Product Description OSP CABLE PREMISES CABLE The Ground Bus Bar Kit provides a single, versatile solution to create a central ground point at your site. The ground bus bars are manufactured from ¼ inch (6.3 mm) thick solid, tinned copper, and they incorporate 26 pairs of 7⁄16 inch (11.1 mm) holes and 26 pairs of ¼ inch (6.4 mm) holes. By slotting one hole in each pair of 7⁄16 inch holes, the ground bus bar accommodates any lug hole spacing from ¾ inch (19.1 mm) to 1 inch (25.4 mm). Six (6) pairs of 7⁄16 inch holes are incorporated for lug connections to the ground system. TABLE OF CONTENTS Ground Bus Bar Kit Application Material Bus bar: solid, tinned copper Mounting hardware: stainless steel Mounting brackets: galvanized steel Each Kit Includes • One (1) universal ground bar ¼ inch x 24 inch (6.4 mm x 0.6 m) • One (1) mounting hardware set • One (1) mounting bracket set • One (1) installation instruction sheet INDEX Specifications TECH INFO WIRELESS FTTP • Coax protection Part Numbers and Physical Characteristics Rev 7/15 Ed 13.0 Part Number Thickness in (mm) Height in (mm) Width in (mm) Weight lbs (kg) Unit of Measure GB0424TU 0.25 (6.3) 4 (102) 24 (610) 8 (3.6) Kit All information, content, data, specifications, packaging and part numbers detailed herein are subject to change. For the most up-to-date information, please visit SuperiorEssex.com. Purchase of this product is subject exclusively to the then current Superior Essex International LP Terms and Conditions of Sale for Communications and Energy Cable, Wire and Connectivity Products, which can be found on our website, SuperiorEssex.com, or provided to you upon request. 800.551.8948 SuperiorEssex.com D-41