Deutsche Akkreditierungsstelle GmbH
Annex to the Accreditation Certificate D-PL-18498-01-00
according to DIN EN ISO/IEC 17025:2005
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
Holder of certificate:
Freudenberg New Technologies SE & Co. KG
Höhnerweg 2-4, 69469 Weinheim
with its departments
Physical Characterization
Material and Failure Analysis
Chemistry and Surface Technology
Tests in the fields:
mechanical, physical and physico-chemical tests on elastomeric materials, thermoplastics and
thermosets, fibre reinforced plastics, foams, films, textile and metallic materials as well as
products
Abbreviations used: see last page
The laboratory is permitted within the specified testing fields marked with *), without being
required to inform and obtain prior approval from DAkkS the free choice of standard or
equivalent test methods. The listed test methods are exemplary. The laboratory maintains
a current list of all test methods in a flexible scope of accreditation.
This document is a translation. The definitive version is the original German annex to the accreditation certificate.
1/16
Annex to the accreditation certificate D-PL-18498-01-00
Mechanical, physical and physico-chemical tests on polymeric, metallic and textile materials *)
Type of tests
Deformation and
strength properties
 Tensile load
 Compression load
 Flexural strength
 Tear propagation
strength
 Compression set /
relaxation behavior
 Tensile and
compression stress
relaxation
 Peel and cohesive
resistance
Environmental exposure and resistance
 Chemical resistance
 Thermally resistance
 Corrosion resistance
 Weathering /
Resistance to fading
 Humidity
 Ozone
Voltage and resistance
change
 Resistance
Physical testing
 Hardness
 Depth of impression
 Density
 Layer thickness
 Abrasion
 Permeation
 Fogging
characteristic
 Rebound resilience
 Porosity
1)
Test statistic
Range of measurement
Uncertainty of
1)
measuments
Exemplary standard
Force
Distance
Time
Temperature
0,2 N - 200 kN
0,1 µm - 1.000 mm
>1s
-70 °C - 250 °C
Class 0,5
Class 0,5
0,5% of value
1K
DIN 53504
ISO 37
DIN EN ISO 527
ISO 9073
DIN EN ISO 6892-1
DIN EN ISO 604
DIN EN ISO 178
ISO 34-1
DIN ISO 815-1
VW PV 3307
DIN ISO 2285
ISO 3384
ISO 6914
Temperature
Humidity
-70 °C - 250 °C
10 % - 98 % r.h.
(in the range of
5 °C - 95 °C)
1K
5 % r.h.
DIN ISO 1817
DIN 53508
DIN 50018
DIN EN ISO 9227
DIN EN ISO 4892-2
VW PV 1200
DIN 53509-1
ISO 1431
Resistance
Up to 10 Ohm
5 % of value
DIN IEC 60093
Mass
Force
Distance
Time
Hardness
- Shore A
- Shore D
- IRHD
- IRHD Mikro
- Vickers
- Brinell
0,1 mg - 8 kg
0,2 N - 200 kN
0,1 µm - 1.000 mm
>1 s
0,1 % of value
Class 0,5
Class 0,5
0,5 % of value
10-90
20-90
30-100
30-100
HV 1 - HV 30
up to 1,839 kN
(HBW 2,5/ 187,5)
1
1
1
1
2 % of value
2 % of value
ISO 7619-1
DIN EN ISO 6507-1
DIN EN ISO 24343-1
DIN EN ISO 1183-1
DIN EN ISO 2178
ISO 4649
DIN 53122
DIN 53536
DIN EN ISO 6179
DIN 75201
DIN 53512
ISO 4662
ASTM E 1294
11
lowest reachable uncertainty of measurement
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
2/16
Annex to the accreditation certificate D-PL-18498-01-00
Type of tests
Test statistic
Range of measurement
Uncertainty of
1)
measuments
Exemplary standard
Investigation on
physical properties
 Flow and melt index
 Brittleness point
 Crystallization
 DSC
Temperature
Heat quantity
-100 °C - 600 °C
1K
5% of value
DIN EN ISO 1133
DIN ISO 812
ISO 11357-2
1)
1
lowest reachable uncertainty of measurement
Deformation and strength properties
ASTM D 395
2003
Standard Test Methods for Rubber Property - Compression Set
ASTM D 412a
2006
(reapproved 2007)
Standard Test Methods for Vulcanized Rubber and Thermoplastic
Elastomers-Tension
ASTM D 624
2000
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D 638
2010
Standard Test Method for Tensile Properties of Plastics
ASTM D 695
2010
Standard Test Method for Compressive Properties of Rigid Plastics
DIN 3761-13
1984-01
Rotary shaft lip type seals for automobils - Test for curing state of
elastomers
DIN 53357
1982-10
Testing of plastics sheets - Adhesion test
DIN 53363
2003-10
Testing of plastic films - Tear test using trapezoidal test specimen
with incision
DIN 53504
2009-10
Testing of rubber - Determination of tensile strength at break,
tensile stress at yield, elongation at break and stress values in a
tensile test
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
3/16
Annex to the accreditation certificate D-PL-18498-01-00
DIN 53530
1981-02
Testing of organic materials - Separation test on fabric plies
bonded together
DIN EN 29073-3
1992-08
Textiles - Test method for nonwovens - Part 3: Determination of
tensile strength and elongation
DIN EN ISO 24345
2012-04
Resilient floor coverings - Determination of peel resistance
DIN EN ISO 24344
2012-04
Resilient floor coverings - Determination of flexibility and deflection
DIN EN ISO 13934-2
1999-04
Textiles - Tensile properties of fabrics - Part 2: Determination of
maximum force using the grab method
DIN EN ISO 13937-2
2000-06
Textiles - Tear properties of fabrics - Part 2: Determination of tear
force of trouser-shaped test specimens (single tear method)
DIN EN ISO 178
2011-04
Plastics - Determination of flexural properties
DIN EN ISO 1798
2008-04
Flexible cellular polymeric materials - Determination of tensile
strength and elongation at break
DIN EN ISO 1856
2008-01
Flexible cellular polymeric materials - Determination of compression set
DIN EN ISO 3386-1
2010-09
Polymeric materials, cellular flexible - Determination of stressstrain characteristics in compression - Part 1: Low-density
materials
DIN EN ISO 3386-2
2010-09
Flexible cellular polymeric materials - Determination of stressstrain characteristics in compression - Part 2: High-density
materials
DIN EN ISO 527-1
2012-06
Plastics - Determination of tensile properties - Part 1: General
principles
DIN EN ISO 527-2
2012-06
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
4/16
Annex to the accreditation certificate D-PL-18498-01-00
DIN EN ISO 527-3
2003-07
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
DIN EN ISO 527-4
1997-07
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites
DIN EN ISO 604
2003-12
Plastics - Determination of compressive properties
DIN EN ISO 6892-1
2009-12
Metallic materials - Tensile testing - Part 1: Method of test at
room temperature
DIN ISO 2285
2010-07
Rubber, vulcanized or thermoplastic - Determination of tension
set under constant elongation, and of tension set, elongation and
creep under constant tensile load
DIN ISO 3384
2008-07
Rubber, vulcanized or thermoplastic - Determination of stress
relaxation in compression at ambient and at elevated temperatures
DIN ISO 34-1
2004-07
Rubber, vulcanized or thermoplastic - Determination of tear
strength - Part 1: Trouser, angle and crescent test pieces
DIN ISO 6133
2004-05
Rubber and plastics - Analysis of multipeak traces obtained in
determination of tear strength and adhesion strength
DIN ISO 815-1
2010-09
Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 13937-2
2000-04
Textiles - Tear properties of fabrics - Determination of tear force
of trouser - Shaped test specimens
ISO 178
2010-12
Plastics - Determination of flexural properties
ISO 1798
2008-02
Flexible cellular polymeric materials - Determination of tensile
strength and elongation at break
ISO 1856
2000-11
Flexible cellular polymeric materials - Determination of compression set
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
5/16
Annex to the accreditation certificate D-PL-18498-01-00
ISO 1926
2009-12
Cellular plastics - Determination of tensile properties of rigid
materials
ISO 3384
2011-12
Rubber, vulcanized or thermoplastic - Determination of stress
relaxation in compression at ambient and at elevated temperatures
ISO 3386-1
1986-06
Polymeric materials, cellular flexible - Determination of stressstrain characteristic in compression - Low-density materials
ISO 3386-2
1997-06
Polymeric materials, cellular flexible - Determination of stressStrain characteristic in compression - High-density materials
ISO 34-1
2010-09
Rubber, vulcanized or thermoplastic - Determination of tear
strength - Part 1: Trouser, angle and crescent test pieces
ISO 37
2011-12
Rubber, vulcanized or thermoplastic - Determination of tensile
stress-strain properties
ISO 527-1
2012-02
Plastics - Determination of tensile properties - General principles
ISO 527-2
2012-02
Plastics - Determination of tensile properties - Test conditions for
molding and extrusion plastics
ISO 527-3
1995-08
Plastics - Determination of tensile properties - Test conditions for
films and sheets
ISO 604
2002-03
Plastics - Determination of compressive properties
ISO 6914
2008-09
Rubber, vulcanized or thermoplastic - Determination of ageing
characteristics by measurement of stress relaxation
ISO 8307
2007-12
Flexible cellular polymeric materials - Determination of resilence
VDA 675205
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Identifikation - Spannungs-Dehnungs-Verhalten - Zugversuch
VDA 675210
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Spannungs-Dehnungs-Verhalten - Weiterreißversuch (Graves)
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
6/16
Annex to the accreditation certificate D-PL-18498-01-00
VDA 675211
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Spannungs-Dehnungs-Verhalten - Weiterreißversuch (Streifenprobe)
VDA 675216
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Kriechen und Relaxation - Druckverformungsrest
VDA 675217
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Kriechen und Relaxation - Zugverformungsrest
VDA 675218
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Kriechen und Relaxation - Plastische und
elastische Verformung
VDA 675220
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Kriechen und Relaxation - Rückstellverhalten
nach konstanter Verformung
VDA 675221
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Kriechen und Relaxation - Bleibende Verformung nach Kurzzeit-Verformung
VDA 675226
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Trennversuche - Trennversuch Gewebe Elastomer
VW Prüfvorschrift
PV 3307
1998-05
Elastomere - Plastische und elastische Verformbarkeit
2
Environmental exposure and resistance
ASTM D 471
2012
Standard Test Methods for Rubber Property - Effect of Liquids
ASTM D 573
2004
Standard Test Methods for Rubber - Deterioration in an Air Oven
DIN 50018
2012-05
Testing in a saturated atmosphere in the presence of sulfur
dioxide
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
7/16
Annex to the accreditation certificate D-PL-18498-01-00
DIN 53428
1986-08
Determination of the behaviour of cellular plastics when exposed
to fluids, vapours and solids
DIN ISO 1431-1
2011-05
Rubber, vulcanized or thermoplastic - Resistance to ozone
cracking - Part 1: Static and dynamic strain testing
DIN 53509-1
2001-01
Testing of rubber - Determination of resistance to ozone cracking Part 1: Static conditions
(withdrawn standard)
DIN EN ISO 105-B04
1997-05
Textiles - Tests for colour fastness - Part B04: Colour fastness to
artificial weathering: Xenon arc fading lamp test
DIN EN ISO 105-B06
2004-07
Textiles - Tests for colour fastness - Part B06: Colour fastness and
ageing to artificial light at high temperatures: Xenon arc fading
lamp test
DIN EN ISO 105-B02
2011-03
Textiles - Tests for colour fastness - Part B02: Colour fastness to
artificial light: Xenon arc fading lamp test
DIN EN ISO 2440
2010-06
Flexible and rigid cellular polymeric materials - Accelerated ageing
tests
DIN EN ISO 4892-2
2009-11
Plastics - Methods of exposure to laboratory light sources - Part 2:
Xenon-arc lamps
DIN EN ISO 6270-2
2005-09 +
Corrigenda 1
2007-10
Paints and varnishes - Determination of resistance to humidity Part 2: Procedure for exposing test specimens in condensationwater atmospheres
DIN EN ISO 6988
1997-03
Metallic and other non-organic coatings - Sulfur dioxide test with
general condensation of moisture
DIN EN ISO 9227
2012-09
Corrosion tests in artificial atmospheres - Salt spray tests
DIN ISO 1817
2008-08
Rubber, vulcanized - Determination of the effect of liquids
ISO 105-B06
1998-11
Textiles - Test for colour fastness - Part B06: Colour fastness and
ageing to artificial light at high temperatures: Xenon arc fading
lamp test
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
8/16
Annex to the accreditation certificate D-PL-18498-01-00
ISO 1431-1
2012-08
Rubber, vulcanized or thermoplastic - Resistance to ozone
cracking - Part 1: static and dynamic strain testing
ISO 1817
2011-09
Rubber, vulcanized - Determination of the effect of liquids
ISO 2440
1997-09
Flexible cellular polymeric materials - Accelerated ageing tests
NF ISO 1431-1
2007-04
Caoutchouc vulcanisé ou thermoplastique - Résistance au
craquelage par l´ozone
VDA 621-415
1982-02
Prüfung des Korrosionsschutzes von Kraftfahrzeuglackierungen bei
zyklisch wechselnder Beanspruchung
VDA 675301
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Beständigkeitsprüfung - Einwirkung von Prüfölen
VDA 675302
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Beständigkeitsprüfung - Einwirkung von Prüfkraftstoffen
VDA 675303
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Beständigkeitsprüfung - Einwirkung von Kühlflüssigkeiten
VDA 675304
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Beständigkeitsprüfung - Einwirkung von Bremsflüssigkeiten
VDA 675305
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Beständigkeitsprüfung - Einwirkung von Prüffetten
VDA 675306
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Beständigkeitsprüfung - Einwirkung von Kältemitteln
VDA 675310
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Beständigkeitsprüfung - Wärmealterung
VDA 675311
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Beständigkeitsprüfung - Einwirkung von Ozon
VDA 675312
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Beständigkeitsprüfung - Künstliche Bewitterung
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
9/16
Annex to the accreditation certificate D-PL-18498-01-00
VDA 75202
2001-08
Werkstoffe der Kraftfahrzeug-Innenausstattung - Farbechtheitsprüfung und Alterungsverhalten gegen Licht bei hohen Temperaturen - Xenonbogenlicht
VDA 75202
2001-08
Werkstoffe der Kraftfahrzeug-Innenausstattung - Farbechtheitsprüfung und Alterungsverhalten gegen Licht bei hohen Temperaturen - Xenonbogenlicht
VW Prüfvorschrift PV 1200
1987-02
Aggregate, Bauelemente, Systeme, Halbzeuge - Klimawechseltest
VW Prüfvorschrift PV 1210
2010-02
Karosserie und Anbauteile - Korrosionsprüfung
VW Prüfvorschrift PV 3929
2008-03
Nichtmetallische Werkstoffe - Bewitterung in trocken-heißem
Klima
VW Prüfvorschrift PV 1303
2001-03
Nichtmetallische Werkstoffe - Belichtungsprüfung für Bauteile des
Fahrzeuginnenraumes
VW Prüfvorschrift PV 3930
1993-11
Nichtmetallische Werkstoffe - Bewitterung in feucht-warmem
Klima
3
Voltage and resistance changes
DIN 54345-1
1992-02
Testing of textiles - Electrostatic behavior - Determination of
electrical resistance
DIN EN 1081
1998-04
Resilient floor coverings - Determination of the electrical resistance
DIN EN 1149-1
2006-09
Protective clothing - Electrostatic properties - Part 1: Test method
for measurement of surface resistivity
DIN EN 1149-2
1997-11
Protective clothing - Electrostatic properties - Part 2: Test method
for measurement of the electrical resistance through a material
(vertical resistance)
DIN EN 61340-4-1
2004-12
Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
10/16
Annex to the accreditation certificate D-PL-18498-01-00
DIN IEC 60093
1993-12
Methods of test for insulating materials for electrical purposes volume resistivity and surface resistivity of solid electrical insulating materials
DIN IEC 60167
1993-12
Methods of test for insulating materials for electrical purposes insulation resistance of solid materials
ISO 14309
2011-09
Rubber, vulcanized or thermoplastic - Determination of volume
and/or surface resistivity
4
Physical testing
ASTM D 1415
2006
Standard Test Methods for Rubber Property - International Hardness
ASTM D 2240
2005
Standard Test Methods for Rubber Property - Durometer Hardness
ASTM E 1294
1989
Standard Test Method for Pore Size Characteristics of Membrane
Filters - Using Automated Liquid Porosimeter
(withdrawn document)
DIN 3761-12
1984-01
Rotary shaft lip type seals for automobils - Test - Determination
of indentation hardness of elastomers - Micro hardness test
DIN 53122-1
2001-08
Testing of plastics and elastomer films, paper, board and other
sheet materials - Determination of water vapour transmission Part 1: Gravimetric method
DIN 53512
2000-04
Testing of rubber - Determination of rebound resilience (Schob
pendulum)
DIN 53536
1992-10
Testing of rubber - Determination of gas permeability
DIN 53754
1977-06
Testing of plastics - Determination of abrasion, abrasive disk
method
DIN 75201
2011-11
Determination of the fogging characteristics of trim materials in
the interior of automobiles
DIN EN ISO 23999
2012-04
Resilient floor coverings - Determination of dimensional stability
and curling after exposure to heat
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
11/16
Annex to the accreditation certificate D-PL-18498-01-00
DIN EN ISO 23996
2012-04
Resilient floor coverings - Determination of density
DIN EN ISO 1183-1
2004-05
Plastics - Methods for determining the density of non-cellular
plastics - Part 1: Immersion method, liquid pyknometer method
and titration method
DIN EN ISO 6179
2010-08
Rubber, vulcanized or thermoplastic - Rubber sheets and rubbercoated fabrics - Determination of transmission rate of volatile
liquids (gravimetric technique)
DIN EN ISO 6506-1
2006-03
Metallic materials - Brinell hardness test - Part 1: Test method
DIN EN ISO 6507-1
2006-03
Metallic materials - Vickers hardness test - Part 1: Test method
DIN EN ISO 845
2009-10
Cellular plastics and rubbers - Determination of apparent density
DIN EN ISO 868
2003-10
Plastics and ebonite - Determination of indentation hardness by
means of a durometer (Shore hardness)
DIN EN ISO 9073-2
1997-02
Textiles - Test methods for nonwovens - Part 2: Determination of
thickness
DIN ISO 4649
2006-11
Rubber, vulcanized or thermoplastic - Determination of abrasion
resistance using a rotating cylindrical drum device
DIN ISO 23529
2012-10
Rubber - General procedures for preparing and conditioning test
pieces for physical test methods
DIN ISO 48
2009-10
Rubber, vulcanized or thermoplastic - Determination of hardness
(hardness between 10 IRHD and 100 IRHD)
GME 60260
1984-01
Test Method - Determination of the Permeability of Elastomers
to Liquids or Vapours
Prüfverfahren - Bestimmung der Durchlässigkeit von Flüssigkeiten
und Dämpfen durch Elastomere
ISO 1183-1
2012-05
Plastics - Methods for determining the density of non-cellular
plastics - Part 1: Immersion method, liquid pyknometer and
titration method
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
12/16
Annex to the accreditation certificate D-PL-18498-01-00
ISO 23529
2010-10
Rubber - General procedures for preparing and conditioning test
pieces for physical test methods
ISO 4649
2010-09
Rubber - Determination of abrasion resistance using a rotation
cylindrical drum device
ISO 4662
2009-08
Rubber, vulcanized or thermoplastic - Determination of rebound
resilience
ISO 48
2010-09
Rubber, vulcanized or thermoplastic - Determination of hardness
(hardness between 10 IRHD and 100 IRHD)
ISO 6452
2007-06
Rubber- or plastics-coated fabrics - Determination of fogging
characteristics of trim materials in the interior of automobiles
ISO 7619-1
2010-10
Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 845
2006-12
Cellular plastics and rubbers - Determination of apparent density
ISO 868
2003-03
Plastics and ebonite - Determination of indentation hardness by
means of a durometer (shore hardness)
ISO 9073-2
1995-03
Textiles - Test methods for nonwovens - Determination of thickness
ISO 9352
2012-04
Plastics - Determination of resistance to wear by abrasive wheels
VDA 675101
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Identifikation - Härte, Mikrohärteprüfung (IRHD)
VDA 675102
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Identifikation - Härte, Shore A
VDA 675106
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Identifikation - Dichte (Verfahren A)
VDA 675201
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Härte, Mikrohärteprüfung (IRHD)
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
13/16
Annex to the accreditation certificate D-PL-18498-01-00
VDA 675202
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Shore A und D
VDA 675219
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Kriechen und Relaxation, Rückprallelastizität
VDA 675235
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Reibung und Verschleiß, Abrieb
VDA 675245
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Durchlässigkeit von Flüssigkeiten und
Dämpfen durch Elastomere
VW Prüfvorschrift PV 3015
1994-05
Nichtmetallische Werkstoffe der Innenausstattung - Bestimmung
der kondensierbaren Bestandteile (G)
VW Prüfvorschrift PV 3920
1991-01
Nichtmetallische Werkstoffe der Innenausstattung - Bestimmung
des Foggingwertes (F)
VW Prüfvorschrift VW 2.8.1
2011-02
Elastomere - Werkstoffanforderungen und -prüfungen
5
Investigation on physical properties
ASTM D 1053-92a
1992
(reapproved 2007)
Standard Test Methods for Rubber Property - Stiffening at Low
Temperatures: Flexible Polymers and Coated Fabrics
ASTM D 2137
2011
Standard Test Methods for Rubber Property - Brittleness Point of
Flexible Polymers and Coated Fabrics
ASTM D 746-95
2007
Standard Test Method for Brittleness Temperature of Plastics and
Elastomers by Impact
DIN 3761-15
1984-01
Rotary shaft lip type seals for automobile - Test - Determination of
cold resistant of elastomers - Differential-thermoanalysis
DIN 53541
1980-01
Rubber - Determination of crystallization effects by hardness
measurements
(withdrawn standard)
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
14/16
Annex to the accreditation certificate D-PL-18498-01-00
DIN 53548
1983-01
Testing of rubber - Determination of the freezing behaviour of
vulcanized rubbers by moduls-temperature measurement
(Gehman test)
DIN 53765
1994-03
Testing of plastics and elastomeres - Thermal analysis - DSCmethod
DIN ISO 812
2009-09
Rubber, vulcanized or thermoplastic - Determination of lowtemperature brittleness
ISO 11357-2
1999-03
Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature
ISO 1432
1988-12
Rubber, vulcanized or thermoplastic - Determination of low
temperature stiffening (Gehman test)
ISO 812
2011-11
Rubber, vulcanized or thermoplastic - Determination of lowtemperature brittleness
VDA 675115
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Identifikation - Kältemerkmale, Differenz-Thermoanalyse (DTA)
VDA 675116
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Identifikation - Kältemerkmale, Differenz-Scanning-Kalorimetrie (DSC)
VDA 675255
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Temperatureinfluss, Kristallisationsverhalten
VDA 675256
1992-12
Elastomer-Bauteile in Kraftfahrzeugen - Prüfverfahren zur Eigenschaftsbestimmung - Temperatureinfluss, Differenz-Thermoanalyse
DIN EN ISO 1133-1
2012-03
Plastics - Determination of the melt mass-flow rate (MFR) and
melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard
method
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
15/16
Annex to the accreditation certificate D-PL-18498-01-00
abbreviations used:
ASTM
GME
IEC
NF
PV
VDA
VW
American Society for Testing and Materials
General Motors Engineering Standards Europe
International Electrotechnical Commission
Norme française
Firmennorm VW
(Business Standard VW)
Verband der Automobilindustrie
(German Association of the Automotive Industry)
Volkswagen
Period of validity: 08.01.2016 to 19.03.2018
Date of issue: 25.01.2016
- Translation -
16/16