TM
SMBJ5.0-440A/CA
TRANSIENT VOLTAGE SUPPRESSORS
DESCRIPTION
The SMBJ series is designed specifically to protect sensitive electronic equipment
from voltage transients induced by lightning and other transient voltage events.
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package.
• Built-in strain relief.
• Glass passivated junction.
• Excellent clamping capability. SMB/DO-214AA
• Repetition Rate (duty cycle):0.01%.
• Fast response time: typically less than 1.0ps from 0 Volts to V BR for unidirectional types.
• Typical IR less than 1 μA above 10V.
• High Temperature soldering: 260°C/10 seconds at terminals.
• Plastic package has Underwriters Laboratory Flammability 94V-O.
DO-214AA PACKAGE
MECHANICAL DATE
• Case: JEDEC DO214AA. Molded plastic over glass passivated junction.
• Terminal: Solder plated, solderable per MIL-STD-750, Method 2026.
• Polarity: Color band denoted positive end (cathode) except Bidirectional.
• Standard Packaging: 12mm tape (EIA STD RS-481).
• Weight: 0.003 ounce, 0.093 grams.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
UNITS
Peak Puls e Power Dis s ipation on 10/1000us waveform (Note1,Note2, Fig.1).
PPPM
Minimum 600
Watts
Peak Puls e Current of on 10/1000us waveform.(Note1,Fig.3)
I PPM
See Table
Amps
PM(AV)
5.0
Watts
I FSM
100
Amps
TJ , TSTG
-65 to +150
℃
Steady State Power Dis s ipation at TL =75℃,Lead lengths .375”,(9.5mm) (Note2,Fig.5).
Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimpos ed on Rated
Load, (JEDEC Method) (Note 3,Fig.6).
Operating junction and Storage Temperature Range.
Notes:
1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 C per Fig. 2.
2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
SW-PT-P011-B1
Page 1
www.semiwill.com
TM
SMBJ5.0-440A/CA
TRANSIENT VOLTAGE SUPPRESSORS
ELECTRICAL CHARACTERISTICS
Part
Number
UNI-POLAR BI-POLAR
SMBJ5.0A SMBJ5.0CA
Device
Marking
Code
UNI
BI
KE
AE
Reverse
Breakdown
Breakdown
Stand-Off
Voltage
Voltage @IT
Voltage
@IT
VRWM(V)
VBR MIN.(V) VBR MAX.(V)
5.0
6.40
7.00
I T(mA)
10
Maximum
Clamping
Voltage @IPP
VC(V)
9.2
Peak
Pulse
Current
I PP(A)
65.3
Reverse
Leakage
@VRWM
I R(μA)
800
Test
Current
SMBJ6.0A
SMBJ6.5A
SMBJ7.0A
SMBJ7.5A
SMBJ6.0CA
SMBJ6.5CA
SMBJ7.0CA
SMBJ7.5CA
KG
KK
KM
KP
AG
AK
AM
AP
6.0
6.5
7.0
7.5
6.67
7.22
7.78
8.33
7.37
7.98
8.60
9.21
10
10
10
1
10.3
11.2
12.0
12.9
58.3
53.6
50.0
46.6
800
500
200
100
SMBJ8.0A
SMBJ8.5A
SMBJ9.0A
SMBJ8.0CA
SMBJ8.5CA
SMBJ9.0CA
KR
KT
KV
AR
AT
AV
8.0
8.5
9.0
8.89
9.44
10.00
9.83
10.40
11.10
1
1
1
13.6
14.4
15.4
44.2
41.7
39.0
50
20
10
SMBJ10A
SMBJ11A
SMBJ12A
SMBJ13A
SMBJ14A
SMBJ15A
SMBJ16A
SMBJ17A
SMBJ18A
SMBJ20A
SMBJ22A
SMBJ24A
SMBJ26A
SMBJ28A
SMBJ30A
SMBJ33A
SMBJ36A
SMBJ40A
SMBJ10CA
SMBJ11CA
SMBJ12CA
SMBJ13CA
SMBJ14CA
SMBJ15CA
SMBJ16CA
SMBJ17CA
SMBJ18CA
SMBJ20CA
SMBJ22CA
SMBJ24CA
SMBJ26CA
SMBJ28CA
SMBJ30CA
SMBJ33CA
SMBJ36CA
SMBJ40CA
KX
KZ
LE
LG
LK
LM
LP
LR
LT
LV
LX
LZ
ME
MG
MK
MM
MP
MR
AX
AZ
BE
BG
BK
BM
BP
BR
BT
BV
BX
BZ
CE
CG
CK
CM
CP
CR
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
35.3
33.0
30.2
28.0
25.9
24.6
23.1
21.8
20.6
18.6
16.9
15.5
14.3
13.3
12.4
11.3
10.4
9.3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SMBJ43A
SMBJ45A
SMBJ43CA
SMBJ45CA
MT
MV
CT
CV
43.0
45.0
47.80
50.00
52.80
55.30
1
1
69.4
72.7
8.7
8.3
1
1
SMBJ48A
SMBJ51A
SMBJ54A
SMBJ58A
SMBJ60A
SMBJ48CA
SMBJ51CA
SMBJ54CA
SMBJ58CA
SMBJ60CA
MX
MZ
NE
NG
NK
CX
CZ
DE
DG
DK
48.0
51.0
54.0
58.0
60.0
53.30
56.70
60.00
64.40
66.70
58.90
62.70
66.30
71.20
73.70
1
1
1
1
1
77.4
82.4
87.1
93.6
96.8
7.8
7.3
6.9
6.5
6.2
1
1
1
1
1
SMBJ64A
SMBJ70A
SMBJ64CA
SMBJ70CA
NM
NP
DM
DP
64.0
70.0
71.10
77.80
78.60
86.00
1
1
103.0
113.0
5.9
5.3
1
1
SMBJ75A
SMBJ78A
SMBJ85A
SMBJ90A
SMBJ75CA
SMBJ78CA
SMBJ85CA
SMBJ90CA
NR
NT
NV
NX
DR
DT
DV
DX
75.0
78.0
85.0
90.0
83.30
86.70
94.40
100.00
92.10
95.80
104.00
111.00
1
1
1
1
121.0
126.0
137.0
146.0
5.0
4.8
4.4
4.1
1
1
1
1
SMBJ100A SMBJ100CA
NZ
DZ
100.0
111.00
123.00
1
162.0
3.7
1
SW-PT-P011-B1
Page 2
www.semiwill.com
TM
SMBJ5.0-440A/CA
TRANSIENT VOLTAGE SUPPRESSORS
ELECTRICAL CHARACTERISTICS
I T(mA)
Maximum
Clamping
Voltage @IPP
VC(V)
135
1
147
1
144
159
150
167
160
178
ER
170
189
PT
ET
180
201
222
PA
EC
190
209
243.2
SMBJ200CA
PV
EV
200
224
247
1
324
1.9
1
SMBJ210CA
PB
ED
210
231
268.8
1
340
1.8
1
SMBJ220A
SMBJ220CA
PX
EX
220
246
272
1
356
1.7
1
SMBJ250A
SMBJ250CA
PZ
EZ
250
279
309
1
405
1.5
1
SMBJ300A
SMBJ300CA
QE
FE
300
335
371
1
486
1.3
1
SMBJ350A
SMBJ350CA
QG
FG
350
391
432
1
567
1.1
1
SMBJ400A
SMBJ400CA
QK
FK
400
447
494
1
648
0.9
1
SMBJ440A
SMBJ440CA
QM
FM
440
492
543
1
713
0.9
1
Part
Number
Device
Marking
Code
UNI
BI
I PP(A)
Reverse
Leakage
@VRWM
I R(μA)
177
3.4
1
193
3.1
1
1
209
2.9
1
185
1
243
2.5
1
197
1
259
2.3
1
209
1
275
2.2
1
1
292
2.1
1
1
308
2
1
Reverse
Stand-Off
Voltage
VRWM(V)
Breakdown
Voltage
@IT
VBR MIN.(V)
Breakdown
Voltage
@IT
VBR MAX.(V)
UNI-POLAR
BI-POLAR
SMBJ110A
SMBJ110CA
PE
EE
110
122
SMBJ120A
SMBJ120CA
PG
EG
120
133
SMBJ130A
SMBJ130CA
PK
EK
130
SMBJ150A
SMBJ150CA
PM
EM
SMBJ160A
SMBJ160CA
PP
EP
SMBJ170A
SMBJ170CA
PR
SMBJ180A
SMBJ180CA
SMBJ190A
SMBJ190CA
SMBJ200A
SMBJ210A
Test
Current
Peak Pulse
Current
Notes:For bidirectional type having V RWM of 10 volts and less,the I R limit is double.
RATINGS AND CHARACTERISTIC CURVES (T A=25℃ unless otherwise noted)
Figure 1 - Peak Pulse Power Rating Curve
SW-PT-P011-B1
Figure 2 - Pulse Derating Curve
Page 3
www.semiwill.com
TM
SMBJ5.0-440A/CA
TRANSIENT VOLTAGE SUPPRESSORS
Figure 3 - Pulse Waveform
Figure 4 - Typical Junction Capacitance
Figure 5 - Steady State Power Dissipation
Derating Curve
Figure 6 - Maximum Non-Repetitive Forward
Surge Current Uni-Directional Only
PART MARKING SYSTEM
PART NUMBERING SYSTEM
SMBJ 5.0 CA
Cathode Band
Date Code
Suffix
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
XXXX
XXX
Working Peak Reverse Voltage
5.0 = 5.0 VRWM (Volts)
Package
SMBJ = SMB/DO-214AA
Marking Code
SW-PT-P011-B1
Page 4
www.semiwill.com
TM
SMBJ5.0-440A/CA
TRANSIENT VOLTAGE SUPPRESSORS
DIMENSIONS
Millimeters
Item
Inches
Min.
Max.
Min.
Max.
L
4.06
4.57
0.160
0.180
D
3.30
3.94
0.130
0.155
D1
1.95
2.20
0.077
0.086
T
5.21
5.59
0.205
0.220
T1
0.76
1.52
0.030
0.060
d
-
0.20
-
0.008
s
2.13
2.47
0.084
0.097
t
0.152
0.31
0.006
0.012
SMB/DO-214AA
A
B
A
Millimeters
Item
C
Inchs
A
Min.
0.085
Max.
-
Min.
2.160
Max.
-
B
C
0.085
0.107
-
2.160
2.740
-
SOLDERING PARAMETERS
Reflow Condition
Lead–free assembly
Temperature Min (Ts(min ))
Temperature Max (Ts(max))
Time (min to max) (t s)
Ave rage ramp up rate (Liquidus Temp (TL) to pe ak
TS(max) to TL - Ramp-up Rate
Temperature (TL) (Liquidus)
Reflow
Time (min to max) (t s)
Peak Temperature (TP)
150°C
200°C
60 – 180 secs
3°C/second max
3°C/second max
217°C
60 – 150 seconds
Pre Heat
Time within 5°C of actual peak Temperature (tp )
Ramp-down Rate
Time 25°C to peak Temperature (TP )
Do not exceed
SW-PT-P011-B1
+0/- 5
°C
260
20 – 40 seconds
6°C/second max
8 minutes Max.
280°C
Page 5
www.semiwill.com
TM
SMBJ5.0-440A/CA
TRANSIENT VOLTAGE SUPPRESSORS
TAPE AND REEL SPECIFICATION
Dimensions are in inches
(and millimeters)
ORDERING INFORMATION
PART NUMBER
COMPONENT PACKAGE
QTY/REEL
REEL SIZE
SMBJxxxA/CA-T13
DO-214AC
2500
13"
SMBJxxxA/CA-T7
DO-214AC
500
7"
CONTACT US
Headquarters
A Building Caohejing I&E Park Pujiang Minhang Shanghai
China
Web
http://www.semiwill.com
By Telephone
General: 86-21-34637654
Sales: 86-21-34637458
Customer Service: 86-21-34637172
By Email
Sales: sales@semiwill.com
Customer Service: cs@semiwill.com
Technical Support: fae@semiwill.com
By Fax
General: 86-21-34637173
Sales:86-21-39650654
COPYRIGHT ©SEMIWILL 2009 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: SEMIWILL reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: SEMIWILL reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and
technical assistance. SEMIWILL assumes no responsibility with respect to the selection or specifications of such products . SEMIWILL makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose , nor does SEMIWILL assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,consequential or
incidental damages.
LIFE SUPPORT POLICY: SEMIWILL products are not authorized for use in life support systems without written consent from the factory.
SW-PT-P011-B1
Page 6
www.semiwill.com