4 - Nicoll
advertisement
All our documents can be downloaded free of charge from: www.nicoll.fr 53 SAUL HYDRAULIC DRAINAGE CHANNELS ENVIRONMENT HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS VENTILATION ACCES TRAP DOOR BUILDING FASCIA AND ROOFING SOFFIT BOARDS ROOFING ACCESSORIES RAINGUTTERS SANITARY WASTES AND TRAPS GLUE SANITARY SANITARY DRAINAGE FITTINGS SANITARY NEW GENERATION WASTES & TRAPS WITH BUILT-IN SEALS Easyphon and Easybain use the new co-injection technology: the TPE seals and the PP trap body are injected simultaneously. A patented technology which provides exceptional benefits. • Reliable and safe to use thanks to built-in seals that are surprisingly elastic and durable. • Perfect and long-lasting seals: The connections are 100% watertight, the seals are always correctly positioned • A complete and NF-EN 274-certified range to equip washbasins, sinks and bathtubs. * Washbasin, sink Co-injection technology Easy to install «Adjust, tighten, done» Quick and easy maintenance «Remove, rinse, reassemble» Space-saving solution with the washbasin rear pipe Advantages: Ultra fast and long-lasting installation No need for additional work on the site after installation Catalog 4 A profitable and safe plumbing 54 References marked with * are DRAINAGE FITTINGS SANITARY GLUE SANITARY bathtub RAINGUTTERS Co-injection technology Connecting the trap to the pipe is made easier 5° directional outlet VENTILATION 70l/mn Choice of design for hand wheels and plugs The pre-assembled overflow can be extended or retracted by 20 cm (on the 650 mm version) The most compact trap on the market: including the NF-EN required 50 mm water seal height. 55 ENVIRONMENT The flow rate is 30 % higher than the NF EN 274 requirements, the best performance on the market. Flush-effect flow that makes it possible to clear out deposits and provide optimal drainage over time. HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS + 20 cm SAUL An outstanding trap in terms of flow rate and compactness BUILDING Simple and fast installation ACCES TRAP DOOR FASCIA AND ROOFING SOFFIT BOARDS 5° HYDRAULIC DRAINAGE CHANNELS Advantages: ROOFING ACCESSORIES Double-rotating 360° trap Watertightness ensured by the co-injected seals SANITARY WASTES AND TRAPS SANITARY Washbasin, bidet and urinal DESCRIPTION IN INDIVIDUAL PRINTED BAGS Ø REF. White REF. Grey Packing Packaging C-PVC WASHBASIN TRAPS - M1 Class Adjustable traps with nut (with seal) Single 32 1YF3CB S1 With anti-vacuum plug 32 1YF31CB S1 Vertical inlet 32 1YFECB S1 B-100 Vertical inlet 40 1YHECB S1 B-60 Vertical inlet 32 1YFCB YFC S1 B-100 Vertical inlet 40 1YHCB YHC S1 B-70 Vertical inlet 50 1YJCB YJC S1 32 1YF1CB YF1C S1 B-100 40 1YH1CB YH1C S1 B-70 50 1YJ1CB YJ1C S1 Single 40 1C34YB S1 With anti-vacuum plug 40 1C341YB S1 Single 40 1C34B S1 With anti-vacuum plug 40 1C341B S1 Single, 3.2 thick pipe 32 LF3B B-75 Single, 3.2 thick pipe 40 LH3B B-50 Bent socket 33/42 for swerved sink trap 32 DCF8SIPHB Trap with nut (with seal) 1YF3CB 1YHECB Trap to be glued 1YHCB YHC Horizontal inlet Use as U-traps Horizontal inlet 1YH1CB YH1C Horizontal inlet Adjustable bent outlet with trap (with seal) Adjustable bent outlet 1C341YB 1C34B Sink PVC outlet LH3B S1 DCF8SIPHB DID YOU KNOW ? C-PVC is a chlorinated PVC material. This increases the temperature at which the material softens and therefore improves resistance to high temperatures. Nicoll's C-PVC appliance traps are ideal to drain hightemperature waste fluids. DESCRIPTION Ø C-PVC BIDET TRAPS - M1 Class THE NICOLL EXTRA Catalog 4 Adjustable trap, with nut (with seal) 1YF4CB 56 32 REF. White 1YF4CB REF. Grey Packing Packaging S1 DRAINAGE FITTINGS Ø Water Adjustable seal height mm REF. Pac- Packaking ging PP WASHBASIN TRAPS - NF EN 274 SANITARY DESCRIPTION IN INDIVIDUAL PRINTED BAGS SANITARY Washbasin, bidet and urinal BM218 BM219 BM217 BM21S, Easyphon Ø 32 32 50 133-192 0201284* S1 60 BM242, Easyphon Ø 40 in shrunk packaging 40 50 133-192 0201283* F1 40 BM24S, Easyphon Ø 40 40 50 133-192 0201285* S1 60 BM19, Easyphon Ø 32 with washing-machine connection 32 50 177-222 0201302* S1 40 BM20, Easyphon Ø 40 with washing-machine connection 40 50 177-222 0201303* S1 30 C2921, Easyphon Ø 32 with wall outlet 32 50 133-192 0202073 S1 25 C2924, Easyphon Ø 40 with wall outlet 40 50 133-192 0202074 S1 25 C2919, Easyphon Ø 32 with connection for washing 32 machine and wall outlet pipe 239 mm 50 177-222 0201308 S1 45 BMT02, Easyphon Ø 32 with space-saving pipe 32 50 39-98+56 0202135* S1 35 BMT2P, BMT02 with Ø 32 wall outlet pipe 32 50 39-98+56 0202117 S1 35 BMT4P, BMT02 with Ø 40 wall outlet pipe 40 50 39-98+56 0202139 S1 35 BM217, Easyphon Ø 32 with waste & chain plug 32 50 50-100 0202123 S1 25 C2950, BM217 Ø 32 with wall outlet pipe (with ring plug) 32 50 50-100 0202122 S1 13 C2951, BM217 Ø 40 with wall pipe (with ring plug) 40 50 50-100 0202138 S1 25 BM218, BM217 Ø 32 without plug 32 50 50-100 0202121 S1 25 BM219, BM217 Ø 40 without plug 40 50 50-100 0202137 S1 25 L211, washbasin trap, outlet with conical seal 32 50 132-172 0201001* S1 40 L242, washbasin trap, outlet with conical seal 40 50 142-185 0201022* S1 30 C295P, 1" 1/4 x 32 mm bottle trap for bidet with wall outlet pipe 32 35 132-172 0202058 S1 75 CL217, plug combination and washbasin trap with chain plug Outlet 32 50 horizontal 0202001* S1 60 L442, S design, high flow rate, swivelling up to 360° 32 60 165-215 0201091 S1 LB221, conical seal 32 35 110-150 0201002 S1 40 L231, P design, conical seal, outlet with conical seal 32 12 non 0201015 S1 10 L261, P design, outlet with conical seal 40 12 non 0201020 S1 32 50 132-172 0201231 S1 40 32 40 50 153-245 0201241 S1 16 RAINGUTTERS 40 ROOFING ACCESSORIES F1 VENTILATION New ! 0201282* L211- L242 LB221 CL217 L231 - L261 Metallized plastic traps L211M L211M Designer plastic traps L311, ABS chrome L311 57 References marked with * are ENVIRONMENT L442 HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS Plastic traps 1" 1/4 x 32 mm or 1" 1/4 x 40 mm SAUL BMT02 133-192 FASCIA AND ROOFING SOFFIT BOARDS C2921 C2919 C2950 50 ACCES TRAP DOOR BM211 BM242 32 HYDRAULIC DRAINAGE CHANNELS BM19 BM20 BM211, Easyphon Ø 32 in shrunk packaging BUILDING Co-injection technology GLUE EASYPHON, trap with built-in seal, 1" 1/4 x 32 mm or 1" 1/4 x 40 mm SANITARY WASTES AND TRAPS SANITARY Washbasin, bidet and urinal IN INDIVIDUAL PRINTED BAGS DESCRIPTION Ø Water Adjustable height seal mm REF. Pac- Packaking ging WASHBASIN TRAPS Brass trap L2211 L3211 L345B L3450 L2231 L2311 50 133-204 0501022 B1 C2910EX, shiny chrome 32 75 133-202 0202000 B1 L2211, matt chrome 32 35 no 0501012 B1 L345B, shiny chrome, P design, high flow rate, with chromed rosette 32 60 110-135 0202081 B1 L3450, shiny chrome, P design, high flow rate, 32 with chromed rosette 60 140-190 0202026 B1 L2231, shiny chrome, P design 32 10 no 0501027 B1 25 L2311, bidet trap adjustable in height, shiny chrome 32 35 100-150 0501025 B1 25 C2910, L3211brass chrome bottle trap with wall outlet pipe 32 50 133-204 0202020 B1 30 32 50 140-200 0501141 B1 32 50 80-50 0501080 B1 32 12 55-100 0501140 B1 60 65-150 0202079 S1 25 25 L3560, square design, adjustable in height, inspectable base supplied with solvent weld connector L3520, cylindrical design, adjustable in height, inspectable base, solvent with weld fitting connector L3550, short design, adjustable in height, inspectable base, solvent with weld fitting connector Washbasin trap dedicated to disabled people DID YOU KNOW ? CPMR1 L3550 32 Design brass trap L3520 L3560 L3211, shiny chrome CPMR1, to be built-in, brass piping, wall cover 40&50 to reach the trap plug THE NICOLL EXTRA Ø Water seal Outlet REF. CU23, bottle trap for urinal, inlet Ø 70 mm, outlet Ø 40 mm Inlet 70 outlet 40 50 horizontal 0202109 S1 CU27, vertical trap to be concealed, inlet ØPRO 50 mm, outlet Ø 50 mm vertical or SELECTION horizontal, easy to clean, low thickness: 73 mm Inlet 50 outlet 50 50 «horizontal/ vertical» 0202131 S1 CU219, plug combination and trap for urinal, Inlet 50 outlet 32 Ø 60 mm domed grating 50 horizontal 0202006 * S1 DESCRIPTION Pac- Packaking ging URINAL TRAPS Plastic urinal combination CU23 CU219 CU27 35 CL217 DID YOU KNOW ? Catalog 4 To prevent a deterioration of the washbasin trap caused by wheelchairs, some buildings request a trap concealed in the wall. The trap for disabled people is easy to install using the installation accessories supplied. It is easy to inspect. 58 THE NICOLL EXTRA References marked with * are DRAINAGE FITTINGS Ø REF. Packing Packaging PIPING AND FITTINGS FOR WASHBASIN SANITARY DESCRIPTION IN INDIVIDUAL PRINTED BAGS SANITARY Washbasin, bidet and urinal GLUE Piping with integrating seal Co-injection technology 0201011* S1 30 32 0201023* S1 30 32 0201248 S1 L266, metallized plastic wall outlet with rosette, 32 Ø 32 mm pipe, supplied with solvent-weld adaptor 0201279 S1 0501144 B1 RAINGUTTERS 32 L266 L268M, space-saving, back outlet BUILDING L268M FASCIA AND ROOFING SOFFIT BOARDS Chromed plastic piping 3268 3268, chrome washbasin piping, special space32 saving, back outlet VENTILATION Brass chrome piping 3250, 190 mm length 32 0501013 S1 3250S, 300 mm length 32 0501019 S1 3250S, 400 mm length 32 0501127 S1 32 0201186 S1 HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS Chrome wall outlet with rosette, Ø 32 mm pipe 3250 3250S CA32 CA32, Non-siphonnage valve 59 ENVIRONMENT Plastic accessories SAUL L265 L265, white PP wall outlet, with rosette, pipe, outlet supplied with solvent-weld adaptor ROOFING ACCESSORIES Plastic piping ACCES TRAP DOOR New ! BMT01, co-injected pipe trap. Special spacesaving back outlet with built-in seal HYDRAULIC DRAINAGE CHANNELS BMT01 SANITARY WASTES AND TRAPS SANITARY Washbasin, bidet and urinal IN INDIVIDUAL PRINTED BAGS DESCRIPTION REF. Packing Packaging WASHBASIN WASTES Plastic waste with or without plug L262 L263 L269 L260, washbasin waste with plug chain 0201019 S1 100 L262, washbasin bidet waste with Ø 55 mm grid 0201031 S1 100 L263, washbasin bidet waste with Ø 63 mm grid 0201085 S1 120 L269, washbasin bidet waste with Ø 60 mm domed grid 0201100 S1 150 L2260, washbasin waste plug and chain, brass body 0501020 S1 50 L2262, washbasin waste, brass body with Ø 55 mm grid 0501026 S1 L2263, washbasin waste, brass body with Ø 63 mm grid 0501018 S1 L212, pop-up washbasin waste, stainless steel plug cover, without plunger 0201005 * S1 30 L214, pop-up washbasin waste, stainless steel plug cover, with plunger 0201006 * S1 20 L212S, pop-up washbasin waste, stainless steel 0201072 * plug cover, control by lever S1 L273, pop-up washbasin waste, stainless steel plug cover, for Porcher type washbasin 0201190 S1 L3212, pop-up washbasin waste in brass, shiny 0501030 chrome, without plunger B1 35 L3214, pop-up washbasin waste, shiny chrome, with plunger 0501032 S1 15 L3222, pop-up washbasin waste, stainless steel plug, mat chrome-plated brass body, without plunger 0501036 B1 15 L3213, pop-up washbasin waste in brass, shiny 0501044 chrome, control by lever B1 15 L213, chrome washbasin bidet plunger, to connect to pop-up washbasin wastes S1 L260 L2262 L2263 Brass wastes with plug L2260 L212 L214 Pop-up wastes with plastic body L273 L212S L3212 Pop-up wastes with brass body L3222 L3214 L213 Catalog 4 L3213 0201004 60 References marked with * are DRAINAGE FITTINGS Valve finish Basin tightening thickness mm REF. yes round cover 30-45 0501161 B1 yes square 30-50 0501090 B1 yes round cover 0-45 0501137 B1 L3218, shiny chrome waste, hand pop-up controlled, round plug, overlapping plug yes round cover 30-50 0501084 B1 20 L3215, shiny chrome waste, hand pop-up controlled, round plug yes round 30-50 0501074 B1 20 round cover 0-70 0501172 S1 20 Plugging Pac- Packaking ging DESIGNER WASHBASIN WASTES L3221, shiny chrome waste, hand pop-up controlled, square plug L3230, shiny chome waste, with spacer for the worktop, specifically designed for basins installed on boards (>25 mm, < or = 55 mm), hand pop-up controlled L3218 RAINGUTTERS Designer range of brass wastes with plug for basin with overflow ROOFING ACCESSORIES L3221 L2267 no round cover 0-45 0501085 B1 20 L2267, shiny chrome waste, with grating, height 100 mm no grating 0-70 0501091 B1 20 L2264, shiny chrome waste, fixed round plug, height 100 mm no round cover 5-70 0501078 B1 20 round cover 20-70 0501095 B1 25 no round cover 0-65 0501171 S1 20 yes round pivot 32-45 0501176 L2268, shiny chrome waste, height 100 mm, hand pop-up controlled. User vigilance is required for plugging the L2268. L2264 yes VENTILATION L3219, shiny chrome waste, fixed round plug, delivered with spacer HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS L3219 Designer range of brass wastes with fix plug for basin without overflow DID YOU KNOW ? L32UF, universal shinny chrome waste, fixed round plug, central screw for mounting thin or thick basins L2268 THE NICOLL EXTRA 3233P, waste with pivot plug, Brass chrome. L32UF DID YOU KNOW ? According to the washbasin NF EN 14688 standard, washbasins must offer protection against overflow; basins/ washbasins without a built-in overflow must be fitted either with a free-flow drain or a manually controlled plug, provided PRO SELECTION that the bathroom is fitted with a floor trap. 61 THE NICOLL EXTRA ENVIRONMENT L3215 L32UM yes BUILDING L32UM, universal shiny chrome waste, round plug; hand pop-up controlled, central screw for mounting thin or thick basins FASCIA AND ROOFING SOFFIT BOARDS L3230 SAUL L227 20 ACCES TRAP DOOR L227, chrome waste with plastic body, hand pop-up controlled, plug cover in stainless steel GLUE Designer range of chrome wastes with plastic body for basin with overflow HYDRAULIC DRAINAGE CHANNELS DESCRIPTION SANITARY IN INDIVIDUAL PRINTED BAGS SANITARY Washbasin, bidet and urinal SANITARY WASTES AND TRAPS SANITARY Washbasin, bidet and urinal IN INDIVIDUAL PRINTED BAGS Chrome grid DESCRIPTION Bowl Overflow thickness hole drain REF. Pac- Packaking ging DESIGNER RANGE ACCESSORIES Plastic overflows Ø 24 mm for Ø 25 to 30 mm washbasin/bowl hole 910S, for 0 to 10 mm bowl thickness Ø 24 mm, L 18 mm up to 10 mm 25 to 30 mm 0201151 S1 80 917S, for 10 to 20 mm bowl thickness Ø 24 mm, L 27 mm 10 to 20 mm 25 to 30 mm 0201152 S1 80 910FE, for 0 to 10 mm bowl thickness Ø 30 mm, L 15 mm up to 10 mm Ø 30 to 33 mm 0204160 S1 80 917FE, for 10 to 20 mm bowl thickness Ø 30 mm, L 27 mm 10 to 20 mm Ø 30 to 33 mm 0201127 S1 100 917FT, for 12 to 18 mm bowl thickness with a rosette Ø 30 mm (screw) and central screw 12 to 18 mm Ø 30 to 35 mm 0201274 S1 100 0201099 S1 30 30 Plastic overflows Ø 30 mm for Ø 30 to 33 mm washbasin/bowl hole 910S 917S 910FE 917FE 900RE, plastic overflow for washbasin, with closing nut, without overflow pipe 917UC, metallized plastic overflow for Ø 25 to 30 mm washbasin/bowl hole for 0 to 20 mm bowl thickness 900RE Ø 24 mm, L 18 & 27 mm up to 20 mm 25 to 30 mm 0201265 S1 915CR, ABS chrome hiding ring for designer washbasin waste - - - 0403068 S1 916CR, spacer ring between basins and board, chrome-plated brass, for perfect sealing - - - 0403069 B1 Ring for washbasin waste 917UC 915CR 916CR DESCRIPTION Ø LENGTH REF. Pac- Packaking ging FLEXIBLE HOSES D32 AND D40 Flexible fittings - Vidhooflex Ø 32 mm with solvent weld connector and 2 lip seals 6008 6005 6001 6002 6001, vidhooflex, 650 mm with Ø 32 connector 32 650 mm 0206001 6001K, vidhooflex L = 900 mm with Ø 32 mm and Ø 50 mm connector 32 1,50 m 0206064 50 6003K, vidhooflex L = 900 mm with a Ø 32/50 mm connector, 50 mm socket 32 900 mm 0206072 55 6032K, vidhooflex L = 1,50 m with Ø 32 mm and Ø 50 mm connectors 32 1,50 m 0206035 S1 25 6008, vidhooflex without connector 25 meters 32 2,50 m 0206008 C1 1 6012, solvent weld connector with 2 lip seals 32 - 0206012 S1 6002, vidhooflex 650 mm, with Ø 40 connector 40 650 mm 0206002 S1 70 6002K, vidhooflex 900 mm with a Ø 40/50 connector 40 900 mm 0206065 S1 30 6039K, vidhooflex 1500 mm with Ø 40/50 connector 40 1,50 m 0206067 S1 17 6005, vidhooflex Ø 40 mm, 25 meters without connector 40 2,50 m 0206005 C1 1 6009, Ø 40 mm solvent weld connector with 2 lip seals 40 - 0206009 S1 S1 100 Flexible fittings - Vidhooflex Ø 40 mm Catalog 4 6009 6012 62 DRAINAGE FITTINGS DESCRIPTION Water Cable length seal & overflow REF. Pac- Packaking ging BATHTUB DRAINS WITH CABLE 650 mm 0203613* B1 14 EB08S, 650 mm with Ø 40/50 elbow connector 50 650 mm 0203619* B1 13 EB18, 1m 50 1m 0203614* B1 14 EB18S, 1m with Ø 40/50 elbow connector 50 1m 0203620* B1 13 EB07, 650 mm 50 650 mm 0203611* S1 25 EB07S, 650 mm with Ø 40/50 elbow connector 50 650 mm 0203617* S1 20 EB07UK, 650 mm with Ø 40/43 elbow connector 50 650 mm 0203640* S1 20 EB17, 1 m 50 1m 0203612* S1 20 EB17S, 1 m with Ø 40/50 elbow connector 50 1m 0203618* S1 20 TBR07, 650 mm 50 650 mm 0203577* S1 25 TBR7S, 650 mm in cardboard box 50 650 mm 0203588 B1 20 TBR7S, 650 mm with Ø 40/43 mm connector 50 650 mm 0203586 S1 25 VO27P, 650 mm with Ø 40/50 mm connector 50 650 mm 0203563 S1 25 VO37P, 650 mm with Ø 40/50 mm connector, with stainless steel plate 50 650 mm 0203548 S1 25 TBR17, 1 m 50 1m 0203584* S1 20 TBR08, 650 mm 50 650 mm 0203583* S1 20 TBR18, 1 m 50 1m 0203585* S1 20 650 mm 0505001 B1 GLUE ROOFING ACCESSORIES 50 TBR07 VENTILATION Drain with orientable trap, stainless steel Ø 70 mm plug, chrome-plated ABS handwheel HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS Cable drains BUILDING EB07 FASCIA AND ROOFING SOFFIT BOARDS EASYBAIN Wave , hand wheel and plug in chrome-plated ABS Drain with orientable trap, chrome-plated brass Ø 45 mm plug, chrome-plated ABS handwheel Brass cable drains 6100 6100, brass drain Ø 45 mm, chrome-plated brass handwheel, to be used with brass u trap ref: 1056 0505013 63 References marked with * are ENVIRONMENT TBR08 SAUL EB08, 650 mm RAINGUTTERS EASYBAIN Stick, hand wheel and plug in chrome-plated brass ACCES TRAP DOOR EB08 HYDRAULIC DRAINAGE CHANNELS Co-injection technology EASYBAIN, co-injection technology cable bathtub drainage Trap with built-in seals, very compact, high flow rate (70 l/min which is 30 % above the EN requirements), self-cleaning, with a 5° directional outlet, factory pre-assembled and extendable 650 mm overflow, without cutting. Attractively-designed hand wheels with excellent grip. SANITARY IN INDIVIDUAL PRINTED BAGS SANITARY Bathtub SANITARY WASTES AND TRAPS SANITARY Bathtub IN INDIVIDUAL PRINTED BAGS DESCRIPTION Water seal Cable length & overflow pipe REF. Packing Packaging BATHTUB DRAINS WITH FOOT POP-UP PLUG AND CHAIN EASYCLIC foot pop-up plug, chrome-plated brass waste cover Ø 70 mm, EB602, 650 mm with chrome brass overflow head 50 650 mm 0203543 S1 20 B620P, EB602 with Ø 40/50 elbow connector and ABS chrome overflow head 50 650 mm 0203566 S1 20 EB652, 1 m with chrome brass overflow head 50 1m 0203560 S1 20 15 590 mm 0505040 B1 B202, bathtub drain with plug and chain, overflow with positioner, double lip seal 50 650 mm 0203002 S1 20 B202P, B202 with D 40/50mm connector 50 650 mm 0203562 S1 35 EB602 B502 Brass drain with plug and chain B502, retro style bathtub drain with plug and chain, chrome-plated solid brass, specially designed for bathtubs with visible overflow Drains with plug and chain B202 DESCRIPTION Ø REF. White Packing 40 1YH5CB S1 C-PVC BATHTUB TRAP - M1 Class Catalog 4 Trap with adjustable outlet 64 References marked with * are Packaging DRAINAGE FITTINGS DESCRIPTION Ø Water seal REF. Packing Packaging BATHTUB TRAPS SANITARY IN INDIVIDUAL PRINTED BAGS SANITARY Bathtub 207 207, bathtub trap 360° orientable, self cleaning 40 50 0203250 * S1 20 204, bathtub trap, with access cop 40 50 0203008 * S1 40 205, bathtub trap, P shape, reduced height 40 12 0203011 S1 75 1055, S trap, with high flow rate 40 50 0501001 B1 1056, P trap in cast brass 40 15 0505013 B1 GLUE Plastic traps RAINGUTTERS 204 Connec- Connector tor inlet Ø outlet Ø REF. Packing Packaging D135 43 0201025 C100 100 D4050, Ø 40/50 ABS connector, straight 40 50 9833462 C60 60 D3250, Ø 32/50 ABS connector with a 1.1/4" thread 32 50 9833489 C140 140 D4050, Ø 40/50 ABS connector with a 1.1/2" thread 40 50 9833461 C102 102 D135, Ø 40/50 ABS connector, 135° 40 50 0411384 C100 100 DESCRIPTION REF. VENTILATION D3250 40 BUILDING D4043 D4043, Ø 40/43 ABS connector, straight (BSP) FASCIA AND ROOFING SOFFIT BOARDS ADAPTATOR ACCESSORIES Packing Packaging ISO, plate for steel bath, self-adhesive, fire-prevention treatment, available in pallets with 1200 or 2400 plates DID YOU KNOW ? 0412024 V1 pallet ISO-4, plate for steel bath, self-adhesive, fire-prevention 0412021 treatment, 4 plate kits in plastic bag S1 4 HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS ACOUSTIC INSULATION ACCESSORIES ISO THE NICOLL EXTRA DID YOU KNOW ? • The sound insulation set reduces the level of sound produced by steel baths by more than 25 % THE NICOLL EXTRA PRO SELECTION 65 References marked with * are ENVIRONMENT • The plates are positioned as shown here SAUL DESCRIPTION ACCES TRAP DOOR 1056 HYDRAULIC DRAINAGE CHANNELS 1055 ROOFING ACCESSORIES Brass traps 205 SANITARY NEW GENERATION TRAP FOR Ø 90 MM SHOWER TRAYS Co-injection technology Ø 90 (Nearly twice the NF EN 274 standard requirement), Water instantly drained from the shower-tray. Particularly adapted to ultra-flat trays and to multi-jet or rainfall hydrotherapy equipments. No risk of overflow from the tray. CERTIFIED dard tan Fs 43 L/MIN < 40 mm RECORD FLOW RATE OF 43L/MIN twic eN VERY HIGH FLOW RATE, CO-INJECTION TECHNOLOGY, GOOD CLEANING ABILITY The trap and the soil pipe can be inspected by plumber's snake. Removable hair catchers. Interior self-cleaning effect due to the power of the flow which creates a flush effect carrying deposits out of the trap. This NF EN 274 certified trap has guaranteed chemical and mechanical resistance and prevents odours rebounding with its regulatory 50 mm water seal. Water seal 50 mm 80 mm PROFESSIONAL QUALITY GUARANTEE Enables a shower installation to comply with the DHUP* accessibility guide provisions produced by the CSTB** (in the case of a shower tray, known to be accessible, 2 conditions are required: the shower tray must be NF certified, with a floor profile ≤ 2 cm and it must be equipped with a trap which is also NF EN 274 certified). Catalog 4 *DHUP (Direction de l'Habitat, de l'Urbanisme et des Paysages) is the French gouvernemental Directorate of Housing, Urbanism and Landscape **CSTB (Centre Scientifique et Technique du Bâtiment) is the French Scientific and Technical Building Center 66 DRAINAGE FITTINGS GLUE INCORPORATION OF NEW TECHNOLOGIES FOR INCREASED PERFORMANCE ROOFING ACCESSORIES FASCIA AND ROOFING SOFFIT BOARDS • Full swivel outlet ball joint • Universal: to be screwed or glued due to its special grey interior for gluing 10° BUILDING 2- Ease of connection to the drainage using a new outlet ball joint VENTILATION 3- Ease of mounting on the tray due to a simplified system of tightening the trap HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS Designed with a single central screw and a positioner, the plate positions itself in the right place automatically and tightens in a flash with the special key provided. Minimalist design cover following the latest easthetic trends in bathroom. 67 ENVIRONMENT DESIGNER FINISH SAUL TPE material, high resistance Striated design to cover the imperfections of certain shower trays. ACCES TRAP DOOR • • HYDRAULIC DRAINAGE CHANNELS Seal co-injected to the trap body, always correctly positioned RAINGUTTERS 1- Instantaneous watertightness guarantee of co-injection technology • SANITARY SANITARY NEW SANITARY WASTES AND TRAPS SANITARY Shower tray DESCRIPTION Ø Water seal Outlet REF. Packing Packaging WASTE FOR SHOWER TRAY TURBOFLOW® 2, new of generation trap with very high flow rate, co-injection technology, universal Ø 90 mm, NF EN 274 certified New ! TB22, Turboflow® 2, Ø 90, second generation, metal chrome plate 40 50 horizontal 0205701* B1 12 TB21, Turboflow® 2, Ø 90, second generation, chrome plate ABS 40 50 horizontal 0205700* B1 12 TB22EX, Turboflow® 2, Ø 90, second generation, metal chrome plate with Ø 40/50 outlet 40/50 50 horizontal 0205703* B1 12 TB21EX, Turboflow® 2, Ø 90, second generation, chrome plate ABS with Ø 40/50 outlet 40/50 50 horizontal 0205702* B1 12 DESCRIPTION outlet WATER SEAL Ø OUTLET REF. Packing Packaging WASTE FOR SHOWER TRAY TURBOFLOW, plastic waste with high flow rate, Ø 90 mm TB90 TB90, Turboflow, chrome-plated ABS cover Smile design 40/50 50 horizontal 0205240* B1 10 TB90P, TB90 in plastic bag 40/50 50 horizontal 0205377 S1 35 TURBOFLOW, plastic waste with high flow rate, Ø 60 mm TB60 TB60, Turboflow, chrome-plated ABS cover Smile design 40/50 50 horizontal 0205243* B1 10 TB60P, TB60 in plastic bag 40/50 50 horizontal 0205471 B1 10 TURBOFLOW, plastic waste with high flow rate, Ø 50 mm TB50 TB50, Turboflow, chrome-plated ABS cover Smile design 40/50 50 horizontal 0205246* B1 10 TB50P, TB50 in plastic bag 40/50 50 horizontal 0205375 S1 40 40 50 horizontal 0205070* S1 25 40/50 50 horizontal 0205378 S1 20 695, waste for shower tray, with stainless steel grid, universal for all types of shower tray, easy 40 to clean 50 horizontal 0205075* S1 10 790, waste for shower tray, chrome-plated ABS cover, universal for all types of shower tray types 50 vertical 0205110* S1 25 790S, 790 with vertical outlet (with a Ø 40/50 40/50 connector) 50 vertical 0205373 S1 25 795, waste for shower tray, with stainless-steel 40 grid, universal for all types of shower tray 50 vertical 0205115* S1 10 Standard plastic waste, Ø 90 mm 690, waste for shower tray, chrome-plated ABS cover, universal for all types of shower tray, easy to clean 690P, 690 with D 40/50mm connector 690 695 790 Catalog 4 795 68 40 DRAINAGE FITTINGS DESCRIPTION Ø REF. Packing Packaging C -PVC WASTES FOR SHOWER TRAY - M1 class SANITARY IN INDIVIDUAL PRINTED BAGS SANITARY Shower tray S1 B-100 Horizontal outlet 32/40 SCDFH S1 B-80 Ø 60 drain seal 32/40 JSDFH Outlet REF. Packing Packaging ROOFING ACCESSORIES outlet Water Ø seal WASTES FOR SHOWER TRAY 600 580 40 50 horizontal 0205301 * S1 30 580, waste for ceramic and ceramic shower tray with stainless steel grid, easy to clean 40 50 horizontal 0205001* S1 40 600, waste for acrylic shower tray with stainless steel grid, easy to clean 40 50 horizontal 0205002 * S1 30 590, waste for shower tray, with stainless 40 steel grid, easy to clean with vertical outlet 20 vertical 0205049 S1 30 BUILDING 584 584, waste for shower tray, chrome-plated ABS cover, universal for all types of shower tray, easy to clean FASCIA AND ROOFING SOFFIT BOARDS Ø 60 mm wastes VENTILATION 590 3580 3660 3580, waste for shower tray, with stainless steel grid 40 50 horizontal 0504001 * B1 15 3660, waste for shower tray, with vertical outlet, outlet by straight semi-fitting 38 10 vertical 0504003 B1 30 570, waste for shower tray, with stainless steel grid, with orientable trap 40 50 horizontal 0205003 * S1 50 571, waste for shower tray with stainless stell grid (outlet 40) 40 50 horizontal 0205026 S1 40 40/50 50 horizontal 0205374 S1 30 40 50 horizontal 0205458 S1 25 577P, 571 with a Ø 40/50 connector 578 578, co-injected trap with very high flow rate, with brass chrome foot pop-up plug (with a Ø 40/50 connector) 69 ENVIRONMENT Ø 50 mm waste 570 References marked with * are HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS Ø 60 mm brass wastes SAUL DESCRIPTION RAINGUTTERS SDFH ACCES TRAP DOOR SCDFH 32/40 HYDRAULIC DRAINAGE CHANNELS SDFH Vertical outlet GLUE Waste trap for shower tray to be glued Ø 60 (with grid) SANITARY WASTES AND TRAPS SANITARY Sink IN INDIVIDUAL PRINTED BAGS Ø REF. Grey Trap with swivel outlet (with seal) 40 YH21C S1 Trap with swivel outlet (with seal) with washing machine connection 40 YH28C S1 Double trap with swivel outlet (with seal) 40 YH24C S1 Double trap with swivel outlet (with seal) with washing machine connection 40 YH25C S1 DESCRIPTION Packing Packaging C-PVC SINK TRAPS - M1 Class YH21C YH25C DESCRIPTION Ø Water Adjustable seal height REF. D-20 Packing Packaging SINK TRAPS 1" 1/2 EASYPHON, traps with built-in seals Co-injection technology BM55S BM53 552 BM552, Easyphon for sink (in shrunk packaging) 40 50 133-192 0224286* S1 40 BM55S, BM552 in plastic bag 40 50 133-192 0224287* S1 25 CE52S, Easyphon bottle trap with wall outlet 40 50 133-192 0202075* S1 60 BM53, Easyphon trap with connection for washing machine 40 50 177-222 0224360* S1 40 CE53, BM53 with Ø 40 wall outlet pipe 40 50 177-222 0224408* S1 40 552, outlet Ø 40 mm 40 50 137-177 0204002* S1 30 542, P design, horizontal outlet 40 50 140-185 0204460* S1 30 1053, sink trap, matt chrome 40 50 149-222 0501008* B1 50 1054, sink trap, shiny chrome 40 50 149-222 0501010* B1 30 1055, S design sink trap, high flow rate 40 50 non 0501001* B1 542 Plastic traps 1053 Brass trap 1054 Catalog 4 1055 70 References marked with * are DRAINAGE FITTINGS Number washing Space With of machine saving connection boards REF. Packing Packaging SINK PIPING GLUE Plastic connection pipings 561 2 no yes 0204016* S1 30 5258, back outlet piping, with washing machine connection 1 yes yes 0204183* S1 30 569, universal connection piping, with washing machine connection 2 yes yes 0204981* S1 35 567, extension part for sink piping 2 - no 0224063 S1 RAINGUTTERS 561, sink "tube" trap, high flow rate, with washing machine connection FASCIA AND ROOFING SOFFIT BOARDS Ø REF. VENTILATION DESCRIPTION Packing Packaging HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS SINK ACCESSORIES Plastic accessories CA40 500, separator fitting for washing machine connection 40 0204041 S1 70 CA40, Ø 40 mm non-siphonnage valve to be screwed, prevents siphonnage 40 0224062 S1 20 71 References marked with * are ENVIRONMENT 500 SAUL 567 ACCES TRAP DOOR BUILDING 569 ROOFING ACCESSORIES 5258 HYDRAULIC DRAINAGE CHANNELS DESCRIPTION SANITARY IN INDIVIDUAL PRINTED BAGS SANITARY Sink SANITARY WASTES AND TRAPS SANITARY Sink IN INDIVIDUAL PRINTED BAGS DESCRIPTION Hole diameter Kind of plug Special waste Overflow With washing machine connection REF. Pac- Packaking ging WASTES AND DRAINS - FOR STAINLESS STEEL SINKS WITH A 50 MM DIAMETER HOLE Ø 70 mm waste and drain, 1-bowl sink 556 C5915 556, waste for stainless steel sinks with chain-stopper and overflow 50 (stainless steel) chainstopper no yes no 0204015 S1 20 558, waste for stainless steel sinks with chain-stopper and without overflow 50 (stainless steel) chainstopper no no no 0204014 S1 100 C5915, full drain system for stainless steel 1-bowl sinks, with chain-stopper and with trap adjustable in height 50 (stainless steel) chainstopper no yes no 0204315 S1 35 509, waste with basket, manually operated, without overflow 50 (stainless steel) basket manually no no no 0224414 S1 510, waste with basket, manually operated, with overflow 50 (stainless steel) basket manually no yes no 0224415 S1 50 (stainless steel) chainstopper no yes yes 0204310 S1 30 C5911, complete drain system for 2-bowl 50 stainless steel sinks with chain-stopper, (stainless washing machine connection, trap adjustable steel) in height chainstopper no yes yes 0204311 S1 25 C592P, full drain system for 2-bowl sinks, with Ø 40 wall outlet, without overflow 50 (stainless steel) ring stopper no no yes 0224255 S1 30 C596P, full drain system for 1-bowl sinks, with Ø 40 wall outlet, without overflow 50 (stainless steel) ring stopper no no yes 0224251 S1 25 5582, Ø 70 waste for stainless steel sinks with ABS telescopic overflow 50 (stainless steel) overflow yes no no 0204175 S1 559, Ø 70 waste for telescopic overflow 50 (stainless steel) overflow yes no no 0224301 S1 overflow yes no no 0224345 S1 overflow yes no no 0224303 S1 overflow yes no no 0224302 S1 558 509 Ø 70 mm wastes and drains for two-bowl sinks C5910, drain system for 2-bowl sinks, with chain-stopper, with washing machine connection, without trap 510 C5910 Drain with telescopic overflow Ø 70 mm 559 50 5593, stainless steel overflow for waste 559, (stainless length 350 mm steel) 50 5592, stainless steel overflow for waste 559, (stainless length 275 mm steel) 5593 50 Catalog 4 5582 72 5591, stainless steel overflow for waste 559, (stainless length 175 mm steel) DRAINAGE FITTINGS DESCRIPTION With Hole Kind of Special washing Overflow machine diameter plug waste connection REF. Pac- Packaking ging SANITARY IN INDIVIDUAL PRINTED BAGS SANITARY Sink WASTES AND DRAINS - FOR CERAMIC SINK WITH A 60 MM DIAMETER HOLE 512 no no no 0204004 * S1 5651, with stainless steel grid, without overflow 60 no no no no 0204005 * S1 40 20404, with chain-stopper, with overflow 60 chainstopper no yes no 0204601 * S1 30 511, manual opening, without overflow 60 manual basket strainer no no no 0204120 * S1 512, manual opening, with overflow 60 manual basket strainer no yes no 0204121 * S1 RAINGUTTERS chainstopper ROOFING ACCESSORIES 511 60 20405, with chain-stopper, for 2-bowl sinks 60 chainstopper no yes no 0204602 * S1 30 C5907, complete monobloc waste system for 2-bowl sinks, with chain-stopper, with overflow, high flow rate piping with anti-backflow system, washing machine connection, compact 60 chainstopper no yes yes 0204307 * S1 25 FASCIA AND ROOFING SOFFIT BOARDS Ø 84 mm waste and drain for 2-bowl ceramic sinks basins with Ø 60 mm hole Ø 84 mm waste and drain for ceramic sinks with Ø 60 mm hole without overflow no yes 0204006 * S1 yes double wall sink no yes 0204007 * S1 yes chain- double stopper wall sink no no 0204011 S1 15 60 yes chain- double stopper wall sink no yes 0204008 * S1 15 60 chainstopper no yes 0204022 * S1 9 60 DID YOU KNOW ? 554G, Ø 84 drain for sinks with built-in overflow, with grating, with washing machine connection 60 no 554G 554P 050 THE NICOLL EXTRA THE NICOLL EXTRA 050, drain plate Ø 84 ceramic sink with built-in 60) overflow, with chain-stopper 555P, full Ø 84 drain system for 2-bowl sinks with built-in overflow, with chain-stopper, with washing machine connection 555P VENTILATION yes chain- double stopper wall sink 554P, Ø 84 drain for sinks with built-in overflow, with chain-stopper, with washing-machine connection DID YOU KNOW ? HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS C5907 BUILDING 20405 rate piping with anti-backflow system, with trap adjustable in height, washing machine connection no PRO SELECTION Double-wall sinks have an overflow system built-in into the bowl to protect against overflow, as such, they do not need to be fitted with an overflow drain like most other sinks. 56352 73 References marked with * are ENVIRONMENT 56352, full Ø 84 drain system for 2-bowl sinks, PROwith SELECTION chain-stopper, without overflow, high flow- SAUL 20404 560, with chain-stopper, and without overflow ACCES TRAP DOOR 5651 GLUE Ø 84 mm waste and drain for 1 bowl ceramic sink HYDRAULIC DRAINAGE CHANNELS 560 SANITARY WASTES AND TRAPS SANITARY Sink IN INDIVIDUAL PRINTED BAGS DESCRIPTION With Hole Kind of Special Over- washing diameter plug waste flow machine connection REF. Pac- Packaking ging WASTES AND DRAINS - FOR CERAMIC SINK WITH A 60 MM DIAMETER HOLE Ø 84 mm brass waste for 1 bowl ceramic sink 1060, with chain-stopper, brass body 60 chainstopper no no no 0501003* S1 1151, with grid, brass body 60 no no no no 0501004* S1 1151 1060 DESCRIPTION HOLE DIAMETER KIND OF PLUG SPECIAL WASTE OVERFLOW WITH WASHING MACHINE CONNECTION REF. 50 Pac- Packaking ging WASTES AND DRAINS - FOR SINK (ALL TYPES) WITH A 90 MM DIAMETER HOLE Ø 114 mm wastes with basket for sinks with Ø 90 mm hole 513 513, Ø 114 waste with baskets for all types of sinks, manual opening, without overflow 90 basket manually no no no 0204122* S1 50 514, Ø 114 waste with baskets for all types of sinks, manual opening, with overflow 90 basket manually no yes no 0204123* S1 30 532, Ø 114 waste with baskets for all types of sinks, with rotative pop-up control, with overflow, piping space saving with washing machine connection 90 «automatic, rotative control» no yes yes 0204118 * S1 532T, Ø 114 waste with baskets for all types of sinks, with pop-up control lever, with overflow, space saving piping with washing machine connection 90 «automatic control, pull handle» no yes yes 0224138 * S1 515, Ø 114 waste with baskets for all types of sinks 2 bowl, manually controlled, with overflow 90 basket manually no yes no 0204168 * S1 20 519, Ø 114 , drain with baskets for all types of sinks, manually operated, with universal overflow, space saving piping with washing machine connection, with adjustable height trap 90 basket manually no yes yes 0224316 S1 15 535, Ø 114 drain with baskets for all types of 2-bowl sinks, with rotative pop-up controlled, overflow, space saving piping with washing machine connection 90 automatic, rotative control and manual basket strainer no yes yes 0224045 * S1 534, Ø 114 drain with baskets for all types of 2-bowls sinks, with rotative pop-up control, with overflow, space saving piping with washing machine connection 90 2 automatic, rotative control no yes yes 0204115 * S1 90 automatic, rotative control and manual basket strainer no yes yes 0224139 * S1 514 532 532T Ø 114 mm wastes with basket for 2-bowl sinks with Ø 90 mm hole 515 519 535 534 Catalog 4 535T, Ø114 drain with baskets for all types of 2-bowls sinks, with pop-up control, plugger with overflow, space saving piping, with washing machine connection 535T 74 References marked with * are DRAINAGE FITTINGS DESCRIPTION Overflow pipe Overflow head position REF. Packing Packaging OVERFLOW KITS FOR SAUCE BASIN STRAINER SANITARY IN INDIVIDUAL PRINTED BAGS SANITARY Sink 0411273 S1 VS70, round Ø 70 yes horizontal 0411514 S1 VSREC, rectangular yes horizontal 0411523 S1 TPFR, overflow head 5 x 37 round grid and screw no vertical 0411598 S1 TPFR2, overflow kit with 5 x 37 without grid yes vertical 0411378 S1 DVS, overflow kit for horizontal sauce basin strainer yes horizontal 9887256 S1 DECOS, overflow kit for horizontal sauce basin strainer yes horizontal 0411513 S1 RAINGUTTERS horizontal ROOFING ACCESSORIES yes Other traps Ø Length REF. Packing GS008, safety group trap adjustable in height, inlet G 1", outlet 1"1/4 - Ø 32 mm 32 50 0201169* S1 GS009, safety group trap not adjustable in height, inlet G 1", outlet G 1" - Ø 25 mm + socket Ø 32 mm 32 50 0201176* S1 DESCRIPTION Packaging FASCIA AND ROOFING SOFFIT BOARDS OTHER TRAPS GS009 HYDRAULIC DRAINAGE CHANNELS SAUL 75 References marked with * are ENVIRONMENT HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS VENTILATION GS008 BUILDING Plastic traps for water heater safety groups ACCES TRAP DOOR VS34 VS34, round Ø 34 GLUE Overflow kits SANITARY WASTES AND TRAPS SANITARY Miscellaneaous and fittings DESCRIPTION Pac- Packaking ging Ø REF. 426, Ø 18 - Swan neck single spout centre distance 150 20x27 with aerator 18 0150012 S1 50 427, Ø 18 - Swan neck single spout centre distance 200 20x27 with aerator 18 0150014 S1 100 428, Ø 18 - Swan neck single spout centre distance 250 20x27 with aerator 18 0150025 S1 40 416, Ø 14 - Swan neck single spout centre distance 150 15x21 with aerator 14 0150015 S1 100 417, Ø 14 - Swan neck single spout centre distance 200 15x21 with aerator 14 0150016 S1 100 418, Ø 14 - Swan neck single spout centre distance 250 15x21 with aerator 14 0150024 S1 50 436, Ø 14 - S-shaped single spout centre distance 150 15x21 with aerator 14 0150009 S1 100 437, Ø 14 - S-shaped single spout centre distance 200 15x21 with aerator 14 0150010 S1 100 438, Ø 14 - S-shaped single spout centre distance 250 15x21 with aerator 14 0150031 S1 100 439, Ø 14 - S-shaped single spout centre distance 300 15x21 with aerator 14 0150032 S1 100 442, Ø 14 - S-shaped single spout centre distance 350 15x21 with aerator 14 0150033 S1 50 446, Ø 18 - S-shaped single spout centre distance 150 20x27 with aerator 18 0150002 S1 25 447, Ø 18 - S-shaped single spout centre distance 200 20x27 with aerator 18 0150004 S1 20 448, Ø 18 - S-shaped single spout centre distance 250 20x27 with aerator 18 0150006 S1 20 449, Ø 18 - S-shaped single spout centre distance 300 20x27 with aerator 18 0150008 S1 50 440, Ø 18 - S-shaped single spout centre distance 350 20x27 with aerator 18 0150028 S1 30 454, Ø 14 - Low single spout centre distance 150 15x21 with aerator 14 0150030 S1 25 455, Ø 14 - Low single spout centre distance 200 15x21 with aerator 14 0150023 S1 10 453, Ø 14 - Low single spout centre distance 250 15x21 with aerator 14 0150026 S1 15 450, Ø 18 - Low single spout centre distance 150 20x27 with aerator 18 0150048 S1 25 457, Ø 18 - Low single spout centre distance 200 20x27 with aerator 18 0150022 S1 25 SINGLE SPOUT - MAINTENANCE OF FITTINGS Single spout 426 436 457 DESCRIPTION REF. Pac- Packaking ging ACCESSORIES - MAINTENANCE OF FITTINGS Installation accessories P1 11C P1, control plate for verification 13 threads 0105004 S1 11C, smooth chromed hole cover 0603005 S1 Aerator 480 480, socket 22 x 100 (Class B) 0152002 S1 482 482, spigot 28 x 100 (Class D) 0152006 S1 481, spigot 24 x 101 (Class B) 0152003 S1 Catalog 4 481 76 50 DRAINAGE FITTINGS GLUE SANITARY SANITARY WASHING MACHINE TRAP RAINGUTTERS New monobloc trap ROOFING ACCESSORIES All Nicoll washing machine traps are mare in C-PVC and are installed by gluing onto the existing pipes. Their attachment to the wall requires the use of 2 clamps Ø 40 (ref.CM40). The large range of Nicoll washing machine traps complies with regulatory obligations such as the 50 mm water seal. • The hook facilitates the attachment of the washing machine drain hose. • Watertight screw plug giving direct access for cleaning. VENTILATION • Resistant to 90°C. BUILDING • Greater thickness for more reliability and resistance. ACCES TRAP DOOR FASCIA AND ROOFING SOFFIT BOARDS ADVANTAGES Washing machine trap DESCRIPTION Ø REF. Single trap with horizontal outlet - White 40 1YH42CB S1 D-10 Single trap with horizontal outlet 40 1YH42C S1 D-10 Double trap with horizontal outlet 40 1YH46C S1 D-10 Single trap with swivel horizontal outlet 40 1YH22C S1 D-10 Single trap with swivel vertical outlet 40 1YH23C S1 D-10 Double trap with swivel horizontal outlet 40 1YH26C S1 D-10 Double trap with swivel vertical outlet 40 1YH27C S1 D-10 Ø 40 funnel for double washing machine trap 40 1JAM40C S1 HYDRAULIC SURFACE DRAINAGE DRAINAGE CHANNELS PRODUCTS IN INDIVIDUAL PRINTED BAGS Packing Packaging C-PVC TRAP - M1 Class 77 SAUL 1JAM40C 1YH26C HYDRAULIC DRAINAGE CHANNELS 1YH22C ENVIRONMENT 1YH42C
