Threaded Bar and Accessories
Cold Rolled Threaded Bar and Accessories†
Approx. Major
Thread Diameter
Threaded Bar - Grade 75*
Max.
Length
Nominal
Diameter
Minimum Net Area
Thru Threads
Minimum
Ultimate Strength
Minimum
Yield Strength
Nominal
Weight
Approx. Major
Thread Diameter
in
(mm)
in2
(mm2)
kips
(kN)
kips
(kN)
lbs/ft
(kg/m)
in
(mm)
1
0.790
59.3
2.70
1.125
Left Hand
18.3
#9
1 1/8
1.000
75
3.40
1.250
Left Hand
18.3
#10
1 1/4
1.270
95.3
4.30
1.375
Left Hand
18.3
#11
1 3/8
#14
1 3/4
#18
2 1/4
#20
2 1/2
Bar
Designation
#8
25
28
32
35
45
55
64
3
#24
76
3 1/2
#28
89
510.0
645.0
819.0
1.560
1006.0
2.250
1452.0
4.000
2581.0
4.910
3168.0
7.070
4417.0
9.610
6200.0
79
351.4
263.8
100
444.8
333.6
127
564.9
423 .9
156
4.0
5.1
6.4
28.5
32.0
35.0
Thread
Orientation
ft
(m)
60
60
60
60
694.0
520.5
117
5.30
1.500
Left Hand
18.3
225
168.7
7.65
1.875
Right Hand
18.3
300
13.60
2.438
Right Hand
18.3
368
16.69
2.750
Right Hand
18.3
530
24.10
3.250
Right Hand
18.3
720
32.70
3.750
Right Hand
18.3
1000.9
750.4
400
1779.4
1334.5
491
2184.0
1637.0
707
3142.0
2356.0
960
4274.0
3206.0
7.9
11.4
20.2
24.8
35.9
48.7
38.1
47.6
62.0
70.0
82.6
95.3
60
60
60
60
60
Cold rolled threaded bars conform to the physical and chemical requirements of ASTM A 615 Grade 75 ksi “Standard Specification for Deformed Carbon Steel Bars for Concrete Reinforcement”
* Contact your local Skyline Steel representative for information on additional grades of steel.
Approx. Major
Thread Diameter
Threaded Bar - Grade 150
Max.
Length
Nominal Diameter
Minimum Net Area
Thru Threads
Minimum
Ultimate Strength
Minimum
Yield Strength
Nominal
Weight
Approx. Major
Thread Diameter
in
(mm)
in2
(mm2)
kips
(kN)
kips
(kN)
lbs/ft
(kg/m)
in
(mm)
1
0.850
128
102
3.1
4.6
28.6
1 1/8
Left Hand
18.3
1 1/4
1.250
188
150
4.5
1 1/2
Left Hand
18.3
1 3/8
1.580
237
190
5.7
1 5/8
Left Hand
18.3
1 3/4
2.600
2 1/4
4.000
2 1/2
5.190
3350
3457
3
7.060
1059
26
32
36
46
57
65
75
549
807
1019
1664
2581
4554
567
834
1054
390
1735
600
2669
778
4702
454
667
843
320
6.7
8.5
41.3
ft
(m)
60
60
60
60
1423
13.5
50.8
2
Left Hand
18.3
480
13.6
2 7/16
Left Hand
18.3
622
18.3
2 3/4
Left Hand
18.3
847
24.0
3 1/4
Left Hand
18.3
2135
2766
3766
9.1
38.1
Thread
Orientation
20.2
27.2
35.7
62
69.9
82.6
60
60
60
1 inch to 1 3/8 inch diameter, ASTM A 722; 1 3/4 inch to 3 inch diameter bar manufactured in accordance with ASTM A 722 physical and chemical requirements.
Grade 150 ksi steel must not be subjected to localized heating such as welding, cutting torch, or hot grinding.
Please note: As we continuously improve the design of our products, product details are subject to change.
† Contact your sales representative for information on hot dip galvanized and epoxy coated bars.
Technical Hotline: 1-866-875-9546 | engineering@skylinesteel.com
www.skylinesteel.com
Threaded Bar and Accessories
Cold Rolled Threaded Bar and Accessories
Threaded Bar Connectors
Full Load Hex Nuts and Jam Nuts)
OD
A
L
B
A
Full Load Hex Nut
Grade 75 Bar
C
Jam Nut
Grade 75 Bar
OD
L
Weight
in
(mm)
in
(mm)
lbs
(kg)
#8
1.625
4.500
1.55
#9
1.875
5.000
2.39
#10
2.125
5.500
#11
2.250
Weight
A
B
C
in
(mm)
in
(mm)
in
(mm)
#8
1.625
2.000
0.500
0.81
Jam
0.20
#9
1.750
2.000
0.563
0.89
0.25
3.47
#10
2.000
2.187
0.625
1.33
0.38
6.000
4.02
#11
2.250
2.500
0.688
1.96
0.54
#14
2.875
7.875
9.16
#14
2.750
3.250
0.938
3.86
1.11
#18
3.500
9.125
13.93
#18
4.000
4.500
1.000
4.87
1.81
#20
4.000
9.500
19.86
#20*
4.000
4.500
1.125
9.83
2.76
#24
4.750
10.750
31.01
#24**
4.750
4.500
1.500
12.98
4.33
#28
5.500
12.000
46.20
#28**
5.500
6.000
1.563
23.10
6.02
Bar
Designation
41.3
114.3
47.6
127.0
54.0
139.7
57.2
152.4
73.0
200.0
88.9
231.8
101.6
120.6
139.7
241.3
243.0
304.8
Bar
Designation
0.70
1.08
1.57
1.82
4.15
6.32
9.01
14.07
20.96
41.3
44.5
50.8
57.2
69.9
101.6
101.6
120.6
139.7
*Round collar nut available
Grade 150 Bar
Nominal
Diameter
50.8
50.8
55.5
63.5
82.6
114.3
114.3
114.3
152.4
Nominal
Diameter
L
Weight
12.7
in
(mm)
in
(mm)
lbs
(kg)
in
(mm)
1
1.750
4.250
1.70
0.77
26
1
1.750
2.000
1 1/4
2.125
5.250
3.11
1 1/4
2.250
1 3/8
2.375
5.750
4.22
1 3/8
1 3/4
3.000
8.500
9.98
2 1/4
4.000
9.000
2 1/2
4.250
3
5.000
46
57
65
75
60.3
76.2
101.6
108.0
127.0
1.25
4.46
1.96
5.89
2.73
10.48
**Round collar nut with flats
in
(mm)
36
0.82
2.21
28.6
in
(mm)
54.0
0.50
1.75
25.4
C
32
0.24
0.89
23.8
B
44.5
0.17
0.60
17.5
39.7
0.11
0.40
15.9
38.1
0.09
0.37
14.3
A
26
Full
Grade 150 Bar
OD
in
(mm)
lbs
(kg)
in
(mm)
Weight
lbs
(kg)
0.500
Full
0.94
Jam
0.23
2.500
0.625
2.07
0.52
2.500
2.750
0.750
2.78
0.75
1 3/4
3.000
3.500
1.250
4.83
1.70
21.45
2 1/4
4.000
101.6
4.250
107.95
1.500
11.68
4.09
10.000
23.96
2 1/2
4.000
4.750
1.750
10.82
3.99
12.000
41.24
3*
5.000
6.000
2.000
20.62
5.11
108.0
133.4
146.1
215.9
228.6
254.0
308.0
1.41
32
1.91
36
4.53
46
9.73
57
10.87
65
18.71
75
44.5
57.2
63.5
76.2
101.6
127.0
50.8
63.5
69.9
88.9
120.7
152.4
0.43
12.7
0.94
15.9
1.26
19.1
2.19
31.8
38.10
44.45
50.8
5.30
4.91
9.35
0.10
0.24
0.34
0.77
1.86
1.81
2.32
*Round collar nut with flats with outside diameter of 5" (127mm).
Please note: As we continuously improve the design of our products, product details are subject to change.
† Contact your sales representative for information on hot dip galvanized and epoxy coated hardware (available upon request).
Technical Hotline: 1-866-875-9546 | engineering@skylinesteel.com
www.skylinesteel.com
Threaded Bar and Accessories
Cold Rolled Threaded Bar and Accessories
Round Beveled Washers
Hardened Washers
A
B
A
B
C
C
BEVEL
D
Grade 75 Bar
Bar
Designation
#8
#9
#10
#11
#14
#18
#20
#24
#28
Grade 75 Bar
A
B
C
Weight
in
(mm)
in
(mm)
in
(mm)
lbs
(kg)
2.250
Bar
Designation
57.150
30.175
1.188
0.136
0.110
2.500
1.375
0.136
0.130
#9
#10
63.500
34.925
2.750
3.454
3.454
0.05
0.06
#8
69.850
38.887
1.531
0.136
0.160
3.000
76.200
1.625
41.275
0.136
0.190
3.750
2.125
0.178
0.380
#14
#18
95.250
53.975
4.500
3.454
3.454
4.521
0.07
0.09
0.17
#11
114.300
67.488
2.657
0.240
0.710
5.500
3.157
0.240
1.090
#20
#24
139.700
6.000
80.188
6.096
6.096
0.32
0.49
152.400
92.075
3.625
0.375
1.910
7.000
4.125
0.375
2.680
177.800
104.775
9.525
9.525
0.87
1.22
#28
A
B
C
D
Bevel
Weight
in
(mm)
in
(mm)
in
(mm)
in
(mm)
degrees
lbs
(kg)
9.4
0.12
44.45
1.75
28.58
11.68
0.46
0.17
2.63
1.38
0.93
0.23
15
0.69
15
0.66
15
0.66
66.68
2.75
1.13
31.75
1.63
1
26
41.40
24.64
0.97
0.23
2.75
1.63
0.97
0.23
1 1/4
Nominal
Diameter
B
C
Weight
in
(mm)
in
(mm)
in
(mm)
lbs
(kg)
1.375
0.136
0.130
0.06
26
2.500
2.750
34.925
5.84
0.31
0.30
69.85
41.40
24.64
4.00
2.13
1.29
0.23
15
1.94
10
2.46
101.60
4.60
54.10
5.84
0.30
0.88
116.84
66.80
29.97
1.18
0.37
5.00
3.00
1.31
0.43
10
3.10
0.43
10
12.58
10
16.54
127.00
8.00
2.63
32.77
5.84
0.05
76.20
3.50
33.27
1.75
9.40
10.92
203.20
88.90
44.45
10.92
8.00
4.00
2.25
0.84
203.20
101.60
57.15
21.34
1.12
1.41
5.71
7.50
Grade 150 Bar
A
63.500
5.84
69.85
Grade 150 Bar
Nominal
Diameter
in
(mm)
23.62
4.32
3.454
in
(mm)
1
A
B
C
D
Bevel
Weight
in
(mm)
in
(mm)
in
(mm)
in
(mm)
degrees
lbs
(kg)
0.93
0.23
15
0.69
15
0.66
2.63
66.68
1.25
31.75
23.62
5.84
0.31
32
69.850
38.887
1.531
0.136
0.160
1 1/4
32
69.85
41.40
24.64
0.97
0.23
1 3/8
3.250
1.770
0.178
0.300
1 3/8
3.09
1.75
1.06
0.23
15
0.93
1.29
0.23
15
1.94
10
2.46
3.454
36
82.550
44.958
1 3/4
4.000
2.407
0.240
0.550
1 3/4
46
2 1/4
101.600
6.096
0.13
0.25
36
46
2.75
78.49
4.00
101.60
1.63
44.45
2.13
54.10
26.92
32.77
5.84
5.84
5.84
0.30
0.42
0.88
57
114.300
67.488
2.657
0.240
0.710
2 1/4
57
116.84
66.80
29.97
1.18
0.37
2 1/2
5.500
3.157
0.240
1.090
2 1/2
5.00
3.00
1.31
0.43
10
3.10
3.625
0.375
1.910
0.43
10
12.58
65
3
75
4.500
61.138
4.521
0.07
139.700
6.000
152.400
80.188
92.075
6.096
6.096
9.525
0.32
0.49
0.87
64
3
75
4.60
127.00
8.00
203.20
2.63
76.20
3.50
88.90
33.27
1.75
44.45
9.40
10.92
10.92
1.12
1.41
5.71
Please note: As we continuously improve the design of our products, product details are subject to change.
Contact your local Skyline Steel representative for information on additional grades of steel.
Technical Hotline: 1-866-875-9546 | engineering@skylinesteel.com
www.skylinesteel.com
Threaded Bar and Accessories
Cold Rolled Threaded Bar and Accessories
HDPE Plastic Nut Caps**
Bearing Plates
SECTION B
A
B
C
C
B
Grade 75 Bar
Bar
Designation
#8
#9
#10
#11
#14
#18
#20
#24
#28
A
B
C
Weight
in
(mm)
in
(mm)
lbs
(kg)
3/4
13.40
#8 – #11
3/4
13.35
#14 – #28
1
17.73
1
27.86
8
8
203.20
8
203.20
10
254.00
10
254.00
10
254.00
10
254.00
8
203.20
8
203.20
8
203.20
10
254.00
10
254.00
10
254.00
10
254.00
19.05
19.05
25.40
25.40
18.76
in
(mm)
2
54.21
1 – 1 3/8
2 1/2
67.06
63.50
2 1/2
65.46
12
12
2 3/4
104.26
304.80
69.85
26 – 36
24.59
30.42
in
(mm)
1
B
C
Weight
in
(mm)
lbs
(kg)
6
1 1/4
12.76
152.4
1 1/4
7
7
171.5
4.25
10.25
260.4
A
B
C
in
(mm)
in
(mm)
in
(mm)
3.5
2.25
6.75
57.2
171.5
4.25
10.25
108.0
260.4
** “O” ring seal in base of cap.
Anchor Nuts†
A
in
(mm)
6
6.75
57.2
108.0
165.1
47.29
A
152.4
2.25
6.5
46 – 75
29.69
in
(mm)
26
3.5
88.9
1 3/4 – 3
Grade 150 Bar
Nominal
Diameter
C
in
(mm)
6.5
Nominal
Diameter
12.64
41.37
50.80
B
in
(mm)
Plastic Nut Caps for Grade 150 bars
1 1/2
38.10
A
165.1
8.04
63.50
304.80
SECTION B
in
(mm)
88.9
6.06
254.00
10
Bar
Designation
6.08
254.00
10
SECTION A
Plastic Nut Caps for Grade 75 bars
in
(mm)
203.20
A
SECTION A
Bearing plate dimensions reflect typical sizes.
Actual design criteria should be used for specific plate sizing.
N
L
Grade 150 Anchor Nuts
5.79
Diameter
A
L
N
Weight
1 1/2
20.84
in
(mm)
in
mm
in
mm
in
mm
lbs
kgs
31.8
38.1
9.45
32
177.8
177.8
1 3/8
8
8
1 3/4
31.76
14.41
26
1
1.750
2.360
2.45
1.44
3.15
3.03
36
203.2
203.2
1 3/4
9
9
1 3/4
40.20
1 1/4
2.125
3.125
46
228.6
228.6
44.5
44.5
18.23
32
44.5
54.0
59.9
79.5
62.2
80.0
0.65
1.37
57
254.0
254.0
10
2 1/2
70.89
1 3/8
2.375
3.375
85.9
88.9
3.5
4.05
2 1/2
10
10
2 1/2
70.89
1 3/4
3.000
4.000
4.2
7.05
2 3/4
112.31
2 1/4
4.250
5.500
5.6
20.24
2 1/4
10
65
254.0
254.0
3
12
12
75
304.8
304.8
63.5
63.5
69.9
32.16
36
32.16
46
50.94
Please note: As we continuously improve the design of our products, product details are
subject to change.
57
60.3
76.2
108.0
101.6
139.7
106.7
142.2
1.84
3.20
9.18
† Consult your sales representative for availability of different threads and grades.
Technical Hotline: 1-866-875-9546 | engineering@skylinesteel.com
www.skylinesteel.com
Threaded Bar and Accessories
Cold Rolled Threaded Bar and Accessories
Corrosion Protection
Forged Eyes
B
C
Threaded
Portion
A
D
E
Threaded
Portion
F
Bar
Designation
#14
#18
#20
#24
#28
A
B
C
D
E
F
in
(mm)
in
(mm)
in
(mm)
in
(mm)
in
(mm)
in
(mm)
6.1
2.5
2.4
20.0
8.0
2.0
6.1
2.5
2.4
20.0
505
204
8.0
2.0
7.1
3.0
3.0
20.0
10.9
2.4
7.1
3.0
3.0
20.0
10.9
2.4
9.2
3.5
3.5
21.7
11.4
2.8
155
155
180
180
230
63
63
76
76
88
60
60
76
76
90
505
505
505
550
204
277
277
289
50
50
60
60
72
Threads on forged eye will be metric. Conversion couplers available (transition) for all
Skyline Steel thread forms.
Contact your Skyline Steel sales representative for assistance in connection details.
All threaded bars can be supplied with a protective
smooth-walled PVC tube. While the standard PVC tube is
0.035 inch thick, other options are available upon request.
The following additional corrosion protection options are
available for all threaded bars:
Single Corrosion Protection (SCP)
Double Corrosion Protection (DCP)
• Encapsulating: Grease or Grout
• Epoxy Coating
• Galvanizing
• Painting
• Plating
• Taping
Oversized accessories are provided to accommodate
galvanized and coated bars.
Please contact your Skyline Steel Geostructural Solutions
Representative for recommendations on the system that
will best suit your requirements.
Technical Hotline: 1-866-875-9546 | engineering@skylinesteel.com
www.skylinesteel.com
Threaded Bar and Accessories
Tie Bars without Articulation
Normal End Threads
Upset Forged Threads
Thread
Shaft
Recommended
Design Capacity
Thread
Diameter
Shaft
Diameter
DT
Dg
As
Thy
Thu
Ag
Shy
Shu
ASD*
LRFD*
in
mm
in
mm
in2
mm2
kipf
kN
kipf
kN
in2
mm2
kipf
kipf
kipf
kipf
3.3
2.48
63
7.67
4,948
556
2,474
734
3,266
4.83
3,117
350
1,559
463
2,057
210
333
3.5
2.68
8.67
628
830
5.63
408
539
244
3.7
2.76
70
6,273
3.9
2.95
10.84
4.1
3.15
12.02
4.3
3.35
13.26
8,556
4,278
4.5
3.54
4.7
3.54
4.9
3.74
5.1
3.94
5.3
4.13
5.5
4.33
110
14,181
5.7
4.33
5.9
6.1
6.3
6.5
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
68
Tensile Stress
Area
5,591
9.72
Yield
Capacity
2,795
705
Ultimate
Capacity
3,690
931
Gross
Area
3,632
5.97
kN
1,816
433
3,137
4,140
786
1,038
872
1,151
962
1,269
14.56
1,056
1,394
15.92
1,155
1,524
6,781
6,362
17.35
1,258
1,661
10.99
18.83
1,366
1,803
12.17
20.37
1,478
1,950
13.42
8,659
4,330
21.98
1,594
2,104
110
23.65
15,256
1,715
4.53
115
25.37
16,370
8,185
4.72
120
27.16
17,524
1,970
8,762
4.92
125
29.01
18,716
2,104
9,358
5.12
30.92
2,242
75
80
85
90
90
95
100
105
130
6,995
7,755
9,395
10,274
11,191
12,149
13,145
19,948
3,497
3,878
4,697
5,137
4,616
5,119
5,647
6,201
3,848
Yield
Capacity
6.85
4,418
7.79
5,027
8.80
5,675
9.86
6,362
9.86
1,924
497
2,209
565
2,513
638
2,837
715
3,181
715
Ultimate
Capacity
kN
2,397
571
2,540
655
2,916
746
3,318
842
3,745
944
4,199
944
kN
933
1,087
259
1,152
297
1,323
338
1,505
381
1,694
418
1,860
428
3,181
4,199
797
1,052
883
1,165
973
1,285
14.73
1,068
1,410
6,272
2,808
7,628
2,264
10,069
14.73
1,068
1,410
1,840
2,429
10,804
16.10
10,387
1,168
2,600
11,566
17.53
11,310
1,271
2,777
12,353
19.02
12,272
1,379
2,960
20.57
1,492
5,596
6,074
6,573
7,090
9,974
7,386
8,018
8,676
9,359
13,166
7,088
7,854
9,503
9,503
13,273
3,544
3,927
4,752
4,752
5,193
5,655
6,136
6,637
4,678
5,184
5,715
1,905
477
2,122
529
2,351
583
kN
1,481
388
1,725
411
1,828
472
2,098
537
2,388
606
2,695
669
2,976
679
3,022
757
3,367
839
3,731
925
2,593
4,113
631
1,010
6,272
640
2,845
1,015
1,541
6,855
699
3,110
1,109
1,678
7,464
761
3,386
1,208
1,821
8,099
826
3,674
1,310
1,969
888
1,417
8,760
3,950
4,492
4,514
4,934
5,372
5,829
6,305
The recommended design capacities are based on AISC/ASD and AASHTO/LRFD design methodologies for steel structures and retaining walls. An additional reduction factors from EN1993-5
are applied to the tie-rods based on their ability to articulate.
Technical Hotline: 1-866-875-9546 | engineering@skylinesteel.com
www.skylinesteel.com
Threaded Bar and Accessories
Tie Bars with Articulation
Forged Eye
Forged Spherical End
Threaded and Spherical Nut
Thread
Shaft
Recommended
Design Capacity
Thread
Diameter
Shaft
Diameter
DT
Dg
As
Thy
Thu
Ag
Shy
Shu
ASD*
LRFD*
in
mm
in
mm
in2
mm2
kips
kN
kips
kN
in2
mm2
kips
kips
kips
kips
3.3
2.95
75
7.67
4,948
556
2,474
734
3,266
6.85
4,418
497
2,209
655
2,916
297
1,323
472
3.5
3.15
8.67
628
830
7.79
565
746
338
3.7
3.35
85
6,273
3.9
3.54
10.84
4.1
3.74
12.02
4.3
3.94
13.26
8,556
4,278
4.5
4.13
4.7
4.33
110
10,274
4.9
4.53
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
80
Tensile
Stress Area
5,591
9.72
Yield
Capacity
2,795
705
Ultimate
Capacity
3,690
931
Gross
Area
5,027
8.80
kN
2,513
638
3,137
4,140
786
1,038
4,616
6,362
872
1,151
10.99
962
1,269
12.17
14.56
1,056
1,394
13.42
8,659
4,330
15.92
1,155
1,524
115
17.35
11,191
1,258
1,661
4.72
120
18.83
12,149
1,366
4.92
125
20.37
13,145
1,478
5.12
130
21.98
14,181
1,594
5.31
135
23.65
15,256
1,715
7,628
5.51
140
25.37
16,370
1,840
8,185
5.71
145
27.16
17,524
1,970
8,762
5.91
150
29.01
18,716
2,104
9,358
6.10
30.92
2,242
90
95
100
105
155
6,995
7,755
9,395
19,948
3,497
3,878
4,697
5,137
5,596
6,074
6,573
7,090
9,974
5,675
Yield
Capacity
9.86
2,837
715
Ultimate
Capacity
kN
3,318
842
3,745
944
kN
1,505
382
1,699
428
3,181
4,199
797
1,052
883
1,165
973
1,285
14.73
1,068
1,410
6,272
2,845
7,386
16.10
10,387
1,168
1,541
1,803
8,018
17.53
11,310
1,271
1,950
8,676
19.02
12,272
1,379
2,104
9,359
20.57
13,273
1,492
2,264
10,069
22.19
14,314
1,609
2,429
10,804
23.86
15,394
1,730
2,600
11,566
25.60
16,513
2,777
12,353
27.39
17,671
2,960
29.25
5,119
5,647
6,201
6,781
13,166
7,088
7,854
9,503
18,869
3,544
3,927
4,678
5,184
477
2,122
529
2,351
583
2,098
537
2,388
606
2,695
679
3,022
757
3,367
839
3,731
925
2,593
4,113
640
1,015
6,855
699
3,110
1,109
1,678
7,464
761
3,386
1,208
1,821
8,099
826
3,674
1,310
1,969
8,760
893
3,974
1,417
2,124
9,447
963
4,286
1,528
7,697
2,284
10,160
1,036
1,644
1,856
8,256
2,450
10,899
1,111
1,763
1,986
8,836
2,622
11,663
1,189
1,887
2,121
2,800
1,270
2,015
4,752
5,193
5,655
6,136
6,637
7,157
9,435
5,715
1,905
kN
12,454
4,609
4,944
5,291
5,649
4,514
4,934
5,372
5,829
6,305
6,799
7,312
7,844
8,394
8,963
The recommended design capacities are based on AISC/ASD and AASHTO/LRFD design methodologies for steel structures and retaining walls. An additional reduction factors from EN1993-5
are applied to the tie-rods based on their ability to articulate.
Technical Hotline: 1-866-875-9546 | engineering@skylinesteel.com
www.skylinesteel.com
Threaded Bar and Accessories
Hot Rolled Threaded Bar and Accessories
Approx. Major
Thread Diameter
Hot Rolled Threaded Bar – Grade 75 – ASTM A 615
Bar
Designation
Nominal
Diameter
Minimum Net Area
Thru Threads
Minimum
Ultimate Strength
Minimum
Yield Strength
Nominal
Weight
Approx. Major
Thread Diameter
in
(mm)
in2
(mm2)
kips
(kN)
kips
(kN)
lbs/ft
(kg/m)
in
(mm)
#6
3/4
#7
7/8
#8
20
22
1
25
#9
1-1/8
#10
1-1/4
#11
1-3/8
#14
1-3/4
28
32
35
45
0.44
284.00
0.60
387.00
0.79
44
196
Thread
Orientation*
Max.
Length
ft
(m)
147
2.24
1.5
0.86
Left Hand
60
33
21.8
18
267
200
45
2.04
0.99
Left Hand
60
79
59.3
2.67
1.12
Left Hand
60
3.4
1.26
Left Hand
60
60
1.00
100
449
333
1.27
127
95.3
423
6.41
4.3
1.43
Left Hand
60
1.56
156
117
5.31
1.61
Left Hand
60
225
168.8
7.65
1.86
Right Hand
60
819.00
1006.00
2.25
1452.00
565
694
1001
520
751
5.06
7.91
11.39
28.4
18
351
75
3.98
25.1
510.00
645.00
264
3.04
32
36.3
40.9
47.2
18
18
18
18
18
Hot rolled threaded bars conform (Excluding the requirement of: “legibly rolled surface markings.”) to the requirements of ASTM A 615 Grade 75 ksi (520 Mpa) “Standard Specification for
Deformed Carbon Steel Bars for Concrete Reinforcement”
† Contact your sales representative for information on hot dip galvanized and epoxy coated bars.
Technical Hotline: 1-866-875-9546 | engineering@skylinesteel.com
www.skylinesteel.com
Threaded Bar and Accessories
Hot Rolled Threaded Bar and Accessories
Couplers
Hex Nuts (Full Load and Jam Nuts)
OD
L
A
B
A
C
Hex Nut
Jam Nut
Grade 75 – ASTM A 576, A 108
Bar
Designation
Nominal
Diameter
Grade 75 – ASTM A 576, A 108
Weight
L
OD
in
(mm)
in
(mm)
in
(mm)
lbs
(kg)
#6
3/4
20
1.25
31.75
3.125
0.62
#7
7/8
22
1.50
38.10
3.75
95.25
0.93
#8
1
1.625
41.27
4.00
101.60
1.37
#9
1-1/8
1.875
47.62
5.00
127.00
2.31
#10
1-1/4
32
2.00
50.80
5.75
146.05
2.77
#11
1-3/8
35
2.25
57.15
6.40
162.56
3.79
#14
1-3/4
2.88
7.85
5.49
25
28
45
79.37
73.15
192.53
0.28
0.42
0.62
1.05
1.26
1.72
2.49
A
B
C
in
(mm)
in
(mm)
in
(mm)
in
(mm)
Full
Jam
#6
3/4
1.125
28.57
1.45
36.83
0.87
22.10
0.26
0.16
#7
7/8
1.375
34.92
1.75
44.45
0.87
22.10
0.43
0.21
#8
1
1.50
1.84
0.87
0.56
0.26
20
22
lbs
(kg)
0.12
0.20
0.10
25
38.10
46.74
22.10
#9
28
1.75
44.45
2.25
57.15
0.87
22.10
0.97
0.37
#10
1-1/4
32
2.00
50.80
2.50
63.50
1.00
25.40
1.43
0.56
#11
1-3/8
35
2.25
57.15
2.75
69.85
1.00
25.40
1.52
0.53
#14
1-3/4
2.50
3.60
1.00
3.02
0.82
45
63.50
91.44
0.25
0.07
1-1/8
Hardened Washers
A
B
Weight
Nominal
Diameter
Bar
Designation
0.43
0.65
0.69
25.40
1.37
0.12
0.17
0.25
0.24
0.37
Beveled Washers
C
A
A
B
B
C
A
Grade 75 – ASTM F 436
Bar
Designation
A
B
C
Weight
in
(mm)
in
(mm)
in
(mm)
in
(mm)
lbs
(kg)
1.75
0.938
.136
0.07
2.00
1.063
.136
0.09
2.25
1.188
.136
0.11
2.50
1.375
.136
0.13
2.75
1.531
.136
0.16
3.00
1.625
.136
0.19
1.77
.178
0.30
3/4
#7
7/8
#8
Grade 75 – F 436, A536 80-55-06
Nominal
Diameter
#6
20
22
1
25
#9
1-1/8
#10
1-1/4
#11
1-3/8
#14
1-3/4
28
32
35
45
44.45
50.80
57.15
63.50
69.85
76.20
3.25
82.55
23.83
27.00
30.18
34.92
38.89
41.27
44.96
D
3.45
3.45
3.45
3.45
3.45
3.4
4.52
0.03
0.04
0.05
0.06
0.07
0.09
0.14
Bar
Designation
Nominal
Diameter
A
B
C
in
(mm)
in
(mm)
in
(mm)
in
(mm)
#6
3/4
#7
7/8
#8
20
22
1
25
#9
1-1/8
#10
1-1/4
#11
1-3/8
#14
1-3/4
28
32
35
45
1.75
44.45
1.75
44.45
1.75
44.45
2.63
66.80
2.75
69.85
3.09
78.49
4.00
10.16
.95
24.13
1.14
28.96
1.14
28.96
1.38
31.75
1.63
41.40
1.75
44.45
2.13
54.10
.78
19.81
.78
19.81
.78
19.81
.93
23.62
.97
24.64
1.06
26.92
1.29
32.77
D
Bevel
in
degrees
(mm)
Weight
lbs
(kg)
.32
.32
15
0.15
.32
15
0.17
.23
15
0.17
.23
15
0.29
.23
15
0.30
.23
15
0.45
.23
15
8.13
8.13
5.84
5.84
5.84
5.84
5.84
.37
.37
.64
.66
.93
1.94
0.88
Please note: As we continuously improve the design of our products, product details are subject to change.
Technical Hotline: 1-866-875-9546 | engineering@skylinesteel.com
www.skylinesteel.com