Double Ferrule Compression Fittings Fluid control division DOUBLE FERRULE COMPRESSION FITTINGS ✔ G ENERAL ✔ H OW INFORMATION TO ORDER ✔ P RODUCTS INDEX 2 4 5 PIPE FITTINGS ✔ G ENERAL ✔ H OW INFORMATION TO ORDER ✔ P RODUCTS INDEX 38 39 39 DOUBLE FERRULE COMPRESSION FITTINGS GENERAL INFORMATION BULK manufactures high quality compression and pipe fittings in various materials for any application requiring reliable tube connections with pressure tight sealing. BULK compression fittings are designed, manufactured, sold and serviced by experienced instrument specialists understanding and respecting the need of reliable performance. Construction material BULK compression fittings have all components made by the same material as the fitting body for thermal compatibility and corrosion resistance. Standard construction materials are listen on table 2 section “how to order”. It is recommended that the tubing and fitting be of same material to allow positive sealing and to avoid galvanic corrosion. Pressure and temperature rating BULK compression fittings are rated for working pressure higher than the tubing, therefore pressure rating depends on choice of tubing which should be based on material, wall thickness and temperature (see table below). Degrating factors must be used to determinate tubing working pressure at high temperatures. Please consult us if in doubt ! maximum allowable working pressure for fractional size tubing (value in psi) tubing O.D. tubing wall thickness (inch) (inch) 0.010” 0.012” 0.016” 0.020” 0.028” 0.035” 0.049” 0.065” 0.083” 1/16” 6.852 8.395 11.510 14.395 1/8” 6.843 9.948 12.622 3/16” 4.345 6.342 8.145 11.760 1/4” 4.575 5.910 8.700 11.773 3/8” 3.770 5.465 7.520 1/2” 2.770 3.980 5.415 7.155 5/8” 3.130 4.240 5.550 3/4” 2.570 3.490 4.535 7/8” 2.190 2.948 3.845 1” 2.568 3.318 0.095” 0.109” 0.120” 6.480 5.270 4.443 3.843 6.150 5.180 4.462 4.970 maximum allowable working pressure for metric size tubing (value in bar) tubing O.D. (mm) 0.5 3 492 6 8 10 12 16 18 22 25 0.6 610 0.8 825 382 281 220 180 1.0 1.030 495 357 278 235 170 148 121 104 tubing wall thickness (mm) 1.2 1.5 1.6 1.8 2.0 2.2 2.5 3 603 441 342 280 203 178 145 125 360 313 250 218 398 350 278 243 458 400 320 278 561 495 392 339 775 560 438 360 259 231 186 160 909 603 471 384 278 245 201 175 438 315 278 223 194 Tables are based on the following conditions: AISI 304 and AISI 316 stainless steel annealed seamless tubing ASTM A-269 or A-213 or equivalent. Tensile strength 75,000 psi at room temperature - Safety factor 4 (75,000 psi: 4 = 18,700 psi) Metal temperature between –20° to 100° F, –29° to 38°C - Reference ANSI B31.3 2 DOUBLE FERRULE COMPRESSION FITTINGS GENERAL INFORMATION ➂ ➃ ➁ ➀ BULK compression fittings are made by four parts consisting of body (1), nut (2), front ferrule (3), back ferrule (4). The bodies of fitting for metric tubes are provided with a collar on the tube end side to differentiate from inch tube fitting. Reference standard is BS 4368 : Part IV 1984. Assembly instruction 1) Loosen the nut (2) 2) Fully insert the tubing into the fitting. Make sure that the tubing rests firmly on the shoulder of the fitting and that the nut (2) is finger tight. 3) Tighten the nut (2) one and one quarter turns. Reassembly instruction 1) Firmly insert the tubing end with the previously set ferrules (3)(4) into the fitting body (1) and tighten the nut (2) to a hand tight condition. 2) Tighten the nut until a sharp rise in torque is felt with a wrench 3) Snug with wrench BULK compression fittings may be disconnected and retightened repeatedly. Safety Guidelines 1) Never tight or loose a fitting with pressure in the system. 2) Do not bleed the system by loosing the fitting or fitting nut. 3) Always use proper thread lubricants and sealants (suitable to temperature system) on tapered pipe threads. 4) Always leave a length of straight tube between the tube bend and the fitting. 5) Always use a tube insert when assembling fitting to plastic tubing 6) Bulk does not recommend interchanging its fitting components with other manufacturers’. 7) Tubing must always be softer than the fitting material (RB 80 maximum for stainless steel). 8) Careful selection, handling and installation of tubing have vital importance to install safe and leak-free system. 9) Contact your local Bulk distributor for further informations. 3 DOUBLE FERRULE COMPRESSION FITTINGS GENERAL INFORMATION HOW TO ORDER Special executions, select the suffix from TAB. 3 Material, select the suffix from TAB. 2 Type of fitting Type of threads, select the suffix from TAB. 1 Pipe size expressed in sixteenths of an inch (for example 3/8” = 6) Tubing outside diameter, inch sizes are expressed in sixteenths of an inch (for example 1/4” = 4) Select M for metric size tubing or P for inch size tubling TABLE 1 NO SUFFIX = NPT ANSI B1.20.1 TABLE 2 K = BSPP ISO 228/1, BS 2779, DIN 3852 Form A W = BSPP ISO 228/1, BS 2779, DIN 3852 Form B NO SUFFIX = 316 J = BSPT ISO 7/1, BS 21, DIN 2999 L = 316L O = BRASS MO = MONEL TABLE 3 FB = Connector for thermocouple Z 4 = Fittings cleaned for oxigen service TI = TITANIUM H = HASTELLOY I = INCONEL DOUBLE FERRULE COMPRESSION FITTINGS MALE CONNECTOR 6/7 DM FEMALE CONNECTOR 8/9 DF MALE ELBOW GM FEMALE ELBOW GF 10/11 12/13 UNION UD REDUCING UNION UR BULKHEAD UNION UP UNION ELBOW UG UNION TEE UT UNION CROSS UC BUTT WELD PIPE CONNECTOR DBW SOCKET WELD TUBE CONNECTOR DSW BULKHEAD MALE CONNECTOR DMP 14 15 16 17 18 19 20 21 22 PRODUCTS INDEX BULKHEAD FEMALE CONNECTOR DFP REDUCER R MALE ADAPTER AM FEMALE ADAPTER AF MALE BRANCH TEE TMC MALE RUN TEE TML FEMALE BRANCH TEE TFC FEMALE RUN TEE TFL TUBE END CLOSURE TT FITTING END CLOSURE TR NUT D FRONT FERRULE FA BACK FERRULE FP 23 24/25 26 27 28/29 30/31 32 33 34 35 36 37 37 5 PRODUCTS F E T G DOUBLE FERRULE COMPRESSION FITTINGS P C B A Metric OD tube x Male NPT thread T TUBE OD P NPT MALE 3 1/8” 3 1/4” 6 1/8” 6 1/4” 6 3/8” 6 1/2” 8 1/8” 8 1/4” 8 3/8” 8 1/2” 10 1/8” 10 1/4” 10 3/8” 10 1/2” 12 1/4” 12 3/8” 12 1/2” 12 3/4” 12 1” 14 1/4” 14 3/8” 14 1/2” 15 1/2” 16 3/8” 16 1/2” 16 3/4” 18 1/2” 18 3/4” 20 1/2” 20 3/4” 22 3/4” 22 1” 25 1/2” 25 3/4” 25 1” 28 1” 28 1.1/4” 30 1.1/4” 32 1.1/4” 38 1.1/2” 6 MALE CONNECTOR A 30.5 35.6 32.8 37.9 38.4 44.7 34.2 38.7 39.3 45.6 36.3 40.9 40.9 46.5 43.4 43.4 49.0 50.5 57.1 44.1 44.1 49.0 49.0 44.1 49.0 50.5 50.5 50.5 52.3 52.3 52.3 57.1 57.5 57.5 62.3 72.4 73.1 77.2 79.6 96.6 B 9.6 14.3 9.6 14.3 14.3 19.1 9.6 14.3 14.3 19.1 9.6 14.3 14.3 19.1 14.3 14.3 19.1 19.1 23.8 14.3 14.3 19.1 19.1 14.3 19.1 19.1 19.1 19.1 19.1 19.1 19.1 23.8 19.1 19.1 23.8 23.8 23.8 23.8 23.8 26.2 C 12.9 12.9 15.3 15.3 15.3 15.3 16.2 16.2 16.2 16.2 17.2 17.2 17.2 17.2 22.8 22.8 22.8 22.8 22.8 24.4 24.4 24.4 24.4 24.4 24.4 24.4 24.4 24.4 26.0 26.0 26.0 26.0 31.3 31.3 31.3 36.6 36.6 39.6 42.0 49.4 E 2.4 2.4 4.8 4.8 4.8 4.8 4.8 6.3 6.3 6.3 4.8 7.9 7.9 7.9 7.1 9.5 9.5 9.5 9.5 7.1 9.5 11.1 11.9 9.5 11.9 12.7 11.9 15.1 11.9 15.9 15.9 18.3 11.9 15.8 21.8 21.8 21.8 26.2 28.6 33.7 DM F 11 14 14 14 19 22 14 14 19 22 17 19 19 22 22 22 22 27 35 24 24 24 24 24 24 27 27 27 30 30 30 35 35 35 35 41 46 46 46 55 G 11 11 14 14 14 14 16 16 16 16 19 19 19 19 22 22 22 22 22 25 25 25 25 25 25 25 30 30 32 32 32 32 38 38 38 46 46 50 50 60 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M - PART No. 3 - 2 - DM 3 - 4 - DM 6 - 2 - DM 6 - 4 - DM 6 - 6 - DM 6 - 8 - DM 8 - 2 - DM 8 - 4 - DM 8 - 6 - DM 8 - 8 - DM 10 - 2 - DM 10 - 4 - DM 10 - 6 - DM 10 - 8 - DM 12 - 4 - DM 12 - 6 - DM 12 - 8 - DM 12 - 12 - DM 12 - 16 - DM 14 - 4 - DM 14 - 6 - DM 14 - 8 - DM 15 - 8 - DM 16 - 6 - DM 16 - 8 - DM 16 - 12 - DM 18 - 8 - DM 18 - 12 - DM 20 - 8 - DM 20 - 12 - DM 22 - 12 - DM 22 - 16 - DM 25 - 8 - DM 25 - 12 - DM 25 - 16 - DM 28 - 16 - DM 28 - 20 - DM 30 - 20 - DM 32 - 20 - DM 38 - 20 - DM PRODUCTS F E T G DOUBLE FERRULE COMPRESSION FITTINGS P C B A Inch OD tube x Male NPT thread T TUBE OD P NPT MALE 1/16” 1/16” 1/16” 1/8” 1/8” 1/8” 1/8” 1/4” 1/4” 1/8” 1/4” 1/4” 1/4” 3/8” 1/4” 1/2” 5/16” 1/4” 3/8” 1/8” 3/8” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 1/4” 1/2” 3/8” 1/2” 1/2” 1/2” 3/4” 1/2” 1” 5/8” 3/8” 5/8” 1/2” 3/4” 1/2” 3/4” 3/4” 3/4” 1” 7/8” 3/4” 1” 1/2” 1” 3/4” 1” 1” 1.1/4” 1” 1.1/4” 1.1/4” 1.1/2” 1.1/2” MALE CONNECTOR A 23.9 26.2 30.5 35.6 32.8 37.8 38.4 44.7 38.6 35.3 39.8 39.8 41.2 43.4 43.4 49.0 50.5 57.1 44.2 49.0 50.5 50.5 57.1 50.5 57.4 57.4 62.2 77.2 77.2 88.9 B 9.6 9.6 9.6 14.3 9.6 14.3 14.3 19.1 14.3 9.6 14.3 14.3 19.1 14.3 14.3 19.1 19.1 23.8 14.3 19.1 19.1 19.1 23.8 19.1 19.1 19.1 23.8 23.8 23.8 26.2 C 8.6 8.6 12.7 12.7 15.3 15.3 15.3 15.3 16.3 16.8 16.8 16.8 16.8 22.9 22.9 22.9 22.9 22.9 24.4 24.4 24.4 24.4 24.4 26.0 31.2 31.2 31.2 41.2 41.2 50.0 E 1.3 1.3 2.4 2.4 4.8 4.8 4.8 4.8 6.3 4.8 7.1 7.1 7.1 7.1 9.6 10.4 10.4 10.4 9.6 10.4 10.4 15.8 15.8 15.8 10.4 15.8 22.3 22.3 27.6 34.0 DM F 8 14 11 14 14 14 19 22 14 16 16 19 22 22 22 22 27 35 24 24 27 27 35 30 35 35 35 46 46 55 G 8 8 11 11 14 14 14 14 16 17 17 17 17 22 22 22 22 22 25 25 28.5 28.5 28.5 32 38 38 38 50 50 60 P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P - PART No. 1 - 1 - DM 1 - 2 - DM 2 - 2 - DM 2 - 4 - DM 4 - 2 - DM 4 - 4 - DM 4 - 6 - DM 4 - 8 - DM 5 - 4 - DM 6 - 2 - DM 6 - 4 - DM 6 - 6 - DM 6 - 8 - DM 8 - 4 - DM 8 - 6 - DM 8 - 8 - DM 8 - 12 - DM 8 - 16 - DM 10 - 6 - DM 10 - 8 - DM 12 - 8 - DM 12 - 12 - DM 12 - 16 - DM 14 - 12 - DM 16 - 8 - DM 16 - 12 - DM 16 - 16 - DM 20 - 16 - DM 20 - 20 - DM 24 - 24 - DM 7 PRODUCTS F E T G DOUBLE FERRULE COMPRESSION FITTINGS P C B A Metric OD tube x Female NPT thread T TUBE OD P NPT FEMALE 3 1/8” 3 1/4” 6 1/8” 6 1/4” 6 3/8” 6 1/2” 8 1/8” 8 1/4” 8 3/8” 8 1/2” 10 1/4” 10 3/8” 10 1/2” 12 1/4” 12 3/8” 12 1/2” 15 1/2” 16 1/2” 20 1/2” 20 3/4” 22 3/4” 22 1” 25 3/4” 25 1” 32 1.1/4” 38 1.1/2” 8 FEMALE CONNECTOR A 28.7 33.5 31.3 35.8 37.6 42.5 32.1 37.0 38.5 43.3 37.8 39.4 44.2 40.3 41.9 46.7 46.7 46.9 47.9 49.7 49.7 57.9 53.4 62.3 74.6 83.3 B 10.4 15.0 10.4 15.0 15.0 19.8 10.4 15.0 15.0 19.8 15.0 15.0 19.8 15.0 15.0 19.8 19.8 19.8 19.8 20.6 20.6 25.4 20.6 25.4 25.4 27.6 C 12.9 12.9 15.3 15.3 15.3 15.3 16.2 16.2 16.2 16.2 17.2 17.2 17.2 22.8 22.8 22.8 24.4 24.4 26.0 26.0 26.0 26.0 31.3 31.3 42.0 49.4 E 2.4 2.4 4.8 4.8 4.8 4.8 6.3 6.3 6.3 6.3 7.9 7.9 7.9 9.5 9.5 9.5 11.9 12.7 15.9 15.9 18.3 18.3 21.8 21.8 27.6 34.0 DF F 14 19 14 19 22 27 14 19 22 27 19 22 27 22 22 27 27 27 30 35 35 41 35 41 55 60 G 11 11 14 14 14 14 16 16 16 16 19 19 19 22 22 22 25 25 32 32 32 32 38 38 50 60 M M M M M M M M M M M M M M M M M M M M M M M M M M - PART No. 3 - 2 - DF 3 - 4 - DF 6 - 2 - DF 6 - 4 - DF 6 - 6 - DF 6 - 8 - DF 8 - 2 - DF 8 - 4 - DF 8 - 6 - DF 8 - 8 - DF 10 - 4 - DF 10 - 6 - DF 10 - 8 - DF 12 - 4 - DF 12 - 6 - DF 12 - 8 - DF 15 - 8 - DF 16 - 8 - DF 20 - 8 - DF 20 - 12 - DF 22 - 12 - DF 22 - 16 - DF 25 - 12 - DF 25 - 16 - DF 32 - 20 - DF 38 - 24 - DF PRODUCTS F E T G DOUBLE FERRULE COMPRESSION FITTINGS P C B A Inch OD tube x Female NPT thread T TUBE OD P NPT FEMALE 1/16” 1/16” 1/16” 1/8” 1/8” 1/8” 1/8” 1/4” 1/4” 1/8” 1/4” 1/4” 1/4” 3/8” 1/4” 1/2” 5/16” 1/8” 5/16” 1/4” 3/8” 1/8” 3/8” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 1/4” 1/2” 3/8” 1/2” 1/2” 1/2” 3/4” 5/8” 3/8” 5/8” 1/2” 3/4” 1/2” 3/4” 3/4” 7/8” 3/4” 1” 3/4” 1” 1” 1.1/4” 1.1/4” 1.1/2” 1.1/2” FEMALE CONNECTOR A 23.6 24.4 28.7 33.6 31.2 35.8 37.6 42.4 32.0 36.8 32.8 37.6 39.1 43.9 40.4 41.9 46.7 48.3 41.9 46.7 46.7 48.3 49.8 53.4 62.3 74.6 83.3 B 9.9 10.4 10.4 15.0 9.9 15.0 15.0 19.8 10.4 15.0 10.4 15.0 15.0 19.8 15.0 15.0 19.8 20.6 15.0 19.8 19.8 20.6 20.6 20.6 25.4 25.4 27.6 C 8.6 8.6 12.7 12.7 15.3 15.3 15.3 15.3 16.3 16.3 16.8 16.8 16.8 16.8 22.9 22.9 22.9 22.9 24.4 24.4 24.4 24.4 25.9 31.2 31.2 41.2 50.0 E 1.3 1.3 2.4 2.4 4.8 4.8 4.8 4.8 6.3 6.3 7.1 7.1 7.1 7.1 10.4 10.4 10.4 10.4 12.7 12.7 15.8 15.8 18.3 22.3 22.3 27.6 34.0 DF F 11 14 14 19 14 19 22 27 14 19 16 19 22 27 22 22 27 32 24 27 27 32 35 35 41 55 60 G 8 8 11 11 14 14 14 14 16 16 17 17 17 17 22 22 22 22 25 25 28.5 28.5 32 38 38 50 60 P P P P P P P P P P P P P P P P P P P P P P P P P P P PART No. - 1 - 1 - DF - 1 - 2 - DF - 2 - 2 - DF - 2 - 4 - DF - 4 - 2 - DF - 4 - 4 - DF - 4 - 6 - DF - 4 - 8 - DF - 5 - 2 - DF - 5 - 4 - DF - 6 - 2 - DF - 6 - 4 - DF - 6 - 6 - DF - 6 - 8 - DF - 8 - 4 - DF - 8 - 6 - DF - 8 - 8 - DF - 8 - 12 - DF - 10 - 6 - DF - 10 - 8 - DF - 12 - 8 - DF - 12 - 12 - DF - 14 - 12 - DF - 16 - 12 - DF - 16 - 16 - DF - 20 - 20 - DF - 24 - 24 - DF 9 DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C B H T G F P E MALE ELBOW GM A Metric OD tube x Male NPT thread T TUBE OD P NPT MALE 3 1/8” 3 1/4” 6 1/8” 6 1/4” 6 3/8” 6 1/2” 8 1/8” 8 1/4” 8 3/8” 8 1/2” 10 1/8” 10 1/4” 10 3/8” 10 1/2” 12 1/4” 12 3/8” 12 1/2” 12 3/4” 15 1/2” 16 1/2” 16 3/4” 18 1/2” 18 3/4” 20 1/2” 20 3/4” 22 3/4” 22 1” 25 3/4” 25 1” 30 1.1/4” 32 1.1/4” 38 1.1/2” 10 A 23.6 24.6 27.0 27.0 29.8 31.8 28.8 28.8 30.6 32.6 31.5 31.5 31.5 33.5 36.0 36.0 36.0 39.8 38.0 38.0 39.8 39.8 39.8 44.6 44.6 44.6 44.6 49.1 49.1 69.9 72.3 84.0 B 9.6 14.3 9.6 14.3 14.3 19.1 9.6 14.3 14.3 19.1 9.6 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 23.8 19.1 23.8 23.8 23.8 26.2 C 12.9 12.9 15.3 15.3 15.3 15.3 16.2 16.2 16.2 16.2 17.2 17.2 17.2 17.2 22.8 22.8 22.8 22.8 24.4 24.4 24.4 24.4 24.4 26.0 26.0 26.0 26.0 31.3 31.3 39.6 42.0 49.4 E 2.4 2.4 4.8 4.8 4.8 4.8 4.8 6.3 6.3 6.3 4.8 7.1 7.9 7.9 7.1 9.5 9.5 9.5 11.9 11.9 12.7 11.9 15.1 11.9 15.9 15.9 18.3 15.8 21.8 26.2 27.6 33.7 F 11 14 14 14 17 22 14 14 17 22 17 17 17 22 22 22 22 27 24 24 27 27 27 35 35 35 35 35 35 45 45 55 G 11 11 14 14 14 14 16 16 16 16 19 19 19 19 22 22 22 22 25 25 25 30 30 32 32 32 32 38 38 50 50 60 H 17.8 23.4 18.8 23.4 26.2 33.0 19.8 24.4 26.2 33.0 21.6 26.2 26.2 33.0 26.2 28.2 33.0 36.8 35.1 35.1 36.8 36.8 36.8 41.7 41.7 41.7 46.5 41.7 46.5 53.1 53.1 60.4 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M - PART No. 3 - 2 - GM 3 - 4 - GM 6 - 2 - GM 6 - 4 - GM 6 - 6 - GM 6 - 8 - GM 8 - 2 - GM 8 - 4 - GM 8 - 6 - GM 8 - 8 - GM 10 - 2 - GM 10 - 4 - GM 10 - 6 - GM 10 - 8 - GM 12 - 4 - GM 12 - 6 - GM 12 - 8 - GM 12 - 12 - GM 15 - 8 - GM 16 - 8 - GM 16 - 12 - GM 18 - 8 - GM 18 - 12 - GM 20 - 8 - GM 20 - 12 - GM 22 - 12 - GM 22 - 16 - GM 25 - 12 - GM 25 - 16 - GM 30 - 20 - GM 32 - 20 - GM 38 - 24 - GM DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C B H T G F P E MALE ELBOW GM A Inch OD tube x Male NPT thread T TUBE OD P NPT MALE 1/16” 1/16” 1/16” 1/8” 1/8” 1/8” 1/8” 1/4” 1/4” 1/8” 1/4” 1/4” 1/4” 3/8” 1/4” 1/2” 5/16” 1/4” 3/8” 1/8” 3/8” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 1/4” 1/2” 3/8” 1/2” 1/2” 1/2” 3/4” 5/8” 1/2” 3/4” 1/2” 3/4” 3/4” 7/8” 3/4” 1” 3/4” 1” 1” 1.1/4” 1.1/4” 1.1/2” 1.1/2” A 19.0 19.0 23.6 24.6 26.9 26.9 29.7 31.8 28.7 30.5 30.5 31.2 33.3 36.0 36.0 36.0 39.9 38.1 39.9 39.9 44.7 49.0 49.0 66.5 78.0 B 9.6 9.6 9.6 14.3 9.6 14.3 14.3 19.1 9.6 9.6 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 19.1 19.1 19.1 19.1 23.8 23.8 26.2 C 8.6 8.6 12.7 12.7 15.3 15.3 15.3 15.3 16.3 16.8 16.8 16.8 16.8 22.9 22.9 22.9 22.9 24.4 24.4 24.4 25.9 31.2 31.2 41.2 50.0 E 1.3 1.3 2.4 2.4 4.8 4.8 4.8 4.8 6.3 4.8 7.1 7.1 7.1 4.8 9.6 10.4 10.4 11.9 11.9 15.8 15.8 15.8 22.3 27.6 34.0 F 11 11 11 14 14 14 17 22 14 14 17 17 22 22 22 22 27 24 27 27 35 35 35 46 55 G 8 8 11 11 14 14 14 14 16 17 17 17 17 22 22 22 22 25 28.5 28.5 32 38 38 50 60 H 17.8 17.8 17.8 23.4 18.8 23.4 26.2 33.0 24.4 20.9 25.4 26.2 33.0 28.2 28.2 33.0 36.8 35.0 36.8 36.8 41.6 41.6 46.5 47.8 60.4 P P P P P P P P P P P P P P P P P P P P P P P P P - PART No. 1 - 1 - GM 1 - 2 - GM 2 - 2 - GM 2 - 4 - GM 4 - 2 - GM 4 - 4 - GM 4 - 6 - GM 4 - 8 - GM 5 - 4 - GM 6 - 2 - GM 6 - 4 - GM 6 - 6 - GM 6 - 8 - GM 8 - 4 - GM 8 - 6 - GM 8 - 8 - GM 8 - 12 - GM 10 - 8 - GM 12 - 8 - GM 12 - 12 - GM 14 - 12 - GM 16 - 12 - GM 16 - 16 - GM 20 - 20 - GM 24 - 24 - GM 11 DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C T G F P B H E A Metric OD tube x Female NPT thread T TUBE OD P NPT FEMALE 3 1/8” 3 1/4” 6 1/8” 6 1/4” 6 1/2” 8 1/4” 8 3/8” 10 1/4” 10 3/8” 12 1/4” 12 3/8” 12 1/2” 16 1/2” 25 3/4” 25 1” 12 FEMALE ELBOW A 24.6 27.4 27.0 29.8 34.6 30.6 32.6 33.5 33.5 36.0 36.0 38.8 39.5 49.0 53.6 B 10.4 15.0 10.4 15.0 19.8 15.0 15.0 15.0 15.0 15.0 15.0 19.8 19.8 20.6 25.4 C 12.9 12.9 15.3 15.3 15.3 16.2 16.2 17.2 17.2 22.8 22.8 22.8 24.4 31.3 31.3 E 2.4 2.4 4.8 4.8 4.8 6.3 6.3 7.9 7.9 9.5 9.5 9.5 12.7 22.3 22.3 GF F 14 19 14 19 27 19 22 19 22 22 22 27 27 35 41 G 11 11 14 14 14 16 16 19 19 22 22 22 25 38 38 H 19.0 22.4 19.0 22.4 28.5 22.4 22.4 22.4 22.4 22.4 22.4 28.5 28.5 31.8 38.1 M M M M M M M M M M M M M M M PART No. - 3 - 2 - GF - 3 - 4 - GF - 6 - 2 - GF - 6 - 4 - GF - 6 - 8 - GF - 8 - 4 - GF - 8 - 6 - GF - 10 - 4 - GF - 10 - 6 - GF - 12 - 4 - GF - 12 - 6 - GF - 12 - 8 - GF - 16 - 8 - GF - 25 - 12 - GF - 25 - 16 - GF DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C T G F P B H E A Inch OD tube x Female NPT thread T TUBE OD P NPT FEMALE 1/8” 1/8” 1/8” 1/4” 1/4” 1/8” 1/4” 1/4” 1/4” 3/8” 1/4” 1/2” 5/16” 1/8” 5/16” 1/4” 3/8” 1/8” 3/8” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 1/4” 1/2” 3/8” 1/2” 1/2” 5/8” 3/8” 5/8” 1/2” 3/4” 1/2” 3/4” 3/4” 7/8” 3/4” 1” 3/4” 1” 1” FEMALE ELBOW A 24.6 27.4 26.9 29.7 31.8 34.6 28.7 30.5 30.5 31.2 33.3 36.0 36.0 36.0 38.9 38.1 39.9 39.9 44.7 44.7 49.0 53.6 B 10.4 15.0 10.4 15.0 15.0 19.8 10.4 15.0 10.4 15.0 15.0 19.8 15.0 15.0 19.8 15.0 19.8 19.8 20.6 20.6 20.6 25.4 C 12.7 12.7 15.3 15.3 15.3 15.3 16.3 16.3 16.8 16.8 16.8 16.8 22.9 22.9 22.9 24.4 24.4 24.4 24.4 25.9 31.2 31.2 E 2.4 2.4 4.8 4.8 4.8 4.8 6.3 6.3 7.1 7.1 7.1 7.1 7.1 10.4 10.4 12.7 12.7 15.8 15.8 18.2 22.3 22.3 GF F 14 19 14 19 22 27 19 22 17 19 22 27 22 22 27 24 27 27 35 35 35 41 G 11 11 14 14 14 14 16 16 17 17 17 17 22 22 22 25 25 28.5 28.5 32 38 38 H 19.0 22.4 19.0 22.4 22.4 28.5 19.1 22.4 19.1 22.4 22.4 28.5 22.4 22.4 28.5 22.4 28.5 28.5 31.8 31.8 31.8 38.1 P P P P P P P P P P P P P P P P P P P P P P PART No. - 2 - 2 - GF - 2 - 4 - GF - 4 - 2 - GF - 4 - 4 - GF - 4 - 6 - GF - 4 - 8 - GF - 5 - 2 - GF - 5 - 4 - GF - 6 - 2 - GF - 6 - 4 - GF - 6 - 6 - GF - 6 - 8 - GF - 8 - 4 - GF - 8 - 6 - GF - 8 - 8 - GF - 10 - 6 - GF - 10 - 8 - GF - 12 - 8 - GF - 12 - 12 - GF - 14 - 12 - GF - 16 - 12 - GF - 16 - 16 - GF 13 DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS T E T G F C A Metric OD tubes T TUBE OD 3 6 8 10 12 14 15 16 18 20 22 25 28 30 32 38 Inch OD tubes T TUBE OD 1/16” 1/8” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1.1/4” 1.1/2” 14 UNION UD A 35.3 41.0 43.2 46.2 51.2 52.0 52.0 52.0 53.5 55.0 55.0 65.0 85.0 92.7 97.3 113.6 C 12.9 15.3 16.2 17.2 22.8 24.4 24.4 24.4 24.4 26.0 26.0 31.3 36.6 39.6 42.0 49.4 E 2.4 4.8 6.3 7.9 9.5 11.1 11.9 12.7 15.1 15.9 18.3 21.8 21.8 26.2 28.6 33.7 F 11 14 16 17 22 24 24 24 27 30 30 35 41 46 46 55 G 11 14 16 19 22 25 25 25 30 32 32 38 46 50 50 60 A 25.1 35.6 40.9 42.9 45.0 51.3 52.0 53.6 55.2 64.8 92.2 C 8.6 12.7 15.3 16.3 16.8 22.9 24.4 24.4 25.9 31.2 41.2 E 1.3 2.4 4.8 6.3 7.1 10.4 12.7 15.8 18.2 22.3 27.6 F 8 11 14 14 16 22 24 27 30 35 46 G 8 11 14 16 17 22 25 28.5 32 38 50 108.0 50.0 34.0 55 60 PART No. M - 3 - UD M - 6 - UD M - 8 - UD M - 10 - UD M - 12 - UD M - 14 - UD M - 15 - UD M - 16 - UD M - 18 - UD M - 20 - UD M - 22 - UD M - 25 - UD M - 28 - UD M - 30 - UD M - 32 - UD M - 38 - UD PART P-1P-2P-4P-5P-6P-8P - 10 P - 12 P - 14 P - 16 P - 20 No. UD UD UD UD UD UD - UD - UD - UD - UD - UD P - 24 - UD DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS T1 C G1 T G F C1 REDUCING UNION A UR Metric OD tubes T TUBE OD 6 8 10 10 12 12 12 16 16 22 22 25 25 30 30 32 32 38 38 T1 TUBE OD 3 6 6 8 6 8 10 10 12 18 20 12 20 20 25 20 25 20 25 A 38.6 42.3 44.5 45.1 47.0 47.8 48.7 49.5 52.0 55.0 55.0 65.0 65.0 75.4 80.1 77.8 82.3 92.0 104.6 C 15.3 16.2 17.2 17.2 22.8 22.8 22.8 24.4 24.4 26.0 26.0 31.3 31.3 39.6 39.6 42.0 42.0 49.4 49.4 C1 12.9 15.3 15.3 16.2 15.3 16.2 17.2 17.2 22.8 24.4 26.6 22.8 26.0 26.0 31.3 26.0 31.3 31.3 39.6 F 14 14 17 17 22 22 22 24 24 30 30 35 35 45 45 45 45 55 55 G 14 16 19 19 22 22 22 25 25 32 32 38 38 50 50 50 50 60 60 G1 11 14 14 16 14 16 19 19 22 30 32 22 32 32 38 32 38 38 50 Inch OD tubes T TUBE OD 1/4” 5/16” 5/16” 3/8” 3/8” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 3/4” 1” 1” 1.1/4” 1.1/2” T1 TUBE OD 1/8” 1/8” 1/4” 1/8” 1/4” 1/8” 1/4” 3/8” 3/8” 1/2” 1/4” 3/8” 1/2” 1/2” 3/4” 1” 1.1/4” A 38.6 39.6 42.2 40.9 43.2 45.2 47.0 48.5 49.3 52.0 49.3 50.8 53.6 60.5 60.5 92.2 60.5 C 15.3 16.3 16.3 16.8 16.8 22.9 22.9 22.9 24.4 24.4 24.4 24.4 24.4 31.2 31.2 41.2 31.2 C1 12.7 12.7 15.3 12.7 15.3 12.7 15.3 16.8 16.8 22.9 15.3 16.8 22.9 22.9 24.4 31.2 24.4 F 14 14 14 16 16 22 22 22 24 24 27 27 27 35 35 45 35 G 14 16 16 17 17 22 22 22 25 25 28.5 28.5 28.5 38 38 50 38 G1 11 11 14 11 14 11 14 17 17 22 14 17 22 22 28.5 38 50 PART No. 6 - 3 - UR 8 - 6 - UR 10 - 6 - UR 10 - 8 - UR 12 - 6 - UR 12 - 8 - UR 12 - 10 - UR 16 - 10 - UR 16 - 12 - UR 22 - 18 - UR 22 - 20 - UR 25 - 12 - UR 25 - 20 - UR 30 - 20 - UR 30 - 25 - UR 32 - 20 - UR 32 - 25 - UR 38 - 20 - UR 38 - 25 - UR M M M M M M M M M M M M M M M M M M M - P P P P P P P P P P P P P P P P P PART No. 4 - 2 - UR 5 - 2 - UR 5 - 4 - UR 6 - 2 - UR 6 - 4 - UR 8 - 2 - UR 8 - 4 - UR 8 - 6 - UR 10 - 6 - UR 10 - 8 - UR 12 - 4 - UR 12 - 6 - UR 12 - 8 - UR 16 - 8 - UR 16 - 12 - UR 20 - 16 - UR 24 - 20 - UR - 15 DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS T E T G F C BULKHEAD UNION A Metric OD tubes T TUBE OD A C E F G 3 6 8 10 12 14 15 16 18 20 25 30 32 38 51.3 57.7 61.0 63.7 71.0 72.5 72.5 72.5 78.9 84.5 95.6 123.7 128.3 144.6 12.9 15.3 16.2 17.2 22.8 24.4 24.4 24.4 24.4 26.0 31.2 39.6 42.0 49.4 2.4 4.8 6.3 7.9 9.5 11.1 11.9 12.7 15.1 15.8 22.3 26.2 27.6 33.7 14 16 17 22 24 27 27 27 30 35 35 50 50 60 11 14 16 19 22 25 25 25 30 32 38 46 50 60 A C E F G 31.5 51.3 57.6 60.7 62.2 71.1 72.6 79.0 95.6 123.2 139.2 8.6 12.7 15.3 16.3 16.8 22.9 24.4 24.4 31.2 41.2 50.0 1.3 2.4 4.8 6.3 7.1 10.4 12.7 16.0 22.3 27.6 34.0 11 11 16 17 22 24 27 30 35 50 60 8 11 14 16 17 22 25 28.5 38 50 60 Inch OD tubes T TUBE OD 1/16” 1/8” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 1” 1.1/4” 1.1/2” 16 UP Panel Hole Drill Size 8.3 11.5 13.1 16.3 19.5 22.5 22.8 22.8 26.0 29.0 33.7 40.5 42.5 50.5 Max. Panel Thickness 12.7 10.2 11.2 11.2 12.7 12.7 12.7 12.7 16.8 19.0 19.0 19.0 19.0 19.0 Panel Hole Drill Size 5.2 8.3 11.5 13.0 14.6 19.5 22.6 25.8 33.7 41.6 49.6 Max. Panel Thickness 3.0 12.7 10.2 11.2 11.2 12.7 12.7 16.8 19.0 19.0 19.0 PART No. M M M M M M M M M M M M M M - 36810 12 14 15 16 18 20 25 30 32 38 UP UP UP - UP - UP - UP - UP - UP - UP - UP - UP - UP - UP - UP PART No. P P P P P P P P P P P - 12456810 12 16 20 24 UP UP UP UP UP UP - UP - UP - UP - UP - UP DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS A C T G F A E UNION ELBOW UG T Metric OD tube T TUBE OD 3 6 8 10 12 14 15 16 18 20 22 25 28 30 32 38 A 22.3 27.0 28.8 31.5 36.0 38.0 38.0 38.0 39.8 44.6 44.6 49.1 64.0 69.9 72.3 84.0 C 12.9 15.3 16.2 17.2 22.8 24.4 24.4 24.4 24.4 26.0 26.0 31.2 36.6 39.6 42.0 49.4 E 2.4 4.8 6.3 7.9 9.5 11.1 11.9 12.7 15.1 15.9 18.3 21.8 21.8 26.2 28.6 33.7 F 11 14 16 17 22 24 24 24 27 32 32 35 41 46 46 55 G 11 14 16 19 22 25 25 25 30 32 32 38 46 50 50 60 Inch OD tube T TUBE OD 1/16” 1/8” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1.1/4” A 17.8 22.4 26.9 28.7 30.5 36.0 38.1 39.9 44.7 49.0 66.6 C 8.6 12.7 15.3 16.3 16.8 22.9 24.4 24.4 25.9 31.2 41.2 E 1.3 2.4 4.8 6.3 7.1 10.4 12.7 15.8 18.2 22.3 27.6 F 11 11 14 16 17 22 24 27 35 35 46 G 8 11 14 16 17 22 25 28.5 32 38 50 78.0 50.0 34.0 55 60 1.1/2” PART No. M - 3 - UG M - 6 - UG M - 8 - UG M - 10 - UG M - 12 - UG M - 14 - UG M - 15 - UG M - 16 - UG M - 18 - UG M - 20 - UG M - 22 - UG M - 25 - UG M - 28 - UG M - 30 - UG M - 32 - UG M - 38 - UG PART P-1P-2P-4P-5P-6P-8P - 10 P - 12 P - 14 P - 16 P - 20 No. UG UG UG UG UG UG - UG - UG - UG - UG - UG P - 24 - UG 17 DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C T A1 E T G F UNION TEE T A1 A1 UT A Metric OD tube T TUBE OD 3 6 8 10 12 14 15 16 18 20 22 25 28 30 32 38 Inch OD tube T TUBE OD 1/16” 1/8” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1.1/4” 1.1/2” 18 A 44.6 54.0 57.6 63.0 72.0 76.0 76.0 76.0 79.6 89.2 89.2 98.2 128.0 139.8 144.6 168.0 A 35.6 44.8 53.8 57.4 61.0 72.0 76.2 79.8 89.4 98.0 133.2 156.0 A1 22.3 27.0 28.8 31.5 36.0 38.0 38.0 38.0 39.8 44.6 44.6 49.1 64.0 69.9 72.3 84.0 A1 17.8 22.4 26.9 28.7 30.5 36.0 38.1 39.9 44.7 49.0 66.6 78.0 C 12.9 15.3 16.2 17.2 22.8 24.4 24.4 24.4 24.4 26.0 26.0 31.2 36.6 39.6 42.0 49.4 C 8.6 12.7 15.3 16,3 16.8 22.9 24.4 24.4 25.9 31.2 41.2 50.0 E 2.4 4.8 6.3 7.9 9.5 11.1 11.9 12.7 15.1 15.9 18.3 21.8 21.8 26.2 28.6 33.7 E 1.3 2.4 4.8 6.3 7.1 10.4 12.7 15.8 18.2 22.3 27.6 34.0 F 11 14 16 17 22 24 24 24 27 32 32 35 41 46 46 55 F 11 11 14 16 17 22 24 27 35 35 46 55 G 11 14 16 19 22 25 25 25 30 32 32 38 46 50 50 60 PART No. M - 3 - UT M - 6 - UT M - 8 - UT M - 10 - UT M - 12 - UT M - 14 - UT M - 15 - UT M - 16 - UT M - 18 - UT M - 20 - UT M - 22 - UT M - 25 - UT M - 28 - UT M - 30 - UT M - 32 - UT M - 38 - UT G 8 11 14 16 17 22 25 28.5 32 38 50 60 PART No. P - 1 - UT P - 2 - UT P - 4 - UT P - 5 - UT P - 6 - UT P - 8 - UT P - 10 - UT P - 12 - UT P - 14 - UT P - 16 - UT P - 20 - UT P - 24 - UT DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS T F A1 T E T G C UNION CROSS T A1 UC A1 A Metric OD tube T TUBE OD 3 6 8 10 12 16 22 25 Inch OD tube T TUBE OD 1/8” 1/4” 3/8” 1/2” 3/4” 1” A 44.6 54.0 57.6 63.0 72.0 76.0 89.2 98.2 A1 22.3 27.0 28.8 31.5 36.0 38.0 44.6 49.1 C 12.9 15.3 16.2 17.2 22.8 24.4 26.0 31.2 E 2.4 4.8 6.3 7.9 9.5 12.7 18.3 21.8 F 11 14 16 17 22 24 32 35 G 11 14 16 19 22 25 32 38 A A1 C E F G 44.8 53.8 61.0 72.0 79.8 98.0 22.4 26.9 30.5 36.0 39.9 49.0 12.7 15.3 16.8 22.9 24.4 31.2 2.4 4.8 7.1 10.4 15.8 22.3 11 14 17 22 27 35 11 14 17 22 28.5 38 PART M-3M-6M-8M - 10 M - 12 M - 16 M - 22 M - 25 No. UC UC UC - UC - UC - UC - UC - UC PART No. P P P P P P - 246812 16 UC UC UC UC - UC - UC 19 DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS H E T G F 37,5° C B A BUTT WELD PIPE CONNECTOR DBW Metric OD tube x ANSI B 36.19 Pipe T TUBE OD PIPE WELD MALE 3 1/8” 6 1/8” 6 1/4” 8 1/8” 8 1/4” 8 1/2” 10 1/4” 10 3/8” 10 1/2” 12 1/4” 12 3/8” 12 1/2” 16 1/2” 20 3/4” 22 3/4” 25 1” 30 1.1/4” 32 1.1/4” 38 1.1/2” A 30.5 32.8 37.9 34.2 38.7 45.6 40.9 40.9 46.5 43.4 43.4 49.0 49.0 52.3 52.3 62.3 77.2 79.6 91.6 B 9.6 9.6 14.3 9.6 14.3 19.1 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 19.1 23.8 23.8 23.8 26.2 C 12.9 15.3 15.3 16.3 16.3 16.3 17.2 17.2 17.2 22.9 22.9 22.9 24.4 26.O 26.0 31.2 39.6 42.0 49.4 E 2.4 4.8 4.8 5.1 6.3 6.3 7.1 7.9 7.9 7.1 9.5 9.5 12.7 15.9 15.9 21.8 26.2 28.6 33.7 F 11 14 14 16 16 22 19 19 22 22 22 22 24 30 30 35 45 45 55 G 11 14 14 16 16 16 19 19 19 22 22 22 25 32 32 38 50 50 60 H 10.3 10.3 13.7 10.3 13.7 21.3 13.7 17.2 21.3 13.7 17.2 21.3 21.3 26.7 26.7 33.4 42.2 42.2 48.3 M M M M M M M M M M M M M M M M M M M - Inch OD tube x ANSI B 36.19 Pipe T TUBE OD PIPE WELD MALE 1/8” 1/8” 1/4” 1/8” 1/4” 1/4” 5/16” 1/8” 5/16” 1/4” 3/8” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 3/8” 1/2” 1/2” 1/2” 3/4” 5/8” 1/2” 3/4” 3/4” 1” 1” 1.1/4” 1.1/4” 1.1/2” 1.1/2” A 30.5 32.8 37.8 34.0 38.6 39.9 39.9 46.3 43.4 49.0 50.5 49.0 50.5 62.2 77.2 88.9 B 9.6 9.6 14.3 9.6 14.3 14.3 14.3 19.1 14.3 19.1 19.1 19.1 19.1 23.8 23.8 26.2 C 12.7 15.3 15.3 16.3 16.3 16.8 16.8 16.8 22.9 22.9 22.9 24.4 24.4 31.2 41.2 50.0 E 2.4 4.8 4.8 5.1 6.3 7.1 7.1 7.1 10.4 10.4 10.4 12.7 15.8 22.3 27.6 34 F 11 14 14 14 16 16 17 22 22 22 27 24 27 35 46 55 G 11 14 14 16 16 17 17 17 22 22 22 25 28.5 38 50 60 H 10.3 10.3 13.7 10.3 13.7 13.7 17.2 21.3 17.2 21.3 26.7 21.3 26.7 33.4 42.2 48.3 P P P P P P P P P P P P P P P P PART No. 2 - 2 - DBW 4 - 2 - DBW 4 - 4 - DBW 5 - 2 - DBW 5 - 4 - DBW 6 - 4 - DBW 6 - 6 - DBW 6 - 8 - DBW 8 - 6 - DBW 8 - 8 - DBW 8 - 12 - DBW 10 - 8 - DBW 12 - 12 - DBW 16 - 16 - DBW 20 - 20 - DBW 24 - 24 - DBW 20 - PART No. 3 - 2 - DBW 6 - 2 - DBW 6 - 4 - DBW 8 - 2 - DBW 8 - 4 - DBW 8 - 8 - DBW 10 - 4 - DBW 10 - 6 - DBW 10 - 8 - DBW 12 - 4 - DBW 12 - 6 - DBW 12 - 8 - DBW 16 - 8 - DBW 20 - 12 - DBW 22 - 12 - DBW 25 - 16 - DBW 30 - 20 - DBW 32 - 20 - DBW 38 - 24 - DBW DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C H T E T G F B SOCKET WELD TUBE CONNECTOR A Metric OD tube T TUBE OD 3 6 10 12 20 25 32 38 Inch OD tube T TUBE OD 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2” A 29.0 33.5 37.6 41.2 43.4 52.6 72.4 81.8 B 6.4 7.9 9.6 12.7 14.3 19.1 19.1 23.8 C 12.9 15.3 17.2 22.8 26.0 31.3 42.0 49.4 E 2.4 4.8 7.1 10.4 15.8 22.3 27.6 34.0 F 11 14 16 22 27 35 45 55 G 11 14 19 22 32 38 50 60 H 22.9 26.2 30.3 31.0 33.3 40.4 50.3 54.6 A B C E F G H 29.0 33.5 37.6 41.2 43.4 52.6 72.4 81.8 6.4 7.9 9.6 12.7 14.3 19.1 19.1 23.8 12.7 15.3 16.8 22.9 24.4 31.2 41.2 50.0 2.4 4.8 7.1 10.4 15.8 22.3 27.6 34.0 11 14 16 22 27 35 45 55 11 14 17 22 28.5 38 50 60 22.9 26.2 30.3 31.0 33.3 40.4 50.3 54.6 DSW M M M M M M M M - PART No. 3 - 3 - DSW 6 - 6 - DSW 10 - 10 - DSW 12 - 12 - DSW 20 - 20 - DSW 25 - 25 - DSW 32 - 32 - DSW 38 - 38 - DSW P P P P P P P P - 246812 16 20 24 PART No. 2 - DSW 4 - DSW 6 - DSW 8 - DSW - 12 - DSW - 16 - DSW - 20 - DSW - 24 - DSW 21 PRODUCTS F E T G DOUBLE FERRULE COMPRESSION FITTINGS P B C BULKHEAD MALE CONNECTOR A Metric OD tube x Male NPT thread T TUBE OD P NPT MALE A 3 6 10 10 12 12 16 22 25 32 38 1/8” 1/8” 1/4” 3/8” 3/8” 1/2” 1/2” 3/4” 1” 1.1/4” 1.1/2” 46.4 49.5 57.4 57.4 63.3 68.8 69.6 83.3 93.2 110.5 122.8 Inch OD tube x Male NPT thread T TUBE OD P NPT MALE A 1/8” 1/4” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 3/4” 1” 1.1/4” 1.1/2” 22 1/8” 1/8” 1/4” 1/4” 3/8” 1/2” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2” 46.4 49.5 54.1 57.4 57.4 63.7 63.3 68.8 76.2 93.2 110.5 122.8 B C E F G 9.6 9.6 14.3 14.3 14.3 19.1 19.1 19.1 23.9 23.9 26.2 12.9 15.3 17.2 17.2 22.8 22.8 24.4 26.0 31.2 42.0 49.4 2.4 4.8 7.1 7.1 9.6 10.4 11.9 15.8 22.3 28.6 33.7 11 16 19 19 24 24 27 35 41 50 60 11 14 17 17 22 22 25 25 38 50 60 B C E F G 9.6 9.6 14.3 14.3 14.3 19.1 14.3 19.1 19.1 23.9 23.9 26.2 12.7 15.3 15.3 16.8 16.8 16.8 22.9 22.9 24.4 31.2 41.2 50.0 2.4 4.8 4.8 7.1 7.1 7.1 9.6 10.4 15.8 22.3 27.6 34.0 14 11 16 14 16 14 19 17 19 17 22 17 24 22 24 22 30 28.5 41 38 50 50 60 60 Panel Hole Drill Size 8.3 11.5 14.7 14.7 19.5 19.5 22.8 29.0 33.7 42.5 50.5 Max. Panel Thickness 12.7 10.2 11.2 11.2 12.7 12.7 12.7 19.0 19.0 19.0 19.0 Panel Hole Drill Size Max. Panel Thickness 8.3 11.5 11.5 14.7 14.7 14.7 19.5 19.5 25.8 33.7 42.5 50.5 12.7 10.2 10.2 11.2 11.2 11.2 12.7 12.7 16.8 19.0 19.0 19.0 DMP PART No. M M M M M M M M M M M - 3610 10 12 12 16 22 25 32 38 2 - DMP 2 - DMP - 4 - DMP - 6 - DMP - 6 - DMP - 8 - DMP - 8 - DMP - 12 - DMP - 16 - DMP - 20 - DMP - 24 - DMP PART No. P P P P P P P P P P P P - 2446668812 16 20 24 2 - DMP 2 - DMP 4 - DMP 4 - DMP 6 - DMP 8 - DMP 6 - DMP 8 - DMP - 12 - DMP - 16 - DMP - 20 - DMP - 24 - DMP PRODUCTS F E T G DOUBLE FERRULE COMPRESSION FITTINGS P B C BULKHEAD FEMALE CONNECTOR A Metric OD tube x Female NPT thread T TUBE OD P NPT FEMALE A 3 6 10 12 12 16 22 25 25 32 38 1/8” 1/4” 3/8” 3/8” 1/2” 1/2” 3/4” 3/4” 1” 1.1/4” 1.1/2” 44.7 51.6 56.8 61.8 66.7 67.5 79.9 84.3 93.2 105.7 114.5 Inch OD tube x Female NPT thread T TUBE OD P NPT FEMALE A 1/8” 1/4” 1/4” 3/8” 1/2” 1/2” 5/8” 3/4” 3/4” 1” 1” 1.1/4” 1.1/2” 1/8” 1/8” 1/4” 1/4” 3/8” 1/2” 1/2” 1/2” 3/4” 3/4” 1” 1.1/4” 1.1/2” 44.7 47.0 51.5 54.8 61.7 66.7 67.6 72.4 74.4 84.3 93.2 105.7 114.5 B C E F G 10.4 15.0 15.0 15.0 19.8 20.6 20.6 20.6 25.4 25.4 27.6 12.9 15.3 17.2 22.8 22.8 24.4 26.0 31.2 31.2 42.0 49.4 2.4 4.8 7.9 9.5 9.5 12.7 15.8 15.8 22.3 27.6 33.7 14 19 22 24 27 27 35 35 35 50 60 11 14 19 22 22 25 32 38 38 50 60 B C E F G 10.4 10.4 15.0 15.0 15.0 19.8 19.8 19.8 20.6 20.6 25.4 25.4 27.6 12.7 15.3 15.3 16.8 22.9 22.9 24.4 24.4 24.4 31.2 31.2 41.2 50.0 2.4 4.8 4.8 7.1 10.4 10.4 12.7 16.0 16.0 16.0 22.3 27.6 34.0 14 11 16 14 19 14 19 17 22 22 27 22 27 25 30 28.5 30 28.5 35 38 35 38 50 50 60 60 Panel Hole Drill Size 8.3 11.5 16.3 19.5 19.5 22.8 29.0 33.7 33.7 41.6 49.6 Max. Panel Thickness 12.7 10.2 11.2 12.7 12.7 12.7 19.0 19.0 19.0 19.0 19.0 Panel Hole Drill Size Max. Panel Thickness 8.3 11.5 11.5 14.7 19.5 19.5 22.6 25.8 25.8 33.7 33.7 41.6 49.6 12.7 10.2 10.2 11.2 12.7 12.7 12.7 16.8 16.8 19.0 19.0 19.0 19.0 DFP PART No. M M M M M M M M M M M - 3610 12 12 16 22 25 25 32 38 2 - DFP 4 - DFP - 6 - DFP - 6 - DFP - 8 - DFP - 8 - DFP - 12 - DFP - 12 - DFP - 16 - DFP - 20 - DFP - 24 - DFP PART No. P P P P P P P P P P P P P - 24468810 12 12 16 16 20 24 2 - DFP 2 - DFP 4 - DFP 4 - DFP 6 - DFP 8 - DFP - 8 - DFP - 8 - DFP - 12 - DFP - 12 - DFP - 16 - DFP - 20 - DFP - 24 - DFP 23 DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS T1 E T G F REDUCER C A Metric OD tube x Metric OD port T TUBE OD T1 TUBE OD 3 6 3 10 6 3 6 8 6 10 6 12 8 6 8 10 8 12 10 6 10 8 10 12 12 6 12 8 12 10 12 16 12 20 12 22 12 25 16 12 18 12 18 16 20 16 20 25 22 20 22 25 25 18 25 20 24 A 36.1 38.4 36.9 39.9 40.7 46.3 40.3 42.0 47.6 42.4 43.4 49.8 44.9 45.9 46.7 53.8 56.1 56.1 62.4 53.0 54.6 56.1 57.9 64.2 59.4 64.2 63.1 64.6 C 12.9 12.9 15.3 15.3 15.3 15.3 16.2 16.2 16.2 17.2 17.2 17.2 22.8 22.8 22.8 22.8 22.8 22.8 22.8 24.4 24.4 24.4 26.0 26.0 26.0 26.0 31.2 31.2 R E 2.4 2.4 1.8 4.8 4.8 4.8 4.6 6.4 6.4 4.6 6.2 7.9 4.6 6.2 7.7 9.5 9.5 9.5 9.5 9.1 9.1 12.7 12.7 15.8 15.1 18.3 13.9 15.1 F 11 14 14 14 14 14 14 14 14 17 17 17 22 22 22 22 22 24 27 24 27 27 30 30 30 30 35 35 G 11 11 14 14 14 14 16 16 16 17 17 17 22 22 22 22 22 22 22 25 30 30 32 32 32 32 38 38 M M M M M M M M M M M M M M M M M M M M M M M M M M M M PART No. -3-6-R - 3 - 10 - R -6-3-R -6-8-R - 6 - 10 - R - 6 - 12 - R -8-6-R - 8 - 10 - R - 8 - 12 - R - 10 - 6 - R - 10 - 8 - R - 10 - 12 - R - 12 - 6 - R - 12 - 8 - R - 12 - 10 - R - 12 - 16 - R - 12 - 20 - R - 12 - 22 - R - 12 - 25 - R - 16 - 12 - R - 18 - 12 - R - 18 - 16 - R - 20 - 16 - R - 20 - 25 - R - 22 - 20 - R - 22 - 25 - R - 25 - 18 - R - 25 - 20 - R DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS T1 E T G F REDUCER C A Inch OD tube x Inch OD port T TUBE OD T1 TUBE OD 1/8” 1/8” 1/8” 1/4” 1/4” 1/8” 1/4” 1/4” 1/4” 3/8” 1/4” 1/2” 5/16” 3/8” 5/16” 1/2” 3/8” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 1/4” 1/2” 3/8” 1/2” 1/2” 1/2” 3/4” 1/2” 1” 5/8” 3/4” 5/8” 7/8” 3/4” 1/2” 3/4” 1” 1” 1.1/4” 1” 1.1/2” A 33.5 36.0 36.8 39.1 40.6 46.3 41.9 46.5 41.4 43.2 48.5 45.0 46.7 52.3 53.8 60.2 54.6 56.2 54.6 62.5 80.5 89.2 C 12.7 12.7 15.3 15.3 15.3 15.3 16.3 16.3 16.8 16.8 16.8 22.9 22.9 22.9 22.9 22.9 24.4 24.4 24.4 24.4 31.2 31.2 R E 2.0 4.8 2.0 4.8 4.8 4.8 6.3 6.3 7.1 7.1 7.1 4.8 7.1 9.9 10.4 10.4 12.7 12.7 9.9 15.8 22.3 22.3 F 11 11 14 14 14 14 14 14 16 16 16 22 22 22 22 22 24 24 27 27 35 41 G 11 11 14 14 14 14 16 16 17 17 17 22 22 22 22 22 25 25 28.5 28.5 38 38 P P P P P P P P P P P P P P P P P P P P P P PART No. -2-2-R -2-4-R -4-2-R -4-4-R -4-6-R -4-8-R -5-6-R -5-8-R -6-4-R -6-6-R -6-8-R -8-4-R -8-6-R -8-8-R - 8 - 12 - R - 8 - 16 - R - 10 - 12 - R - 10 - 14 - R - 12 - 8 - R - 12 - 16 - R - 16 - 20 - R - 16 - 24 - R 25 PRODUCTS T E F DOUBLE FERRULE COMPRESSION FITTINGS P B A MALE ADAPTER AM Metric OD tube x Male NPT thread T TUBE OD P NPT MALE 3 1/4” 6 1/8” 6 1/4” 8 1/4” 10 1/4” 10 3/8” 12 1/4” 12 3/8” 12 1/2” 25 3/4” 25 1” 30 1” 30 1.1/4” 32 1.1/4” 38 1.1/2” A 34.8 32.8 38.1 39.1 39.9 40.6 46.5 46.5 52.0 62.0 66.8 79.2 80.0 81.0 92.2 B 9.6 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 19.1 23.8 23.8 23.8 23.8 26.2 E 7.1 4.6 4.6 6.2 7.7 7.7 7.1 9.1 9.1 15.7 15.7 22.2 24.6 27.4 33.3 F 14 14 14 14 14 19 14 19 22 27 35 41 45 46 55 M M M M M M M M M M M M M M M PART No. - 3 - 4 - AM - 6 - 2 - AM - 6 - 4 - AM - 8 - 4 - AM - 10 - 4 - AM - 10 - 6 - AM - 12 - 4 - AM - 12 - 6 - AM - 12 - 8 - AM - 25 - 12 - AM - 25 - 16 - AM - 30 - 16 - AM - 30 - 20 - AM - 32 - 20 - AM - 38 - 24 - AM Inch OD tube x Male NPT thread T TUBE OD P NPT MALE 1/8” 1/8” 1/8” 1/4” 1/4” 1/8” 1/4” 1/4” 1/4” 3/8” 1/4” 1/2” 5/16” 1/4” 3/8” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 1/4” 1/2” 3/8” 1/2” 1/2” 5/8” 1/2” 3/4” 1/2” 3/4” 3/4” 1” 3/4” 1” 1” 1.1/4” 1.1/4” 1.1/2” 1.1/2” A 29.5 34.8 31.8 37.0 37.8 43.4 38.1 38.9 39.6 45.2 44.5 45.2 50.8 52.3 52.3 52.3 58.7 66.0 80.3 94.5 B 9.6 14.4 9.6 14.3 14.3 19.1 14.3 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 19.1 19.1 23.8 23.8 26.2 E 4.8 7.1 4.8 4.8 4.8 4.8 6.3 7.1 7.1 7.1 7.1 9.9 9.9 11.9 11.9 15.0 15.7 20.3 27.6 33.2 F 11 14 11 14 19 22 14 14 19 22 14 19 22 22 22 27 27 35 45 55 P P P P P P P P P P P P P P P P P P P P PART No. 2 - 2 - AM 2 - 4 - AM 4 - 2 - AM 4 - 4 - AM 4 - 6 - AM 4 - 8 - AM 5 - 4 - AM 6 - 4 - AM 6 - 6 - AM 6 - 8 - AM 8 - 4 - AM 8 - 6 - AM 8 - 8 - AM 10 - 8 - AM 12 - 8 - AM 12 - 12 - AM 16 - 12 - AM 16 - 16 - AM 20 - 20 - AM 24 - 24 - AM 26 - PRODUCTS T E F DOUBLE FERRULE COMPRESSION FITTINGS P B FEMALE ADAPTER A Metric OD tube x Female NPT thread T TUBE OD P NPT FEMALE 3 1/4” 6 1/8” 6 1/4” 8 1/4” 10 1/4” 10 3/8” 10 1/2” 12 1/4” 12 1/2” 16 1/2” 22 3/4” 25 3/4” 25 1” 32 1.1/4” 38 1.1/2” Inch OD tube x Female NPT thread T TUBE OD P NPT FEMALE 1/8” 1/8” 1/4” 1/4” 1/4” 1/4” 5/16” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4” 1” 1” 1.1/4” 1.1/2” 1/8” 1/4” 1/8” 1/4” 3/8” 1/2” 1/4” 1/4” 3/8” 1/2” 1/4” 3/8” 1/2” 1/2” 1/2” 3/4” 1” 3/4” 1” 1.1/4” 1.1/2” AF A 31.7 32.5 37.1 37.6 38.1 40.1 46.5 43.7 52.3 47.7 52.0 51.2 66.5 78.0 88.9 B 15.0 9.9 15.0 15.0 15.0 15.0 19.8 15.0 19.8 19.8 20.6 20.6 25.4 25.4 27.6 E 2.4 4.6 4.6 6.4 7.7 7.7 7.7 9.1 9.1 9.1 15.0 15.0 19.8 27.4 33.3 F 14 14 19 19 19 22 27 19 27 27 35 35 41 55 60 A B E F 31.5 35.3 33.0 37.0 39.4 45.5 37.6 38.1 40.4 46.7 43.5 45.5 51.8 53.0 52.8 52.8 58.4 60.7 64.3 77.7 88.9 10.4 15.0 10.4 15.0 15.0 19.8 15.0 15.0 15.0 19.8 15.0 15.0 19.8 19.8 19.8 20.6 25.4 20.6 25.4 25.4 27.6 2.4 2.4 4.8 4.8 4.8 4.8 6.3 7.1 7.1 7.1 9.9 9.9 9.9 12.7 15.0 15.0 15.0 20.3 20.3 27.6 33.2 14 19 14 19 22 27 19 19 22 27 19 22 27 27 27 32 41 32 41 55 60 M M M M M M M M M M M M M M M PART No. - 3 - 4 - AF - 6 - 2 - AF - 6 - 4 - AF - 8 - 4 - AF - 10 - 4 - AF - 10 - 6 - AF - 10 - 8 - AF - 12 - 4 - AF - 12 - 8 - AF - 16 - 8 - AF - 22 - 12 - AF - 25 - 12 - AF - 25 - 16 - AF - 32 - 20 - AF - 38 - 24 - AF PART No. P P P P P P P P P P P P P P P P P P P P P - 224444566688810 12 12 12 16 16 20 24 2 - AF 4 - AF 2 - AF 4 - AF 6 - AF 8 - AF 4 - AF 4 - AF 6 - AF 8 - AF 4 - AF 6 - AF 8 - AF - 8 - AF - 8 - AF - 12 - AF - 16 - AF - 12 - AF - 16 - AF - 20 - AF - 24 - AF 27 DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C B A2 T T G F P MALE BRANCH TEE E A1 A1 TMC A Metric OD tube x Male NPT thread T TUBE OD P NPT MALE A 3 1/8” 47.2 3 1/4” 49.2 6 1/8” 54.0 6 1/4” 54.0 6 3/8” 59.6 8 1/4” 57.6 8 3/8” 61.2 8 1/2” 65.2 10 1/4” 63.0 10 3/8” 63.0 10 1/2” 67.0 12 1/4” 72.0 12 3/8” 72.0 12 1/2” 72.0 16 1/2” 76.0 25 3/4” 98.2 25 1” 98.2 30 1.1/4” 139.8 32 1.1/4” 144.6 38 1.1/2” 168.0 28 A1 23.6 24.6 27.0 27.0 29.8 28.8 30.6 32.6 31.5 31.5 33.5 36.0 36.0 36.0 38.0 49.1 49.1 66.9 72.3 84.0 A2 17.8 23.4 18.8 23.4 26.2 24.4 26.2 33.0 36.2 26.2 33.0 26.2 28.2 33.0 35.1 41.7 46.5 53.1 53.1 60.4 B 9.6 14.3 9.6 14.3 14.3 14.3 14.3 19.1 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 23.8 23.8 23.8 26.2 C 12.9 12.9 15.3 15.3 15.3 16.2 16.2 16.2 17.2 17.2 17.2 22.8 22.8 22.8 24.4 31.2 31.2 39.6 42.0 49.4 E 2.4 2.4 4.8 4.8 4.8 6.3 6.3 6.3 7.1 7.9 7.9 7.1 9.5 9.5 11.9 15.8 21.8 26.2 27.6 33.7 F 11 14 14 14 17 14 17 22 17 17 22 22 22 22 24 35 35 45 45 55 G 11 11 14 14 14 16 16 16 19 19 19 22 22 22 25 38 38 50 50 60 M M M M M M M M M M M M M M M M M M M M - PART No. 3 - 2 - TMC 3 - 4 - TMC 6 - 2 - TMC 6 - 4 - TMC 6 - 6 - TMC 8 - 4 - TMC 8 - 6 - TMC 8 - 8 - TMC 10 - 4 - TMC 10 - 6 - TMC 10 - 8 - TMC 12 - 4 - TMC 12 - 6 - TMC 12 - 8 - TMC 16 - 8 - TMC 25 - 12 - TMC 25 - 16 - TMC 30 - 20 - TMC 32 - 20 - TMC 38 - 24 - TMC DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C B A2 T T G F P MALE BRANCH TEE E A1 A1 TMC A Inch OD tube x Male NPT thread T TUBE OD P NPT MALE A 1/8” 1/8” 47.2 1/8” 1/4” 49.2 1/4” 1/8” 53.8 1/4” 1/4” 53.8 1/4” 3/8” 59.4 1/4” 1/2” 63.6 3/8” 1/4” 61.0 3/8” 3/8” 62.4 3/8” 1/2” 66.0 1/2” 1/4” 72.0 1/2” 3/8” 72.0 1/2” 1/2” 72.0 5/8” 1/2” 76.2 3/4” 1/2” 79.8 3/4” 3/4” 79.8 1” 3/4” 98.0 1” 1” 98.0 1.1/4” 1.1/4” 133.0 1.1/2” 1.1/2” 156.0 A1 23.6 24.6 26.9 26.9 29.7 31.8 30.5 31.2 33.0 36.0 36.0 36.0 38.1 39.9 39.9 49.0 49.0 66.5 78.0 A2 17.8 23.4 18.8 23.4 26.2 33.0 25.4 26.2 33.0 28.2 28.2 33.0 35.0 36.8 36.8 41.6 46.5 47.6 60.4 B 9.6 14.3 9.6 14.3 14.3 19.1 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 19.1 19.1 23.8 23.8 26.2 C 12.7 12.7 15.3 15.3 15.3 15.3 16.8 16.8 16.8 22.9 22.9 22.9 24.4 24.4 24.4 31.2 31.2 41.2 50.0 E 2.4 2.4 4.8 4.8 4.8 4.8 7.1 7.1 7.1 4.8 9.6 10.4 11.9 11.9 15.8 15.8 22.3 27.6 34.0 F 11 14 14 14 17 22 17 17 22 22 22 22 22 27 27 35 35 46 55 G 11 11 14 14 14 14 17 17 17 22 22 22 25 28.5 28.5 38 38 50 60 P P P P P P P P P P P P P P P P P P P - PART No. 2 - 2 - TMC 2 - 4 - TMC 4 - 2 - TMC 4 - 4 - TMC 4 - 6 - TMC 4 - 8 - TMC 6 - 4 - TMC 6 - 6 - TMC 6 - 8 - TMC 8 - 4 - TMC 8 - 6 - TMC 8 - 8 - TMC 10 - 8 - TMC 12 - 8 - TMC 12 - 12 - TMC 16 - 12 - TMC 16 - 16 - TMC 20 - 20 - TMC 24 - 24 - TMC 29 DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C E P A1 T G F B MALE RUN TEE T A1 A2 TML A Metric OD tube x Male NPT thread T TUBE OD P NPT MALE A 3 1/8” 41.4 3 1/4” 48.0 6 1/8” 45.8 6 1/4” 50.4 6 3/8” 56.0 8 1/4” 53.2 8 3/8” 56.8 8 1/2” 65.6 10 1/4” 57.7 10 3/8” 57.7 10 1/2” 66.5 12 1/4” 62.2 12 3/8” 62.2 12 1/2” 69.0 16 1/2” 73.1 25 3/4” 90.8 25 1” 95.6 30 1.1/4” 120.0 32 1.1/4” 125.4 38 1.1/2” 144.4 30 A1 23.6 24.6 27.0 27.0 29.8 28.8 30.6 32.6 31.5 31.5 33.5 36.0 36.0 36.0 38.0 49.1 49.1 66.9 72.3 84.0 A2 17.8 23.4 18.8 23.4 26.2 24.4 26.2 33.0 26.2 26.2 33.0 26.2 28.2 33.0 35.1 41.7 46.5 53.1 53.1 60.4 B 9.6 14.3 9.6 14.3 14.3 14.3 14.3 19.1 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 23.8 23.8 23.8 26.2 C 12.9 12.9 15.3 15.3 15.3 16.2 16.2 16.2 17.2 17.2 17.2 22.8 22.8 22.8 24.4 31.3 31.3 39.6 42.0 49.4 E 2.4 2.4 4.8 4.8 4.8 6.3 6.3 6.3 7.1 7.9 7.9 7.1 9.5 9.5 11.9 15.8 21.8 26.2 27.6 33.7 F 11 14 14 14 17 14 17 22 17 17 22 22 22 22 24 35 35 45 45 55 G 11 11 14 14 14 16 16 16 19 19 19 22 22 22 25 38 38 50 50 60 M M M M M M M M M M M M M M M M M M M M - PART No. 3 - 2 - TML 3 - 4 - TML 6 - 2 - TML 6 - 4 - TML 6 - 6 - TML 8 - 4 - TML 8 - 6 - TML 8 - 8 - TML 10 - 4 - TML 10 - 6 - TML 10 - 8 - TML 12 - 4 - TML 12 - 6 - TML 12 - 8 - TML 16 - 8 - TML 25 - 12 - TML 25 - 16 - TML 30 - 20 - TML 32 - 20 - TML 38 - 24 - TML DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C E P A1 T G F B MALE RUN TEE T A1 A2 TML A Inch OD tube x Male NPT thread T TUBE OD P NPT MALE A 1/8” 1/8” 41.4 1/8” 1/4” 48.0 1/4” 1/8” 45.7 1/4” 1/4” 50.3 1/4” 3/8” 55.9 1/4” 1/2” 64.8 3/8” 1/4” 55.9 3/8” 3/8” 57.4 3/8” 1/2” 66.0 1/2” 1/4” 64.2 1/2” 3/8” 64.2 1/2” 1/2” 69.0 5/8” 1/2” 73.1 3/4” 1/2” 76.7 3/4” 3/4” 76.7 1” 3/4” 90.6 1” 1” 95.5 1.1/4” 1.1/4” 114.1 1.1/2” 1.1/2” 138.4 A1 23.6 24.6 26.9 23.4 29.7 31.8 30.5 31.2 33.0 36.0 36.0 36.0 38.1 39.9 39.9 49.0 49.0 66.5 78.0 A2 17.8 23.4 18.8 26.9 26.2 33.0 25.4 26.2 33.0 28.2 28.2 33.0 35.0 36.8 36.8 41.6 46.5 47.6 60.4 B 9.6 14.3 9.6 14.3 14.3 19.1 14.3 14.3 19.1 14.3 14.3 19.1 19.1 19.1 19.1 19.1 23.8 23.8 26.2 C 12.7 12.7 15.3 15.3 15.3 15.3 16.8 16.8 16.8 22.9 22.9 22.9 24.4 24.4 24.4 31.2 31.2 41.2 50.0 E 2.4 2.4 4.8 4.8 4.8 4.8 7.1 7.1 7.1 4.8 9.6 10.4 11.9 11.9 15.8 15.8 22.3 27.6 34.0 F 11 14 14 14 17 22 17 17 22 22 22 22 22 27 27 35 35 46 55 G 11 11 14 14 14 14 17 17 17 22 22 22 25 28.5 28.5 38 38 50 60 P P P P P P P P P P P P P P P P P P P PART No. - 2 - 2 - TML - 2 - 4 - TML - 4 - 2 - TML - 4 - 4 - TML - 4 - 6 - TML - 4 - 8 - TML - 6 - 4 - TML - 6 - 6 - TML - 6 - 8 - TML - 8 - 4 - TML - 8 - 6 - TML - 8 - 8 - TML - 10 - 8 - TML - 12 - 8 - TML - 12 - 12 - TML - 16 - 12 - TML - 16 - 16 - TML - 20 - 20 - TML - 24 - 24 - TML 31 DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C T T G F B A2 E P A1 FEMALE BRANCH TEE A1 A Metric OD tube x Female NPT thread T TUBE OD P NPT FEMALE A 3 1/8” 49.2 6 1/8” 54.0 6 1/4” 59.6 8 1/8” 59.8 8 1/4” 61.2 10 1/4” 67.0 12 3/8” 72.0 12 1/2” 77.6 16 1/2” 79.0 25 1” 107.2 Inch OD tube x Female NPT thread T TUBE OD P NPT FEMALE A 32 TFC A1 24.6 27.0 29.8 29.9 30.6 33.5 36.0 38.8 39.5 53.6 A2 19.0 19.0 22.4 19.0 22.4 22.4 22.4 28.5 28.5 38.1 B 10.4 10.4 15.0 10.4 15.0 15.0 15.0 19.8 19.8 25.4 C 12.9 15.3 15.3 16.2 16.2 17.2 22.8 22.8 24.4 31.3 E 2.4 4.8 4.8 6.3 6.3 7.9 9.5 9.5 12.7 22.3 F 14 14 19 16 19 19 22 27 27 41 G 11 14 14 16 16 19 22 22 25 38 A1 A2 B C E F G 1/8” 1/4” 1/4” 3/8” 3/8” 1/2” 1/2” 1/8” 1/8” 1/4” 1/4” 3/8” 3/8” 1/2” 49.2 53.8 59.4 62.4 66.6 72.0 77.8 24.6 26.9 29.7 31.2 33.3 36.0 38.9 19.0 19.0 22.4 22.4 22.4 22.4 28.5 10.4 10.4 15.0 15.0 15.0 15.0 19.8 12.7 15.3 15.3 16.8 16.8 22.9 22.9 2.4 4.8 4.8 7.1 7.1 10.4 10.4 14 14 19 19 22 22 27 11 14 14 17 17 22 22 3/4” 1” 1” 3/4” 3/4” 1” 89.4 98.0 107.2 44.7 49.0 53.6 31.8 31.8 38.1 20.6 20.6 25.4 24.4 31.2 31.2 15.8 22.3 22.3 35 35 41 28.5 38 38 M M M M M M M M M M PART No. - 3 - 2 - TFC - 6 - 2 - TFC - 6 - 4 - TFC - 8 - 2 - TFC - 8 - 4 - TFC - 10 - 4 - TFC - 12 - 6 - TFC - 12 - 8 - TFC - 16 - 8 - TFC - 25 - 16 - TFC PART No. P P P P P P P - 2 4 4 6 6 8 8 - 2 2 4 4 6 6 8 - TFC TFC TFC TFC TFC TFC TFC P - 12 - 12 - TFC P - 16 - 12 - TFC P - 16 - 16 - TFC DOUBLE FERRULE COMPRESSION FITTINGS PRODUCTS C E T G F A1 P B FEMALE RUN TEE T A1 A2 TFL A Metric OD tube x Female NPT T TUBE OD P NPT FEMALE 3 1/8” 6 1/8” 6 1/4” 8 1/8” 8 1/4” 10 1/4” 12 3/8” 12 1/2” 16 1/2” 25 1” thread A 43.6 46.0 52.2 48.9 53.0 55.9 58.4 67.3 68.0 91.7 Inch OD tube x Female NPT thread T TUBE OD P NPT FEMALE A A1 24.6 27.0 29.8 29.9 30.6 33.5 36.0 38.8 39.5 53.6 A2 19.0 19.0 22.4 19.0 22.4 22.4 22.4 28.5 28.5 38.1 B 10.4 10.4 15.0 10.4 15.0 15.0 15.0 19.8 19.8 25.4 C 12.9 15.3 15.3 16.2 16.2 17.2 22.8 22.8 24.4 31.3 E 2.4 4.8 4.8 6.3 6.3 7.9 9.5 9.5 12.7 22.3 F 14 14 19 16 19 19 22 27 27 41 G 11 14 14 16 16 19 22 22 25 38 A1 A2 B C E F G 1/8” 1/4” 1/4” 3/8” 3/8” 1/2” 1/2” 1/8” 1/8” 1/4” 1/4” 3/8” 3/8” 1/2” 43.6 45.9 52.1 53.6 55.7 58.4 67.4 24.6 26.9 29.7 31.2 33.3 36.0 38.9 19.0 19.0 22.4 22.4 22.4 22.4 28.5 10.4 10.4 15.0 15.0 15.0 15.0 19.8 12.7 15.3 15.3 16.8 16.8 22.9 22.9 2.4 4.8 4.8 7.1 7.1 10.4 10.4 14 14 19 19 22 22 27 11 14 14 17 17 22 22 3/4” 1” 1” 3/4” 3/4” 1” 76.5 80.8 91.7 44.7 49.0 53.6 31.8 31.8 38.1 20.6 20.6 25.4 24.4 31.2 31.2 15.8 22.3 22.3 35 35 41 28.5 38 38 M M M M M M M M M M - PART No. 3 - 2 - TFL 6 - 2 - TFL 6 - 4 - TFL 8 - 2 - TFL 8 - 4 - TFL 10 - 4 - TFL 12 - 6 - TFL 12 - 8 - TFL 16 - 8 - TFL 25 - 16 - TFL PART No. P P P P P P P - 2 4 4 6 6 8 8 - 2 2 4 4 6 6 8 - TFL TFL TFL TFL TFL TFL TFL P - 12 - 12 - TFL P - 16 - 12 - TFL P - 16 - 16 - TFL 33 PRODUCTS F T G DOUBLE FERRULE COMPRESSION FITTINGS C TUBE END CLOSURE A TT Metric OD tube T TUBE OD 3 6 8 10 12 14 15 16 18 20 22 25 28 30 32 38 A 20.1 23.1 24.5 26.6 29.1 29.9 29.9 29.9 31.4 34.0 34.0 38.5 48.5 53.4 55.8 65.4 C 12.9 15.3 16.2 17.2 22.8 24.4 24.4 24.4 24.4 26.0 26.0 31.3 36.6 39.6 42.0 49.4 F 11 14 16 17 22 24 24 24 27 32 32 35 41 46 46 55 G 11 14 16 19 22 25 25 25 30 32 32 38 46 50 50 60 PART No. M - 3 - TT M - 6 - TT M - 8 - TT M - 10 - TT M - 12 - TT M - 14 - TT M - 15 - TT M - 16 - TT M - 18 - TT M - 20 - TT M - 22 - TT M - 25 - TT M - 28 - TT M - 30 - TT M - 32 - TT M - 38 - TT Inch OD tube T TUBE OD A C F G PART No. 34 1/16” 13.0 8.6 11 8 1/8” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1.1/4” 1.1/2” 20.0 23.4 24.4 25.7 29.2 30.0 31.5 34.0 38.4 53.3 64.5 12.7 15.3 16.3 16.8 22.9 24.4 24.4 25.9 31.2 41.2 50.0 11 14 16 17 22 24 27 35 35 46 55 11 14 16 17 22 25 28.5 32 38 50 60 P - 1 - TT P P P P P P P P P P P - 2456810 12 14 16 20 24 TT TT TT TT TT - TT - TT - TT - TT - TT - TT PRODUCTS T G DOUBLE FERRULE COMPRESSION FITTINGS FITTING END CLOSURE Metric OD tube T TUBE OD 3 6 8 10 12 14 15 16 18 20 22 25 28 30 32 38 G 11 14 16 19 22 25 25 25 30 32 32 38 46 50 50 60 TR PART No. M - 3 - TR M - 6 - TR M - 8 - TR M - 10 - TR M - 12 - TR M - 14 - TR M - 15 - TR M - 16 - TR M - 18 - TR M - 20 - TR M - 22 - TR M - 25 - TR M - 28 - TR M - 30 - TR M - 32 - TR M - 38 - TR Inch OD tube T TUBE OD 1/16” 1/8” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1.1/4” 1.1/2” G 8 11 14 16 17 22 25 28.5 32 38 50 60 PART No. P - 1 - TR P - 2 - TR P - 4 - TR P - 5 - TR P - 6 - TR P - 8 - TR P - 10 - TR P - 12 - TR P - 14 - TR P - 16 - TR P - 20 - TR P - 24 - TR 35 PRODUCTS T G DOUBLE FERRULE COMPRESSION FITTINGS NUT D A Metric OD tube T TUBE OD 3 6 8 10 12 14 15 16 18 20 22 25 28 30 32 38 A 12 12.7 13.5 15.1 17.5 17.5 17.5 17.5 17.5 17.5 17.5 20.6 30.6 32.7 31.8 38.1 G 11 14 16 19 22 25 25 25 30 32 32 38 46 50 50 60 Inch OD tube T TUBE OD 1/16” 1/8” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1.1/4” 1.1/2” A 17.8 12.0 12.7 14.0 14.5 17.5 17.5 17.5 17.5 20.6 31.8 38.0 G 8 11 14 16 17 22 25 28.5 32 38 50 60 36 PART No. M-3-D M-6-D M-8-D M - 10 - D M - 12 - D M - 14 - D M - 15 - D M - 16 - D M - 18 - D M - 20 - D M - 22 - D M - 25 - D M - 28 - D M - 30 - D M - 32 - D M - 38 - D PART P-1P-2P-4P-5P-6P-8P - 10 P - 12 P - 14 P - 16 P - 20 P - 24 No. D D D D D D -D -D -D -D -D -D DOUBLE FERRULE COMPRESSION FITTINGS T PRODUCTS FRONT FERRULE Inch OD tube T TUBE OD PART No. M - 3 - FA M - 6 - FA M - 8 - FA M - 10 - FA M - 12 - FA M - 14 - FA M - 15 - FA M - 16 - FA M - 18 - FA M - 20 - FA M - 22 - FA M - 25 - FA M - 28 - FA M - 30 - FA M - 32 - FA M - 38 - FA 1/16” 1/8” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1.1/4” 1.1/2” PART No. P P P P P P P P P P P P - 12456810 12 14 16 20 24 FA FA FA FA FA FA - FA - FA - FA - FA - FA - FA T Metric OD tube T TUBE OD 3 6 8 10 12 14 15 16 18 20 22 25 28 30 32 38 FA BACK FERRULE Metric OD tube T TUBE OD 3 6 8 10 12 14 15 16 18 20 22 25 28 30 32 38 FP PART No. M - 3 - FP M - 6 - FP M - 8 - FP M - 10 - FP M - 12 - FP M - 14 - FP M - 15 - FP M - 16 - FP M - 18 - FP M - 20 - FP M - 22 - FP M - 25 - FP M - 28 - FP M - 30 - FP M - 32 - FP M - 38 - FP Inch OD tube T TUBE OD 1/16” 1/8” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1.1/4” 1.1/2” PART No. P - 1 - FP P - 2 - FP P - 4 - FP P - 5 - FP P - 6 - FP P - 8 - FP P - 10 - FP P - 12 - FP P - 14 - FP P - 16 - FP P - 20 - FP P - 24 - FP 37 PIPE FITTINGS • • • • • GENERAL INFORMATION BULK precision pipe fittings are manufactured in a wide range of configurations Size range from 1/8” to 1” Construction from bar stock or forging materials Threads meet requirements of ANSI B1.20.1, DIN 2999, BSP and ISO 7/1 Male and female threads are protected to ensure their integrity MATERIALS BULK precision pipe fittings are available as standard in 316 Stainless Steel. We can also supply other materials including Brass, Monel, Hastelloy, Inconel, Titanium,… PRESSURE RATING Working pressures are calculated in accordance to ANSI code for pressure piping B 31.1 and showed in the table below. Female pipe end ratings are lower than male pipe end ratings for a given size because the inner and outer diameters of female threads are larger than male pipe threads. NPT SIZE 316SS MALE 316SS FEMALE 1/8" 9.300 6.000 1/4" 7.300 6.000 3/8" 7.000 5.000 1/2" 6.900 4.500 3/4" 6.500 4.200 1" 4.800 4.000 ASSEMBLY INSTRUCTIONS To ensure a leak tight seal, the use of a pipe thread sealant on all NPT threads is recommended. The most effective sealing method is Teflon tape. Pipe thread sealant should be used only on male tapered pipe threads. 1) Clean both male and female tapered threads. 2) Wrap the sealant tape in the direction of the male tapered thread spiral. 3) Make sure tape does not overhang the first thread as the tape could shred and get into the system. 4) Cut off excess tape. NOTE Pipe thread sealants may have lower temperature capabilities than the basic fitting. 38 PIPE FITTINGS PRODUCTS INDEX HOW TO ORDER Type of threads, select the suffix from TAB. 2 Material, select the suffix from TAB. 1 Pipe size (if different) expressed in sixteenths of an inch Type of pipe fitting Pipe size expressed in sixteenths of an inch TABLE 1 TABLE 2 NO SUFFIX = 316 L = 316 L O = BRASS M = MONEL TI = TITANIUM H = HASTELLOY I = INCONEL HEX NIPPLE N HEX REDUCING NIPPLE NR HEX COUPLING M HEX REDUCING COUPLING MR ADAPTER A REDUCING ADAPTER AR REDUCING BUSHING RMF MALE ELBOW GMM NO SUFFIX = NPT ANSI B1.20.1 K = BSPP ISO 228/1, BS 2779 - ISO 228/1 J = BSPT ISO 7/1, BS 21, DIN 2999 40 40 41 41 42 42 42 43 STREET ELBOW GMF FEMALE ELBOW GFF FEMALE TEE FT STREET TEE TS BRANCH TEE TB MALE TEE MT MALE PLUG TM CAP TF 43 43 44 44 44 45 45 45 39 PIPE FITTINGS PIPE FITTINGS PRODUCTS PRODUCTS A P NPT MALE 1/16” 1/8” 1/4” 3/8” 1/2” 3/4” 1” A 25.7 25.7 35.6 36.3 46.7 46.7 58.9 P E P F HEX NIPPLE B 9.6 9.6 14.3 14.3 19.1 19.1 23.8 N E 3.0 4.8 7.1 9.6 11.9 15.8 22.3 F 8 11 14 19 22 27 35 PART 1246812 16 No. N N N N N -N -N HEX REDUCING NIPPLE P NPT MALE 1/8” 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 3/4” 3/4” 1” 1” 40 P1 NPT MALE 1/16” 1/8” 1/8” 1/4” 1/8” 1/4” 3/8” 1/4” 1/2” 1/2” 3/4” NR A 25.7 31.0 31.8 36.3 37.4 41.9 41.9 41.9 46.7 54.1 54.1 E 3.0 4.8 4.8 7.1 4.8 7.1 9.6 7.1 11.9 11.9 15.8 P1 E P F A F 11 14 19 19 22 22 22 27 27 35 35 PART No. 2 - NR - 1 4 - NR - 2 6 - NR - 2 6 - NR - 4 8 - NR - 2 8 - NR - 4 8 - NR - 6 12 - NR - 4 12 - NR - 8 16 - NR - 8 16 - NR - 12 PIPE FITTINGS PIPE FITTINGS PRODUCTS PRODUCTS P E P F HEX COUPLING A P NPT FEMALE 1/8” 1/4” 3/8” 1/2” 3/4” 1” A 20.6 30.3 33.3 39.6 41.2 50.8 M E 8.6 11.4 15.0 18.5 23.9 29.7 F 14 19 22 27 32 41 PART No. 2-M 4-M 6-M 8-M 12 - M 16 - M HEX REDUCING COUPLING P NPT FEMALE 1/4” 3/8” 1/2” 1/2” 1/2” 3/4” 3/4” 1” 1” P1 NPT FEMALE 1/8” 1/4” 1/8” 1/4” 3/8” 1/4” 1/2” 1/2” 3/4” MR A 31.0 35.0 39.6 44.5 45.2 46.0 52.3 55.6 57.2 E 8.6 11.4 8.6 11.4 15.0 11.4 18.5 18.5 23.8 P1 E P F A F 19 22 27 27 27 32 32 41 41 PART No. 4 - MR - 2 6 - MR - 4 8 - MR - 2 8 - MR - 4 8 - MR - 6 12 - MR - 4 12 - MR - 8 16 - MR - 8 16 - MR - 12 41 PIPE FITTINGS PRODUCTS P E P F ADAPTER A A P NPT MALE & FEMALE A B E F 1/8” 1/4” 3/8” 1/2” 3/4” 1” 28.0 35.6 37.9 49.3 50.8 57.9 9.6 14.3 14.3 19.1 19.1 23.8 4.8 7.1 9.6 11.9 15.8 22.3 14 19 22 27 32 41 PART No. 246812 16 A A A A -A -A REDUCING ADAPTER AR P1 E P F A P NPT FEMALE P1 NPT MALE A B B1 E F 1/8” 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1” 1” 1/16” 1/8” 1/8” 1/4” 1/8” 1/4” 3/8” 1/4” 3/8” 1/2” 1/4” 1/2” 3/4” 27.7 32.0 33.8 38.1 40.2 44.7 44.5 46.3 46.3 51.3 49.8 54.9 55.2 9.6 14.3 14.3 14.3 19.1 19.1 19.1 19.1 19.1 19.1 23.8 23.8 23.8 9.6 9.6 9.6 14.3 9.6 14.3 14.3 14.3 14.3 19.1 14.3 19.1 19.1 3.0 4.8 4.8 7.1 4.8 7.1 9.6 7.1 9.6 11.9 7.1 11.9 15.8 14 19 22 22 27 27 27 32 32 32 41 41 41 PART No. 246688812 12 12 16 16 16 AR AR AR AR AR AR AR - AR - AR - AR - AR - AR - AR 1 2 2 4 2 4 6 -4 -6 -8 -4 -8 - 12 P1 E P F REDUCING BUSHING A RMF P NPT MALE P1 NPT FEMALE A E F 1/8” 1/4” 3/8” 3/8” 1/2”’ 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1” 1” 1” 1/16” 1/8” 1/8” 1/4” 1/8” 1/4” 3/8” 1/4” 3/8” 1/2” 1/4” 3/8” 1/2” 3/4” 26.2 26.9 21.8 30.3 27.4 27.4 35.8 27.4 27.4 41.4 34.8 34.8 34.8 47.0 4.8 7.1 8.6 9.6 8.6 11.4 11.9 11.4 15.0 15.8 11.4 15.0 18.5 22.3 11 14 19 19 22 22 22 27 27 27 35 35 35 35 42 PART No. 246688812 12 12 16 16 16 16 RMF RMF RMF RMF RMF RMF RMF - RMF - RMF - RMF - RMF - RMF - RMF - RMF 1 2 2 4 2 4 6 -4 -6 -8 -4 -6 -8 - 12 PIPE FITTINGS PRODUCTS A A E P F MALE ELBOW GMM P P NPT MALE 1/8” 1/4” 3/8” E 4.8 7.1 9.6 F 11 14 19 A 22.3 26.7 29.7 PART No. 2 - GMM 4 - GMM 6 - GMM 1/2” 3/4” 1” 11.9 15.8 22.3 22 27 35 36.8 38.9 45.2 8 - GMM 12 - GMM 16 - GMM A A1 P F STREET ELBOW GMF P NPT MALE & FEMALE 1/8” 1/4” 3/8” 1/2” 3/4” 1” E P E F A A1 4.8 7.1 9.6 11.9 15.8 22.3 14 19 22 27 32 35 26.4 29.7 36.0 39.6 48.8 48.5 22.3 26.7 29.7 36.8 38.9 45.2 PART No. 246812 16 GMF GMF GMF GMF - GMF - GMF A P F FEMALE ELBOW A E GFF P P NPT FEMALE E F A 1/8” 1/4” 3/8” 1/2” 3/4” 1” 8.6 11.4 15.0 18.5 23.9 29.7 14 19 22 27 32 35 26.4 29.7 36.1 39.6 48.8 48.5 PART No. 246812 16 GFF GFF GFF GFF - GFF - GFF 43 PIPE FITTINGS PRODUCTS A A1 A1 P P F A1 E FEMALE TEE FT P P NPT FEMALE 1/8” 1/4” 3/8” 1/2” 3/4” 1” A 52.8 59.4 72.0 79.2 97.6 97.0 A1 26.4 29.7 36.0 39.6 48.8 48.5 E 8.67 11.4 15.0 18.5 23.9 29.7 F 14 19 22 27 32 41 PART No. 2 - FT 4 - FT 6 - FT 8 - FT 12 - FT 16 - FT A A2 E P A2 F P A1 STREET TEE TS P NPT MALE & FEMALE 1/8” 1/4” 3/8” 1/2” 3/4” 1” A 48.7 56.4 65.7 76.4 87.7 93.7 A1 26.4 29.7 36.0 39.6 48.8 48.5 A2 22.3 26.7 29.7 36.8 38.9 45.2 P E 8.6 11.4 15.0 18.5 23.9 29.7 F 14 19 22 27 32 41 PART No. 2 - TS 4 - TS 6 - TS 8 - TS 12 - TS 16 - TS A A1 A1 A2 P P F E BRANCH TEE TB P P NPT MALE & FEMALE 1/8” 1/4” 3/8” 1/2” 3/4 1” 44 A A1 A2 E F 52.8 59.4 72.0 79.2 97.6 97.0 26.4 29.7 36.0 39.6 48.8 48.5 22.3 26.7 29.7 36.8 38.9 45.2 8.6 11.4 15.0 18.5 23.9 29.7 14 19 22 27 32 41 PART No. 246812 16 TB TB TB TB - TB - TB PIPE FITTINGS PRODUCTS A A1 A1 P MALE TEE A1 E P F MT P A 44.6 53.4 59.4 A1 22.3 26.7 29.7 B 9.6 14.3 14.3 E 4.8 7.1 9.6 F 11 14 19 PART No. 2 - MT 4 - MT 6 - MT 1/2” 3/4” 1” 73.6 77.8 90.4 36.8 38.9 45.2 19.1 19.1 23.8 11.9 15.8 22.3 22 27 35 8 - MT 12 - MT 16 - MT F P P NPT MALE 1/8” 1/4” 3/8” MALE PLUG TM F 1/16” 1/8” 1/4” 3/8” 1/2” 3/4” 1” 19.0 19.0 24.4 25.2 30.7 30.7 38.1 8 11 14 19 22 27 35 PART No. 1246812 16 TM TM TM TM TM - TM - TM P A F P NPT MALE A CAP A TF P NPT FEMALE A F 1/8” 1/4” 3/8” 1/2” 3/4” 1” 19 23.2 26.2 34.0 36.6 41.2 14 19 22 27 32 41 PART No. 246812 16 TF TF TF TF - TF - TF 45 NOTES 46 NOTES 47 NOTES 48 Dimensions are for reference only, and are subject to change without notice. All rights reserved. All dimension are in millimeters. CAT. N. 2/04 BULK srl Instrument bulk material via Giotto, 7 20032 Cormano - Milano - Italy tel. +39 02.66.30.75.14 +39 02.66.30.74.30 fax +39 02.93.66.43.51 www.gripa.it http://www.bulksrl.it e-mail: info@bulksrl.it