1P
Plugs and Receptacles
Industrial Heavy Duty
Non-Hazardous
Description
Page No.
Application/Selection
964, 965
Arktite® Series
Technical Data
Aluminum AR/APJ Style
20A
30A
60A
100A
200A
400A
Configured Arktite® ARC/APJC Style
Technical Data
30, 60, 100A
Back Boxes
Krydon® NR/NPJ Style
Technical Data
30, 60, 100A
Flanged Panel Mount
Motor Plugs
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
966-969
970
972, 973
974, 975
976, 977
978-980
981, 982
986, 987
988, 989
990, 993
983
984, 985
994, 995
996, 997
963
1P
Plugs and Receptacles
Industrial Heavy Duty
Application and Selection
Application:
ɀ Distribution of secondary electrical power
ɀ Provide quick disconnect from power
source
Considerations for
Selection:
Options:
Electrical System:
ɀ Amperage and voltage required for
application
Wiring system and number of conductors
required. See page 969 for contact sizes.
Compatibility with System:
ɀ Need for interchangeability with plugs in
existing system and within parts of new
system. Grounding styles. Two styles utilized.
See page 967 for complete description to
determine which is suitable for needs.
Mounting Arrangement:
ɀ Three types of mounting available –
surface, flush and panel
Application:
ɀ Fixed receptacle for power outlet; cable
connectors for portable cable extensions
Other Considerations:
ɀ Wire sizes and recess dimensions
available. See page 969 for complete details.
National Electrical Code, UL, NEMA,
Canadian Electrical Code, CSA compliances
ɀ Environment – need for operation in harsh,
dirty or corrosive conditions.
ɀ Special polarity arrangements available as
well as special back boxes and hub
arrangements. See listing pages for details.
Quick Selector Chart
Electrical Characteristics
No. of
Poles
(Range)
Grounding
Style†
Mounting
Mating
Plug
600VAC
250VDC
2-5
1-2
APJ, NPJ, APQ,
AP
30, 60, 100
600VAC
250VDC
3-5
2
APJC, APQC
Fixed
20, 30, 60, 100,
200, 400
600VAC
250VDC
2-5
1-2
Back box (surface)
APJ, NPJ, AP
ARC
Fixed
30, 60, 100
600VAC
250VDC
3-5
2
Back box (surface)
APJC
AR
Fixed
30, 60, 100, 200
600VAC
250VDC
2-4
1-2
Panel mtg. (semi-flush)
APJ, NPJ, AP
NPR
Portable cable
30, 60, 100
600VAC
250VDC
3-4
2
NR
Fixed
30, 60, 100
600VAC
250VDC
3-4
2
Receptacle
Series
Receptacle
Type
Amperage
(Range)
Volts
(Max.)
APR
Portable cable
20, 30, 60, 100,
200, 400
APRC
Portable cable
AR
NPQ, APJ, NPJ
(fixed)
Back box (surface)
† See page 967 for detailed explanation.
964
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
APJ, NPJ
1P
Plugs and Receptacles
Industrial Heavy Duty
Interchangeability Chart
Interchangeability Chart
Many of the plugs listed in this section can be
used interchangeably with receptacles from
other sections, both in hazardous and nonhazardous areas, provided electrical rating
and style of plug and receptacle are the
same. The following table is a summary of
possible combinations.
Plugs
Shown in
Section 1P
Can be Used
with These
Receptacle
Series
Listed in
Section
APJ, NPJ*
DR
2P
30, 60 amp.
2-wire, 2-pole
3-wire, 3-pole
4-wire, 4-pole
2-wire, 3-pole
3-wire, 4-pole
DBR
3P
30, 60, 100 amp.
3-wire, 3-pole
3-wire, 4-pole
FSQ
4P
30 amp.
2-wire, 3-pole
3-wire, 4-pole
EPC, EPCB, EBBR
4P
30, 60, 100 amp.
2-wire, 3-pole
3-wire, 4-pole
NBR, NSR
3P
30, 60, 100 amp.
3-wire, 3-pole
3-wire, 4-pole
WSR
3P
30, 60, 100 amp.
3-wire, 3-pole
3-wire, 4-pole
WSRD
3P
60 amp.
3-wire, 3-pole
3-wire, 4-pole
AR, NR*, NPR*
1P
30 and 60 amp.
2-wire, 3-pole
DR, CES, CESD
2P
FSQ, EPC, EPCB, DBR
4P
DBR, NBR, NSR, WSR,
WSRD
3P
CPH
Plugs &
Receptacle
Electrical
Rating
30 and 60 amp.
3-wire, 4-pole
* NPJ, NR and NPR available in 2-wire, 3-pole and 3-wire, 4-pole electrical ratings only.
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
965
1P
Arktite® Heavy Duty Circuit
Breaking Plugs and Receptacles
NEMA 4 Watertight
Industrial Heavy Duty
Non-Hazardous Areas
illustrated here, is for conditions where it
is desired to use the contact of the plug
sleeve with the detent spring to complete
the grounding safety circuit. The extra
grounding conductor in the portable
cable is connected to the plug sleeve by a
pressure connector.)
Each plug contact fits closely the
opening of its individual arcing chamber.
Grounding contact is bonded to the
plug sleeve. Grounding contact is keyed
to its proper location to prevent
mispolarization.
Arktite connectors’ gasketing system
provides unsurpassed watertight integrity.
All-aluminum UNI-SHELL TM threaded
construction provides added strength to
withstand extreme physical abuse.
Application:
Arktite circuit breaking plugs and receptacles
are used:
ɀ to supply power to portable electrically
operated devices such as motor-generator
sets, compressors, heating and cooling units,
welders, conveyors, lighting systems and
similar equipment
ɀ where temporary power is needed, such as
at trailers, building units, heavy machinery
and similar equipment
ɀ wherever electrical loads must be quickly
disconnected from power source
ɀ in a typical installation, where a large
machine utilizes a number of electrical motor
drives and for ease of adjustment, removal,
maintenance and replacement, each motor is
connected by portable cord and Arktite
receptacles rather than permanently wired
ɀ in areas where dust, dirt, moisture and
corrosion are a problem
ɀ indoors and outdoors in non-hazardous
areas of chemical plants, process industry
facilities, meat packing plants, manufacturing
plants and similar industrial locations
NEW!
NEMA 4
Rating
Features:
ɀ Circuit breaking: Plugs through 200 ampere
rating may be disconnected under load; 400
ampere units are for service disconnect use
only.
ɀ Receptacles accept only plugs of the same
amperage rating, style and number of poles,
making it impossible to mismate, and
provides for positive polarization.
ɀ Extra wide electrical spacing allows for
maximum safety.
ɀ Insulator materials are the result of intensive
testing. Selection has been made based on
highest dielectric strength, maximum
mechanical and impact resistance, lowest
moisture absorption and highest arc tracking
resistance.
ɀ A variety of installations is possible due to
the availability of several types of back boxes.
ɀ Designed to withstand rough usage and the
effects of adverse environments.
ɀ Reversible interiors, 30, 60 and 100 ampere
(except 30 and 60 ampere, 5-pole) Arktite
plug and receptacle interiors are
interchangeable using a screwdriver. This
makes it possible to feed a normally
deenergized receptacle from an energized
plug with usual Arktite safety; no energized
contacts are exposed.
ɀ Additional features are indicated in the view
at right:
Grounding contact in Style 2 is bonded to
the receptacle housing.
Easily wired interior assemblies in
receptacles and plugs. See table on page
938 for type of contacts in units.
Arktite Style 2, illustrated here, has an
extra grounding contact which forms a
parallel circuit with the circuit formed by the
plug sleeve and receptacle detent spring,
and assures continuity of the grounding
966
Arktite Style 2
60 ampere
NEW!
Smaller
Cable
Range
safety circuit under severe service.
Grounding contact is no longer than the
others, so grounding circuit is made
first and broken last.
The arc formed by pulling the plug is
instantly snuffed in the deep, confined
insulated arcing chamber while the plug
contact is still a considerable distance
inside. The arc cannot travel over to the
other side of the circuit or to the
housing.
Detent spring forms a grounding
path from plug sleeve to receptacle
housing. Arktite plugs and receptacles
are made in two styles. With either style,
the portable appliance is grounded
before it is energized and remains
grounded until after it is deenergized.
(Arktite Style 1, not
US: 1-866-764-5454
CAN: 1-800-265-0502
Arktite’s TRI-LOCK TM cable grip has
three clamps that tighten around the
cable to securely lock it in place, even
when subjected to extreme flexing and
jerking.
The unique SURE-SEAL TM cable gland
provides a complete environmental seal
by distributing pressure equally around
the circumference of the cable.
Wrenching surfaces make Arktite
connector quick and easy to assemble.
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Arktite® Heavy Duty Circuit
Breaking Plugs and Receptacles
1P
NEMA 4 Watertight
Industrial Heavy Duty Non-Hazardous Areas
Grounding: Style 1 vs. Style 2
Cooper Crouse-Hinds Arktite devices utilize two methods, or styles, for completing the grounding circuit in plugs and receptacles.
NEC reference 250.138 (A) & (B).
Style 1 – Metallic
STYLE 2 – Metallic
Style 2 – Non-Metallic
A Style 1 plug is one in which the grounding
conductor in the flexible cable is bonded to
the plug sleeve by a pressure connector. A
Style 1 receptacle is one which is grounded
by virtue of the fact that it is an integral part of
a grounded conduit system. On insertion, the
plug sleeve makes contact with detent
springs of the grounded receptacle housing
before line and load poles engage, and on
withdrawal, remains in contact until after line
and load poles disengage. Therefore,
exposed metal parts of the portable
equipment or plug are suitably grounded.
A Style 2 metallic housing plug is one in
which the grounding conductor in the flexible
cable is bonded to the extra (grounding) pole
and metal plug sleeve by a pressure
connector. A Style 2 metallic housing
receptacle is one in which the extra
(grounding) pole is electrically connected to
the equipment grounding conductor and the
metal receptacle housing which itself is
grounded by virtue of the fact that it is an
integral part of a grounded conduit system. In
Style 2, non-metallic housing plugs and
receptacles, the extra pole is used for
grounding since the housings are nonconductive.
In a Style 2 receptacle, the grounding
connection is made before line and load
poles engage, and is broken after the line
load poles disengage. Furthermore, upon
insertion, the plug sleeve of metal shelled
units, makes contact with detent springs of
the grounded receptacle housing before line
and load poles engage, and on withdrawal,
remains in contact until after line and load
poles disengage. Therefore, exposed metal
parts of the portable equipment or plug are
suitably grounded.
Made of
non-metallic
Krydon
material
Metal
shelled
type
Style 2
Ground conductor
attaches to contact,
which is bonded to shell.
Style 1
Ground conductor
attaches to shell.
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
967
1P
Arktite® Heavy Duty Circuit
Breaking§ Plugs and Receptacles
NEMA 4 Watertight
Industrial Heavy Duty Non-Hazardous Areas
Options:
ɀ The following special options are available
from factory by adding suffix to Cat. No.:
Suffix to be
Added to
Cat. # Description
S22. . . . .Reversed contacts. Receptacle
assembled with plug interior
(exposed contacts), plug
assembled with receptacle interior
(recessed contacts). For
applications where plug is
energized to feed normally deenergized receptacle. Available on
30 through 400 ampere units
NOTE: 30 (2, 3, 4-pole), 60 and 100
ampere interiors can be
interchanged in the field using a
screwdriver. Factory conversion is
required for 200 and 400 ampere
products.
S4. . . . . .Special polarity. For use where two
or more receptacles of the same
ampere rating, style and number of
poles are to be installed in the same
area for use on different voltages
and/or frequencies. Prevents
insertion of a plug in a receptacle
with different electrical rating.
Available on 20 through 400 ampere
units as follows:
Receptacle interior rotated 221⁄2
degrees to right and plug changed
to match (See photo to right)
Arktite receptacles have a cast
raised rib located inside the
receptacle sleeve. The location of
the rib is in a specific relationship to
the receptacle insulator that houses
the contacts.
The mating plug has a cast groove
located on the outside of the plug
sleeve. This groove lines up with the
raised rib.
Standard Materials:
ɀ Metallic receptacle housings, plug and cord
connector bodies – high impact strength
copper-free aluminum
ɀ Nonmetallic receptacles, plugs and cord
connectors – Krydon® fiberglass-reinforced
polyester material
ɀ Back boxes: 20, 30, 60, 100 and 200
ampere – cast aluminum; 400 ampere –
Feraloy® iron alloy
ɀ Insulation (metallic products): (2-, 3-, and
4-pole) 30, 60, 100, 200, 400 ampere –
fiberglass-reinforced polyester; 20, 30
ampere (5-pole) – melamine
ɀ Contacts: pressure, solder, binding screw –
brass; crimp/solder – leaded red brass; 20,
30, 60, 100 ampere – telurium copper; 200,
400 ampere
Accessories:
Accessories include a variety of angle adapters, panel adapters and back boxes for Arktite
receptacles, listed on pages 990-993. Included throughout 1P are wire mesh cable grips and
protective caps for Arktite plugs.
Certifications and Compliances:
ɀ UL Standards: 1682, 514; 1010 (APJ and NPJ plugs only)
ɀ CSA Standard: C22.2 No. 182.1
Typical installation
Standard Finishes:
ɀ Feraloy—electrogalvanized and aluminum
acrylic paint
ɀ Aluminum – natural
ɀ Krydon fiberglass-reinforced polyester
material – grey
ɀ Fiberglass-reinforced polyester insulation –
(red)
ɀ Melamine – natural (brown)
ɀ Brass – natural
ɀ Leaded red brass – electro-tin-plate
§ 400A rated units are for service disconnect use only.
968
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Arktite® Heavy Duty Circuit
Breaking§ Plugs and Receptacles
1P
NEMA 4 Watertight
Industrial Heavy Duty Non-Hazardous Areas
Arktite Horsepower Ratings
ɀ Locked-Rotor Interrupting
Electrical
System
Single-phase
Three-phase
ɀ Emergency Interrupting
Ampere
Rating
Plug and
Receptacle
30
60
100
200
Motor Horsepower†
120
240
480
Volts
Volts
Volts
2
3
7.5
5
10
25
10
20
15
40
600
Volts
10
20
30
60
100
200
3
10
15
30
10
50
25
15
5
20
30
60
10
40
40
25
Electrical
System
Single-phase
Three-phase
Ampere
Rating
Plug and
Receptacle
30
60
100
200
H.P. Rating
120
240
Volts
Volts
2
3
5
10
7.5
20
15
40
480
Volts
10
25
30
40
600
Volts
10
20
30
40
30
60
100
200
3
10
10
20
15
40
40
50
20
50
40
50
7.5
20
30
60
Wire Sizes:
The table below lists the diameter of the wire recess in Arktite plug and
receptacle contacts so that maximum size of bare conductor can be
figured. Range of wire sizes shown in table is intended only as a
guide. Depending on type of wire used (building wire, flexible or extra
flexible cable) and its construction (number and size of strands), bare
copper diameters vary widely.
Diameter of Wire Recess in Plug and Receptacle Contacts
Ampere
Rating
20
30 (2, 3, & 4-pole)
30 (2, 3, & 4-pole)
30 (5-pole)
60 (2, 3, 4 & 5-pole)
60 (3 & 4-pole)
100 (2, 3 & 4-pole)
100 (3 & 4-pole)
200 (Std. 3 & 4-pole)
200 (Lg. 3 & 4-pole)
400 (Std. 3 & 4-pole)
400 (Lg. 3 & 4-pole)
Contact
Type
Binding Screw
Pressure
Crimp/Solder
Solder
Pressure
Crimp/Solder
Pressure
Crimp/Solder
Crimp/Solder
Crimp/Solder
Crimp/Solder
Crimp/Solder
Diameter
of Recess
N/A
.281
.180
.188
.312
.277
.390
.390
.56
.75
.84
1.25
Wire Size‡
Building
#14-#12
#10-#6
#10-#8**
#12-#6
#6-#4
#6-#4**
#4-#1
#2-#1**
#1-4/0
4/0-250MCM
250-500MCM
500-1000MCM
Extra Flex
#14-#12
#10-#8
#10-#8
#12-#8
#8-#4
#8-#4
#4-#2
#2-#2
#1-3/0
3/0-250MCM
250-400MCM
400-750MCM
** Smaller sizes may be used with well reducers – information on request.
† Horsepower ratings are based on Cooper Crouse-Hinds testing in which locked-rotor currents were interrupted by
withdrawing the plug from the receptacle. It is highly recommended, however, that such use be limited to emergency
conditions only; and that a horsepower rated switch be used for motor disconnect.
‡ Do not use wire size smaller than minimum size recommended.
§ 400A rated units are for service disconnect use only.
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
969
Notes Page
970
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Arktite® Heavy Duty Circuit Breaking
Receptacles, Plugs and Connectors
1P
NEMA 4 Watertight
20 A, 600 VAC/250 VDC, 50**-400 hertz
Receptacle with Back Box
Config.
2W 2P
2W 2P
Hub Size
1⁄2
1⁄2
3⁄4
3⁄4
Descrip.
Spring Door
Threaded Cap
Spring Door
Threaded Cap
Cat No. #
ARE2211
ARE2271
ARE2212
ARE2272
Receptacle
Config.
2W 2P
Descrip.
Spring Door
Threaded Cap
Cat No. #
AR221
AR227
Plug
Config.
2W 2P
Cable Dia.
.250–.500
.250–.500
Descrip.
Fastening Ring
W/O Fastening Ring
Cat No. #
APJ2271
APJ2251
2W 2P
.500–.875
.500–.875
Fastening Ring
W/O Fastening Ring
APJ2273
APJ2253
Descrip.
Connector
Connector
Cat No. #
APR2251
APR2253
Connector
Config.
2W 2P
Cable Dia.
.250–.500
.500–.850
Dimensions
ARE Assembly
AR Receptacle - Spring Door
AR Receptacle - Open and with cap
APJ Plug
Hub size a
11⁄16
1⁄2
3⁄4
13⁄16
NOTE: For listing of additional back boxes, see pages 999 and 991.
** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only.
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
971
1P
Arktite® Heavy Duty Circuit Breaking
Receptacle Assemblies and Housings
NEMA 4 Watertight
30 A, 600 VAC/250 VDC, 50**-400 hertz
Receptacle Assembly
With ARE Back Boxes
Style 1
Description
Receptacle
Housings Only
Style 1
Mating
APJ Plugs†
Style 1
Hub‡
Size
Spring Door
Cat. #
Spring Door
Cat. #
Threaded Cap
Only Cat. #
2-wire, ⎫
2-pole ⎬⎭
1⁄2
3⁄4
ARE3211
ARE3212
AR321
AR327
3-wire, ⎫
3-pole ⎬⎭
3⁄4
1
ARE3312
ARE3313
AR331
AR337
4-wire, ⎫
4-pole ⎬⎭
3⁄4
1
ARE3412
ARE3413
AR341
AR347
5-wire, ⎫
⎬
5-pole ⎭
1
ARE3513
AR351
Style 2
2-wire, ⎫
3-pole ⎬⎭
Mating
Plug
Receptacle
Style 2
3⁄4
Mating
Connector
Mating APR
Connectors
Style 1
Cat. #
Cable
Dia.
Cat. #
Cable
Dia.
APJ3275
0.39 to 1.20
APR3255
0.39 to 1.20
APJ3375
0.39 to 1.20
APR3355
0.39 to 1.20
APJ3475
0.39 to 1.20
APR3455
0.87 to 1.02
APJ3573
.500 to .875
APR3553
.500 to .875
Style 2
1
ARE3322
ARE3323
AR332
AR338
3-wire, ⎫
4-pole ⎬⎭
3⁄4
1
ARE3422
ARE3423
AR342
AR348
4-wire, ⎫
⎬
5-pole ⎭
1
ARE3523
AR352
Style 2
APJ3575
.875 to 1.375
APR3555
.875 to 1.375
APJ3485
0.39 to 1.20
APR3465
0.39 to 1.20
APJ3583
APJ3585
.500 to .875
.875 to 1.375
APR3563
APR3565
.500 to .875
.875 to 1.375
Dimensions
ARE Assembly
AR Receptacle - Spring Door
Plug
AR Receptacle - Open and with cap
Connector
** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only.
972
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Arktite® Heavy Duty Circuit Breaking
Receptacle Assemblies and Housings
1P
NEMA 4 Watertight
30 A, 600 VAC/250 VDC, 50**-400 hertz
Plug Closure Caps:
Application:
CPK caps for Arktite plugs are used:
ɀ where portable equipment is on a standby
basis and plugs are not in use
ɀ to effectively protect insulation and contacts
from excessive moisture, dirt, dust and
corrosion
ɀ with 30, 60, 100 and 200 ampere plugs with
fastening ring and standard 200 ampere
plugs for the clamp door housing
Standard Materials:
Config.
Cat No. #
2P & 3P & 4P
5P
CPK13
CPK32
ɀ Copper-free aluminum
Standard Finishes:
ɀ Natural
Replacement Parts:
Config.
2W 2P
2W 3P
3W 3P
3W 4P
4W 4P
4W 5P
5W 5P
Receptacle Interior
ATP275
ATP278
ATP276
ATP279
ATP277
ATP125
ATP94
Plug Interior
ATP270
ATP273
ATP271
ATP274
ATP272
ATP109
ATP73
Spring Door
Screw Cap
QE50
QE13
N/A
N/A
Recep
Plug
AR30CONKIT
AP30CONKIT
Replacement Pin & Sleeve Contacts:
Description
Available as a kit only.
5 phase contacts & 1 ground contact included
** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only.
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
973
1P
Arktite ® Heavy Duty Circuit Breaking
Receptacle Assemblies and Housings
NEMA 4 Watertight
60 A, 600 VAC/250 VDC, 50**-400 hertz
Receptacle Assembly
With AJ Back Boxes
and Angle Adapters
Style 1
Description
Hub Spring Door
Size Cat. #
Threaded Cap
Only Cat. #
Mating
Plug
Receptacle
Mating
Connector
with ARE Back
Boxes
Receptacle Housing Only
Spring Door
Cat. #
Spring Door
Cat. #
Threaded Cap
Only Cat. #
Cable
Dia.
Cat. #
Cat. #
2-wire, ⎫
2-pole ⎬⎭
1
11⁄4
AREA6213
AREA6214
ARE6213
ARE6214
AR621
AR627
0.50 to 1.45
APJ6275
APR6255
3-wire, ⎫
3-pole ⎬⎭
1
11⁄4
AREA6313
AREA6314
ARE6313
ARE6314
AR631
AR637
0.50 to 1.45
APJ6375
APR6355
4-wire, ⎫
4-pole ⎬⎭
11⁄4
11⁄2
AREA6414
AREA6415
ARE6414
ARE6415
AR641
0.50 to 1.45
APJ6475
APR6455
5-wire, ⎫
5-pole ⎬⎭
11⁄4
11⁄2
AR657
0.50 to 1.45
APJ6575
AREA6574
AREA6575
Style 2
2-wire, ⎫
3-pole ⎬⎭
1
11⁄4
AREA6323
AREA6324
ARE6323
ARE6324
AR632
AR638
0.50 to 1.45
APJ6385
APR6365
3-wire, ⎫
4-pole ⎬⎭
11⁄4
11⁄2
AREA6424
AREA6425
ARE6424
ARE6425
AR642
AR648
0.50 to 1.45
APJ6485
APR6465
4-wire, ⎫
5-pole ⎬⎭
11⁄4
11⁄2
AR658
0.75 to 1.45
APJ6585
APR6585
APR6567
Dimensions
AREA6584
AREA6585
AR Receptacle - Spring Door
APJ Plug
ARE Assembly
APR Connector
AR Receptacle - Open and with cap
** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only.
974
US: 1-866-764-5454
CAN: 1-800-265-0502
Config
2P or 3P
4P
5P
a
81⁄2
81⁄2
9
Plug
b
c
53⁄4 35⁄8
513⁄16 33⁄4
63⁄16 47⁄16
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Connector
a
b
c
61⁄2 35⁄8 215⁄16
81⁄4 35⁄8 215⁄16
81⁄4 35⁄8 31⁄4
Arktite® Heavy Duty Circuit Breaking
Receptacle Assemblies and Housings
1P
NEMA 4 Watertight
60 A, 600 VAC/250 VDC, 50**-400 hertz
Plug Closure Caps:
Application:
CPK caps for Arktite plugs are used:
ɀ where portable equipment is on a standby
basis and plugs are not in use
ɀ to effectively protect insulation and contacts
from excessive moisture, dirt, dust and
corrosion
ɀ with 30, 60, 100 and 200 ampere plugs with
fastening ring and standard 200 ampere
plugs for the clamp door housing
Standard Materials:
Config.
Cat No. #
2P & 3P
4P
CPK32
CPK34
ɀ Copper-free aluminum
Standard Finishes:
ɀ Natural
Replacement Parts:
Config.
2W 2P
2W 3P
3W 3P
3W 4P
4W 4P
4W 5P
5W 5P
Receptacle Interior
ATP295
ATP298
ATP296
ATP299
ATP297
ATP385
ATP384
Plug Interior
ATP290
ATP293
ATP291
ATP294
ATP292
ATP387
ATP386
Spring Door
Screw Cap
QE51
QE32
QE52
QE34
N/A
N/A
AR:11393B
Recep
Plug
AR60CONKIT
AP60CONKIT
Replacement Pin & Sleeve Contacts:
Description
Available as a kit only.
5 phase contacts & 1 ground contact included
** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only.
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
975
1P
Arktite ® Heavy Duty Circuit Breaking
Receptacle Assemblies and Housings
NEMA 4 Watertight
100 A, 600 VAC/250 VDC, 50**-400 hertz
Receptacle Assembly
Style 1
Receptacle Housings Only
Spring Door Threaded Cap
Cat. #
Only Cat. #
Hub
Description Size
Spring Door
Cat. #
2-wire, ⎫
2-pole ⎬⎭
11⁄2
AREA10214
AREA10215
AR1021
AR1027
3-wire, ⎫
3-pole ⎬⎭
11⁄4
11⁄2
AREA10314
AREA10315
AR1031
AR1037
4-wire, ⎫
4-pole ⎬⎭
11⁄2
2
AREA10415
AREA10416
AR1041
AR1047
Style 2
2-wire, ⎫
3-pole ⎬⎭
11⁄4
11⁄2
AREA10324
AREA10325
AR1032
AR1038
3-wire, ⎫
4-pole ⎬⎭
11⁄2
2
AREA10425
AREA10426
AR1042
AR1048
11⁄4
Mating
Plug
Receptacle
Style 2
Mating
Connector
Cable
Dia.
Cat. #
Cat. #
0.875 to 1.70
APJ10277
APR10257
0.875 to 1.70
APJ10377
APR10357
0.875 to 1.70
APJ10477
APR10457
Style 2
0.875 to 1.70
APJ10387
APR10367
0.875 to 1.70
APJ10487
APR10467
Dimensions
ARE Assembly
AR Receptacle - Spring Door
APJ Plug
No. Poles
f
9⁄32
2 or 3
13
4
⁄32
AR Receptacle - Open and with cap
No. Poles
3
4
APR Connector
No. Poles
2 or 3
4
2 or 3
4
Housing
open
open
with cap
with cap
c
3 3⁄16
3 7⁄16
3 11⁄16
3 7⁄8
No. Poles
3
4
** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only.
976
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
b
6 9⁄16
6 5⁄8
c
3 3⁄4
4 1⁄8
b
3 3⁄8
3 1⁄2
c
3 3⁄16
3 7⁄16
Arktite® Heavy Duty Circuit Breaking
Receptacle Assemblies and Housings
1P
NEMA 4 Watertight
Dimensions Pages 947, 961, 964-966
100 A, 600 VAC/250 VDC, 50**-400 hertz
Plug Closure Caps:
Application:
CPK caps for Arktite plugs are used:
ɀ where portable equipment is on a standby
basis and plugs are not in use
ɀ to effectively protect insulation and contacts
from excessive moisture, dirt, dust and
corrosion
ɀ with 30, 60, 100 and 200 ampere plugs with
fastening ring and standard 200 ampere
plugs for the clamp door housing
Standard Materials:
Config.
Cat No. #
2P & 3P
4P
CPK62
CPK64
ɀ Copper-free aluminum
Standard Finishes:
ɀ Natural
Replacement Parts:
Config.
2W 2P
2W 3P
3W 3P
3W 4P
4W 4P
4W 5P
5W 5P
Receptacle Interior
ATP315
ATP318
ATP316
ATP319
ATP317
N/A
N/A
Plug Interior
ATP310
ATP313
ATP311
ATP314
ATP312
N/A
N/A
Spring Door
Screw Cap
QE53
QE62
QE54
QE64
N/A
N/A
Recep
Plug
AR100CONKIT
AP100CONKIT
Replacement Pin & Sleeve Contacts:
Description
Available as a kit only.
5 phase contacts & 1 ground contact included
** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only.
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
977
1P
Arktite® Heavy Duty Circuit
Breaking Receptacle Assemblies
Weatherproof
200 A, 600 VAC/250 VDC, 50**-400 hertz
See pages 966–969 for general Application, Features, Grounding,
Standard Materials, Standard Finishes, Options, Accessories,
Compliances, Electrical Rating Ranges, and Wire Sizes.
Plug Closure Caps:
Features:
CPK caps for Arktite plugs are used:
ɀ where portable equipment is on a
standby basis and plugs are not in
use
ɀ to effectively protect insulation and
contacts from excessive moisture,
dirt, dust and corrosion
ɀ with 30, 60, 100 and 200 ampere
plugs with fastening ring and
standard 200 ampere plugs for the
clamp door housing
Config.
Standard Materials: 3P
4P
ɀ Copper-free aluminum
ɀ Grounding contact wire terminators will accommodate ground wire
of same size as phase wire.
ɀ Spring band contact design provides multiple points of electrical
contact. Improves electrical reliability and significantly reduces effort
required for insertion and withdrawal
ɀ Crimp/solder type contacts are standard
ɀ Large wire wells are available for ‘‘extra flexible’’ wire
ɀ Larger wire well size connectors will interchange with connectors of
other wire well size of same amperage and contact configuration.
ɀ Self-closing spring doors on receptacles and cord connectors
provide environmental sealing
ɀ Threaded nuts provide positive plug retention
ɀ Two piece plug and cord connector design provide easy installation
NOTES:
1. For listing of additional back boxes, see page 991.
2. S22 suffix for reverse interiors is available from factory only.
Field conversion cannot be done.
3. Replacement interiors for standard units vs. S22 units vary in
length. Specify the unit type when ordering parts.
Application:
Cat No. #
CPK102
CPK104
Standard Finishes:
ɀ Natural
Wire Mesh Grips:
Application:
Wire mesh grips are used:
ɀ to provide secure cable termination
ɀ to extend cable life
ɀ with 20, 200 and 400 ampere plugs
Dimensions
AREA Assembly
Features:
ɀ Eliminate sharp radius of cable bend at the point where cable enters
plug, thereby reducing cable failure
ɀ Absorb longitudinal stresses placed on the point of termination
caused by pulling the cable
ɀ Gripping action increases in direct proportion to amount of tension
applied to cable
Standard Material & Finishes:
ɀ Stainless steel wire braid – Natural
Ordering Information:
Plug
Cable
Range
1.375 to 1.875
1.875 to 2.500
AR Receptacle
No. Poles
3
4
AP Plug
c
4 3⁄16
4 9⁄16
Grip
Range
1.375 to 1.625
1.625 to 1.875
1.875 to 2.000
2.000 to 2.250
Nominal
Grip
Length –
Inches
8
11
10
113⁄4
APR Connector
d
3 1⁄4
3 5⁄8
** For use on system less than 60 hertz the receptacles, plugs and connectors are for disconnect use only.
978
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Grip
Cat. #
K163
K188
K200
K225
Arktite® Heavy Duty Circuit
Breaking Receptacle Assemblies
1P
Weatherproof
200 A, 600 VAC/250 VDC, 50**-400 hertz
Receptacle Assembly
Mating
Plug
Receptacle
With AJ Back Boxes
and Angle Adapters
Mating
Connector
Receptacle Housings
only
Style 1 – Wire Well Takes .56⍯ Maximum Conductor Size
Hub
Spring Door
Spring Door
Description
Size
Cover Cat. #
Cat. #
3-wire,
3-pole
11⁄2
2
21⁄2
AREA20315
AREA20316
AREA20317
4-wire,
4-pole
2
21⁄2
AREA20416
AREA20417
Cable
Dia.
Plug
Cat. #
Connector
Cat. #
AR2031
0.875 to 1.375
1.375 to 1.875
1.875 to 2.500
AP20355
AP20357
AP20358
APR20315
APR20317
APR20318
AR2041
0.875 to 1.375
1.375 to 1.875
1.875 to 2.500
AP20455
AP20457
AP20458
APR20415
APR20417
APR20418
1.375 to 1.875
1.875 to 2.500
AP203511
AP203512
APR203111
APR203112
1.375 to 1.875
1.875 to 2.500
2.500 to 3.000
AP204511
AP204512
AP204513
APR204111
APR204112
APR204113
Style 1 – Wire Well Takes .75⍯ Maximum Conductor Size
3-wire,
3-pole
11⁄2
2
21⁄2
AREA203125
AREA203126
AREA203127
4-wire,
4-pole
2
21⁄2
AREA204126
AREA204127
AR20312
AR20412
Style 2 – Wire Well Takes .56⍯ Maximum Conductor Size
2-wire,
3-pole
11⁄2
2
21⁄2
AREA20325
AREA20326
AREA20327
AR2032
0.875 to 1.375
1.375 to 1.875
1.875 to 2.500
AP20365
AP20367
AP20368
APR20325
APR20327
APR20328
3-wire,
4-pole
11⁄2
2
21⁄2
AREA20425
AREA20426
AREA20427
AR2042
0.875 to 1.375
1.375 to 1.875
1.875 to 2.500
AP20465
AP20467
AP20468
APR20425
APR20427
APR20428
0.875 to 1.375
1.375 to 1.875
1.875 to 2.500
AP203610
AP203611
AP203612
APR203210
APR203211
APR203212
1.375 to 1.875
1.875 to 2.500
AP204611
AP204612
APR204211
APR204212
Style 2 – Wire Well Takes .75⍯ Maximum Conductor Size
2-wire,
3-pole
11⁄2
2
21⁄2
AREA203225
AREA203226
AREA203227
AR20322
3-wire,
4-pole
11⁄2
2
21⁄2
AREA204225
AREA204226
AREA204227
AR20422
Option:
ɀ Mechanical lug wire conductor terminations. Add ‘‘L’’ to catalog prefix i.e. : ARL2042
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
979
1P
Arktite® Heavy Duty Circuit
Breaking Receptacle Assemblies
Weatherproof
200 A, 600 VAC/250 VDC, 50**-400 hertz
200A Replacement Parts
200A Standard and S4
Receptacle Interior
.56 wire well
.75 wire well
Plug Interior
.56 wire well
Brass Retaining Shoe
.75 wire well
.56 wire well
.75 wire well
2W 3P
ATP401
ATP402
ATP433
ATP434
0490335
0490335
3W 3P
ATP397
ATP398
ATP429
ATP430
0490327
0490328
3W 4P
ATP403
ATP404
ATP435
ATP436
0490337
0490337
4W 4P
ATP399
ATP400
ATP431
ATP432
0490331
0490332
200A ST22 and S4 S22
Receptacle Interior
.56 wire well
.75 wire well
Plug Interior
.56 wire well
Brass Retaining Shoe
.75 wire well
.56 wire well
.75 wire well
2W 3P
ATP417
ATP418
ATP449
ATP450
0490335
0490335
3W 3P
ATP413
ATP414
ATP445
ATP446
0490327
0490328
3W 4P
ATP419
ATP420
ATP451
ATP452
0490337
0490337
4W 4P
ATP415
ATP416
ATP447
ATP448
0490331
0490332
Cord Grip
Assembly
Cord Diameter Range
.875 - 1.375
1.375 - 1.875
1.875 - 2.500
AP2 KIT1 M80
AP2 KIT2 M80
AP2 KIT3 M80
Plug Clamp
Nut
Rec Spring
Door
2W 3P
3W 3P
AP:0401965
AR:0401502-2
2W 3P
3W 3P
AP:0401964
AR:0401502-1
Replacement Pin & Sleeve Contacts
200A Standard & S4
Receptacle
.56 wire well
.75 wire well
Phase Contact
Ground Contact
0490339
0490343
0490340
0490344
200A S22 & S4 S22
Receptacle
.56 wire well
.75 wire well
Phase Contact
Ground Contact
980
0490351
0490347
US: 1-866-764-5454
0490352
0490348
CAN: 1-800-265-0502
Plug
.56 wire well
.75 wire well
0490319
0490323
0490320
0490324
Plug
.56 wire well
.75 wire well
0490355T
0490359
0490356
0490360
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Arktite® Heavy Duty Receptacle
Assemblies
1P
Weatherproof
400 A, 600 VAC/250 VDC, 50-400 hertz
Features:
ɀ Grounding contact wire terminators will accommodate ground wire
of same size as phase wire
ɀ Spring band contact design provides multiple points of electrical
contact. Improves electrical reliability and significantly reduces effort
required for insertion and withdrawal
ɀ Crimp/solder type contacts are standard.
ɀ Large wire wells are available for ‘‘extra flexible’’ wire
ɀ Larger wire well connectors will interchange with connectors of other
wire well size, of same amperage and contact configuration.
ɀ Self-closing spring doors on receptacles and cord connectors
provide environmental sealing
ɀ Threaded nuts provide positive plug retention
ɀ Two piece plug and cord connector design provide easy installation
ɀ For disconnect use only – not for current interrupting
NOTES:
1. For listing of additional back boxes, see page 991. Illustration
shows 3 blank plates and 1 hub plate.
2. S22 suffix for reverse interiors is available from factory only.
Field conversion cannot be done.
3. Replacement interiors for standard units vs. S22 units vary in
length. Specify the unit type when ordering parts.
Dimensions
Wire mesh grips are used:
ɀ to provide secure cable termination
ɀ to extend cable life
ɀ with 20, 200 and 400 ampere plugs
Features:
ɀ Eliminate sharp radius of cable bend at the point where cable enters
plug, thereby reducing cable failure
ɀ Absorb longitudinal stresses placed on the point of termination
caused by pulling the cable
ɀ Gripping action increases in direct proportion to amount of tension
applied to cable
Standard Material & Finishes:
ɀ Stainless steel wire braid – Natural
Ordering Information:
Plug
Cable
Range
1.375 to 1.875
AREX Assemblies
Description
With blank
hub plate
With hub
plate max.
Wire Mesh Grips
Application:
1.875 to 2.500
a
Grip
Range
1.375 to 1.625
1.625 to 1.875
1.875 to 2.000
2.000 to 2.250
Nominal
Grip
Length –
Inches
8
11
10
113⁄4
Grip
Cat. #
K163
K188
K200
K225
5⁄16
45⁄8
AP Plugs
AR Receptacles
No. Poles
3
4
c
5 3⁄16
5 13⁄16
US: 1-866-764-5454
APR Connectors
d
4 3⁄16
4 11⁄16
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
981
1P
Arktite® Heavy Duty Receptacle
Assemblies
Weatherproof
400 A, 600 VAC/250 VDC, 50-400 hertz
Receptacle Assembly
Receptacle
Mating
Plug
Mating
Connector
With AJ Back Boxes‡
Receptacle Housings
and Angle Adapters
only
Style 1 – Wire Well Takes .84⍯ Maximum Conductor Size
Hub
Size
Spring Door
Cover Cat.#
Spring Door
Cat. #
Cable
Dia.
Plug
Cat. #
Connector
Cat. #
3-wire,
3-pole
21⁄2
3
AREX40317
AREX40318
AR4031
1.375 to 1.875
1.875 to 2.500
AP40357
AP40358
APR40317
APR40318
4-wire,
4-pole
21⁄2
3
AREX40417
AREX40418
AR4041
1.375 to 1.875
1.875 to 2.500
AP40457
AP40458
APR40417
APR40418
2.500 to 3.000
3.000 to 3.800
AP403510
AP403512
APR403110
APR403112
2.500 to 3.000
3.000 to 3.800
AP404510
AP404512
APR404110
APR404112
1.375 to 1.875
1.875 to 2.500
AP40367
AP40368
APR40327
APR40328
1.375 to 1.875
1.875 to 2.500
AP40467
AP40468
APR40427
APR40428
2.500 to 3.000
3.000 to 3.500
AP403610
AP403612
APR403210
APR403212
2.500 to 3.000
3.000 to 3.500
AP404610
AP404612
APR404210
APR404212
Description
Style 1 – Wire Well Takes 1.25⍯ Maximum Conductor Size
3-wire,
3-pole
3
31⁄2
4
AREX403128
AREX403129
AREX4031210
AR40312
4-wire,
4-pole
4
5
AREX4041210
AREX4041212
AR40412
Style 2 – Wire Well Takes .84⍯ Maximum Conductor Size
2-wire,
3-pole
2
21⁄2
3
AREX40326
AREX40327
AREX40328
AR4032
3-wire,
4-pole
21⁄2
3
AREX40427
AREX40428
AR4042
Style 2 – Wire Well Takes 1.25⍯ Maximum Conductor Size
2-wire,
3-pole
3
31⁄2
4
AREX403228
AREX403229
AREX4032210
AR40322
3-wire,
4-pole
4
5
AREX4042210
AREX4042212
AR40422
† Furnished with cable grip and neoprene bushing.
982
US: 1-866-764-5454
CAN: 1-800-265-0502
‡ Hub plates and blank plates may be interchanged to permit
conduit feed from bottom or sides.
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Non-Metallic Arktite® Heavy Duty Circuit Breaking
Plugs and Receptacles
Made of Krydon® Material, 600 VAC/250 VDC, 50-400 hertz;
1P
Watertight§
Corrosion-Resistant
NEMA 4X
Dimensions Pg. 984
Application:
Arktite circuit breaking
plugs, receptacles, cord
connectors and motor
plugs are used:
ɀ to supply power to
portable electrical devices
such as welders, motors,
pumps, conveyors
and other similar
equipment
ɀ where electrical loads
must be quickly disconnected from power
sources
ɀ in areas where severe corrosion hose
down, moisture, dirt and dust are problems
ɀ indoors and outdoors in non-hazardous
areas of chemical plants, sewage treatment
facilities, cement plants, pulp and paper
plants, food processing plants and other
similar industries
Features:
ɀ Plugs, receptacles, cord connectors, and
motor plugs are molded of Krydon fiberglassreinforced polyester material which is highly
resistant to corrosion, heat, weathering and
physical abuse
2-stage cord sealing system positively
grips cord and protects against
environmental contaminants
Spring door provides environmental
protection of receptacle
ɀ Elastomeric snap-on caps provide
environmental protection of receptacles and
cord connectors
ɀ Threaded construction allows quick
assembly and disassembly for installation or
maintenance
Grounding contact circuit is made first
and broken last
Contact design provides multiple points
of electrical contact for full-load circuit
breaking capability
ɀ Total interchangeability with all existing
Arktite products for comparable ratings and
configurations
Unique environmental sealing system
includes o-ring gaskets on all contacts and
between housing parts for NEMA 4 integrity
Threaded clamping ring provides plug
retention
Pressure contact wire terminals are
standard. Crimp/solder terminals are optional
ɀ NPQ motor plugs and NPR cable
connectors offer reversed interior capability
Unique cord and cable gripping system
provides positive strain relief
Interchangeability of Plugs
With Other Non-Hazardous
and Hazardous Location
Receptacles:
ɀ Plugs listed for use with NRE/NREA
assemblies are standard NPJ Arktite plugs.
Other standard APJ and CPH plugs of the
same rating, style and number of poles may
be used with NR receptacles, as well as with
AR and AREA, receptacles listed in Section
1P, with DR receptacles listed in section 2P,
with DBR, NBR, NSR, WSR, CSR, WSQC,
and WSRD receptacles listed in Section 3P
and with FSQ, EPC, FSQC, W2SR, C2SR and
EPCB receptacles listed in Section 4P.
ɀ Portable equipment, suitable for locations
and equipped with the proper NPJ plug, can
be used with non-hazardous AR receptacles;
with DBR and WSR interlocked receptacles
located in non-hazardous locations; with
EPC, EPCB and FSQC receptacles for Class
I, Groups B, C, D hazardous locations; with
DR and DBR receptacles for Class II, Groups
F, G hazardous locations; and with NBR/
NSR, CSR interlocked receptacles for hose
down and corrosive locations.
Standard
Finishes:
ɀ Krydon material –
natural (gray)
ɀ Neoprene – natural
ɀ Elastomer – natural
ɀ Brass – natural
ɀ Leaded red brass –
electro-tin-plated
ɀ Aluminum – natural
ɀ Stainless steel –
natural
Grounding:
ɀ NPJ plugs are Style 2, which includes a
grounding conductor in the flexible cord or
cable that is electrically connected to the
extra (grounding) pole
ɀ NR receptacles are Style 2, in which the
ground connection is made before line and
load poles engage, and is broken after line
and load poles disengage.
ɀ The National Electrical Code® and
Canadian Electrical Code requires that under
conditions favorable to corrosion, the
grounding conductor for enclosures and
equipment be of copper or other corrosionresistant material in alternating current
systems. This necessitates running another
conductor, usually of copper, back to the
common grounding electrode. This may be
run through the conduit containing the circuit
conductors. At the receptacle, this grounding
conductor should be connected to the extra
(grounding) pole by the pressure connector
provided for that purpose. Where such an
extra ground conductor is required, Style 2
receptacles should be used.
Options:
ɀ Alternate polarization
(4-pole plugs and
receptacles only) –
Style 2 –
receptacle interior
Typical 3-wire,
rotated 221⁄2 degrees to
4-pole plug
right and plug changed
and receptacle
to match – add suffix S4
to Cat. No.
ɀ Crimp/solder terminals – add suffix T to Cat.
No.
ɀ Corro-free TM epoxy powder coat on back
boxes and angle adapters – information on
request
Certifications and
Compliances:
ɀ UL Standard: 1682
ɀ UL 1010 hazardous locations (NPJ plug
only)
ɀ Wet and damp locations, watertight
ɀ CSA Standard C22.2 No. 182.1
Standard Materials:
ɀ Housing, interiors, spring doors, clamping
rings – Krydon fiberglass-reinforced polyester
material
ɀ Gaskets and o-rings – neoprene
ɀ Cable clamping basket – nylon
ɀ Contacts – pressure – brass; crimp/solder –
leaded brass
ɀ Snap-on cap – molded elastomer
ɀ Back boxes – copper-free aluminum
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
983
1P
Non-Metallic Arktite® Heavy Duty Circuit Breaking
Motor Plugs, Plugs & Cord Connectors
Watertight§
Corrosion-Resistant
NEMA 4X
Made of Krydon® Material, 30 A, 60 A and 100 A
600 VAC/250 VDC, 50**–400 hertz
Receptacle
Assembly
NREA
Amps
Description
Receptacle
Mating
Plugs
Snap-on Cap/
Spring Door
Cat. #1
Snap-on Cap/
Spring Door
Cat. #1
Cord
Dia.
Mating
Connectors
Motor Plugs
NRE
Hub
Size
Plug Cat. #
Cord
Connector
Cat. #
Motor
Plug
Cat. #
2-wire,
3-pole
3⁄4
1
NRE3322
NRE3323
NR332
0.55–0.70
0.70–0.85
NPJ3383
NPJ3384
NPR3363
NPR3364
NPQ338
3-wire,
4-pole
3⁄4
1
NRE3422
NRE3423
NR342
0.55–0.70
0.70–0.85
NPJ3483
NPJ3484
NPR3463
NPR3464
NPQ348
2-wire,
3-pole
1
11⁄4
NRE6323
NRE6324
NR632
0.75–1.07
1.07–1.35
NPJ6384
NPJ6385
NPR6364
NPR6365
NPQ638
3-wire,
4-pole
11⁄4
11⁄2
NRE6424
NRE6425
NR642
0.75–1.07
1.07–1.35
NPJ6484
NPJ6485
NPR6464
NPR6465
NPQ648
2-wire,
3-pole
11⁄4
11⁄2
NREA10324‡
NREA10325‡
NR1032
0.93–1.21
1.21–1.50
NPJ10386
NPJ10387
NPR10366
NPR10367
NPQ1038
3-wire,
4-pole
11⁄2
2
NREA10425‡
NREA10426‡
NR1042
0.93–1.21
1.21–1.50
NPJ10486
NPJ10487
NPR10466
NPR10467
NPQ1048
30
60
100
1 Krydon Arktite Receptacles are supplied with both a spring door and snap-on cap.
§ Wet and damp locations when used with spring door or snap-on cap, watertight when used with QE threaded cap.
‡ AJ back boxes are square, making it possible to install with hub in several positions.
** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only.
984
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Non-Metallic Arktite® Heavy Duty Circuit Breaking
Motor Plugs, Plugs & Cord Connectors
1P
Dimensions
Made of Krydon® Material, 30 A, 60 A and 100 A
600 VAC/250 VDC, 50**–400 hertz
Fig. 1 –
30 A Receptacle Assemblies
Fig. 2 –
60 A Receptacle Assemblies
Fig. 3 –
60 and 100 A
Receptacle
Assemblies
NRE 30 and 60 A Assemblies – Fig. 1 NREA 60 and 100 A Assemblies –
and 2
Fig. 3
Hub
Size
3⁄4
1
11⁄4
11⁄2
Dimension a
Dimension b
30 A
13⁄16
15⁄16
30 A
17⁄8
2
60 A
15⁄16
13⁄16
15⁄16
60 A
29⁄16
25⁄8
211⁄16
60 A Hub Size 100 A Hub Size
11⁄4, 11⁄2 2
91⁄4
913⁄16
12
12
19⁄16
19⁄16
1, 11⁄4, 11⁄2
9
11
115⁄16
Dim.
a
b
c
Fig. 6 – NPQ Motor Plugs
Fig. 7 – NPJ Plugs
Fig. 4 –
Spring Door Housings
Amps
Fig. 5 –
Housings with Cap
30
No. Poles
3 or 4
3 or 4
Housing
Spring Door
Open
a
31⁄4
213⁄16
b
33⁄8
33⁄8
c
—
29⁄16
d
23⁄4
23⁄4
e
12-24
12-24
Spring Door
Spring Door
Open
Open
41⁄2
41⁄2
41⁄16
41⁄16
41⁄4
41⁄4
41⁄4
41⁄4
—
—
215⁄16
31⁄4
31⁄2
31⁄2
31⁄2
31⁄2
5⁄16-18
60
3
4
3
4
Spring Door
Spring Door
Open
Open
53⁄4
53⁄4
55⁄16
55⁄16
41⁄4
41⁄4
41⁄4
41⁄4
—
—
33⁄16
37⁄16
31⁄2
31⁄2
31⁄2
31⁄2
5⁄16-18
100
3
4
3
4
Fig. 8 – NPR Cord Connectors
5⁄16-18
5⁄16-18
5⁄16-18
5⁄16-18
5⁄16-18
5⁄16-18
Amps/Poles a
b
NPQ Motor Plugs – Fig. 6
33⁄8
30/3 or 4
23⁄4
60/3 or 4
31⁄2
41⁄4
100/3 or 4
31⁄2
41⁄4
NPJ Plugs – Fig. 7
7
30/3 or 4
81⁄2
60/3
91⁄2
613⁄16
60/4
91⁄2
613⁄16
73⁄4
100/3
111⁄4
73⁄4
100/4
111⁄4
NPR Cord Connectors – Fig. 8
29⁄16
30/3 or 4
87⁄8
60/3
93⁄4
215⁄16
60/4
93⁄4
31⁄4
100/3
111⁄2
33⁄16
100/4
111⁄2
37⁄16
c
215⁄16
45⁄16
57⁄16
33⁄16
35⁄8
4
4
41⁄4
25⁄8
215⁄16
215⁄16
35⁄16
35⁄16
** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only.
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
985
1P
Configured Arktite® Heavy Duty
Power Connectors
Rainproof
30 to 100 A
600 VAC/250 VDC
60-400 hertz
Heavy-Duty and Voltage
Polarized
Configured Arktite® Power Connectors offer
the heavy-duty metal construction of our
standard Arktite line, plus voltage
configuration. This combination is the
ultimate in pin and sleeve connector reliability
and safety. The new Configured Arktite
Connector series incorporates a unique
voltage polarization system that insures that
only receptacles and plugs rated for the
same voltage can be physically connected.
This assures a safe and correct electrical
connection every time. Compliance with the
National Electrical Code® article 210-7
requirement for non-interchangeability of
receptacles and plugs on the same premises
with different voltages is now easier than
ever. Equipment damage due to the
misapplication of the wrong voltage using
these connectors when properly installed can
be virtually eliminated.
This new connector series is not
intermateable with our standard line of Arktite
power connectors, but it utilizes many of the
same time-tested construction features that
have been the proven standard of excellence
in the electrical industry for years. Configured
Arktite Power Connectors are available in 4 or
5 pole (includes ground contact) versions for
30, 60, or 100 amp requirements. Every plug
and receptacle is marked numerically and
color coded for the specific voltage making it
simple and easy to determine the proper plug
and receptacle combination. A larger ground
contact and unique keying system insures
that only the connectors of the same voltage
will intermate. Five distinct configurations are
available covering the most common
voltages in industry.
Configured Arktite Power Connectors are
designed for rugged use in the most abusive
applications. The unique gasketing system
provides a sure seal even in the most adverse
environments. They also feature the Cooper
Crouse-Hinds patented TRI-LOCK TM cable
grip that securely locks the cable in place
even when subjected to extreme flexing and
jerking. The larger ground contact makes
first, breaks last, and is bonded to the metal
housing
to insure all metal parts are properly
grounded. The power contacts are specially
designed and located in arc quenching
chambers to allow these connectors to be
safely disconnected under load. Cooper
Crouse-Hinds Configured Arktite Power
Connectors are designed in compliance with
the latest UL, CSA and NEMA standard.
Applications:
Configured Arktite voltage polarized circuit
breaking plugs and receptacles are used:
ɀ to supply power to portable electrically
operated devices such as motor-generator
sets, compressors, heating and cooling units,
welders, conveyors, lighting systems, and
similar equipment.
ɀ where temporary power is needed, such as
at trailers, building units, heavy machinery,
and similar equipment.
ɀ wherever electrical loads must be quickly
disconnected from a power source.
ɀ in areas where dust, dirt, moisture, and
corrosion are a problem.
ɀ indoors and outdoors in non-hazardous
areas of chemical plants, process industry
facilities, meat packing plants, manufacturing
plants, and similar industrial locations.
Accessories:
Accessories include a variety of angle
adapters, panel adapters, and back boxes for
Configured Arktite receptacles. They include
protective caps for Configured Arktite plugs
and receptacles.
986
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Configured Arktite® Heavy Duty
Power Connectors
1P
Rainproof
30 to 100 A
600 VAC/250 VDC
60-400 hertz
Voltage/Color
Configurations
A 16 position ‘face’ is used to illustrate the
grounding contact location for receptacles.
To identify the system voltage, identify the
housing color and position of the receptacle
grounding contact or marking on the
polarizer.
Standard Materials:
ɀ Metallic receptacle housings, plug, and
connector bodies – high impact strength
copper-free aluminum
ɀ Back boxes – cast aluminum
ɀ Insulators:
3, 4, and 5 pole – fiberglass-reinforced
polyester
ɀ Contacts:
Pressure screw type – brass
ɀ Polarizers – PBT polyester
Standard Finishes:
ɀ Aluminum – natural
ɀ Fiberglass-reinforced polyester insulator –
gray
ɀ Brass – natural
Certifications and
Compliances:
ɀ UL Standards: 1682 and 1686
ɀ CSA Standard: C22.2 No. 182.1
Electrical Rating Ranges:
ɀ Voltage – 600 VAC; 60 to 400 hertz; 250
VDC
ɀ Amperes – 30, 60, and 100
ɀ Horsepower Rating – same as standard
product. See page 969.
Typical Installation:
Catalog Numbering System:
Ordering Configured Arktite is easy.
AR
APJ
APR
APQ
⍧ Arktite Receptacle
⍧ Arktite Plug
⍧ Arktite Connector
⍧ Arktite Motor Plug
AR
Configured
US: 1-866-764-5454
C
3
4
3 ⍧ 30 Amps
6 ⍧ 60 Amps
10 ⍧ 100 Amps
CAN: 1-800-265-0502
C
4 ⍧ 4 Poles
5 ⍧ 5 Poles
C ⍧ 208Y/120 VAC (Blue)
E ⍧ 240 VAC 1X or 3X (Blue)
K ⍧ 208 VAC 3X (Dark Blue)
P ⍧ 480 VAC 1X or 3X (Red)
W ⍧ 600 VAC 3X (Black)
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
987
1P
Configured Arktite® Heavy Duty
Power Connectorsɍ
Rainproof
30/60 A
600 VAC/250 VDC
60-400 hertz
30 Amp Plugs, Receptacles, Connectors, Motor Plugs
Heavy-Duty
Voltage Polarized
Circuit Breaking
NEMA 3R
Rainproof
UL/CSA
Amps
30
30
30
30
30
Poles
4
4
4
4
5
Volt Rating
208 VAC 3X
240 VAC 3X
480 VAC 3X
600 VAC 3X
208Y/120 VAC
Color
Dark Blue
Blue
Red
Black
Blue
Plug
Cat. No.
APJC34K
APJC34E
APJC34P
APJC34W
APJC35C
Receptacle
w/Spring Door*
Cat. No.
ARC34K
ARC34E
ARC34P
ARC34W
ARC35C
Back Box Ordering Information – See pages 990 and 991.
60 Amp Plugs, Receptacles, Connectors, Motor Plugs
Heavy-Duty
Voltage Polarized
Circuit Breaking
NEMA 3R
Rainproof
UL/CSA
Amps
60
60
60
Poles
4
4
5
Volt Rating
480 VAC 3X
600 VAC 3X
208Y/120 VAC
Color
Red
Black
Blue
Plug
Cat. No.
APJC64P
APJC64W
APJC65C
Receptacle
w/Spring Door*
Cat. No.
ARC64P
ARC64W
ARC65C
Back Box Ordering Information – See pages 990 and 991.
ɍ Configured Interlocks are available. – See page 1027.
988
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Configured Arktite® Heavy Duty
Power Connectorsɍ
1P
Rainproof
100 A
600 VAC/250 VDC
60-400 hertz
100 Amp Plugs, Receptacles, Connectors, Motor Plugs
Heavy-Duty
Voltage Polarized
Circuit Breaking
NEMA 3R
Rainproof
UL/CSA
Amps
100
100
100
100
100
Poles
4
4
4
4
5
Volt Rating
208 VAC 3X
240 VAC 3X
480 VAC 3X
600 VAC 3X
208Y/120 VAC
Color
Dark Blue
Blue
Red
Black
Blue
Plug
Cat. No.
APJC104K
APJC104E
APJC104P
APJC104W
APJC105C
Receptacle
w/Spring Door*
Cat. No.
ARC104K
ARC104E
ARC104P
ARC104W
ARC105C
Dimensions
ARC RECEPTACLES
30, 60, 100A
SPRING DOOR
ARC RECEPTACLES
30, 60, 100A
WITH CAP
APJC
PLUGS
ARC Receptacles
Amps
30
30
60
60
100
100
Housing
Spring door
w/cap
Spring door
w/cap
Spring door
w/cap
A
27⁄8
33⁄16
41⁄4
41⁄2
51⁄4
59⁄16
B
33⁄8
33⁄8
41⁄4
41⁄4
41⁄4
41⁄4
Amps
30
60
100
APJC Plugs
A
61⁄2
81⁄2
101⁄8
B
413⁄16
513⁄16
65⁄8
C
215⁄16
33⁄4
41⁄8
C
3
311⁄16
37⁄8
D
223⁄32
223⁄32
31⁄2
31⁄2
31⁄2
31⁄2
E
12-24
12-24
5/16-18
5/16-18
5/16-18
5/16-18
F
3⁄4
9⁄32
13⁄32
ɍ Configured Interlocks are available. – See page 1027.
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
989
1P
AR Back Boxes and
Accessories for 20, 30, & 60 A
Receptacle Housings
Dimensions Pages 992 and 993
For ARRH and
ARRC back boxes
ARRC
ARE
Hub
Size
1⁄2
3⁄4
1
11⁄4
11⁄2
20/30 A
Cat. #
ARE13
ARE23
ARE33
60 A
Cat. #
ARE36
ARE46
ARE56
20/30 A
Cat. #
ARRH13
ARRH23
ARRH33
60 A
Cat. #
ARRH36
ARRH46
ARRH56
990
60 A
Cat. #
ARRC36
ARRC46
ARRC56
AR 15° Angle Adapter
Takes AR
Receptacle
Housings
20 and 30
amp.
AR30
ARRH and ARRC
back boxes
60 amp.
AR60
Steel panel or
cabinet
60 and 100
amp.
AR610
Mounts
On
ARRH and ARRC
back boxes
Hub
Size
1⁄2
3⁄4
1
11⁄4
11⁄2
20/30 A
Cat. #
ARD13
ARD23
ARD33
20/30 A
Cat. #
ARJ13
ARJ23
ARJ33
Cat. #
60 A
Cat. #
ARD36
ARD46
ARD56
Spring Door Assembly
Used With
30 amp, 2, 3 & 4-pole
60 amp, 2 & 3-pole
60 amp, 4-pole
100 amp, 2 & 3-pole
100 amp, 4-pole
Cat. #
QE50
QE51
QE52
QE53
QE54
ARJG
ARJ
Hub
Size
1⁄2
3⁄4
1
11⁄4
11⁄2
20/30 A
Cat. #
ARRC13
ARRC23
ARRC33
ARD
ARRH
Hub
Size
1⁄2
3⁄4
1
11⁄4
11⁄2
Hub
Size
1⁄2
3⁄4
1
11⁄4
11⁄2
For steel panel
or cabinet
60 A
Cat. #
ARJ36
ARJ46
ARJ56
Hub
Size
1⁄2
3⁄4
1
11⁄4
11⁄2
US: 1-866-764-5454
20/30 A
Cat. #
ARJG13
ARJG23
ARJG33
60 A
Cat. #
Cap and Chain
ARJG36
ARJG46
ARJG56
CAN: 1-800-265-0502
Used With
30 amp, 2, 3 & 4-pole
60 amp, 2 & 3-pole
60 amp, 4-pole
100 amp, 2 & 3-pole
100 amp, 4-pole
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Cat. #
QE13
QE32
QE34
QE62
QE64
AJ and AJC Back Boxes with Angle Adapters
for 60, 100, 200 & 400 A Receptacle Housings
AJX Assemblies and Component Parts For 200
and 400 A Receptacle Housings
1P
Dimensions Pages 992 and 993
AJX Assemblies
Back Box with Angle Adapter,
3 Blank Plates and 1 Hub Plate
AJ Back Box with 60/100 A Angle
Adapter
AJ Back Box with 200/400 A Angle Adapter
Hub
Size
2
21⁄2
3
31⁄2
4
5
400 A
Cat. #
AJX69
AJX79
AJX89
AJX929
AJX9210
AJX9212
AJX Component Parts
For use in making up assemblies with
arrangements of hub plates (4 required) other
than those listed.
AJC Back Box with 60/100 A AJA Angle
Adapter
AJC Back Box with 200 A Angle Adapter
AJ and AJC Back Boxes †
60 & 100A
HUB
SIZE
TYPE
BOX
ONLY
200A
BOX & ADAPTER
ASSEMBLY
ONE HUB
AJ56*
AJ37
FEED THRU
AJC56*
AJC37
400A
BOX
ONLY
BOX & ADAPTER
ASSEMBLY
BOX
ONLY
BOX & ADAPTER
ASSEMBLY
AJ71*
AJ58
AJ71*
AJ68
AJ82*
AJ69
AJ71
AJ78
AJ82*
AJ79
1⍯
ONE HUB
AJ56*
AJ47
FEED THRU
AJC56*
AJC47
Back Box
Angle Adapter
400 A
Cat. #
AJX99
400 A
Cat. #
AJ245
11⁄4⍯
ONE HUB
AJ56
AJ57
FEED THRU
AJC56
AJC57
11⁄2⍯
ONE HUB
AJ66
AJ67
FEED THRU
AJC66
AJC67
2⍯
ONE HUB
Hub Plate
21⁄2⍯
FEED THRU
AJC71
AJC78
ONE HUB
AJ82
AJ89
3⍯
FEED THRU
ANGLE ADAPTER
AJA6
AJA1
AJA2
*REDUCER SUPPLIED WITH ASSEMBLY
† AJ and AJC back boxes are square, making it possible to
install with hub in several positions.
‡ Use AJ69, AJ79 or AJ89 for cables up to 2 – #350MCM, 3
– #300MCM or 4 – #250MCM. For larger cables, use AJX69,
etc., listed under assemblies.
US: 1-866-764-5454
CAN: 1-800-265-0502
Hub
Size
2
21⁄2
3
31⁄2
4
5
400 A
Cat. #
YYP96
YYP97
YYP98
YYP99
YYP910
YYP9012
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Blank Plate
400 A Cat. #
YYP900
991
1P
Back Boxes
Dimensions
20, 30 A
60 A
AJX Back Body
ARE
Cat. #
13
23
33
36
46
56
Rating
20, 30A
20, 30A
20, 30A
60 A
60 A
60 A
Size
1⁄2
3⁄4
1
1
11⁄4
11⁄2
a
127⁄32
127⁄32
131⁄32
29⁄16
25⁄8
211⁄16
400 Amperes
b
11⁄16
13⁄16
15⁄16
15⁄16
13⁄16
15⁄16
Hub Plate
Hub
Size
YYP96
2
YYP97
21⁄2
YYP98
3
YYP99
31⁄2
YYP910 4
YYP9012 5
ARJG
Cat. #
13
23
33
36
46
56
Rating
20, 30A
20, 30A
20, 30A
60 A
60 A
60 A
Size
1⁄2
3⁄4
1
1
11⁄4
11⁄2
a
33⁄8
33⁄8
33⁄8
41⁄4
41⁄4
41⁄4
b
415⁄32
415⁄32
419⁄32
55⁄8
511⁄16
53⁄4
c
23⁄4
23⁄4
23⁄4
411⁄16
411⁄16
411⁄16
d
41⁄4
41⁄4
41⁄4
51⁄4
51⁄4
51⁄4
h
Dia.
11⁄32
11⁄32
11⁄32
3⁄8
3⁄8
3⁄8
e
13⁄8
13⁄8
13⁄8
15⁄8
15⁄8
15⁄8
AJ Angle Adapter
AJ and AJC
With 60, 100, 200 and 400 Ampere Angle Adapters
Cat. #
Rating
Size
a
b
57⁄8
8
37, 47, 57 60, 100 A 1, 11⁄4, 11⁄2
8
67
60, 100A
2
57⁄8
8
103⁄4
58, 68, 78 200 A
11⁄2, 2, 21⁄2
1
9
115⁄8
69, 79, 89 400 A
2, 2 ⁄2, 3
992
US: 1-866-764-5454
c
77⁄16
8
97⁄8
1113⁄16
CAN: 1-800-265-0502
d
47⁄8
47⁄8
63⁄4
73⁄4
‘‘A’’
33⁄4
37⁄8
37⁄8
37⁄8
37⁄8
45⁄8
e
7
7
91⁄2
103⁄8
f
15°
15°
45°
45°
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
‘‘B’’
111⁄16
25⁄16
25⁄16
29⁄16
213⁄16
37⁄16
1P
Back Boxes
Dimensions
ARRC and ARRH
Cat. #
13
23
33
36
46
56
Rating
20/30 A
20/30 A
20/30 A
60 A
60 A
60 A
Size
1⁄2
3⁄4
1
1
11⁄4
11⁄2
a
33⁄8
33⁄8
33⁄8
41⁄4
41⁄4
41⁄4
b
55⁄16
55⁄16
55⁄16
61⁄2
61⁄2
61⁄2
c
25⁄8
25⁄8
25⁄8
31⁄2
31⁄2
31⁄2
d
49⁄16
49⁄16
49⁄16
53⁄4
53⁄4
53⁄4
e
21⁄4
21⁄4
21⁄4
31⁄8
31⁄8
31⁄8
f
Dia.
11⁄32
11⁄32
11⁄32
7⁄16
7⁄16
7⁄16
g
11⁄16
13⁄16
15⁄16
13⁄8
13⁄8
13⁄8
AR30 and AR60 Angle Adapters
Cat. #
AR30
AR60
Rating
20/30 A
60 A
a
33⁄8
41⁄4
b
41⁄8
415⁄16
ARD
Cat. #
13
23
33
36
46
56
Rating
20/30 A
20/30 A
20/30 A
60A
60 A
60 A
Size
1⁄2
3⁄4
1
1
11⁄4
11⁄2
a
33⁄8
33⁄8
33⁄8
41⁄4
41⁄4
41⁄4
b
55⁄16
55⁄16
55⁄16
71⁄16
71⁄16
71⁄16
c
323⁄32
323⁄32
323⁄32
53⁄4
53⁄4
53⁄4
d
41⁄4
41⁄4
41⁄4
51⁄8
51⁄8
51⁄8
e
127⁄32
127⁄32
127⁄32
23⁄4
23⁄4
23⁄4
f
Dia.
11⁄32
11⁄32
11⁄32
3⁄8
3⁄8
3⁄8
g
11⁄16
13⁄16
15⁄16
15⁄16
15⁄16
15⁄16
AR610 Angle Adapter
ARJ
Cat. #
13
23
33
36
46
56
Rating
20/30 A
20/30 A
20/30 A
60 A
60 A
60 A
Size
1⁄2
3⁄4
1
1
11⁄4
11⁄2
a
33⁄8
33⁄8
33⁄8
41⁄4
41⁄4
41⁄4
b
35⁄8
35⁄8
35⁄8
411⁄16
411⁄16
411⁄16
US: 1-866-764-5454
c
23⁄4
23⁄4
23⁄4
411⁄16
411⁄16
411⁄16
d
45⁄8
45⁄8
45⁄8
5
5
5
CAN: 1-800-265-0502
e
17⁄32
17⁄32
17⁄32
123⁄32
123⁄32
123⁄32
f
55⁄16
55⁄16
55⁄16
63⁄8
63⁄8
63⁄8
h
Dia.
11⁄32
11⁄32
11⁄32
3⁄8
3⁄8
3⁄8
j
15⁄16
15⁄16
15⁄16
15⁄16
15⁄16
15⁄16
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
993
1P
AR Arktite® Circuit Breaking Round Flange
Receptacle Housings for Panel Mounting
Application:
AR round flange receptacle housings are
designed specifically for semi-flush mounting
in sheet metal panels or cabinets.
Features:
ɀ Back boxes are not needed for these
receptacle assemblies.
ɀ Where wiring behind a panel is exposed
and subject to either mechanical injury or
contact by personnel, suitable shields or
guards should be provided.
APJ Plugs with cable grip,
Neoprene bushing and fastening
ring
Standard Materials:
ɀ Receptacle housings – copper-free
aluminum
ɀ Plug exteriors – copper-free aluminum
ɀ Insulation: 30, 60, 100, 200 ampere –
fiberglass-reinforced polyester
ɀ Pressure and solder contacts – brass
ɀ Crimp/solder contacts – leaded red brass
AR Receptacle housings with
round flange and threaded cap
AP Plugs with cable grip,
Neoprene bushing and fastening
ring
Standard Finishes:
ɀ Copper-free aluminum – natural
ɀ Brass – natural
ɀ Fiberglass-reinforced polyester – natural
(red)
ɀ Leaded red brass – electro-tin-plate
Options:
Available with these assemblies are:
ɀ Reversed interiors (add suffix S22 to Cat.
No.)
ɀ Special polarity (add suffix S4 to Cat. No.)
See page 968 for details.
Certifications and
Compliances:
ɀ UL Standard: 1682
NOTE: For general information on application,
features and grounding, see pages 966 to 969.
994
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
AR Arktite® Circuit Breaking Round Flange
Receptacle Housings for Panel Mounting With
Threaded Cap
1P
Weatherproof
30/60/100/200 A, 600 VAC/250 VDC, AP and APJ Plugs
Amps
30
Style‡ Description
3-wire,
*
1
3-pole
4-wire,
*
4-pole
2
3-wire,
*
4-pole
}
}
}
3-wire,
3-pole
4-wire,
4-pole
3-wire,
4-pole
}*
}*
}*
3-wire,
3-pole
4-wire,
4-pole
3-wire,
4-pole
}*
}*
}*
1
3-wire,
3-pole
}
2
2-wire,
3-pole
}
1
60
2
1
100
2
200
Recept.
Cat. #
Cable
Dia.
Plug
Cat. #
AR6337
0.60 to 1.20
APJ3375
AR6347
0.60 to 1.20
APJ3475
AR6348
0.60 to 1.20
APJ3485
AR6637
0.75 to 1.45
APJ6375
AR6647
0.75 to 1.45
APJ6475
AR6648
0.75 to 1.45
APJ6485
AR61037
1.00 to 1.70
APJ10377
AR61047
1.00 to 1.70
APJ10477
AR61048
1.00 to 1.70
APJ10487
⎧ .875 to 1.375
AR62031ɍ ⎨
⎩ 1.875 to 2.500
⎧ .875 to 1.375
AR62032ɍ ⎨
⎩ 1.875 to 2.500
AP20355
AP20358
AP20365
AP20368
‡ Style 1 – Grounded through shell. Style 2 – Grounded through extra pole and shell.
ɍ 200 ampere size is provided with clamp cover.
* Pressure connectors are standard. Crimp/solder type terminators are optionally available for 2, 3
and 4-pole 30 ampere, 3 and 4-pole 60 and 100 ampere. For details, see table on page 969. To
specify, add the suffix ‘‘T’’ to the catalog number. For example:
APJ3375-T (Plug)
AR6337-T (Receptacle)
Dimensions
AR Round Flange Receptacles
Description
30 amp.
2, 3, 4-pole
60 amp.
2, 3-pole
60 amp.
4-pole
100 amp.
2, 3-pole
100 amp.
4-pole
200 amp.
3-pole
a
2
b
12-24
c
43⁄4
d
27⁄16
e
15⁄8
f
21⁄4
2
12-24
43⁄4
213⁄16
17⁄8
33⁄8
2
12-24
43⁄4
31⁄8
17⁄8
33⁄8
2
12-24
43⁄4
31⁄16
17⁄8
49⁄16
2
12-24
43⁄4
35⁄16
17⁄8
49⁄16
33⁄8
3⁄8-16
73⁄4
43⁄16
27⁄8
51⁄8
AP 200A Plugs
APJ 30, 60 and 100A Plugs
Amps
30
60
60
100
100
200
No.
Poles
2, 3 or 4
2 or 3
4
2 or 3
4
3
a
61⁄2
81⁄2
81⁄2
101⁄8
101⁄8
143⁄4
b
413⁄16
53⁄4
513⁄16
69⁄16
65⁄8
1011⁄16
c
215⁄16
35⁄8
33⁄4
33⁄4
41⁄8
63⁄4
† These dimensions are approximate and vary with cable size.
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
995
1P
APQ Arktite® Circuit Breaking Motor Plugs
NEMA 4 Watertight
APJ Plugs, APR Cable Connector Receptacles
30/60/100 A, 250 VDC/600 VAC, 50**-400 hertz
Application:
APQ motor plugs are used:
ɀ on portable electric equipment
Features:
ɀ Eliminates problem of storing and
protecting a long length of portable cord and
plug on portable device
ɀ Connection to fixed receptacle used as
power source is made with cord sets which
may be hung on wall, out of the way
ɀ Cord sets are made up using an APR
receptacle at one end and an APJ plug at the
other
ɀ Cord sets may be used singly or connected
together to provide longer lengths when
needed
ɀ With spare cord sets on hand, portable
equipment may be kept in service while
normal cord replacement is being made
ɀ Where design of portable equipment
permits, APQ motor plugs can be attached
directly to a sheet metal panel or cabinet
ɀ May be mounted on AR and AJ back boxes
for conduit connection
ɀ See typical installation diagram on page
997
APR Cable connector receptacles with
cable grip, Neoprene bushing, and
protected contacts.
APQ Motor plugs
with square flange, gaskets,
fastening ring, and exposed
contacts.
APJ Plugs
with cable grip, Neoprene bushing,
exposed contacts, and fastening ring.
Standard Materials:
ɀ Motor plugs: mounting plate – Feraloy®,
Iron Alloy; protective sleeve – copper-free
aluminum
ɀ Plug and receptacle exteriors – copper-free
aluminum
ɀ Back boxes – copper-free aluminum
ɀ Insulation – fiberglass-reinforced polyester
ɀ Pressure and solder contacts – brass
ɀ Crimp/solder contacts – leaded red brass
Amps
Style‡
1
30
Standard Finishes:
ɀFeraloy – electrogalvanized and aluminum
acrylic paint
ɀ Copper-free aluminum – natural
ɀ Brass – natural
ɀ Fiberglass-reinforced polyester – natural
(red)
ɀ Leaded red brass – electro-tin-plate
2
1
Options:
Available with these assemblies:
ɀ Special polarity (add suffix S4 to Cat. No.)
See page 968 for details.
60
2
Certifications and
Compliances:
ɀ UL Standards: 514, 1682
ɀ CSA Standard C22.2 No. 182.1
NOTE: For general information on
application, features and grounding, refer to
pages 966 to 969.
1
100
‡ Style 1 – Grounded through shell.
Style 2 – Grounded through extra pole and shell.
* Pressure connectors are standard. Crimp/solder
terminators are optionally available for 2, 3 and 4 pole 30
ampere. 3 and 4-pole 60 and 100 ampere. For details, see
page 969. To specify, add the suffix ‘‘T’’ to the catalog
number. For example: APR3355-T
(Connector)
APJ3375-T (Plug)
2
Description
2-wire, ⎫⎬ *
2-pole ⎭
3-wire, ⎫ *
⎬
3-pole ⎭
4-wire, ⎫ *
⎬
4-pole ⎭
2-wire, ⎫ *
⎬
3-pole ⎭
3-wire, ⎫⎬ *
4-pole ⎭
2-wire, ⎫ *
2-pole ⎬⎭
3-wire, ⎫ *
3-pole ⎬⎭
4-wire, ⎫ *
4-pole ⎬⎭
2-wire, ⎫ *
3-pole ⎬⎭
3-wire, ⎫ *
4-pole ⎬⎭
2-wire, ⎫
⎬
2-pole ⎭
3-wire, ⎫
⎬
3-pole ⎭
4-wire, ⎫
⎬
4-pole ⎭
2-wire, ⎫
⎬
3-pole ⎭
*
*
*
*
3-wire, ⎫ *
⎬
4-pole ⎭
Plug
Cat. #
APJ3275
APJ3375
APJ3475
APJ3385
APJ3485
APJ6275
APJ6375
APJ6475
APJ6385
APJ6485
APJ10277
APJ10377
APJ10477
APJ10387
APJ10487
Cable Dia.
0.60 to 0.88
0.87 to 1.02
0.60 to 0.88
0.87 to 1.02
0.60 to 0.88
0.87 to 1.02
0.60 to 0.88
0.87 to 1.02
Cable
Connector
Receptacle
Cat. #
APR3253
APR3255
APR3353
APR3355
APR3453
APR3455
APR3363
APR3365
0.60 to 0.88
0.87 to 1.02
APR3463
APR3465
0.75 to 0.88
0.87 to 1.37
0.75 to 0.88
0.87 to 1.37
0.75 to 0.88
0.87 to 1.37
0.75 to 0.88
0.87 to 1.37
APR6253
APR6255
APR6353
APT6355
APR6453
APR6455
APR6363
APR6365
0.75 to 0.88
0.87 to 1.37
APR6463
APR6465
1.00 to 1.38
1.37 to 1.50
1.00 to 1.38
1.37 to 1.50
1.00 to 1.38
1.37 to 1.50
1.00 to 1.38
1.37 to 1.50
APR10255
APR10257
APR10355
APR10357
APR10455
APR10457
APR10365
APR10367
1.00 to 1.38
1.37 to 1.50
APR10465
APR10467
** For use on systems less than 60 hertz the receptacles,
plugs and connectors are for disconnect use only.
996
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
Motor Plug
Cat. #
APQ327
APQ337
APQ347
APQ338
APQ348
APQ627
APQ637
APQ647
APQ638
APQ648
APQ1027
APQ1037
APQ1047
APQ1038
APQ1048
Weatherproof
Typical Back Boxes
1P
For APQ Arktite® Circuit Breaking
Motor Plugs
Typical back boxes used with
APQ motor plugs
ARE
AJ
For APQ 30 Amp.
For APQ 60 and 100 Amp.
Hub
Size
1⁄2
3⁄4
1
Hub
Size
1
11⁄4
11⁄2
2
Cat. #
ARE13
ARE23
ARE33
For APQ 60 Amp.
Hub
Size
1
11⁄4
11⁄2
Cat. #
AJ37
AJ47
AJ57
AJ67
Cat. #
ARE36
ARE46
ARE56
Dimensions
Typical installation
APQ Motor Plugs
Amps.
a
30
23⁄4
60
31⁄2
100
31⁄2
(2 & 3-pole)
b
33⁄8
41⁄4
41⁄4
c
35⁄8
47⁄8
61⁄8
s
12-24
5⁄16-18
5⁄16-18
31⁄2
41⁄4
67⁄16
5⁄16-18
100
(4-pole)
US: 1-866-764-5454
For additional back box listings, see pages 990 and 991. For back box
dimensions, see pages 992 and 993.
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Malux Finland Oy, P.O.Box 69, FI-06151 PORVOO, FINLAND
phone: +358 19 5745 700, fax: +358 19 5745 750, e-mail: info@malux.fi, web: www.malux.fi
997