www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Engine Cooling:
71044 EzePak Cool ™ For Mk3.1 Complete Roadster Kit
Here are all the accessories needed to complete your cooling system!
$257.00
Includes fabricated aluminum fan shroud, HD Stainless Upper Radiator and Shroud Mounting Hardware
Kit, Lower Radiator Support Kit, Coolant Expansion/Recovery Reservoir, 70612 Stainless Mounting
Bracket for corrugated lower hose, 90 degree elbow molded hose for connecting your thermostat housing to the FFR supplied 1.25" Coolant Fill Port, and 10 upgraded Made-In-USA Breeze All-Stainless Liner
Clamps to replace all FFR supplied clamps.
71028 EzePak Cool ™ MkIII $619.50
Everything to complete your high capacity cooling system in one feature-rich easy to order package! Made in USA.
Includes a made in USA aluminum radiator with 2 rows of 1” tubes, 1.5” inlet, 1.75” outlet, (both ¼” larger than Mustang stock radiator) 28” overall width with a billet filler neck, 31133 radiator cap, 32088
Aluminum Shroud (supplied blank, you cut to fit your FFR or other electric fan), 70558 Hinged Mounting
Kit, 70551 Lower Radiator Support Kit, 1.5” stainless steel upper coolant tube with fill port, coolant tube coupler hoses with stainless steel liner clamps, 70552 Coolant Reservoir Kit, adjustable mechanical fan control, and 70612 stainless steel lower hose bracket.
Notes: Hose arrangement is for 302/351 blocks with 90 degree thermostat housing. Upper tube is routed inside engine compartment.
If your Roadster was originally scheduled for delivery before 9-15-07, you will also need to order #32037
Corrugated Stainless Radiator Hose Kit.
71030 EzePak Cool ™ for use with FFR Supplied AFCO Radiator $413.00
This is the EzePak to get if you have already purchased your radiator from Factory Five.
Includes 32088 Aluminum Shroud (supplied blank, you cut to fit your FFR or other electric fan), 70551
Lower Radiator Support Kit, 1.5” -1.5” OD Billet Aluminum Fill Port Kit, Corrugated 24” Stainless Radiator
Hose Kit for upper Hose, Coolant Reservoir Kit, 32037 Corrugated 36” Stainless Radiator Hose Kit for lower hose, adjustable mechanical fan control, 70587 Stainless Mounting Hardware kit, 70612 stainless steel lower hose bracket, and sketch and instructions.
Note: Hose arrangement is for 302/351 blocks with 90 degree thermostat housing. Upper hose is routed inside engine compartment.
Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 1 of 6

www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Engine Cooling: (continued)
70031 Radiator Cowl Cover Kit with Semi-Gloss Black
Powdercoat finish, for use with FFR Hood Hinges
Force all of that cooling air through your radiator! Reduce hot backwash! Includes rivets and instructions.
Made in USA.
35287 Radiator Cowl Cover for use with Traditional Hood Hinges
(35201)
Supplied in bare 6061 aluminum, which matches the aluminum panels supplied by FFR. This cover extends over the top edge of the radiator. Made in USA.
70010 Coolant Fill “T” Kit, With Radiator Cap 1.25” to 1.25” Hose, for use with Donor Mustang Radiator
Includes 16lb pressure cap, 1 ¼” O.D. billet aluminum filler “T”,
Brass NPT to hose barb fitting, marine grade lined all-stainless hose clamps, tubing to connect to a recovery reservoir, and instructions.
70586 Coolant Fill “T” Kit, With Radiator Cap 1.5” to 1.5” Hose, for use with FFR/AFCO Radiator.
1.5” OD outlet matches the diameter of the Factory Five supplied
AFCO radiator inlet.
70587 HD Upper Radiator and Shroud Mounting Hardware Kit for
FFR/AFCO Radiator.
All stainless steel hardware kit for attaching the radiator and our
#32088 aluminum shroud to the upper frame of the FFR
Roadster. (included with 71030)
70558 Heavy Duty Hinged Radiator/Shroud Mounting Kit for
Aluminum Radiators with Radiator Caps.
This kit includes a continuous stainless steel hinge to attach the radiator to the frame to provide clearance for the radiator cap and adjustment of the radiator angle. Comes with EzePak Cool. Made in USA.
$36.00
$33.00
$69.00
$85.00
$20.00
$37.00
Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 2 of 6

www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Engine Cooling: (continued)
70551 Lower Radiator Support Kit
This kit allows the radiator to be fully supported independent of the body. Includes ½” square steel cross-bar with adjustable hanger tabs to fit any radiator. Rubber insulator system provides compliant support for delicate aluminum radiators. Works with any radiator, comes with EzePak Cool. Made in USA.
32037 Corrugated Stainless Radiator Hose Kit, 36”
This hose kit is used for the MkIII Roadster in place of the OEM
Mustang lower hose/FFR Coupler/FFR lower hose assembly.
Includes 4 each #20305 upgraded Breeze (made in USA) stainless steel liner clamps.
70612 Stainless Bracket Kit for Corrugated Radiator Hose
This bracket secures your corrugated lower radiator hose to the bottom of the X-member for a rugged and durable lower hose installation. Note: This bracket is included with all EzePak Cool kits.
35167 Corrugated Stainless Radiator Hose Kit, 24”
Includes 4 each #20305 upgraded Breeze (made in USA) stainless steel liner clamps.
$37.00
$70.00
$19.00
$57.00
31133 Cap, Radiator, Gates/ Stant, 16 lb
Constant pressure, spring-loaded vent fitting
$7.50
31005 Cap, Radiator, 16lb, Gates/ Stant 10231,(Open Vent)
Open, non-spring-loaded vent fitting
$7.50
Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 3 of 6

www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Engine Cooling: (continued)
32088 Aluminum Fan Shroud $59.00
This tapered aluminum fan shroud comes with EzePak Cool ™ and also fits Factory Five and other aluminum radiators. Supplied blank - you cut the fan hole to the exact shape with mounting tabs to fit your fan. Made in USA.
The fan mounting surface measures 17 3/4" x 18 3/4". Made from .070" aluminum, with welded corners.
Measures 22" wide by 18" tall, plus 3/4" flanges for attaching to the upper and lower radiator flanges.
Depth is 2-5/8". The fan shown is the stock small block fan supplied by FFR. (fan not included) For installation hardware see #70587.
70552 Reservoir Kit, Coolant Expansion/Recovery, After-market $26.00
A lower cost alternative to the OEM unit. 2 quart capacity rectangular polyethylene container with cap and bottom nipple.
We supply hose and stainless hardware for mounting to the driver side “F-Panel”, and ¼” hose barb.
(requires 6.5”wide x 7”tall mounting surface)
70014 Heater Hard Line Reducer Kit $15.00
Reduces the donor ¾’ O.D. heater hard line to 5/8” O.D. to facilitate connection to 5/8” O.D. heater core fittings. Includes brass reducer, all stainless steel lined marine grade hose clamps, and adapter hose.
20301 Clamp, Hose, #08, Lined, Marine Grade, all Stainless, ½ –
1” dia. Made in USA.
20302 Clamp, Hose, #10, Lined, Marine Grade, all Stainless,
11/16 – 1 1/8” dia. Made in USA.
20303 Clamp, Hose, #20 Lined, Marine Grade all Stainless
(upper hose to radiator, upper radiator hose to ext. tube). Made in
USA.
20304 Clamp, Hose, #24 Lined, Marine Grade all Stainless
(upper hose to thermostat housing, lower hose to radiator and coupling tube). Made in USA.
20305 Clamp, Hose, #28 Lined, Marine Grade all Stainless
(lower hose to water pump inlet). Made in USA.
$2.50
$2.50
$2.75
$2.75
$2.75
70084 Heater Delete Hose Kit for 5.0 EFI (loop-back hose and clamps)
Includes loop-back hose and all stainless marine grade hose clamps.
$15.00
Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 4 of 6

www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Engine Cooling: (continued)
70502 Bypass Hose Kit for all small block Ford
Includes bypass hose and all stainless marine grade hose clamps
$12.00
70503 Front Heater Hose Kit for 5.0 (heater hard line to water pump)
Includes molded front heater hose and all stainless marine grade hose clamps
30198 Heater Delete ECT Sensor Elbow Fitting - For EFI cars, eliminates the heater hard lines but maintains ECT sensor port.
Notes: Also eliminates EGR spacer coolant flow. ¾” hose barb matches CW rotation water pump fitting (CCW pump has 5/8” fitting). ½” NPT male to manifold, 3/8” NPT female for sensor
70540 ECT Sensor Elbow Kit for 5/8” Heater Hose
Connects intake manifold to reverse rotation (CCW) water pump with port for ECT sensor
$28.00
$15.00
$29.00
70541 Elbow Kit for 3/4" Heater Hose
For carbureted applications (no ECT sensor) without heater, connects intake manifold port to regular rotation (CW) water pump. Can be used with heater with customer supplied ¾” hoses.
70571 Elbow Kit for 5/8" Heater Hose
For carbureted applications without heater, connects intake manifold port to reverse rotation (CCW) water pump. Can be used with heater with customer supplied 5/8” hoses.
$23.00
$19.00
Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 5 of 6

www.breezeautomotive.com
Call 508 533-6455 for product recommendations and to place your order!
Engine Cooling: (continued)
30231 Thermostat Housing/Water Neck, 90 Degree, OEM Ford
Cast Aluminum
Ford List $143.44. We prefer to install this with our #21079
Permatex Ultra Black without a paper gasket. See also #70536
Thermostat Housing Bolt Kit and #30111 Thermostat
70536 Thermostat Housing Bolt Kit
Includes all stainless steel hex head bolts (different lengths), AN washers, and split lock washers.
30111 Thermostat, 192°, Motorcraft
192° is the correct temperature for the Ford EFI co mputer including MassFlo ™ EFI. Also works fine for carbureted applications.
70635 Adjustable Thermostatic Cooling Fan Switch
This kit provides a mechanical thermostatic cooling fan control with an adjustable set-point. The probe inserts between the radiator tubes and fins and does not require plumbing into the coolant flow.
70619 90° Hose Elbow, 1.5” to 1.25”
90 Degree Hose Elbow to connect the Small Block Ford 90 degree thermostat housing 1.5" outlet to the Factory Five supplied 1.25" Radiator Fill port. This hose eliminates the bulky and complex assembly required when using corrugated stainless hose to make a compact 90 degree transition. Includes two properly sized Breeze all-stainless steel liner clamps
70637 90° Hose Elbow, 1.5” to 1.5”
90 Degree Hose Elbow to connect the Small Block Ford 90 degree thermostat housing 1.5" outlet to any 1.5" Radiator Fill port. This hose eliminates the bulky and complex assembly required when using corrugated stainless hose to make a compact 90 degree transition. Includes two properly sized Breeze all-stainless steel liner clamps. Same as supplied with EzePak
Cool. Made entirely in USA.
$99.00
$4.50
$8.50
$45.00
$29.00
$29.00
Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 6 of 6