SECTION
A
Acenti Collection
Premium Grade
INDEX
Acenti® Collection
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A2
Acenti Lighting Controls
Dimmers and Fan Speed Control . . . . . . . . . . . . . .A3
Acenti Switches
15A and 20A Switches . . . . . . . . . . . . . . . . . . . . . .A4
Electronic Timer Switch . . . . . . . . . . . . . . . . . . . . .A4
Manual-ON Occupancy Sensor . . . . . . . . . . . . . . .A4
Acenti Receptacles
Triplex and Duplex . . . . . . . . . . . . . . . . . . . . . . . . .A5
Sixplex and Duplex Surge Protective Receptacles . .A5
Acenti Wallplates and QuickPort® Connectors
Wallplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A6
QuickPort Snap-In Connectors . . . . . . . . . . . . . . . .A7
QuickPort Wallplate Inserts . . . . . . . . . . . . . . . . . .A7
Acenti Collection Index
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
ACENTI COLLECTION FEATURES
Premium Grade Lighting Controls and Devices
THE ACENTI COLLECTION OFFERS A FULL PORTFOLIO OF TECHNICALLY AND AESTHETICALLY
SUPERIOR DEVICES FOR RESIDENTIAL APPLICATIONS.
Acenti lighting controls and switches respond alike; their push pads remain permanently graded. No line breaks
or irregular shadow patterns detract from their pleasing, symmetrical appearance. The Collection includes the
industry’s first triplex receptacle, duplex and sixplex surge protective receptacles, GFCIs, screwless snap-on
wallplates, and QuickPort® multimedia inserts and snap-in connectors.
Acenti Lighting Controls
Lighting and fan speed controls feature a patent-pending return to neutral push pad, multi-location control with
either matching or coordinating remotes, soothing blue LEDs and Acenti’s unique surface alignment system.
Clear housing for visual
confirmation of termination
Multifunction clips for
fastening to wallplate
Back- and sidewiring screw
terminals
Microcontroller with
onboard non-volatile
memory
Air-gap switch
eases service
Acenti Collection
LED brightness
display
Robust MOV for superior
surge protection
Dim/bright bar
Built-in radio/TV
interference filter
Features and Benefits
Return-to-neutral
push pad
High-grade triac for
superior reliability
I
Efficient construction with consistent form factor, excellent
ergonomic traits and precision feel
I Innovative contoured geometry* offers an exclusive
aesthetic design
I Clean multi-gang installation with no dividers between devices
I Devices and wallplates molded from engineering-grade
polymer with subtle matte finish and flawless color match
Locator LED
ACI06-1LW
I
Screwless wallplates snap onto device’s TOX®-fastened
multifunction clips
I Brushed and polished metal finish wallplates available to
coordinate with premium grade appliances
I Meet all applicable UL, CSA, NOM and FCC requirements
I Backed by a Five-Year Limited Warranty
* U. S. and Foreign Patents Pending.
TOX® is a registered trademark of TOX PRESSOTECHNIK, LLC.
ACENTI BY LEVITON…DOWN TO THE LAST DETAIL
A
Switches
Return-to-neutral push pad with
blue LED locator. 15A electronic
(single-pole or multi-location) and
20A electromechanical models
(120 & 277V in SP, 3W, 4W).
ACS15-1LW shown
Triplex & Duplex
Receptacles
Exclusive space-saving Triplex
Receptacle in NEMA 5-15R
and 5-20R configurations.
Duplex models also available.
AC315-W shown
GFCI, Sixplex & Duplex Surge
Protective Receptacles
GFCIs feature lockout action for
added safety. Exclusive Sixplex Surge
Receptacle saves space and helps
protect sensitive electronic equipment.
ACSR6-W shown
Wallplates
Screwless snap-on design provides
smooth, clean look exclusively for
all Acenti devices. Brushed stainless steel versions available.
ACWP1-W shown
learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
2Courtesy of Steven Engineering,To Inc.
● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
ACENTI LIGHTING CONTROLS • 400–1000 WATTS • 120V AC 60Hz
Premium Grade Lighting Controls
Acenti Lighting Controls
All Acenti lighting controls provide single-pole (one location) and 3-way (multi-location) control when used
with Remote unit.
Acenti Controls with LED Locator and Brightness Display 120V AC 60Hz Only U R
ACE06-1L
600W
W, Q, A, S, D, C, G, E
ACX10-1L
1000VA
W, Q, A, S, D, C, G, E
ACH08-1L
8 Amps
W, Q, A, S, D, C, G, E
1.75 (44.5)
ACF01-1L
1.5 Amps
W, Q, A, S, D, C, G, E
ACI06-1LW
AC00R-1L
No load rating
W, Q, A, S, D, C, G, E
AC00R-10
No load rating
W, Q, A, S, D, C, G, E
2.71 (68.8)
COLOR*
W, Q, A, S, D, C, G, E
W, Q, A, S, D, C, G, E
W, Q, A, S, D, C, G, E
ACE04-1L
RATING
600W
600VA (450W)
1000W/
1000VA (800W)
400W
4.79 (121.7)
CAT. NO.
ACI06-1L
ACM06-1L
ACM10-1L
3.28 (83.3)
DESCRIPTION
Acenti Incandescent Dimmer
Acenti Magnetic Low-Voltage Dimmer
Acenti Incandescent/
Magnetic Low-Voltage Dimmer
Acenti Electronic Low-Voltage Dimmer;
Neutral required
Acenti Electronic Low-Voltage Dimmer;
Neutral required
Acenti Advance Mark 10™ Powerline or
Tu-Wire™ Fluorescent Dimmer; Neutral required
Acenti Hi-lume® or Eco-10™ (Eco-Series)
Fluorescent Dimmer; Neutral required
Acenti Quiet Fan Speed Control
(LED Display denotes speed); Neutral required
Matching Remote Unit to 120V Dimmers/Fan
Speed Control for 3-Way or up to 5 locations;
Neutral required
Coordinating Remote Unit to 120V Dimmers/Fan
Speed Control for 3-Way or up to 10 locations,
no LED; Neutral required†
W, Q, A, S, D, C, G, E
1.40
(35.6)
2.71 (68.8)
3.28 (83.3)
Acenti Colors
Alabaster (-W) Quartz (-Q)
Natural (-A)
Sand (-S)
Driftwood (-D)
Cocoa (-C)
Slate (-G)
Note: Wallplates are also available in Brushed Stainless Steel, Polished Chrome and 24K Gold finishes.
Custom premium colors available.
Onyx (-E)
1.75 (44.5)
1.37
(34.8)
ACE06-1LW
Acenti Collection
CAUTION ON RETROFITS: When retrofitting Mark 10™ Powerline dimming ballasts into fixtures that originally had Instant
Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent damage to the dimming ballast. Refer to the instructions provided with the ballast and the Leviton dimmer.
4.79 (121.7)
† Except when used with incandescent or magnetic low-voltage dimmers.
Maximum Load per Acenti Device
CAT. NO.
ACE04-1L
ACE06-1L
ACF01-1L
ACH08-1L
ACI06-1L
ACM06-1L
ACM10-1L
ACX10-1L
SINGLE
400W
600W
1.5A
8A
600W
600VA (450W)
1000W/
1000VA (800W)
1000VA
SPECIFICATIONS AND FEATURES
• Universal design provides crisp actuation with
minimal travel
• Push pad always returns to neutral position
regardless of load status
• Minimum brightness can be adjusted to
comfortable level
• Dim-lock feature allows lights to turn on to a
user-configured level every time
• Soothing blue LED Locator for easy location in
the dark
• Subtle blue LED brightness level display
• Digital circuitry provides eye-pleasing
soft-ON/fade-OFF and extended lamp life;
fade rates are selectable
2-GANG
350W
500W
1.5A
8A
600W
600VA (450W)
800W/
800VA (640W)
800VA
MORE THAN 2-GANG
250W
400W
1.5A
8A
500W
500VA (375W)
650W/
650VA (520W)
650VA
• Protected memory and voltage compensation
maintain light levels after power outages
• Single-pole (one-location) and 3-way (multilocation) switching with Acenti Remote Units
• Built-in radio/TV interference filter
• Terminal screws (back- and side-wire) on select
models ease installation
• Multifunction self-grounding clip snaps onto
wallplate and ensures proper device alignment
• Screwless, snap-on wallplates in matching
and coordinating colors
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
Use Leviton Power Extenders to extend
the load capacity of box-mounted
dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10™ Powerline fluorescent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7™,
OSRAM Sylvania Quicktronic Helios or
equivalent ballasts.
See Section C for more information.
• NOM Certified (#057)
• Meets FCC Part 15
• Backed by a Limited Five-Year Warranty
*COLOR
For color selection, add suffix to catalog number as
follows: Alabaster (-W), Quartz (-Q), Natural (-A),
Sand (-S), Driftwood (-D), Cocoa (-C), Slate (-G),
Onyx (-E).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
A
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
3
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
ACENTI SWITCHES AND ADAPTIVE DEVICES • 120 AND 277V AC
Premium Grade Switches and Adaptive Devices
Acenti Switches
1.75 (44.5)
1.40
(35.6)
Acenti Switches 277V AC
RATING
15 Amp
COLOR*
W, Q, A, S, D, C, G, E
No load
rating
AC0SR-10 No load
rating
AC201-1L 20 Amp
W, Q, A, S, D, C, G, E
AC203-1L
20 Amp
W, Q, A, S, D, C, G, E
AC204-1L
20 Amp
W, Q, A, S, D, C, G, E
CAT. NO.
AC201-7L
RATING
20 Amp
COLOR*
W, Q, A, S, D, C, G, E
AC203-7L
20 Amp
W, Q, A, S, D, C, G, E
AC204-7L
20 Amp
W, Q, A, S, D, C, G, E
AC0SR-1L
W, Q, A, S, D, C, G, E
W, Q, A, S, D, C, G, E
UR
DESCRIPTION
Acenti 20-Amp Non-Dimming Electromechanical
Switch for Single-Pole Applications, with LED Locator
Acenti 20-Amp Non-Dimming Electromechanical
Switch for 3-Way Applications, with LED Locator
Acenti 20-Amp Non-Dimming Electromechanical
Switch for 4-Way Applications, with LED Locator
2.71 (68.8)
Acenti Electronic Timer Switch 120V AC 60Hz Only U R
DESCRIPTION
Acenti Timer Switch with Four Preset
Buttons and OFF, LED Locator; Neutral required.
3-Wire, Single-Pole, 1000W Incandescent,
20A Inductive, 1 HP @ 120V
CAT. NO.
ACT60-L
INTERVAL
10-2030-60
Minutes
COLOR*
W, A
Acenti Manual-ON Occupancy Sensor 120V AC 60Hz Only U R
1.75 (44.5)
DESCRIPTION
CAT. NO.
Manual-ON Occupancy Sensor, CEC Title 24 Compliant, ACP15-CB
Single-Pole, 3-Way or more when used with ACP0R
Remote or Acenti Switch Remotes AC0SR-1L and
AC0SR-10; Neutral required. With LED locator,
180° field of view, 900 sq. ft. coverage.
Manual-ON Occupancy Sensor Remote Unit, 3-Way or ACP0R-CB
more when used with ACP15 Occupancy Sensor or
any Acenti Dimmer; Neutral required. With LED locator,
180° field of view, 900 sq. ft. coverage.
1.40
(35.6)
AC201-1LW
2.60 (66.1)
3.28 (83.3)
4.79 (121.7)
SPECIFICATIONS AND FEATURES
1.75 (44.5)
ACP15-CBW
A
CAT. NO.
ACS15-1L
Acenti Adapted Devices
2.38 (83.3)
4.79 (121.7)
ACS15-1LW
Acenti Collection
UR
DESCRIPTION
Acenti 15-Amp Non-Dimming Electronic Switch
for Single-Pole, 3-Way or More Applications,
with LED Locator; Neutral required
Matching Remote Unit to ACS15-1L Switch for 3-Way
or up to 5 locations, with LED Locator; Neutral required
Coordinating Remote Unit to ACS15-1L Switch for
3-Way or up to 10 locations, no LED; Neutral required
Acenti 20-Amp Non-Dimming Electromechanical Switch
for Single-Pole and Motor Loads, with LED Locator
Acenti 20-Amp Non-Dimming Electromechanical
Switch for 3-Way Applications, with LED Locator
Acenti 20-Amp Non-Dimming Electromechanical
Switch for 4-Way Applications, with LED Locator
2.71 (68.8)
3.28 (83.3)
4.79 (121.7)
Acenti Switches 120V AC
1.35
(34.3)
Acenti Switches
• Universal design provides crisp actuation with minimal
travel
• Push pad always returns to neutral position regardless of
load status
• Soothing blue Locator LED for easy location in the dark
• ACS15-1L provides single-pole (one-location) and multilocation switching with Acenti Remote Units
• Terminal screws (back- and side-wire) ease installation
• Multifunction self-grounding clip snaps onto wallplate
and ensures proper device alignment
• Screwless, snap-on wallplates in matching and
coordinating colors
Acenti Electronic Timer Switch
• Four preset buttons plus OFF for timed control of
lights and appliances
• LEDs indicate time elapsed and last LED flashes
two-minutes-until-OFF warning
Acenti Occupancy Sensor
• Manual-ON/Automatic OFF operation in accordance
with California Title 24 2005 requirements
• ACP15 provides true 3-way control when used with
ACP0R Remote – ideal for L-shaped room or any large
rooms
• ACP15 can be used with Acenti Switch Remotes for
true 3-way control where a single sensor provides
RATING
Incandescent:
1800VA,
Fluorescent:
1800W at 120V AC.
Motor: 1⁄2 HP @ 120V AC
No load rating
COLOR*
W, A, E
W, A, E
complete room coverage – ideal for rooms with more
than one entrance
• ACP0R Remote can be used with any Acenti dimmer
for true 3-way control with combined occupancy sensor/
dimmer functionality – ideal for Jack and Jill bathrooms
TESTING AND CODE COMPLIANCE
Switches: • UL Listed (File #E-7458)
• CSA Certified (File #LR-152105)
• Meets NEMA WD-1 & WD-6 requirements
Timer: • UL Listed (File #E-66800)
• CSA Certified (File #LR-68679)
Occupancy Sensor: • UL Listed (File #E-118904)
• CSA Certified (File #LR-152105)
• Conforms to California Title 24 Energy code and FCC
regulations
All Devices: • NOM Certified (#057)
• Backed by a Limited Five-Year Warranty
*COLOR
For color selection, add suffix to catalog number as follows:
Alabaster (-W), Quartz (-Q), Natural (-A), Sand (-S),
Driftwood (-D), Cocoa (-C), Slate (-G), Onyx (-E).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
4Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
ACENTI RECEPTACLES • 15 AMP 125V • 20 AMP 125V
Premium Grade Receptacles
Acenti Receptacles
Acenti Triplex and Duplex Receptacles 125V U R
G
5-15R
Acenti Triplex Receptacle
Acenti Duplex Receptacle
5-20R
W
AC315
W, Q, A, S, D, C, G, E
AC215
W, Q, A, S, D, C, G, E
G
W
AC320
W, Q, A, S, D, C, G, E
AC220
W, Q, A, S, D, C, G, E
2.77 (70.4)
CAT. NO./COLOR*
20A/125V
4.79 (121.7)
CAT. NO./COLOR*
15A/125V
3.28 (83.3)
DESCRIPTION
Acenti GFCI, Sixplex and Duplex Surge Protective Receptacles 125V U R
CAT. NO./COLOR*
20A/125V
Acenti GFCI Receptacle,
20A/125V Feed-Through
Acenti Sixplex Surge Protective
Receptacle, 2-Gang with 6" Leads,
Indicator Light and Audible Alarm
Acenti Duplex Surge Protective
Receptacle with Indicator Light
and Audible Alarm
5-20R
W
AC315-W
1.26
(31.9)
G
W
ACGF1
W, Q, A, S, D, C, G, E
ACSR6
W, Q, A, S, D, C, G, E
ACGF2
W, Q, A, S, D, C, G, E
—
ACSSR
W, Q, A, S, D, C, G, E
—
2.77 (70.4)
G
5-15R
1.80 (45.7)
4.79 (121.7)
CAT. NO./COLOR*
15A/125V
3.28 (83.3)
DESCRIPTION
AC215-W
Acenti Collection
1.80 (45.7)
0.86
(21.9)
3.35 (85.0)
2.77 (70.4)
Surge Protective Receptacles
• Exclusive space-saving Sixplex Surge Protective
Receptacle provides six outlets
• Protect sensitive electronic equipment against
transient voltage surges
• UL 1449 clamping level: 400V
• Audible alarm for protection status
• Soothing blue LED Monitor/Indicator
3.61 (91.7)
ACSR6-W
2.70 (168.6)
• UL Listed (Triplex/Duplex/Surge: File #E-13399,
GFCI: File #E-48380)
• CSA Certified (Triplex/Duplex: File #LR-152105,
GFCI: File #LR-57811, Surge: File #MC152105/LR-406)
• NOM Certified (#057)
• Meets NEMA WD-1 & WD-6 requirements
• Backed by a Limited Five-Year Warranty
4.79 (212.7)
TESTING AND CODE COMPLIANCE
3.28 (83.3)
SPECIFICATIONS AND FEATURES
All Triplex and Duplex Receptacles
• Fit into a standard size wallbox
• Exclusive space-saving Triplex Receptacle accommodates
3 NEMA grounding plugs
• Neat multi-gang installation with no dividers between
devices
• Terminal screws (back and side wire) available for
easier installation
• Multifunction self-grounding clip snaps onto wallplate
and ensures proper device alignment
• Subtle, matte finish complements fine décors
• Molded from engineering-grade polymer for uniformity
and flawless color match
• Screwless, snap-on wallplates in matching and
coordinating colors
GFCI Receptacles
• Patented bridge contact provides individual set of
contacts for GFCI receptacle face and downstream
receptacles
• Patented, advanced technology “dead-face” safety
feature: no power to receptacle face if improperly wired
(line-load reversal)
• Lockout feature for added safety
• Matching TEST and RESET buttons
1.26
(31.9)
3.28 (83.3)
4.79 (121.7)
1.81 (46.0)
*COLOR
For color selection, add suffix to catalog number as follows:
Alabaster (-W), Quartz (-Q), Natural (-A), Sand (-S),
Driftwood (-D), Cocoa (-C), Slate (-G), Onyx (-E).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
1.80 (45.7)
ACGF1-W
1.24
(31.5)
A
5
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
ACENTI WALLPLATES
Premium Grade Wallplates
Acenti Screwless Snap-On Wallplates
4.92 (124.9)
0.30
(7.6)
3.28 (83.4)
DESCRIPTION
COLOR*
ENGINEERING
GRADE
POLYMER
CAT. NO.
ACWP1
BRUSHED
STAINLESS
STEEL
CAT. NO.**
ACWM1-STS
POLISHED
CHROME
CAT. NO.**
24K GOLD
CAT. NO.**
1-Gang
1 Acenti
W, Q, A, S,
D, C, G, E
ACWM1-PCH
ACWM1-24K
2-Gang
2 Acenti
W, Q, A, S,
D, C, G, E
ACWP2
ACWM2-STS
ACWM2-PCH
ACWM2-24K
3-Gang
3 Acenti
W, Q, A, S,
D, C, G, E
ACWP3
ACWM3-STS
ACWM3-PCH
ACWM3-24K
4-Gang
4 Acenti
W, Q, A, S,
D, C, G, E
ACWP4
ACWM4-STS
ACWM4-PCH
ACWM4-24K
5-Gang 5 Acenti
W, Q, A, S,
D, C, G, E
ACWP5
ACWM5-STS
ACWM5-PCH
ACWM5-24K
6-Gang 6 Acenti
W, Q, A, S,
D, C, G, E
ACWP6
ACWM6-STS
ACWM6-PCH
ACWM6-24K
Blank Wallplate Insert
W, Q, A, S,
D, C, G, E
ACW14
—
—
—
Acenti Collection
ACWPI-W
ACWM1-STS
ACWM1-PCH
SPECIFICATIONS AND FEATURES
ACWM1-24K
A
• Exclusively for all Acenti devices
• Screwless snap-on design provides smooth, clean look
• Subtle, matte finish complements fine décor
• Available in engineering-grade polymer, brushed stainless
steel, polished chrome and 24k Gold metal finishes
• Unique, screwless metal finish wallplates
coordinate with premium-grade appliances
• Single-opening design of multi-gang wallplates means
device frames rest side by side, without extra webbing
between them to disrupt clean appearance
• Alignment plate with positioning pins ensures alignment
of device and wallplate
• Snaps easily and directly onto device’s multifunction,
Tox®†-fastened clips, which also provides self-grounding
of device and metal wallplate (when used with a properly
grounded metal wallbox)
• Custom premium colors and QuickPort® jack inserts
available
TESTING AND CODE COMPLIANCE
• UL Listed and CSA Certified
• NOM Certified (#057)
• Meet NEMA Standards WD-1, WD-6 (plastic); Meet
NEMA and ANSI standards (metal)
• Backed by a Limited Five-Year Warranty
*COLOR
For color selection, add suffix to catalog number as
follows: Alabaster (-W), Quartz (-Q), Natural (-A),
Sand (-S), Driftwood (-D), Cocoa (-C), Slate (-G), Onyx (-E).
**STS denotes Stainless Steel, PCH denotes Polished
Chrome and 24K denotes 24k Gold finishes.
†TOX® is a registered trademark of TOX PRESSOTECHNIK, LLC.
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
6Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
ACENTI® QUICKPORT® MULTIMEDIA CONNECTORS AND INSERTS
Premium Grade Multimedia Connectors and Inserts
Acenti® QuickPort Snap-In Connectors and Wallplate Inserts
Acenti QuickPort® Snap-In Connectors
CAT. NO.
AC108-R*5
AC830-B*R
AC830-B*E
AC830-B*Y
AC735-RO*
AC735-RR*
AC735-RW*
AC735-RY*
AC837-B*R
AC837-B*E
AC833-B*R
AC833-B*E
AC084-B*F
AC832-0B*
AC084-F*F
AC831-0B*
AC084-B*B
AC734-SV*
4.80 (121.9)
DESCRIPTION
Cat 5e Jack
RCA Jack w/Red Stripe
RCA Jack w/Black Stripe
RCA Jack w/Yellow Stripe
RCA 110 Termination, Orange Barrel
RCA 110 Termination, Red Barrel
RCA 110 Termination, White Barrel
RCA 110 Termination, Yellow Barrel
Banana Jack w/Red Stripe
Banana Jack w/Black Stripe
Binding Post w/Red Stripe
Binding Post w/Black Stripe
BNC Adapter, Nickel-Plated
BNC Adapter, Gold-Plated
F-Type Adapter, Nickel-Plated
F-Type Adapter, Gold-Plated
Blank Insert
S-Video Module, 110 Termination
1.80 (45.7)
AC644-W
DESCRIPTION
2-Port QuickPort Insert
3-Port QuickPort Insert
4-Port QuickPort Insert
6-Port QuickPort Insert
Alabaster (-W)
Quartz (-Q)
CAT. NO.
AC642
AC643
AC644
AC646
Natural (-A)
Sand (-S)
SPECIFICATIONS AND FEATURES
• Complements complete line of premium grade Acenti
devices
• Provides voice, data, audio and video
• Compatible with the complete collection of Acenti
screwless, snap-on wallplates
TESTING AND CODE COMPLIANCE
Driftwood (-D)
Acenti Collection
Acenti QuickPort® Multimedia Wallplate Inserts
COLOR*
W, Q, A, S, D, C, G, E
W, Q, A, S, D, C, G, E
W, Q, A, S, D, C, G, E
W, Q, A, S, D, C, G, E
Cocoa (-C)
Slate (-G)
Onyx (-E)
*COLOR
When ordering Acenti QuickPort Snap-In Connectors,
insert color description where (*) is indicated. Alabaster
(W), Quartz (Q), Natural (A), Sand (S), Driftwood (D),
Cocoa (C), Slate (G) and Onyx (E).
When ordering Acenti QuickPort Wallplate Inserts, add
suffix to catalog number as follows: Alabaster (-W),
Quartz (-Q), Natural (-A), Sand (-S), Driftwood (-D),
Cocoa (-C), Slate (-G) and Onyx (E).
QuickPort Wallplate Inserts
• UL Listed and CSA Certified
• Meets NEMA Standards WD-1, WD-6
QuickPort Snap-In Connectors and Wallplate Inserts
• Backed by a Limited Five-Year Warranty
A
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
7
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
HOW TO USE THIS CATALOG
The L-101 Leviton Wiring Device Catalog is designed to help you find the device you’re seeking in the quickest and easiest way
possible. Most product sections are divided into three distinct categories in the following sequence—Industrial Grade, Commercial
Grade and Residential Grade—and grouped according to amperage and voltage, lowest to highest. For example, if you need to
order 15 Amp, 125 Volt Industrial Grade straight-blade duplex receptacles, begin your search with the main Table of Contents at the
front of the book. Here you’ll see that all straight blade receptacles are listed in Section G. Turn to Section G for a more detailed Table
of Contents on the first page. Each section page contains product descriptions, ratings and catalog numbers. There are also helpful
highlights including Specifications and Features, Testing and Code Compliance, Color listing, Material Characteristics and dimensioned color product photos. Any product page in the L-101 Catalog can be clearly copied or faxed to customers and prospects for
use as a specifier sheet or as part of a presentation.
The Quick Reference Guide follows the main Table of Contents to help you pinpoint and locate specific products. Technical
Section V provides general product and test data, industry standards, NEMA configuration charts, a glossary of wiring device
terms, ANSI architectural symbols and other related information. Specific catalog numbers are listed in the exhaustive index at
the back of the catalog.
A
B
D
C
G
E
F
H
I
K
L
J
A RATING
E CATALOG NUMBER
I SPECIFICATIONS & FEATURES
B Choose GRADE, if appropriate
F DESCRIPTION
J TESTING AND CODE COMPLIANCE
C DIMENSIONED PHOTOGRAPH
G Check for NEMA CONFIGURATION
K COLOR LISTING
D WIRING/CERTIFICATIONS
H WALLPLATE REFERENCE, if appropriate
L MATERIAL CHARACTERISTICS
A
8
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com