PHOTOVOLTAIC MODULES MDT Series PV-MDT205HB PV-MDT200HB PV-MDT195HB 205Wp 200Wp 195Wp A New Premium Generation Advanced Technology 4 busbar monocrystalline cells Proprietary cell surface texturing process for greater light absorption Optimum tab thickness Highly reflective back film with wide cell pitch Lead-free solder connections Long Reliability Outstanding durability and protection against the elements allows the module to be installable even in high-saline areas* Passed IEC static load test of 5400Pa Frame has a protective double layer of corrosion-resistant coating 4-layer protective design junction box Highly heat-resistant diode *Excluding areas in which the module is directly exposed to salt water All models made in Japan Mitsubishi Electric Quality All of our photovoltaic modules, from the cell to the module, are made in our own factories in Japan Highly automated production lines ensure a stable level of high quality for every module Cells are matched for uniformity before module assembly Each pair of modules is selected to have a higher average output power than the nominal value. MITSUBISHI ELECTRIC PHOTOVOLTAIC MODULES SPECIFICATIONS SHEET Manufacturer Model name Cell type Number of cells MITSUBISHI ELECTRIC PV-MDT200HB Monocrystalline silicon, 156mm × 156mm 50 cells in a series PV-MDT205HB PV-MDT195HB Performance at STC Maximum power rating (Pmax) Warranted minimum Pmax Tolerance of maximum power rating Open circuit voltage (Voc) Short circuit current (Isc) Maximum power voltage (Vmp) Maximum power current (Imp) Normal operating cell temperature (NOCT) 205W 198.9W 200W 194.0W +/-3% 30.8V 8.60A 24.8V 8.07A 31.0V 8.73A 25.0V 8.20A 195W 189.2W 30.6V 8.48A 24.6V 7.94A 47˚C Performance at NOCT* Maximum power rating [Pmax] Open circuit voltage [Voc] Short circuit current [Isc] Maximum power voltage [Vmp] Maximum power current [Imp] 148W 28.2V 7.07A 22.5V 6.56A 144W 141W 28.0V 27.8V 6.96A 6.87A 22.3V 22.1V 6.46A 6.35A 1000V 15A 1658×834×46mm (65.3×32.8×1.81inches) 17kg (+) 800mm/(-) 1250mm with MC connector (PV-KTB4 / 6II-UR, PV-KST4 / 6II-UR) Cable conforms with TÜV Specification 2 PfG 1169/08.2007 14.8% 14.5% 14.1% 2 pcs / 1 carton IEC 61215 Second Edition, IEC 61730 Maximum system voltage Fuse rating Dimensions Weight Output terminal Module efficiency Packing condition Certificates 5 years Product Warranty Output Warranty 90% of minimum rated Pmax for 10 years 80% of minumum rated Pmax for 25 years *Measured at 800W/m2, ambient temp. 20˚C, wind speed 1m/s DRAWINGS AND DIMENSIONS 46 [1.81] 25.3 [1.00] 791 [31.1] 130 [5.12] 834 [32.8] 4 x ø4.09 (4 x ø0.16) 1000 [39.4] 1200 [47.2] 1658 [65.3] (+) 4 x ø9 (4 x ø0.35) 22 [0.87] 130 [5.12] (− ) Unit : mm [ inch ] 500 [19.7] ELECTRICAL CHARACTERISTICS Current-Voltage Power-Voltage 10 Temperature dependence of Isc, Voc and Pmax 140 240 9 1000 W / m2 800 W / m2 160 700 W / m2 Current (A) 6 600 W / m2 5 500 W / m2 4 400 W / m2 3 120 80 300 W / m2 200 W / m2 2 Normalized Isc, Voc and Pmax (%) 7 140 120 200 900 W / m2 Power (W) 8 120 Isc 100 Voc Pmax 80 60 40 40 20 0 0 Temp. Coeff. of Isc = +0.056%/ ℃ Temp. Coeff. of Voc = - 0.350%/ ℃ Temp. Coeff. of Pmax = - 0.450%/ ℃ 1 0 0 10 20 30 Voltage (V) 40 Irradiance dependence of Isc, Voc and Pmax (Cell temperature : 25℃ ) Case of PV-MDT200 HB -25 0 25 50 75 Normalized Isc Voc and Pmax (%) Electrical Performance (Cell temperature : 25℃ ) 100 Voc 80 60 40 Isc 20 100 0 Cell temperature ( ℃ ) Pmax 0 200 400 600 800 1000 1200 Irradiance (W/m2) HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN http: // www.mitsubishielectric.com / bu /solar/ L-175-0-B8720-B NK1107 Printed in Japan (MDOC) Revised Publication, effective Jul. 2011. Superseding Publication, L-175-0-B8720-A of Mar. 2011. Specifications subject to change without notice.