8’
64
10’ x 10’
41
12’ x 12’
28
Footcandles
Dist.@ Center@ Edge Dia.
6’ 298.9129.9 3.8’
7’219.695.4 4.4’
8’168.173.1 5.0’
9’132.857.7 5.6’
10’107.6 46.8 6.3’
11’88.6 38.6 6.9’
12’74.7 32.5 7.5’
13’63.7 27.7 8.1’
14’54.9 23.9 8.8’
15’47.8 20.8 9.4’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: MD8-P38-100E
MD8-P30
39W only
MD8P30/38
70W only
MD8-P38
100W
& 150W
only
Example: MD800B-P38-W
Wattage/Lamp
Rough-In
Options
39E
39W PAR30L MH, 120/277V
Electronic
70E
70W PAR30L/PAR38 MH,
120/277V Electronic
100E
100W PAR38 MH, 120/277V
Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MD800-P38
Open Deep
Cone
MD800B-P38
Deep Baffle
Options
Accessories
WH White Flange
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA8-*Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA8-20
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
(baffle only)
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
150E120
150WPAR38MH,120VElectronic
150E277
150WPAR38MH,277VElectronic
† Consult Factory for Availability
69
DOWNLIGHTS
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
90ϒ
85ϒ
2000
6” ed17 vertical cmh downlight
Open aperture, electronic ballast
11 11/16"
9 1/2" Baffle
9 1/8" Open
13 1/2"
5 1/2" Dia.
Baffle
6" Dia.
Open
6 7/8" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (100W COATED ED-17)
OPEN BAFFLE (100W COATED ED-17)
Reflector: Cascading Vector optical design
ensures a 50° visual cut-off to both lamp and
lamp image • Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter or bronze with integral flange
of same finish; other finishes available upon
request • Painted white flange is optional
Catalog Number: M6-ED-100E (M600-CL)
Test Number: PR03060301
Total Luminaire Efficiency: 47.1%
Luminaire Spacing Criteria: 0.85
Lamps: One Philips CDMP100/C/U/M, rated at 8500
lumens.
Catalog Number: M6-ED-100E (M600B-B)
Test Number: PT05062301
Total Luminaire Efficiency: 30.1%
Luminaire Spacing Criteria: 0.66
Lamps: One Philips MCH100/C/U/MP/3K, rated at 8500
lumens.
Baffle: Specular clear Alzak® upper reflector
and white or black painted deep multi-groove
aluminum baffle insert with integral flange
painted white
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell in die-cast socket housing • Socket prevents the use of metal halide lamps that are not
“open fixture” rated
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below for
details), high power factor and reliable starting
to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2” •
Common rough-in section accepts open and
single wall wash reflectors
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without
notice.
90ϒ
85ϒ
500
75ϒ
1000
65ϒ
1500
2000
55ϒ
2500
45ϒ
3000
3500
35ϒ
4000
4500
0ϒ 5ϒ
15ϒ
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
75ϒ
1000
65ϒ
1500
4398
4294
3449
2665
1467
550
25
9
0
5
2000
55ϒ
2500
45ϒ
3000
3500
35ϒ
4000
4500
0ϒ 5ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
123
8’ x 8’
69
10’ x 10’
44
12’ x 12’
31
90ϒ
85ϒ
500
Footcandles
Dist.@ Center@ Edge Dia.
6’122 42 6.5’
7’90 317.6’
8’69 248.7’
9’54 199.8’
10’44 1510.9’
11’36 1312.0’
12’31 1113.0’
13’26 9 14.1’
14’22 8 15.2’
15’20 7 16.3’
15ϒ
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
3934
3327
2494
1833
877
166
8
3
0
0
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
78
8’ x 8’
44
10’ x 10’
28
12’ x 12’
19
Footcandles
Dist.@ Center@ Edge Dia.
6’109 42 5.2’
7’80 316.1’
8’62 247.0’
9’49 197.8’
10’39 15 8.7’
11’33 13 9.6’
12’27 1110.5’
13’23 9 11.3’
14’20 8 12.2’
15’18 7 13.1’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6-ED-100E-Q
M6-ED
M6-ED
70
Example: M600B-B
Options
Wattage/Lamp
Rough-In
-
50E120
50W ED17 Coated Protected
MH, 120V Electronic
50E277
50W ED17 Coated Protected
MH, 277V Electronic
70E
70W ED17 Coated Protected
MH, 120/277V Electronic
100E
100W ED17 Coated Protected
MH, 120/277V Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot
start auxiliary control
(Must specify Q option
for reflector)
QS Quartz socket only with
leads (Must specify Q
for reflector)
†SW Lamp Sensing Switch
M600
Open Reflector
M600B
Baffle
Options
Accessories
WH White Flange
Q
Hole for
quartz
restrike
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA6-*Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA6-20
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
(baffle only)
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
† Consult Factory for Availability
8” ed17 vertical cmh downlight
Open aperture, electronic ballast
13 1/16"
9 5/16"
14 13/16"
17 7/16" (150W)
6 3/4" Dia.
Baffle
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
OPEN REFLECTOR (100W COATED ED-17 M.H.)
OPEN REFLECTOR-WIDE DISTRIBUTION (100W COATED ED-17 M.H.)
OPEN BAFFLE (100W COATED ED-17)
Catalog Number: M8-ED-100E (M800-CL)
Test Number: PR03060802
Total Luminaire Efficiency: 60.0%
Luminaire Spacing Criteria: 0.97
Lamps: One Philips CDMP100/C/U/M, rated at 8500
lumens.
Catalog Number: M8-ED-100E (M800W-CL)
Test Number: PT06060201
Total Luminaire Efficiency: 63.8%
Luminaire Spacing Criteria: 1.35
Lamps: One Philips MHC100/C/U/MP/3K, rated at
8500 lumens.
Catalog Number: M8-ED-100E (M800B-B)
Test Number: PT05062403
Total Luminaire Efficiency: 44.2%
Luminaire Spacing Criteria: 0.83
Lamps: One (1) Philips MHC100/C/U/MP/3K, rated at
8500 lumens.
90ϒ
85ϒ
500
75ϒ
1000
65ϒ
1500
2000
55ϒ
2500
45ϒ
3000
35ϒ
4500
0ϒ 5ϒ
15ϒ
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
75ϒ
1000
65ϒ
1500
4606
8868
6553
2867
615
182
99
3
0
0
2000
55ϒ
2500
45ϒ
3000
3500
35ϒ
4000
4500
0ϒ 5ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
156
8’ x 8’
88
10’ x 10’
56
12’ x 12’
39
90ϒ
85ϒ
500
Footcandles
Dist.@ Center@ Edge Dia.
6’128 40 7.6’
7’94 298.8’
8’ 72 2210.1’
9’ 57 1811.3’
10’46 1412.6’
11’38 1213.9’
12’32 1015.1’
13’27 9 16.4’
14’24 7 17.6’
15’21 6 18.9’
15ϒ
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
75ϒ
1000
65ϒ
1500
2309
2365
2838
3305
2420
1307
341
15
6
0
2000
55ϒ
2500
45ϒ
3000
3500
35ϒ
4000
4500
0ϒ 5ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
165
8’ x 8’
93
10’ x 10’
60
12’ x 12’
41
90ϒ
85ϒ
500
Footcandles
Dist.@ Center@ Edge Dia.
6’ 64 2010.5’
7’ 47 1412.3’
8’ 36 1114.0’
9’29 915.8’
10’23 7 17.5’
11’19 6 19.3’
12’16 5 21.0’
13’14 4 22.8’
14’12 4 24.5’
15’10 3 26.3’
15ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
116
8’ x 8’
65
10’ x 10’
42
12’ x 12’
29
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
4674
4429
366
2725
1234
312
15
3
0
0
25ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’129.845.1 6.3’
7’95.433.27.3’
8’73.025.48.4’
9’57.720.19.4’
10’46.7 16.210.5’
11’38.6 13.411.5’
12’32.5 11.312.6’
13’27.7 9.6 13.6’
14’23.8 8.3 14.7’
15’20.8 7.2 15.7’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8-ED-100E-Q
M8-ED
M8-ED
Example: M800B-B
Wattage/Lamp
Rough-In
-
Options
50E120
50W ED17 Coated Protected
MH, 120V Electronic
50E277
50WED17CoatedProtectedMH,
277V Electronic
70E
70WED17CoatedProtectedMH,
120/277V Electronic
100E
100W ED17 Coated Protected
MH, 120/277V Electronic
150E120
150W ED17 Coated Protected
MH, 120V Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot
start auxiliary control
(Must specify Q option
for reflector)
QS Quartz socket only with
leads (Must specify Q
for reflector)
†SW Lamp Sensing Switch
M800
Open,
Narrow
Distribution
M800W
Open, Wide
Distribution
M800B
Baffle
150E277
150W ED17 Coated Protected
MH, 277V Electronic
† Consult Factory for Availability
Options
Accessories
WH White Flange
Q
Hole for
quartz
restrike
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA8-*Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA8-20
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
(baffle only)
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
71
DOWNLIGHTS
3500
4000
Candlepower
Distribution
9 ” ED 1 7 v e r t i c a l c m h d o w n l i g h t
Open aperture, electronic ballast
13 1/16"
11 1/2"
14 13/16"
17 7/16"
(150W)
7 7/8" Dia.
Baffle
8 9/16" Dia.
Open
9 1/4" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (100W coated ed-17)
OPEN BAFFLE (100W coated ed-17)
Reflector: Precision reflector with 50° visual
cut-off to both lamp and lamp image • Low
iridescent specular or satin Alzak® .050”
thick reflector in clear, gold, wheat, pewter
or bronze with integral flange of same finish;
other finishes available upon request
• Painted white flange is optional
Catalog Number: M9-ED-100E (M900-CL)
Test Number: PT06060902
Total Luminaire Efficiency: 53.7%
Luminaire Spacing Criteria: 1.12
Lamps: One (1) Philips MHC100/C/U/MP/4K, rated at
8500 lumens.
Catalog Number: M9-ED-100E (M900B-B)
Test Number: PT06060901
Total Luminaire Efficiency: 65.8%
Luminaire Spacing Criteria: 1.24
Lamps: One (1) Philips MHC100/C/U/MP/4K, rated at
8500 lumens.
Baffle: Specular clear Alzak® upper reflector and white or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell in die-cast socket housing • Socket prevents the use of metal halide lamps that are not
“open fixture” rated
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
75ϒ
1000
65ϒ
1500
2000
55ϒ
2500
45ϒ
3000
3500
35ϒ
4000
4500
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
90ϒ
85ϒ
500
0ϒ 5ϒ
15ϒ
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
75ϒ
1000
65ϒ
1500
2979
3148
3727
3894
2344
1161
54
8
3
0
2000
55ϒ
2500
45ϒ
3000
3500
35ϒ
4000
4500
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
170
8’ x 8’
96
10’ x 10’
61
12’ x 12’
43
90ϒ
85ϒ
500
0ϒ 5ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’83 289.2’
7’ 61 2010.8’
8’ 47 1612.3’
9’ 37 1213.8’
10’30 1015.4’
11’25 8 16.9’
12’21 7 18.4’
13’18 6 20.0’
14’15 5 21.5’
15’13 4 23.0’
15ϒ
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
2914
3045
3602
3407
1767
684
32
4
0
0
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
139
8’ x 8’
78
10’ x 10’
50
12’ x 12’
35
Footcandles
Dist.@ Center@ Edge Dia.
6’81 308.1’
7’60 229.5’
8’ 46 1710.9’
9’ 36 1312.2’
10’29 1113.6’
11’24 9 14.9’
12’20 7 16.3’
13’17 6 17.6’
14’15 6 19.0’
15’13 5 20.3’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M9-ED-100E-Q
M9-ED
M9-ED
72
Example: M900B-B
Options
Wattage/Lamp
Rough-In
-
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
100E
Q
Quartz restrike with hot 100W ED17 Coated
start auxiliary control Protected MH, 120/277V
(Must specify Q option Electronic
for reflector)
150E120
QS Quartz socket only with 150W ED17 Coated
leads (Must specify Q Protected MH, 120V Electronic
for reflector)
†SW Lamp Sensing 150E277
Switch
150W ED17 Coated
Protected MH, 277V Electronic
70E
70W ED17 Coated Protected
MH, 120/277V Electronic
Color Options
Reflector
Example: HB-TL
Finish
M900
Open Reflector
M900B
Baffle
Options
Accessories
WH White Flange
Q
Hole for quartz restrike
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA9- *Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA9-20
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
(baffle only)
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
† Consult Factory for Availability
10” ed17 vertical cmh downlight
Open aperture, electronic ballast
15 1/16"
14 15/16" Baffle
12 7/8" Open
16 7/8"
19 3/8" 150W
9 3/4" Dia.
Open
10 1/8" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (150W COATED ED-17)
OPEN Baffle (150W COATED ED-17)
Reflector: Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter or bronze with integral flange
of same finish; other finishes available upon
request • Painted white flange is optional
Catalog Number: M10-ED-150E120 (M1001-CL)
Test Number: PR06061201
Total Luminaire Efficiency: 68.3%
Luminaire Spacing Criteria: 1.27
Lamps: One (1) OSI MP150/C/U/MED, rated at 9000
lumens
Catalog Number: M10-ED-150E120 (M1001B-B)
Test Number: PR060601202
Total Luminaire Efficiency: 51.9%
Luminaire Spacing Criteria: 1.16
Lamps: One (1) OSI MP150/C/U/MED, rated at 9000
lumens.
Baffle: Specular clear Alzak® upper reflector and white or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
75ϒ
1000
65ϒ
1500
2000
55ϒ
2500
45ϒ
3000
3500
35ϒ
4000
4500
0ϒ 5ϒ
15ϒ
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
75ϒ
1000
65ϒ
1500
3169
3222
4188
3942
3533
761
13
0
7
0
2000
55ϒ
2500
45ϒ
3000
3500
35ϒ
4000
4500
0ϒ 5ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
10’ x 10’
68
14’ x 14’
34
18’ x 18’
21
22’ x 22’
14
90ϒ
85ϒ
500
Footcandles
Dist.@ Center@ Edge Dia.
6’ 88.0 30.110.1’
7’ 64.7 22.111.7’
8’ 49.5 16.913.4’
9’ 39.1 13.415.1’
10’31.7 10.816.8’
11’26.2 9.0 18.5’
12’22.0 7.5 20.1’
13’18.7 6.4 21.8’
14’16.2 5.5 23.5’
15’14.1 4.8 25.2’
15ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
10’ x 10’
51
14’ x 14’
26
18’ x 18’
16
22’ x 22’
11
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
2334
2720
3348
4483
1706
327
38
19
7
2
25ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’64.835.98.0’
7’47.626.49.3’
8’ 36.5 20.210.7’
9’ 28.8 16.012.0’
10’23.3 12.913.3’
11’19.3 10.714.6’
12’16.2 9.0 16.0’
13’13.8 7.7 17.3’
14’11.9 6.6 18.6’
15’10.4 5.8 20.0’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M10-ED-100E-Q
Rough-In
M10-ED M10-ED
Example: M1001B-B
Wattage/Lamp
Options
100E
100W ED17 Coated Protected
MH, 120/277V Electronic
150E120
150W ED17 Coated Protected
MH, 120V Electronic
150E277
150W ED17 Coated Protected
MH, 277V Electronic
† Consult Factory for Availability
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot
start auxiliary control
(Must specify Q option
for reflector)
QS Quartz socket only with
leads (Must specify Q
for reflector)
†SW Lamp Sensing Switch
M1001
Open
Reflector
M1001B
Baffle
Options
Accessories
WH White Flange
Q
Hole for
quartz
restrike
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA10-*Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA10-20
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
(baffle only)
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
73
DOWNLIGHTS
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell in die-cast socket housing • Socket prevents the use of metal halide lamps that are not
“open fixture” rated
90ϒ
85ϒ
500
10” ed17 or bt/ed28 vertical downlight
Open aperture, magnetic ballast
100W/150W Baffle
175W/250W Baffle
100W/150W Open
175W/250W Open
= 15"
= 16 3/16
= 12 7/8"
= 14 5/8"
19 1/4"
25"
9 1/8" Dia.
Baffle
9 3/4" Dia.
Open
10 1/8" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (250W coated bt-28 m.h.)
OPEN BAFFLE (250w coated bt-28 m.h.)
Reflector: Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter or bronze with integral flange
of same finish; other finishes available upon
request • Painted white flange is optional
Catalog Number: M10-ED-250M (M1002-CL)
Test Number: PR06060201
Total Luminaire Efficiency: 63.7%
Luminaire Spacing Criteria: 1.08
Lamps: One OSI M250/C/U, rated at 20,500 lumens.
Catalog Number: M10-ED-250M (M1002B-B)
Test Number: PR06060101
Total Luminaire Efficiency: 45.1%
Luminaire Spacing Criteria: 1.18
Lamps: One OSI M250/C/U, rated at 20,500 lumens.
Baffle: Specular clear Alzak® upper reflector and white or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Lamp Holder: Medium base (for 150W and
below) or mogul base (for 175W and above)
heavy duty 4Kv porcelain socket with nickel
plated brass screw shell in die-cast socket housing
• Socket prevents the use of metal halide lamps
that are not “open fixture” rated
Ballast: 120/277 Volt dual tap primary
core and coil, high power factor, insulation class “H” 180°C, reliable starting to
-30°C. Includes capacitor and igniter (where
required)
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
90ϒ
85ϒ
2000
75ϒ
4000
65ϒ
6000
8000
55ϒ
10000
45ϒ
12000
14000
0ϒ 5ϒ
15ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
10’ x 10’
144
12’ x 12’
100
16’ x 16’
56
20’ x 20’
36
24’ x 24’
25
35ϒ
Candlepower
Distribution
90ϒ
85ϒ
1000
(Candelas)
Angle
Candela
0° 9968
5° 10172
15° 10738
25° 8143
35° 5470
45° 2190
55° 146
65°
9
75°
0
85°
0
Candlepower
Distribution
75ϒ
2000
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
65ϒ
3000
4000
55ϒ
5000
45ϒ
6000
7000
0ϒ 5ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’277 82 8.5’
7’203 60 9.9’
8’ 156 46.111.3’
9’123 3612.7’
10’100 30 14.1’
11’82 2415.6’
12’69 2117.0’
13’59 1818.4’
14’51 1519.8’
15’43 1321.2’
15ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
10’ x 10’
103
12’ x 12’
71
16’ x 16’
40
20’ x 20’
26
24’ x 24’
18
35ϒ
5689
5998
6319
5879
4153
1454
451
25
0
0
Footcandles
Dist.@ Center@ Edge Dia.
6’158 42 9.6’
7’116 3111.2’
8’ 89 2412.8’
9’ 70 1914.4’
10’57 1516.0’
11’47 1317.6’
12’40 1119.2’
13’34 9 20.8’
14’29 8 22.4’
15’25 7 24.0’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M10-ED-175M-Q
M10-ED
M10-ED
Example: M1002B-B
Wattage/Lamp
Rough-In
-
Options
100M
100W ED17 Coated
Protected MH, 120/277V
Magnetic
150M
150W ED17 Coated
Protected MH, 120/277V
Magnetic
175M
175W BT/ED28 Coated
Protected MH, 120/277V
Magnetic
Color Options
Reflector
Example: SCA10-20
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot start auxiliary control (Must specify Q option for reflector)
QS Quartz socket only with leads (Must specify Q for reflector)
M1001
Open Reflector
(100-150W)
M1002
Open Reflector
(175-250W)
M1001B
Baffle
(100-150W)
M1002B
Baffle
(175-250W)
Options
Accessories
WH White Flange
Q
Hole for quartz restrike
SCA10-*Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA10-20
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
(baffle only)
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
250M
250W BT/ED28 Coated
74
† Consult Factory for Availability
12” ed17 vertical cmh downlight
Open aperture, electronic ballast
25"
150W
13" Baffle
14 1/2 Open
17 1/8"
18 7/8"
100W
11 3/4" Dia.
Open
12 1/8" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (150W coated ed-17)
OPEN BAFFLE (150W COATED ED-17)
Reflector: Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter or bronze with integral flange
of same finish; other finishes available upon
request • Painted white flange is optional
Catalog Number: M12-ED-150E120 (M1201-CL)
Test Number: PR06060903
Total Luminaire Efficiency: 71.9%
Luminaire Spacing Criteria: 0.93
Lamps: ONE (1) OSI M150/C/U/MED, rated at 9000
lumens.
Catalog Number: M12-ED-150E120 (M1201B-B)
Test Number: PR06060904
Total Luminaire Efficiency: 67.9%
Luminaire Spacing Criteria: 0.89
Lamps: ONE (1) OSI M150/C/U/MED, rated at 9000
lumens.
Baffle: Specular clear Alzak® upper reflector and white or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
75ϒ
2000
65ϒ
3000
4000
55ϒ
5000
45ϒ
6000
7000
35ϒ
8000
9000
10000
0ϒ
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
15ϒ
4000
55ϒ
5000
45ϒ
6000
7000
35ϒ
8000
9000
0ϒ
25ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
8’ x 8’
113
12’ x 12’
50
16’ x 16’
28
20’ x 20’
18
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
65ϒ
3000
5615
6116
8487
4608
1833
168
0
7
0
0
Candlepower
Distribution
75ϒ
2000
10000
5ϒ
90ϒ
85ϒ
1000
Footcandles
Dist.@ Center@ Edge Dia.
6’156 85 5.9’
7’15 636.9’
8’88 487.9’
9’69 388.9’
10’56 31 9.8’
11’46 2510.8’
12’39 2111.8’
13’33 1812.8’
14’29 1613.8’
15’25 1414.8’
5ϒ
15ϒ
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
8’ x 8’
105
12’ x 12’
47
16’ x 16’
26
20’ x 20’
17
6073
6671
6886
3908
1797
552
147
9
3
10
25ϒ
Footcandles
Dist.@ Center@ Edge Dia.
6’169 75 5.8’
7’124 55 6.8’
8’98 427.8’
9’75 338.8’
10’61 27 9.7’
11’50 2210.7’
12’42 1911.7’
13’36 1612.7’
14’31 1413.6’
15’27 1214.6’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M12-ED-100E-Q
Rough-In
M12-ED M12-ED
Example: M1201B-B
Wattage/Lamp
Options
100E
100W ED17 Coated Protected
MH, 120/277V Electronic
150E120
150W ED17 Coated Protected
MH, 120V Electronic
150E277
150W ED17 Coated Protected
MH, 277V Electronic
† Consult Factory for Availability
Color Options
Reflector
Example: SCA12-20
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot
start auxiliary control
(Must specify Q option
for reflector)
QS Quartz socket only with
leads (Must specify Q
for reflector)
†SW Lamp Sensing Switch
M1201
Open
Reflector
M1201B
Baffle
Options
Accessories
WH White Flange
Q
Hole for
quartz
restrike
SCA12-*Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA12-20
C Clear
GGold
WT Wheat
PT Pewter
BZ Bronze
B Black
(baffle only)
W White
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
75
DOWNLIGHTS
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell in die-cast socket housing • Socket prevents the use of metal halide lamps that are not
“open fixture” rated
90ϒ
85ϒ
1000
12” ED17 OR BT/ED28 OR ED37 VERTICAL CMH DOWNLIGHT
Open aperture, magnetic ballast
150W ED-17 Open = 14 1/2"
150W ED-17 Baffle = 13"
250W ED/BT-28 Open = 16"
250W ED/BT-28 Baffle = 13 5/8"
400W ED/BT-37 Open = 17"
400W ED/BT-37 Baffle = 15 1/8"
16"
25"
11 3/4" Dia.
Open
12 1/8" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (250W coated bt-28)
OPEN BAFFLE (250w coated bt-28 m.h.)
Reflector: Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter or bronze with integral flange
of same finish; other finishes available upon
request • Painted white flange is optional
Catalog Number: M12-ED-250M (M1202-CL)
Test Number: PR06060202
Total Luminaire Efficiency: 67.8%
Luminaire Spacing Criteria: 1.03
Lamps: One OSI M250/C/U, rated at 20,500 lumens.
Catalog Number: M12-ED-250M (M1202B-B)
Test Number: PR06060203
Total Luminaire Efficiency: 58.2%
Luminaire Spacing Criteria: 1.25
Lamps: One OSI M250/C/U, rated at 20,500 lumens.
Baffle: Specular clear Alzak® upper reflector and white or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Candlepower
Distribution
Candlepower
Distribution
(Candelas)
Angle
Candela
0° 11272
5° 11812
15° 13160
25° 9396
35° 5642
45° 1439
55°
23
65°
7
75°
0
85°
0
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
Lamp Holder: Medium base (for 150W and
below) or mogul base (for 175W and above)
heavy duty 4Kv porcelain socket with nickel
plated brass screw shell in die-cast socket housing
• Socket prevents the use of metal halide lamps
that are not “open fixture” rated
Ballast: 120/277 Volt dual tap primary
core and coil, high power factor, insulation class “H” 180°C, reliable starting to
-30°C. Includes capacitor and igniter (where
required)
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
10’ x 10’
154
12’ x 12’
107
16’ x 16’
60
20’ x 20’
38
24’ x 24’
27
Footcandles
Dist.@ Center@ Edge Dia.
6’313 1127.5’
7’230 83 8.7’
8’176 6310.0’
9’139 5011.2’
10’113 40 12.5’
11’93 3313.7’
12’78 2815.0’
13’67 2416.2’
14’58 2117.5’
15’50 1828.7’
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
10’ x 10’
129
12’ x 12’
90
16’ x 16’
50
20’ x 20’
32
24’ x 24’
22
6344
6569
6405
6419
4848
2866
1177
174
19
6
Footcandles
Dist.@ Center@ Edge Dia.
6’176 3711.1’
7’130 2712.9’
8’ 99 2114.8’
9’ 78 1616.6’
10’63 1318.5’
11’52 1120.3’
12’44 9 22.2’
13’38 8 24.0’
14’32 7 25.9’
15’28 6 27.7’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M12-ED-400M-Q
M12-ED
M12-ED
76
Example: M1204B-B-Q
Wattage/Lamp
Rough-In
-
Options
100M
100W ED17 Coated Protected
MH, 120/277V Magnetic
150M
150W ED17 Coated Protected
MH, 120/277V Magnetic
175M
175W BT/ED28 Coated
Protected MH, 120/277V
Magnetic
250M
250W BT/ED28 Coated
Protected MH, 120/277V
Magnetic
400M
400W ED37 Coated Protected
MH, 120/277V Magnetic
Color Options
Reflector
Example: SCA12-20
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot start auxiliary control (Must specify Q option for reflector)
QS Quartz socket only with leads (Must specify Q for reflector)
M1201
Open Reflector
(100-150W)
M1202
Open Reflector
(175-250W)
M1204
Open Reflector
(400W)
M1201B
Baffle
(00-150W)
M1202B
Baffle
(175-250W)
M1204B
Baffle
(400W)
Options
Accessories
WH White Flange
Q
Hole for quartz restrike
SCA12-*Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA12-20
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
†Consult Factory for Availability
1 2 ” E D 1 7 H O R I Z O N T A L C M H downlight
open aperture, electronic ballast
17 1/8"
10"
21 7/16"
11 1/2" Dia.
Open
12 1/4" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (150W coated ed-17)
Reflector: Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter or bronze with integral flange
of same finish; other finishes available upon
request • Painted white flange is optional
Catalog Number: M12H-ED-150E120 (M1250-CL)
Test Number: PR06060799
Total Luminaire Efficiency: 73.4%
Luminaire Spacing Criteria: 0.99
Lamps: One (1) MHC150/C/U/MP/3K, rated at 11,900
lumens.
Baffle: Specular clear Alzak® upper reflector
and white or black painted deep multi-groove
aluminum baffle insert with integral flange
painted white
Candlepower
Distribution
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below for
details), high power factor and reliable starting to -30°C
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell • Socket prevents the use of metal halide
lamps that are not “open fixture” rated
Mounting Frame: Accommodates ceilings up
to 3/4” thick; ceiling thickness adapter accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
12’ x 12’
67
16’ x 16’
38
20’ x 20’
24
24’ x 24’
17
7788
7608
7680
7072
3562
320
61
17
2
0
DOWNLIGHTS
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
Footcandles
Dist.@ Center@ Edge Dia.
6’216 63 8.1’
7’159 46 9.5’
8’122 3510.8’
9’96 2812.2
10’78 23 13.5
11’64 19 14.9
12’54 16 16.2
13’46 13 17.6
14’40 1218.9’
15’35 1020.3’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M12H-ED-150E120
Rough-In
M12H-ED M12H-ED
Example: M1250-CL
Wattage/Lamp
Options
150E120
150W ED17 Coated Protected
MH, 120V Electronic
150E277
150W ED17 Coated Protected
MH, 277V Electronic
Color Options
Reflector
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot
start auxiliary control
(Must specify Q option
for reflector)
QS Quartz socket only with
leads (Must specify Q
for reflector)
M1250
Open
Reflector
M1250B
Baffle
Options
Accessories
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Please go to junolightinggroup.com for 12” ED17 Horizontal CMH Downlight with Magnetic
Ballast
†Consult Factory for Availability
Example: HB-TL
Finish
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
WH White Flange
Q
Hole for
quartz
restrike
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA12-*Sloped Ceiling Adapter
*Angle must be specified when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA12-20
77
6” ED17 VERTICAL CMH LENSLITE
enclosed aperture, electronic ballast
11 11/16"
9 1/2"
13 1/2"
6" Dia.
Open
6 7/8" Dia.
Ceiling Cutout
product specifications
lenslite (100W coated ed-17 metal halide)
Lower Cone: Regressed aluminum cone
• White painted or low iridescent Alzak® cone •
Alzak® cone can be clear, gold, wheat, pewter
or bronze, in specular or satin finish • Painted
white flange is optional
Catalog Number: M6-EDS-100E (M600LC-W-FG)
Test Number: PT05062303
Total Luminaire Efficiency: 34.2%
Luminaire Spacing Criteria: 1.03
Lamps: One Philips MHC100/C/U/M/3K, rated at 9000
lumens.
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell in die-cast socket housing
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Lens: Clear glass, prismatic glass and
Fresnel glass
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
93
8’ x 8’
52
10’ x 10’
33
12’ x 12’
23
2283
2273
2186
2034
1135
327
186
116
36
8
Footcandles
Dist.@ Center@ Edge Dia.
6’63 188.4’
7’47 139.8’
8’ 36 1011.2’
9’28 8 12.6
10’23 6 14.0
11’19 5 15.4
12’16 4 16.8
13’14 4 18.2
14’12 3 19.6
15’10 3 20.9’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6-EDS-100E
M6-EDS
M6-EDS
Example: M600LC-W-FG
Wattage/Lamp
Rough-In
-
Options
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP
Chicago Plenum
50E277
50WED17CoatedNon-protected †SW Lamp Sensing Switch
MH, 277V, Electronic
50E120
50W ED17 Coated Nonprotected MH, 120V, Electronic
70E
70WED17CoatedNon-protected
MH, 120/277V, Electronic
Color Options
Reflector
Example: HB-TL
Finish
M600LC
Lower Cone
M600B
Lower Baffle
Lens Type
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
Accessories
WH White Flange
WET Wet Location
Listing
HB-TL 25” Tru-Lock grid
ceiling bar hangers, Pair
HB-52 52” C-Channel Bar
Hangers, Pair
HB-28 28” C-Channel Bar
Hangers, Pair
LB-27 27” Linear Bar
Hangers, Pair
SCA6-*Sloped Ceiling
Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA6-20
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
100E
100W ED17 Coated Nonprotected MH, 120/277V,
Electronic
78
Options
†Consult Factory for Availability
8” ED17 VERTICAL CMH LENSLITE
enclosed aperture, electronic ballast
13 1/16"
10 5/8"
14 13/16"
17 7/16"
(150W)
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
lenslite (100W coated ed-17 metal halide)
Lower Cone: Regressed aluminum cone
• White painted or low iridescent Alzak® cone •
Alzak® cone can be clear, gold, wheat, pewter
or bronze, in specular or satin finish • Painted
white flange is optional
Catalog Number: M8-EDS-100E (M800LC-W-FG)
Test Number: PT06060101
Total Luminaire Efficiency: 48.3%
Luminaire Spacing Criteria: 0.91
Lamps: One Philips MHC100/C/U/M/3K, rated at 9000
lumens.
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Candlepower
Distribution
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Lens: Clear glass, prismatic glass and
Fresnel glass
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
133
8’ x 8’
75
10’ x 10’
48
12’ x 12’
33
3880
3755
3135
3067
1034
554
325
198
96
13
DOWNLIGHTS
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell in die-cast socket housing
Footcandles
Dist.@ Center@ Edge Dia.
6’108 36 6.7’
7’79 267.8’
8’61 208.9’
9’ 48 1610.1’
10’39 1311.2’
11’32 1112.3’
12’27 9 13.4’
13’23 8 14.5’
14’20 7 15.7’
15’17 6 16.8’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8-EDS-100E-Q
Rough-In
M8-EDS M8-EDS
Example: M800LC-W-FG
Wattage/Lamp
Options
50E120
50W ED17 Coated Nonprotected MH, 120V,
Electronic
50E277
50W ED17 Coated Nonprotected MH, 277V, Electronic
70E
70W ED17 Coated Nonprotected MH, 120/277V,
Electronic
100E
100W ED17 Coated Nonprotected MH, 120/277V,
Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot start auxiliary control (Must specify Q option for reflector)
QS Quartz socket only with leads (Must specify Q for reflector)
†SW Lamp Sensing Switch
M800LC
Lower Cone
M800B
Lower Baffle
Lens Type
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
Options
Accessories
WH White Flange
Q
Hole for quartz restrike
WET Wet Location
Listing
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA8-*Sloped Ceiling
Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA8-20
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
150E120
150W ED17 Coated Nonprotected MH, 120V, Electronic
150E227
150W ED17 Coated Non†Consult Factory for Availability
protected MH, 277V, Electronic
79
10” ED17 VERTICAL CMH LENSLITE
ENCLOSED aperture, electronic ballast
15 1/16"
15"
16 7/8"
19 3/8" 150W
9 1/8" Dia.
Open
10 3/16" Dia.
Ceiling Cutout
product specifications
OPEN REFLECTOR (100W COATED ED-17 M.H.)
Lower Cone: Regressed aluminum cone
• White painted or low iridescent Alzak® cone •
Alzak® cone can be clear, gold, wheat, pewter
or bronze, in specular or satin finish • Painted
white flange is optional
Catalog Number: M10-EDS-100E (M1001LC-W-FG)
Test Number: PR23970599
Total Luminaire Efficiency: 53.8%
Luminaire Spacing Criteria: 0.85
Lamps: One OSI M100/C/U, rated at 7900 lumens.
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell in die-cast socket housing
• Socket prevents the use of metal halide lamps
that are not “open fixture” rated
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Lens: Clear glass, prismatic glass and
Fresnel glass
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
129
8’ x 8’
73
10’ x 10’
47
12’ x 12’
32
4723
4110
4468
2765
1052
438
206
83
32
10
Footcandles
Dist.@ Center@ Edge Dia.
6’131 47 6.0’
7’96 347.0’
8’74 268.1’
9’58 219.1’
10’47 1710.1’
11’39 1411.1’
12’33 1212.1’
13’28 1013.1’
14’24 9 14.1’
15’21 8 15.1’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M10-EDS-100E-Q
Rough-In
M10-EDS M10-EDS
Options
100E
100W ED17
Coated non-protected
MH, 120/277V, Electronic
150E277
150W ED17
Coated non-protected
MH, 277V, Electronic
Color Options
Reflector
-
150E120
150W ED17
Coated non-protected
MH, 120V, Electronic
80
Example: M1001LC-W-FG
Wattage/Lamp
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot start auxiliary control (Must specify Q option for reflector
QS Quartz socket only with leads (Must specify Q for reflector)
†SW Lamp Sensing Switch
M1001LC
Lower Cone
M1001B
Lower Baffle
Lens Type
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
Options
Accessories
WH White Flange
WET Wet Location
Listing
Q
Hole for quartz restrike
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA10-*Sloped Ceiling Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA10-20
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
†Consult Factory for Availability
10” ed17 OR BT/ED28 VERTICAL CMH LENSLITE
enclosed aperture, magnetic ballast
19 1/4"
16 3/16"
25"
9 1/8" Dia.
Open
10 1/8" Dia.
Ceiling Cutout
lenslite (100w coated ed-17 metal halide)
lenslite (100W coated bt-28 metal halide)
Lower Cone: Regressed aluminum cone
• White painted or low iridescent Alzak®
cone • Alzak® cone can be clear, gold,
wheat, pewter or bronze, in specular or satin
finish • Painted white flange is optional
Catalog Number: M10-EDS-100M (M1001LC-W-FG)
Test Number: PR12970599
Total Luminaire Efficiency: 53.8%
Luminaire Spacing Criteria: 0.85
Lamps: One OSI M100/C/U, rated at 7900 lumens.
Catalog Number: M10-EDS-250M (M1002LC-W-FG)
Test Number: PR11972102
Total Luminaire Efficiency: 48.1%
Luminaire Spacing Criteria: 1.01
Lamps: One OSI M250/C/U, rated at 20,500 lumens.
Candlepower
Distribution
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Lamp Holder: Medium base (for 150W and
below) or mogul base (for 175W and above)
heavy duty 4Kv porcelain socket with nickel
plated brass screw shell in die-cast socket
housing • Socket prevents the use of metal
halide lamps that are not “open fixture” rated
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Lens: Clear glass, prismatic glass and Fresnel
glass
Ballast: 120/277 Volt dual tap primary core
and coil, high power factor, insulation class
“H” 180°C, reliable starting to -30°C. Includes
capacitor and igniter (where required)
Mounting Frame: Accommodates ceilings up
to 3/4” thick; ceiling thickness adapter accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
129
8’ x 8’
73
10’ x 10’
47
12’ x 12’
32
4723
4110
4468
2765
1052
438
206
83
32
10
Footcandles
Dist.@ Center@ Edge Dia.
6’131 47 6.0’
7’96 347.0’
8’74 268.1’
9’58 219.1’
10’47 1710.1’
11’39 1411.1’
12’33 1212.1’
13’28 1013.1’
14’24 9 14.1’
15’21 8 15.1’
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
10’ x 10’
109
12’ x 12’
75
16’ x 16’
42
20’ x 20’
27
24’ x 24’
19
7670
7239
6339
5678
3663
1688
730
299
137
35
Footcandles
Dist.@ Center@ Edge Dia.
6’213 60 8.2’
7’157 44 9.5’
8’120 3410.9’
9’ 95 2712.3’
10’77 2213.6’
11’63 1815.0’
12’53 1516.4’
13’45 1317.7’
14’39 1119.1’
15’34 1020.5’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M10-EDS-175M-Q
Rough-In
M10-EDS M10-EDS
Options
150M
150W ED17
Coated non-protected
MH, 120/277V, Magnetic
175M
175W BT/ED28
Coated non-protected
MH, 120/277V, Magnetic
Color Options
Reflector
100M
100W ED17
Coated non-protected
MH, 120/277V, Magnetic
Example: SCA10-20
Example: M1002LC-W-FG
Wattage/Lamp
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot start auxiliary control (Must specify Q option for reflector)
QS Quartz socket only with leads (Must specify Q for reflector)
M1001LC
Lower Cone
(100-150W)
M1002LC
Lower Cone
(175-250W)
M1001B
Lower Baffle
(100-150W)
M1002B
Lower Baffle
(175-250W)
Lens Type
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
only
Options
Accessories
WH White Flange
WET Wet Location
Listing
Q
Hole for quartz restrike
SCA10-*Sloped Ceiling
Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA10-20
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
250M
250W BT/ED28
Coated non-protected
MH, 120/277V, Magnetic
†Consult Factory for Availability
81
DOWNLIGHTS
product specifications
12” ED17 VERTICAL CMH LENSLITE
ENCLOSED aperture, electronic ballast
25"
150W
13"
17 1/8"
18 7/8"
100W
11 1/4" Dia.
Open
12 1/8" Dia.
Ceiling Cutout
product specifications
lenslite (100W COATED ED-17 M.H.)
Lower Cone: Regressed aluminum cone
• White painted or low iridescent Alzak® cone •
Alzak® cone can be clear, gold, wheat, pewter
or bronze, in specular or satin finish • Painted
white flange is optional
Catalog Number: M12-EDS-100E (M1201LC-W-FG)
Test Number: PR12970499
Total Luminaire Efficiency: 58.0%
Luminaire Spacing Criteria: 0.65
Lamps: One OSI M100/C/U, rated at 7900 lumens.
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell in die-cast socket housing
• Socket prevents the use of metal halide lamps
that are not “open fixture” rated
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Lens: Clear glass, prismatic glass and
Fresnel glass
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
140
8’ x 8’
79
10’ x 10’
51
12’ x 12’
35
7509
7001
5192
2431
888
454
254
125
40
9
Footcandles
Dist.@ Center@ Edge Dia.
6’209 86 4.4’
7’153 63 5.2’
8’117 48 5.9’
9’93 386.7’
10’75 31 7.4’
11’62 26 8.1’
12’52 22 8.9’
13’44 18 9.6’
14’38 1610.3’
15’33 1411.1’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M12-EDS-100E-Q
Rough-In
M12-EDS M12-EDS
Options
100E
100W ED17
Coated non-protected
MH, 120/277V, Electronic
150E277
150W ED17
Coated non-protected
MH, 277V, Electronic
Color Options
Reflector
-
150E120
150W ED17
Coated non-protected
MH, 120V, Electronic
82
Example: M1201LC-W-FG
Wattage/Lamp
Example: SCA12-20
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot start auxiliary control (Must specify Q option for reflector
QS Quartz socket only with leads (Must specify Q for reflector)
†SW Lamp Sensing Switch
M1201LC
Lower Cone
M1201B
Lower Baffle
Lens Type
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Low Iridescent
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
only
Options
Accessories
WH White Flange
WET Wet Location
Listing
Q
Hole for quartz restrike
SCA12-*Sloped Ceiling
Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA12-20
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
†Consult Factory for Availability
12” ED17 OR BT/ED28 VERTICAL CMH LENSLITE
enclosed aperture, magnetic ballast
13" (100W/150W)
13 5/8" (175W/250W)
19 1/8"
25"
11 1/4" Dia.
Open
12 1/8" Dia.
Ceiling Cutout
product specifications
lenslite (100w coated ed-17 metal halide)
lenslite (250W coated bt-28 metal halide)
Lower Cone: Regressed aluminum cone
• White painted or low iridescent Alzak® cone •
Alzak® cone can be clear, gold, wheat, pewter or
bronze, in specular or satin finish • Painted white
flange is optional
Catalog Number: M12-EDS-100M (M1201LC-W-FG)
Test Number: PR12970499
Total Luminaire Efficiency: 58.0%
Luminaire Spacing Criteria: 0.65
Lamps: One OSI M100/C/U, rated at 7900 lumens.
Catalog Number: M10-EDS-250M (M1002LC-W-FG)
Test Number: PR11972101
Total Luminaire Efficiency: 57.1%
Luminaire Spacing Criteria: 0.99
Lamps: One OSI M250/C/U, rated at 20,500 lumens.
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Lamp Holder: Medium base (for 150W and
below) or mogul base (for 175W and above)
heavy duty 4Kv porcelain socket with nickel
plated brass screw shell in die-cast socket
housing • Socket prevents the use of metal
halide lamps that are not “open fixture” rated
Lens: Clear glass, prismatic glass and Fresnel
glass
Ballast: 120/277 Volt dual tap primary core
and coil, high power factor, insulation class
“H” 180°C, reliable starting to -30°C. Includes
capacitor and igniter (where required)
Mounting Frame: Accommodates ceilings up
to 3/4” thick; ceiling thickness adapter accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without
notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
140
8’ x 8’
79
10’ x 10’
51
12’ x 12’
35
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
7509
7001
5192
2431
888
454
254
125
40
9
Footcandles
Dist.@ Center@ Edge Dia.
6’209 86 4.4’
7’153 63 5.2’
8’117 48 5.9’
9’93 386.7’
10’75 31 7.4’
11’62 26 8.1’
12’52 22 8.9’
13’44 18 9.6’
14’38 1610.3’
15’33 1411.1’
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
10’ x 10’
127
14’ x 14’
65
18’ x 18’
39
22’ x 22’
26
8133
8067
7569
5880
3951
2324
1236
438
194
42
Footcandles
Dist.@ Center@ Edge Dia.
6’226 64 8.2’
7’166 47 9.6’
8’127 3610.9’
9’100 2812.3’
10’81 2313.7’
11’67 1915.0’
12’57 1616.4’
13’48 1417.8’
14’42 1219.2’
15’36 1020.5’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M12-EDS-250M-Q
Rough-In
M12-EDS M12-EDS
Options
150M
150W ED17
Coated non-protected
MH, 120/277V, Magnetic
175M
175W BT/ED28
Coated non-protected
MH, 120/277V, Magnetic
Color Options
Reflector
100M
100W ED17
Coated non-protected
MH, 120/277V, Magnetic
Example: SCA12-20
Example: M1202LC-W-FG
Wattage/Lamp
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot start auxiliary control (Must specify Q option for reflector)
QS Quartz socket only with leads (Must specify Q for reflector)
M1201LC
Lower Cone
(100-150W)
M1202LC
Lower Cone
(175-250W)
M1201B
Lower Baffle
(100-150W)
M1202B
Lower Baffle
(175-250W)
Lens Type
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
only
Options
Accessories
WH White Flange
WET Wet Location
Listing
Q
Hole for quartz restrike
SCA12-*Sloped Ceiling
Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA12-20
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
250M
250W BT/ED28
Coated non-protected
MH, 120/277V, Magnetic
†Consult Factory for Availability
83
DOWNLIGHTS
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Candlepower
Distribution
12” ED17 HORIZONTAL CMH LENSLITE
ENCLOSED aperture, electronic ballast
17 1/8"
10 1/4"
21 7/16"
11 1/4" Dia.
Open
12 1/4" Dia.
Ceiling Cutout
product specifications
lenslite (150W COATED ED-17 M.H.)
Lower Cone: Regressed aluminum cone
• White painted or low iridescent Alzak® cone •
Alzak® cone can be clear, gold, wheat, pewter or
bronze, in specular or satin finish • Painted white
flange is optional
Catalog Number: M12-H-EDS-150E (M1252LC-W-FG)
Test Number: PR06061699
Total Luminaire Efficiency: 51.0%
Luminaire Spacing Criteria: 0.94
Lamps: One (1) Philips MHC150/C/U/M35, rated at
12,500 lumens.
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell • Socket prevents the use of metal halide
lamps that are not “open fixture” rated
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Lens: Clear glass, prismatic glass and Fresnel
glass
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below for
details), high power factor and reliable starting to -30°C
Mounting Frame: Accommodates ceilings up
to 3/4” thick; ceiling thickness adapter accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
191
8’ x 8’
107
10’ x 10’
69
12’ x 12’
48
4377
3956
3095
2964
2494
1473
694
238
130
44
Footcandles
Dist.@ Center@ Edge Dia.
6’122 30 9.4’
7’ 89 2211.0’
8’ 68 1712.6’
9’ 54 1314.2’
10’44 1115.7’
11’36 9 17.3’
12’30 7 18.9’
13’26 6 20.5’
14’22 5 22.0’
15’20 5 23.6’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M12H-EDS-150E120-F
Rough-In
M12H-EDS M12H-EDS
Options
150E120
150W ED17
Coated non-protected
MH, 120V, Electronic
Color Options
Reflector
-
150E277
150W ED17
Coated non-protected
MH, 277V, Electronic
84
Example: M1252LC-W-FG
Wattage/Lamp
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot start auxiliary control (Must specify Q option for reflector
QS Quartz socket only with leads (Must specify Q for reflector)
M1252LC
Lower Cone
M1252B
Lower Baffle
Lens Type
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
only
Options
Accessories
WH White Flange
WET Wet Location
Listing
Q
Hole for quartz restrike
HB-TL 25” Tru-Lock grid ceiling bar hangers, Pair
HB-52 52” C-Channel Bar Hangers, Pair
HB-28 28” C-Channel Bar Hangers, Pair
LB-27 27” Linear Bar Hangers, Pair
SCA12-*Sloped Ceiling Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA12-20
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
†Consult Factory for Availability
12” ED17 OR BT/ED28 HORIZONTAL LENSLITE
enclosed aperture, magnetic ballast
20"
10 1/4"
25"
11 1/4" Dia.
Open
12 1/4" Dia.
Ceiling Cutout
product specifications
lenslite (100w coated ed-17 metal halide)
Lower Cone: Regressed aluminum cone
• White painted or low iridescent Alzak®
cone • Alzak® cone can be clear, gold,
wheat, pewter or bronze, in specular or satin
finish • Painted white flange is optional
Catalog Number: M12H-EDS-250M (M1252LC-W-FG)
Test Number: PR12030901
Total Luminaire Efficiency: 55.1%
Luminaire Spacing Criteria: 1.21
Lamps: One OSI M250/C/U, rated at 19,500 lumens.
Baffle: White or black painted deep multigroove aluminum baffle insert with integral
flange painted white
Reflector: .050” aluminum upper reflector with
clear Alzak® finish
Lens: Clear glass, prismatic glass and Fresnel
glass
Ballast: 120/277 Volt dual tap primary core
and coil, high power factor, insulation class
“H” 180°C, reliable starting to -30°C. Includes
capacitor and igniter (where required)
Mounting Frame: Accommodates ceilings up
to 3/4” thick; ceiling thickness adapter accessory is available for ceilings up to 2”
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
10’ x 10’
115
14’ x 14’
59
18’ x 18’
36
22’ x 22’
24
5446
5674
5391
4954
3879
2519
1332
487
245
52
DOWNLIGHTS
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
Lamp Holder: Medium base (for 150W) or
mogul base (for 175W and above) heavy duty
4Kv porcelain socket with nickel plated brass
screw shell • Socket prevents the use of metal
halide lamps that are not “open fixture” rated
Footcandles
Dist.@ Center@ Edge Dia.
6’151 3211.0’
7’111 2312.8’
8’ 85 1814.7’
9’ 67 1416.5’
10’55 1118.3’
11’45 9 20.2’
12’38 8 22.0’
13’32 7 23.8’
14’28 6 25.7’
15’24 5 27.5’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M12H-EDS-150M-Q
Rough-In
M12H-EDS M12H-EDS
Options
175M
175W BT/ED28
Coated non-protected
MH, 120/277V, Magnetic
250M
250W BT/ED28
Coated non-protected
MH, 120/277V, Magnetic
†Consult Factory for Availability
Color Options
Reflector
150M
150W ED17
Coated non-protected
MH, 120/277V, Magnetic
Example: SCA12-20
Example: M1252LC-W-FG
Wattage/Lamp
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Q
Quartz restrike with hot start auxiliary control (Must specify Q option for reflector)
QS Quartz socket only with leads (Must specify Q for reflector)
M1252LC
Lower Cone
M1252B
Lower Baffle
Lens Type
C Clear
GGold
WTWheat
PT Pewter
BZ Bronze
B Black
(baffle only)
WWhite
Alzak® Finishes:
LSpecular
SSatin
Blank for baffle & white
only
Options
Accessories
WH White Flange
WET Wet Location
Listing
Q
Hole for quartz restrike
SCA12-*Sloped Ceiling
Adapter
*Angle must be specified
when ordering; Available in
5°, 10°, 15°, 20°, 25°, 30°
Example: SCA12-20
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass
85
CMH
Wall Wash
Fixtures
The Indy CMH product line offers a variety
of outstanding fixture designs for wall wash
applications. The selection falls into two
categories: open-downlight wall wash and
spread-lens wall wash.
Indy CMH open-downlight wall wash fixtures
feature a vertical lamp design that provides
uniform light distribution with excellent
brightness control. Reflectors are available for
single, double or corner wall wash applications.
Indy CMH spread-lens wall wash fixtures provide uniform
They share all the features of the Indy CMH downlight
illumination of vertical surfaces without scallops. They
family including Cascading Vector™ designed optics,
feature borosilicate spread lenses for high-quality optical
beautiful colors and finishes, Tru-Lock bar-hanger mounting
control and the entire optical assembly is capable of 358º
system, and, of course, the energy efficiency and extended
rotation. The spread-lens fixtures are available in a collection
service life of ceramic metal halide lamps. To facilitate ordering
of elegant colors and finishes, and offer the Tru-Lock bar-
and specifying, single wall wash reflectors use the same
hanger mounting system, as well as the energy efficiency and
rough-in as the open reflectors.
extended service life of ceramic metal halide lamps.
Indy CMH Wall Wash features:
• Ceramic metal halide lamps save energy and reduce
relamping costs.
• Open-downlight style fixtures with single, double and
corner wall wash capabilities.
• Spread-lens fixtures for vertical surface illumination with
out scalloping; 358 degrees of rotation.
• Proprietary, self-centering Tru-Lock bar hanger system for
suspended ceilings saves time; cuts installation costs.
• Universal mounting brackets accommodate Tru-Lock and
industry standard linear bars, 1/2” EMT, and 3/4” and
1-1/2” C-channels.
• Oversized junction boxes for ease of wiring.
• High power factor ballast.
• UL/C-UL Listed.
• Wide range of beautiful finishes with matching built-in
• A host of options and accessories enhances both
ceiling flange.
functionality and versatility.
87
6 ” t 4 cmh s p r e a d l e n s w a l l w a s h
enclosed aperture, electronic ballast
15 1/4"
7 1/8"
15"
6 1/8" Dia. Open
6 3/4" Dia.
Ceiling Cutout
product specifications
luminaires spaced 3’ from wall
Lens/Reflector: Borosilicate spread lens with
clear Alzak® aluminum upper reflector • Entire
optical system rotates 358˚ • Single position
locked optics eliminate possibility of specified
lamp being installed in incorrect position
Cone: Aluminum angular cut cone • Specular
or satin Alzak® cone in clear, gold, wheat,
pewter or bronze with integral flange of same
finish; other finishes available upon request
• Painted white flange is optional
Ballast: T4/T4.5 and T4 Mini – Universal
120/277 volt electronic solid state, high
power factor and reliable starting to -30°C
• BT5 – 120 volt electronic solid state, high
power factor and reliable starting to -20°C
Lamp Holder: T4/T4.5 – G8.5 bi-pin socket
base with recessed female contacts • 1A,
750V, rated for 5KV pulse • T4 Mini – Twist
and lock GU6.5 base; 2A, 250V rated for
5KV pulse • BT5 – Twist and lock PGJ5 base;
2A, 250V rated for 2.5KV pulse
Mounting Frame: Accommodates ceilings up
to 3/4” thick
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
Catalog Number: M6AW-T4-39E (MT6WL-CL)
Spread: Single wall
Lamps: One (1) 39-Watt T4 (MHC39/C/U/MP/3K) metal halide, rated at 3300 lumens.
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
39W T4 M.H.Spaced 3’ From WallSpaced 3’ From WallSpaced 3’ From Wall
CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’ Distance From CeilingCL
15 10
5
2
1 1
1’
19 1619 17 11 16
154 16
8
2 2
2’
53 49 53
3716 39
38 32 22 12
7 4
3’
636265 504451 42
15
42
33 27 22 14
8 4
4’
62 61 62 49 46 48
3927 38
26 23 17 11
8 5
5’
55 56 55 43 43 43
3327 32
19 18 16 10
7 5
6’
44 45 44 35 35 34
2623 25
13 12 11
8
6 5
7’
34 34 34 27 27 27
1918 19
10 9
8
7
5 4
8’
27 27 27 22 22 21
1615 15
8 7
6
5
4 3
9’
22 23 22 18 18 18
1312 13
37 27 16
4
33 44
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
luminaires spaced 4’ from wall
Catalog Number: M6AW-T4-39E (MT6WL-CL)
Spread: Single wall
Lamps: One (1) 39-Watt T4 (MHC39/C/U/MP/3K) metal halide, rated at 3300 lumens.
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
39W T4 M.H.Spaced 4’ From WallSpaced 4’ From WallSpaced 4’ From Wall
CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’Distance From CeilingCL
5 5
3
2 1 1
1’
18 14
9
5
3 2
2’
28 27 29 23 20 23
9
6 4
24 20 14
8 8 9 8 7 7
74 7
2011 19
3’
444344 353135 27
19
27
23 20 15 11 7 5
4’
48 48 48 38 36 38
22 19 15 12 9 5
5’
49 49 49 38 38 38
2825 28
17 17 14 11 7 6
6’
44 44 44 34 34 34
2523 24
14 13 12
9
7 5
7’
38 38 38 30 30 30
2120 21
11 10
9
8
6 5
8’
31 32 31 25 25 25
1817 18
9 8
8
6 5 4
9’
27 27 27 22 22 21
1615 16
2922 28
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Lamp Multipliers:20W - 0.52
70W - 1.94
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6AW-BT-20E1
M6AW-T4
T4/T4.5
MH Lamp
G8.5
base
M6AW-TM1
T4 Mini
MH Lamp
GU6.5
base
M6AW-BT2
BT5 MH
Lamp PGJ5
88
Example: MT6WL-CL
Wattage/Lamp
Rough-In
Options
MT6WL
20E
(T4 Mini, T4/T4.5)
20W 120/277V Electronic
20E1
(BT5 only)
20W 120/277V Electronic
39E
(T4/T4.5 only)
39W 120/277V Electronic
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Color Options
Reflector
MT6WL
Spread Lens
Wall Wash
Example: HB-TL
Finish
-
Options
Accessories
C Clear
GGold
WT Wheat
PT Pewter
BZBronze
BBlack
W White
Low Iridescent
Alzak® Finishes:
L
Specular
S
Satin
Blank for white
WH White Flange
70E
(T4/T4.5 only)
70W 120/277V Electronic
† Consult Factory for Availability
1
GE SuperMini T4
2
Philips Mini MasterColor® CDM-Tm
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
6 ” t 6 cmh s p r e a d l e n s w a l l w a s h
enclosed aperture, electronic ballast
15 1/4"
7 1/8"
15"
6 1/8" Dia. Open
6 3/4" Dia.
Ceiling Cutout
product specifications
luminaires spaced 3’ from wall
Lens/Reflector: Borosilicate spread lens with
clear Alzak® aluminum upper reflector • Entire
optical system rotates 358˚ • Single position
locked optics eliminate possibility of specified
lamp being installed in incorrect position
Catalog Number: M6AW-T6-70E (MT6WL-CL)
Spread: Single wall
Lamps: One (1) 70-Watt T6 (MHC70/C/U/MP/3K) metal halide, rated 6600 lumens.
Cone: Aluminum angular cut cone • Specular
or satin Alzak® cone in clear, gold, wheat,
pewter or bronze with integral flange of same
finish; other finishes available upon request
• Painted white flange is optional
Ballast: Universal 120/277 volt electronic
solid state, high power factor and reliable
starting to -30°C
Lamp Holder: G12 socket base with heavy
duty recessed female contacts • 660W, 600V
rated for 5KV pulse
Housing: Heavy gauge steel with black baked
enamel finish
Mounting Frame: Accommodates ceilings up
to 3/4” thick
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
29 20 10
5
79 57 32 15
3 2
1’
8 4
2’
38 3238 34 22 32
111 99110 93 66 92
299 31
7931 82
80 56 45 24 13 7
3’
129 125130 103 89 104
88 49 87
67 57 43 26 15 9
4’
123 121122 96
90 96
78 52 75
107 108108 84
51 44 32 22 15 9
5’
83 83
64 51 62
36 35 25 19 13 10
6’
84 85 84 66 66 65
4943 47
24 22 20 15 12 9
7’
63 64 63 50 50 50
3634 36
18 17 15 12
9 8
8’
49 50 50 40 40 39
2927 28
14 13 12 10
8 6
9’
40 41 41 33 34 33
2423 24
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
luminaires spaced 4’ from wall
Catalog Number: M6AW-T6-70E (MT6WL-CL)
Spread: Single wall
Lamps: One (1) 70-Watt T6 (MHC70/C/U/MP/3K) metal halide, rated at 6600 lumens.
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
70W T6 M.H.Spaced 4’ From WallSpaced 4’ From WallSpaced 4’ From Wall
CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’Distance From CeilingCL
10 8
1’
161617 151314 13713
36 28 18 11 6 4
5
4
3 2
2’
57 53 58 47 40 46
4022 39
50 42 29 19 11 7
3’
90 88 91 72 64 72
5738 57
49 42 31 23 15 9
4’
97 97 98 77 73 76
5945 58
44 39 31 24 17 10
5’
98 99 98 77 76 76
5748 55
35 33 26 21 14 11
6’
85 86 86 67 67 67
4944 48
26 25 22 17 13 10
7’
72 73 72 57 57 57
4039 40
20 19 17 14 11 9
8’
59 60 59 47 48 47
3433 34
16 16 12 12 10 8
9’
50 51 51 41 41 40
2929 29
WALL WASHERS
Product specifications subject to change without
notice.
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
70W T6 M.H.Spaced 3’ From WallSpaced 3’ From WallSpaced 3’ From Wall
CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’ Distance From CeilingCL
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Lamp Multipliers:39W - 0.55
150W - 2.10
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6AW-T6-70E
Example: MT6WL-CL
Wattage/Lamp
Rough-In
M6AW-T6 M6AW-T6
T6 MH
Lamp
Options
MT6WL
39E
39W T6 MH, 120/277V
Electronic
70E
70W T6 MH 120/277V
Electronic
E
150E1
150W T6 MH 120V Electronic
E
150E2
150W T6 MH 277V Electronic
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
Indicates that the product meets DOE energy efficient
standards - EISA compliant.
† Consult Factory for Availability
Color Options
Reflector
MT6WL
Spread Lens
Wall Wash
Example: HB-TL
Finish
-
Options
Accessories
C Clear
GGold
WT Wheat
PT Pewter
BZBronze
BBlack
W White
Low Iridescent
Alzak® Finishes:
L
Specular
S
Satin
Blank for white
WH White Flange
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
E
89
8 ” t 6 cmh s p r e a d l e n s w a l l w a s h
enclosed aperture, electronic ballast
15 1/4"
7 1/8"
15"
7 3/8" Dia. Open
8 1/8" Dia.
Ceiling Cutout
18 3/4" (150W)
product specifications
luminaires spaced 3’ from wall
Lens/Reflector: Borosilicate spread lens with
clear Alzak® aluminum upper reflector • Entire
optical system rotates 358˚ • Single position
locked optics eliminate possibility of specified
lamp being installed in incorrect position
Catalog Number: M8AW-T6-70E (MT8WL-CL)
Spread: Single wall
Lamps: One (1) 70-Watt T6 (MHC70/C/U/MP/3K) metal halide, rated at 6600 lumens.
Cone: Aluminum angular cut cone • Specular
or satin Alzak® cone in clear, gold, wheat,
pewter or bronze with integral flange of same
finish; other finishes available upon request
• Painted white flange is optional
Ballast: Universal 120/277 volt electronic
solid state, high power factor and reliable
starting to -30°C
Lamp Holder: G12 socket base with heavy
duty recessed female contacts • 660W, 600V
rated for 5KV pulse
Housing: Heavy gauge steel with black baked
enamel finish
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
70W T6 M.H.Spaced 3’ From WallSpaced 3’ From WallSpaced 3’ From Wall
CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’ Distance From CeilingCL
30 22 12
3 3
1’
9 5
2’
120 109119 98
84 71 52 30 17 10
3’
146 149146 114 109 115
92 60 92
72 62 49 32 19 11
4’
140140139 109105108
8362 82
55 48 36 25 18 12
5’
122 122122 95
68 58 68
39 38 28 21 15 11
6’
949495 757474 53
48
52
25 24 21 17 13 11
7’
70 70 70 56 56 55
3937 39
19 18 16 13 10 9
8’
54 54 54 44 44 43
3129 31
15 14 12 10
9’
44 44 44 36 37 36
2624 26
Product specifications subject to change
without notice.
8 7
39 35 40 35 25 33
79 96
94 95
2910 32
79 38 83
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
luminaires spaced 4’ from wall
Catalog Number: M8AW-T6-70E (MT8WL-CL)
Spread: Single wall
Lamps: One (1) 70-Watt T6 (MHC70/C/U/MP/3K) metal halide, rated at 6600 lumens.
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
70W T6 M.H.Spaced 4’ From WallSpaced 4’ From WallSpaced 4’ From Wall
CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’Distance From CeilingCL
Mounting Frame: Accommodates ceilings up
to 3/4” thick
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
6
79 60 38 19
11 9
1’
18 1819 16 14 15
35 28 20 13 8 5
6
4
3 3
2’
60 57 61 49 43 47
149 14
3926 39
52 45 32 23 14 9
3’
101 99102 80 73 79
6046 61
64 53 64
51 45 35 27 19 11
4’
110 110187 87
84 86
47 42 34 27 20 13
5’
111 112187 87
87 87
63 57 62
37 36 29 24 16 13
6’
97 98 76 76 76 76
5451 54
28 27 24 19 15 12
7’
808264 646564 46
44
46
22 21 18 16 12 11
8’
65 66 53 53 53 52
3837 38
17 17 15 13 10 8
9’
55 56 45 45 45 45
3332 33
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
Lamp Multipliers:39W - 0.55
150W - 2.10
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8AW-T6-39E1
Example: MT8WL-CL
Wattage/Lamp
Rough-In
M8AW-T6 M8AW-T6
T6 MH
Lamp
Options
39E
39W T6 MH, 120/277V
Electronic
70E
70W T6 MH 120/277V
Electronic
E
150E1
150W T6 MH 120V Electronic
E
150E2
150W T6 MH 277V Electronic
Color Options
Reflector
Example: HB-TL
Finish
†347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
MT8WL
Spread Lens
Wall Wash
Accessories
C Clear
GGold
WT Wheat
PT Pewter
BZBronze
BBlack
W White
Low Iridescent
Alzak® Finishes:
L
Specular
S
Satin
Blank for white
WH White Flange
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
Indicates that the product meets DOE energy efficient
standards - EISA compliant.
† Consult Factory for Availability
E
90
Options
6 ” p a r 3 8 cmh s p r e a d l e n s w a l l w a s h
enclosed aperture, electronic ballast
15"
12"
15 1/4"
18 3/4" (150W)
6 1/8" Dia.
Open
6 3/4" Dia.
Ceiling Cutout
product specifications
luminaires spaced 3’ from wall
Lens/Reflector: Borosilicate spread lens
with clear Alzak® aluminum upper reflector
• Entire optical system rotates 358° • Single
position locked optics eliminate possibility of
specified lamp being installed in incorrect
position
Catalog Number: M6AW-P38-100E (P6WL-P38-CL)
Spread: 55° Single wall
Lamps: One (1) 100-Watt PAR38 (MP100PAR38/U/FL35) metal halide, rated at 5500 lumens.
Cone: Aluminum angular cut cone • Low
iridescent specular clear Alzak® cone in
clear, gold, wheat, pewter, bronze or black
with integral flange of same finish; other
finishes available upon request • Painted
white flange is optional
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings UL/C-UL listed for feed
through and damp locations • I.B.E.W.
Union made
6 5
3
2
1 1
1’
13 10
6
3
2 1
2’
29 28 29 23 20 23
8
3 2
3’
55 53 55 42 41 42
3730 37
44 37 25 14
7 3
4’
83 79 83 64 60 64
5545 55
45 40 28 18
9 5
5952 59
29 24 16
191819 151315 13913
2015 20
5’
93 90 93 70 67 70
37 34 26 18 11 6
6’
878687 666566 54
51
54
28 27 22 16 11 7
7’
76 76 76 58 58 58
4745 47
22 21 18 14 10 7
8’
65 65 65 50 50 50
4040 40
18 17 15 13 10 7
9’
58 58 58 45 45 45
3636 36
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
luminaires spaced 4’ from wall
Catalog Number: M6AW-P38-100E (P6WL-P38-CL)
Spread: 55° Single wall
Lamps: One (1) 100-Watt PAR38 (MP100PAR38/U/FL35) metal halide, rated at 5500 lumens.
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
100W PAR38 M.H.Spaced 4’ From WallSpaced 4’ From WallSpaced 4’ From ll
CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’Distance From CeilingCL
3 2
2
1 1 1
1’
15 1515 12 11 12
5 5
4
3 2 1
2’
202020 161516 13
11
13
9 8
6
4 3 2
3’
28 28 28 21 21 21
1716 17
9
5 3
4’
45 43 45 34 32 34
2726 27
24 22 17 13 8 5
5’
62 59 62 47 44 47
3836 38
27 25 20 15 10 6
6’
72 71 72 55 53 55
4442 44
26 24 20 16 11 7
7’
74 73 74 57 55 57
4544 45
23 22 19 15 12 8
8’
70 70 70 55 54 55
4443 44
20 20 18 15 11 9
9’
66 66 66 52 52 52
4241 42
17 15 12
9 8 9
WALL WASHERS
Product specifications subject to change
without notice.
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
100W PAR38 M.H.Spaced 3’ From WallSpaced 3’ From WallSpaced 3’ From Wall
CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’ Distance From CeilingCL
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6AW-P38-100E
Rough-In
M6AW-P38- M6AW-P38
Example: P6WL-P38-CL-WH
Wattage/Lamp
Options
70E
70W PAR38 MH, 120/277V
Electronic
100E
100W PAR38 MH, 120/277V
Electronic
150E120
150W PAR38 MH, 120V
Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
P6WL-P38
Spread Lens
WW
Options
Accessories
C Clear
GGold
WT Wheat
PT Pewter
BZBronze
BBlack
W White
Low Iridescent
Alzak® Finishes:
L
Specular
S
Satin
Blank for white
WH White Flange
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
150E277
150W PAR38 MH, 277V
Electronic
† Consult Factory for Availability
91
8 ” p a r 3 8 cmh s p r e a d l e n s w a l l w a s h
enclosed aperture, electronic ballast
15"
12"
15 1/4"
18 3/4" (150W)
7 3/8" Dia.
Open
8 1/8" Dia.
Ceiling Cutout
product specifications
luminaires spaced 3’ from wall
Lens/Reflector: Borosilicate spread lens
with clear Alzak® aluminum upper reflector
• Entire optical system rotates 358° • Single
position locked optics eliminate possibility of
specified lamp being installed in incorrect
position
Catalog Number: M8AW-P38-100E (P8WL-P38-CL)
Spread: 55°
Lamps: One (1) 100-Watt PAR38 (MP100PAR38/U/FL35) metal halide lamp, rated at 5500 lumens.
Cone: Aluminum angular cut cone • Low
iridescent specular clear Alzak® cone in
clear, gold, wheat, pewter, bronze or black
with integral flange of same finish; other
finishes available upon request • Painted
white flange is optional
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
Labels and Listings UL/C-UL listed for feed
through and damp locations • I.B.E.W.
Union made
Product specifications subject to change
without notice.
Single Unit
Lamp
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers*
Lateral Distance From Fixture 3’ From Wall
100W PAR38 M.H.
Spaced 3’ From Wall Spaced 3’ From Wall
CL CL
CL
0’
1’
2’ 3’ 4’5’ Distance From CeilingCL
5
5
3
1
1
1
1’
8
8
8
7
6
7
12
8
4
2
1
1
2’
17
14
17
14
9
14
26
26
15
8
4
2
3’
43
47
43
34
32
34
38
23
13
6
3
2
4’
53
41
53
46
27
46
40
30
17
8
5
3
5’
60
55
60
52
37
52
36
29
20
12
6
4
6’
66
59
66
51
45
51
30
25
18
11
7
5
7’
60
55
60
48
43
48
23
21
17
12
8
5
8’
54
51
54
42
40
42
18
17
14
10
8
5
9’
47
44
47
39
37
39
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
luminaires spaced 4’ from wall
Catalog Number: M8AW-P38-100E (P8WL-P38-CL)
Spread: 55°
Lamps: One (1) 100-Watt PAR38 (MP100PAR38/U/FL35) metal halide lamp, rated at 5500 lumens.
0’
Single Unit
Lamp
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers*
Lateral
Distance From Fixture 3’ From Wall
100W PAR38 M.H.
Spaced 4’ From Wall Spaced 4’ From Wall
Distance From CeilingCL
CL CL
CL
1’ 2’3’4’
5’
2
2
1
1
1
1
1’
3
3
3
3
2
4
4
3
2
1
1
2’
7
6
7
6
5
6
8
6
4
3
1
1
3’
11
9
11
9
7
9
3
15
10
6
4
2
1
4’
19
13
19
17
10
17
21
14
9
5
3
2
5’
29
21
29
25
15
25
23
18
12
7
5
3
6’
34
27
34
29
21
29
23
19
13
9
5
4
7’
36
31
36
30
24
30
21
17
13
9
7
5
8’
37
32
37
30
25
30
18
16
13
10
7
5
9’
36
32
36
27
26
27
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8AW-P38-100E
Rough-In
M8AW-P38- M8AW-P38
Example: P8WL-P38-CL-WH
Wattage/Lamp
Options
70E
70W PAR38 MH, 120/277V
Electronic
100E
100W PAR38 MH, 120/277V
Electronic
150E120
150W PAR38 MH, 120V,
Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
P8WL-P38
Spread Lens
WW
Options
C Clear
GGold
WT Wheat
PT Pewter
BZBronze
BBlack
W White
Low Iridescent
Alzak® Finishes:
L
Specular
S
Satin
Blank for white
WH White Flange
150E277
150W PAR38 MH, 277V
Electronic
92
Accessories
-
† Consult Factory for Availability
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
6 ” e d 1 7 v e r t ic a l cmh w a l l w a s h
Open aperture, electronic ballast
11 11/16"
9 1/8"
Single=13 1/2"
Double/Corner=
13 9/16"
6" Dia.
Open
Single = 6 7/8"
Double/Corner = 7"
Ceiling Cutout
product specifications
luminaires spaced 3’ from wall
Reflector: Cascading Vector optical design
ensures a 50° visual cut-off to both lamp and
lamp image • Low iridescent specular or
satin Alzak® .050” thick reflector in clear,
gold, wheat, pewter or bronze with integral
flange of same finish; other finishes available
upon request • Painted white flange is
optional
Catalog Number: M6-ED-100E (M600WS-CL)
Spread: Single wall
Lamps: One (1) 100-Watt Coated ED-17 (MHC100/C/U/MP/3K) metal halide, rated at 8500 lumens.
Wall wash: Diffuse wall wash kicker
reflector • Primary reflector with single wall
cut-out standard
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell in die-cast socket housing
• Socket prevents the use of metal halide
lamps that are not “open fixture” rated
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
• Common rough-in section accepts open
and single wall wash reflectors
Product specifications subject to change
without notice.
17 14
9
6
4 4
1’
27 25 27 23 19 23
7 6
2’
64 61 64 54 45 54
4621 46
51 43 29 17 10 7
3’
83 82 83 66 60 66
5532 55
40 33 20 12
2010 20
47 41 32 21 12 8
4’
85 84 85 66 64 66
5338 53
37 33 26 20 14 9
5’
77 77 77 60 60 60
4438 44
27 27 21 17 13 10
6’
636463 495049 35
33
35
19 18 17 14 12 10
7’
50 50 50 40 40 40
2727 27
15 14 13 12 10 9
8’
41 42 41 32 33 32
2322 23
12 12 11 10
9’
35 36 35 28 29 28
2019 20
9 8
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
luminaires spaced 4’ from wall
Catalog Number: M6-ED-100E (M600WS-CL)
Spread: Single wall
Lamps: One (1) 100-Watt Coated ED-17 (MHC100/C/U/MP/3K) metal halide, rated at 8500 lumens.
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
100W ED-17 M.H.Spaced 4’ From WallSpaced 4’ From WallSpaced 4’ From l
CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’Distance From CeilingCL
9 8
6
5 4 4
1’
181818 151415 12912
21 17 13 10 7 6
2’
39 38 39 32 21 32
2518 25
29 26 19 13 10 7
3’
55 55 55 45 43 45
3426 34
32 30 25 17 12 9
4’
67 67 67 53 52 53
3932 39
31 28 24 19 14 10
5’
69 69 69 54 54 54
3935 39
25 25 21 18 14 11
6’
62 63 62 49 49 49
3533 35
20 19 18 16 13 11
7’
55 55 55 43 44 43
3030 30
16 15 14 13 11 10
8’
46 46 46 37 37 37
2525 25
13 13 12 11 10 9
9’
39 40 39 32 32 32
2222 22
WALL WASHERS
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
100W ED-17 M.H.Spaced 3’ From WallSpaced 3’ From Wall Spaced 3’ From CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’ Distance From CeilingCL
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M6W-ED-100E
M6-ED
Single WW
M6W-ED
Corner &
Double
Wall Wash
Reflector
Example: M600WD-CL
Wattage/Lamp
Rough-In
Options
50E120
50W ED17 Coated Protected
MH, 120V Electronic
50E277
50W ED17 Coated Protected
MH, 277V Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
†SW Lamp Sensing Switch
M600WS
Single WW
M600WD
Double WW
M600WC
Corner WW
Options
Accessories
C Clear
GGold
WT Wheat
PT Pewter
BZBronze
W White
Low Iridescent
Alzak® Finishes:
L
Specular
S
Satin
Blank for white
WH White Flange
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
70E
70W ED17 Coated Protected
MH, 120/277V Electronic
100E
100W ED17 Coated Protected
MH, 120/277V Electronic
† Consult Factory for Availability
93
8 ” e d 1 7 v e r t ic a l cmh w a l l w a s h
Open aperture, electronic ballast
13 1/8"
9 1/4"
14 7/8"
17 3/8" (150W)
7 3/8" Dia.
Open
Single = 8 1/8"
Double/Cor ner = 8 1/2"
Ceiling Cutout
product specifications
luminaires spaced 3’ from wall
Reflector: Cascading Vector optical design
ensures a 50° visual cut-off to both lamp and
lamp image • Low iridescent specular or
satin Alzak® .050” thick reflector in clear,
gold, wheat, pewter or bronze with integral
flange of same finish; other finishes available
upon request • Painted white flange is
optional
Catalog Number: M8-ED-100E (M800WS-CL)
Spread: Single wall
Lamps: One (1) 100-Watt Coated ED-17 (MHC100/C/U/MP/3K) metal halide, rated at 8500 lumens.
Wall wash: Diffuse wall wash kicker
reflector • Primary reflector with single wall
cut-out standard
Ballast: Universal 120/277 Volt electronic
solid state (see ordering information below
for details), high power factor and reliable
starting to -30°C
Lamp Holder: Medium base heavy duty
4Kv porcelain socket with nickel plated brass
screw shell in die-cast socket housing
• Socket prevents the use of metal halide
lamps that are not “open fixture” rated
Mounting Frame: Accommodates ceilings
up to 3/4” thick; ceiling thickness adapter
accessory is available for ceilings up to 2”
• Common rough-in section accepts open
and single wall wash reflectors
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change
without notice.
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
100W ED-17 M.H.Spaced 3’ From WallSpaced 3’ From WallSpaced 3’ From Wall
CL
CL
CL
CL
CL
0’ 1’ 2’ 3’4’5’Distance From CeilingCL
24 20 14 9
6
1’
39 38 39 32 30 32
2715 27
51 42 29 18 11 8
6
2’
86 83 86 69 61 69
5632 56
56 49 36 22 14 10
3’
999999 787578 61
41
61
52 46 38 26 16 11
4’
99 99 99 77 77 77
5746 57
44 40 33 25 17 11
5’
93 93 93 73 73 73
5146 51
34 33 27 23 18 13
6’
79 80 79 62 62 62
4342 42
25 24 23 19 16 13
7’
66 66 66 52 52 52
3535
8’
54 55 54 43 44 43
2929 29
35
19 19 18 16 14 13
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
luminaires spaced 4’ from wall
Catalog Number: M8-ED-100E (M800WS-CL)
Spread: Single wall
Lamps: One (1) 100-Watt Coated ED-17 (MHC100/C/U/MP/3K) metal halide, rated at 8500 lumens.
Single Unit
Lamp
Multiple Units
Multiple Units
Multiple Units
On 3’ Centers*
On 4’ Centers* On 6’ Centers*
Lateral
Distance From Fixture 3’ From Wall
100W ED-17 M.H.Spaced 4’ From WallSpaced 4’ From Wall Spaced 4’ From CL
CL
CL
CL
CL
0’ 1’ 2’ 3’ 4’5’ Distance From CeilingCL
10 9
7
6
5 5
1’
20 20 20 16 16 16
9 8
2’
45 45 45 36 34 36
2722 27
27 25 20 15 11 9
3’
57 57 57 45 45 45
3429 34
22 19 15 12
1310 13
29 27 22 18 13 10
4’
64 64 64 50 50 50
3633 36
28 25 21 18 14 10
5’
65 65 65 51 51 51
3634 36
24 23 20 18 13 11
6’
61 61 61 48 48 48
3333 33
20 19 18 16 13 11
7’
55 56 55 44 44 44
3030 30
16 16 15 14 12 11
8’
48 48 48 38 38 38
2626 26
14 13 13 12 11 9
9’
42 43 42 34 34 34
2323 23
* Based on minimum of five luminaires. Reflectances: 80, 50, 20. Values are rounded to nearest whole footcandle.
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: M8W-ED-100E
Rough-In
Example: M800WD-CL
Wattage/Lamp
Options
M8-ED
Single WW
M8W-ED
Corner &
Double
Wall Wash
Reflector
50E120
50W ED17 Coated Protected
MH, 120V Electronic
50E277
50W ED17 Coated Protected
MH, 277V Electronic
Color Options
Reflector
Example: HB-TL
Finish
347 347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
†CP Chicago Plenum
†SW Lamp Sensing Switch
M800WS
Single WW
M800WD
Double WW
M800WC
Corner WW
Options
C Clear
GGold
WT Wheat
PT Pewter
BZBronze
W White
Low Iridescent
Alzak® Finishes:
L
Specular
S
Satin
Blank for white
WH White Flange
70E
70W ED17 Coated Protected
MH, 120/277V Electronic
100E
100W ED17 Coated Protected
MH, 120/277V Electronic
150E120
150W ED17 Coated Protected
MH, 120V Electronic
94
Accessories
-
150E277
150W ED17 Coated Protected
MH 277V Electronic
† Consult Factory for Availability
HB-TL
HB-52
HB-28
LB-27
25”
52”
28”
27”
Tru-Lock grid ceiling bar hangers, Pair
C-Channel Bar Hangers, Pair
C-Channel Bar Hangers, Pair
Linear Bar Hangers, Pair
Visit our website for more information, junolightinggroup.com
95
CMH
Cylinder
Fixtures
Indy CMH cylinders are one of the most versatile fixture styles
in the line. Cylinders can be either open or shielded with tempered glass, the latter being ideal for food preparation areas.
Multiple optic solutions suit a wide variety of applications
including downlighting, wall washing, and high ceiling environments. And they can be surface, pendant or wall mounted.
Ceramic metal halide technology reduces energy consumption
and relamping costs.
Indy CMH cylinders have sturdy aluminum exterior housings
finished in black or white (special order custom colors also
available). Reflectors are available in a variety of attractive
colors, and low iridescent finishes eliminate “rainbowing.”
Indy CMH Cylinder features:
• Ceramic metal halide lamps save energy and reduce
relamping costs.
• Computer designed reflectors offer low brightness, high
efficiency.
• Versatile cylinders are available in open and lensed
versions and suit a variety of applications including
downlighting and wall washing.
• Low iridescent finishes eliminate “rainbowing.”
• Magnetic HPF ballast, core and coil style with Class H
insulation, and 120/277 volt input.
• Hinged reveal allows single person installation.
• UL/C-UL Listed.
• A host of options and accessories enhances both
functionality and versatility.
• Surface, pendant or wall mounted.
• Black or white exterior finish (custom colors available),
plus a variety of attractive reflector colors.
Visit our website for more information, junolightinggroup.com
97
9” par38 vertical cmh downlight cylinder
Open aperture, magnetic ballast
1"
1"
3 1/8"
17 1/2"
17 1/2"
8 3/4"
17 1/2"
6 5/8"
7 3/8" Dia.
Open
7 3/8" Dia.
Open
7 3/8" Dia.
Open
9"
Surface Mount
9"
Pendant Mount
9"
Wall Mount
product specifications
OPEN REFLECTOR (70W par38)
OPEN BAFFLE (100W PAR38)
Reflector: Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter or bronze; other finishes available upon request
Catalog Number: 9-P3870MW-CL
Test Number: PR08952801
Total Luminaire Efficiency: 95.4%
Luminaire Spacing Criteria: 0.51
Lamps: One (1) philips CDM70/PAR38/FL, rated at
4700 lumens.
Catalog Number: 9-P38100MW-CL
Test Number: PR09921501
Total Luminaire Efficiency: 89.8%
Luminaire Spacing Criteria: 0.63
Lamps: One (1) MP100PAR38/U/FL35, rated at 5500
lumens.
Baffle: Specular clear Alzak® upper reflector and white or black painted deep multigroove aluminum baffle insert
Ballast: 120/277 Volt dual tap primary
core and coil, high power factor, insulation class “H” 180°C, reliable starting to
-30°C. Includes capacitor and igniter (where
required)
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell
Housing: One piece heavy gauge aluminum
with white or black baked
textured powder coat finish
Mounting: Available for surface, pendant or
wall mounting • Pendant mounting features
hang straight pendant mounting kits that
allows for mounting on to sloped ceiling with
an angle up to 45° • Hinged reveal allows
single person installation
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
140
8’ x 8’
79
10’ x 10’
50
12’ x 12’
35
Candlepower
Distribution
Candlepower
Distribution
(Candelas)
Angle
Candela
0° 13536
5° 12788
15° 7017
25° 1999
35° 456
45°
70
55°
11
65°
0
75°
0
85°
0
(Candelas)
Angle
Candela
0° 10345
5° 10092
15° 6911
25° 2935
35° 842
45° 134
55°
29
65°
3
75°
0
85°
0
Footcandles
Dist.@ Center@ Edge Dia.
6’376 1683.3’
7’276 1243.9’
8’212 95 4.4’
9’167 75 5.0’
10’135 61 5.5’
11’112 50 6.1’
12’94 42 6.7’
13’80 36 7.2’
14’69 31 7.8’
15’60 27 8.3’
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
153
8’ x 8’
86
10’ x 10’
55
12’ x 12’
38
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: 9P-P38100MW-CL
9
Surface
Mount
9P
Pendant
Mount
9B
Wall
Mount
98
Example: P18-W
Wattage/Lamp
Rough-In
Reflector Color/Finish
P3870MW1
70W PAR38 MH, 120/277V
Magnetic, White
P38100MW1
100W PAR38 MH, 120/277V
Magnetic, White
P38150MW1
150PAR38MH,120/277VMagnetic,
White
Options
Accessories
3
347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
PD Pull Down Adjustable
A
Internally Adjustable
WL Spread Lens Wall
Wash
P18-W 18” Hang Straight Pendant Mounting Kit, White
P18-B 18” Hang Straight Pendant Mounting Kit,
Black
P24-W 24” Hang Straight Pendant Mounting Kit,
White
P24-B 24” Hang Straight Pendant Mounting Kit, Black
P36-W 36” Hang Straight Pendant Mounting Kit,
White
P36-B 36” Hang Straight Pendant Mounting Kit,
Black
(45° max ceiling slope for all pendant kits)
CL
CS
GL
GS
BB
WB
Clear Alzak® Specular
Clear Alzak® Satin
Gold Alzak® Specular
Gold Alzak® Satin
Black Baffle
White Baffle
1
Replace “W” with “B” for Black
Footcandles
Dist.@ Center@ Edge Dia.
6’287 1214.2’
7’211 89 4.9’
8’162 68 5.6’
9’128 55 6.3’
10’103 43 7.0’
11’86 36 7.7’
12’72 30 8.4’
13’61 26 9.1’
14’53 22 9.9’
15’46 1910.6’
12” par38 vertical cmh downlight cylinder
open aperture, magnetic ballast
1"
1"
10 3/4"
3 1/8"
21 5/8"
21 5/8"
21 5/8"
6 5/8"
11" Dia.
Open
11" Dia.
Open
11" Dia.
Open
12"
Surface Mount
12"
Pendant Mount
12"
Wall Mount
product specifications
OPEN REFLECTOR (70W par38)
OPEN BAFFLE (100W par38)
Reflector: Low iridescent specular or satin
Alzak® .050” thick reflector in clear, gold,
wheat, pewter or bronze with integral flange
of same finish; other finishes available upon
request
Catalog Number: 12-P3870MW-CL
Test Number: PR08952801
Total Luminaire Efficiency: 95.4%
Luminaire Spacing Criteria: 0.51
Lamps: One (1) philips CDM70/PAR38/FL, rated at
4700 lumens.
Catalog Number: 12-P38100MW-CL
Test Number: PR09921501
Total Luminaire Efficiency: 89.8%
Luminaire Spacing Criteria: 0.63
Lamps: One (1) MP100PAR38/U/FL35, rated 5500
lumens.
Baffle: Specular clear Alzak® upper reflector and black painted deep multi-groove aluminum baffle rolled into base of reflector
Ballast: 120/277 Volt dual tap primary
core and coil, high power factor, insulation class “H” 180°C, reliable starting to
-30°C. Includes capacitor and igniter (where
required)
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell
Housing: One piece heavy gauge aluminum
with white or black baked textured powder
coat finish
Mounting: Available for surface, pendant or
wall mounting • Pendant mounting features
hang straight pendant mounting kits that
allows for mounting on to sloped ceiling with
an angle up to 45° • Hinged reveal allows
single person installation
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
140
8’ x 8’
79
10’ x 10’
50
12’ x 12’
35
Candlepower
Distribution
Candlepower
Distribution
(Candelas)
Angle
Candela
0° 13536
5° 12788
15° 7017
25° 1999
35° 456
45°
70
55°
11
65°
0
75°
0
85°
0
(Candelas)
Angle
Candela
0° 10345
5° 10092
15° 6911
25° 2935
35° 842
45° 134
55°
29
65°
3
75°
0
85°
0
Footcandles
Dist.@ Center@ Edge Dia.
6’376 1683.3’
7’276 1243.9’
8’211 95 4.4’
9’167 75 5.0’
10’135 61 5.5’
11’112 50 6.1’
12’94 42 6.7’
13’80 36 7.2’
14’69 31 7.8’
15’60 27 8.3’
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
153
8’ x 8’
86
10’ x 10’
55
12’ x 12’
38
Footcandles
Dist.@ Center@ Edge Dia.
6’287 1214.2’
7’211 89 4.9’
8’162 68 5.6’
9’128 54 6.3’
10’103 43 7.0’
11’86 36 7.7’
12’72 30 8.4’
13’61 26 9.1’
14’53 22 9.9’
15’46 1910.6’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: 12P-P38100MW-CL
-
1
Reflector Color/Finish
P3870MW1
70W PAR38 MH, 120/277V
Magnetic, White
P38100MW1
100W PAR38 MH, 120/277V
Magnetic, White
P38150MW1
150W PAR38 MH, 120/277V
Magnetic, White
Replace “W” with “B” for Black
Options
Accessories
3
347 Volt
***F Fuse and Fuse Holder
(Where *** = voltage)
PD Pull Down Adjustable
A
Internally Adjustable
WL Spread Lens Wall
Wash
P18-W 18” Hang Straight Pendant Mounting Kit, White
P18-B 18” Hang Straight Pendant Mounting Kit,
Black
P24-W 24” Hang Straight Pendant Mounting Kit,
White
P24-B 24” Hang Straight Pendant Mounting Kit, Black
P36-W 36” Hang Straight Pendant Mounting Kit,
White
P36-B 36” Hang Straight Pendant Mounting Kit,
Black
(45° max ceiling slope for all pendant kits)
CL
CS
GL
GS
BB
Clear Alzak® Specular
Clear Alzak® Satin
Gold Alzak® Specular
Gold Alzak® Satin
Black Baffle
CYLINDERS
12
Surface
Mount
12P
Pendant
Mount
12B
Wall
Mount
Example: P18-W
Wattage/Lamp
Rough-In
99
9” ed17 vertical cmh downlight cylinder
Open aperture, magnetic ballast
1"
1"
3 1/8"
17 1/2"
17 1/2"
8 3/4"
17 1/2"
6 5/8"
7 3/8" Dia.
Open
7 3/8" Dia.
Open
7 3/8" Dia.
Open
9"
Surface Mount
9"
Pendant Mount
9"
Wall Mount
product specifications
OPEN REFLECTOR (100W ED-17)
Reflector: Precision reflector with 50° visual
cut-off to both lamp and lamp image • Low
iridescent specular or satin Alzak® .050”
thick reflector in clear, gold, wheat, pewter or
bronze; other finishes available upon request
Catalog Number: 9-ED100MW-CL
Test Number: ITL39368P
Total Luminaire Efficiency: 55.5%
Luminaire Spacing Criteria: 0.76
Lamps: One (1) phosphor coated 100Watt medium
base ED-17, rated at 8000 lumens.
Baffle: Specular clear Alzak® upper reflector
and white or black painted deep multi-groove
aluminum baffle insert
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
Ballast: 120/277 Volt dual tap primary core
and coil, high power factor, insulation class
“H” 180°C, reliable starting to -30°C. Includes
capacitor and igniter (where required)
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell • Socket prevents the use of metal halide
lamps that are not “open fixture” rated
Housing: One piece heavy gauge aluminum
with white or black baked textured powder
coat finish
Mounting: Available for surface, pendant or
wall mounting • Pendant mounting features
hang straight pendant mounting kits that
allows for mounting on to sloped ceiling with
an angle up to 45° • Hinged reveal allows
single person installation
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without
notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
138
8’ x 8’
78
10’ x 10’
50
12’ x 12’
34
5961
5637
4543
2873
1604
238
7
4
0
0
Footcandles
Dist.@ Center@ Edge Dia.
6’166 63 5.4’
7’122 46 6.4’
8’93 357.3’
9’74 288.2’
10’60 23 9.1’
11’49 1910.0’
12’41 1610.9’
13’35 1311.8’
14’30 1212.7’
15’27 1013.6’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: 9P-ED100MW-CL
9
Surface
Mount
9P
Pendant
Mount
9B
Wall
Mount
100
Example: P18-W
Wattage/Lamp
Rough-In
Reflector Color/Finish
ED50MW1
50W ED17 Coated Protected MH,
120/277V Magnetic, White
ED70MW1
70W ED17 Coated Protected MH,
120/277V Magnetic, White
ED100MW1
100W ED17 Coated Protected MH,
120/277V Magnetic, White
ED150MW1
150W ED17 Coated Protected MH,
120/277V Magnetic, White
Options
Accessories
CL
CS
GL
GS
BB
Clear Alzak® Specular
Clear Alzak® Satin
Gold Alzak® Specular
Gold Alzak® Satin
Black Baffle
3
347 Volt
P18-W 18” Hang Straight Pendant Mounting Kit, ***F Fuse and Fuse Holder
White
(Where *** = voltage) P18-B 18” Hang Straight Pendant Mounting Kit,
Q
Quartz restrike with hot Black
start auxiliary control
P24-W 24” Hang Straight Pendant Mounting Kit,
White
P24-B 24” Hang Straight Pendant Mounting Kit, Black
P36-W 36” Hang Straight Pendant Mounting Kit,
White
P36-B 36” Hang Straight Pendant Mounting Kit,
Black
(45° max ceiling slope for all pendant kits)
1
Replace “W” with “B” for Black
9” ed17 vertical cmh downlight cylinder
enclosed aperture, magnetic ballast
1"
1"
3 1/8"
17 1/2"
8 3/4"
17 1/2"
17 1/2"
6 5/8"
7 3/8" Dia.
Open
7 3/8" Dia.
Open
7 3/8" Dia.
Open
9"
Surface Mount
9"
Pendant Mount
9"
Wall Mount
product specifications
OPEN REFLECTOR (100W ED-17)
OPEN BAFFLE (100W ED-17)
Lower Cone: Regressed aluminum cone •
Low iridescent specular or satin Alzak® cone
in clear, gold, wheat, pewter, bronze or painted white; other finishes available upon request
Catalog Number: 9-EDS100MW-CL-CG
Test Number: ITL33264
Total Luminaire Efficiency: 61.5%
Luminaire Spacing Criteria: 1.10
Lamps: One (1) phosphor coated 100Watt medium
base ED-17, rated at 8000 lumens.
Catalog Number: 9-EDS100MW-BB-CG
Test Number: PR05910701
Total Luminaire Efficiency: 46.6%
Luminaire Spacing Criteria: 0.92
Lamps: One (1) phosphor coated 100Watt ED-17
medium base metal halide, rated at 8000 lumens.
Baffle: White or black painted deep multigroove aluminum baffle insert
Reflector: .050” aluminum upper reflector
with clear Alzak® finish
Lens: Tempered Prismatic or Fresnel glass
Ballast: 120/277 Volt dual tap primary core
and coil, high power factor, insulation class
“H” 180°C, reliable starting to -30°C. Includes
capacitor and igniter (where required)
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell
Housing: One piece heavy gauge aluminum
with white or black baked textured powder
coat finish
Mounting: Available for surface, pendant or
wall mounting • Pendant mounting features
hang straight pendant mounting kits that
allows for mounting on to sloped ceiling with
an angle up to 45° • Hinged reveal allows
single person installation
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without
notice.
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
151
8’ x 8’
85
10’ x 10’
54
12’ x 12’
38
Candlepower
Distribution
Candlepower
Distribution
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
(Candelas)
Angle
Candela
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
3277
3297
3563
3483
1962
793
173
11
4
0
Footcandles
Dist.@ Center@ Edge Dia.
6’91 268.9’
7’ 67 1910.4’
8’ 51 1511.8’
9’ 41 1113.3’
10’33 9 14.8’
11’27 8 16.3’
12’23 6 17.8’
13’19 6 19.2’
14’17 5 20.7’
15’15 4 22.2’
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
113
8’ x 8’
64
10’ x 10’
41
12’ x 12’
28
3604
3764
3910
2566
1208
364
38
0
0
0
Footcandles
Dist.@ Center@ Edge Dia.
6’100 36 6.8’
7’74 267.9’
8’56 209.1’
9’ 45 1610.2’
10’36 1311.3’
11’30 1112.5’
12’25 9 13.6’
13’21 8 14.7’
14’18 7 15.8’
15’16 6 17.0’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: 9P-EDS100MB-CL-CG
-
1
Cone Color/Finish
EDS50MW1
50W ED17
Coated non-protected
MH, 120/277V Magnetic, White
EDS70MW1
70W ED17
Coated non-protected
MH, 120/277V Magnetic, White
EDS100MW1
100W ED17
Coated non-protected
MH, 120/277V Magnetic, White
EDS150MW1
150W ED17
Coated non-protected
MH, 120/277V Magnetic, White
Replace “W” with “B” for Black
Lens Type
CL
CS
GL
GS
BB
WB
W
Clear Alzak® Specular
Clear Alzak® Satin
Gold Alzak® Specular
Gold Alzak® Satin
Black Baffle
White Baffle
White Painted Cone
Options
Accessories
CG Clear Glass
PG Prismatic Glass
FG Fresnel Glass (Lens is required)
P18-W 18” Hang Straight Pendant Mounting Kit, 3
347 Volt
White
***F Fuse and Fuse Holder
P18-B
18” Hang Straight Pendant Mounting Kit,
(Where *** = voltage)
Q
Quartz restrike with hot Black
P24-W 24” Hang Straight Pendant Mounting Kit,
start auxiliary control
White
P24-B 24” Hang Straight Pendant Mounting Kit, Black
P36-W 36” Hang Straight Pendant Mounting Kit,
White
P36-B 36” Hang Straight Pendant Mounting Kit,
Black
(45° max ceiling slope for all pendant kits)
CYLINDERS
9
Surface
Mount
9P
Pendant
Mount
9B
Wall
Mount
Example: P18-W
Wattage/Lamp
Rough-In
101
12” ed17 or bt/ed28 vertical cmh downlight cylinder
open aperture, magnetic ballast
1"
1"
10 3/4"
3 1/8"
21 5/8"
21 5/8"
21 5/8"
11" Dia.
Open
11" Dia.
Open
11" Dia.
Open
12"
Surface Mount
12"
Pendant Mount
12"
Wall Mount
product specifications
OPEN REFLECTOR (150W ED-17)
Reflector: Precision reflector with 50° visual
cut-off to both lamp and lamp image • Low
iridescent specular or satin Alzak® .050”
thick reflector in clear, gold, wheat, pewter
or bronze with integral flange of same finish;
other finishes available upon request
Baffle: Specular clear Alzak® upper reflector
with black painted deep multi-groove aluminum baffle rolled into base of reflector
Ballast: 120/277 Volt dual tap primary core
and coil, high power factor, insulation class
“H” 180°C, reliable starting to -30°C. Includes
capacitor and igniter (where required)
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell • Socket prevents the use of metal halide
lamps that are not “open fixture” rated
Housing: One piece heavy gauge aluminum
with white or black baked textured powder
coat finish
Mounting: Available for surface, pendant or
wall mounting • Pendant mounting features
hang straight pendant mounting kits that
allows for mounting on to sloped ceiling with
an angle up to 45° • Hinged reveal allows
single person installation
Labels and Listings
UL/C-UL listed for feed through and damp locations • I.B.E.W. Union made
Product specifications subject to change without
notice.
Catalog Number: 12-ED150M-CL
Test Number: PR11951807
Total Luminaire Efficiency: 70.1%
Luminaire Spacing Criteria: 0.87
Lamps: One (1) 150Watt ED-17 metal halide lamp,
rated at 13500 lumens.
Candlepower
Distribution
(Candelas)
Angle
Candela
0° 11142
5° 11419
15° 11770
25° 7108
35° 2733
45°
44
55°
7
65°
2
75°
0
85°
0
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing RCR1
6’ x 6’
293
8’ x 8’
165
10’ x 10’
105
12’ x 12’
73
Footcandles
Dist.@ Center@ Edge Dia.
6’310 1136.3’
7’227 83 7.4’
8’174 64 8.4’
9’138 50 9.5’
10’111 41 10.5’
11’92 3411.6’
12’77 2812.6’
13’66 2413.7’
14’57 2114.8’
15’50 1815.8’
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: 12P-ED100MW-CL
12
Surface
Mount
12P
Pendant
Mount
12B
Wall
Mount
102
Example: P18-W
Wattage/Lamp
Rough-In
Reflector Color/Finish
ED50MW1
50W ED17 Coated Protected MH,
White, 120/277V Magnetic
ED70MW1
70W ED17 Coated Protected MH,
White, 120/277V Magnetic
ED100MW1
100W ED17 Coated Protected MH,
White, 120/277V Magnetic
ED150MW1
150W ED17 Coated Protected MH,
White, 120/277V Magnetic
ED175MW1
175W BT/ED28 Coated Protected
MH, White, 120/277V Magnetic
ED250MW1
250W BT/ED28 Coated Protected
MH, White 120/277V Magnetic
Options
Accessories
CL
CS
GL
GS
BB
Clear Alzak® Specular
Clear Alzak® Satin
Gold Alzak® Specular
Gold Alzak® Satin
Black Baffle
6 5/8"
3
347 Volt
P18-W 18” Hang Straight Pendant Mounting Kit, ***F Fuse and Fuse Holder
White
(Where *** = voltage) P18-B 18” Hang Straight Pendant Mounting Kit,
Q
Quartz restrike with hot Black
start auxiliary control
P24-W 24” Hang Straight Pendant Mounting Kit,
WS Single Wall Wash White
(ED17 only)
P24-B 24” Hang Straight Pendant Mounting Kit, Black
P36-W 36” Hang Straight Pendant Mounting Kit,
White
P36-B 36” Hang Straight Pendant Mounting Kit,
Black
(45° max ceiling slope for all pendant kits)
1
Replace “W” with “B” for Black
12” ed17 or bt/ed28 vertical cmh downlight cylinder
enclosed aperture, magnetic ballast
1"
1"
10 3/4"
3 1/8"
21 5/8"
21 5/8"
21 5/8"
6 5/8"
11" Dia.
Open
11" Dia.
Open
11" Dia.
Open
12"
Surface Mount
12"
Pendant Mount
12"
Wall Mount
product specifications
OPEN REFLECTOR (250W BT-28)
Reflector: Precision reflector with 50° visual
cut-off to both lamp and lamp image • Low
iridescent specular or satin Alzak® .050”
thick reflector in clear, gold, wheat, pewter
or bronze with integral flange of same finish;
other finishes available upon request
Catalog Number: 12-EDS250MW-CL-CG
Test Number: PR09952805
Total Luminaire Efficiency: 55.5%
Luminaire Spacing Criteria: 0.76
Lamps: One (1) 250WATT BT-28 metal halide lamp,
rated at 22000 lumens.
Candlepower
Distribution
Lens: Tempered clear glass lamp shield
provided
(Candelas)
Angle
Candela
0° 8341
5° 8583
15° 10159
25° 9765
35° 6136
45° 2295
55° 256
65°
39
75°
0
85°
0
Ballast: 120/277 Volt dual tap primary
core and coil, high power factor, insulation class “H” 180°C, reliable starting to
-30°C. Includes capacitor and igniter (where
required)
Lamp Holder: Medium base heavy duty 4Kv
porcelain socket with nickel plated brass screw
shell
Housing: One piece heavy gauge aluminum
with white or black baked textured powder
coat finish
Mounting: Available for surface, pendant or
wall mounting • Pendant mounting features
hang straight pendant mounting kits that
allows for mounting on to sloped ceiling with
an angle up to 45° • Hinged reveal allows
single person installation
Footcandles
Dist.@ Center@ Edge Dia.
6’232 70 9.3’
7’170 5110.8’
8’130 3912.4’
9’103 3113.9’
10’83 2515.5’
11’69 2117.0’
12’58 1718.6’
13’49 1520.1’
14’43 1121.7’
15’37 9 23.2’
AVERAGE INITIAL
FOOTCANDLES
Reflectances: 80%
Ceiling, 50% Walls,
30% Floors
Luminaire
Spacing
RCR1
6’ x 6’
428
8’ x 8’
241
10’ x 10’
154
12’ x 12’
107
Labels and Listings
UL/C-UL listed for feed through and damp
locations • I.B.E.W. Union made
Product specifications subject to change without notice.
ORDERING INFORMATION: Rough-in, reflector and accessories each ordered separately.
Example: 12P-EDS100MB-CL-CG
-
1
Reflector Color/Finish
EDS50MW1
CL
50W ED17 Coated Non-Protected MH, White, 120/277V Magnetic CS
EDS70MW1
GL
70W ED17 Coated Non-Protected MH, White, 120/277V Magnetic GS
1
EDS100MW
100W ED17 Coated Non-Protected MH, White, 120/277V Magnetic
EDS150MW1
150W ED17 Coated Non-Protected MH, White, 120/277V Magnetic
EDS175MW1
175W BT/ED28 Coated Non-Protected MH, White, 120/277V Magnetic
EDS250MW1
250W BT/ED28 Coated Non-Protected MH, White 120/277V Magnetic
Replace “W” with “B” for Black
Lens Type
Clear Alzak® Specular
Clear Alzak® Satin
Gold Alzak® Specular
Gold Alzak® Satin
Options
Accessories
Clear Glass (Lens is required)
CG
3
347 Volt
P18-W 18” Hang Straight Pendant Mounting Kit, ***F Fuse and Fuse Holder
White
(Where *** = voltage) P18-B 18” Hang Straight Pendant Mounting Kit,
Q
Quartz restrike with hot Black
start auxiliary control
P24-W 24” Hang Straight Pendant Mounting Kit,
White
P24-B 24” Hang Straight Pendant Mounting Kit, Black
P36-W 36” Hang Straight Pendant Mounting Kit,
White
P36-B 36” Hang Straight Pendant Mounting Kit,
Black
(45° max ceiling slope for all pendant kits)
103
CYLINDERS
12
Surface
Mount
12P
Pendant
Mount
12B
Wall
Mount
Example: P18-W
Wattage/Lamp
Rough-In
New from
Indy
MR16
SuperMini T4
MiniMasterColor®
(GX10 Twist-Lock) (GU6.5 Twist-Lock) (PGJ5 Twist-Lock)
Designer
Cove
Designer
Cove (trimless)
T4/T4.5
(G8.5 Bi-Pin)
T6
(G12 Bi-Pin)
1, 2, 3 lamp
20W
1, 2, 3 lamp
20W
1, 2, 3 lamp
20W
1, 2, 3 lamp
20W, 39W, 70W
1, 2, 3 lamp
39W, 70W
1, 2, 3 lamp
20W
1, 2, 3 lamp
20W
1, 2, 3 lamp
20W
1, 2, 3 lamp
20W, 39W, 70W
1, 2, 3 lamp
39W, 70W
2, 3 lamp
20W
2, 3 lamp
20W
2, 3 lamp
20W
2, 3 lamp
20W, 39W, 70W
2, 3 lamp
39W, 70W
4”
20W
4”, 6”
20W
4”, 6”
20W
4”, 6”
20W, 39W, 70W
4”
39W, 70W
6”, 8”
39W, 70W, 150W
4”
20W
4”, 6”
20W
4”, 6”
20W
4”, 6”
20W, 39W, 70W
4”
39W, 70W
6”, 8”
39W, 70W, 150W
Multi-Spot
AVIO
(Recessed)
AVIO
(Surface
Mount)
1,2, 3, 4 lamp
linear and
quad 20W
1,2, 3, 4 lamp
linear and
quad 20W
Adjustables
Downlights
8”
39W, 70W, 150W
Dura-Life
Spread Lens
6”
20W
6”
20W
See inside front cover for page index of the entire Indy Performance Series CMH offering.
104
6”
20W, 39W, 70W
6”, 8”
39W, 70W, 150W
Product Index
Multi-Lamp Accent Lighting
DCT4 . . . . . . . . . . . . . . . . . . . . . . . . . . .
DCTM. . . . . . . . . . . . . . . . . . . . . . . . . . .
DCBT . . . . . . . . . . . . . . . . . . . . . . . . . . .
DCT4 (trimless) . . . . . . . . . . . . . . . . . . . . .
DCTM (trimless) . . . . . . . . . . . . . . . . . . . .
DCBT (trimless). . . . . . . . . . . . . . . . . . . . .
MST4 . . . . . . . . . . . . . . . . . . . . . . . . . . .
MSTM. . . . . . . . . . . . . . . . . . . . . . . . . . .
MSBT . . . . . . . . . . . . . . . . . . . . . . . . . . .
DCT6. . . . . . . . . . . . . . . . . . . . . . . . . . . .
DCT6 (trimless). . . . . . . . . . . . . . . . . . . . .
MST6. . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC161 . . . . . . . . . . . . . . . . . . . . . . . . . .
DC162. . . . . . . . . . . . . . . . . . . . . . . . . . .
DC163 . . . . . . . . . . . . . . . . . . . . . . . . . .
DC161 (trimless) . . . . . . . . . . . . . . . . . . . .
DC162 (trimless). . . . . . . . . . . . . . . . . . . .
DC163 (trimless) . . . . . . . . . . . . . . . . . . . .
MS162 . . . . . . . . . . . . . . . . . . . . . . . . . .
MS163. . . . . . . . . . . . . . . . . . . . . . . . . . .
XR16101. . . . . . . . . . . . . . . . . . . . . . . . .
XR16201. . . . . . . . . . . . . . . . . . . . . . . . .
XR16301. . . . . . . . . . . . . . . . . . . . . . . . .
XR16401. . . . . . . . . . . . . . . . . . . . . . . . .
XR16404. . . . . . . . . . . . . . . . . . . . . . . . .
DC201 . . . . . . . . . . . . . . . . . . . . . . . . . .
DC202 . . . . . . . . . . . . . . . . . . . . . . . . . .
DC203 . . . . . . . . . . . . . . . . . . . . . . . . . .
DC301 . . . . . . . . . . . . . . . . . . . . . . . . . .
DC302 . . . . . . . . . . . . . . . . . . . . . . . . . .
DC303 . . . . . . . . . . . . . . . . . . . . . . . . . .
DC381 . . . . . . . . . . . . . . . . . . . . . . . . . .
DC382 . . . . . . . . . . . . . . . . . . . . . . . . . .
DC383 . . . . . . . . . . . . . . . . . . . . . . . . . .
MS302 . . . . . . . . . . . . . . . . . . . . . . . . . .
MS303 . . . . . . . . . . . . . . . . . . . . . . . . . .
MS120 . . . . . . . . . . . . . . . . . . . . . . . . . .
Dura-Life
14
14
14
15
15
15
16
16
16
17
18
19
20
20
20
21
21
21
22
22
23
23
23
23
23
24
24
24
25
25
25
25
25
25
26
26
27
Adjustable Accent Lighting
M4A-T4 (Low Glare). . . . . . . . . . . . . . . . .
M4A-TM (Low Glare). . . . . . . . . . . . . . . . .
M4A-BT (Low Glare) . . . . . . . . . . . . . . . . .
M6A-T4 (Low Glare). . . . . . . . . . . . . . . . . .
M6A-TM (Low Glare). . . . . . . . . . . . . . . . .
M6A-BT (Low Glare). . . . . . . . . . . . . . . . .
M4A-T6 (Low Glare). . . . . . . . . . . . . . . . .
M6A-T6 (Low Glare). . . . . . . . . . . . . . . . . .
M8A-T6 (Low Glare). . . . . . . . . . . . . . . . .
M4A-MR16 (Low Glare). . . . . . . . . . . . . . .
M4A-P20 (Low Glare) . . . . . . . . . . . . . . . .
M6A-P30 (Low Glare) . . . . . . . . . . . . . . . .
M6A-P38 (Low Glare) . . . . . . . . . . . . . . . .
M6A-P38 (Easy Adj) . . . . . . . . . . . . . . . . .
M8A-P30 (Low Glare) . . . . . . . . . . . . . . . .
M8A-P38 (Low Glare) . . . . . . . . . . . . . . . .
M8A-P38 (Easy Adj) . . . . . . . . . . . . . . . . .
30
30
30
31
31
31
32
33
34
35
36
37
37
38
39
39
40
Pulldown and Semi-Recessed
M6PD-P20 . . . . . . . . . . . . . . . . . . . . . . .
M6SR-P20. . . . . . . . . . . . . . . . . . . . . . . .
M8PD-P30 . . . . . . . . . . . . . . . . . . . . . . .
M8SR-P30. . . . . . . . . . . . . . . . . . . . . . . .
M8PD-P38 . . . . . . . . . . . . . . . . . . . . . . .
M8SR-P38. . . . . . . . . . . . . . . . . . . . . . . .
M8PD-ED. . . . . . . . . . . . . . . . . . . . . . . .
M8PD-EDS. . . . . . . . . . . . . . . . . . . . . . .
43
44
45
46
47
48
49
50
M8HD-T6. . . . . . . . . . . . . . . . . . . . . . . .
M9HD-EDS. . . . . . . . . . . . . . . . . . . . . . .
M12HD-EDS. . . . . . . . . . . . . . . . . . . . . .
9H2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9HP2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
9HB2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wall Wash
54
55
56
57
57
57
Recessed Open Downlights
M4-T4. . . . . . . . . . . . . . . . . . . . . . . . . . .
M4-TM . . . . . . . . . . . . . . . . . . . . . . . . . .
M4-BT. . . . . . . . . . . . . . . . . . . . . . . . . . .
M6-T4. . . . . . . . . . . . . . . . . . . . . . . . . . .
M6-TM. . . . . . . . . . . . . . . . . . . . . . . . . .
M6-BT. . . . . . . . . . . . . . . . . . . . . . . . . . .
M4-T6. . . . . . . . . . . . . . . . . . . . . . . . . . .
M6-T6. . . . . . . . . . . . . . . . . . . . . . . . . . .
M8-T6. . . . . . . . . . . . . . . . . . . . . . . . . . .
M4-MR16. . . . . . . . . . . . . . . . . . . . . . . .
M4-P20. . . . . . . . . . . . . . . . . . . . . . . . . .
M6-P30. . . . . . . . . . . . . . . . . . . . . . . . . .
M6-EDS . . . . . . . . . . . . . . . . . . . . . . . . .
M8-P30. . . . . . . . . . . . . . . . . . . . . . . . . .
M8-EDS . . . . . . . . . . . . . . . . . . . . . . . . .
MD8-P30 . . . . . . . . . . . . . . . . . . . . . . . .
MD8-P30/38. . . . . . . . . . . . . . . . . . . . . .
MD8-P38 . . . . . . . . . . . . . . . . . . . . . . . .
M6-ED . . . . . . . . . . . . . . . . . . . . . . . . . .
M8-ED . . . . . . . . . . . . . . . . . . . . . . . . . .
M9-ED . . . . . . . . . . . . . . . . . . . . . . . . . .
M10-ED (Electronic) . . . . . . . . . . . . . . . . .
M10-ED (Magnetic). . . . . . . . . . . . . . . . . .
M12-ED (Electronic) . . . . . . . . . . . . . . . . .
M12-ED (Magnetic). . . . . . . . . . . . . . . . . .
M12H-ED. . . . . . . . . . . . . . . . . . . . . . . .
60
60
60
61
61
61
62
63
64
65
66
67
67
68
68
69
69
69
70
71
72
73
74
75
76
77
Recessed Lenslite
M6-EDS . . . . . . . . . . . . . . . . . . . . . . . . .
M8-EDS . . . . . . . . . . . . . . . . . . . . . . . .
M10-EDS (Electronic). . . . . . . . . . . . . . . . .
M10-EDS (Magnetic). . . . . . . . . . . . . . . . .
M12-EDS (Electronic). . . . . . . . . . . . . . . . .
M12-EDS (Magnetic). . . . . . . . . . . . . . . . .
M12H-EDS (Electronic) . . . . . . . . . . . . . . .
M12H-EDS (Magnetic). . . . . . . . . . . . . . . .
78
79
80
81
82
83
84
85
M6AW-T4. . . . . . . . . . . . . . . . . . . . . . . .
M6AW-TM . . . . . . . . . . . . . . . . . . . . . . .
M6AW-BT. . . . . . . . . . . . . . . . . . . . . . . .
M6AW-T6. . . . . . . . . . . . . . . . . . . . . . . .
M8AW-T6. . . . . . . . . . . . . . . . . . . . . . . .
M6AW-P38. . . . . . . . . . . . . . . . . . . . . . .
M8AW-P38. . . . . . . . . . . . . . . . . . . . . . .
M6-ED . . . . . . . . . . . . . . . . . . . . . . . . . .
M6W-ED. . . . . . . . . . . . . . . . . . . . . . . . .
M8-ED . . . . . . . . . . . . . . . . . . . . . . . . . .
M8W-ED. . . . . . . . . . . . . . . . . . . . . . . . .
88
88
88
89
90
91
92
93
93
94
94
Cylinders
9 (PAR38) . . . . . . . . . . . . . . . . . . . . . . . . . 98
9P (PAR38) . . . . . . . . . . . . . . . . . . . . . . . . 98
9B (PAR38) . . . . . . . . . . . . . . . . . . . . . . . . 98
12 (PAR38) . . . . . . . . . . . . . . . . . . . . . . . . 99
12P (PAR38) . . . . . . . . . . . . . . . . . . . . . . . 99
12B (PAR38) . . . . . . . . . . . . . . . . . . . . . . . 99
9 (open ED17) . . . . . . . . . . . . . . . . . . . . . 100
9P (open ED17) . . . . . . . . . . . . . . . . . . . . 100
9B (open ED17) . . . . . . . . . . . . . . . . . . . . 100
9 (enclosed ED17). . . . . . . . . . . . . . . . . . . 101
9P (enclosed ED17). . . . . . . . . . . . . . . . . . 101
9B (enclosed ED17). . . . . . . . . . . . . . . . . . 101
12 (open ED17) . . . . . . . . . . . . . . . . . . . . 102
12P (open ED17) . . . . . . . . . . . . . . . . . . . 102
12B (open ED17) . . . . . . . . . . . . . . . . . . . 102
12 (enclosed ED17). . . . . . . . . . . . . . . . . . 103
12P (enclosed ED17). . . . . . . . . . . . . . . . . 103
12B (enclosed ED17). . . . . . . . . . . . . . . . . 103
1300 S. Wolf Road • P.O. Box 5065 • Des Plaines, IL 60017-5065
Phone 847.827.9880 • Fax 847.827.2457 • junolightinggroup.com
Regional Offices & Warehouses:
California, Georgia, Illinois, Indiana, Pennsylvania, Texas, Ontario CN
LIT-INDY-CMH
Products shown in this brochure are covered by
U.S. and international patents and patents pending
Specifications subject to change without notice.
© 2013 JUNO LIGHTING, LLC. ALL RIGHTS RESERVED.
Printed in the U.S.A.
LIT-INDY-CMH
REV. 05/13