1-0103-EN
Fittings and Accessories
for Centralized Lubrication Systems and General Use
This brochure provides an overview of metalic pipe unions for fluid engineering.
This brochure is divided into the sections
• Solderless pipe unions with tapered sleeve acc. to DIN 3862
• SKF Quick Connectors
• Solderless pipe unions with cutting sleeve acc. to DIN EN ISO 8434-1 and DIN 2353
• Other accessories
Contents
Solderless pipe union with
tapered sleeve acc. to DIN 3862 . . . . . . . . . . . . . . . . . . . . 4–18
Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7
Banjo fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 18
Bracketed connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Bulkhead connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 10
Counterbores . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Cross joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Distributor manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 –16
Double tapered sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9
Elbow connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Flat washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Form counterbores . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Reducing adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Reinforcing sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Screw plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Socket unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Tapered sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Tee connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Threaded sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Tube-to-tube-connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Vent plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SKF Quick Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 –21
Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Banjo fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Check valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Claw groove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21
Locking pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Tube cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29–44
Banjo fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Check valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Coupling plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Filler coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Fixing bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Fixing clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
High pressure hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35
Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Hoses suitable for self-installation . . . . . . . . . . . . . . . . . . . . . . 34
Lock washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Oil level gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Oil reservoirs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43
Plastic tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Pressure gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Quick-disconnect couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Relief valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Rotating joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Safety valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 41
Shut-off valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Steel tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Topping-up pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Tube bending device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1-0103-EN
Solderless pipe union with
cutting sleeve acc. to DIN EN ISO 8434-1/ DIN 2353 . . . . 22 – 28
Banjo fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cone plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connectors for pressure gauges . . . . . . . . . . . . . . . . . . . . . 25, 27
Cutting sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Elbow bulkhead connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Elbow connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Elbow screw-in connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Four-way connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
L-screw-in connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Reducing connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 28
Reducing connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Screw plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Straight bulkhead connectors . . . . . . . . . . . . . . . . . . . . . . . 23, 27
Straight connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Straight screw-in fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Straight screw-in connectors . . . . . . . . . . . . . . . . . . . . . . . 23, 27
Straight screw-in glands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Tee connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 27
Tee screw-in connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Union nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Vent plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Counterbores
2.5
4
6
8
10
12
d10
d8
b3
t3
t4
r
2.5
4
6
8
10
12
1.5
3
4.5
6.5
8.5
10.5
M6×0.75
M8 ×1
M10×1
M14 ×1.5
M16 ×1.5
M18 ×1.5
4.5
6.5
7
9
9
9.5
5.5
8.5
9
11.5
11.5
12
8.5
12.5
14
18.5
19.5
22
1.3
1.6
1.6
1.6
1.6
1.6
R
t4
1102
1404
1406
1408
1410
1412
1)
d9B11
b3
f.tube
Specification
of counterbores diam.
t3
90°
d8
DIN 3854/DIN 3862 – for solderless tube connection
d9
d10
1
) not shown in DIN standard
Form counterbores
to tap ports for solderless tube connection
902-111
904-411
906-411
908-411
910-411
912-411
tube
diam.
d1
1102
1404
1406
1408
1410
1412
10
10
12
16
18
20
60.5
65
66
70
72
75
d2
d10
d4
10
1.5
3
4.5
6.5
8.5
10.5
5
6.5
8.5
12
14
16
Twist drill
t2
t3
4.5
7.5
8
10.5
10.5
11
d2
5.5
8.5
9
11.5
11.5
12
l
2.5
4
6
8
10
12
for counterbore
l
25
orm counterbore
Order No.
d1
Provision of counterbore
d4
predrill holes
bore hole
to be tapped
t3
t2
d10
counterbore with
form counterbore
up to the stop
Important note #3:
When using a hand drill, take care not to tilt
the counterbore out of the drill axis. To avoid
damages drill steadily without interruption.
Increase pressure slightly at the stop.
1-0103-EN
Form counterbore enlarges bore hole diam. d4 to core hole for ISO thread.
4
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Connectors for steel and copper tubing
Double tapered sleeves – DIN 3862
Order No.
for tube diam. d
)
402-001 *
404-001
406-001
408-001
410-001
412-001
double
tap. sleeve
Installation (steel and copper tubing)
1. Push socket union and double tapered
sleeve onto tube end.
2. Insert tube end into tapped port up to
the stop
3. First tighten socket union finger-tight by
hand. Then turn another 11/2 turns.
brass
Socket unions – DIN 3871
Order No
for tube diam.
402-002 *)
404-002
406-002
408-202
410-002
412-002
2.5
4
6
8
10
12
d1
l1
l2
WAF
M6 ×0.75
M8 ×1
M10 ×1
M14 ×1.5
M16 ×1.5
M18 ×1.5
9
12
13
16
17
18
3
4
4
4.5
5.5
6
F05
7
8
10
14
17
19
[!
tapped
port
2.5
4
6
8
10
12
d
[
socket
union
Material
S
Material: steel, galvanized surface
*) not shown in DIN standard
Connectors for steel, copper and plastic tubing
l1
402-603
404-603
406-603
406-613
408-603
410-603
412-603
8
10
12
12
15
18
20
2.5× 0.5
4× 0.85
6× 1
6× 1.25
8× 1.25
10× 1.5
12× 1.5
1.4
2.2
3.9
3.4
5.4
6.9
8.9
2.3
3.8
5.8
5.8
7.8
9.8
11.8
d3
l1
Reinforcing sockets (if plastic tubing is used)
Order No.
for tube
d2
d3
Material: brass
tapered sleeve
reinforcing
socket
d
402-611
404-611
406-611
408-611
410-611
412-611
2.5
4
6
8
10
12
1-0103-EN
Socket unions – DIN 3871
Order No.
for tube diam.
Installation (plastic tubing)
1. Insert reinforcing socket into
plastic tube.
2. Push socket union and tapered
sleeve onto tube end.
3. Insert tube end into counterbored
port up to the stop.
4. First tighten socket union finger-tight
by hand. Then turn another 11/2 turns.
Material
402-612
404-612
404-612-MS
406-612
406-612-MS
408-612
408-612-MS
410-612
410-612-MS
412-612
*)
*)
*)
*)
2.5
4
4
6
6
8
8
10
10
12
brass
d1
l1
l2
M6 ×0.75
M8×1
M8 ×1
M10 ×1
M10 ×1
M14 ×1.5
M14×1.5
M16×1.5
M16 ×1.5
M18 ×1.5
9
12
12
13
13
16
16
17
17
18
3
4
4
4
4
4.5
4.5
5.5
5.5
6
WAF
7
8
8
10
10
14
14
17
17
19
F05
[!
socket
union
tapped port
d2
Tapered sleeves – DIN 3862
Order No.
for tube diam. d
[
reinforcing
socket
S
Material: steel, galvanized surface, *) brass
5
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Adaptors
with cylindrical thread (sealed by flat washer to DIN 7603)
404-004
404-005
404-061
404-063
404-003
404-006
404-040
404-162
404-164
406-158
406-004
406-162
406-054
301-005
406-166
406-055
408-004
408-154
408-160
408-162
301-020
301-001
408-005
408-006
408-022
410-160
410-162
410-163
410-164
410-169
410-004
410-018
410-171
410-022
412-162
412-163
412-164
412-169
412-004
412-014
d1
2.5
M3
M4
M5
M6
M6×0.75
M8×1
4
M8×1
M8×1
M5
M8
M8×1
M10×1
G 1/8 A
M12×1
M14×1.5
6
M8×1
M10×1
M12×1
G 1/4 A
M14×1.5
M16×1.5
G 3/8 A
8
M10×1
G 1/8 A
G 1/4 A
M12×1
G 1/4 A
M14×1.5
M16×1.5
M18×1.5
M22×1.5
10
M10×1
M12×1
G 1/4 A
M14×1.5
G 1/4 A
M16×1.5
M18×1.5
G 1/2 A
M22×1.5
12
M12×1
G 1/4 A
M14×1.5
G 1/4 A
M18×1.5
M22×1.5
d2 *)
l1
l2
WAF
M6×0.75
22
22
22
13
13
15
8.5
8.5
8.5
5.5
5.5
7.5
7
7
7
9
9
11
M8×1
24
32
20
22
18
18
18
18
18
14
22
5.5
8
7.5
7.5
8
9
9
11
11
11
11
11
14
14
17
17
M10×1
23
18
19
20
18
19
21
7.5
7.5
9
10
9
9
10
14
14
17
17
17
19
22
M14×1.5
28
29
30
29
23
26
22
22
24
7.5
8
16
9
10
9
9
10
12
17
17
17
17
17
17
19
22
27
M16×1.5
30
31
30
29
52
23
24
24
24
7.5
9
10
9
16
9
10
12
12
19
19
19
19
19
19
22
27
27
M18×1.5
35
35
33
41
24
26
9
10
9
16
10
12
22
22
22
22
22
27
S!
F05
[!
843-130-024
843-130-025
843-130-026
402-004
402-003
402-006
Tube diam.
[
Order No.
S
Order No
d2
l1
l2
WAF
301-134
Tube diam.
4
M10×1
d1
G 1/4
23
7.5
17
301-034
5.5
M14×1.5
G 1/4
22
9
17
M10×1
24
19
20
19
21
8
9
9
9
10
14
17
17
19
22
M14×1.5
29
28
30
24
7.5
9
10
12
17
17
17
27
1
267-001.17
406-163
D301-005-MS
406-167
267-001.19
6
G /8 A
M12×1
M14×1.5
M16×1.5
M18×1.5
D408-004-MS
D301-001-MS
D301-020-MS
267-001.13
8
M10×1
M14×1.5
G 1/4 A
G 1/2 A
Material: brass
6
1-0103-EN
Material: steel, galvanized surface
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Reducing adapters
with cylindrical thread (sealed by flat washer to DIN 7603)
Order No.
d1
d2
l1
l2
WAF
843-130-021 1)
843-130-022 1)
843-130-023 1)
M3
M4
M5
M5
M5
M5
22
22
22
10
10
10
3
3
3
steel, galvanized surface
406-024
401-016-312
M10×1
M10×1
G 1/8
G 1/4
20
26.5
8
7.5
14
17
brass, galvanized surface
brass
406-044-S1
P-78.01
401-013-161
401-019-352
M10×1 tap.
M12×1
G 1/4 A
M14×1.5
G
G
G
G
1
22.5
27
40
20
8
8.5
12
9
17
19
27
17
steel, galvanized surface
steel, galvanized surface
steel, galvanized surface
brass
401-016-371
243-001.10
M16×1.5
M16×1.5
G 1/4
G 1/2
30
31
12
9
19
27
steel, galvanized surface
267-001.47
267-001.60
G 3/8 A
G 3/8 A
G 1/4
G 1/2
31
34
10
22
27
brass
267-001.36
243-001.20
M18×1.5
M18×1.5
G 3/8
G 1/2
32
10
22
27
steel, galvanized surface
44-1755-2029
M20×1.5
G 1/4
28
12
24
steel, galvanized surface
1
G 1/2 A
G
G
G
G
G
/8
1
/4
1
/2
3
/8
3
/4
24
24
40.5
31
40
12
27
27
27
27
36
brass
G
G
G
G
1
1 1/4
1
/2
1
/2
49
53
41
29
14
14
16
18
401-011-132
433-890-131
401-013-171
401-013-111
G
G
G
G
1
/2 A
/2 A
/4 A
1A
1
3
l1
l2
d1
WAF
d2
l1
1
WAF
l2
401-019-132
DZ333
401-013-131
DZ334
267-001.03
/4
/4
/2
1
/8
1
d2
Material
d1
41
55
32
41
steel, galvanized surface
1
) With female thread
Adaptors
with tapered thread
Tapered threads are used without washers, as they are self-sealing.
It is not necessary to provide the ports with seal faces.
1-0103-EN
404-662K
404-663K
404-673K
404-047K
404-003K
404-045
404-006K
401-004-512
404-040K
404-040K-US
404-054K
404-072
401-004-903
401-004-904
406-004K
301-105K
456-004K
406-054K
2.5
4
6
d1 1)
M6 ×0.75 tap.
M8 ×1 tap.
M10×1 tap.
M6 tap.
M6 tap.
M6×0.75 tap.
M7 tap.
M8×1 tap.
M8×1 tap.
M10×1 tap.
M10×1 tap.
R 1/8 tap.
1
/8 NPTF
R 1/4 tap.
1
/4-28 UNF
1
/4 BSF
1
/16 BSF
M10×1 tap.
M12×1 tap.
R 1/8 tap.
R 1/4 tap.
d2
M6 ×0.75
M8 ×1
M10× 1
l1
l2
11.5
15
16
4.5
8
7.5
WAF
8
9
12
19
20
20
20
17
62.5
16
25
16
20
14
20
20
18
5
6
6
6
7.4
7.4
7.4
7.4
6
6.7
9
5.6
5
5
11
11
11
11
11
11
11
11
11
11
14
11
11
11
23
18
21
20
7.4
7.4
6
9
14
14
14
17
Material
F05
S!
steel, galvanized surface
[
402-003K
402-006K
402-008K
Tube diam.
[!
Order No.
S
1
) Tapered thread according to DIN 158. short, resp. according to DIN 2999
7
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Bulkhead connectors
with tapered thread (for sealed tube passage through a wall without tube interruption)
Order No.
Tube diam.
404-003DK
404-006DK
406-004DK
301-001DK
410-004DK
M8×1 tap.
M10×1 tap.
M10×1 tap.
M14×1.5 tap.
M16×1.5 tap.
d2
l1
l2
M8×1
M8×1
M10×1
M14×1.5
M16×1.5
17
16
18
24
24
7.4
7.4
7.4
11
11
WAF
S!
F05
11
11
14
17
19
[
4
4
6
8
10
d1 1)
[!
Material: steel, galvanized surface
1
) Tapered thread according to DIN 158. short
S
Elbows
[!
F05
504-510K
514-018K
506-508K
506-510K
506-512K
508-512K
4
4
6
6
6
8
d1 1)
M10×1 tap.
R 1/8 tap.
M8×1 tap.
M10×1 tap.
M12×1 tap.
M12×1 tap.
d2)
d3
M8×1
M8×1
M10×1
M10×1
M10×1
M14×1.5
d4
l1
l2
l3
13
13
14
14
14
19.5
21
21
18
18
18
19.5
16
16
18
18
18
24
10
10
10.5
10.5
10.5
10
13
13
12.5
12.5
12.5
14
WAF
[
Tube diam.
["
Order No.
S!
S#
with tapered thread
14
S
S"
Material: die-cast zinc
502-206K
506-202K
403-006-651
2.5
6
6
M6 tap.
M10×1 tap.
R 1/4 tap.
d2
M6×0.75
M10×1
M10×1
d3
d4
l1
l2
l3
Material
–
17
14
8
17
14
10
22
17
9.5
21
17.5
6
11
8.5
steel
brass
steel
d2
d4
d1 1)
l3
Tube diam.
l1
Order No.
l2
d1
d3
13,6
4
Material
M6 tap.
M8×1 tap.
M10×1 tap.
M6x0.75 tap.
brass
d1
1
) Tapered thread according to DIN 158. short, resp. according to DIN 2999
Elbows
13
406-145K
406-045K
406-089K
406-090K
406-091K
406-092K
406-093K
M8×1 tap.
M10×1 tap.
M8×1 tap.
M10×1 tap.
R 1/8 tap.
M10×1 tap.
R 1/8 tap.
M10×1
M10×1
M10×1
M10×1
G 1/8
M10×1
M10×1
7.5
7.5
11
11
11
17
11
21
21
24
24
24
30
24
1
1
2
2
2
2
2
Material: steel, galvanized surface
8
~13
l2
Fig.
l1
l2
d1
l1
l2
d1
l1
d
d1
Order No.
Fig. 1
d
d
Fig. 2
1-0103-EN
504-200K
504-201K
504-202K
504-203K
d1 1)
M8×1
ø12
Tube diam.
13,5
7,5
Order No.
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
l2
Elbows
6
8
10
12
6
8
10
12
d2
d3
d4
l1
l2
l3
M10×1
M14×1.5
M16×1.5
M18×1.5
8
11
15
15
14
18
23
23
30.8
37
42.5
46
21
24.5
26.5
26.5
22
27
29
32
d3
l1
Tube diam. d1
1.4
l3
Order No.
DY958
DY960
DY961
DY962
d2
d4
with tube end (for installation in counterbores as per DIN 3854/DIN 3862)
d1
Material: brass
Tube end for tube connection
Screw plugs (sealed by flat washer to DIN 7603)
l2
l3
WAF
1
14
18
22
26
32
39
17
17
21
26
30
32
8
8
12
14
16
16
3
3
3
4
4
5
11
14
17
19
24
27
9
9.5
12
12
12
14
15
5
5.5
7
7
7
8
10
11
15
15
8
12
12
G
G
G
G
G
G
402-011
404-011
406-011
408-211
408-011
410-011
412-011
M6×0.75
M8×1
M10×1
M12×1
M14×1.5
M16×1.5
M18×1.5
/8 A
/4 A
/8 A
1
/2 A
3
/4 A
1 A
1
3
DIN 908-M10×1-5.8 1)
M10×1
DIN 908-M12×1.5-5.8 1) M12×1.5
DIN 908-M14×1.5-5.8 1) M14×1.5
1
14
17
19
S!
steel,
galvanized surface
S
10
11
12
17
17
19
22
3
3
3
F05
F05
steel,
galvanized surface
[
DIN910-R1-8-5.8
DIN910-R1-4×8-5.8
DIN910-R3-8-5.8
DIN910-R1-2-5.8
DIN910-R3-4-5.8
DIN910-R1-5.8
Material
["
l1
[
d2
[!
d1
[!
Order No.
5
6
6
steel,
galvanized surface
S
F05
) Hexagon socket
;
Vent plugs
833-330-016
833-330-021
d1
d2
l1
l2
M10×1
G 1 /8 A
14
17
8
Material
steel,
galvanized surface
;!
Order No.
S
S!
1-0103-EN
Flat washers
h
Suitable for thread
mm
inches
13.9
1.1
M10
G 1/8
6.2
8.2
12.2
12.2
9.9
11.4
15.9
15.9
1
1
1.4
2
M6
M8
M12
M12
–
–
–
–
copper
12.2
14.2
13.3
16.2
17.2
18.2
20.2
21.2
22.2
27.3
30.3
33.3
14.9
17.9
17.9
19.9
20.9
21.9
23.9
25.9
26.9
31.9
35.9
38.9
1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
M12
M14
–
M16
–
M18
M20
–
M22
M27
M30
M33
–
–
G 1/4
–
G 3/8
–
–
1
G /2
–
–
–
–
copper
d1
d2
504-019-AL
10.2
DIN7603-A6×10-CU
DIN7603-A8×11.5-CU
508-215-CU
508-320-CU
DIN7603-A12×18-CU
DIN7603-A14×18-CU
508-108
DIN7603-A16×20-CU
DIN7603-A17×21-CU
DIN7603-A18×22-CU
DIN7603-A20×24-CU
DIN7603-A21×26-CU
DIN7603-A22×27-CU
DIN7603-A27×32-CU
DIN7603-A30×36-CU
DIN7603-A33×39-CU
Material
aluminum
h
Order No.
d1
d2
9
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Threaded sockets
d1
13
15
18
19
17
17
18
19
19
15
Material
3.5
3.5
3.5
5.5
5.5
5.5
5.5
7
7
5.5
steel
[
) Coated with micro-encapsulated adhesive
406-103
408-103
853-750-024
d1
M10×1
M12×1
G 1/4 A
d2
M12×1
M14×1.5
G 1 /4 A
d3
l
l1
l2
5
6
7
20
21
31
6
7
10.5
7
7
10.5
WAF
F05
Material
14
17
19
steel,
galvanized
surface
S"
S!
Order No.
S
1
M8×1
M10×1
M10×1
M12×1
M12×1
M12×1
M14×1.5
M16×1.5
M16×1.5
G 1/4 A
WAF
05
F
404-203
406-203
406-243-B 1)
408-243-B 1)
458-012
458-012-B 1)
408-023
410-003
410-003-B 1)
408-033-S3
l
S
Order No.
[
[!
[
d3
l
Material
M10×1
4
26
brass
d1
406-233
d1
d3
l
Order No.
Distributor connection
Connectors
404-008
404-009
406-008
406-005
408-008
410-008
412-008
4
4
6
6/8
8
10
12
44-1755-2019 1)
d1
d2
M14×1.5
M14×1.5
M14×1.5
M16×1.5
M20×1.5
M20×1.5
M24×1.5
M8×1
M8×1
M10×1
M14×1.5
M14×1.5
M16×1.5
M18×1.5
R1/4
M10×1
d3
M8×1
M8×1
M10×1
M10×1
M14×1.5
M16×1.5
M18×1.5
l
l1
27
38
30
35
40
42
48
19
30
20
23
28
27
33
33
F05
WAF Material
17
17
17
19
24
24
27
steel,
galvanized
surface
S"
S
Tube diam.
S!
Order No.
[
[
24
1
) Hexagon socket
10
M8×1
M10×1
M14×1.5
M14×1.5
M16×1.5
M18×1.5
M8×1
M10×1
M10×1
M14×1.5
M16×1.5
M18×1.5
ø d4
l
l1
10.8
13.8
16.8
16.8
18.8
21.8
27
30
35
40
42
48
13
10
11
14
13
18
[
[
WAF Material
11
14
17
17
19
22
F05
steel,
galvanized
surface
1-0103-EN
4
6
6/8
8
10
12
d3
S"
404-010
406-010
406-805
408-010
410-010
412-010
d2
ßS#
Tube diam.
S!
Order No.
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Elbow connectors
l2
l3
Material
18
18
16.5
12
12
14
33
33
27
16
18
17.5
22
22
15
die-cast zinc
brass
brass
d2
d3
d4
l1
l2
Material
M14×1.5
M16×1.5
20
21
20
21
23.5
26
23.5
26
die-cast zinc
M8×1
M8×1
M10×1
Order No. Tube diam.
408-013
410-013
8
10
d3
d2
d1
d2
d1
30
M8×1
Material
33
Tube diam.
7
ø12
Bracketed connectors
Order No.
l
l1
d2
d4
d4
4
die-cast zinc
6.4
504-004
20
M14×1.5
d3
9
4
4
6
d2
l1
504-003
504-103
506-004
d1
l3
Order No. Tube diam.
l2
14
6
30
Material
13
h
l
Material
M10×1
M14×1.5
15
20
20
25
12
15
aluminum
14
h
b
l
6
8
d
5
DAR506
DAR508
Tube diam.
5
40
d
Order No.
6.4
brass
M10×1
6
ø14
506-010
Tube diam.
27
Order No.
b
6.6
25
9
Tube diam.
d1
d2
Material
M16×1.5
M14×1.5
M16×1.5
steel, galvanized
surface
6.6
30
d1
10
8 / 10
d2
DAR510
DAR510-S1
19
5
Order No.
4
30
6
steel, galvanized surface
13
20
Material
5
DAR524
Tube diam.
20
13
Order No.
M8×1
43
6.6
25
Material
13
13.5
steel, galvanized surface
20
4
6
30
5
13
DAR534
Tube diam.
M8×1
26
Order No.
ø6.6
6.6
40
Tube-to-tube-connector with air vent
M8×1
M10×1
b
20
h
50
l
40
Material body
9
30
aluminum
h
4
6
d
6.6
995-001-104
995-001-106
Tube diam.
21
10
d
1-0103-EN
Order No.
0
l
b
11
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Tee connectors
Order No.
504-008
506-408
506-008
510-102
Tube diam. d1
4
6/4
6
10
d2
M8×1
M10×1
M10×1
M16×1.5
M8×1
M8×1
M10×1
M16×1.5
d3
l1
l2
Material
12
14
14
20
15
18
18
25
30.5
36
36
50
die-cast zinc
l1
d3
d1
l2
d2
d3
ø18
M10×1
M14×1.5
die-cast zinc
ø18
8/6
8
Material
23
d2
37
508-602-2
508-002-2
Tube diam.
8,5
Order No.
M14x1,5
d2
6,6
46
20
22
15
504-045
4
M8x1
ø12
Material
24
Tube diam.
12
Order No.
30
die-cast zinc
6,4
6
14
M10×1
M14×1.5
d2
l1
l2
l3
l4
Material
6
8
40
45
22
25
32
36
37
46
brass
l3
6
8
d1
l2
DY964
DY966
Tube diam.
l1
Order No.
d1
l4
d2
M10×1
M14×1.5
M16×1.5
M10×1
M18×1.5
b
c
h
h1
l1
l2
6.6
6.6
7
7
6.6
22
32
25
25
42
20
20
20
25
25
9
9
13.5
13.5
9
30
40
40
40
40
9
9
15
15
9
40
50
52
52
60
20
29
29
29
29
h
M10×1
M14×1.5
M16×1.5
M16×1.5
M18×1.5
a
l2
6
8
10
6
12
d3
h1
DAT506
DAT508
DAT510 1)
DAT510-S5
DAT512
d2
d1
l1
Order No. Tube diam. d1
d3
Material: aluminum, 1) steel, galvanized surface
b
d2
a
c
25
8 (1×)
10 (2×)
(50)
DAT510-S1
Material
steel, galvanized surface
M16x1,5
Tube diam.
9
Order No.
25
M14x1.5
6,6
M8
(20)
1-0103-EN
25
50
12
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Distributor manifold
d2
=
t
ø7.4
4
h1
d1
ø4.3
t
h
=
d3
l1
=
2.8
b
=
=
=
l
Main tube port
tube diam.
Order No.
4
322-541
323-541
Main tube port
tube diam.
Order No.
6
321-661
322-661
323-661
324-761
325-861
326-661
328-761
329-761
330-761
331-761
332-761
Main tube portNumber
tube diam.
Order No.
6
322-861
324-861
326-663
328-861
330-861
332-861
334-861
336-861
338-861
340-861
342-861
344-861
Main tube portNumber
tube diam.
Order No.
6
322-561
323-561
324-561
325-565
326-562
327-564
328-561
329-561
Main tube portNumber
tube diam.
Order No.
1-0103-EN
8
321-581
322-581
322-661-S1
323-581
323-661-S1
324-581
325-581
326-581
327-581
328-581
329-581
330-581
330-581-S1
331-581
332-581
Number
of port
2
3
Number
of port
1
2
3
4
5
6
8
9
10
11
12
of port
2
4
6
8
10
12
14
16
18
20
22
24
of port
2
3
4
5
6
7
8
10
of port
1
2
2
3
3
4
5
6
7
8
9
10
10
11
12
d1
d3
l
l1
h
h1
b
t
M8×1
M8×1
2x M8×1
3x M8×1
–
–
49
62
–
–
17
17
10.5
10.5
13
13
13
13
d1
d2
d3
l
l1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
d2
2x
3x
4x
5x
6x
8x
9x
10x
11x
12x
d1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
11x
12x
d1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
–
–
–
–
–
–
–
–
–
–
–
d2 (above)
d3 (below)
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
11x
12x
d2
d3
2x
3x
4x
5x
6x
7x
8x
10x
M8×1
M8×1
M8×1
M8×1
M8×1
M8×1
M8×1
M8×1
–
–
–
–
–
–
–
–
d2
d3
1x
2x
2x
3x
3x
4x
5x
6x
7x
8x
9x
10x
10x
11x
12x
M8×1
M8×1
M10×1
M8×1
M10×1
M8×1
M8×1
M8×1
M8×1
M8×1
M8×1
M8×1
M8×1
M8×1
M8×1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
d1
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
41
58
75
92
109
126
160
177
194
211
228
l
41
58
77
92
109
126
143
160
177
194
211
228
–
–
–
34
51
68
52
119
136
153
170
l1
–
–
52
34
51
68
85
102
119
136
153
170
h
h1
b
t
20
20
20
20
20
20
20
20
20
20
20
11
11
11
11
11
11
11
11
11
11
11
18
18
18
18
18
18
18
18
18
18
18
–
17
17
17
17
17
17
17
17
17
17
h
h1
b
t
20
20
17
20
20
20
20
20
20
20
20
11
11
11
11
11
11
11
11
11
11
11
18
18
18
18
18
18
18
18
18
18
18
–
17
19
17
17
17
17
17
17
17
17
20
11
18
17
l
l1
h
h1
b
t
52
65
78
91
104
117
130
156
–
–
–
–
52
39
52
78
17
17
17
17
20
20
17
17
10.5
10.5
10.5
10.5
11
11
10.5
10.5
13
13
13
13
18
18
13
13
13
13
13
13
13
13
13
13
l
l1
48
61
72
74
94
87
74
113
126
139
152
165
201
178
191
–
–
–
–
–
–
–
39
52
65
78
91
85
104
117
h
h1
b
t
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
–
13
22
13
22
13
13
13
13
13
17
13
17
13
13
Material: aluminum alloy
13
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Standard manifolds, configurable *)
Order example
V
Order code
L
–
Product series
Number of ports
01 = 1 port
02 = 2 ports
03 = 3 ports
04 = 4 ports
05 = 5 ports
06 = 6 ports
08 = 8 ports
10 = 10 ports
Design of outlet thread
A = Standard profile, M8×1 with counterbore for O-ring
B = Standard profile, M10×1 with counterbore for O-ring
C = Standard profile, M14×1.5 with counterbore for flat washer
D = Small profile, M8×1 with surface suitable for sealing with flat washer
E = Small profile, M10x1 with surface suitable for sealing with flat washer
F = Standard profile, M8×1 with surface suitable for flat washer
G = Standard profile, M10×1 with surface suitable for flat washer
VL-02AAM3
• Product series VL
• 2 ports
• Standard profile made of aluminum
• M8×1 internal thread with counterbore
for O-ring
• M10×1 main line connection with counterbore for solderless pipe connection
per DIN 3862
Material
A = Aluminum; E = Stainless steel (only for outlet threads A+B)
Design of main line connection
G1 = G1/8 to DIN 3852-2, Form X, small
G2 = G1/4 to DIN 3852-2, Form X, small
M1 = M10×1 to DIN 3852-1, Form X, small
M2 = M14×1.5 to DIN 3852-1, Form X, small
M3 = M10×1 with counterbore for solderless pipe connection per DIN 3862
M4 = M14×1.5 with counterbore for solderless pipe connection per DIN 3862
(can only be selected for normal profile)
M8×12)
M8×12)
M8×12)
~ 22
ø7,4
d11)
11
B
C
A
ø4,3
4
d11)
Standard profile A
2,8
1)
E
Dimensions [mm]
A
B
C
E
F
M10×1 (M3)
1
2
3
4
5
6
8
10
40
55
70
85
100
115
145
175
20
27.5
27.5
27.5
27.5
27.5
27.5
27.5
–
–
15
30
45
60
90
120
20
20
20
20
20
20
20
20
–
1x15
2x15
3x15
4x15
5x15
7x15
9x15
M10×1 (M1)
G1/8 (G1)
1
2
3
4
5
6
8
10
34
49
64
79
94
109
139
169
17
24.5
24.5
24.5
24.5
24.5
24.5
24.5
–
–
15
30
45
60
90
120
17
17
17
17
17
17
17
17
–
1x15
2x15
3x15
4x15
5x15
7x15
9x15
Main line
Number of
connection d1 ports
*) See also www.cadenas.com
14
F
2)
F
For solderless pipe connection
per DIN 3862
DIN 3852-3 Form W
Dimensions [mm]
A
B
C
E
F
M14×1.5 (M4)
1
2
3
4
5
6
8
10
48
63
78
93
108
123
153
183
24
31.5
31.5
31.5
31.5
31.5
31.5
31.5
–
–
15
30
45
60
90
120
24
24
24
24
24
24
24
24
–
1x15
2x15
3x15
4x15
5x15
7x15
9x15
M14×1.5 (M2)
G1/4 (G2)
1
2
3
4
5
6
8
10
46
61
76
91
106
121
151
181
23
30.5
30.5
30.5
30.5
30.5
30.5
30.5
–
–
15
30
45
60
90
120
23
23
23
23
23
23
23
23
–
1x15
2x15
3x15
4x15
5x15
7x15
9x15
Main line
Number of
connection d1 ports
1-0103-EN
Distributor manifold
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
M10×12)
M10×12)
~ 22
d11)
M10×12)
11
B
C
A
ø4.3
4
d11)
Standard profile B
ø7.4
Distributor manifold
1)
2)
E
F
Dimensions [mm]
A
B
C
E
F
M10×1 (M3)
1
2
3
4
5
6
8
10
40
57
74
91
108
125
159
193
20
28.5
28.5
28.5
28.5
28.5
28.5
28.5
–
–
17
34
51
68
102
136
20
20
20
20
20
20
20
20
–
1x17
2x17
3x17
4x17
5x17
7x17
9x17
M10×1 (M1)
G1/8 (G1)
1
2
3
4
5
6
8
10
34
51
68
85
102
119
153
187
17
25.5
25.5
25.5
25.5
25.5
25.5
25.5
–
–
17
34
51
68
102
136
17
17
17
17
17
17
17
17
–
1x17
2x17
3x17
4x17
5x17
7x17
9x17
Main line
Number of
connection d1 ports
2.8
For solderless pipe connection
per DIN 3862
DIN 3852-3 Form X, small
F
Dimensions [mm]
A
B
C
E
F
M14×1.5 (M4)
1
2
3
4
5
6
8
10
52
69
86
103
120
137
171
205
26
34.5
34.5
34.5
34.5
34.5
34.5
34.5
–
–
17
34
51
68
102
136
26
26
26
26
26
26
26
26
–
1x17
2x17
3x17
4x17
5x17
7x17
9x17
M14×1.5 (M2)
G1/4 (G2)
1
2
3
4
5
6
8
10
46
63
80
97
114
131
165
199
23
31.5
31.5
31.5
31.5
31.5
31.5
31.5
–
–
17
34
51
68
102
136
23
23
23
23
23
23
23
23
–
1x17
2x17
3x17
4x17
5x17
7x17
9x17
Main line
Number of
connection d1 ports
Distributor manifold
Standard profile C
ø7.4
~ 22
d11)
11
B
C
A
ø4.3
4
d11)
M14×1.52) M14×1.52) M14×1.52)
2.8
1)
2)
E
Main line
Number of
connection d1 ports
Dimensions [mm]
A
B
C
E
F
60
70
94
118
142
166
214
262
–
1x24
2x24
3x24
4x24
5x24
7x24
9x24
18
35
35
35
35
35
35
35
24
–
24
48
72
96
144
192
30
23
23
23
23
23
23
23
F
Main line
Number of
connection d1 ports
M14×1.5 (M4)
1
2
3
4
5
6
8
10
Dimensions [mm]
A
B
C
E
F
68
78
102
126
150
174
222
270
–
1x24
2x24
3x24
4x24
5x24
7x24
9x24
22
39
39
39
39
39
39
39
24
–
24
48
72
96
144
192
34
27
27
27
27
27
27
27
1-0103-EN
M10×1 (M3)
1
2
3
4
5
6
8
10
F
For solderless pipe connection
per DIN 3862
DIN 3852-1 Form X, small
15
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Distributor manifold
Small profile D
13
ø7.4
Main line
Number of Dimensions [mm]
A
B
C
F
connection d1 ports
2.8
M10×1 (M3)
F
6.5
F
ø4.3
4
C
A
B
19.5
17
d12)
10.5
d12)
M8×11) M8×11) M8×11) M8×11) M8×11) M8×11)
1)
2)
Depth 5.5 mm with surface
suitable for flat washers
DIN 3852-3 Form W
1
2
3
4
5
6
8
10
39
52
65
78
91
104
130
156
19.5
26
32.5
39
45.5
26
39
39
–
–
–
–
–
52
52
78
–
1x13
2x13
3x13
4x13
5x13
7x13
9x13
Small profile E
20,5
F
ø7.4
2.8
4
ø4.3
C
A
B
F
1)
2)
Depth 8 mm
For solderless pipe connection
per DIN 3862
M10×1 (M3)
1
2
3
4
5
6
8
10
41
58
75
92
109
126
160
194
20.5
26
37.5
29
29
29
29
29
–
–
–
34
51
68
102
136
–
1x17
2x17
3x17
4x17
5x17
7x17
9x17
1-0103-EN
9
Main line
Number of Dimensions [mm]
A
B
C
F
connection d1 ports
18
d12)
20
11
d12)
M10×11) M10×11) M10×11) M10×11)
16
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Cross joints
b
l1
a
b
h
l1
l2
Material
DAK504-S1
DAK506
DAK508
DAK510
DAK512
22
22
32
25
42
20
20
20
20
25
40
40
50
56
60
40
40
50
50
60
20
20
25
28
30
aluminum
l2
6.6
9
a
25
(20)
7
15
M10×1 / M8×1
M10×1
M14×1.5
M16×1.5
M18×1.5
9
4/6
6
8
10
12
h
d1
Order No. Tube diam. d1
M16×1.5
60
steel, galvanized surface
d1
10
Material
10
DAK510-S1
d1
32
Order No. Tube diam.
(50)
Banjo fittings
1-0103-EN
Order No.
504-114
504-115
504-105
405-619-061
506-114
506-342
506-101
586-342
506-013
506-345
506-346
508-342
508-012
508-034
568-342
508-304
508-345
508-346
510-342
510-344
510-343
510-346
510-341
2.5
2.5
2.5
4
4
4
4
4
4
4
6
6
6
6
6
6
8
8
8
8
10
10
10
Tube diam.
4
4
4/6
4/6
6
6
6
6/8
6/8
6 / 10
6 / 10
8
8
8
8/6
8/6
8 / 10
8 / 10
10
10
10
10 / 6
10 / 8
d1
M6
M6×0.75
M8×1
M6
M6×0.75
M8
M8×1
M8×1
M10×1
G 1 /8 A
M10×1
M12×1
M14×1.5
M16×1.5
G 1 /8 A
G 1 /4 A
M12×1
M14×1.5
M16×1.5
G 1 /4 A
M12×1
M16×1.5
G 1 /4 A
d1
M8×1
M10×1
M10×1
G 1 /8 A
M10×1
M12×1
M14×1.5
M12×1
M14×1.5
M12×1
M16×1.5
M12×1
M14×1.5
G 1 /4 A
M12×1
M14×1.5
M12×1
M16×1.5
M12×1
M16×1.5
G 1 /4 A
M16×1.5
M12×1
d2
M6×0.75
M6×0.75
M6×0.75
M8×1
M8×1
M8×1
M8×1
M8×1
M8×1
M8×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M16×1.5
M16×1.5
M16×1.5
d2
M8×1
M8×1
M8×1
M8×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M10×1
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M16×1.5
M16×1.5
M16×1.5
M16×1.5
M16×1.5
d3
M8×1
M8×1
M10×1
M10×1
M10×1
M10×1
M10×1
M14×1.5
M14×1.5
M16×1.5
M16×1.5
M14×1.5
M14×1.5
M14×1.5
M10×1
M10×1
M16×1.5
M16×1.5
M16×1.5
M16×1.5
M16×1.5
M10×1
M14×1.5
l1
l2
l3
20
18
20
20
18
23
20
26
26
27
26
34
34
35
27
35
34
34
35
35
34
35
35
13
13
14
17
17
18
18
18
19
19
21
25
25
30
21
25
27
27
30
27
30
30
30
19
19
21
24
24
25
25
25
27.5
27.5
28.5
35.2
35.2
41
28.5
35.2
37
37
41
37
40
41
40
l4
4.5
5
6.5
4.1
4.5
7.5
7
6.5
6.5
6.8
6.5
7.5
7.5
8.7
7
8.5
7.5
7.5
8.7
8.5
7.5
10.7
7.5
WAF
9
9
11
9
9
11
11
11
14
14
14
17
17
19
14
17
17
17
19
17
17
19
17
l1
l2
l3
l4
WAF
31
31
33
33
33
38
40
44
43
48.5
50
44
43
44
38
40
48.5
50
48.5
50
48.5
50
44
18
19
19
19
21
25
25
25
25
25
30
27
27
27
27
27
27
30
30
30
30
30
30
25.5
27.5
27.5
27.5
28.5
35.2
35.2
35.2
35.2
35
41
37
37
37
37
37
37
41
40
41
40
41
40
6.5
6.5
6.5
6.3
6.3
7.5
7.5
7.5
7.5
7.7
8.7
7.5
7.5
7.5
7.5
7.5
7.7
8.7
7.5
8.7
7.5
8.7
7.5
11
14
14
14
14
17
17
17
17
19
19
17
17
17
17
17
19
19
19
19
19
19
17
Banjo bolt
WAF
Washer
d2
Tube diam.
l1
)
1
)
1
)
1
)
1
)
1
)
1
)
Washer
d1
l2
Banjo
union
1
l3
) Miniature design
S"
F05
Washer
Banjo bolt
S!
L-type
1
l4
502-161
502-101
502-102
504-161
504-162
504-411
504-401
504-101
504-102
504-108
506-140
506-142
506-012
506-145
506-108
506-214
508-142
508-144
508-145
508-024
510-142
510-145
510-024
[#
Order No.
[
Elbow
Washer
S
[!
Banjo union
["
17
Solderless pipe union with tapered sleeve acc. to DIN 3862
For pressures up to 45 bar
Banjo fittings
l1
l2
504-109
504-112
506-242
506-025
508-242
508-013
508-025
510-242
M8×1
M10×1
M12×1
M14×1.5
M12×1
M14×1.5
G 1 /4 A
M12×1
M8×1
M8×1
M10×1
M10×1
M14×1.5
M14×1.5
M14×1.5
M16×1.5
26
26
34
34
34
34
35
34
38
38
48
48
54
54
54
60
4
4
6
6
8
8
8
10
l3
6.5
6.5
7.5
7.5
7.5
7.5
7.5
7.5
WAF
11
14
17
17
17
17
17
17
Double
banjo union
Banjo bolt
F05
Washer
S!
d2
S!
d1
[
Order No. Tube diam.
["
Tee
S
[!
d3
l1
l2
l3
WAF
M8×1
M8×1
M8×1
M10×1
M10×1
M10×1
M10×1
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M16×1.5
M8×1
M8×1
M10×1
M10×1
M10×1
M14×1.5
M14×1.5
M14×1.5
M14×1.5
M10×1
M10×1
M16×1.5
31
31
33
38
40
44
43
44
43
38
40
48.5
38
38
38
48
48
48
48
54
54
54
54
60
6.5
6.5
6.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
11
14
14
17
17
17
17
17
17
17
17
19
6
8
8
Banjo bolt
F05
Washer
S
[!
Washer
Double banjo union
1-0103-EN
6
6
S"
S!
d2
M8×1
M10×1
M10×1
M12×1
M14×1.5
M12×1
M14×1.5
M12×1
M14×1.5
M12×1
M14×1.5
M12×1
4
4
4/
6
6
6/
6/
8
8
8/
8/
10
[
d1
504-110
504-111
504-106
506-442
506-014
586-442
506-026
508-442
508-014
568-442
508-305
510-442
S!
Order No. Tube diam.
["
Cross
Washer
18
SKF Quick Connectors
For pressures up to 300 bar (metal tube with claw groove)
Tools for the preparation of claw grooves on the ends of steel tubes
Tube cutter
for tube diam.
Tube cutter
Order No.
Cutting wheel
Order No.
4
6
8
169-000-336
169-000-337
169-000-338
844-330-006
844-330-007
844-330-007
3.1
4.9
6.9
b
±0.2
c
5.0
6.2
6.2
0.3 … 0.7
0.4 … 0.9
0.5 … 0.9
cdQTß
a
4
6
8
R
ßP
+0.3
for tube diam.
!
—
Claw groove
Q
Adaptors
with cylindrical thread
Tube diam. A G
øB
øC
4
4
4
4
M8×1
M10×1
M10×1
G 1/8
6
6
6
6
8.8
8.8
8.8
8.8
11.5
13.5
13.5
13.5
23.8
23.8
23.8
23.8
l
WAF1
10
12
12
12
WAF2
2.5
2.5
2.5
2.5
Seal
NBR
NBR
FKM (FPM)
NBR
406-158-VS
406-004-VS
406-004-S8-VS
456-004-VS
406-054-VS
406-162-VS
406-162-S8-VS
6
6
6
6
6
6
6
M8×1
M10×1
M10×1
G 1/8
G 1/4
M12×1
M12×1
6
6
6
6
7
7
7
11.7
11.7
11.7
11.7
11.7
11.7
11.7
13.2
13.5
13.5
13.5
16.4
15.4
15.4
30.5
27
27
27
28
28
28
12
12
12
12
12
14
14
3
4
4
4
4
4
4
NBR
NBR
FKM (FPM)
NBR
NBR
NBR
FKM (FPM)
408-004-VS
408-004-S8-VS
408-162-VS
408-162-S8-VS
8
8
8
8
M10×1
M10×1
M12×1
M12×1
6
6
7
7
13.9
13.9
13.9
13.9
15.2
15.2
15.2
15.2
32.3
32.3
32.8
32.8
14
14
14
14
5
5
6
6
NBR
FKM (FPM)
NBR
FKM (FPM)
F05!
6
D
404-003-VS
404-006-VS
404-006-S8-VS
404-040-VS
ß2
ß1
ß0
Order No.
3
F05
[
with tapered thread
1-0103-EN
Tube diam. A G
øB
øC
l
WAF1
WAF2
4
4
4
4
4
M6 tap.
M8×1 tap.
M10×1 tap.
1/4-28 SAE LT
1
/8 NPTF
5.5
5.5
5.5
5.1
8
8.8
8.8
8.8
8.8
8.8
11.5
11.5
11.5
11.5
11.5
25.8
23.3
22.8
26.3
24.8
10
10
10
10
10
2.5
2.5
2.5
2.5
2.5
451-006-468-VS
451-006-498-VS
451-006-518-VS
406-423W-VS
6
6
6
6
M6 tap.
M8×1 tap.
M10×1 tap.
R 1/8 tap.
5.5
5.5
5.5
6.5
11.7
11.7
11.7
11.7
13.5
13.5
13.5
13.5
30
29.5
27
28.5
12
12
12
12
2.5
4
4
4
F05
F05!
6
D
451-004-462-VS
451-004-498-VS
451-004-518-VS
404-673K-V1-VS
404-040K-V1-VS
ß2
ß1
ß0
Order No.
[
3
19
SKF Quick Connectors
For pressures up to 300 bar (metal tube with claw groove)
Elbows, pivoted
with cylindrical thread
øB
l1
l2
WAF1 WAF2
[
Seal
504-101-VS
504-102-VS
504-108-VS
4
4
4
M8×1
M10×1
G 1/ 8
6
6
6
10
10
10
21.8
21.8
21.8
20.5
20.5
20.5
10
12
12
9
9
9
506-139-VS
506-140-VS
506-140-S8-VS
506-108-VS
506-142-VS
506-142-S8-VS
506-143-VS
6
6
6
6
6
6
6
M8×1
M10×1
M10×1
G 1/ 8
M12×1
M12×1
G 1/ 4
6
6
6
6
7
7
7
12.5
12.5
12.5
12.5
12.5
12.5
12,5
26
26
26
26
26
26
26
21
21
21
21
23
23
23
10
12
12
12
14
14
15
10
10
10
10
10
10
10
NBR
NBR
FKM (FPM)
NBR
NBR
FKM (FPM)
NBR
508-142-VS
508-142-S8-VS
8
8
M12×1
M12×1
7
7
14.5
14.5
28.8
28.8
23
23
14
14
12
12
NBR
FKM (FPM)
F05!
NBR
NBR
NBR
ß1
D
ß0
G
F05
[!
Tube diam. A
3
Order No.
6
with tapered thread
[
F05!
l2
4
4
4
4
4
4
4
G
M6 tap.
M6 tap.
M8×1 tap.
M8×1 tap.
M10×1 tap.
M10×1 tap.
R 1/8 tap.
D
6
6
6
6
6
6
7.5
øB
10
10
10
10
10
10
10
21.8
21.8
21.8
21.8
21.8
21.8
21.8
20
20
20
20
20
20
20.5
WAF1 WAF2
10
10
10
10
12
12
12
9
9
9
9
9
9
9
Seal
NBR
FKM (FPM)
NBR
FKM (FPM)
NBR
FKM (FPM)
NBR
455-529-068-VS
455-529-068-S8-VS
455-531-068-VS
455-531-068-S8-VS
455-565-068-VS
6
6
6
6
6
M8×1 tap.
M8×1 tap.
M10×1 tap.
M10×1 tap.
R 1/4 tap.
6
6
6
6
11
12.5
12.5
12.5
12.5
12.5
26
26
26
26
26
20
20
20.5
20.5
24.5
10
10
12
12
14
10
10
10
10
10
NBR
FKM (FPM)
NBR
FKM (FPM)
NBR
ß0
ß1
Tube diam. A
F05
3
l1
455-546-048-VS
455-546-048-S8-VS
455-529-048-VS
455-529-048-S8-VS
455-531-048-VS
455-531-048-S8-VS
455-569-048-VS
[!
Order No.
6
Banjo fittings
øB
l1
l2
WAF1
4
4
4
M5
M8
M10×1
5
7
7
8.8
8.8
8.8
21.8
23.8
24.8
18
20
22.5
8
12
14
Seal
NBR
NBR
NBR
445-519-041-VS
4
G1/8
7
8.8
24.8
22.5
14
NBR
[
F05
ß0
ß1
Tube diam. A G
3
D
504-401-S1-VS
504-411-VS
504-103-VS
[!
Order No.
1-0103-EN
6
20
SKF Quick Connectors
For pressures up to 300 bar (metal tube with claw groove)
Elbows with tapered thread
øB
l1
l2
WAF
Seal
4
4
4
4
4
4
4
4
4
4
M6 tap.
M6 tap.
M8×1 tap.
M8×1 tap.
M10×1 tap.
M10×1 tap.
R 1/8 tap.
R 1/8 tap.
1
/4-28 SAE LT
1
/8 NPTF
6
6
6
6
6
6
7.5
7.5
5.1
7
10
10
10
10
10
10
10
10
10
10
21.8
21.8
21.8
21.8
21.8
21.8
21.8
21.8
21.8
21.8
14
14
13.5
13.5
13.5
13.5
15
15
15.5
15
9
9
9
9
9
9
9
9
9
9
NBR
FPM
NBR
FPM
NBR
FPM
NBR
FPM
NBR
NBR
453-006-468-VS
453-006-468-S8-VS
506-508-VS
506-508-S8-VS
506-510-VS
506-510-S8-VS
506-511-VS
506-511-S8-VS
506-512-VS
453-006-651-VS
6
6
6
6
6
6
6
6
6
6
M6 tap.
M6 tap.
M8×1 tap.
M8×1 tap.
M10×1 tap.
M10×1 tap.
R 1/8 tap.
R 1/8 tap.
M12×1 tap.
R 1/4 tap.
6
6
6.5
6.5
6
6
8.5
8.5
7
11.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
26
26
26
26
26
26
26
26
26
26
15
15
14
14
14
14
16.5
16.5
15
19.5
10
10
10
10
10
10
10
10
10
10
NBR
FPM
NBR
FPM
NBR
FPM
NBR
FPM
NBR
NBR
[
F05
ß0
ß1
Tube diam. A G
[!
D
453-004-471-VS
453-004-471-S8-VS
504-201-VS
504-201-S8-VS
504-202-VS
504-202-S8-VS
514-018-VS
514-018-S8-VS
504-200K-V1-VS
514-018K-V1-VS
3
Order No.
6
VPKM-RV-VS
VPKG-RV-VS
6
6
Opening pressure [bar]
G
3 +2
3 +2
M10×1 tap.
R 1/8 tap.
6
Tube diam.
ß "$
Order No.
CdQTß%
Check valve
'
F05 !
m""$
406-426-VS
Tube diam.
ß !
Order No.
CdQTß%
Connector
6
##$
Locking pin
l1
l1
l2
6
8
31
37
21
25
d
4
6
d1
1-0103-EN
450-204-002
450-206-002
Tube diam. d
d1
l2
Order No.
21
Solderless pipe union with cutting-sleeve
acc. to DIN EN ISO 8434-1 and DIN 2353
Cutting sleeves to DIN 3861/ ISO 8434-1
Pressure
[bar]
l
4
6
8
10
12
6
7
7
7
7.5
100
406-301
408-301
410-301
6
8
10
9.5
9.5
10
500
412-301
415-301
418-301
12
15
18
10
10
10
400
D
404-301 1)
406-331 1)
96-5708-0058 1)
96-5710-0058 1)
96-5712-0058 1)
d
D
(tube diam.)
d1
Order No.
Straight connectors (tube to tube)
l
Material: steel, galvanized
surface (Cr-6 free)
Order No.
404-404 1)
406-406
408-408
410-410
412-412
415-415
418-418
Tube diam.
d. d1
Reducing connectors
Tube diam. Tube diam.
Order No .
d
d1
504-410
504-412
506-410
506-412
508-410
506-413
508-412
510-410
508-413
510-412
512-410
510-413
512-412
515-410
4
6
8
10
12
15
18
Union nuts to DIN 3870/ ISO 8434-1
6
8
8
10
10
12
12
12
15
15
15
18
18
18
4
4
6
6
8
6
8
10
8
10
12
10
12
15
Material: steel,
galvanized surface
(Cr-6 free)
S
3
F05
Reducing connectors
D
(tube diam.)
404-302 1)
406-332 1)
96-5608-0058 1)
96-5610-0058 1)
406-302
d1
4
6
8
10
6
M8×1
M10×1
M12×1
M14×1
M12×1.5
l
WAF
11
11.5
12
12.5
14.5
10
14
14
17
14
408-302
410-302
8
10
M14×1.5
M16×1.5
14.5
15.5
17
19
412-302
96-2815-0058
96-2818-0058
12
15
18
M18×1.5
M22×1.5
M26×1.5
15.5
17
18
22
27
32
Pressure
[bar]
d
Order No.
d1
[
100
Order No.
500
400
Straight screw-in glands
with short threaded end for screwing into thread
408-406
410-406
443-706-121
443-706-151
443-706-181
410-408
443-708-121
443-708-151
443-708-181
443-710-061
412-410
415-410
443-710-181
443-712-151
418-412
422-412
443-715-181
Tube diam. d
6
6
6
6
6
8
8
8
8
10
10
10
10
12
12
12
15
ø d1
8
10
12
15
18
10
12
15
18
8
12
15
18
15
18
22
18
Tube diam. d
6
8
10
10
d1
M10×1 tap.
M14×1.5
M16×1.5
M14×1.5
d2
l
M10×1
M14×1.5
M16×1.5
M16×1.5
–
9
9
9
The cutting sleeve screw unions shown correspond to the L-series (light version).
1
) LL-series (extra light version)
22
1-0103-EN
Order No.
406-323
408-313
410-313
410-323
d2
d1
l
Solderless pipe union with cutting-sleeve
acc. to DIN EN ISO 8434-1 and DIN 2353
Straight screw-in connectors
to DIN 2353
Straight screw-in connectors
to DIN 2353
with metrical thread
with Whitworth pipe thread
6
6
8
10
12
12
14
16
20
M12×1.5
M14×1.5
M14×1.5
M16×1.5
M18×1.5
M18×1.5
M20×1.5
M22×1.5
M27×1.5
24-2105-2373
96-6002-0058
404-413
404-403
406-423
406-443
406-433
406-423
441-008-511
24-2105-2381
2.5
4
4
4
6
6
6
6
8
10
M6 tap.
M6×1 tap.
M8×1 tap.
M10×1 tap.
M10×1 tap.
M6 tap.
LL
M8×1 tap.
M10×1 tap.
M10×1 tap.
M10×1 tap.
410-443
10
M10×1 tap.
L
S
directionally adjustable
1-0103-EN
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
1
96-1106-0058
96-1108-0058
96-1109-0058
96-1111-0058
96-1110-0058
96-1112-0058
96-1113-0058
96-1114-0058
96-1117-0058
96-1116-0058
96-1121-0058
96-1120-0058
6
8
8
10
10
12
12
14
16
16
20
20
G
G
G
G
G
G
G
G
G
G
G
G
1
404-403W
406-423W
408-423W
96-5909-0058
96-5911-0058
24-2105-2382
96-5912-0058
96-5913-0058
4
6
8
8
10
10
11
12
R
R
R
R
G
G
G
G
1
Series
/4 A
1
/8 A
1
/4 A
3
/8 A
1
/8 A
1
/4 A
3
/8 A
1
/2 A
1
/4 A
3
/8 A
1
/2 A
1
/4 A
3
/8 A
1
/2 A
3
/4 A
1
/2 A
3
/8 A
1
/2 A
3
/4 A
1
/2 A
3
/4 A
3
/4 A
1A
L
/4 A
/4 A
/8 A
1
/4 A
3
/8 A
3
/8 A
1
/2 A
1
/2 A
3
/8 A
1
/2 A
1
/2 A
3
/4 A
1
3
S
/8
/8
/8
1
/4
1
/4
1
/8
1
/8
3
/8
1
1
tap.
tap.
tap.
tap.
tap.
tap.
tap.
tap.
LL
Series
d
6
8
10
12
15
18
M12×1.5
M14×1.5
M16×1.5
M18×1.5
M22×1.5
M26×1.5
443-406-351
443-408-083
96-3010-0060
96-3012-0060
96-3014-0060
96-3016-0060
6
8
10
12
14
16
M14×1.5
M16×1.5
M18×1.5
M20×1.5
M22×1.5
M24×1.5
S
443-410-211
10
G 3/8 A
S
443-406-691
443-410-161
6
10
G 1/8 A
G 1/4 A
L
Straight bulkhead connectors
d
L
<PgfP[[cWXRZ]Tbb
%
d1
S
443-406-061
443-408-081
443-410-101
443-412-121
443-415-151
443-418-181
S
d1
4
6
6
6
8
8
8
8
10
10
10
12
12
12
15
15
15
18
18
22
22
28
28
L
L-screw-in connectors
Order No. Tube diam. d
d1
44-2573-6330
406-403W
96-0204-0058
406-463W
96-0203-0058
408-403W
408-413W
408-453W
410-403W
410-413W
410-433W
412-423W
412-403W
412-453W
415-443W
415-403W
415-433W
418-403W
418-413W
96-0223-0058
96-0222-0058
428-413W
96-0228-0058
d
96-1206-0058
406-413
408-413
410-413
412-453
96-1212-0058
96-1214-0058
96-1216-0058
96-1220-0058
d
M10×1
M14×1.5
M18×1.5
M14×1.5
M16×1.5
M18×1.5
M18×1.5
M22×1.5
M22×1.5
M18×1.5
M22×1.5
M26×1.5
M33×2
M42×2
M48×2
d1
Order No. Tube diam. d
Series
6
10
10
12
12
12
15
15
18
18
22
22
28
35
42
S
d1
406-403
410-403
410-463
412-423
412-403
412-433
415-403
415-413
418-403
96-0319-0058
96-0321-0058
96-0322-0058
96-0328-0058
96-0335-0058
96-0342-0058
d1
Order No. Tube diam. d
Order No. Tube diam. d
ø d1
406-416
408-416
410-416
412-416
415-416
418-416
422-416
12.5
14.5
16.5
18.5
22.5
26.5
30.5
6
8
10
12
15
18
22
LL-series (extra light version)
L-series (light version)
S-series (heavy duty version)
23
Solderless pipe union with cutting-sleeve
acc. to DIN EN ISO 8434-1 and DIN 2353
Order No. Tube diam. d
ø d1
Order No. Tube diam. d d1
406-409
408-409
410-409
412-409
415-409
418-409
443-190-901
12.5
14.5
16.5
18.5
22.5
26.5
30.5
445-529-041
4
445-531-061
96-7808-0058
445-535-101
96-7812-0058
96-7815-0058
96-7818-0058
96-7822-0058
6
8
10
12
15
18
22
d
d1
Elbow connectors
Order No.
Tube diam. d
d
406-404
96-0408-0058
410-404
412-404
443-215-001
443-218-001
443-290-001
d
6
8
10
12
15
18
22
Elbow screw-in connectors
Tube diam. d
96-6202-0058
96-6204-0058
404-425
406-445
406-435
406-425
408-425
24
4
4
4
6
6
6
8
d1
M6 tap.
M8×1 tap.
M10×1 tap.
M6 tap.
M8×1 tap.
M10×1 tap.
M10×1 tap.
Series
LL
406-405
408-405
410-405
412-405
415-405
6
8
10
12
15
M10×1 tap.
M12×1.5 tap.
M14×1.5 tap. L
M16×1.5 tap.
M18×1.5 tap.
410-425
10
M16×1.5 tap. S
404-405W
96-6106-0058
96-6108-0058
96-6110-0058
96-6112-0058
4
6
8
10
12
R
R
R
R
R
1
/8
/8
/8
1
/4
1
/4
tap.
tap.
tap.
tap.
tap.
LL
406-405W
406-515W
408-425W
408-405W
410-405W
412-405W
415-405W
418-405W
6
6
8
8
10
12
15
18
R
R
R
R
R
R
R
R
1
/8
/4
1
/8
1
/4
1
/4
3
/8
1
/2
1
/2
tap.
tap.
tap.
tap.
tap.
tap.
tap.
tap.
L
96-1406-0058
96-1408-0058
96-1410-0058
96-1412-0058
96-1414-0058
96-1416-0058
6
8
10
12
14
16
R
R
R
R
R
R
1
tap.
tap.
tap.
tap.
tap.
tap.
S
1
1
1
/4
/4
/8
3
/8
1
/2
1
/2
1
3
d
Order No.
d1
LL-series (extra light version)
L-series (light version)
S-series (heavy duty version)
Series
M8×1
LL
6
8
10
12
15
18
22
M10×1
M12×1.5
M14×1.5
M16×1.5
M18×1.5
M22×1.5
M26×1.5
L
96-8006-0058
96-8008-0058
96-8010-0058
96-8012-0058
96-8014-0058
96-8016-0058
96-8020-0058
6
8
10
12
14
16
20
M12×1.5
M14×1.5
M16×1.5
M18×1.5
M20×1.5
M22×1.5
M27×1.5
S
96-7106-0058
96-7108-0058
6
8
M10×1
M10×1
LL
96-7004-0058
4
G 1/8 A
LL
445-519-041
445-519-061
445-516-061
445-516-081
445-516-101
445-521-122
445-513-181
445-517-222
4
6
6
8
10
12
18
22
G
G
G
G
G
G
G
G
1
96-7906-0058
96-7908-0058
96-7910-0058
96-7912-0058
96-7914-0058
96-7916-0058
96-7920-0058
6
8
10
12
14
16
20
G
G
G
G
G
G
G
1
96-7006-0058
96-7008-0058
6
8
/8 A
/8 A
/4 A
1
/4 A
1
/4 A
3
/8 A
1
/2 A
3
/4 A
1
1
L
/4 A
/4 A
3
/8 A
3
/8 A
1
/2 A
1
/2 A
3
/4 A
S
G 1/8 A
G 1/8 A
LL
1
1-0103-EN
Max. wall thickness
d1
Banjo fittings
d
16
d
Elbow bulkhead connectors
Solderless pipe union with cutting-sleeve
acc. to DIN EN ISO 8434-1 and DIN 2353
C
G1 / 4
d
Order No. Tube diam. d
6 #
ø6
< %g $
U^acdQTß L = light version
Tube ø d Order No.
4
6
6
6
8
8
10
10
12
12
96-8804-0058
406-411
248-610.01
441-106-162
408-411
441-108-162
410-411
441-110-163
412-411
441-112-162
S = heavy duty version
Version
C
A
B
C
A
C
A
C
A
C
Tube ø d Order No.
6
6
8
8
10
10
12
12
96-0406-0060
96-8906-0058
96-0408-0060
96-8908-0058
96-0410-0060
96-8910-0058
96-0412-0060
96-8912-0058
Version
A
C
A
C
A
C
A
C
Four-way connectors
d
Order No.
Tube diam. d
96-2106-0058
446-308-001
446-310-001
446-312-001
446-315-001
96-2118-0058
96-2122-0058
6
8
10
12
15
18
22
d1
Series
96-6404-0058
96-6406-0058
96-6408-0058
4
6
8
M8×1 tap.
M10×1 tap. LL
M10×1 tap.
96-0906-0058
96-0908-0058
445-910-551
96-0912-0058
96-0915-0058
6
8
10
12
15
M10×1 tap.
M12×1.5 tap.
M14×1.5 tap. L
M16×1.5 tap.
M18×1.5 tap.
96-1806-0058
96-1808-0058
96-1810-0058
96-1812-0058
96-1814-0058
96-1816-0058
6
8
10
12
14
16
M12×1.5
M14×1.5
M16×1.5
M18×1.5
M20×1.5
M22×1.5
tap.
tap.
tap. S
tap.
tap.
tap.
96-6304-0058
96-6306-0058
96-6308-0058
4
6
8
R 1/8 tap.
R 1/8 tap.
R 1/8 tap.
LL
96-0806-0058
96-0808-0058
96-0810-0058
96-0812-0058
96-0815-0058
96-0818-0058
6
8
10
12
15
18
R
R
R
R
R
R
1
/8
/4
1
/4
3
/8
1
/2
1
/2
tap.
tap.
tap.
tap.
tap.
tap.
L
96-1706-0058
96-1708-0058
96-1710-0058
96-1712-0058
96-1714-0058
96-1716-0058
6
8
10
12
14
16
R
R
R
R
R
R
1
tap.
tap.
tap.
tap.
tap.
tap.
S
445-721-121
445-713-151
445-717-221
12
15
22
G 3/8 A
G 1/2 A
G 3/4 A
L
445-735-101
445-739-151
10
15
M14×1.5
M18×1.5
L
1
/4
/4
/8
3
/8
1
/2
1
/2
1
3
d
B
G1/4
l
A
Tee screw-in connectors
d
Connectors for pressure gauges
d1
Tee screw-in connectors
d
directionally adjustable
Order No. Tube diam. d
d
Order No.
1-0103-EN
d
96-6904-0058 1)
406-407
408-407
410-407
412-407
415-407
418-407
422-407
Tube diam. d
4
6
8
10
12
15
18
22
Series
6
8
10
12
15
18
22
M12×1.5
M14×1.5
M16×1.5
M18×1.5
M22×1.5
M26×1.5
M30×1.5
L
445-806-351
96-3208-0060
96-3210-0060
96-3212-0060
96-3214-0060
96-3216-0060
96-3220-0060
6
8
10
12
14
16
20
M14×1.5
M16×1.5
M18×1.5
M20×1.5
M22×1.5
M24×1.5
M30×1.5
S
d
Tee connectors
d1
96-3106-0060
444-808-351
445-810-371
96-3112-0060
96-3115-0060
96-3118-0060
96-3122-0060
d1
LL-series (extra light version)
L-series (light version)
S-series (heavy duty version)
25
Solderless pipe union with cutting-sleeve
acc. to DIN EN ISO 8434-1 and DIN 2353
Reducing connections
Reducing connections
8
10
10
12
12
12
15
15
15
15
18
18
18
18
18
22
22
22
22
22
22
96-1610-0060
96-1611-0060
96-1612-0060
96-1621-0060
96-1622-0060
96-1623-0060
96-1631-0060
96-1632-0060
96-1633-0060
96-1634-0060
96-1641-0060
96-1642-0060
96-1643-0060
96-1644-0060
96-1645-0060
96-1651-0060
96-1652-0060
96-1653-0060
96-1654-0060
96-1655-0060
96-1656-0060
8
10
10
12
12
12
14
14
14
14
16
16
16
16
16
20
20
20
20
20
20
LL-series (extra light version)
L-series (light version)
S-series (heavy duty version)
26
Series
LL
6
6
8
6
8
10
6
8
10
12
6
8
10
12
15
6
8
10
12
15
18
M14×1.5
M16×1.5
M16×1.5
M18×1.5
M18×1.5
M18×1.5
M22×1.5
M22×1.5
M22×1.5
M22×1.5
M26×1.5
M26×1.5
M26×1.5
M26×1.5
M26×1.5
M30×2
M30×2
M30×2
M30×2
M30×2
M30×2
L
6
6
8
6
8
10
6
8
10
12
6
8
10
12
14
6
8
10
12
14
16
M16×1.5
M18×1.5
M18×1.5
M20×1.5
M20×1.5
M20×1.5
M22×1.5
M22×1.5
M22×1.5
M22×1.5
M24×1.5
M24×1.5
M24×1.5
M24×1.5
M24×1.5
M30×2
M30×2
M30×2
M30×2
M30×2
M30×2
G 1/8 A
G 1/8 A
G 1/4 A
G 1/4 A
G 1/4 A
G 1/4 A
G 3/8 A
G 3/8 A
G 3/8 A
G 3/8 A
G 1/2 A
G 1/2 A
G 1/2 A
G 1/2 A
G 1/2 A
G 1/2 A
G 3/4 A
G 3/4 A
G 3/4 A
G 3/4 A
G 3/4 A
G 3/4 A
G1A
G 1A
G1A
G1A
G1A
G1A
G 1 1/4 A
G 1 1/4 A
G 1 1/4 A
G 1 1/4 A
G 1 1/2 A
G 1 1/2 A
G 1 1/2 A
G 1 1/2 A
G2A
G 1/4
G 3/8
G 1/8
G 3/8 A
G 1/2
G 3/4
G 1/8
G 1/4
G 1/2
G 3/4
G 1/8
G 1/4
G 3/8
G 3/4
G1
G 1 1/4
G 1/4
G 3/8
G 1/2
G1
G 1 1/4
G 1 1/2
G 1/4
G 3/8
G 1/2
G 3/4
G 1 1/4
G 1 1/2
G 1/2
G 3/4
G1
G 1 1/2
G 1/2
G 3/4
G1
G 1 1/4
G 1 1/2
31
32
28
36
40
43
22.5
36
41
44
24
24
36
46
49
53
26
26
41
51
55
57
29
29
29
47
57
59
32
32
52
60
36
36
36
58
62
l1
l2
S
Straight screw-in fitting
Order No.
Tube diam.
d1
d3
Series
96-0506-0060
96-0508-0060
96-0510-0060
96-0512-0060
96-0515-0060
96-0518-0060
96-0522-0060
6
8
10
12
15
18
22
M10×1
M12×1.5
M14×1.5
M16×1.5
M18×1.5
M22×1.5
M26×1.5
L
96-0606-0060
96-0608-0060
96-0610-0060
96-0612-0060
96-0614-0060
96-0616-0060
96-0620-0060
6
8
10
12
14
16
20
M12×1.5
M14×1.5
M16×1.5
M18×1.5
M20×1.5
M22×1.5
M27×2
S
96-0706-0060
96-0708-0060
96-0709-0060
96-0710-0060
96-0711-0060
96-0712-0060
96-0713-0060
96-0715-0060
96-0718-0060
96-0722-0060
6
8
8
10
10
12
12
15
18
22
G 1/8 A
G 1/4 A
G 3/8 A
G 1/4 A
G 3/8 A
G 3/8 A
G 1/2 A
G 1/2 A
G 1/2 A
G 3/4 A
L
1-0103-EN
96-1508-0060
96-1511-0060
96-1512-0060
96-1521-0060
96-1522-0060
96-1523-0060
96-1531-0060
96-1532-0060
96-1533-0060
96-1534-0060
96-1541-0060
96-1542-0060
96-1543-0060
96-1544-0060
96-1545-0060
96-1551-0060
96-1552-0060
96-1553-0060
96-1554-0060
96-1555-0060
96-1556-0060
d3
M10×1
M12×1
M12×1
96-3114-0058
96-3115-0058
96-3116-0058
96-3117-0058
96-3118-0058
96-3119-0058
96-3101-0058
96-3120-0058
96-3121-0058
96-3122-0058
96-3102-0058
96-3103-0058
96-3123-0058
96-3124-0058
96-3125-0058
96-3126-0058
96-3104-0058
96-3105-0058
96-3127-0058
96-3128-0058
96-3129-0058
96-3130-0058
96-3106-0058
96-3107-0058
96-3108-0058
96-3131-0058
96-3132-0058
96-3133-0058
96-3109-0058
96-3110-0058
96-3134-0058
96-3135-0058
96-3111-0058
96-3112-0058
96-3113-0058
96-3136-0058
96-3137-0058
d2
4
4
6
Tube diam.
d2
l1
d1
6
8
8
d1
d1
Tube diam. d1 Tube diam. d2
96-1406-0060
96-1408-0060
96-1410-0060
Order No.
d3
Order No.
d2
d3
d1
Sealing by sealing edge
Solderless pipe union with cutting-sleeve
acc. to DIN EN ISO 8434-1 and DIN 2353
Straight screw-in connectors
Straight connectors (tube to tube)
with Eolastic washer and EO2 function nut
with EO2 function nut
d
d1
d
d1
EOLASTIC washer
Order No.
l
Tube diam. d
1
471-004-191 )
471-004-311 1)
d1
G 1/8 A
M10×1
4
471-006-192
471-006-161
471-006-311
471-006-351
G 1/8 A
G 1/4 A
M10×1
M14×1.5
6
471-008-161
471-008-211
471-008-351
471-008-391
10
G 1/4 A
G 3/8 A
M10×1
M14×1.5
M18×1.5
471-012-161
471-012-211
471-012-391
12
G 1/4 A
G 3/8 A
M18×1.5
471-015-131
15
G 1/2 A
471-010-161
471-010-211
471-010-312
471-010-351
471-010-391
Tee connectors
with EO2 function nut
G 1/4 A
G 3/8 A
M14×1.5
M18×1.5
8
6
8
10
12
15
18
d
Order No.
474-506-061
474-508-081
474-510-101
474-512-121
474-515-151
474-518-181
Tube diam. d, d1
Order No.
d
476-006-001
476-008-001
476-010-001
476-012-001
476-015-001
Tube diam. d
6
8
10
12
15
1
) LL-series (extra light version)
Straight bulkhead connectors
Connectors for pressure gauges
with EO2 function nut
with EO2 function nut
d
d1
d
6 #
max. 16
Order No.
Tube diam. d
1-0103-EN
474-606-331
474-608-351
474-610-351
474-612-391
474-615-431
474-618-441
6
8
10
12
15
18
d1
< %g $
12.5
14.5
16.5
18.5
22.5
26.5
U^acdQTß Order No.
441-106-163
471-108-163
471-110-163
471-112-163
Tube diam. d
6
8
10
12
Max. operating pressure 315 bars
27
Solderless pipe union with cutting-sleeve
acc. to DIN EN ISO 8434-1 and DIN 2353
Reducing connectors
Screw plugs
473-806-351
473-806-391
473-808-371
473-808-392
473-810-391
Tube diam. d
6
6
8
8
10
l
d1
M14×1.5
M18×1.5
M16×1.5
M18×1.5
M18×1.5
d1
l
466-411-001
466-413-001
466-416-001
466-418-001
466-419-001
G
G
G
G
G
1A
/2 A
/4 A
3
/4 A
1
/8 A
16
14
12
16
7
466-431-001
466-435-003
466-439-001
M10×1
M14×1.5
M18×1.5
7
11
12
1
1
Vent plug
ød
d1
Cone plug
Order No.
d1
Order No.
ød
d1
d1
with EO2 function nut
l
l
Fig. 1
Order No.
Tube diam. d
6
8
10
12
Order No.
d1
l
Figure
466-431-006
466-431-005
466-431-009
M10×1
M10×1
G 1/8
7
7
7
1
2
2
1-0103-EN
460-706-001
460-708-001
460-710-001
460-712-001
Fig. 2
28
Accessories
Fixing bolts
Order No
d1
l
d2
DIN84-M3×5-4.8
DIN84-M5×8-4.8
DIN84-M5×16-4.8
DIN84-M5×20-4.8
DIN84-M6×16-4.8
DIN84-M6×20-4.8
DIN84-M6×25-4.8
M3
M5
M5
M5
M6
M6
M6
5
8
16
20
16
20
25
5.5
8.5
8.5
8.5
10
10
10
Order No.
d1
l
d2
b
WAF
Material
DIN912-M4×20-8.8
DIN912-M6×16-8.8
DIN912-M6×25-8.8
DIN912-M6×60-8.8
DIN912-M8×16-8.8
M4
M6
M6
M6
M8
20
16
25
60
16
7
10
10
10
13
14
18
18
18
12
3
5
5
5
6
steel
Material
S
38='#
steel
[
S!
38=( !
S
F05
Q
S!
[
Order No.
d1
l
b
WAF
Material
DIN931-M6×30-5.8
M6
30
18
10
steel
S
38=("
Q
S!
[
d1
l
d2
Material
DIN7513-BM4×20
DIN7513-BM4×25
DIN7513-BM5×10
DIN7513-BM6×16
DIN7513-BM6×25
M4
M4
M5
M6
M6
20
25
10
16
25
7
7
8.5
10
10
steel
38=&$ "
S
Order No.
[
S!
Nuts
Thread
DIN934-M5-8
DIN934-M6-8
DIN936-M14×1.5-5
DIN936-M16×1.5-5
DIN936-M20×1.5-5
M5
M6
M14×1.5
M16×1.5
M20×1.5
m
WAF
4
5
8
8
9
8
10
22
24
30
e
9.2
11.5
25.4
27.7
34.6
Material
T
Order No.
steel
\
F05
Lock washer
1-0103-EN
M5
M6
M8
M10
M12
M14
M16
M18
M20
d1
d2
s
5.3
6.4
8.4
10.5
13
15
17
19
21
9
10
13
16
18
22
24
27
30
0.6
0.7
0.8
1
1.1
1.2
1.3
1.5
1.5
h
Material
0.9
0.9
1.2
1.5
1.5
1.8
1.9
2.2
2.2
spring steel
d1
650-050
650-060
650-080
650-100
650-120
650-140
650-160
650-180
650-200
for bolt
d2
h
Order No.
s
29
Accessories
D
s
Fixing clips
b
d
l1
l2
s
602-001
604-001
606-010
608-001
610-001
612-001
2.5
4
6
8
10 or 1/8"
12
10
10
10
10
10
20
3.5
5.5
5.5
5.5
5.5
6.8
11.25
18.5
20.5
23.5
25.5
35
5
9
10
12
13
18
1.5
1.5
1.5
1.5
1.5
2
Order No.
for tube diam. for tube
øD
diam.
b
d
l1
l2
s
602-002
604-002
604-003
2.5
4
4
10
3.5
5.5
5.5
13.8
22.6
26.6
l2
b
for tube diam.
øD
d
l1
5
9
9
l2
1.5
b
2
2
3
s
D
Order No.
d
l1
b
d
l1
l2
s
608-003
8/4
10
5.5
34
12
1.5
4
9
l2
b
Order No.
D
D
for tube diam.
øD
d
l1
l2
s
604-004
606-014
608-004
610-004
12
14 or 1/4"
18 or 3/8"
20 or 1/2"
24
30
36
36
14
15
20
20
5.5
6.3
7
7
27
32.5
40
40
13
16
21
21
1.5
2
2
2
l2
d
30
4
4
4
4
6
6
6
6
6
8
8
8
8
8
10
10
10
10
4
5
6
8
2
3
4
5
6
2
3
4
5
6
2
3
4
5
for tube
b
d
l1
l2
s
5.5
5.5
5.5
5.5
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
42
46
50
58
39
45
51
57
64
43
51
59
68
76
45
55
67
77
30
34
38
46
27
33
39
45
52
31
39
47
56
64
33
43
55
65
1.5
1.5
1.5
1.5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
Material
l1
D
604-014
604-015
604-016
604-018
DIN 72573-2×6-ST
DIN 72573-3×6-ST
DIN 72573-4×6-ST
DIN 72573-5×6-ST
DIN 72573-6×6-ST
DIN 72573-2×8-ST
DIN 72573-3×8-ST
DIN 72573-4×8-ST
DIN 72573-5×8-ST
DIN 72573-6×8-ST
DIN 72573-2×10-ST
DIN 72573-3×10-ST
DIN 72573-4×10-ST
DIN 72573-5×10-ST
for tube diam.
diam.
mild steel
s
øD
l2
b
Order No.
d
l1
1-0103-EN
l1
s
d
D
c
c
b
b
Order No.
for tube diam. or
socket diam. of tee
øD
Accessories
Steel tubing
ø da
[mm]
Order No.
Steel pipe galvanized, Cr-6-free
WV-RO6×0.7 VERZI
6 ±0.05
WV-RO8×0.7 VERZI
8 ±0.05
WV-RO10×0.7 VERZI
10 ±0.05
r
Permissible
oper. pressure 2) Burst pressure
[bar]
[bar]
s
[mm]
ø di
[mm]
0.7
0.7
0.7
4.6 ±0.11
6.6 ±0.11
8.6 ±0.13
12
320
850
19
27
230
180
675
550
2.6 ±0.10
2 ±0.15
4 ±0.12
6 ±0.10
8 ±0.08
9 ±0.10
12
368
952
12
18
24
30
36
500
372
288
248
303
1 360
963
723
612
765
0.5
1.5 +0.05
7.5
386
1 664
1
1
1
1
2
4
6
8
12
18
24
30
466
347
269
231
2 080
1 473
1 105
936
Steel pipe acc. to EN10305-4, galvanized, Cr-6-free
0.7
982-120-041
4 ±0.05
1.0
982-120-040
4 ±0.08
982-120-060
6 ±0.08
1.0
982-120-080
8 ±0.08
1.0
982-120-100
10 ±0.08
1.0
1.5
982-120-120
12 ±0.08
Stainless steel pipe (material 1.4571)
D1127RO2.5x0.5+A46
2.5 ±0.03
DIN2462-RO4×1+A46
4 ±0.1
DIN2462-RO6×1+A46
6 ±0.1
DIN2462-RO8×1+A46
8 ±0.1
DIN2462-RO10×1+A46
10 ±0.1
Minimum
bend
radius r 1)
[mm]
±0.2
±0.2
±0.2
±0.2
ød
s
ø di
Temperature range –25 to +80 °C
1)
2)
For cold bending with bending device or by hand with grooved disk.
Dynamic load according to DIN 2413
Tube bending device
This device contains all parts needed to bend tubes with a 4, 6, 8 and 10 mm outside diameter. Thin-walled steel tubes with a 10 mm outside diam.
may be slightly flattened at the outer bend, but that is not essential with regard to strength or reduction of cross section.
Inner bending radius tube
tube
tube
tube
4 mm outside tube diam.: 10 mm
6 mm outside tube diam.: 16 mm
8 mm outside tube diam.: 22 mm
10 mm outside tube diam.: 27 mm
"#"
Back stop
Back stop
50
66
Bending lever
1-0103-EN
&
Order No. 248-803.20
There is a special grooved disk for the bending tube with 12 mm o.d, order No. 248-803.17
Tapped holes for
displaceable back stops
in accordance with tube
diameter.
50
For older bending devices a retrofitting set for the bending tube with 4 mm is available, order No. 248-803.16
31
Accessories
Plastic tubing
WVN715, without plasticizer
Order No.
1)
WVN716, flexible (containing plasticizer)
s
WVN715-RO2.5×0.5
WVN715-RO4×0.85
WVN715-RO6×1
WVN715-RO6×1.25
WVN715-RO8×1.25
2.5
4
6 ±0.1
6
8
0.5
0.85
1
1.25
1.25
WVN715-RO10×1.5
WVN715-RO12×1
WVN715-RO12×1.5
10
12 ±0.15
12
1.5
1
1.5
WVN716-RO4×0.85
WVN716-RO6×1.25
WVN716-RO8×1.25
4
6 ±0.1
8
0.85
1.25
1.25
2)
Perm.
operating
press. 3)
[bar]
Burst
press.
[bar]
r
ø da
+0.15
ø di –0.05
Smallest permissible
bending radius r bent
freehand
with fixture
1.5
2.3
4
3.5
5.5
7
10
9
25
38
63
63
76
9
14
21
21
28
66
72
53
70
49
198
216
159
210
147
89
110
110
35
45
45
47
24
38
141
72
114
38
63
80
14
21
30
36
35
25
108
105
75
2.3
3.5
5.5
ød
Color: natural colors, black lettering. Tubing available in green, red, black or brown on request.
Tubing with other dimensions or also filled with NLGI grade 2 grease or fluid grease on request.
s
ø di
Important note: For screwed tubing joints only use unions with reinforcing sockets!
Material WVN715: PA 12 H: polyamide 12, semirigid, unplasticized as per DIN 73378, stabilized against heat and aging.
(black tubing) PA 12 HL: polyamide 12, semirigid, unplasticized as per DIN 73378, stabilized against light, heat, and aging.
Material WVN716: PA 12 PH: polyamide 12, flexible, containing plasticizer as per DIN 73378, stabilized against heat and aging.
(black tubing) PA 12 PHL: polyamide 12, flexible, containing plasticizer as per DIN 73378, stabilized against light, heat, and aging.
Material properties:
- very good resistance and insensitivity to oils, greases, lubricants, all fuels, chlorinefree detergents and solvents.
- At room temperature good resistance to diluted mineral acids, organic acids, bases and saline solutions 4)
- inappropriate for concentrated mineral acids, concentrated acetic acid, phenols, cresols, chlorinated hydrocarbons, chlorine, acetones and ketones.
Permissible operating temperature: approx. –60 °C to +80 °C
1)
2)
3)
The desired length. e.g. 50 meters, has to be added to the order No. Order example: WVN716RO6x1.25x50M
These minimal radii can be produced with the help of appropriate bending devices.
The tubing has to be heated to 150 °C for this purpose. The maximum duration of heating is 20 seconds.
20 ·  · s (rated)
V
The operating pressures were determined by using DIN 73 378 acc. to the formula P = ––––––––––––––
.
dm
s = rated wall thickness [mm];
dm = da – s;
 = reference tension N/mm2 at 23 °C
V
At higher temperatures the pressure drops in keeping with the pressure efficiency as per DIN 73378.
Temperature ra [°C]
up to 30
up to 40
up to 50
up to 60
up to 70
up to 80
In borderline cases it is advisable to contact SKF Lubrication Systems.
1-0103-EN
4)
Pressure efficiency [%]
83
72
64
57
52
47
32
Accessories
The end of the tubing
is provided with
a claw groove for
quick connectors
Hoses
"
for main lines, operating pressure: 45 bars (for short time only)
S
Order No.
2)
714-...(-VS)
716-...(-VS)
718-...(-VS)
Material:
2)
Order No.
Order No.
714-...-K
716-...-K
718-...-K
714-...-M(-VS)
716-...-M(-VS)
718-...-M(-VS)
With tapered
sleeve and
socket union
on both ends
Tube
diam.
Thread
Rubber
Metalbraided
Max.
increase
in volume
at ≈ 80 bars
Order No.
d1
d3
d2
d4
[cm³/m]
714-...-MK
716-...-MK
718-...-MK
4
6
8
M8×1
M10×1
M14×1.5
11
13
15
12 ±0.5
14 ±0.8
16 ±0.8
2.5
3.6
4.4
Metalbraided
With tapered
sleeve and
socket union
on both ends
;,>aSTa[T]VcW
Standard
A\
X]
,
Hose: mineraloilresistant CR rubber inside; 2 layers of braided rayon;
outside rubber conditionally oilresistant, resistant to light cracks and ozone.
Metal braid: galvanized steel wire; tube ends: galvanized steel tubing.
!
S!
S#
$g
S!
for secondary lines, operating pressure 15 bars (for short time only)
"
Standard
With tapered sleeve and
socket union on both ends
Tube
diam.
Thread
Rubber
Order No.
Order No.
Order No.
d1
d3
d2
734-...3)
734-...-VS
4
M8x1
8.8
Socket union
S"
With claw groove for
quick connectors
Material:
3)
734-...-K
3)
Double tapered
sleeve
Hose: oilproof rubber inside and outside with a layer of braided rayon
Tube ends: steel tubing
The ends of the tubing are bonded to the hose and cannot be detached.
Permissible operating temperature: –30 °C to +70 °C
1)
Order length in mm; other lengths available.
Standardized lengths ±5 mm with ø 4 tubing: 180, 220, 260, 300, 380, 420, 450, 500, 580
with ø 6 tubing: 220, 300, 340, 380, 420, 500, 580
with ø 8 tubing: 340, 450, 580
Order examples:
Standard with socket unions and tapered sleeves, ø4 tubing, 300 mm lang, order No.: 714-300-K
Standard,
ø4 tubing with claw grove for quick connectors, 300 mm long, order No.: 714-300-VS
Metal-braided,
ø6 tubing, 420 mm lng, order No.: 716-420-M
Metal-braided,
ø8 tubing, with claw grove for quick connectors, 450 mm long, order No.: 718-450-M-VS
For Version with claw groove on ends of tubing for quick connectors, order No.: ...-VS
3)
Important note: To avoid damages do not use these hoses as main lines but only to connect
distributors to lube points.
1-0103-EN
2)
33
Accessories
Hoses suitable for self-installation, operating pressure 45 bars
➀
Tube Male body
diam.
d1
Order No.
4
6
8
1)
2)
406-704-001(-VS)
406-706-001(-VS)
406-708-001(-VS)
2)
2)
➂
Hose
Order No.
WAF
2)
➁
Shell
406-804-001
406-806-001
406-808-001
8
10
13
WAF
14
17
19
Order No.
Hose
diam.
d2
1)
WVN701-4
WVN701-6
WVN701-8
11
13
15
The end of the tube is
provided with a claw
groove for quick
connectors
Increase
in volume
at ≈ 40 bars
[cm³/m]
S
➀
F05
1
1.4
1.4
Please quote length when ordering. Max. length available 20 m.
For Version with claw groove on ends of tubing for quick connectors, order No.: ...-VS
➁
Material:
Hose: Perbunan, resistant to mineral oils, with two layers of braided rayon
Male body: steel, galvanized
Shell: brass
F05
Permissible operating temperature: –40 °C to +100 °C
Installation instructions
a) Apply thin film of oil to thread and inside of hose of parts ➀ ➁ ➂ to be connected.
b) Clamp shell ➁ in vise and screw in hose ➂ by turning it to the left up to the stop.
➂
S!
c) Important note: To avoid damages screw in male body ➀ with a wrench up to the stop. Do not tighten!
Order No.
Tube
diam.
ø d1
SLH6-180
SLH8-180
SLH10-180
6
8
10
1
)
Hose
diam.Length 1)
ø d2
l+5
10.9
13
14.5
180
180
180
l1
Permissible
operating pressure
Rmin
[bar]
Burst
pressure
[bar]
22
30
30
19
32
44
900
830
690
225
210
175
l1
High pressure hoses, operating pressure: 280 – 330 bars
d1
Order length in mm; other lengths available.
Order example: highpressure hose SLH8, 600 mm long, order No.: SLH8-600
Material:
d2
in
Rm
Inner liner: PA 11/12 or PE-E
Reinforcement: 1 braided layer of synthetic fibre with high tensile strength
Outer cover: PA 11/12
l
Resistant to mineral oils.
Permissible operating temperature: –40 °C to +100 °C
1-0103-EN
l1
34
Accessories
High pressure hoses for self-installation
Q
A'
(
The end of the tubing is
provided with a claw
groove for quick connectors
(
ß %
;
%
*) Take length of engaged thread and double it when determining the length of the hose.
Order No.
➀
982-750-091
982-750-091+AF2
➃
!'
(
Designation
➁
➂
F05 F05 !
The end of the tubing
is provided with a claw
groove for quick
connectors
ß"
ß#
P
ß'&$
for main line for tube diam. 6 (NW4) (connection: pump – feeder) and secondary lines (connection: feeder – lubrication point)
High press. hose, max. length supplied 50 m
High press. hose, max. length supplied 50 m
filled with NLGI grade 2 grease
Sleeve
Tube stud, straight
Tube stud, 45° angle
Tube stud, 90° angle
L
853-540-010
853-370-002(-VS) 1)
853-380-002(-VS) 1)
853-390-002(-VS) 1)
853-380-004(-VS) 1)
853-380-003
853-380-003-VS 1)
853-390-003(-VS) 1)
a
Technical data:
Hose: operating pressure: 325 bars
burst pressure: 800 bars
min. bending radius: 35 mm
b
Material
Hose: Inner lining: unplasticized polyester
Inner layer: braided synthetic fibers
Outer cover: weatherproof polyurethane
Sleeve, tube stud: steel, galvanized
20
30
66
2
2
13
21
35
47
Permissible operating temperature: –30 °C to +70 °C
1
) Version with claw groove on ends of tubing for quick connectors, order No.: ...-VS
(
F05 &

"$
F05 $
%
ß$

"
(
(
*)

ß

ß%#

ß'
for main line for tube diam. 8 (NW6) (connection: pump – feeder) and secondary lines (connection: feeder – lubrication point)
!
Take length of engaged thread and double it when determining the length of the hose.
Designation

➁
➂
High press. hose, max. length supplied 50 m
High press. hose, max. length supplied 50 m
filled with NLGI grade 2 grease
Sleeve
Tube stud, straight
Tube stud, straight
Tube stud, 45° angle
Tube stud, 90° angle
Technical data
Hose: operating pressure: 280 bars static / 210 bars dynamic
burst pressure: 840 bar
min. bending radius: min. 50 mm
Material
Hose: Inner lining: unplasticized polyamide
Inner layer: braided synthetic fibers
Outer cover: weatherproof polyurethane, black
Sleeve, tube stud: steel, galvanized
Order No.
982-750-111
982-750-111+AF2
406-808-005
406-708-005
406-708-007
406-708-009
406-708-008
Permissible operating temperature: –30 °C to +70 °C
""
""
*) Take length of engaged thread and double it when determining the length of the hose.
Designation
1-0103-EN

➁
➂
High press. hose, max. length supplied 100 m
High press. hose, max. length supplied 50 m
filled with NLGI grade 2 grease
Sleeve
Tube stud, straight
Order No.
WVN711-10
WVN711-10+AF2
406-810-002
406-710-002
""
F05!!
#
F05 !
!
ß%
ß ß&(
ß %(
for main lines for tube diam. 10 (NW8) (connection: pump – feeder)
!"
Technical data
Hose: operating pressure: 130 bars
burst pressure: 315 bars
min. bending radius: 55 mm
Material
Hose: Inner lining: Perbunan
Inner layer: diagonally woven synthetic fibers
Outer cover: weatherproof neoprene
Sleeve: aluminum
Tube stud: steel, galvanized
Permissible operating temperature: –40 °C to +100 °C
35
Accessories
Rotating joints
d1
d2 *)
4
4
6
G 1/8 A
M8x1
M10x1
M8×1
M8×1
M10×1
[rpm]
Max. pressure
oil
air
[bar]
[bar]
WAF14
14
9
Max. Speed
7.4
Order No.
Tube
outside
diam.
16
38
d2
Rotating joints connect fixed tubing with oscillating and rotating machine parts.
d1
100
30
8
15
401-504-192
401-504-292
401-506-313
22
Flow media: mineral oils, oiled compressed air
30
Order No.
405-549-049
405-551-049
M8x1
1)
Banjo fitting, rotable
Tube
outside diam.
d1
4
4
M8×1 tap.
M10×1 tap.
d1
!%
DLY930-2
DLY931
8
air
d1
[rpm]
[bar]
[bar]
G 1/4 A
R 1/8 tap.
1400
20 1)
8
F05 &
ß"
F05 &
!
Flow media: mineral oils, oiled compressed air
S
1
Max. pressure
[bar]
1400
5
'
Max. speed
[rpm]
%
< ¾
$
"
Tube
outside diam.
A #cP_
) 30 bars in singleline centralized lubrication systems for a short time.
Order No.
!$
Order No.
Max. pressure
oil
#'
Max. speed
Tube outside
diam.
< #¾ $
(
F05!#
DLY932
6
F05 #
"!
!
Flow medium: mineral oil
< #¾ $
10
Flow medium: mineral oil
The rotating joint is also available with nut DIN936M22×1.5 and spring washer DIN137-B22.
*)
36
Ports tapped for solderless tube connection
F05!&
Q
P
F05 &
< #¾ $
<!!¾ $
1-0103-EN
20
%
Part a rotating in part b
F05!!
!($
8
Max. pressure
[bar]
&
408-120
Max. speed
[rpm]
%&
Order No.
Tube outside
diam.
Accessories
Pressure gauges
Indication range
248-602.25
169-102-506
248-602.20
169-104 008
169-106-004
0–10
0–25
0–40
0–40
0–60
bars
bars / 0–360 psi
bars
bars
bars
F05 #
for grease
for oil
!&
Order No.
&$
#
Fixed by means of a double tapered sleeve and socket union (solderless tube connection)
in counterbore acc. to DIN 3854/DIN 3862.
ß'
Order No.
Indication range
169-101-004
169-102-020
169-104-020
169-106-020
169-110-020
169-116-000
169-125-020
0–10 bar
0–25 bar / 0 – 363 psi / 0-2.5 Mpa
0– 40 bar / 0 – 580 psi / 0-4 Mpa
0– 60 bar / 0 – 870 psi / 0-6 Mpa
0–100 bar / 0 – 1450 psi / 0-10 Mpa
0–160 bar
0–250 bar / 0 – 3625 psi / 0-25 Mpa
Adaptor
Order No.
d
301-134
301-034
M10×1
M14×1.5
''
%"
<?P
_bX
QPa
F05 #
6 #0
Washer, order No. 248-610.02, must be ordered separately for every pressure gauge.
%"
Damped version with glycerine filling
169-102-015
169-104-015
169-106-015
169-110-015
169-125-015
169-140-001
0–25 bar / 0 – 363 psi / 0-2.5 Mpa
0– 40 bar / 0 – 580 psi / 0-4 Mpa
0– 60 bar / 0 – 870 psi / 0-6 Mpa
0–100 bar / 0 – 1450 psi / 0-10 Mpa
0–250 bar / 0 – 3625 psi / 0-25 Mpa
0– 400 bars
<?P
_bX
QPa
Mounting position
%
Indication range
m
Order No.
vertically
6 #
F05 (
Washer, order No. 248-610.02, must be ordered separately for every pressure gauge.
Version with visualization
Order No.
Indication range
Mounting position
169-101-607
169-104-011
169-106-011
169-110-010
0–16 bars / 0–1.6 MPa
0–40 bars / 0–4 MPa
0–60 bars / 0–6 MPa
0–100 bars / 0–10 MPa
vertically
1-0103-EN
Washer, order No. 248-610.02, must be ordered separately for every pressure gauge.
m'#
m%"
F05 #
6 '0
37
Accessories
Shut-off valves
F05%
F05 &
F05 (
Max. pressure
[bar]
Max.
temperature [°C]
Spindleway
202-085-S
60
80
max. 3 revs.
#$
m%#
< ¾
Order No.
(
Direction of flow optional
F05 #
!
Max. pressure
[bar]
Max.
temperature [°C]
161-600-036
16
90
6 #
Order No.
!&$
< #¾ $
*)
5!
F0
#
Ports tapped for solderless tube connection
Quick-disconnect couplings
Coupled
Coupling, complete
Order No.
Tube
diam.
207-168-2
207-188-2
6
8
S
d1 *)
l2
M10×1
M14×1.5
62
66,5
Flow
direction
F05!!
[!
[
optional
Outer coupling member
6
8
F05 &
l1
< #g $
48.5
53
Pressure loss as a function of the
flow rate based on an operating
oil viscosity of 140 mm2/s
Inner coupling member
Both coupling members are shut off when disconnected!
*)
38
"
207-168.U2
Ports tapped for solderless tube connection
Pressure loss
p (bar)
Order No.
!
!
Flow rate (l/min)
"
#
$
1-0103-EN
207-168.U7
207-188.U11
Tube
diam.
(
Order No.
Accessories
Relief valves
These valves are installed in distributor systems fitted with a pump without pressure
relief equipment, mainly in the main line downstream from the pump.
M10×11)
79
T
G /
A
202-275-2
50
Order No. 202-275-2
1 4
14
With longer main lines and high viscosity oils, the pressure relief time, which influences the
reversing of the distributors, can become too long. The installation of the second relief valve at a
suitable position in the main line, e.g. at half the main line length, may remedy this problem.
0
P
Check valve = residual pressure valve 0.5 bar
G 1 /4
10
?
C
20
A
= Outlet
P
= Inlet
T (R) = Return
30
Relief valve with bleed valve and safety valve
Order No. 202-175-30
Adaptors
*)
for tube diam. 6: Order No. 406-054
for tube diam. 8: Order No. 301-020
for tube diam. 10: Order No. 410-163
A2
40
Fitted to reservoir
Bleed valve
A2
Relief valve
1A
12
27
ø6
60
Safety valve
30 bars
84
80
48
M14x1.51)
A1
For P and R
two adapters each 408-160
washers
508-108
R
P
0 0!
16
29
G 1/4
25
43
A
67
?
1-0103-EN
Check valve =
residual pressure valve 0.5 bar
*)
Ports tapped for solderless tube connection
39
Accessories
Safety valves, adjustable (poppet valve)
Hydraulic characteristics
80 °C
20 to 1000
NBR
NBR
FKM (FPM)
NBR
FKM (FPM)
NBR
NBR
FKM (FPM)
R
A
106
40
40
40
40
40
40
70
70
71
6
12
12
25
25
35
60
60
General characteristics
49.5
to
to
to
to
to
to
to
to
35.5
see
pressureloss
parameter
1
3
3
4
4
4
12
12
Seal
21.5
WVN200-10E6
WVN200-10E12
WVN200-10E12-S8
WVN200-10E25
WVN200-10E25-S8
WVN200-10E35
WVN200-10E60
WVN200-10E60-S8
Oil
Viscosity
temperature range
max.
mm2/s
G1/4
Order No.
Adjustable Operating
pres. range pres. max.
[bar]
[bar]
G1/4
Rated
flow rate
[l/min]
40
0
Design:
poppet valve with hydraulic cushioning
directly controlled
Lubricant:
oil
Connecting thread: G 1/4
Mounting position: optional
ø6.6
8
25
Setting screw
A
Adaptors *)
Pressure loss parameter
4
for valves
for tube diam. 8: Order No. 301-020
for tube diam. 10: Order No. 410-163
for tube diam. 12: Order No. 412-163
2 /s
140
1
/s
mm
Washer:
Order No. 508-108
for valve
0
2
4
6
8
WVN200-10E60
for tube diam. 8: Order No. 408-403W
for tube diam. 10: Order No. 410-403W
Washer:
Order No. 508-108
10
Flow rate Q [l/min]
With increasing flow rate, the pressure upstream from
the valve will also rise in accordance with the curves.
Washer
508-108
If installed on a reservoir,
use two special adapters 408-160 with
long tube ends.
*)
M14x1,5
for tube ø8
Ports tapped for solderless tube connection
VPM-RV4
VPM-RV
VPM-RV8
VPM-RV10
4
6
8
4
6
8
10
1
Presure,
max.
[bar]
Series
6
Opening
pressure
[bar]
G
R /8 tap.
R 1/8 tap.
R 1/8 tap.
10
10
10
100
315
315
LL
L
L
M10×1 tap.
M10×1 tap.
M10×1 tap.
M10×1 tap.
10
10
10
10
100
315
315
315
LL
L
L
L
VPKG-RV
6
R 1/8 tap.
3
100
LL
VPKM-RV-S3*
VPKM-RV-S4
6
6
M10×1 tap.
M10×1 tap.
3
2
100
100
LL
LL
CdQTßS
VPG-RV
VPG-RV6
VPG-RV8
Tube
diam. d1
With cutting sleeve
and union nut
* Stainless steel
Check valves for quick connectors, see page 21.
40
LL-series = extra light version, L-series = light version
6
Order No.
CdQTßS
Check valve (Kugelventile)
1-0103-EN
2
m
m
16
2
0
95
min. 1,5
max. 5
Pressure loss p [bar]
3
WVN200-10E6 to
WVN200-10E35
Accessories
Safety valves, (ball valves) for flow rates from 0.5 to 2 l/min
$
Order No.
WVN200-6B0.5
WVN200-6B3
WVN200-6B8
WVN200-6B12
WVN200-6B16
WVN200-6B20
WVN200-6B40
Tube
diam.
6
0.4
04
M10×1
Opening pressure
[bar]
Marking
marking
d1 *)
l1
WAF
61
14
0.5
3
8
12
16
20
40
05
3
8
12
16
20
40
M10×1
0
3
5
12
16
20
32
M14×1.5
71
17
[
F05
WVN200-8B0
WVN200-8B3
WVN200-8B5
WVN200-8B12
WVN200-8B16
WVN200-8B20
WVN200-8B32
8
0.04
3
5
12
16
20
32
WVN200-10B0
WVN200-10B0.5
WVN200-10B1
WVN200-10B32
10
0.04
0.5
1.2
32
0
05
12
32
M16×1.5
80
19
161-212-054 1)
8
20
20
M14×1.5
84.5
17
) This valve is designed as a plunger valve. Because of this design it can also be used for regulating tasks,
whereas the ball valves should be used as safety valves..
WVN200-10D120-S1
WVN200-10D220-S1
Opening pressure
[bar]
Marking
[
l1
8
50
75
120
220
50
75
120
220
84
10
120
220
120
220
87
F05 &
S
WVN200-8D50
WVN200-8D75
WVN200-8D120
WVN200-8D220
Tube
diam. d
!
Order No.
S
1
<'g cP_
6
M8×1
S
WVN200-4A0.4-S1
04
5
8
12
16
25
%
4
0.4
5
8
12
16
25
&#
F05 #
d1 *)
S
WVN200-4A0.4
WVN200-4A5
WVN200-4A8
WVN200-4A12
WVN200-4A16
WVN200-4A25
Opening pressure
[bar]
Marking
!
Tube
diam.
S
Order No.
F05 &
1-0103-EN
Cutting sleeve screw unions according to DIN 2353
*) Ports tapped for solderless tube connection
41
Accessories
Oil reservoirs – plastic
Plastic reservoirs
Level
indicator WS
Type of contact
Seal
material
K1
KW1
KW1-S2
1
–
for min. filling level
for min. filling level
–
NC
NC
NBR
K3-S2
KW3-S1
KW3-S3
KW3-S5
3
–
for min. filling level
for min. and max. filling level
for min. filling level with advance warning
–
changeover
1 NC, 1 NO
NBR
6
–
for
for
for
for
–
changeover
2 NCs
changeover
NBR
filling
filling
filling
filling
level
level with advance warning
level
level with advance warning
"
NBR
NBR
NBR
FKM (FPM)
! !
%
(
(
"g'$
5X[[Tab^RZTcfXcWbRaTT]
%%
ß
min.
min.
min.
min.
K6-S5
KW6-S1
KW6-S2
KW6-S81
KW6-V57
"
Reservoir
capacity [liters]
Order No.
&
"$
!#&
ATcda]6!
ß'$!g
$
!$
FB
"
'
< #g $ "%
≈!
%(
U^acdQTSXP\ < %g $ &
1-liter reservoir (shown: KW1)
U^acdQTSXP\ 3-liter reservoir (shown: K3-S2)
!(
#$
5X[[Tab^RZTcfXcWbRaTT]
FB
"g'$
!
!!'
!#"
!'
'"
U^acdQTSXP\ 1)
42
6-liter reservoir (shown: KW6-S1)
Ports tapped for solderless tube connection to DIN 2367
('
&'
1-0103-EN
< %g $
Accessories
Oil reservoirs – metal
Metal reservoirs
Reservoir
capacity [liters]
Seal
material
3
–
for min. filling level
for min. filling level
–
changeover
changeover
NBR
FKM (FPM)
NBR
6
–
for min.
for min.
for min.
for min.
for min.
for min.
–
2 NCs
2 NCs
changeover
1 NO, 1 NC
1 NO, 1 NC
changeover
NBR
NBR
NBR
FKM (FPM)
NBR
NBR
NBR
and max. filling level
filling level with advance warning
filling level
filling level with advance warning
filling level with advance warning
filling level
Filler socket with screen
220
~ 216
110
~ 267
WS
WS
140
9
222,5
B7
BW7-S6
BW7-S7
BW7-S8
BW7-S11
BW7-S12
162-310-005
Type of contact
141
B3-S1
BW3-S81
162-210-005
Level
indicator WS
165,5
Order No.
44
ø9
ø10
ø11
ø7
27
300
19
128
6
G1/2
23
320
3-liter reservoir
280
6-liter reservoir (shown: BW7-S6)
Oil level gauges for metal reservoir
Reservoir
capacity [liters]
l
l1
152
190
215
279
305
127
165
190
254
280
6
6
15 and 30
50
100
F05 (
< !
1-0103-EN
995-003-044
995-003-040
995-003-041
995-003-042
995-003-043
[
[
Order No.
Type: NBR
FKM (FPM) on request
!%
!($
43
Accessories
Filler coupling for oil and fluid grease
Coupling plug
Order No.
Fig.
øA
L
Respective
dust cover
Order No.
995-001-501
995-001-502
995-000-705
995-001-260
1
1
2
3
G 1/4
G 1/2
G 1/4
G 1/2
57.5
82
–
83
995-001-503
995-001-504
–
–
Respective
coupling socket
Order No.
995-002-073
995-001-950
995-001-500
–
(83)
øA
øA
ø25
øA
71
11
12
14
L
Fig. 1
Fig. 2
Fig. 3
Topping-up pumps
Order No.
Medium
Operating
Trolley
169-000-004
169-000-012
169-000-016
169-000-056
15
10
20
25
NLGI 1,2
manually operated
no
–
169-000-082
169-000-084
25 / 50
25
00/000
00/000
manually operated
manually operated
yes
yes
Fig.
169-000-042
169-000-054
25
50
NLGI 1,2
manually operated
yes
–
169-000-342
169-000-018
25
25
NLGI 1,2
00 to 2
manually operated
pneum. operated
no
yes
–
max. 450
max. ø350
635
Drum (kg)
1-0103-EN
Fig.
44
1-0103-EN
Notes
45
Notes
46
1-0103-EN
Important information on product usage
SKF and Lincoln lubrication systems or their components are not approved for use with gases,
liquefied gases, pressurized gases in solution and fluids with a vapor pressure exceeding normal
atmospheric pressure (1 013 mbar) by more than 0,5 bar at their maximum permissible
temperature.
!
Additional brochures for further information
1-0116-EN
1-9201-EN
SKF Lubrication Systems Germany GmbH
Berlin Plant
Motzener Str. 35/37 · 12277 Berlin
PO Box 970444 · 12704 Berlin · Germany
Filters
Transport of Lubricants in Centralized Lubrication Systems
This brochure was presented to you by:
Tel. +49 (0)30 72002-0
Fax +49 (0)30 72002-111
® SKF is a registered trademark of the SKF Group.
© SKF Group 2016
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can
be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.
1-0103-EN · July 2016
This publication supersedes publication 1-0103-1-EN.
skf.com/lubrication