MVP - TCODE - PRO
Powered by ADVANCED DIAGNOSTICS USA
CHRYSLER
(Chrysler - Dodge - Jeep - Plymouth)
• Chrysler Basic:
(ADS-113)
Type 1, 2, Pacifica Systems
• Chrysler CAN:
(ADS-156)
CAN 1, 2, 3, 4 & 5 Systems, FOBIK Original & FOBIK ‘A’ & ‘B’ Systems
• Chrysler FOBIK 2010:
(ADS-173)
FOBIK ‘B’ Systems
• Chrysler PIN Read:
(ADS-157)
• Chrysler Remotes:
(Included in ADS-113)
PIN Read for Type 2 & CAN 2-5 Systems
Remote Programming for Type 1 & 2 Systems
• Chrysler PROXIMITY:
(ADS-178)
GEN4 RFH & KEYLESS GO
• Dodge 2013:
(ADS-195)
2013 DODGE DART, RAM, 2014 JEEP GRAND CHEROKEE
(Optional software on some TCode units)
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
93
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
Chrysler - Dodge - Jeep - Plymouth
All Chrysler products require a PIN Code to Erase & Program keys.
Here is the breakdown for what is needed for the different systems.
• Type 1, Type 2, PACIFICA Systems:
A 4-digit number PIN Code is required from the dealer or N.A.S.T.F (nastf.org)
On Type1 cars the Immo box can be removed and AD-38 tool (option device
sold by advanced Diagnostics) can used to get the PIN CODE.
On 2001 & up Type2 cars the PIN CODE can be read out via the OBD port.
(Requires ADS-157 Software) on TCODE
All Pacifica systems require a PIN CODE and it CANNOT be read from the
vehicle via the OBD port.
• Sebring & Stratus 2Door Hardtop Systems:
This car is made by Mitsubishi and is the same platform as the Mitsubishi
Eclipse. The PIN Code is built into the MVP & TCODE for key programming
and is NOT needed by you.
• CAN 1-5 Systems:
A 4-digit number PIN Code is required. It can be read via the OBD port in most
cases. (Requires ADS-157 Software on TCODE)
• FOBIK CAN Systems:
FOBIK system was introduced in 2008 on selected models by Chrysler. The
ignitions are now plastic electronic modules with no actual lock parts such as
tumblers. All models will use a similar looking remote type “key”. From 3 buttons all the way up to 7 buttons, depending on options. A 4-digit number PIN
Code is required. The PIN can be read from the vehicle in most cases.
94
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
Standard Chrysler
Type
MVP &
TCODE
1
- Erase Keys - Erase Keys - Erase Keys VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
> IMMOBILISER
REMOTE
VEHICLE SELECTION
SEBRING 2DR HTP
> TYPE 1
TYPE 2
PACIFICA
CHRYSLER CAN
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
DIAGNOSTIC MENU
> CLEAR KEYS
PROGRAM KEYS
SKIM PROGRAMMING
SECURITY CODE
____
SECURITY CODE
SWITCH IGNITION ON
8297
PRESS ENTER KEY
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
ECU IDENTIFICATION
CHRYSLER 94-98
PRESS ENTER KEY
CLEAR KEYS
PROCEDURE COMPLETE
Note:
If you have CLEARED the keys
(erased); it will be necessary to
program in any keys that you
want to operate.
Programming keys is outlined on
the next page.
This is just an example, each vehicle
is different. You need to get the PIN
Code from the Dealer or Cross Country
Road Service. Tech Support CANNOT
provide a PIN Code for this type.
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
95
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
Standard Chrysler
Type
powered
by
1
- Program Keys - Program Keys - Program Keys VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
> IMMOBILISER
REMOTE
VEHICLE SELECTION
SEBRING 2DR HTP
> TYPE 1
TYPE 2
PACIFICA
CHRYSLER CAN
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
PROGRAMMING KEYS
KEY PROGRAMMED
ENTER - PROG. MORE KEYS
BACK - EXIT ROUTINE
DIAGNOSTIC MENU
CLEAR KEYS
> PROGRAM KEYS
SKIM PROGRAMMING
PROGRAMMING KEYS
SWITCH IGNITION ON
WITH NEW KEY
PRESS ENTER KEY
SECURITY CODE
SWITCH IGNITION ON
____
PRESS ENTER KEY
ECU IDENTIFICATION
CHRYSLER 94-98
PRESS ENTER KEY
96
SECURITY CODE
8297
This is just an example, each vehicle
is different. You need to get the PIN
Code from the Dealer or Cross Country
Road Service. Tech Support CANNOT
provide a PIN Code for this type.
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
Standard Chrysler
Type
M V Ppowered
&
by
TCODE
2
- Erase Keys - Erase Keys - Erase Keys VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
> IMMOBILISER
REMOTE
VEHICLE SELECTION
SEBRING 2DR HTP
TYPE 1
> TYPE 2
PACIFICA
CHRYSLER CAN
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
DIAGNOSTIC MENU
> CLEAR KEYS
PROGRAM KEYS
SKIM PROGRAMMING
SECURITY CODE
____
SECURITY CODE
SWITCH IGNITION ON
8297
PRESS ENTER KEY
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
ECU IDENTIFICATION
CHRYSLER 98-03
PRESS ENTER KEY
CLEAR KEYS
PROCEDURE COMPLETE
Note:
If you have CLEARED the keys
(erased); it will be necessary to
program in any keys that you
want to operate.
Programming keys is outlined on
the next page.
This is just an example, each vehicle
is different. You need to get the PIN
Code from the Dealer or Cross Country
Road Service. Tech Support CANNOT
provide a PIN Code for this type.
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
97
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
Standard Chrysler
Type
M V Ppowered
&
by
TCODE
2
- Program Keys - Program Keys - Program Keys VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
> IMMOBILISER
REMOTE
VEHICLE SELECTION
SEBRING 2DR HTP
TYPE 1
> TYPE 2
PACIFICA
CHRYSLER CAN
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
PROGRAMMING KEYS
KEY PROGRAMMED
ENTER - PROG. MORE KEYS
BACK - EXIT ROUTINE
DIAGNOSTIC MENU
CLEAR KEYS
> PROGRAM KEYS
SKIM PROGRAMMING
PROGRAMMING KEYS
SWITCH IGNITION ON
WITH NEW KEY
PRESS ENTER KEY
SECURITY CODE
SWITCH IGNITION ON
____
PRESS ENTER KEY
ECU IDENTIFICATION
CHRYSLER 98-03
PRESS ENTER KEY
98
SECURITY CODE
8297
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
This is just an example, each vehicle
is different. You need to get the PIN
Code from the Dealer or Cross Country
Road Service. Tech Support CANNOT
provide a PIN Code for this type.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
Sebring & Stratus 2Door Hardtop
- Program Keys - Program Keys - Program Keys VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
> IMMOBILISER
REMOTE
VEHICLE SELECTION
> SEBRING 2DR HTP
TYPE 1
TYPE 2
PACIFICA
CHRYSLER CAN
SWITCH IGNITION ON
PRESS ENTER KEY
NOTE :
No PIN needed on this car.
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
NOTE : To Program Keys
select that menu choice.
To see how many keys are
currently programmed; select
that menu choice.
DIAGNOSTIC MENU
PROGRAMMED KEYS
> PROGRAM KEYS
NOTE : All current keys will
be erased.
Re-program any you wish to
continue to work along with
any new ones.
PROGRAM KEYS
KEYS PROGRAMMED: 1
BACK’ TO EXIT
ENTER TO PROGRAM
NEXT KEY
NOTE : To Program more
than 1 key, press the Enter
button and follow the Device
on-screen prompts.
PROGRAM KEYS
INSERT NEXT KEY
SWITCH IGNITION ON
AND THEN PRESS ENTER
WITHIN 5 SECONDS
PROGRAM KEYS
KEYS PROGRAMMED: 2
BACK’ TO EXIT
ENTER TO PROGRAM
NEXT KEY
PROGRAM KEYS
.......
Do not use any adaptor for
this model, just the ADC110.B
or ADC110.C12 cable.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
99
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
Sebring & Stratus 2Door Hardtop
- Errors & Faults - Errors & Faults - Errors & Faults READ
FAULT CODES
CLEAR
FAULT CODES
DIAGNOSTIC MENU
DIAGNOSTIC MENU
ECU IDENTIFICATION
> FAULT CODES
SPECIAL FUNCTIONS
ECU IDENTIFICATION
> FAULT CODES
SPECIAL FUNCTIONS
ERROR IN
PROGRAMMING KEY
PROGRAM KEYS
ERROR
PRESS ENTER KEY
DIAGNOSTIC MENU
> READ FAULT CODES
CLEAR FAULT CODES
PRESS ENTER KEY
Depending on how many fault
codes are set will depend
on how many screens are
displayed. One example is
shown below.
DISPLAY FAULT CODES
FAULT CODE: 9601
WRONG KEY CODE
PRESS ENTER KEY
100
DIAGNOSTIC MENU
READ FAULT CODES
> CLEAR FAULT CODES
PRESS ENTER KEY
To Clear Fault Codes, select
it from the Menu, as shown
below.
CLEAR FAULT CODES
PROCEDURE COMPLETE
PRESS ENTER KEY
There are two possible reasons you may see an
ERROR screen.
1) You are using the wrong
key, this is the most common.
Make sure your keys have an
“N” stamped on the blade.
2) The Immobilizer System is
locked. This occurs when you
try to access the system too
many times or have selected
the wrong menu choice.
To unlock the system;
A) Disconnect the Device
from the OBD2 port.
B) Leave the key turned to
the ON position for at least
1 hour. Use a jumper box to
prevent battery drain for 1
hour. After 1 hour remove key
and start programming again.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
MVP &
TCODE
CHRY - DODGE - JEEP
Chrysler PACIFICA System
- Program Keys - Program Keys - Program Keys VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
> IMMOBILISER
REMOTE
ECU IDENTIFICATION
PACIFICA / CARAVAN
PRESS ENTER KEY
8297
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
DIAGNOSTIC MENU
NOTE : You will need to use
the Type 2 Adaptor; ADC138.
SECURITY CODE
CLEAR KEYS
> PROGRAM KEYS
This is just an example, each vehicle
is different. You need to get the PIN
Code from the Dealer or Cross Country
Road Service. Tech Support CANNOT
provide a PIN Code for this type.
PROGRAMMING KEYS
KEY PROGRAMMED
VEHICLE SELECTION
SEBRING 2DR HTP
TYPE 1
TYPE 2
> PACIFICA
CHRYSLER CAN
PROGRAMMING KEYS
ENTER - PROG. MORE KEYS
BACK - EXIT ROUTINE
SWITCH IGNITION ON
WITH NEW KEY
PRESS ENTER KEY
SECURITY CODE
SWITCH IGNITION ON
____
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
101
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
Chrysler PACIFICA System
- Erase Keys - Erase Keys - Erase Keys VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
> IMMOBILISER
REMOTE
ECU IDENTIFICATION
PACIFICA / CARAVAN
VEHICLE SELECTION
SEBRING 2DR HTP
TYPE 1
TYPE 2
> PACIFICA
CHRYSLER CAN
PROCEDURE COMPLETE
PRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
DIAGNOSTIC MENU
NOTE : You will need to use
the Type 2 Adaptor; ADC138.
CLEAR KEYS
PRESS ENTER KEY
Note:
If you have CLEARED the keys
(erased); it will be necessay to
program in any keys that you
want to operate.
Programming keys is outlined on
the next page.
> CLEAR KEYS
PROGRAM KEYS
SECURITY CODE
____
SECURITY CODE
102
SWITCH IGNITION ON
8297
PRESS ENTER KEY
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
This is just an example, each vehicle
is different. You need to get the PIN
Code from the Dealer or Cross Country
Road Service. Tech Support CANNOT
provide a PIN Code for this type.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
Chrysler PACIFICA System
- Fault Codes - Fault Codes - Fault Codes • Fault Codes is a way for the vehicle to report problems it has with hardware on it.
• A problem with the fuel pump would be a hardware problem. The fault code would have an ID and a short description
•
•
of the problem.
Transponder keys and parts that make up the transponder system have fault codes associated with them.
If everything is working fine there should be no fault codes.
VEHICLE SELECTION
SEBRING 2DR HTP
TYPE 1
TYPE 2
> PACIFICA
CHRYSLER CAN
DISPLAY FAULT CODES
DIAGNOSTIC MENU
> READ FAULT CODES
CLEAR FAULT CODES
NO FAULTS
PRESS ENTER KEY
DISPLAY FAULT CODES
SWITCH IGNITION ON
FAULT CODE: 5
KEY
UNPROGRAMMED
PRESS ENTER KEY
PRESS ENTER KEY
ECU IDENTIFICATION
PACIFICA / CARAVAN
PRESS ENTER KEY
DIAGNOSTIC MENU
DIAGNOSTIC MENU
READ FAULT CODES
> CLEAR FAULT CODES
ECU IDENTIFICATION
> FAULT CODES
SPECIAL FUNCTIONS
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
CLEAR FAULT CODES
PROCEDURE COMPLETE
PRESS ENTER KEY
103
MVP - TCODE - PRO
Powered by ADVANCED DIAGNOSTICS USA
Chrysler - Dodge
Jeep
C.A.N. SYSTEMS 1 thru 5
&
FOBIK CAN
ADS-156
PIN Reading Functions for CAN 1 through 5 are contained in
ADS-157 software. See that section for procedures.
(Optional software on some TCode units)
104
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
Chrysler CAN 1 thru 5
Use this method to PROGRAM
VEHICLE SELECTION
CADILLAC
> CHRYSLER
DAEWOO
DODGE
FORD
GM (USA)
VEHICLE SELECTION
> IMMOBILISER
REMOTE
SKIM READ
NEW KEYS
PLEASE WAIT
GAINING ACCESS
CAN 2 Systems can take
up to 4min to gain access.
8297
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
ECU IDENTIFICATION
CHRYSLER CAN
PRESS ENTER KEY
VEHICLE SELECTION
CHRYSLER CAN 1
CHRYSLER CAN 2
CHRYSLER CAN 3
CHRYSLER CAN 4
CHRYSLER CAN 5
CHRYSLER CAN PIN
TOWN & COUNTRY VAN
SECURITY CODE
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
LIVE DATA
> SPECIAL FUNCTIONS
The Security Code is the PIN
code that you need from the
Dealer or from Roadside Service. An example is shown.
PROGRAM KEYS
SUCCESS
PRESS ENTER KEY
DIAGNOSTIC MENU
To determine which CAN
system your vehicle is using
check the KEY-LOOK-UP
GUIDE.
> PROGRAM KEYS
CLEAR KEYS
SECURITY CODE
SWITCH IGNITION ON
____
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
105
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
Chrysler CAN 1 thru 5
Use this method to ERASE KEYS
VEHICLE SELECTION
CADILLAC
> CHRYSLER
DAEWOO
DODGE
FORD
GM (USA)
VEHICLE SELECTION
> IMMOBILISER
REMOTE
SKIM READ
PLEASE WAIT
GAINING ACCESS
CAN 2 Systems can take
up to 4min to gain access.
8297
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
ECU IDENTIFICATION
CHRYSLER CAN
PRESS ENTER KEY
VEHICLE SELECTION
CHRYSLER CAN 1
CHRYSLER CAN 2
CHRYSLER CAN 3
CHRYSLER CAN 4
CHRYSLER CAN 5
CHRYSLER CAN PIN
TOWN & COUNTRY VAN
SECURITY CODE
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
LIVE DATA
> SPECIAL FUNCTIONS
The Security Code is the PIN
code that you need from the
Dealer or from Roadside Service. An example is shown.
ERASE KEYS
SUCCESS
PRESS ENTER KEY
DIAGNOSTIC MENU
To determine which CAN
system your vehicle is using
check the Grid at the beginning of this section.
PROGRAM KEYS
> CLEAR KEYS
SECURITY CODE
SWITCH IGNITION ON
____
PRESS ENTER KEY
106
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
Chrysler CAN Non-Transponder
Use this method to PROGRAM
REMOTE HEAD KEYS
• This procedure is for NON-Transponder equipped vehicles •
To program the remote on a non-transponder vehicle of this type the following
must be performed:
1) Sit in driver’s seat.
2) Make sure all doors are closed.
3) Put seat belt on.
4) Make sure there is nobody else in the front seats.
Once you enter remote programming a chime will be heard. If the above procedure is not performed other chimes may interfere with the remote programming
chime.
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
LIVE DATA
> SPECIAL FUNCTIONS
WARNING
FOLLOW NEXT SCREENS
QUICKLY & CAREFULLY
COMPLETE OPERATION
WITHIN 60 Sec.
AFTER HEARING CHIME
PRESS ENTER KEY
DIAGNOSTIC MENU
PROGRAMMING REMOTES
RE-PROGRAM KEYS
PROGRAM NEW KEYS
ERASE KEYS
> PROGRAM REMOTE
PRESS LOCK & UNLOCK
CHIME WILL BE HEARD
WHEN FOB IS PROGRAM.
REPEAT FOR ALL FOBS
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Press the Lock & Unlock buttons together for 1 second &
then quickly press the Unlock
button for 1 second.
Remember you have limited
time to perform this function.
Press the Enter button when
done.
107
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
CHRYSLER FOBIK CAN
Use this method for ERASING all keys
VEHICLE SELECTION
BMW
CADILLAC
> CHRYSLER
FORD
GM (USA)
HONDA / ACURA
VEHICLE SELECTION
> IMMOBILISER
REMOTE
SKIM READ
VEHICLE SELECTION
PACIFICA
SEBRING 2DR HTP
TYPE 1
TYPE 2
> FOBIK CAN
CHRYSLER CAN 1
CHRYSLER CAN 2
CHRYSLER CAN 3
CHRYSLER CAN 4
CHRYSLER CAN 5
ECU IDENTIFICATION
CHRYSLER
FOBIK
PRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
LIVE DATA
> SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PROGRAM KEYS
> CLEAR KEYS
The Security Code is the PIN
code that you need from the
Dealer or from Roadside Service. An example is shown.
SECURITY CODE
8297
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
ERASE KEYS
SUCCESS
PRESS ENTER KEY
ERASE KEYS
All keys are now erased.
SWITCH IGNITION ON
PRESS ENTER KEY
PLEASE WAIT
GAINING ACCESS
You must now program keys
in order to start the vehicle.
SECURITY CODE
____
CAN Systems can take up
to 4min to gain access.
108
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
CHRYSLER FOBIK CAN
Use this method for ADDING keysVEHICLE SELECTION
BMW
CADILLAC
> CHRYSLER
FORD
GM (USA)
HONDA / ACURA
VEHICLE SELECTION
> IMMOBILISER
REMOTE
SKIM READ
ECU IDENTIFICATION
SECURITY CODE
CHRYSLER
FOBIK
8297
PRESS ENTER KEY
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
DIAGNOSTIC MENU
PROGRAM KEYS
ECU IDENTIFICATION
FAULT CODES
LIVE DATA
> SPECIAL FUNCTIONS
SUCCESS
PRESS ENTER KEY
VEHICLE SELECTION
PACIFICA
SEBRING 2DR HTP
TYPE 1
TYPE 2
> FOBIK CAN
CHRYSLER CAN 1
CHRYSLER CAN 2
CHRYSLER CAN 3
CHRYSLER CAN 4
CHRYSLER CAN 5
DIAGNOSTIC MENU
> PROGRAM KEYS
CLEAR KEYS
SECURITY CODE
____
SWITCH IGNITION ON
PRESS ENTER KEY
PLEASE WAIT
GAINING ACCESS
CAN Systems can take up
to 4min to gain access.
The Security Code is the PIN
code that you need from the
Dealer or from Roadside Service. An example is shown.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
109
MVP - TCODE - PRO
Powered by ADVANCED DIAGNOSTICS USA
Chrysler
FOBIK 2010
ADS-173
Requires previous purchase of ADS156 Original Fobik Software
(Optional software on some TCode units)
110
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
CHRYSLER FOBIK 2010
The Chrysler/Dodge/Jeep Fobik remote system is made up of several different
modules and systems depending on the supplier to Chrysler.
There are variations to the type of system that is used on these vehicles.
The rule of thumb should always be to try the Fobik system we list first and then if
you get an error code, switch to the next Fobik system.
Challenger & other later vehicles may be equipped with an option called “Keyless
Go” that includes a “Push-to-Start” button ignition. For programming - the “Button”
is removed and a Fobik Ignition is behind it.
Check the KEY-LOOK-UP GUIDE for proper system selection.
There may be several different Fobik remote’s depending on exact model,
check with dealer for the correct Fobik by VIN.
MVP User’s Note: Using the MVP to “Read” the PIN number will require 1 Token and
programming the Fobik will require 1 additional token also. If you can get the PIN number from the dealer that will save you a Token.
Once you connect to the vehicle and get security access (Web or SMC) you can go in
and erase and program as many FOBIK as the vehicle allows and use only the one
Token - if you have the pin.
You can also switch systems A or B once you have security access as long as you remain connected, if you unplug of course you have to get security access again.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
111
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
CHRYSLER FOBIK 2010
Use this method to get the PIN
VEHICLE SELECTION
+ AUDI
+ LANDROVER
+ BMW
+ LEXUS
+ CADILLAC
+ MAZDA
+ CHEVROLET
+ MERCEDES
+ CHRYSLER
+ MITSUBISHI
+ DAEWOO USA
+ NISSAN
+ DODGE
+ PONTIAC
+ FORD
+ ROVER
+ GM (USA)
+ SAAB
+ HONDA/ACURA
+ SATURN
+ HYUNDAI
+ SUBARU
+ INFINITI
+ TOYOTA
+ ISUZU
+ V.W. /AUDI GROUP
+ JAGUAR
+ VOLKSWAGEN
+ JEEP
VERSION
+ KIA
p
?
t
q
Code
There are variations to the type of system that is used on these vehicles.
The rule of thumb should always be to
try the Fobik system we list first and
then if you get an error code, switch to
the next Fobik system.
u
SWITCH IGNITION ON
VEHICLE SELECTION
+ IMMOBILISER
+ REMOTE
+ SKIM READING
PRESS ENTER KEY
ECU IDENTIFICATION
VEHICLE SELECTION
VIN: 1D3HV18P79S803764
SKIM READ VPW
SKIM READ CAN 2/3
SKIM READ CAN 1/4/5
SKIM READ FOBIK
p
?
t
Part No.: 05026364AK
PRESS ENTER KEY
q
u
DIAGNOSTIC MENU
VEHICLE SELECTION
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
ORIGINAL
TYPE A
TYPE B
112
p
?
t
q
u
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
CHRYSLER FOBIK 2010
continued . . .
DIAGNOSTIC MENU
> READ PINCODE
May require
Smart Card
WEB SECURITY
ACCESS GRANTED
PRESS ENTER KEY
READ PINCODE
PINCODE: 4477
Now that you have the PIN Code you can
program the Fobik remote(s). Stay
connected and hit Enter and then use the
Back button to get you back to the main
menu to select Chrysler aImmobiliser.
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
113
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
CHRYSLER FOBIK 2010
Use this method for ERASING all Fobik’s
VEHICLE SELECTION
+ AUDI
+ LANDROVER
+ BMW
+ LEXUS
+ CADILLAC
+ MAZDA
+ CHEVROLET
+ MERCEDES
+ CHRYSLER
+ MITSUBISHI
+ DAEWOO USA
+ NISSAN
+ DODGE
+ PONTIAC
+ FORD
+ ROVER
+ GM (USA)
+ SAAB
+ HONDA/ACURA
+ SATURN
+ HYUNDAI
+ SUBARU
+ INFINITI
+ TOYOTA
+ ISUZU
+ V.W. /AUDI GROUP
+ JAGUAR
+ VOLKSWAGEN
+ JEEP
VERSION
+ KIA
p
?
t
q
SWITCH IGNITION ON
+ IMMOBILISER
+ REMOTE
+ SKIM READING
PRESS ENTER KEY
?
p
q
u
VEHICLE SELECTION
Part No.: 05026364AK
PRESS ENTER KEY
?
p
q
u
DIAGNOSTIC MENU
VEHICLE SELECTION
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
ORIGINAL
TYPE A
TYPE B
114
p
?
t
ECU IDENTIFICATION
VIN: 1D3HV18P79S803764
+ FOBIK CAN
PACIFICA
SEBRING 2DR HTP
TYPE 1
TYPE 2
TYPE 3 TEST
t
The rule of thumb should always be to
try the Fobik system we list first and
then if you get an error code, switch to
the next Fobik system.
u
VEHICLE SELECTION
t
There are variations to the type of system that is used on these vehicles.
q
u
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
CHRYSLER FOBIK 2010
continued . . .
DIAGNOSTIC MENU
DIAGNOSTIC MENU
PROGRAM KEYS
> ERASE KEYS
KEYS PROGRAMMED
> PROGRAM KEYS
ERASE KEYS
KEYS PROGRAMMED
SECURITY CODE
Enter ther PIN Code to the vehicle.
____
1
6
2
7
3
8
4
9
5
0
PROGRAM KEYS
PLEASE WAIT
...........
Enter ther PIN Code to the vehicle above.
SECURITY CODE
4477
KEYS PROGRAMMED
(this is just an example)
KEYS PROGRAMMED: 1
X
4
KEYS PROGRAMMED
(Now program any additional Fobik’s)
PRESS ENTER KEY
KEYS PROGRAMMED: 0
(All keys have been erased now go to “Program Keys”)
Check all the Fobiks and your done.
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
115
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
CHRYSLER FOBIK 2010
Use this method to ADD a Fobik
VEHICLE SELECTION
+ AUDI
+ LANDROVER
+ BMW
+ LEXUS
+ CADILLAC
+ MAZDA
+ CHEVROLET
+ MERCEDES
+ CHRYSLER
+ MITSUBISHI
+ DAEWOO USA
+ NISSAN
+ DODGE
+ PONTIAC
+ FORD
+ ROVER
+ GM (USA)
+ SAAB
+ HONDA/ACURA
+ SATURN
+ HYUNDAI
+ SUBARU
+ INFINITI
+ TOYOTA
+ ISUZU
+ V.W. /AUDI GROUP
+ JAGUAR
+ VOLKSWAGEN
+ JEEP
VERSION
+ KIA
p
?
t
q
There are variations to the type of system that is used on these vehicles.
The rule of thumb should always be to
try the Fobik system we list first and
then if you get an error code, switch to
the next Fobik system.
SWITCH IGNITION ON
u
PRESS ENTER KEY
VEHICLE SELECTION
ECU IDENTIFICATION
+ IMMOBILISER
+ REMOTE
+ SKIM READING
VIN: 1D3HV18P79S803764
Part No.: 05026364AK
p
?
t
q
u
PRESS ENTER KEY
VEHICLE SELECTION
+ FOBIK CAN
PACIFICA
SEBRING 2DR HTP
TYPE 1
TYPE 2
TYPE 3 TEST
p
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
?
t
DIAGNOSTIC MENU
q
u
VEHICLE SELECTION
DIAGNOSTIC MENU
ORIGINAL
TYPE A
TYPE B
116
> PROGRAM KEYS
ERASE KEYS
KEYS PROGRAMMED
p
?
t
PRESS ENTER KEY
q
u
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
CHRYSLER FOBIK 2010
continued . . .
WEB SECURITY
PLEASE GAIN
AUTHORISATION
FROM AD
Enter ther PIN Code to the vehicle above.
SECURITY CODE
0021256614 - 3725074853
4477
PRESS ENTER KEY
(this is just an example)
WEB SECURITY
____________________
1
6
2
7
3
8
4
9
X
4
PROGRAM KEYS
5
0
PLEASE WAIT
...........
WEB SECURITY
10436022271799940744
KEYS PROGRAMMED
X
4
KEYS PROGRAMMED: 1
(Now program any additional Fobik’s)
WEB SECURITY
ACCESS GRANTED
PRESS ENTER KEY
Check all the Fobiks and your done.
PRESS ENTER KEY
SECURITY CODE
____
1
6
2
7
3
8
4
9
5
0
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
117
MVP - TCODE - PRO
Powered by ADVANCED DIAGNOSTICS USA
Chrysler-Dodge-Jeep
ADS-157
Type 2 (2001 & Up Models)
& CAN Systems
PIN READING
& Other Functions
(Optional software on some TCode units)
118
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
CHRY ADS-157 PIN READ
‘Type 2’ Systems (2001 & Up)
To Start out You will need a Metal Key and a
Un-Programmed (Virgin)‘Y160-PT’ (692325)
key cut to the vehicle’s ignition lock.
Metal Key
Virgin Transponder Key
VEHICLE SELECTION
BMW
CADILLAC
> CHRYSLER
DODGE
FORD
SWITCH IGNITION ON
IMMOBILISER
REMOTE
> SKIM READING
VEHICLE SELECTION
READ
READ
READ
READ
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
PRESS ENTER KEY
VEHICLE SELECTION
> SKIM
SKIM
SKIM
SKIM
DIAGNOSTIC MENU
VPW
CAN 2/3
1/4/5
FOBIK
Make sure you have a
non-transponder key (brass
key) in the ignition and
turned all the way on to the
“Run” position.
Then press “Enter”
ECU IDENTIFICATION
SKIM READ VPW
DIAGNOSTIC MENU
> PIN FUNCTIONS
VIN NUMBER
MATCHING FUNCTIONS
ANTI THEFT LOCKOUT
VIRGINIZE SKIM
PIN FUNCTIONS
> READ PINCODE
CHANGE PIN CODE
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
119
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
CHRY ADS-157 PIN READ
‘Type 2’ Systems (2001 & Up)
READ PINCODE
READ PINCODE
PLEASE HAVE ALL
UNPROGRAMMED KEYS
CUT
PROCEED?
IGNITION ON
WITH AN
UNPROGRAMMED
KEY
YES=ENTER
NO=BACK
READ PINCODE
VEHICLE ID
SUPPORTED
READ PINCODE
REMOVE KEY FROM IGN
IGNITION ON
WITH A BRASS KEY
PRESS ENTER KEY
Remove the non-transponder
key (brass key) from the
ignition and wait a couple
of seconds and then insert it
again turn it all the way on to
the “Run” position. Then press
“Enter”
PRESS ENTER KEY
(this could take a minute or more)
120
SKIM CODE 0620
(this is an example)
PRESS ENTER KEY
Remove the (brass key) from
the ignition and wait a couple
of seconds and then insert a
unprogrammed transponder
key (Y160-PT or 692325) turn
it all the way on to the “Run”
position.
Then press “Enter”
READ PINCODE
PLEASE WAIT
. . . . .
(this could take a minute or more)
If you get the above error message check the following:
READ PINCODE
NO BRASS KEY DETECT
READ PINCODE
PLEASE WAIT
. . . . .
SKIM CODE READ
1) Make sure you have a non-transponder key in the ignition.
2) Make sure the key is turned all the
way on to the “Run” position.
PRESS ENTER KEY
If you have checked above and still
have this message, just try it again
from the beginning.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
Chrysler SKIM Functions for Type 1 & 2
Procedure for SKIM Functions
The SKIM (Sentry Key Immobilizer Module) is located in the antenna ring. The antenna ring
is what surrounds the ignition lock and makes the data exchange between the transponder
chip in the key and the SKIM.
On some occasions, it may be necessary to replace the SKIM because of damage to the
SKIM and the ignition lock due to a theft attempt. There are some cases of SKIM failure,
resulting in replacement of the module.
SKIM
SKIM
Circuit
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
121
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
CHRY ADS-157 SKIM FUNCTIONS
‘Type 1 or 2’ - SKIM Replaced Feature
VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
> IMMOBILISER
REMOTE
VEHICLE SELECTION
SEBRING 2DR HTP
TYPE 1
TYPE 2
PACIFICA
CHRYSLER CAN
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SKIM PROGRAMMING
SKIM PROGRAMMING
TO PROGRAM SKIM
ENTER VEHICLE
SECURITY CODE,
REGION AND VIN.
If you do not know the PIN
Code to the car - you can
make your own. Only when
you replace the SKIM can you
do this.
SECURITY CODE
1234
PRESS ENTER KEY
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
SECURITY CODE
MARKET OPTIONS
PLEASE SELECT CODE
ENTRY METHOD
> uS
NON US
1. UP DOWN ARROWS
2. PHONE STYLE KEYPAD
VIN
Select the Type you are
working on. Either Type 1 or
Type 2.
Select #1 for the Up & Down
arrow keys.
PLEASE SELECT CODE
ENTRY METHOD
1. UP DOWN ARROWS
2. PHONE STYLE KEYPAD
SECURITY CODE
SWITCH IGNITION ON
0 _ _ _
continued
next page --->
PRESS ENTER KEY
122
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
CHRY ADS-157 SKIM FUNCTIONS
‘Type 1 or 2’ - SKIM Replaced Feature
Select #1 for the Up & Down
arrow keys. This way you will
be able to enter the Letters &
Numbers of the V.I.N.
Make sure you have entered
the VIN to the vehicle you are
working on CORRECTLY or
the SKIM will be ruined and it
will need to be replaced with a
new one.
VIN
SKIM PROGRAMMING
0________________
SECURITY CODE : 4698
MARKET OPTIONS : uS
VIN
3C3EL55H9XT594291
ARE YOU SURE
YES=ENTER
NO=BACK
SKIM PROGRAMMING
To enter the V.I.N. use the Up
& Down arrow buttons.
NOTE:
A Blinking SKIM indicator
light in the instrument cluster
means that the key is not
programmed in the vehicle.
This could mean a bad key
or a key that was already
programmed into another
vehicle already and must be
replaced.
A Solid SKIM indicator light in
the instrument cluster means
that there is a problem with
the SKIM and it might need
replacing. There could also
be a problem with the BCM or
the PCM.
PLEASE WAIT
As you press either the ‘Up’
or ‘Down’ buttons you will see
that the digit in that position
changes to the next digit.
Once you have the correct
letter or number, press the
‘Enter’ button to move the cursor to the next position.
SKIM PROGRAMMING
PROCEDURE COMPLETE
PRESS ENTER KEY
VIN
3C3EL55H9XT594291
IS CODE CORRECT
OK=ENTER
CLEAR=BACK
Now you will need to program
the keys. In most cases the
keys will also have to be
replaced with new ones.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
123
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
CHRY ADS-157 SKIM FUNCTIONS
‘Type 2’ - SKIM Lock Out Timer Reset
Must have a cut brass key and a cut unprogrammed transponder key to continue.
This is the same process as “PIN Read”.
VEHICLE SELECTION
BMW
CADILLAC
> CHRYSLER
DODGE
FORD
ECU IDENTIFICATION
LOCKOUT TIMER RESET
SKIM READ VPW
PLEASE WAIT
. . . . .
(this could take a minute or more)
PRESS ENTER KEY
VEHICLE SELECTION
IMMOBILISER
REMOTE
> SKIM READING
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
LOCKOUT TIMER RESET
IGNITION ON
WITH AN
UNPROGRAMMED
KEY
PRESS ENTER KEY
VEHICLE SELECTION
> SKIM
SKIM
SKIM
SKIM
READ
READ
READ
READ
VPW
CAN 2/3
1/4/5
FOBIK
DIAGNOSTIC MENU
PIN FUNCTIONS
VIN NUMBER
MATCHING FUNCTIONS
> ANTI THEFT LOCKOUT
VIRGINIZE SKIM
LOCKOUT TIMER RESET
SWITCH IGNITION ON
PRESS ENTER KEY
Make sure you have a
transponder key in the ignition and turned all the way
on to the “Run” position.
Then press “Enter”
PLEASE HAVE ALL
UNPROGRAMMED KEYS CUT
PROCEED?
YES=ENTER
NO=BACK
LOCKOUT TIMER RESET
PLEASE WAIT
. . . . .
(this could take a minute or more)
LOCKOUT TIMER RESET
LOCKOUT TIMER RESET
REMOVE KEY FROM IGN
IGNITION ON
WITH A BRASS KEY
SUCCESS
PRESS ENTER KEY
124
Remove the non-transponder key
(brass key) from the ignition and
wait a couple of seconds and then
insert it again turn it all the way on
to the “Run” position. Then press
“Enter”
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
CHRY ADS-157 SKIM FUNCTIONS
‘Type 2’ - Read VIN in SKIM
Tool will display current VIN stored in Skim.
VEHICLE SELECTION
ECU IDENTIFICATION
BMW
CADILLAC
> CHRYSLER
DODGE
FORD
SKIM READ VPW
PRESS ENTER KEY
VEHICLE SELECTION
IMMOBILISER
REMOTE
> SKIM READING
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
VEHICLE SELECTION
> SKIM
SKIM
SKIM
SKIM
READ
READ
READ
READ
VPW
CAN 2/3
1/4/5
FOBIK
SWITCH IGNITION ON
PRESS ENTER KEY
Make sure you have a
transponder key in the ignition and turned all the way
on to the “Run” position.
Then press “Enter”
DIAGNOSTIC MENU
PIN FUNCTIONS
> VIN NUMBER
MATCHING FUNCTIONS
ANTI THEFT LOCKOUT
VIRGINIZE SKIM
STORED SKIM VIN
STORED SKIM VIN
1B3XL46W05N662271
yyyyyyyyyyyyyyyyyy
(Programmed SKIM)
(Un-programmed SKIM)
PRESS ENTER KEY
PRESS ENTER KEY
This feature is useful to determine whether
the SKIM is programmed to a vehicle or
whether it is New or has been “Virginized”.
The VIN will not display if the the SKIM is not
programmed to vehicle.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
125
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
CHRY ADS-157 SKIM FUNCTIONS
‘Type 2’ - Change PIN
Warning: Changing a PIN to one that doesn’t match Chrysler’s data file might
result in a car being “Unlockable” by anyone that doesn’t have PIN Reading software.
VEHICLE SELECTION
BMW
CADILLAC
> CHRYSLER
DODGE
FORD
ECU IDENTIFICATION
SKIM READ VPW
PRESS ENTER KEY
VEHICLE SELECTION
IMMOBILISER
REMOTE
> SKIM READING
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
SECURITY CODE
____
You must know the existing
PIN to the vehicle.
NEW PIN
____
VEHICLE SELECTION
> SKIM
SKIM
SKIM
SKIM
READ
READ
READ
READ
VPW
CAN 2/3
1/4/5
FOBIK
DIAGNOSTIC MENU
> PIN FUNCTIONS
VIN NUMBER
MATCHING FUNCTIONS
ANTI THEFT LOCKOUT
VIRGINIZE SKIM
Enter your new PIN.
CHANGE PIN
SUCCESS
PIN FUNCTIONS
SWITCH IGNITION ON
READ PINCODE
> CHANGE PIN CODE
PRESS ENTER KEY
PRESS ENTER KEY
126
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
CHRY ADS-157 PIN READ
CAN Systems (1 thru 5)
ECU IDENTIFICATION
Cut the correct transponder
key for the vehicle & insert
it into the ignition and turn it
all the way on to the “Run”
position.
VEHICLE SELECTION
VEHICLE SELECTION
IMMOBILISER
REMOTE
> SKIM READING
VEHICLE SELECTION
READ
READ
READ
READ
PRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
BMW
CADILLAC
> CHRYSLER
DODGE
FORD
SKIM
SKIM
SKIM
SKIM
WCM SKIM READ
VPW
CAN 2/3
1/4/5
FOBIK
DIAGNOSTIC MENU
> READ PINCODE
READ PINCODE
PLEASE WAIT
. . . . .
(select the system)
READ PINCODE
SWITCH IGNITION ON
PINCODE: 5649
(this is an example)
PRESS ENTER KEY
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
127
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
Chrysler Remote Section
GRID INDEX
- Only the models listed are supported -
Remote
System
Type
Adaptor
Type
Part Number
MODELS
YEARS
300M
1999 - 2000
6
2
P/N: 04602268AC
2001 - 2004
6
2
P/N: 04602260AA
Cirrus
1998 - 2000
10
1
P/N: 04608229AB
Concorde
1998 - 2000
6
2
P/N: 04602268AC
2001 - 2004
6
2
P/N: 04602260AA
1999 - 2000
6
2
P/N: 04602268AC
2001
6
2
P/N: 04602260AA
PT Cruiser
2001 - 2005
1
2
P/N: 04671641AE
Sebring Convertible
1998 - 2000
4
1
P/N: 04671226
2001 - 2006
6
2
P/N: 04602260AA
Sebring 4 Door
2001 - 2006
6
2
P/N: 04602260AA
Town & Country
1996 - 1998
9
1
P/N: 04686366
1999 - 2000
9
1
P/N: 04686481
3
2
P/N: 04686481
w/o Pwr Doors
3
2
P/N: 04686797AB
with Pwr Doors
LHS
2001 - 2003
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory
Remote Keyless Entry. If it did not come from the factory with working factory remotes than you
cannot add them in now.
128
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
MVP &
TCODE
Dodge Remote Section
GRID INDEX
- Only the models listed are supported -
Remote
System
Type
Adaptor
Type
Part Number
1996 - 1998
9
1
P/N: 04686366
1999 - 2000
9
1
P/N: 04686481
3
2
P/N: 04686481
w/o Pwr Doors
3
2
P/N: 04686797AB
with Pwr Doors
1998
5
1
P/N: 04686366
1999 - 2000
5
1
P/N: 56045497
2001 - 2004
7
2
P/N: 04686481
1998
5
1
P/N: 56007049
1999 - 2000
5
1
P/N: 56045497
2001 - 2003
7
2
P/N: 04686481
1999 - 2000
6
2
P/N: 04602268AC
2001 - 2004
6
2
P/N: 04602260AA
Neon
2001 - 2006
1
2
P/N: 04759008
RAM Pick Up
1998
5
1
P/N: 04686366
1999 - 2001
5
1
P/N: 56045497
2002
5
1
P/N: 56045497
2002
8
2
P/N: 04686481
2003 - 2005
8
2
P/N: 04686481
1998 - 2000
10
1
P/N: 04608229AB
2001 - 2006
6
2
P/N: 04602260AA
MODELS
YEARS
Caravan
2001 - 2003
Dakota
Durango
Intrepid
Stratus 4 Door
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
129
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
Jeep Remote Section
GRID INDEX
- Only the models listed are supported -
Remote
System
Type
Adaptor
Type
Part Number
MODELS
YEARS
Cherokee
1998
11
1
P/N: 56008968AB
1999 - 2001
11
1
Black P/N: 56036859
Grey P/N: 56036860
Grand Cherokee
1999 - 2004
2
2
Black P/N: 56036859
Grey P/N: 56036860
Liberty
2002 - 2004
3
2
P/N: 04602260AA
Plymouth Remote Section
130
Remote
System
Type
Adaptor
Type
Part Number
MODELS
YEARS
Breeze
1998 - 2000
10
1
P/N: 04608229AB
Neon
2000 - 2001
1
2
P/N: 04759008
Voyager
1996 - 1998
9
1
P/N: 04686366
1999 - 2000
9
1
P/N: 04686481
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
Type 1 Remotes
M V Ppowered
&
by
TCODE
(Neon & PT Cruiser)
-- Any Remotes not present will be erased during programming mode. -VEHICLE SELECTION
DIAGNOSTIC MENU
ECU IDENTIFICATION
LIVE DATA
> SPECIAL FUNCTIONS
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
PR
ESS TWICE
VEHICLE SELECTION
DIAGNOSTIC MENU
IMMOBILISER
> REMOTE
> PROGRAM REMOTE
TEST REMOTE
VEHICLE SELECTION
2000-2006
NEON
PROGRAMMING REMOTES
> TYPE 1
TYPE 2
TYPE 3
TYPE 4
TYPE 5
TYPE 6
SWITCH IGNITION ON
PRESS ENTER KEY
ECU IDENTIFICATION
PRESS REMOTES
BACK’ TO EXIT.
Note:
1) A chime is heard as you enter & leave
programming mode.
•
•
A chime is heard as a remote is learned.
•
Press the BACK key to exit the mode.
All Remotes must be programmed at the
same time.
NEON / PT CRUISER
REMOTES - TYPE 1
PROGRAMMING REMOTES
PROCEDURE COMPLETE
PRESS ENTER KEY
2001-2005
PT CRUISER
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
PRESS ENTER KEY
131
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
Type 1 Remotes
M V Ppowered
&
by
TCODE
(Neon & PT Cruiser)
Type 1 LIVE DATA
DIAGNOSTIC MENU
ECU IDENTIFICATION
> LIVE DATA
SPECIAL FUNCTIONS
LIVE DATA
DRV.DOOR.UN. CLOSED
DRV.DO.SW.
CLOSED
REMOTE BUTTO IDLE
DRV.DOOR.LK. CLOSED
DRV.DOOR.UN. CLOSED
DR.KE.CYL.SW IDLE
Live Data can be used to ascertain if there are
open or closed circuits and/or relay problems.
LIVE DATA:
Driver’s Door Unlock - Open or Closed Circuit
Driver’s Door Switch - Open or Closed Circuit
Remote Buttons - Idle (not being used this second)
Driver’s Door Lock - Open or Closed Circuit
Driver’s Door Unlock Relay - Open or Closed Circuit
Driver’s Key Cylinder Switch - Idle
(not being used this second)
Testing Remotes - to determine if a Remote is
working properly on a Type 1 system.
DIAGNOSTIC MENU
PROGRAM REMOTE
> TEST REMOTE
TESTING REMOTES
TESTING REMOTES
PRESS REMOTES
PROCEDURE COMPLETE
BACK’ TO EXIT.
PRESS ENTER KEY
A chime is heard as a button on the Remote is pressed.
Unlock
Lock
132
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 2 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘99-’04 Jeep Grand Cherokee)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
VEHICLE SELECTION
TYPE 1
> TYPE 2
TYPE 3
TYPE 4
TYPE 5
TYPE 6
SWITCH IGNITION ON
PRESS ENTER KEY
ECU IDENTIFICATION
1999-2004
Jeep
Grand Cherokee
JEEP GRAND CHEROKEE
REMOTES - TYPE 2
PROGRAM REMOTE
ENTER REMOTE NO. # ....
Note:
There are 4 memory positions for the
Type 2 Remote system: 1, 2, 3 & 4
Enter a number to fill a memory position for
the remote you would like to program.
This will overwrite the memory location if
there was already a remote programmed to
that position before.
You can program the same remote into all
4 positions to erase other remotes if you
want to.
PRESS ENTER KEY
VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
IMMOBILISER
> REMOTE
PROGRAM REMOTE
DIAGNOSTIC MENU
PRESS & RELEAS. REMOTE
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
Note: To program the remoteDIAGNOSTIC MENU
Press the Lock & Unlock buttons together
and then quickly press the unlock button.
> PROGRAM REMOTE
PROGRAM REMOTE
PROCEDURE COMPLETE
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
133
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 3 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘01-’03 Dodge Caravan)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
-- Any Remotes not present will be erased during programming mode. -VEHICLE SELECTION
DIAGNOSTIC MENU
VEHICLE SELECTION
with Power Sliding Doors
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
DIAGNOSTIC MENU
IMMOBILISER
> REMOTE
> PROGRAM REMOTE
VEHICLE SELECTION
PROGRAMMING REMOTES
TYPE 1
TYPE 2
> TYPE 3
TYPE 4
TYPE 5
TYPE 6
PRESS LOCK & UNLOCK
TOGETHER FOR 1 Sec.
WITHIN 3 Secs. Press
EITHER KEY FOR 1 Sec
REPEAT FOR ALL FOBS
BACK’ TO EXIT.
2001-2003
Caravan
SWITCH IGNITION ON
PRESS ENTER KEY
ECU IDENTIFICATION
CARAVAN / LIBERTY
REMOTES - TYPE 3
PRESS ENTER KEY
1) Press the Lock & Unlock buttons together
and then quickly press the unlock button.
•
•
A chime is heard as a remote is learned.
•
Press the BACK key to exit the mode.
All Remotes must be programmed at the
same time.
PROGRAMMING REMOTES
PROCEDURE COMPLETE
PRESS ENTER KEY
134
No Power Sliding Doors
Note: To program the remote-
2001-2003
Caravan
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
Type 3 Remotes
M V Ppowered
&
by
TCODE
(‘02-’04 Jeep Liberty)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
-- Any Remotes not present will be erased during programming mode. -DIAGNOSTIC MENU
VEHICLE SELECTION
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
DIAGNOSTIC MENU
IMMOBILISER
> REMOTE
> PROGRAM REMOTE
PROGRAMMING REMOTES
VEHICLE SELECTION
2002-2004
Jeep Liberty
PRESS LOCK & UNLOCK
TOGETHER FOR 1 Sec.
WITHIN 3 Secs. Press
EITHER KEY FOR 1 Sec
REPEAT FOR ALL FOBS
BACK’ TO EXIT.
TYPE 1
TYPE 2
> TYPE 3
TYPE 4
TYPE 5
TYPE 6
Note: To program the remoteSWITCH IGNITION ON
PRESS ENTER KEY
ECU IDENTIFICATION
1) Press the Lock & Unlock buttons together
and then quickly press the unlock button.
•
•
A chime is heard as a remote is learned.
•
Press the BACK key to exit the mode.
All Remotes must be programmed at the
same time.
CARAVAN / LIBERTY
REMOTES - TYPE 3
PRESS ENTER KEY
PROGRAMMING REMOTES
PROCEDURE COMPLETE
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
135
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 4 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘98-’00 Chrysler Sebring Conv.)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
IMMOBILISER
> REMOTE
VEHICLE SELECTION
TYPE 1
TYPE 2
TYPE 3
> TYPE 4
TYPE 5
TYPE 6
Note:
1) Leave driver’s door open.
2) Lock the car using the
power door lock button on
driver’s door.
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
> PROGRAM REMOTE
PROGRAM REMOTE
SWITCH IGNITION ON
PRESS ENTER KEY
1998-2000
Chrysler Sebring
Convertible
DIAGNOSTIC MENU
DO YOU WANT TO
ERASE REMOTES
‘1’ -YES
‘3’ -NO
ECU IDENTIFICATION
PROGRAM REMOTE
SEBRING CONVERTIBLE
REMOTES - TYPE 4
HOLD LOCK BUTTON &
DECKLID BUTTON
TOGETHER FOR 10 Sec.
Note: To program the remote
1) Press the Lock button & Decklid button
together and hold until the door locks
cycle to the unlocked position. This takes
about 10 to 20 seconds.
•
If the locks fail to cycle after 20 seconds, unplug your Device and start over.
This is not uncommon for this system.
•
Each remote must be programmed
separately. You must unplug your
Device and start over to program
another remote.
PRESS ENTER KEY
136
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 5 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(1998 Dodge Durango)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
PROGRAM REMOTE
SWITCH IGNITION ON
PRESS REMOTE
PRESS ENTER KEY
PRESS ENTER KEY
ECU IDENTIFICATION
DAKOTA / DURANGO / RAM
CCD REMOTES - TYPE 5
Note: Type 5 Remotes 1) Press the Lock & Unlock buttons
together and then quickly press the unlock
button.
•
PRESS ENTER KEY
The door locks cycle when a remote is
learned.
DIAGNOSTIC MENU
1998
Dodge Durango
PROGRAM REMOTE
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
PROCEDURE COMPLETE
PRESS ENTER KEY
DIAGNOSTIC MENU
VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
IMMOBILISER
> REMOTE
VEHICLE SELECTION
TYPE 1
TYPE 2
TYPE 3
TYPE 4
> TYPE 5
TYPE 6
> PROGRAM REMOTE
ERASE REMOTES
PROGRAM REMOTE
REMOTE 1: 09A0A3E6
REMOTE 2: 0836A57T
REMOTE 3: FFFFFFFF
REMOTE 4: FFFFFFFF
PROGRAM REMOTE
REMOTE 1: 09A0A3E6
REMOTE 2: FFFFFFFF
REMOTE 3: FFFFFFFF
REMOTE 4: FFFFFFFF
PRESS ENTER KEY
Note: Type 5 Remotes When you enter programming
mode, a list of the current 4
memory positions is displayed.
A position that contains all “F”
letters is an unused or empty
position.
PRESS ENTER KEY
Note: Type 5 Remotes The memory positions are displayed again
after programming the remote. The next
memory position is now filled with the last
remote just programmed.
To program more remotes, repeat the
above method. If all the memory positions
are filled, you must erase them all. That
will clear all the memory positions.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
137
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 5 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘99-’00 Dodge Durango)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
VEHICLE SELECTION
DIAGNOSTIC MENU
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
> PROGRAM REMOTE
ERASE REMOTES
PROGRAM REMOTE
REMOTE 1: 09A0A3E6
REMOTE 2: FFFFFFFF
REMOTE 3: FFFFFFFF
REMOTE 4: FFFFFFFF
VEHICLE SELECTION
IMMOBILISER
> REMOTE
PRESS ENTER KEY
VEHICLE SELECTION
Note: Type 5 Remotes When you enter programming
mode, a list of the current 4
memory positions is displayed.
A position that contains all “F”
letters is an unused or empty
position.
TYPE 1
TYPE 2
TYPE 3
TYPE 4
> TYPE 5
TYPE 6
PROGRAM REMOTE
REMOTE 1: 09A0A3E6
REMOTE 2: 0836A57T
REMOTE 3: FFFFFFFF
REMOTE 4: FFFFFFFF
PRESS ENTER KEY
Note: Type 5 Remotes The memory positions are displayed again
after programming the remote. The next
memory position is now filled with the last
remote just programmed.
To program more remotes, repeat the
above method. If all the memory positions
are filled, you must erase them all. That
will clear all the memory positions.
PROGRAM REMOTE
SWITCH IGNITION ON
PRESS REMOTE
PRESS ENTER KEY
ECU IDENTIFICATION
DAKOTA / DURANGO / RAM
CCD REMOTES - TYPE 5
PRESS ENTER KEY
DIAGNOSTIC MENU
PRESS ENTER KEY
Note: Type 5 Remotes 1) Press the Lock & Unlock buttons
together and then quickly press the unlock
button.
•
The door locks cycle when a remote is
learned.
PROGRAM REMOTE
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
PROCEDURE COMPLETE
‘99-’00
Dodge Durango
PRESS ENTER KEY
138
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
Type 5 Remotes
M V Ppowered
&
by
TCODE
(1998 Dodge Dakota)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
PROGRAM REMOTE
SWITCH IGNITION ON
PRESS REMOTE
PRESS ENTER KEY
PRESS ENTER KEY
ECU IDENTIFICATION
DAKOTA / DURANGO / RAM
CCD REMOTES - TYPE 5
Note: Type 5 Remotes 1) Press the Lock & Unlock buttons
together and then quickly press the unlock
button.
•
PRESS ENTER KEY
The door locks cycle when a remote is
learned.
DIAGNOSTIC MENU
1998
Dodge Dakota
PROGRAM REMOTE
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
PROCEDURE COMPLETE
PRESS ENTER KEY
DIAGNOSTIC MENU
VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
IMMOBILISER
> REMOTE
VEHICLE SELECTION
TYPE 1
TYPE 2
TYPE 3
TYPE 4
> TYPE 5
TYPE 6
> PROGRAM REMOTE
ERASE REMOTES
PROGRAM REMOTE
REMOTE 1: 09A0A3E6
REMOTE 2: 0836A57T
REMOTE 3: FFFFFFFF
REMOTE 4: FFFFFFFF
PROGRAM REMOTE
REMOTE 1: 09A0A3E6
REMOTE 2: FFFFFFFF
REMOTE 3: FFFFFFFF
REMOTE 4: FFFFFFFF
PRESS ENTER KEY
Note: Type 5 Remotes When you enter programming
mode, a list of the current 4
memory positions is displayed.
A position that contains all “F”
letters is an unused or empty
position.
PRESS ENTER KEY
Note: Type 5 Remotes The memory positions are displayed again
after programming the remote. The next
memory position is now filled with the last
remote just programmed.
To program more remotes, repeat the
above method. If all the memory positions
are filled, you must erase them all. That
will clear all the memory positions.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
139
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 5 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘99-’00 Dodge Dakota)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
VEHICLE SELECTION
DIAGNOSTIC MENU
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
> PROGRAM REMOTE
ERASE REMOTES
PROGRAM REMOTE
REMOTE 1: 09A0A3E6
REMOTE 2: FFFFFFFF
REMOTE 3: FFFFFFFF
REMOTE 4: FFFFFFFF
VEHICLE SELECTION
IMMOBILISER
> REMOTE
PRESS ENTER KEY
VEHICLE SELECTION
Note: Type 5 Remotes When you enter programming
mode, a list of the current 4
memory positions is displayed.
A position that contains all “F”
letters is an unused or empty
position.
TYPE 1
TYPE 2
TYPE 3
TYPE 4
> TYPE 5
TYPE 6
PROGRAM REMOTE
REMOTE 1: 09A0A3E6
REMOTE 2: 0836A57T
REMOTE 3: FFFFFFFF
REMOTE 4: FFFFFFFF
PRESS ENTER KEY
Note: Type 5 Remotes The memory positions are displayed again
after programming the remote. The next
memory position is now filled with the last
remote just programmed.
To program more remotes, repeat the
above method. If all the memory positions
are filled, you must erase them all. That
will clear all the memory positions.
PROGRAM REMOTE
SWITCH IGNITION ON
PRESS REMOTE
PRESS ENTER KEY
ECU IDENTIFICATION
DAKOTA / DURANGO / RAM
CCD REMOTES - TYPE 5
PRESS ENTER KEY
DIAGNOSTIC MENU
PRESS ENTER KEY
Note: Type 5 Remotes 1) Press the Lock & Unlock buttons
together and then quickly press the unlock
button.
•
The door locks cycle when a remote is
learned.
PROGRAM REMOTE
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
PROCEDURE COMPLETE
‘99-’00
Dodge Dakota
PRESS ENTER KEY
140
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
1998-2005 DODGE RAM PICK UP
In 2002, Dodge had 2 different styles of RAM Pick-Ups. The new style
which has door handles that stick out from the door use Remote Type 8.
The older style RAM Pick-Ups that have door handles that are flush with
the door use use Remote Type 5.
New Style RAM Pick-Up
Mid 2002 - 2005
Type 8 Remotes
The door handle sticks out
from the door.
Old Style RAM Pick-Up
1998 to Mid 2002
Type 5 Remotes
The door handle is flush in
the door.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
141
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 5 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘98-’02 Dodge RAM Pick Up)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
VEHICLE SELECTION
DIAGNOSTIC MENU
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
PROGRAM REMOTE
> PROGRAM REMOTE
ERASE REMOTES
REMOTE 1: 09A0A3E6
REMOTE 2: 0836A57T
REMOTE 3: FFFFFFFF
REMOTE 4: FFFFFFFF
PROGRAM REMOTE
REMOTE 1: 09A0A3E6
REMOTE 2: FFFFFFFF
REMOTE 3: FFFFFFFF
REMOTE 4: FFFFFFFF
VEHICLE SELECTION
IMMOBILISER
> REMOTE
PRESS ENTER KEY
VEHICLE SELECTION
Note: Type 5 Remotes When you enter programming
mode, a list of the current 4
memory positions is displayed.
A position that contains all “F”
letters is an unused or empty
position.
TYPE 1
TYPE 2
TYPE 3
TYPE 4
> TYPE 5
TYPE 6
PRESS ENTER KEY
Note: Type 5 Remotes The memory positions are displayed again
after programming the remote. The next
memory position is now filled with the last
remote just programmed.
To program more remotes, repeat the
above method. If all the memory positions
are filled, you must erase them all. That
will clear all the memory positions.
PROGRAM REMOTE
SWITCH IGNITION ON
PRESS REMOTE
PRESS ENTER KEY
ECU IDENTIFICATION
DAKOTA / DURANGO / RAM
CCD REMOTES - TYPE 5
PRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
PRESS ENTER KEY
Note: Type 5 Remotes 1) Press the Lock & Unlock buttons
together and then quickly press the unlock
button.
•
A chime is heard as a remote is learned.
PROGRAM REMOTE
PROCEDURE COMPLETE
PRESS ENTER KEY
142
‘99-’00
Dodge Dakota
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
Type 6 Remotes
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
-- Any Remotes not present will be erased during programming mode. -DIAGNOSTIC MENU
VEHICLE SELECTION
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
DIAGNOSTIC MENU
VEHICLE SELECTION
> PROGRAM REMOTE
IMMOBILISER
> REMOTE
PROGRAMMING REMOTES
PRESS LOCK & UNLOCK
TOGETHER FOR 1 Sec.
WITHIN 3 Secs. Press
EITHER KEY FOR 1 Sec
REPEAT FOR ALL FOBS
BACK’ TO EXIT.
VEHICLE SELECTION
1999-2004
Chrysler 300M
1998-2004
Chrysler Concorde
TYPE 1
TYPE 2
TYPE 3
TYPE 4
TYPE 5
> TYPE 6
1999-2001
Chrysler LHS
2001-2006
Chrysler Sebring
Convertible
2001-2006
Chrysler Sebring
4 Door
1999-2004
Dodge Intrepid
2001-2006
Dodge Stratus
4 Door
Note: To program the remote1) Press the Lock & Unlock buttons together
and then quickly press the unlock button.
SWITCH IGNITION ON
PRESS ENTER KEY
ECU IDENTIFICATION
300M / CONCORDE
INTREPID / LHS
REMOTES - TYPE 6
•
A chime is heard as you enter & leave
programming mode.
•
•
A chime is heard as a remote is learned.
•
Press the BACK key to exit the mode.
All Remotes must be programmed at the
same time.
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
PROGRAMMING REMOTES
PROCEDURE COMPLETE
PRESS ENTER KEY
143
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 7 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘01-’04 Dodge Dakota)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
IMMOBILISER
> REMOTE
VEHICLE SELECTION
TYPE 4
TYPE 5
TYPE 6
> TYPE 7
TYPE 8
TYPE 9
DIAGNOSTIC MENU
> PROGRAM REMOTE
PROGRAM REMOTE
ENTER REMOTE NO. # ....
Note:
There are 3 memory positions for the
Type 7 Remote system: 1, 2, & 3
Enter a number to fill a memory position for the
remote you would like to program.
This will overwrite the memory location if there
was already a remote programmed to that position before.
SWITCH IGNITION ON
2001-2004
Dodge Dakota
You can program the same remote into all 4
positions to erase other remotes if you want to.
PRESS ENTER KEY
Note: To program the remoteECU IDENTIFICATION
DAKOTA PICK-UP
REMOTES - TYPE 7
Press the Lock & Unlock buttons together. Now
press the Lock button once.
You must act quickly!!
When done press Enter on Device.
PRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
PROGRAM REMOTE
PRESS LOCK & UNLOCK
TOGETHER FOR 1 Sec.
WITHIN 3 Secs. Press
EITHER KEY FOR 1 Sec
PROGRAM REMOTE
PROCEDURE COMPLETE
PRESS ENTER KEY
144
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 7 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘01-’03 Dodge Durango)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
PROGRAM REMOTE
VEHICLE SELECTION
TYPE 4
TYPE 5
TYPE 6
> TYPE 7
TYPE 8
TYPE 9
SWITCH IGNITION ON
PRESS ENTER KEY
ECU IDENTIFICATION
2001-2003
Dodge Durango
ENTER REMOTE NO. # ....
Note: There are 3 memory positions for the
Type 7 Remote system: 1, 2, & 3
Enter a number to fill a memory position for
the remote you would like to program.
This will overwrite the memory location if
there was already a remote programmed to
that position before.
You can program the same remote into all
4 positions to erase other remotes if you
want to.
DAKOTA PICK-UP
REMOTES - TYPE 7
PROGRAM REMOTE
PRESS LOCK & UNLOCK
TOGETHER FOR 1 Sec.
WITHIN 3 Secs. Press
EITHER KEY FOR 1 Sec
PRESS ENTER KEY
VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
Press the Lock & Unlock buttons together. Now
press the Lock button once.
You must act quickly!!
When done press Enter on Device.
VEHICLE SELECTION
IMMOBILISER
> REMOTE
Note: To program the remote-
DIAGNOSTIC MENU
> PROGRAM REMOTE
PROGRAM REMOTE
PROCEDURE COMPLETE
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
145
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 8 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘02-’05 Dodge RAM Pick Up)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
-- Any Remotes not present will be erased during programming mode. -VEHICLE SELECTION
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
DIAGNOSTIC MENU
IMMOBILISER
> REMOTE
> PROGRAM REMOTE
VEHICLE SELECTION
PROGRAMMING REMOTES
TYPE 6
TYPE 7
> TYPE 8
TYPE 9
TYPE 10
TYPE 11
PRESS LOCK & UNLOCK
TOGETHER FOR 1 Sec.
WITHIN 3 Secs. Press
EITHER KEY FOR 1 Sec
REPEAT FOR ALL FOBS
BACK’ TO EXIT.
2002-2005
Dodge
RAM Pick-Up
Note: To program the remoteSWITCH IGNITION ON
PRESS ENTER KEY
ECU IDENTIFICATION
RAM PICK-UP
REMOTES - TYPE 8
1) Press the Lock & Unlock buttons together
and then quickly press the Unlock button.
•
•
A chime is heard as a remote is learned.
•
Press the BACK key to exit the mode.
All Remotes must be programmed at the
same time.
PROGRAMMING REMOTES
PRESS ENTER KEY
PROCEDURE COMPLETE
PRESS ENTER KEY
146
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 9 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘96-’98 Dodge Caravan)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
-- Any Remotes not present will be erased during programming mode. -VEHICLE SELECTION
PROGRAM REMOTE
TYPE 4
TYPE 5
TYPE 6
TYPE 7
TYPE 8
> TYPE 9
WARNING
ALL REMOTES WILL
BE ERASED
PRESS ENTER KEY
PROGRAMMING REMOTES
PRESS LOCK & UNLOCK
TOGETHER FOR 1 Sec.
WITHIN 3 Secs. Press
EITHER KEY FOR 1 Sec
REPEAT FOR ALL FOBS
BACK’ TO EXIT.
SWITCH IGNITION ON
1996-1998
Chrysler
Town & Country
PRESS ENTER KEY
ECU IDENTIFICATION
Note: To program the remote-
1996-1998
Dodge Caravan
CARAVAN
CCD REMOTES - TYPE 9
1996-1998
Plymouth Voyager
PRESS ENTER KEY
2) Press the Lock & Unlock buttons together
and then quickly press the unlock button.
VEHICLE SELECTION
DIAGNOSTIC MENU
•
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
IMMOBILISER
> REMOTE
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
1) Wait for chime - 2 to 3 seconds - to start
programming remotes.
A chime is heard as you enter & leave
programming mode.
•
•
A chime is heard as a remote is learned.
•
Press the BACK key to exit the mode.
All Remotes must be programmed at the
same time.
DIAGNOSTIC MENU
> PROGRAM REMOTE
PROGRAM REMOTE
PROCEDURE COMPLETE
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
147
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 9 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘99-’00 Dodge Caravan)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
-- Any Remotes not present will be erased during programming mode. -DIAGNOSTIC MENU
VEHICLE SELECTION
> PROGRAM REMOTE
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
PROGRAM REMOTE
VEHICLE SELECTION
WARNING
IMMOBILISER
> REMOTE
ALL REMOTES WILL
BE ERASED
PRESS ENTER KEY
VEHICLE SELECTION
PROGRAMMING REMOTES
TYPE 4
TYPE 5
TYPE 6
TYPE 7
TYPE 8
> TYPE 9
SWITCH IGNITION ON
PRESS ENTER KEY
ECU IDENTIFICATION
CARAVAN
CCD REMOTES - TYPE 9
Note: To program the remote1) Wait for chime - 2 to 3 seconds - to
start programming remotes.
2) Press the Lock & Unlock buttons
together and then quickly press the
unlock button.
•
1999-2000
Chrysler
Town & Country
1999-2000
Dodge Caravan
1999-2000
Plymouth Voyager
A chime is heard as you enter &
leave programming mode.
PROGRAM REMOTE
A chime is heard as a remote is
learned.
PROCEDURE COMPLETE
PRESS ENTER KEY
•
DIAGNOSTIC MENU
•
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
148
PRESS LOCK & UNLOCK
TOGETHER FOR 1 Sec.
WITHIN 3 Secs. Press
EITHER KEY FOR 1 Sec
REPEAT FOR ALL FOBS
BACK’ TO EXIT.
All Remotes must be programmed at
the same time.
•
Press the BACK key to exit the
mode.
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 10 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(‘98-’00 Breeze / Cirrus / Stratus)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
VEHICLE SELECTION
PROGRAM REMOTE
TYPE 6
TYPE 7
TYPE 8
TYPE 9
> TYPE 10
TYPE 11
DO YOU WANT TO
ERASE REMOTES
‘1’ -YES
‘3’ -NO
PROGRAMMING REMOTES
PRESS LOCK & UNLOCK
TOGETHER FOR 1 Sec.
DO THIS TWICE
SWITCH IGNITION ON
1998-2000
Chrysler Cirrus
PRESS ENTER KEY
1998-2000
Dodge Stratus (4Dr)
ECU IDENTIFICATION
1998-2000
Plymouth Breeze
BREEZE/CIRRUS/STRATUS
CCD REMOTES - TYPE 10
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
IMMOBILISER
> REMOTE
Note: To program the remote1) Press Lock & Unlock together for one
second and repeat again.
•
PRESS ENTER KEY
VEHICLE SELECTION
REPEAT FOR ALL FOBS
BACK’ TO EXIT.
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
If you chose to erase remotes; you must
go back and program any existing remotes
you want to operate. Do not erase again.
•
A chime is heard as you enter programming mode.
•
The door locks cycle if a remote has
been learned.
•
Each remote must be programmed
separately.
•
Press the BACK key to exit the mode.
DIAGNOSTIC MENU
> PROGRAM REMOTE
PROGRAM REMOTE
PROCEDURE COMPLETE
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
149
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
Type 11 Remotes
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
(1998 Jeep Cherokee)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
VEHICLE SELECTION
DIAGNOSTIC MENU
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
> PROGRAM REMOTE
PROGRAM REMOTE
VEHICLE SELECTION
ENTER REMOTE NO. # ....
IMMOBILISER
> REMOTE
VEHICLE SELECTION
TYPE 6
TYPE 7
TYPE 8
TYPE 9
TYPE 10
> TYPE 11
SWITCH IGNITION ON
Note:
There are 4 memory positions for the
Type 11 Remote system: 1, 2, 3 & 4
Enter a number to fill a memory position for
the remote you would like to program.
1998
Jeep Cherokee
This will overwrite the memory location if
there was already a remote programmed to
that position before.
You can program the same remote into all
4 positions to erase other remotes if you
want to.
PRESS ENTER KEY
PROGRAMMING REMOTES
ECU IDENTIFICATION
PRESS UNLOCK BUTTON
JEEP CHEROKEE
CCD REMOTES - TYPE 11
Note: To program the remotePRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
•
•
Press the Unlock button.
The programming window is very short,
you must hurry.
•
The door locks cycle after the remote is
learned.
DIAGNOSTIC MENU
> PROGRAM REMOTE
•
The Device will return to the ‘Program
Remote’ menu.
150
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Mpowered
V P & ADVANCED
CHRYDIAGNOSTICS
- DODGE - JEEP
USA
by
TCODE
CHRY - DODGE
- JEEP USA
ADVANCED
DIAGNOSTICS
M V Ppowered
&
by
TCODE
Type 11 Remotes
(1999-2001 Jeep Cherokee)
NOTE: Not all Chrysler-Dodge-Jeep-Plymouth vehicles came from the factory with factory Remote Keyless Entry. If it did not come from the factory with working factory remotes than you cannot add them in now.
VEHICLE SELECTION
TYPE 6
TYPE 7
TYPE 8
TYPE 9
TYPE 10
> TYPE 11
Note:
There are 4 memory positions for the
Type 11 Remote system: 1, 2, 3 & 4
Enter a number to fill a memory position for
the remote you would like to program.
This will overwrite the memory location if
there was already a remote programmed to
that position before.
SWITCH IGNITION ON
PRESS ENTER KEY
1999-2001
Jeep Cherokee
You can program the same remote into all
4 positions to erase other remotes if you
want to.
ECU IDENTIFICATION
PROGRAMMING REMOTES
JEEP CHEROKEE
CCD REMOTES - TYPE 11
PRESS UNLOCK BUTTON
PRESS ENTER KEY
VEHICLE SELECTION
ACURA
CADILLAC
> CHRYSLER
DODGE
FORD USA
VEHICLE SELECTION
IMMOBILISER
> REMOTE
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
Note: To program the remote-
•
•
Press the Unlock button.
The programming window is very short,
you must hurry.
•
The door locks cycle after the remote is
learned.
DIAGNOSTIC MENU
> PROGRAM REMOTE
•
The Device will return to the ‘Program
Remote’ menu.
DIAGNOSTIC MENU
PROGRAM REMOTE
> PROGRAM REMOTE
ENTER REMOTE NO. # ....
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
151
MVP & TCODE
Powered by ADVANCED DIAGNOSTICS USA
Chrysler
PROXIMITY
ADS-178
Requires previous purchase of ADS160 & ADS173
152
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
CHRYSLER PROX KEYLESS GO
Chrysler / Dodge “Keyless GO” proximity systems was first introduced on the 2009 Dodge
Challenger as optional upgrades. Now expanded to 2011-13 Dodge Durango & Jeep Grand
Cherokee.
The vehicle is shipped with the “Push to Start” button removed and the Fobik remote’s are
used in the Fobik ignition to Start and Stop the engine. After the vehicle arrives at the dealership and is taken out “transport” mode - the “Push to Start” button is placed into the front of
the Fobik ignition.
When the proximity Fobik remote is recognized inside the vehicle - the driver can press on the
brake pedal and press the “Start” button to start and stop the engine.
Replacement Fobik proximity remote’s are programmed like other Fobik remote’s by inserting
them into the Fobik ignition switch.
On the Keyless Go removable push button systems described above anytime any programming procedures are performed on the FOBIK keys there is a matching function called
“MATCH KEYLESS GO” on the menu that must be performed as a last step.
This function enables the PUSH TO START button to work. Without performing this function
the FOBIK keys will only function by inserting the keys in the ignition with the button removed.
The matching is always performed last and after any keys are added or deleted. Once this
function is completed the Fobik keys will operate as PROXIMITY keys allowing the vehicle to
start with the “Start” push button installed.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
153
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
PIN READ for FOBIK ‘KEYLESS GO’
Use this method to get the PIN
VEHICLE SELECTION
+ AUDI
+ LANDROVER
+ BMW
+ LEXUS
+ CADILLAC
+ MAZDA
+ CHEVROLET
+ MERCEDES
+ CHRYSLER
+ MITSUBISHI
+ DAEWOO USA
+ NISSAN
+ DODGE
+ PONTIAC
+ FORD
+ ROVER
+ GM (USA)
+ SAAB
+ HONDA/ACURA
+ SATURN
+ HYUNDAI
+ SUBARU
+ INFINITI
+ TOYOTA
+ ISUZU
+ V.W. /AUDI GROUP
+ JAGUAR
+ VOLKSWAGEN
+ JEEP
VERSION
+ KIA
p
?
t
q
ECU IDENTIFICATION
?
q
u
VEHICLE SELECTION
?
p
VIN: 1D3HV18P79S803764
Part No.: 05026364AK
S/W Ver.: 10.30.02
COUNTRY CODE: 2-USA
PRESS ENTER KEY
SKIM READ VPW
SKIM READ CAN 2/3
SKIM READ CAN 1/4/5
SKIM READ FOBIK
t
SWITCH IGNITION ON
PRESS ENTER KEY
+ IMMOBILISER
+ REMOTE
+ SKIM READING
p
Use your
Smart Card for the
Security Access.
u
VEHICLE SELECTION
t
Code for “Keyless GO”
DIAGNOSTIC MENU
q
u
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
VEHICLE SELECTION
ORIGINAL
TYPE A
TYPE B
154
p
?
t
PRESS ENTER KEY
q
u
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
CHRYSLER FOBIK ‘KEYLESS GO’
continued . . .
DIAGNOSTIC MENU
Now that you have the PIN Code you can
program the Fobik remote(s). Stay
connected and hit Enter and then use the
Back button to get you back to the main
menu to select Chrysler aImmobiliser.
> READ PINCODE
READ PINCODE
PINCODE: 4477
PRESS ENTER KEY
Use this method to ERASE
for “Keyless GO” Systems
SECURITY CODE
DIAGNOSTIC MENU
4477
PROGRAM KEYS
> ERASE KEYS
KEYS PROGRAMMED
(this is just an example)
X
4
SECURITY CODE
KEYS PROGRAMMED
____
KEYS PROGRAMMED: 0
1
6
2
7
3
8
4
9
Enter the PIN to the vehicle above.
5
0
(All keys have been erased now go to “Program Keys”)
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
155
MVP &
TCODE
CHRY - DODGE - JEEP
powered
by
ADVANCED DIAGNOSTICS USA
ADD FOBIK for ‘KEYLESS GO’
Use this method to ADD
VEHICLE SELECTION
+ AUDI
+ LANDROVER
+ BMW
+ LEXUS
+ CADILLAC
+ MAZDA
+ CHEVROLET
+ MERCEDES
+ CHRYSLER
+ MITSUBISHI
+ DAEWOO USA
+ NISSAN
+ DODGE
+ PONTIAC
p
?
t
q
for “Keyless GO” Systems
ECU IDENTIFICATION
VIN: 1D3HV18P79S803764
Part No.: 05026364AK
S/W Ver.: 10.30.02
COUNTRY CODE: 2-USA
u
PRESS ENTER KEY
VEHICLE SELECTION
DIAGNOSTIC MENU
+ IMMOBILISER
+ REMOTE
+ SKIM READING
p
?
t
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
q
PRESS ENTER KEY
u
VEHICLE SELECTION
DIAGNOSTIC MENU
+ FOBIK CAN
PACIFICA
SEBRING 2DR HTP
TYPE 1
TYPE 2
p
?
t
> PROGRAM KEYS
ERASE KEYS
KEYS PROGRAMMED
q
SECURITY CODE
u
____
VEHICLE SELECTION
1
6
ORIGINAL
TYPE A
TYPE B
p
?
t
q
u
2
7
3
8
4
9
5
0
Enter the PIN to the vehicle above.
SECURITY CODE
4477
SWITCH IGNITION ON
PRESS ENTER KEY
156
(this is just an example)
X
4
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
continued . . .
KEYS PROGRAMMED
You may be required to enter the PIN
Code again.
KEYS PROGRAMMED: 3
(Now program any additional Fobik’s)
MATCH KEYLESS GO
PRESS ENTER KEY
PROCEDURE COMPLETE
Hit the Back button twice to bring you
back to the main Chrysler menu.
PRESS ENTER KEY
Now to activate the Keyless GO proximity, select Proximity from the Chrysler
Immobilizer menu.
If the wrong PIN code is entered
you will place the vehicle in lock
out mode.
VEHICLE SELECTION
+ FOBIK KEYLESS GO
2011 GEN4 (RFH)
p
?
t
q
SWITCH IGNITION ON
PRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
Thats it! Your done.
u
You must turn the Fobik key on
for at least 1 hour and leave it that
way.
Make sure the battery does not
run down - or you will have to start
over.
Then use the
“PEM LOCKOUT RESET”
under the Keyless GO menu &
then
Re-Try >Match Keyless Go
DIAGNOSTIC MENU
> MATCH KEYLESS GO
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
157
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
CHRYSLER FOBIK GEN 4
Chrysler / Dodge “GEN 4” proximity systems first introduced on the 2011 Chrysler 300,
Dodge Charger & Journey vehicles. This new system is called GEN 4 for being Chrysler’s
generation version 4. A more technical name that is used is “RFH” for Radio Frequency
Hub.
This system is a true proximity system. The Start button cannot be removed as there is
no ignition behind it. The presence of the proximity remote near the front doors will unlock
the vehicle when pulling on the door handle only. No need to press the rubber nubs on the
outside door handles.
The center console area is used for proximity remote learning. There is no learning slot.
When programming you just need to hold the proximity remote fob over the center console
for learning.
158
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
PIN READ for ‘GEN 4’
Use this method to get the PIN
ECU IDENTIFICATION
VEHICLE SELECTION
+ AUDI
+ LANDROVER
+ BMW
+ LEXUS
+ CADILLAC
+ MAZDA
+ CHEVROLET
+ MERCEDES
+ CHRYSLER
+ MITSUBISHI
+ DAEWOO USA
+ NISSAN
+ DODGE
+ PONTIAC
p
?
t
q
VIN: 1D3HV18P79S803764
Part No.: 05026364AK
S/W Ver.: 10.30.02
COUNTRY CODE: 2-USA
u
VEHICLE SELECTION
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
?
p
q
u
SKIM READ VPW
SKIM READ CAN 2/3
SKIM READ CAN 1/4/5
SKIM READ FOBIK
2011 GEN4 RFH
?
p
PRESS ENTER KEY
DIAGNOSTIC MENU
VEHICLE SELECTION
t
PRESS ENTER KEY
DIAGNOSTIC MENU
+ IMMOBILISER
+ REMOTE
+ SKIM READING
t
Code for “GEN 4 RFH”
READ PIN CODE
RESET ECU
q
Use your
Smart Card for the
Security Access.
u
PRESS ENTER KEY
READ PIN CODE: Reads the cars PIN
CODE.
RESET ECU: Clears the time lockout if
the wrong pin has been entered 3 times.
READ PINCODE
HAZARDS ON / IGNITION OFF
PINCODE: 1234
(Just an example)
PRESS ENTER KEY
Turn on the Emergency Flashers.
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
159
MVP &
TCODE
CHRY - DODGE - JEEP
powered
by
ADVANCED DIAGNOSTICS USA
ERASE PROX for ‘GEN 4’
Use this method to ERASE
for “GEN 4” Systems
VEHICLE SELECTION
+ AUDI
+ LANDROVER
+ BMW
+ LEXUS
+ CADILLAC
+ MAZDA
+ CHEVROLET
+ MERCEDES
+ CHRYSLER
+ MITSUBISHI
+ DAEWOO USA
+ NISSAN
+ DODGE
+ PONTIAC
p
?
t
q
HAZARDS ON / IGNITION OFF
PRESS ENTER KEY
u
Turn on the Emergency Flashers.
VEHICLE SELECTION
ECU IDENTIFICATION
+ IMMOBILISER
+ REMOTE
+ SKIM READING
p
?
t
VIN: 1D3HV18P79S803764
Part No.: 05026364AK
q
u
PRESS ENTER KEY
VEHICLE SELECTION
CHRYSLER CAN 3
CHRYSLER CAN 4
CHRYSLER CAN 5
TOWN & COUNTRY VAN
+ PROXIMITY
p
?
t
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODE
> SPECIAL FUNCTIONS
q
u
PRESS ENTER KEY
VEHICLE SELECTION
DIAGNOSTIC MENU
FOBIK KEYLESS GO
2011 GEN4 (RFH)
p
?
t
q
u
PROGRAM PROX
> ERASE PROX
PROX PROGRAMMED
ERASE PROX
Use your
Smart Card for the
Security Access.
ARE YOU SURE
X
160
4
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
continued . . .
SECURITY CODE
You may be required to enter the PIN
Code again.
____
1
6
2
7
3
8
4
9
5
0
SECURITY CODE
FOLLOW NEXT SCREENS
CAREFULLY
COMPLETE OPERATION
WITHIN 60 Sec.
AFTER PRESSING ENTER
4477
(this is just an example)
X
WARNING
4
ERASE PROX
PROX PROGRAMMED: 0
(All Prox have been erased now go to “Program Prox”)
PRESS ENTER KEY
PROGRAM PROX
HOLD PROX NEAR
CENTER CONSOLE
PRESS AND RELEASE
THE UNLOCK BUTTON TWICE
ON THE PROX REMOTE
PROGRAM PROX
KEYS PROGRAMMED: 1
DIAGNOSTIC MENU
> PROGRAM PROX
ERASE PROX
PROX PROGRAMMED
(Now program any additional Fobik’s)
PRESS ENTER KEY
Thats it! Your done.
PROGRAM PROX
MAKE SURE ALL
WIRELESS DEVICES
FOR EXAMPLE
LAPTOP CELL PHONES
ARE NOT CLOSE
TO THE PROX
BEING PROGRAMMED
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
161
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
ADD PROX for ‘GEN 4’
Use this method to ADD
VEHICLE SELECTION
+ AUDI
+ LANDROVER
+ BMW
+ LEXUS
+ CADILLAC
+ MAZDA
+ CHEVROLET
+ MERCEDES
+ CHRYSLER
+ MITSUBISHI
+ DAEWOO USA
+ NISSAN
+ DODGE
+ PONTIAC
p
?
t
q
for “GEN 4” Systems
HAZARDS ON / IGNITION OFF
PRESS ENTER KEY
u
Turn on the Emergency Flashers.
VEHICLE SELECTION
ECU IDENTIFICATION
+ IMMOBILISER
+ REMOTE
+ SKIM READING
p
?
t
VIN: 1D3HV18P79S803764
Part No.: 05026364AK
q
u
PRESS ENTER KEY
VEHICLE SELECTION
CHRYSLER CAN 3
CHRYSLER CAN 4
CHRYSLER CAN 5
TOWN & COUNTRY VAN
+ PROXIMITY
p
?
t
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODE
> SPECIAL FUNCTIONS
q
u
PRESS ENTER KEY
VEHICLE SELECTION
DIAGNOSTIC MENU
FOBIK KEYLESS GO
2011 GEN4 (RFH)
p
?
t
Use your
Smart Card for the
Security Access.
162
q
u
> PROGRAM PROX
ERASE PROX
PROX PROGRAMMED
You will be required to enter the PIN
Code. The PIN Code can usually be
read from the car on these Gen4 RFH
systems.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
continued . . .
1
6
2
7
SECURITY CODE
PROGRAM PROX
____
HOLD PROX NEAR
CENTER CONSOLE
3
8
4
9
5
0
SECURITY CODE
PROGRAM PROX
4477
PROX PROGRAMMED: 3
(this is just an example)
X
PRESS AND RELEASE
THE UNLOCK BUTTON TWICE
ON THE PROX REMOTE
4
(Now program any additional Fobik’s)
PRESS ENTER KEY
PROGRAM PROX
MAKE SURE ALL
WIRELESS DEVICES
FOR EXAMPLE
LAPTOP CELL PHONES
ARE NOT CLOSE
TO THE PROX
BEING PROGRAMMED
Thats it! Your done.
PRESS ENTER KEY
WARNING
FOLLOW NEXT SCREENS
CAREFULLY
COMPLETE OPERATION
WITHIN 60 Sec.
AFTER PRESSING ENTER
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
163
MVP AND TCODE PRO
Powered by ADVANCED DIAGNOSTICS USA
DODGE 2013
(ADS-195)
• 2013 DODGE DART & RAM
FOBIK
• 2013 DODGE DART & RAM
PROXIMITY
• 2014 JEEP GRAND CHEROKEE
There is NO PIN CODE READING available
for these new systems at this time.
(Optional software on TCode PRO units)
164
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
MVP &
TCODE
DODGE 2013
Use this method to PROGRAM FOBIK KEYS
VEHICLE SELECTION
+ALFA
+AUDI
+BENTLEY
+BMW
+CADILLAC
+DODGE
From the “VEHICLE SELECTION” menu, select “+DODGE”. Press the ENTER key. Note: Other vehicle selections may vary depending on software
on your unit
+HONDA/ACURA
+HYUNDAI
+INFINITI
+ISUZU
+IVECO
+JAGUAR
PRESS ENTER KEY
VEHICLE SELECTION
+IMMOBILIZER
+REMOTE
+SKIM READING
Select “+IMMOBILIZER”. Press the ENTER key.
PRESS ENTER KEY
VEHICLE SELECTION
+BY VEHICLE
+BY SYSTEM V1
+BY SYSTEM V2
Select “ +BY VEHICLE”. Press the ENTER key.
PRESS ENTER KEY
VEHICLE SELECTION
+CHARGER
+DAKOTA
+DART
+GRAND CARAVAN
+RAM
PRESS ENTER KEY
VEHICLE SELECTION
OR
+CHARGER
+DAKOTA
+DART
+GRAND CARAVAN
+RAM
Based on the vehicle, select
either “+DART” or “+RAM”. Be
careful, they are not the same.
Press the ENTER key.
PRESS ENTER KEY
VEHICLE SELECTION
+ BASELINE FOBIK
+PROXIMITY
Select “ +BY VEHICLE”. Press the ENTER key.
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
165
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
DODGE 2013
Use this method to PROGRAM FOBIK KEYS
ECU IDENTIFICATION
Switch the vehicle’s hazard lights “ON”.
HAZARDS ON / IGNITION OFF
Leave the ignition in the “OFF” position.
Press the ENTER key.
PRESS ENTER KEY
VEHICLE SELECTION
1C3CDFBA8DD1234567
PART No. 65046808AD
The vehicle’s VIN number the part number for the ECU and the total number of keys programmed should display.
KEYS PROGRAMMED : 4
Press the ENTER key.
PRESS ENTER KEY
DIAGNOSTICS MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
Move the selection pointer > to SPECIAL FUNCTIONS.
Press the ENTER key.
PRESS ENTER KEY
VEHICLE SELECTION
> PROGRAM KEYS
ERASE KEYS
SHIPPING MODE OFF
Move the selection pointer > to PROGRAM KEYS.
Press the ENTER key.
PRESS ENTER KEY
VEHICLE SELECTION
Press the CHECK MARK
or
X TO GO BACK.
ARE YOU SURE
√
TO PROCEED
Make sure you have an UNPROGRAMMED key in the ignition.
X
166
√
Leave the ignition in the OFF position.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
DODGE 2013
Use this method to PROGRAM FOBIK KEYS
SECURITY CODE
Using the touch screen carefully enter the vehicle’s unique 4-digit PIN
CODE. You cannot proceed without the correct code for the car you are
working on.
____
1
2
3
4
5
6
7
8
9
0
SECURITY CODE
The code you have entered will be displayed.
1234
Press the CHECK MARK √ TO PROCEED
or
X TO GO BACK & RE-ENTER a different code.
(EXAMPLE)
X
√
PROGRAM KEYS
PLEASE WAIT
*********
Based on the vehicle, select either “+DART” or “+RAM”. Be careful, they
are not the same. Press the ENTER key.
PRESS ENTER KEY
PROGRAM KEYS
KEYS PROGRAMMED : 3
In this example, there were two keys programmed before the
PROGRAM KEY PROCEDURE was used. The PRO should
now display “KEYS PROGRAMMED: 3”. Repeat this procedure for any additional keys you want to program. (Maximum
eight keys total.)
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
167
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
DODGE 2013
Use this method to ERASE FOBIK KEYS
TROUBLESHOOTING SECTION
DISPLAY FAULT CODES
PROGRAM KEYS
MIS MATCHED ECU
MIS MATCHED RFH HUB
PLEASE WAIT
INCORRECT PIN CODE
*********
PRESS ENTER KEY
If any of the vehicles immobilizer
components have been swapped or
replaced a dealer OEM tool will be
required to MATCH components.
If the PLEASE WAIT SCREEN takes
too long and does not change then
check the key. It is either an already
programmed key or is incorrect.
If you receive this message after
entering the PIN CODE this means
either the PIN CODE is INCORRECT
or the IMMOBILIZER is “LOCKED”.
DIAGNOSTICS MENU
Move the selection pointer > to SPECIAL FUNCTIONS.
Press the ENTER key.
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
PRESS ENTER KEY
VEHICLE SELECTION
Using ERASE KEYS is OPTIONAL on this system.
PROGRAM KEYS
> ERASE KEYS
SHIPPING MODE OFF
You DO NOT have to ERASE KEYS.
Use ERASE KEYS only if you want to CLEAR all previously programmed
keys from memory.
PRESS ENTER KEY
VEHICLE SELECTION
Press the CHECK MARK
or
X TO GO BACK.
ARE YOU SURE
√
TO PROCEED
Make sure you have an UNPROGRAMMED key in the ignition.
X
168
√
Leave the ignition in the OFF position.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
DODGE 2013
Use this method to ERASE FOBIK KEYS
SECURITY CODE
Using the touch screen carefully enter the vehicle’s unique 4-digit PIN
CODE. You cannot proceed without the correct code for the car you are
working on.
____
1
2
3
4
5
6
7
8
9
0
SECURITY CODE
The code you have entered will be displayed.
1234
Press the CHECK MARK √ TO PROCEED
or
X TO GO BACK & RE-ENTER a different code.
(EXAMPLE)
X
√
ERASE KEYS
PLEASE WAIT
*********
“PLEASE WAIT” should display and stars will begin to move across the
screen as the PRO erases ALL keys.
PRESS ENTER KEY
ERASE KEYS
Next go back to the SPECIAL FUNCTIONS MENU & follow the PROGRAM KEYS PROCEDURE to program keys back into the system.
KEYS PROGRAMMED : 0
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
169
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
DODGE 2013
Use this method to ERASE PROX KEYS
DIAGNOSTICS MENU
Select the vehicle you are working on for example:
+DODGE / + BY VEHICLE / +DART / PROXIMITY / SPECIAL FUNCTIONS.
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
Press the ENTER key.
PRESS ENTER KEY
VEHICLE SELECTION
Using ERASE PROX is OPTIONAL on this system.
PROGRAM PROX
> ERASE PROX
SHIPPING MODE OFF
You DO NOT have to ERASE KEYS.
Use ERASE KEYS only if you want to CLEAR all previously programmed
keys from memory.
PRESS ENTER KEY
ERASE PROX
Press the CHECK MARK
or
X TO GO BACK.
ARE YOU SURE
√
TO PROCEED
Leave the ignition in the OFF position.
X
√
SECURITY CODE
Using the touch screen carefully enter the vehicle’s unique 4-digit PIN
CODE.
____
1
2
3
4
5
6
7
8
9
0
The code you have entered will be displayed.
SECURITY CODE
1234
Press the CHECK MARK √ TO PROCEED
or
X TO GO BACK & RE-ENTER a different code.
(EXAMPLE)
X
170
You cannot proceed without the correct code for the car you are working
on.
√
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
DODGE 2013
Use this method to ERASE PROXIMITY KEYS
ERASE PROX
PLEASE WAIT
*********
“PLEASE WAIT” should display and stars will begin to move across the
screen as the PRO erases ALL PROX.
PRESS ENTER KEY
ERASE PROX
PROX PROGRAMMED : 0
Next go back to the SPECIAL FUNCTIONS MENU & select the PROGRAM PROX PROCEDURE to program PROX keys into the system.
PRESS ENTER KEY
WARNING!
Our testing has shown a Catch22 style DESIGN FLAW in the DODGE PROXIMITY SYSTEMS.
DO NOT ERASE PROXIMITY KEYS IF THE VEHICLE IS IN SHIPPING MODE!
Proximity keys CANNOT be programmed if the vehicle is in SHIPPING MODE.
The vehicle cannot be taken out of shipping mode without a WORKING PROXIMITY KEY!
(even with dealer equippment)
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
171
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
DODGE 2013
Use this method to PROGRAM PROX KEYS
DIAGNOSTICS MENU
Select the vehicle you are working on for example: +DODGE / + BY VEHICLE /
+DART / PROXIMITY / SPECIAL FUNCTIONS / PROGRAM PROX
> PROGRAM PROX
ERASE PROX
SHIPPING MODE OFF
Press the ENTER key.
SECURITY CODE
Enter the PIN CODE.
____
1
2
3
4
5
6
7
8
9
0
SECURITY CODE
The code you have entered will be displayed.
1234
Press the CHECK MARK √ TO PROCEED
or
X TO GO BACK & RE-ENTER a different code.
(EXAMPLE)
X
√
PROGRAM PROX
FOLLOW THE NEXT SCREEN
CAREFULLY
COMPLETE OPERATIONS
WITHIN 60 SECONDS
AFTER PRESSING ENTER
Have all the PROXIMITY keys inside the vehicle and ready.
Press ENTER key.
PRESS ENTER KEY
PROGRAM PROX
HOLD PROX NEAR CENTER
CONSOLE
PRESS AND RELEASE THE
UNLOCK BUTTON ON PROX
6 TIMES
THEN PRESS LOCK BUTTON
ON PROX ONCE.
172
As soon as the PROX is programmed the screen should change to the next screen.
If the PROX does not program, after 30 seconds the procedure will time out and
“ERROR” will be displayed. If this occurs try again, however this is usually only
caused by having a incorrect or bad PROX.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
DODGE 2013
PROGRAM PROXIMITY KEYS - Cont’d
PROGRAM KEYS
PROCEDURE COMPLETE
PROX PROGRAMMED : 3
The last screen should display the total number of PROX keys
programmed.
EXIT SHIPPING MODE
DIAGNOSTICS MENU
Pick the make and model.
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
Select: SPECIAL FUNCTIONS.
Press the ENTER key.
DIAGNOSTICS MENU
Select: SHIPPING MODE OFF
PROGRAM KEYS
ERASE KEYS
> SHIPPING MODE OFF
SHIPPING MODE OFF
SWITCH IGNITION ON
CAUTION: The igntion must be switched “ON” in order to exit shipping mode. This
is no problem on FOBIK models, however, on PROX models if NO WORKING
PROX is available the ignition CANNOT be switched “ON”
Prox cannot be programmed while the vehicle is in shipping mode. This is a
CHRYSLER catch 22. If all PROX are lost or erased while in shipping mode the
BCM module will need to be replaced!
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
173
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
SHIPPING MODE OFF
The vehicle should now be out of SHIPPING MODE.
PROCEDURE COMPLETE
Press the ENTER key to return to the special functions menu.
PRESS ENTER KEY
CLEAR DTC’s
DIAGNOSTICS MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
DIAGNOSTICS MENU
> READ FAULT CODES
CLEAR FAULT CODES
Move the selection pointer > to FAULT CODES.
Press the ENTER key.
To READ FAULT CODES:
Move the selection pointer > to READ FAULT CODES.
Press the ENTER key.
DISPLAY FAULT CODES
NO FAULT CODES FOUND
FAULT CODES will be displayed. In this example NO fault codes are present.
Press the ENTER key.
PRESS ENTER KEY
DIAGNOSTIC MENU
READ FAULT CODES
> CLEAR FAULT CODES
To CLEAR FAULT CODES:
Move the selection pointer > to CLEAR FAULT CODES.
Press the ENTER key.
174
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
DODGE 2013
CLEAR DTC’s - Cont’d
CLEAR FAULT CODES
All immobilizer system fault codes have been cleared.
If you read fault codes again and any re-appear there is a problem in the system.
PROCEDURE COMPLETE
Press the ENTER key.
PRESS ENTER KEY
2014 JEEP GRAND CHEROKEE
Dealer Prox required
4-DIGIT PIN CODE IS REQUIRED.
PROGRAM PROX: Use this function to ADD a Prox into the system.
The Remote functions of the Prox program in along with the transponder.
ERASE PROX: Use this function to ERASE all previously programmed Prox from the system. After using ERASE PROX, Any previously programmed Prox will need to be added
back in by using PROGRAM PROX function for each Prox.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
175
MVP &
TCODE
CHRY - DODGE - JEEP
ADVANCED DIAGNOSTICS USA
powered
by
2014 JEEP GRAND CHEROKEE
Use this method to PROGRAM PROX KEYS
DIAGNOSTICS MENU
ATTENTION:
V10.76 or higher is required!
> PROGRAM PROX
ERASE PROX
SHIPPING MODE OFF
Select the vehicle you are working on for example: +JEEP / + BY VEHICLE /
+GRAND CHEROKEE / +2014 / SPECIAL FUNCTIONS / PROGRAM PROX
Press the ENTER key.
SECURITY CODE
Enter the PIN CODE.
____
1
2
3
4
5
6
7
8
9
0
SECURITY CODE
The code you have entered will be displayed.
1234
Press the CHECK MARK √ TO PROCEED
or
X TO GO BACK & RE-ENTER a different code.
(EXAMPLE)
X
√
PROGRAM PROX
FOLLOW THE NEXT SCREEN
CAREFULLY
COMPLETE OPERATIONS
WITHIN 60 SECONDS
AFTER PRESSING ENTER
Have all the PROXIMITY keys inside the vehicle and ready.
Press ENTER key.
PRESS ENTER KEY
PROGRAM PROX
HOLD PROX NEAR CENTER
CONSOLE
PRESS AND RELEASE THE
UNLOCK BUTTON ON PROX
6 TIMES
THEN PRESS LOCK BUTTON
ON PROX ONCE.
176
As soon as the PROX is programmed the screen should change to the next screen.
If the PROX does not program, after 30 seconds the procedure will time out and
“ERROR” will be displayed. If this occurs try again, however this is usually only
caused by having a incorrect or bad PROX.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
powered
by
ADVANCED DIAGNOSTICS USA
CHRY - DODGE - JEEP
MVP &
TCODE
Use this method to PROGRAM PROX KEYS
DIAGNOSTICS MENU
Select the vehicle you are working on for example: +JEEP / + BY VEHICLE /
+GRAND CHEROKEE / +2014 / SPECIAL FUNCTIONS / PROGRAM PROX
> PROGRAM PROX
ERASE PROX
SHIPPING MODE OFF
Press the ENTER key.
SECURITY CODE
Enter the PIN CODE.
____
1
2
3
4
5
6
7
8
9
0
SECURITY CODE
The code you have entered will be displayed.
1234
Press the CHECK MARK √ TO PROCEED
or
X TO GO BACK & RE-ENTER a different code.
(EXAMPLE)
X
√
PROGRAM PROX
FOLLOW THE NEXT SCREEN
CAREFULLY
COMPLETE OPERATIONS
WITHIN 60 SECONDS
AFTER PRESSING ENTER
Have all the PROXIMITY keys inside the vehicle and ready.
Press ENTER key.
PRESS ENTER KEY
PROGRAM PROX
HOLD PROX NEAR CENTER
CONSOLE
PRESS AND RELEASE THE
UNLOCK BUTTON ON PROX
6 TIMES
THEN PRESS LOCK BUTTON
ON PROX ONCE.
As soon as the PROX is programmed the screen should change to the next screen.
If the PROX does not program, after 30 seconds the procedure will time out and
“ERROR” will be displayed. If this occurs try again, however this is usually only
caused by having a incorrect or bad PROX.
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
177
A place for your notes:
178
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.