High
HighPerformance
PerformanceButterfly
ButterflyValves
Valves
Index
Index
Features
Features&&Benefits
Benefits
HPHPSeries
SeriesLug
Lugwith
withLever
Lever2 21/2"
1/2"- 8"
- 8"
HPHPSeries
SeriesLug
Lugwith
withGear
Gear2 21/2"
1/2"8"8"
HPHPSeries
SeriesLug
Lugwith
withGear
Gear10"
10"- 24"
- 24"
HPHPSeries
SeriesWafer
Waferwith
withLever
Lever2 21/2"
1/2"- 8"
- 8"
HPHPSeries
SeriesWafer
Waferwith
withGear
Gear2 21/2"
1/2"- 8"
- 8"
HPHPSeries
SeriesWafer
Waferwith
withGear
Gear10"
10"- 18"
- 18"
HP-1
HP-1
HP-2
HP-2
HP-3
HP-3
HP-4
HP-4
HP-5
HP-5
HP-6
HP-6
HP-7
HP-7
04/16
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change
design, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see the
Technical/Service Information section on our website. For the most current information access www.milwaukeevalve.com
MILWAUKEE VALVE
HP Series:
Milwaukee Valve Company
High Performance Butterfly Valves
Features and Benefits
• D
ouble offset geometry to provide superior sealing with
minimal seat contact and wear.
• Machined, tapered seat provides multiple sealing edges.
C
M
Y
CM
MY
CY
K
CMY
• S
ingle piece shaft and disc designed for maximum
strength and Cv.
• Internally cast disc position stop to prevent disc over travel while maintaining
optimum disc/seat contact.
• S
tem is centered in the adjustable stem packing by oversized bearings
eliminating stem leakage and fugitive emissions.
• Disc spacers to center disc in seat to eliminate seat distortion.
• Blow out proof stem prevents injury and product loss.
• C
ombination mechanical and pressure energized seat design for
repeatable and reliable sealing performance and extended cycle life
• S
ealing retaining ring designed
end service
(lug style) and150
allows
Deg. Ffor double
TFM dead
RTFE
steam
easy removal for seat replacement.
-20
740
740
150
285
100
740
740
150
225
670
670
300
655
468.6
350
645& 300
334
Size Class: 2-1/2”-24”, ASME/ANSI
Class 150
535
200
Body Configuration: Wafer and Lug400
500
275
150
150
150
150
285
260
252.5
230
215
200
• Stem/disc connection ensures minimal
lost675
motion and675
high strength.
200
150
Product Range
Operators Available
10 Position Lever Handle, Gear Operators, Pneumatic and
Electric Actuators
Body
Disc
Stem
Bearing
Seat
Pressure (psig)
Material of Standard
468.5714 Construction
334.2857
Carbon
Steel or CF8M 316 Stainless Steel
CF8M 316 Stainless Steel
17-4 PH Stainless Steel
Stainless backed RTFE
RTFE/Stainless Garter Spring
Specifications
C
M
Y
CM
MY
CY
K
CMY
Valve Sizes 2-1/2” through 24”
Flanged Ends Connections per ASME/ANSI B16.5.
800
700
600
500
400
300
200
100
0
Valve face to face dimension per MSS-SP-68.
H.P. Lug Pattern
HPBV Pressure/Temperature Chart
-2.68571
-201.429150/300
-335.714Pound Class WCB
468.5714 334.2857
RTFE/300 Pound Class
Steam Limit
150 Pound Class
-20
100
200
225
300
350
400
Temperature (deg. F)
1
Phone 262 432 2800
Revision A
2-1/2” through 16”
Class 300
740 psi
720 psi
7/8/15
Valve
tests meet MSS-SP-61.
Fax pressure
262 432 2701
Valve testing and inspection meet API 598.
*Valve is rated @150 PSI steam for on & off application and
50 PSI modulating service. (Limit Range 30º-70º - No Dwell In
Near Closed Position.)
1:46 PM
Tagging meets the requirements of MSS-SP-25 and API 609B.
HOW TO ORDER MILWAUKEE VALVES HP SERIES HIGH PERFORMANCE BUTTERFLY VALVE
SERIES
XX
HP
ANSI
CLASS
X
1-150
3-300
HPBV CONFIGURATOR.pdf
Valve bodies are cast high quality steel, with
Pressure Ratings*
standard availability in ASTM-A216 WCB CS and
(Cold Working Pressure)
ASTM A-351 CF8M SS. Body wall thickness meets
2-1/2” through 24”
ASME/ANSI B16.34 and complies with quality
standard for steel castings MSS-SP-55.
Class 150
Milwaukee Valve HPBV Top Level Matrix
Carbon Steel
285 psi
Valvevalve
Company
HighMilwaukee
performance
meets the requirements of
16550 West Stratton Drive
MSS-SP-68
double offset design.
Stainless Steel
275 psi
New Berlin, WIfor
53151
BODY
BODY
DISC
STEM
SEAT
STEM
STYLE
MATERIAL MATERIAL MATERIAL MATERIAL
PACKIING
OPERATOR
X
X
X
X
X
X
X
L-LUG
C-WCB
S-CF8M
4-17-4 SS 1-PTFE
1-PTFE
1-BARE STEM
W-WAFER S-CF8M
5-316 SS
2-RPTFE
G-GRAPHITE 2-LEVER-LOCK
4-UHMWPE
3-GEAR OP
4-ELECTRIC
5-PNEUMATIC
6-Epoxy Ctd. Gear Op
7-Epoxy Ctd. Lever-Lock
EXT. OPTIONS
XX
A-Assemble Dry
C-Chlorine Clean
E-Extended Mounting
L-Locking
O-Oxygen Clean (Consult Factory)
SIZE
XXX
025-240
S-Stainless Steel Seat Retainer
U-Assembled in USA
PART NUMBER EXAMPLE
HP1LC4111 040 = 4 INCH,HIGH PERFORMANCE,CLASS 150,LUG PATTERN,CARBON STEEL BODY,17-4 STEM,PTFE SEAT,PTFE PACKING,BARE STEM WITH NO EXT
OPTIONS
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change
design, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see the
Technical/Service Information section on our website. For the most current information access www.milwaukeevalve.com
HP-1
MILWAUKEE VALVE
Rev. 4
HP Series Lug 2 1/2” - 8” with Lever
2-1/2" - 6" 150/300 LB & 8" 150 LB LUG WITH HANDLE
MATERIAL
A. CARBON STEEL
BODY
B. STAINLESS STEEL
STEM & DISC ASSEMBLY
2B. DISC
STAINLESS STEEL
2C. STEM
STAINLESS STEEL
2D. TAPER PIN
18-8 STAINLESS STEEL
STEM RETAINER
304 STAINLESS STEEL
A. CARBON STEEL
SEAT RETAINER RING
B. STAINLESS STEEL
STAINLESS STEEL
SOCKET HEAD CAP SCREW
A. PTFE COMMERCIAL
SEAT
B. 15% GLS. FLD. PTFE
C. UHMWPE
SEAT SPRING
STAINLESS STEEL
DISC SPACER
316 STAINLESS STEEL
BEARING
STAINLESS STEEL - PTFE COATED
BOTTOM CAP
STAINLESS STEEL
GRAPHITE
BOTTOM SEAL
HEX HEAD CAP SCREW
STAINLESS STEEL
SPLIT LOCKWASHER
STAINLESS STEEL
A. PTFE COMMERCIAL
PACKING V-RING SET
B. GRAPHITE
PACKING WASHER
304 STAINLESS STEEL
GLAND FOLLOWER
STAINLESS STEEL
GLAND RETAINER
STAINLESS STEEL
STUD
STAINLESS STEEL
HEAVY HEX NUT
STAINLESS STEEL
SOCKET HEAD CAP SCREW
STAINLESS STEEL
SPLIT LOCKWASHER
STAINLESS STEEL
HANDLE ASSY
DUCTILE IRON
ITEM NO. PARTS NAME
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
SPECIFICATION
ASTM A216 GR. WCB
ASTM A351 GR. CF8M
ASTM A351 GR. CF8M
17-4PH H1150
COMMERCIAL
COMMERCIAL
ASTM A515 GR. 70
ASTM A240 TY.316
ASTM A193 GR. B8M
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
ASTM A351 GR. CF8M
COMMERCIAL
ASTM A193, GR. B8M
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
ASTM A351 GR. CF8M
ASTM A351 GR. CF8M
ASTM A193 GR. B8M
ASTM A194 GR. 8M
ASTM A193 GR. B8M
COMMERCIAL
COMMERCIAL
(4x)
2.5" CLASS 150 HP LUG SHOWN
2.5" ‐ 6" 150/300LB & 8" 150LB LUG WITH HANDLE
VALVE DIMENSIONS
STEM CONNECTION
CORE DIMS
TOP WORKS
"J" ØSTEM "K" SQUARE "L" LENGTH "L2" "M" LENGTH "N" KEYWAY ØQ1 ØQ2
VALVE SIZE "A" HEIGHT "B" HEIGHT "C" B.C "D" TAP # OF HOLES "E" FACE "F" "H" B.C
2.5" 150 LUG
5.59
11.24
5.50
5/8‐11
4
1.88
16.87
3.25
0.62
0.46
1.02
N/A
1.64
N/A
1.72 1.97
2.5" 300 LUG
5.59
12.01
5.88
3/4‐10
8
1.88
16.87
3.25
0.62
0.46
1.02
N/A
1.64
N/A
1.72 1.97
3" 150 LUG
5.59
11.24
6.00
5/8‐11
4
1.88
16.87
3.25
0.62
0.46
1.02
N/A
1.72
N/A
2.28 2.47
3" 300 LUG
5.59
11.97
6.63
3/4‐10
8
1.88
16.87
3.25
0.62
0.46
1.02
N/A
1.72
N/A
2.28 2.47
4" 150 LUG
6.25
12.77
7.50
5/8‐11
8
2.13
16.87
3.25
0.62
0.46
1.02
N/A
1.56
N/A
3.06 3.53
4" 300 LUG
6.25
13.05
7.88
3/4‐10
8
2.13
16.87
3.25
0.62
0.46
1.02
N/A
1.56
N/A
3.06 3.53
5" 150 LUG
7.69
15.52
8.50
3/4‐10
8
2.13
19.87
4.25
0.87
0.64
1.04
N/A
1.69
N/A
4.35 4.46
5" 300 LUG
7.69
15.52
9.25
3/4‐10
8
2.13
19.87
4.25
0.87
0.64
1.04
N/A
1.69
N/A
4.35 4.46
6" 150 LUG
7.69
15.52
9.50
3/4‐10
8
2.25
19.87
4.25
0.87
0.64
1.04
N/A
1.69
N/A
5.33 5.43
6' 300 LUG
7.69
16.56
10.63
3/4‐10
12
2.31
19.87
4.25
0.87
0.64
1.04
N/A
1.69
N/A
5.33 5.39
8" 150 LUG
9.51
19.27
13.00
3/4‐10
8
2.63
22.85
4.75
1.12
N/A
N/A
1.50
1.86
0.25
7.10 7.37
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change
design, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see the
Technical/Service Information section on our website. For the most current information access www.milwaukeevalve.com
HP-2
MILWAUKEE VALVE
Bolt Ø
0.27
0.27
0.27
0.27
0.27
0.27
0.44
0.44
0.44
0.44
0.56
Rev. 2
HP Series Lug 2 1/2” - 8” with Gear
Class 150 and 300
2-1/2" - 6" 150/300 LB & 8" 150 LB LUG WITH GEAR
MATERIAL
A. CARBON STEEL
BODY
B. STAINLESS STEEL
STEM & DISC ASSEMBLY
2B. DISC
STAINLESS STEEL
2C. STEM
STAINLESS STEEL
2D. TAPER PIN
18-8 STAINLESS STEEL
STEM RETAINER
304 STAINLESS STEEL
A. CARBON STEEL
SEAT RETAINER RING
B. STAINLESS STEEL
STAINLESS STEEL
SOCKET HEAD CAP SCREW
A. PTFE COMMERCIAL
SEAT
B. 15% GLS. FLD. PTFE
C. UHMWPE
SEAT SPRING
STAINLESS STEEL
DISC SPACER
316 STAINLESS STEEL
BEARING
STAINLESS STEEL - PTFE COATED
BOTTOM CAP
STAINLESS STEEL
GRAPHITE
BOTTOM SEAL
HEX HEAD CAP SCREW
STAINLESS STEEL
SPLIT LOCKWASHER
STAINLESS STEEL
A. PTFE COMMERCIAL
PACKING V-RING SET
B. GRAPHITE
PACKING WASHER
304 STAINLESS STEEL
GLAND FOLLOWER
STAINLESS STEEL
GLAND RETAINER
STAINLESS STEEL
STUD
STAINLESS STEEL
HEAVY HEX NUT
STAINLESS STEEL
CORE
CONNECTION
SOCKETSTEM
HEAD CAP
SCREW
STAINLESS
STEELDIMS
"K"
SPLISQUARE
T LOCKWASH"L"
ER LENGTH "M" LENGTH ST"N"
AINLESØQ1
S STEELØQ2
HAN0.46
DLE ASSY
DU
CTILE 1.72
IRON 1.97
1.02
1.64
N/A
ITEM NO. PARTS NAME
1
2
3
4
5
6
7
8
9
10
11
12
13
14
2.5" - 8" 150/300 LUG WITH GEAR
HOLES "E" FACE
4
1.88
8
1.88
4
1.88
8
1.88
8
2.13
8
2.13
8
2.13
8
2.13
8
2.25
12
2.31
8
2.63
12
2.88
"F"
6.37
6.37
6.37
6.37
6.37
6.37
6.02
6.02
6.02
6.02
7.93
7.93
HANDWHEEL TOP WORKS
"G" DIA
"H" B.C
6
3.25
6
3.25
6
3.25
6
3.25
6
3.25
6
3.25
9
4.25
9
4.25
9
4.25
9
4.25
12
4.75
12
4.75
15
16
17
18
19
20
"J" ØSTEM
21
0.6222
0.62
0.62
0.62
0.62
0.62
0.87
0.87
0.87
0.87
1.12
1.12
0.46
0.46
0.46
0.46
0.46
0.64
0.64
0.64
0.64
N/A
N/A
1.02
1.64
1.02
1.72
1.02
1.72
1.02
1.56
1.02
1.56
1.04
1.69
1.04
1.69
1.04
1.69
1.04
1.69
N/A
1.86
KEY
DETAIL1.86
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.25
0.25
1.72
2.28
2.28
3.06
3.06
4.53
4.53
5.33
5.33
7.10
7.10
SPECIFICATION
ASTM A216 GR. WCB
ASTM A351 GR. CF8M
ASTM A351 GR. CF8M
17-4PH H1150
COMMERCIAL
COMMERCIAL
ASTM A515 GR. 70
ASTM A240 TY.316
ASTM A193 GR. B8M
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
ASTM A351 GR. CF8M
COMMERCIAL
ASTM A193, GR. B8M
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
ASTM A351 GR. CF8M
ASTM A351 GR. CF8M
ASTM A193 GR. B8M
ASTM A194 GR. 8M
ASTM A193 GR. B8M
COMMERCIAL
COMMERCIAL
1.97
2.47
2.47
3.53
3.53
4.46
4.46
5.43
5.39
7.37
7.20
(4x)
4" CLASS 300 HP LUG SHOWN
2.5" ‐ 8" 150/300LB LUG WITH GEAR
HANDWHEEL TOP WORKS
VALVE DIMENSIONS
STEM CONNECTION
CORE DIMS
"J" ØSTEM "K" SQUARE "L" LENGTH "L2" "M" LENGTH "N" KEYWAY ØQ1 ØQ2
VALVE SIZE "A" HEIGHT "A1" HEIGHT "B" HEIGHT "C" B.C "D" TAP # OF HOLES "E" FACE "F" "G" DIA
"H" B.C
2.5" 150 LUG
5.59
7.40
12.72
5.50
5/8‐11
4
1.88
6.37
6
3.25
0.62
0.46
1.02
N/A
1.64
N/A
1.72 1.97
2.5" 300 LUG
5.59
7.40
13.59
5.88
3/4‐10
8
1.88
6.37
6
3.25
0.62
0.46
1.02
N/A
1.64
N/A
1.72 1.97
3" 150 LUG
5.59
7.40
12.72
6.00
5/8‐11
4
1.88
6.37
6
3.25
0.62
0.46
1.02
N/A
1.72
N/A
2.28 2.47
3" 300 LUG
5.59
7.40
13.45
6.63
3/4‐10
8
1.88
6.37
6
3.25
0.62
0.46
1.02
N/A
1.72
N/A
2.28 2.47
4" 150 LUG
6.25
8.06
14.25
7.50
5/8‐11
8
2.13
6.37
6
3.25
0.62
0.46
1.02
N/A
1.56
N/A
3.06 3.53
4" 300 LUG
6.25
8.06
14.53
7.88
3/4‐10
8
2.13
6.37
6
3.25
0.62
0.46
1.02
N/A
1.56
N/A
3.06 3.53
5" 150 LUG
7.69
10.30
18.70
8.50
3/4‐10
8
2.13
6.02
9
4.25
0.87
0.64
1.04
N/A
1.69
N/A
4.35 4.46
5" 300 LUG
7.69
10.30
18.70
9.25
3/4‐10
8
2.13
6.02
9
4.25
0.87
0.64
1.04
N/A
1.69
N/A
4.35 4.46
6" 150 LUG
7.69
10.30
18.70
9.50
3/4‐10
8
2.25
6.02
9
4.25
0.87
0.64
1.04
N/A
1.69
N/A
5.33 5.43
6' 300 LUG
7.69
10.30
19.73
10.63 3/4‐10
12
2.31
6.02
9
4.25
0.87
0.64
1.04
N/A
1.69
N/A
5.33 5.39
8" 150 LUG
9.51
12.01
21.67
11.75 3/4‐10
8
2.63
7.93
12
4.75
1.12
N/A
N/A
1.50
1.86
0.25
7.10 7.37
8" 300 LUG
9.51
12.01
21.67
13.00
7/8‐9
12
2.88
7.93
12
4.75
1.12
N/A
N/A
1.50
1.86
0.25
7.10 7.20
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change
design, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see the
Technical/Service Information section on our website. For the most current information access www.milwaukeevalve.com
HP-3
MILWAUKEE VALVE
Bolt Ø
0.27
0.27
0.27
0.27
0.27
0.27
0.44
0.44
0.44
0.44
0.56
0.56
Rev. 3
HP Series Lug 10”- 24” with Gear
Class 150 and 300
ITEM NO. PARTS NAME
1
BODY
3
STEM & DISC ASSEMBLY
2B. DISC
2C. STEM
2D. TAPER PIN
STEM RETAINER
4
SEAT RETAINER RING
5
SOCKET HEAD CAP SCREW
6
SEAT
7
8
9
10
11
12
13
SEAT SPRING
DISC SPACER
BEARING
BOTTOM CAP
BOTTOM SEAL
HEX HEAD CAP SCREW
SPLIT LOCKWASHER
14
PACKING V-RING SET
2
PACKING WASHER
15
GLAND FOLLOWER
16
GLAND RETAINER
17
STUD
18
HEAVY HEX NUT
19
MOUNTING PLATE
20
HEX HEAD CAP SCREW
21
SPLIT LOCKWASHER
22
HEX HEAD CAP SCREW
23
SPLIT LOCKWASHER
24 WORKS
TOP
GEAR OPERATOR
25
2.5" - 8" 150/300 LUG WITH GEAR
VALVE DIMENSIONS
HT "C" B.C "D" TAP # OF HOLES "E" FACE
5.50
5/8-11
4
1.88
5.88
3/4-10
8
1.88
6.00
5/8-11
4
1.88
6.63
3/4-10
8
1.88
7.50
5/8-11
8
2.13
7.88
3/4-10
8
2.13
8.50
3/4-10
8
2.13
9.25
3/4-10
8
2.13
9.50
3/4-10
8
2.25
10.63 3/4-10
12
2.31
11.75 3/4-10
8
2.63
13.00
7/8-9
12
2.88
"F"
6.37
6.37
6.37
6.37
6.37
6.37
6.02
6.02
6.02
6.02
7.93
7.93
HANDWHEEL
"G" DIA
6
6
6
6
6
6
9
9
9
9
12
12
10" - 16" 150 & 300 18" - 24" 150 LUG WGEAR
MATERIAL
A. CARBON STEEL
B. STAINLESS STEEL
"H" B.C
3.25
3.25
3.25
3.25
3.25
3.25
4.25
4.25
4.25
4.25
4.75
4.75
SPECIFICATION
ASTM A216 GR. WCB
ASTMA351 GR. CF8M
STAINLESS STEEL
STAINLESS STEEL
18-8 STAINLESS STEEL
304 STAINLESS STEEL
A. CARBON STEEL
B. STAINLESS STEEL
STAINLESS STEEL
A. PTFE COMMERCIAL
B. 15% GLS. FLD. PTFE
C. UHMWPE
STAINLESS STEEL
316 STAINLESS STEEL
STAINLESS STEEL - PTFE COATED
STAINLESS STEEL
GRAPHITE
STAINLESS STEEL
STAINLESS STEEL
A. PTFE COMMERCIAL
B. GRAPHITE
304 STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STEM CONNECTION
-
"J" ØSTEM "K" SQUARE "L" LENGTH "M" LENGTH
0.62
0.46
1.02
1.64
0.62
0.46
1.02
1.64
0.62
0.46
1.02
1.72
0.62
0.46
1.02
1.72
0.62
0.46
1.02
1.56
0.62
0.46
1.02
1.56
0.87
0.64
1.04
1.69
0.87
0.64
1.04
1.69
0.87
0.64
1.04
1.69
0.87
0.64
1.04
1.69
1.12
N/A
N/A
1.86
1.12
N/A
N/A
1.86
"N"
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.25
0.25
ASTM A351 GR. CF8M
17-4PH H1150
COMMERCIAL
COMMERCIAL
ASTM A515 GR. 70
ASTM A240 TY.316
ASTM A193 GR. B8M
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
ASTM A351 GR. CF8M
COMMERCIAL
ASTM A193, GR. B8M
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
ASTM A351 GR. CF8M
ASTM A351 GR. CF8M
ASTM A193 GR. B8M
ASTM A194 GR. 8M
COMMERCIAL
ASTM A193, GR. B8M
COMMERCIAL
ASTM A193, GR. B8M
COMDIMS
MERCIAL
CORE
-
ØQ1
1.72
1.72
2.28
2.28
3.06
3.06
4.53
4.53
5.33
5.33
7.10
7.10
ØQ2
1.97
1.97
2.47
2.47
3.53
3.53
4.46
4.46
5.43
5.39
7.37
7.20
(4x)
10" CLASS 300 LUG SHOWN
VALVE SIZE
10"‐ 150 LUG
10"‐ 300 LUG
12"‐ 150 LUG
12"‐ 300 LUG
14"‐ 150 LUG
14"‐ 300 LUG
16"‐ 150 LUG
16"‐ 300 LUG
18"‐ 150 LUG
20"‐ 150 LUG
24"‐ 150 LUG
VALVE DIMENSIONS
"A" HEIGHT "A1" HEIGHT "B" HEIGHT "C" B.C "D" TAP
10.54
13.04
23.15
14.25
7/8‐9
10.81
16.86
28.40
15.25 1‐1/8‐8
11.62
17.67
30.40
17.00
7/8‐9
11.62
17.98
31.18
17.75 1‐1/8‐8
12.00
18.36
31.74
18.75 1‐1/8‐8
13.50
19.61
35.12
20.25 1‐1/8‐8
14.00
20.11
35.96
21.25 1‐1/8‐8
15.00
21.09
38.12
22.50 1‐1/4‐8
15.00
21.09
38.12
22.75 1‐1/8‐8
17.00
24.19
40.03
25.00 1‐1/8‐8
19.50
25.69
49.30
29.50 1‐1/4‐8
10" ‐ 16" 150 & 300 18" ‐ 24" 150 LUG WGEAR
HANDWHEEL TOP WORKS
# OF HOLES "E" FACE
"F"
"G" DIA
"H" B.C
12
2.81
7.93
12
4.75
16
3.25
7.85
12
4.37
12
3.19
7.85
12
4.37
16
3.63
8.63
12
4.92
12
3.63
8.36
12
4.92
20
4.63
10.96
20
6.27
16
4.00
10.96
20
6.27
20
5.25
11.95
20
6.27
16
4.47
11.95
20
6.27
20
5.00
16.54
16
6.27
20
6.06
16.54
16
7.21
STEM CONNECTION
"J" ØSTEM "L2" LENGTH "M" LENGTH
1.12
1.50
1.81
1.37
1.50
5.51
1.37
1.50
5.51
1.50
1.50
5.88
1.50
1.50
5.50
2.00
2.38
6.02
2.00
2.38
6.02
2.25
2.38
6.02
2.25
2.38
6.02
2.50
2.38
6.48
3.00
2.50
6.52
"N"
0.25
0.31
0.31
0.38
0.38
0.50
0.50
0.50
0.50
0.63
0.75
CORE DIMS
ØQ1
ØQ2
9.30
9.16
10.36
10.25
11.69
11.39
13.65
13.26
15.65
17.57
20.38
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change
design, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see the
Technical/Service Information section on our website. For the most current information access www.milwaukeevalve.com
HP-4
MILWAUKEE VALVE
9.38
9.25
10.48
10.34
11.76
11.49
13.72
13.36
15.72
17.64
20.46
Bolt Ø
0.56
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
3/4" ‐ 10"
Rev. 3
HP Series Wafer 2 1/2” - 8” with Lever
2 1/2 " - 8" 150/300 LB Wafer With Handle
ITEM No.
PARTS NAME
1 150 WAFER BODY
SPECIFICATION
MATERIAL
A. CARBON STEEL
ASTM A216 GR. WCB
B. STAINLESS STEEL
ASTM A351 GR. CF8M
2 MACHINED DISC
STAINLESS STEEL
ASTM A351 GR. CF8M
3 STEM
STAINLESS STEEL
17-4 PH COND. H1150
4 TAPER PIN
5 SEAT RETAINER RING
COMMERCIAL
18-8 STAINLESS STEEL
A. CARBON STEEL
ASTM A515 GR. 70
B. STAINLESS STEEL
ASTM A240 TY.316
A. PTFE COMMERCIAL
6 SEAT
COMMERCIAL
B. 15% GLASS FILLED TEFLON
COMMERCIAL
C. UHMWPE
COMMERCIAL
7 BOTTOM CAP
STAINLESS STEEL
8 STEM RETAINER
304 STAINLESS STEEL
9 GLAND FOLLOWER
STAINLESS STEEL
ASTM A351 GR. CF8M
10 GLAND RETAINER
STAINLESS STEEL
ASTM A351 GR. CF8M
11 DISC SPACER
316 STAINLESS STEEL
COMMERCIAL
12 MALE ADAPTER
PTFE
COMMERCIAL
13 V-RING
PTFE
COMMERCIAL
14 FEMALE ADAPTER
PTFE
COMMERCIAL
15 PACKING WASHER
304 STAINLESS STEEL
COMMERCIAL
16 O-RING
VITON
COMMERCIAL
17 BEARING
STAINLESS STEEL - PTFE LINED
COMMERCIAL
18 SEAT SPRING
STAINLESS STEEL
COMMERCIAL
19 SOCKET HEAD CAP SCREW
STAINLESS STEEL
ASTM A193 GR B8M
ASTM A351 GR. CF8M
COMMERCIAL
20 WASHER, SPLIT
STAINLESS STEEL
COMMERCIAL
21 HEX HEAD CAP SCREW
STAINLESS STEEL
ASTM 193 GR. B8M
22 STUD
STAINLESS STEEL
ASTM A193 GR. B8M
23 HEAVY HEX NUT
STAINLESS STEEL
ASTM A194 GR. 8M
24 HPBV NAMEPLATE MILWAUKEE
ALUMINUM
COMMERCIAL
25 DRIVE SCREW, TY. U, #2x.25
STAINLESS STEEL, TY. 18-8
COMMERCIAL
26 4" HANDLE
DUCTILE IRON
COMMERCIAL
27 HANDLE PIPE
CARBON STEEL
COMMERCIAL
28 GRIP
VINYL
COMMERCIAL
29 ROLL PIN
STAINLESS STEEL
COMMERCIAL
30 E-CLIP
STAINLESS STEEL
COMMERCIAL
31 SPRING
STAINLESS STEEL
COMMERCIAL
32 LOCK KNOB
STAINLESS STEEL
COMMERCIAL
33 SOCKET SET SCREW
STAINLESS STEEL
COMMERCIAL
34 NOTCH PLATE
STAINLESS STEEL
COMMERCIAL
35 HEX HEAD CAP SCREW
CARBON STEEL - ZINC PLATED
COMMERCIAL
36 STD. HEX NUT
STAINLESS STEEL
COMMERCIAL
37 1/4" LOCKWASHER
STAINLESS STEEL
COMMERCIAL
(4x)
2.5" ‐ 6" 150/300LB & 8" 150LB WAFER WITH LEVER
VALVE DIMENSIONS
VALVE SIZE
"A" HEIGHT "B" HEIGHT "C" B.C "E" FACE
5.59
11.99
5.50
1.88
2.5" 150/300 WAFER
5.59
11.24
6.00
1.88
3" 150/300 WAFER
6.25
12.77
7.50
2.13
4" 150/300 WAFER
7.69
15.65
8.50
2.13
5" 150 WAFER
7.69
15.65
9.25
2.13
5" 300 WAFER
7.69
15.51
9.50
2.25
6" 150 WAFER
7.69
15.32
9.50
2.25
6' 300 WAFER
9.51
19.27
11.75
2.63
8" 150 WAFER
"F" 16.87
16.87
16.87
19.87
19.87
19.87
19.87
22.85
STEM CONNECTION
TOP WORKS
"J" ØSTEM "K" SQUARE "L" LENGTH "L2" "M" LENGTH
"H" B.C
3.25
0.62
0.46
1.02
N/A
1.64
3.25
0.62
0.46
1.02
N/A
1.72
3.25
0.62
0.46
1.02
N/A
1.56
4.25
0.87
0.64
1.04
N/A
1.69
4.25
0.87
0.64
1.04
N/A
1.69
4.25
0.87
0.64
1.04
N/A
1.69
4.25
0.87
0.64
1.04
N/A
1.69
4.75
1.12
N/A
N/A
1.50
1.86
"N"
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.25
CORE DIMS
ØQ1 ØQ2
1.72 1.97
2.28 2.47
3.06 3.53
4.35 4.47
4.35 4.47
5.33 5.43
5.33 5.43
7.10 7.37
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change
design, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see the
Technical/Service Information section on our website. For the most current information access www.milwaukeevalve.com
HP-5
MILWAUKEE VALVE
Bolt Ø
0.27
0.27
0.27
0.44
0.44
0.44
0.44
0.56
Rev. 3
HP Series Wafer 2 1/2” - 8” with Gear
Class 150 and 300
ITEM NO. PARTS NAME
1
BODY
STEM & DISC ASSEMBLY
2B. DISC
2C. STEM
2D. TAPER PIN
STEM RETAINER
2-1/2" - 8" 150/300 LB WAFER WITH GEAR
MATERIAL
A. CARBON STEEL
B. STAINLESS STEEL
SPECIFICATION
ASTM A216 GR. WCB
ASTM A351 GR. CF8M
STAINLESS STEEL
STAINLESS STEEL
18-8 STAINLESS STEEL
304 STAINLESS STEEL
3
A. CARBON STEEL
4
SEAT RETAINER RING
B. STAINLESS STEEL
STAINLESS STEEL
5
SOCKET HEAD CAP SCREW
A. PTFE COMMERCIAL
6
SEAT
B. 15% GLS. FLD. PTFE
C. UHMWPE
SEAT SPRING
STAINLESS STEEL
7
DISC SPACER
316 STAINLESS STEEL
8
BEARING
STAINLESS STEEL - PTFE COATED
9
BOTTOM CAP
STAINLESS STEEL
10
GRAPHITE
BOTTOM SEAL
11
HEX HEAD CAP SCREW
STAINLESS STEEL
12
SPLIT LOCKWASHER
STAINLESS STEEL
13
A. PTFE COMMERCIAL
14
PACKING V-RING SET
B. GRAPHITE
PACKING WASHER
304 STAINLESS STEEL
15
GLAND FOLLOWER
STAINLESS STEEL
16
GLAND RETAINER
STAINLESS STEEL
17
STUD
STAINLESS STEEL
18
HEAVY HEX NUT
STAINLESS STEEL
19
SOCKET HEAD CAP SCREW
STAINLESS STEEL
20
2.5" - 8" 150/300 LUG WITH GEAR
SPLIT LOCKWASHER
STAINLESS STEEL
21
HANDWHEEL TOP WORKS
MOUNTSTEM
ING PLCONNECTION
ATE
STAINLECORE
SS STEDIMS
EL
22
"J" ØSTEM
ØQ1
ØQ2
HOLES "E" FACE "F"
"G" DIA
"H" B.C
"K"
SQUARE
"L"
LENGTH
"M"
LENGTH
"N"
GEAR OPERATOR
23
4
8
4
8
8
8
8
8
8
12
8
12
2
1.88
1.88
1.88
1.88
2.13
2.13
2.13
2.13
2.25
2.31
2.63
2.88
6.37
6.37
6.37
6.37
6.37
6.37
6.02
6.02
6.02
6.02
7.93
7.93
6
6
6
6
6
6
9
9
9
9
12
12
3.25
3.25
3.25
3.25
3.25
3.25
4.25
4.25
4.25
4.25
4.75
4.75
0.62
0.62
0.62
0.62
0.62
0.62
0.87
0.87
0.87
0.87
1.12
1.12
0.46
0.46
0.46
0.46
0.46
0.46
0.64
0.64
0.64
0.64
N/A
N/A
1.02
1.64
1.02
1.64
1.02
1.72
1.02
1.72
1.02
1.56
1.02
1.56
1.04
1.69
1.04
1.69
1.04
1.69
1.04
1.69
N/ADETAIL1.86
KEY
N/A
1.86
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.25
0.25
1.72
1.72
2.28
2.28
3.06
3.06
4.53
4.53
5.33
5.33
7.10
7.10
1.97
1.97
2.47
2.47
3.53
3.53
4.46
4.46
5.43
5.39
7.37
7.20
ASTM A351 GR. CF8M
17-4PH H1150
COMMERCIAL
COMMERCIAL
ASTM A515 GR. 70
ASTM A240 TY.316
ASTM A193 GR. B8M
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
ASTM A351 GR. CF8M
COMMERCIAL
ASTM A193, GR. B8M
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
ASTM A351 GR. CF8M
ASTM A351 GR. CF8M
ASTM A193 GR. B8M
ASTM A194 GR. 8M
ASTM A193 GR. B8M
COMMERCIAL
COMMERCIAL
-
(4x)
3" CLASS 150/300 HP WAFER SHOWN
2.5" ‐ 8" 150/300LB WAFER WITH GEAR
VALVE SIZE
2.5" 150/300 WAFER
3" 150/300 WAFER
4" 150/300 WAFER
5" 150 WAFER
5" 300 WAFER
6" 150 WAFER
6" 300 WAFER
8" 150 WAFER
8" 300 WAFER
HANDWHEEL TOP WORKS
VALVE DIMENSIONS
STEM CONNECTION
"J" ØSTEM "K" SQUARE "L" LENGTH
"A" HEIGHT "B" HEIGHT "C" B.C "E" FACE "F"
"G" DIA
"H" B.C
"L2"
5.59
13.57
5.50
1.88
6.37
6
3.25
0.62
0.46
1.02
N/A
5.59
12.72
6.00
1.88
6.37
6
3.25
0.62
0.46
1.02
N/A
6.25
14.25
7.50
2.13
6.37
6
3.25
0.62
0.46
1.02
N/A
7.69
18.83
8.50
2.13
6.02
9
4.25
0.87
0.64
1.04
N/A
7.69
16.94
9.25
2.13
6.52
9
4.25
0.87
0.64
1.04
N/A
7.69
18.69
9.50
2.25
6.02
9
4.25
0.87
0.64
1.04
N/A
7.69
18.50
9.50
2.25
6.02
9
4.25
0.87
0.64
1.04
N/A
9.51
21.67
11.75
2.63
7.93
12
4.75
1.12
N/A
N/A
1.50
9.51
21.67
13.00
2.88
7.93
12
4.75
1.12
N/A
N/A
1.50
"M" LENGTH
1.64
1.72
1.56
1.70
1.70
1.70
1.67
1.86
1.86
"N"
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.25
0.25
CORE DIMS
ØQ1
ØQ2
1.72
1.97
2.28
2.47
3.06
3.53
4.35
4.47
4.35
4.47
5.33
5.43
5.33
5.43
7.10
7.37
7.10
7.20
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change
design, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see the
Technical/Service Information section on our website. For the most current information access www.milwaukeevalve.com
HP-6
MILWAUKEE VALVE
Bolt Ø
0.27
0.27
0.27
0.44
0.44
0.44
0.44
0.44
0.56
Rev. 2
HP Series Wafer 10”- 18” with Gear
Class 150 and 300
10" THRU 18" 150/300 LB WAFER WITH GEAR
MATERIAL
A. CARBON STEEL
B. STAINLESS STEEL
ITEM NO. PARTS NAME
1
3
STEM & DISC ASSEMBLY
2B. DISC
2C. STEM
2D. TAPER PIN
STEM RETAINER
4
SEAT RETAINER RING
5
SOCKET HEAD CAP SCREW
6
SEAT
7
8
9
10
11
12
13
SEAT SPRING
DISC SPACER
BEARING
BOTTOM CAP
BOTTOM SEAL
HEX HEAD CAP SCREW
SPLIT LOCKWASHER
14
PACKING V-RING SET
2
VALVE DIMENSIONS
HT "C" B.C "D" TAP # OF HOLES
5.50
5/8-11
4
5.88
3/4-10
8
6.00
5/8-11
4
6.63
3/4-10
8
7.50
5/8-11
8
7.88
3/4-10
8
8.50
3/4-10
8
9.25
3/4-10
8
9.50
3/4-10
8
10.63 3/4-10
12
11.75 3/4-10
8
13.00
7/8-9
12
BODY
PACKING WASHER
15
GLAND FOLLOWER
16
GLAND RETAINER
17
STUD
18
HEAVY HEX NUT
19
SOCKET
HEAD CAP SCREW
2.5" - 8" 150/300 LUG20WITH
GEAR
SPLIWORKS
T LOCKWASHER
21 TOP
HANDWHEEL
MOUNTING PLATE
22
"J" ØSTEM
"E" FACE "F"
"G" DIA 23
"H" B.C
GEAR OPERATOR
1.88
1.88
1.88
1.88
2.13
2.13
2.13
2.13
2.25
2.31
2.63
2.88
6.37
6.37
6.37
6.37
6.37
6.37
6.02
6.02
6.02
6.02
7.93
7.93
6
6
6
6
6
6
9
9
9
9
12
12
3.25
3.25
3.25
3.25
3.25
3.25
4.25
4.25
4.25
4.25
4.75
4.75
0.62
0.62
0.62
0.62
0.62
0.62
0.87
0.87
0.87
0.87
1.12
1.12
SPECIFICATION
ASTM A216 GR. WCB
ASTM A351 GR. CF8M
STAINLESS STEEL
STAINLESS STEEL
18-8 STAINLESS STEEL
304 STAINLESS STEEL
A. CARBON STEEL
B. STAINLESS STEEL
STAINLESS STEEL
A. PTFE COMMERCIAL
B. 15% GLS. FLD. PTFE
C. UHMWPE
STAINLESS STEEL
316 STAINLESS STEEL
STAINLESS STEEL - PTFE COATED
STAINLESS STEEL
GRAPHITE
STAINLESS STEEL
STAINLESS STEEL
A. PTFE COMMERCIAL
B. GRAPHITE
304 STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STEM CONNECTION
STAINLESS STEEL
"K" SQUARE "L" LENGTH "M"
LENGTH
-
0.46
0.46
0.46
0.46
0.46
0.46
0.64
0.64
0.64
0.64
N/A
N/A
1.02
1.02
1.02
1.02
1.02
1.02
1.04
1.04
1.04
1.04
N/A
N/A
1.64
1.64
1.72
1.72
1.56
1.56
1.69
1.69
1.69
1.69
1.86
1.86
ASTM A351 GR. CF8M
17-4PH H1150
COMMERCIAL
COMMERCIAL
ASTM A515 GR. 70
ASTM A240 TY.316
ASTM A193 GR. B8M
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
ASTM A351 GR. CF8M
COMMERCIAL
ASTM A193, GR. B8M
COMMERCIAL
COMMERCIAL
COMMERCIAL
COMMERCIAL
ASTM A351 GR. CF8M
ASTM A351 GR. CF8M
ASTM A193 GR. B8M
ASTM A194 GR. 8M
ASTM A193 GR. B8M
COMMDIMS
ERCIAL
CORE
COMMERCIAL
"N" ØQ1 -ØQ2
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.25
0.25
1.72
1.72
2.28
2.28
3.06
3.06
4.53
4.53
5.33
5.33
7.10
7.10
1.97
1.97
2.47
2.47
3.53
3.53
4.46
4.46
5.43
5.39
7.37
7.20
(4x)
10"‐16" 150‐300 AND 18" 150 WAFER WITH GEAR
VALVE SIZE
"A" HEIGHT
10"‐ 150 WAFER
8.34
10"‐ 300 WAFER
10.81
12"‐ 150 WAFER
11.62
12"‐ 300 WAFER
11.59
14"‐ 150 WAFER
12.00
14"‐ 300 WAFER
13.50
16"‐ 150 WAFER
14.00
16"‐ 300 WAFER
15.00
18"‐ 150 WAFER
15.00
VALVE DIMENSIONS
STEM CONNECTION
HANDWHEEL TOP WORKS
"J" ØSTEM "L2" "M" LENGTH
"A1" HEIGHT "B" HEIGHT "C" B.C "E" FACE "F"
"G" DIA
"H" B.C
14.29
22.06
14.25
2.81
7.93
12
4.11
1.12
1.50
3.72
16.86
28.40
15.25
3.25
7.85
12
4.37
1.37
1.50
5.51
17.67
29.27
17.00
3.19
7.85
12
4.37
1.37
1.50
5.51
17.64
31.18
17.75
3.63
8.36
12
4.92
1.50
1.50
5.92
18.36
31.74
18.75
3.63
8.36
12
4.92
1.50
1.50
5.50
19.61
35.12
20.25
4.63
10.96
20
6.27
2.00
2.38
6.02
20.11
35.96
21.25
4.00
10.96
20
6.27
2.00
2.38
6.02
21.09
38.12
22.50
5.25
11.95
20
6.27
2.25
2.38
6.02
21.09
37.74
22.75
4.50
11.95
20
6.27
2.25
2.38
6.02
"N"
0.25
0.31
0.31
0.38
0.38
0.50
0.50
0.50
0.50
CORE DIMS
ØQ1 ØQ2
9.30 9.38
9.16 9.25
10.36 10.48
10.25 10.34
11.68 11.76
11.39 11.49
13.65 13.72
13.26 13.33
15.63 15.71
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change
design, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see the
Technical/Service Information section on our website. For the most current information access www.milwaukeevalve.com
HP-7
MILWAUKEE VALVE
Bolt Ø
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
1/2" ‐ 13"
Rev. 3