RECycler
®
312 A4
WORLD-LEADING WATER RECYCLING SYSTEM
· Jetting of water mains
· Removal of blockages
· Preventive cleaning
· Clearing of new sewers of construction gravel
· Clearing prior to camera inspection and relining
· Can also be used as all-round combi unit
www.hvidtved.com
RECycler®
TECHNICAL SPECIFICATIONS
Tank
Lights and reflectors
• 12 m water and/or sludge
• 5 LED work lamps
• Movable partition, which can be locked in two
pre-set positions. The partition is moved pneumatically
• 4 beacon lights
3
• 2 sets of locking bolts manually operated
• Fully automatic end cover hydraulically
operated. Including safety support
High-pressure unit
• Belt driven jetting pump
• 390 litres per minute at 140 bar
• One hydraulically operated hose reel with 150 m
5/4" jetting hose
• One hydraulically operated hose reel with 50 m
3/4" and 60 m 1/2" jetting hose, hydraulic swivel
• JHL RECycler System type B
Vacuum
• Vacuum pump, oil cooled, equipped with a lubrication pump
• 21.667 l/min., 90% vacuum
• Cassette system for 5" suction hose
Easy operation and positioning of the suction hose
and high-pressure hose. The cassette is mounted on
top of the tank in the full length of it. The hose is
pulled and drawn by means of a hydraulically
operated roller system mounted as an integrated
part of the cassette. The 5" suction hose may be lowered 8-10 m below surface. The end of the suction
hose is fitted with a coupling that allows different
equipment such as hose extensions, nozzles, etc. to
be connected to the suction hose.
Transmission
• PTO: Semi-hydraulic transmission via 2 power take-offs
Control
• 6 side lights with built-in reflectors
• Conspicutity marking according to FTA
Cabinets and shelves
• One double cabinet made of aluminium at the rear
end, left-hand side water dispenser for hand wash
facility
• Hose shelves and tool shelves with rails placed on
both sides
Finish
• Scania standard grey under carriage
• White cabin and tank
• Anodised cabinet and shelves
• One aluminium sign plate on each side
of the tank and one at the back of the tank
• Text and striping are ordered separately
Rear stear chassis
• Scania P410 CB 6 x 2*4 chassis supplied by JHL
• CP16 medium day cab
• One set of boogie mudguards made of plastic
• Cyclist protection bar on each side in aluminium
• Tail lights equipped with grilles for protection
• The exhaust pipe is led to the top
Accessories
• One nozzle set
• 4 x 4 meter 4" hoses incl Bauer couplings
• BUS-based PLC
Approvals
• Control panel
• JHL vehicles are approved by the Danish Directorate
One control panel is mounted at the back and one on
the side. Both in stainless steel and buttons with
English texts
www.hvidtved.com
of Labour Inspection before dispatch
• JHL vehicles are furnished with product liability
insurance
Efficient Water Recycling
WORLD-LEADING TECHNOLOGY
Continous recycling of jetting water
Automatic and easy to operate
STEP 1 – The hydraulically operated coarse filter mounted
on the end cover cleans the surface water from the sludge
tank. The coarse filter is fitted with a float, a spring loaded
cleaning scraper and an internal jetting boom.
STEP 2 – The hydraulically operated raw water pump
STEP 3 – Water cleaned by gravitational settlement.
STEP 4 – The water runs through a hydraulically operated
fine filter mounted in the front end of the tank. The fine
filter is fitted with a hydraulically operated cleaning brush
and a jetting boom.
sends the water to the hydro cyclones. The water is centrifuged in the cyclones to separate heavy solid particles. The
solids are continuously led back to the sludge tank.
STEP 5 – Traditional water filter mounted at the intake of
Flexible tank size
Efficient and economical
the high-pressure pump.
More than a finish
WE NEVER COMPROMISE - EVEN WHEN IT COMES TO THE
EXTERIOR
Your unit needs to operate for many years in the harshest of conditions in
existence. Therefore, surface treatment is much more than just looking good
- it’s going to protect the unit for years to come. At JHL, only the highest of
standards is high enough.
We begin by sandblasting all components - tank, pump, even the smallest
of details and then give them our own, extra thick and super strong surface
treatment. This protects your investment, and ensures its resale value for
years to come.
World class sewer cleaning units
FOUNDED IN 1915, FOR MORE THAN
50 YEARS JHL HAS SPECIALISED IN THE
DEVELOPMENT OF SEWER CLEANING
VEHICLES AND VACUUM LOADERS
JHL is your partner who helps grow your business and
we believe that the best results are achieved through
long-term relationships. Therefore we also have a
reliable service organisation that continuously helps
and supports you along the way and provides you
with full and comprehensive product training when
you receive your unit. Whatever your needs are, you
never feel alone when dealing with JHL.
Our in-depth knowledge of the industry combined
with technological curiosity plus a constant focus
on high quality putting us amongst the very top
manufacturers of sewer cleaning units.
At JHL you get a sewer cleaning unit that is built to
withstand hard, daily use, year after year giving you
maximum uptime and minimum fuel consumption,
keeping the environment clean whilst delivering
a healthy profit. We are constantly optimizing our
products and therefore your business.
It is in particular our consideration for the
environment that is a driving factor in our
product development, since water resources, fuel
consumption and CO2 emissions play an even greater
role in the world, and especially for our customers.
Sewer cleaning vehicles from J. Hvidtved Larsen
are found everywhere in the world – in the biggest
cities, in sparsely populated rural areas, in arctic
environments and in dusty deserts.
J. Hvidtved Larsen UK Ltd . Unit 1, Samson Road, Coalville . Leicestershire LE67 3FP . Tel: +44 1530 815687 . info@hvidtved.com
www.hvidtved.com