1884 SLIDEBOLT PADLOCK LATCH
FOR 161 PREP
PATENT PENDING
INSIDE COVER PLATE
13 GA (.089) STAINLESS STEEL
BACKSET 2-3/4"
#10-32 PAN HD
MACHINE SCREW
WITH FAIL-SAFE NUTS
ACTUATOR
OUTSIDE PLATE
13 GA (.089) STAINLESS STEEL
3/8" DIA. HOLE FOR
PADLOCK SHACKLE
(PADLOCK NOT INCLUDED)
FACE PLATE
13 GA (.089) STAINLESS STEEL
(2) 8-32x3 8" UNDERCUT PHILLIPS
FLAT HEAD M.S.
(2) #8x3 4" PHILLIPS
FLAT HEAD S.M.S.
PADLOCK ASSEMBLY
STAINLESS STEEL
1/2" DIA. BOLT ASSEMBLY
(PULL PLATE)
OPTIONAL
LOCK OUT FEATURE
MODEL No.1888LO
BOLT GUIDE
"T" STRIKE
13 GA (.089) STAINLESS STEEL
(2) 8-32x3 8" UNDERCUT PHILLIPS
FLAT HEAD M.S.
ASA STRIKE
13 GA (.089) STAINLESS STEEL
(2) 12-24x3 8" UNDERCUT PHILLIPS
FLAT HEAD M.S.
INSTALLATION:
1. PREP THE DOOR ACCORDING TO YOUR MODEL ORDERED.
2. INSERT THE BOLT ASSEMBLY INTO THE BOLT GUIDE AND
PLACE THE FACE PLATE ONTO BOLT GUIDE AND SCREW
THE ASSEMBLY TO THE DOOR USING THE PROPER
SCREW FOR THE APPLICATION.
3. PLACE THE PADLOCK ASSEMBLY ON THE CORRECT SIDE
OF THE DOOR MAKING SURE THE ACTUATOR GOES THRU
THE SQUARE HOLES THAT ARE ON THE BOLT ASSEMBLY.
PADLOCK ASSEMBLY MUST BE INSTALLED WITH 3/8" HOLE
ON OPPOSITE SIDE OF LATCH (AS SHOWN IN PICTURE)
4. PLACE THE INSIDE COVER PLATE ON THE OPPOSITE SIDE
OF THE DOOR AND SCREW TOGETHER WITH THE 10-32
SCREWS WITH FAIL-SAFE NUT. CHECK FOR PROPER
OPERATION BEFORE TIGHTING THE SCREWS.
SPECIFICATIONS
MODEL 1884 - 2 3/4" BACKSET
161 DOOR PREP
1/2" DIA. STAINLESS STEEL BOLT W/ 5/8" THROW.
PADLOCK ASSEMBLY: STAINLESS STEEL CASTING
WITH NYLON INSTALLATION GUIDE.
INSIDE COVER PLATE: STAINLESS STEEL.
HANDING: REVERSIBLE/NON-HANDED.
STRIKE: 13 GAUGE (.089) STAINLESS STEEL
4-7/8" ASA OR 2-3/4" T STRIKE.
1884 SLIDEBOLT INSTALLATION-1-00.DWG
R www.abhmfg.com
O
E-mail: abhinfo@abhmfg.com
1884
Architectural Builders Hardware Mfg., Inc.
1222 Ardmore Ave., Itasca, IL 60143
630.875.9900; FAX 800.9FAXABH (932.9224)
c 2013 ABH Mfg., Inc.
printed in USA
PAGE 1 OF 2
ISSUED 7/29/13
1884 SLIDEBOLT PADLOCK LATCH
FOR 161 PREP
1
24
15
8
1
8
5
32
PREP FOR 8-32
MACHINE SCREW
(METAL DOOR)
-OR#8 WOOD SCREW
(WOOD DOOR)
2 PLACES
1
18
C
L
13
16
5
16
C
L OF DOOR
FRAME PREP
1. Mark centerline of latch bolt on frame.
2. Center strike and mark screw positions.
3. Mortise to required strike and box depth.
MODEL 1884
BACKSET 2-3/4"
1/2 DOOR
THICKNESS
CL OF LATCH
EDGE OF STOP
(OR SILENCER)
5
8
1
18
3
4
1
12
1
4
DEEP
5
R16
5
116
5 DEEP
8
LATCH BOLT
CLEARANCE
1
14
9
16
11
116
21
8
23
4
5
8
DEEP
1
R4
1
4
5
116
5
8
3
4
1
116
13
8
33
8
5 DEEP
8
LATCH BOLT
CLEARANCE
1
216
COUNTER SUNK
FOR #8 FLAT HEAD
SCREW
7
216
3
4
41
8
47
8
COUNTER SUNK
FOR #12 FLAT HEAD
SCREW
1884 SLIDEBOLT INSTALLATION-2-00.DWG
R www.abhmfg.com
O
E-mail: abhinfo@abhmfg.com
1884
Architectural Builders Hardware Mfg., Inc.
1222 Ardmore Ave., Itasca, IL 60143
630.875.9900; FAX 800.9FAXABH (932.9224)
1
16
c 2013 ABH Mfg., Inc.
printed in USA
PAGE 2 OF 2
ISSUED 7-29-13