2014 / 2015
Accessories
Husqvarna takes care of you and
your equipment.
A good job becomes better, safer and more enjoyable with the right accessories, protection and clothing.
So when we develop accessories, supplementary tools and clothing, we apply the same thinking as when
we develop our other products: We listen to the most demanding customers and let their views form the
basis for our product design and our choice of materials.
2
2
Arborist Accessories4
Axes5
Chain & Bar Maintenance
Equipment6
Forest Tools & Accessories
7
Lubricants & Fuel Containers
8
Harnesses9
Trimmer & Brushcutter
Accessories
10
Blower Accessories
11
Protective Clothing
12
Safety Helmets, Hearing &
Eye Protection
14
Safety Footwear
15
Automower® Accessories
15
Wheeled Accessories
16
Technical Specifications
Glossary
18
IMPORTANT INFORMATION
Husqvarna conducts continuous product
development and reserves the right to change
designs, specifications and equipment levels
without prior notification. Always read the
instructions carefully before use,as products with
moving parts can be dangerous if used incorrectly.
All images in the catalogue are for illustrational
purposes only. All technical data was current at
the time of printing,however these may change as
a result of further product development. Product
availability, standard features and equipment may
vary from market to market. Optional equipment
may be purchased at an additional cost. Please
check with your Husqvarna dealer for products
recommended and approved in your market.
3
3
ARBORIST ACCESSORIES
TECHNICAL EXTREME - JACKET & TROUSERS
Modern design with slim fit and advanced stretch material for excellent comfort. Strong reinforcement material
is used on critical areas to provide added protection. Two-way ventilation zippers for comfort. Reflective and
high-viz orange fabrics. Trousers feature saw protection and are certified to EN 381-5, EN340 class 1, 20 m/s,
fully compliant with AS/NZS 4453:1997. Jacket and trousers available in S, M, L, XL, XXL sizes. (refer page 12)
PROTECTIVE BOOTS - TECHNICAL
Highly comfortable protective boot made with
composite toe cap which keeps the boot low in
weight. Made of nylon mesh and high quality leather
Sympatex® membrane material that makes the
boot comfortable all day and 100% waterproof. The
Gravity® sole is oil resistant and gives it perfect grip.
The front part of the boot is reinforced with extra
rubber protection. Available in a range of sizes from
3 - 12.
5753547-XX ARBORIST HELMET, TECHNICAL
TECHNICAL GLOVE, SAW PROTECTION
Lightweight and ventilated helmet for professional
arborists, approved for work at heights. Has a unique
harness adjustment with two wheels that centres the
head in the helmet for best balance and stability. Not
approved for forestry work on the ground.
578 09 23-01 Arborist Helmet, Technical
Technical glove with saw protection and goat leather
palm. Meets requirements of EN 381-7, Class 1, 20m/s
and EN 388 mechanical hazards CAT II. Available in
sizes 8-10.
5793810-XX
EYELET - FOR CHAINSAW HANDLE
Technical glove, saw protection (refer page 13)
CHAINSAW HOOK - PETZL
Eyelet with unique design and overload release, made for
arborists who use a standard chainsaw. The loop is
attached to the grip of the saw, which can then be
connected to a strop or directly to the chainsaw hook.
5780771-01
Protective Boots - Technical (refer page 15)
Designed for easy connection to a belt, the hook slips
through the waistbelt slots or along the harness webbing
and stays in place, due to a stabilizing clip.
5808003-01
Chainsaw Hook - Petzl
Eyelet
CHAINSAW STROP
SAW CHAIN H37
5774380-01
5769365-45
5769365-52
To be used together with a chainsaw hook for
connecting the chainsaw to a belt. The elastic design
provides a soft stop in the event of the chainsaw being
dropped at height, minimising impact on the saw and
operator. Measures 0.5m when relaxed and 1.25m fully
stretched out.
Specifically designed for arborist use, the H37 chain is
characterised by lightweight and improved bore cut
abilities. It also has a low kick-back feature for improved
safety. 3/8” Mini pitch, 1.3mm gauge. Suits model
T540XP chainsaw.
Chainsaw Strop
Suits 12” bar - 45 drive links
Suits 14” bar - 52 drive links
METAL CHAINSAW HOOK
The robust auto-lock hook is easily attached to any
harness with removable belt. Designed for easy
connection of chainsaw to a belt.
5774379-01
Metal Chainsaw Hook
TECHLITE ™ BAR - ARBORIST
20 % lighter than a regular laminated bar and with 25 % better rigidity. It’s less susceptible to bending and
has a low weight, which gives a more balanced chainsaw.
5768307-45
5768307-52
4
12” bar 14” bar
3/8” Mini TechLite™ 3/8” Mini TechLite™ Small bar mount 1.3mm
Small bar mount 1.3mm
AXES
AXES - FIBRE-REINFORCED POLYAMID SHAFT
High quality axes with fibre-reinforced polyamid shaft for maximum durability. Designed with the balance
point close to the axe head for perfect balance and weight distribution. The axe head features a non-stick
coating for easy entry into the wood and reduced friction. The soft grip and hooked end of the handle
prevents slipping for secure handling.
5807610-01
5807611-01
5807612-01
5807613-01
5807614-01
Universal Hatchet H900
Universal Axe A1400
Universal Axe A2400
Splitting Axe S1600
Splitting Axe S2800
Head weight
Total weight
Handle length
700g
1000g
1800g
1200g
2300g
900g
1400g
2400g
1600g
2800g
34cm
60cm
70cm
60cm
70cm
Blade geometry
The blade geometry design ensures easy entry in the wood
and best splitting effect due to the hollow grinding of
the blade. Optimal angle geometry for optional splitting
performance (adapted to the application). Hammer function
Shaft protection
Extra wide and durable milled backside of the axe head can
be used effectively for hammering a wedge. The special milled
area preserves wedges and chopping block. For use with
plastic, wood and aluminium wedges only (no steel).
The stainless steel shaft protection with rivec connection, provides
additional protection of the handle for longer life.
Ergonomic handle
Balance point close to the axe head
Modified glass-fiber reinforced PA ensures high impact
power because of the lightweight and robust handle
material - effective impact energy can be concentrated
with the highest impact in the heavy axe head. The
handle features soft components that provide a non-slip
grip, comfortable touch/feel and perfect ergonomics. The
hooked end of the handle prevents the axe from slipping
out of the hand.
The balance point close to the axe head enables high splitting power,
because the maximal impact effect is concentrated in the heavy axe
head. This ensures excellent weight distribution.
AXES - HICKORY SHAFT
High quality Swedish steel blade and hickory shaft, with leather edge guard.
5769264-01
5769262-01
5769268-01
5769267-01 5769266-01
5769267-02
5769266-02 Total Weight
Hatchet
0.5
Limbing Axe
0.85
Small Splitting Axe
0.9
Splitting Axe
1.5
Sledge Axe
2.5
Rep. Handle – Splitting Axe
Repl. Handle - Sledge Axe
Length
37.5cm
65cm
50cm
75cm
80cm
75cm
80cm
5
CHAIN AND BAR MAINTENANCE EQUIPMENT
INTENSIVE-CUT FILES
High quality, round, Husqvarna saw chain files made in
Germany. New upgraded design for up to 20% improved
cutting performance and longer life.
5100957-014.0mm(5/32) - 6 x 2pk
5100957-02
4.0mm(5/32) - 12pk
5772337-01 4.5mm - 6 x 2pk
5100955-01
4.8mm(3/16) - 6 x 2pk
5100955-02
4.8mm(3/16) - 12pk
5100956-01
5.5mm(7/32) - 6 x 2pk
5100956-02
5.5mm(7/32) - 12pk
FL AT FILES
High quality, flat, Husqvarna saw chain files made in
Germany. Single cut for precision filing.
5056981-60
5056981-80
Flat File - 6”
Flat File - 8”
HUSQVARNA FILING KITS
The file kits contain a file handle, combination gauge - or
a file gauge and depth gauge - two round files and one
flat file.
5806875-01 5056981-25 5056981-27 5056981-30 5796536-01 5056981-38 5056981-92 1/4” (H00)
.325” (H21/22/23/25/26/28)
.325 Pixel (H30)
3/8” (H42X/45X/46X/47X/48X/50X)
3/8” LP (H37)
3/8” LP (H35, H36)
.404” (H56S/57/64/64S/65/66)
Patented file locking system that can hold round or flat
files. Shows 25° and 30° angles to ensure correct filing.
5056978-01
Husqvarna - Ctn 20
CLEARING SAW ACCESSORIES
Filing equipment to maintain Clearing Saw blades in optimal
cutting condition.
5056981-20 File Gauge - Clearing Saws
FILING CL AMP (STUMP VISE)
This portable filing clamp digs into any wood surface to
secure your bar and sharpen your chain much easier.
5056652-56
Husqvarna Stump Vise
CHAIN MAINTENANCE
ACCESSORIES
Precision Filing Guide: Professional model filing guide can
be used with 6” - 8” round files as well as flat files.
Stump Vise: For professional and hobby users. Holds
the guide bar firmly when filing.
5776157-20
5776168-30
Precision Filing Guide (FLO020)
Stump Vise (TLO030)
CARRY CASE
COMBINATION FILE GUIDE
Sturdy, stackable design with moulded compartments to
hold accessories. Comes standard with 18”-20” guide bar
cover. Fits up to model 576AT.
5806874-01 Combination File Guide & Depth Gauge 1/4” (H00)
5056981-08Combination File Guide & Depth Gauge
.325” Pixel (H30)
5056981-09Combination File Guide & Depth Gauge
.325” (H21/22/23/25/26/28)
5052435-01
Combination File Guide &
Depth Gauge 3/8” Chisel
H42X/45X/46X/47X/48X/50X)
5759915-01Combination File Guide & Depth Gauge
3/8” Semi Chisel (H51/52/54/58)
5026749-01
The combination file guide helps ensure the correct filing
angle and simplifies the filing process.
FILE GUIDES
Specially designed file guides that give the filing angles, use
together with our round files.
5056981-18
5056981-10
5052437-01
5795588-01
5056981-15
File Gauge 1/4” (H00)
File Gauge .325” (H21/22/23/25/26/28) File Gauge 3/8” LP (H35,H36,H37)
File Gauge 3/8 LP (H38)
File Gauge .404” (H56S/57/64/64S/65/66)
Carry Case (HCCASE)
FOREST BAG
Strong and durable bag with a hard and stable bottom.
Equipped with side pockets, grip handles on sides, carrying
straps and a removable shoulder strap.
5768595-01 Forest Bag
GREY TROLLEY BAG
Strong and durable bag with a hard and stable bottom.
Equipped with wheels, retractable towing handle, side
pockets, grip handles on sides, carrying straps and a
removable shoulder strap.
5768590-01 Grey Trolley Bag
MEASURING TAPE & ACCESSORIES
Simple, lightweight design that can be adjusted without
tools. Marked on both sides of tape.
DEPTH GAUGES
Contact customer service for full spare parts list.
5056981-00 5056981-03 5056981-01 5056981-02 5056973-15 5056973-01 5056973-04 5056973-20 5056971-05 5056972-10 Get maximum performance from your chain when the
depth gauges are filed to the correct height. Each depth
gauge tool has settings for hard or soft wood.
6
FILE HANDLE
.325”
3/8” Low Profile
3/8” Standard
.404”
15M Loggers Tape with release hook
15M Spare Tape
15M Spare Tape - Scissor Hook
20M Loggers Tape with release hook
20M Spare Tape
Release Hook
FOREST TOOLS AND ACCESSORIES
HANDSAWS
Designed with hard chrome plated blade for high corrosion
protection and abrasion resistance. The ergonomic handle
features soft components for a better grip.
967 23 64-01
967 23 65-01
967 23 66-01
Foldable Handsaw 200mm HVA200FO
Fixed Straight Handsaw 300mm HVA300ST
Fixed Curved Handsaw 300mm HVA300CU
TELESCOPIC POLE SHAFT
GUIDE BAR COVERS
Easy adjustable length from 2.5m to 5.0m. Made of fibre-glass so
it’s safe to use around electrical installations. Use with Pruning
Saw (5056945-46) .
Made of tough, impact-resistant plastic for maximum protection.
5024273-01 5024256-03
5024252-03 5024253-03 Telescopic Pole Shaft (2.5m - 5.0m)
Locking Sleeve (31mm - 35mm)
Locking Sleeve (27mm - 31mm)
Wing Nut
PRUNING SAW WITH BARK BL ADE
For use with telescopic shaft. Curved blade with hook at tip
and blade for cutting bark to prevent splitting. For use with
telescopic pole shaft (5024273-01)
5056945-66 Pruning Saw with
Bark Blade 33.3cm
WEDGES
Professional range of high quality felling and splitting wedges.
Choice of tough polyamide, magnesium or steel.
5056947-02 5056947-00* 578456801* 577259201
5769299-01* 5056947-03 5056947-04 5769299-02*
6082010-02 5” Polyamide Wedge - 14cm
5” Magnesium Wedge - 12cm (TLO012)
7” Straight Splitting Wedge, Ctn 12 (TLO013)
7” Curved Splitting Wedge
7” Aluminium Wedge, 500 gm
8” Polyamide Wedge - 20cm
10” Polyamide Wedge - 25cm
10” Aluminium Wedge - 25cm, 800 gm
12” Polyamide Wedge
5018344-09 5018344-11 5018345-04 5370722-01 13-16”
18-22”
24-28”
30-42”
BREAKING BARS
Fully forged with plastic handle, repeat heel and turning
hook.
5056943-01
Breaking Bar – 76cm
5743872-01 Impact Bar (Long) 130cm
COMBI-TOOLS
High quality steel combination spanners with two sizes of
socket on each tool.
5016917-01 5031396-01 5450060-11 13mm x 19mm
13mm x 19mm (Long Shaft)
17mm x 21mm
STARTER CORD
5310038-75 5310038-76 5310038-77 5310038-78 Starter Cord (100m x 3.0mm)
Starter Cord (100m x 3.5mm)
Starter Cord (100m x 4.0mm)
Starter Cord (100m x 4.5mm)
LIFTING HOOKS & TONGS
Lifting hook features comfortable handle and a scale for
measuring tip diameter. Tongs are made of high quality steel
with ergonomic handle.
5743874-01 Lifting Hook
5743875-01 Lifting Tongs small (20cm)
5743876-01 Timber Tongs (30cm)
CHAINSAW MITT *
Leather Chainsaw Mitt for New Zealand Forestry workers.
5045345-01
Chainsaw Mitt - Leather
*only available in NZ
7
LUBRICANTS AND FUEL CONTAINERS
AIR FILTER OILS
Effectively traps particles in the filter, keeping the engine
cleaner and reducing wear.
5555000-81
HD Foam Filter Oil 250ml
5555000-50
Air Filter Spray - Motorex 655
476gm/750ml
5027189-01Air Filter Spray - Motorex 655 (Ctn 12)
476gm/750ml
5047053-01 Air Filter Spray - Motorex 655 (Ctn 4)
476gm/750 ml
MINERAL CHAIN OIL
Mineral chain oil with adhesive agent for high-performance chainsaws. Made
from a premium blend of base stocks and tackifier additives which reduces
high speed throw off. Extends bar, chain and sprocket life.
5793960-01
5793961-01
5793962-01
1 Litre
5 Litre
20 Litre
GREASE AND SHARPENING
PASTE
A range of premium quality greases for bevel gear and drive
shaft lubrication. Sharpening paste aids in sharpening
mower and edger blades.
VEGOIL
Vegetable based chain oil which is biodegradable and
economical. Can be cleaned with common detergents.
5440451-01 5310075-20 5036212-01
5039764-01
1 Litre (Ctn 12)
5 Litre
GREASE GUN
T WO-STROKE OIL (HP)
High quality plastic grease guns for lubricating bar tip
bearing and clutch needle bearings.
Formulated to work well with mixed fuel blends. Produces
lower engine temperature and extends the engine life.
5440158-09 5440158-10 5047002-01
1 Litre dosage (Ctn 12)
4 Litre (Ctn 4)
Holds 6 litres of petrol & 2.5 litres of chain oil. Features
effective overfill protection. Approved in accordance with
UN regulations.
Handles high loads during tough professional usage.
Produces lower engine temperature and extends the engine
life.
Husqvarna SAE10W/30 4-Stroke Engine Oil is a
premium, multi-grade engine oil and has been specially
compounded and approved for use with Husqvarna
Endurance Series engines, and other 4-Stroke, air-cooled
engines. Specification: SAE 10W30 - API SM (Petrol), API
CF-4 (Diesel).
Combican
Replacement Cap - Combican
Non-spill Spout - Petrol
Replacement Oil Spout
Sealing Ring
2 Stroke Mix Chart
• Engines Under 60cc
ML (OIL)
LITRE (PETROL)
50:1
40
2
100
5
200
10
For Husqvarna 2 stroke engines
under 60cc capacity using
Husqvarna Branded Oil
ML (OIL)
LITRE (PETROL)
33:1
FUEL CAN - 5 LITRES
60
2
Husqvarna metal fuel can with pouring spout.
150
5
300
10
For Husqvarna 2 stroke engines
over 60cc capacity using
Husqvarna Branded Oil
5310092-71
5769019-01
5769019-02
5769019-03
5026762-01* 8
5056980-00 5056980-11 5056980-02 5056980-03 5056980-05 0.1 Litre
1 Litre
4 Litre
4 -STROKE OIL (HUSQVARNA
10W/30)
Grease Gun
HUSQVARNA COMBICAN
T WO-STROKE OIL (LS+)
5781803-02
5780370-02 5780371-02 Grease Sachet 40g
Eco.Bevel Gear Grease 100g
10W/30 4-Stroke Oil - 0.08L (Ctn 50)
10W/30 4-Stroke Oil - 1 Litre (Ctn 12)
10W/30 4-Stroke Oil - 4 Litre (Ctn 4)
10W/30 4-Stroke Oil - 20 Litre
5 Litre Fuel Can (Ctn 6)
• Engines Over 60cc
* AUE Only
HARNESSES
BAL ANCE XT ™ HARNESS
The Balance XT ™ Harness features wide, padded, bodyhugging straps that make the harness comfortable to
wear and reduce stress on the upper body and shoulders.
The simple adjustment in the front can be used in two
different positions, ensuring maximum comfort for both
men and women. A wide and padded hip belt helps to
reduce strain on the hips , while the floating pad system
reduces strain on the back. The effective quick release
mechanism makes it easy to release the product and makes
work safer. 5784498-01
Adjustable backplate in
3 positions clockwise.
Adjustable backplate
in 3 positions up and
down.
Harness - Balance™ XT
BAL ANCE X ™ HARNESS
DUO BAL ANCE ™ HARNESS
Easy to adjust for best fit, the Balance X Harness
features a comfortable chest plate and hip belt that
ensures the harness distributes the load evenly across a
large area for added comfort. The floating pad system
reduces the risk of back strain. The harness has a ventilated
back plate and wide shoulder pads, providing even weight
distribution between both shoulders and also between
the hips and shoulders. The shock absorbing hip pad can
be adjusted for grass or forest position and has a travel
connection. The quick release easily removes the product
from the harness.
™
5784497-01 Adjustable belt in front
- two positions.
An ergonomic harness that distributes the load optimally
between shoulders, chest and back. Wide padded
straps and back plate reduce the load on the upper
body. Equipped with shock absorbing hip pad that
has a travelling connection so that the machine can be
manoeuvred easily with minimal impact on the body,
further saving the user’s back.
5372757-01 Harness - Duo Balance™ 55
Harness - Balance X™
BAL ANCE FLEX ™ HARNESS
(FOR POLE PRODUCTS)
To be used with all kinds of pole products. The product is
attached to the harness by open hooks, making it easy to
use and quick to start/stop. The Balance Flex™ Harness
evens the load distribution over both shoulders due
to the padded shoulder straps, which acts as a support
when using the product in different angles and heights.
STANDARD HARNESS
Designed for use with lighter brush cutters and trimmers.
Features adjustable, padded shoulder straps for individual
comfort. Simple and effective quick release on chest
makes it easy to release the product.
5372163-01
Standard Harness
A lifting force is used to help hold and lift the product.
The harness gives good support when using pole
products for different kinds of work, high or low, far
away or close, which results in better ergonomics.
5784499-01
Harness - Balance Flex™
SHOULDER STRAP
Simple shoulder strap for smaller trimmers. Easy to
remove the harness with one hand if needed.
5372162-01
Shoulder Strap
9
TRIMMER AND BRUSHCUTTER ACCESSORIES
HUSQVARNA X-FORCE TRIMMER LINE
Tested under extreme conditions, X-Force resulted in a huge improvement of
56% in wear resistance and a massive 138% increase in working life compared to
previous trimmer line styles. Featuring a robust surface pattern design combined
with a new co-polymer formula for increased performance, Husqvarna X-Force
trimmer line delivers a great cut every time. Husqvarna X-Force trimmer line is
available in a range of diameters and lengths to suit a variety of needs for both
professionals and homeowners alike.
2.0mm - Green
5784327-01
5784328-01
5784329-01
2.4mm - Orange
5784331-01
5784332-01
5784334-01
5784335-01
2.7mm - Yellow
5784337-01
5784338-01
5784339-01
5784340-01
3.0mm - Red
5784341-01
5784342-01
5784343-01
5784344-01
3.3mm - White
5784345-01
5784346-01
2.0mm x 15m
2.0mm x 58m
2.0mm x 130m
Tear Drop
225g Donut
450g Donut
2.4mm x 15m
2.4mm x 50m
2.4mm x 90m
2.4mm x 240m
Tear Drop
225g Donut
450g Donut
Reel
2.7mm x 12m
2.7mm x 43m
2.7mm x 70m
2.7mm x 240m
Tear Drop
225g Donut
450g Donut
Reel
3.0mm x 10m
3.0mm x 32m
3.0mm x 56m
3.0mm x 240m
Tear Drop
225g Donut
450g Donut
Reel
3.3mm x 75m
3.3mm x 240m
450g Donut
Reel
A robust and reliable trimmer head with quick and easy
line loading. Suitable for any Husqvarna trimmer line and
designed for an optimal line locking. The maintenance is
minimised and the low cutting height gives an attractive
and tidy result.
5759898-01
5759901-01
Aluminium Fixed Line Head (1pk)
Aluminium Fixed Line Head
- Bulk Pack (10pk) TRIMMER HEAD - MANUAL
X-Force Pre Cuts
2.7mm - Yellow
5771033-01
3.3mm - White
5771034-01
ALLOY TRIMMER HEAD
2.7mm x 500g pack
3.3mm x 500g pack
Trimmer head with manual cord feed. The cord is fed
manually by the user when pushing the cord feed button
and pulling the cord.
5784474-01
5784476-01
Trimmer Head-S35 (M10)
Trimmer Head-S35 (M12)
TRIMMER HEAD - TRIMMY SII M12
5784478-01
Trimmer Head SII M12 Manual
TRIMMER HEAD – TAP’N GO TM
Tap ‘N Go™ heads feature a semi-automatic cord feed system.
The trimmer line is fed automatically when the head is pushed
into the ground. This means that the user always controls when
the line is fed and the line can be fed while working with the
machine. The machine does not need to be turned off or
released from the harness while feeding is taking place.
9666744-01
5784465-01
5784466-01
5784468-01
5784470-01
Trimmer Head-T25
(3/8” RH, LH, M10) T35
Trimmer Head-T35-X (M10)
Trimmer Head-T35-X (M12)
Trimmer Head-T45-X (M12)
Trimmer Head-T55-X (M12)
TRIMMER HEAD – AUTOMATIC
Cord is fed automatically when it is too short. The cord
length is self-adjusting.
5310092-26
Trimmer Head-Auto 55 (M12) 1”
TRIMMER HEAD – TRICUT
For coarser grass and terrain with stones. Highly visible,
replaceable plastic flails, safe for use around trees and bushes.
5784491-01
5784493-01
5310177-14
5310177-15
10
Tri-Cut (M10)
Tri-Cut (M12)
Plastic Blade Tri-Cut (255mm) - Pkt 6
Plastic Blade-Tri Cut (300mm) - Pkt 6
GRASS BL ADE
SUPPORT CUPS
For dense, coarse grass, but not for woody growth. Grass falls
onto the blade for neat rows. Four to eight teeth.
Prevents the blade from digging into ground. Two versions.
One rotates with the blade and the other runs on bearings
for extended life.
5784442-01 5784440-01 5784439-01 5784437-01 8 Tooth, 255mm Ø, 20mm Arbor
8 Tooth, 255mm Ø, 1” Arbor
4 Tooth, 255mm Ø, 20mm Arbor
4 Tooth, 255mm Ø, 1” Arbor
MULTI BL ADE
For dense, coarse grass, but not for woody growth.
5784450-01 5784449-01
5784448-01 5784447-01 5784446-01 5784445-01 3 Tooth, 255mm Ø, 20mm Arbor
3 Tooth, 255mm Ø, 1” Arbor
4 Tooth, 275mm Ø, 20mm Arbor
4 Tooth, 275mm Ø, 1” Arbor
3 Tooth, 300mm Ø, 20mm Arbor
3 Tooth, 300mm Ø, 1” Arbor
SAW BL ADE - MAXI
The original Husqvarna Saw Blade. Robust and reliable.
5089015-01 5089024-01 5784431-01 5022684-01 26 Tooth, 200mm Ø, 20mm Arbor
22 Tooth, 225mm Ø, 20mm Arbor
26 Tooth, 200mm Ø, 1” Arbor
22 Tooth, 255mm Ø, 20mm Arbor
5038901-01 5038901-02 5039018-02 5021570-02 Support Cup (M10), black
Support Cup (M12)
Fixed Support Cup 20mm, grey
Support Cup w/ Bearing (M12)
J-HANDLE & RJ KIT
Converts loop handled units to blade use.
Kit includes;
•Grass cutting blade
•Flange washer
•Support cup
•Combi blade guard (suitable for line & blade)
•“P” handle
•Shoulder strap
•Combi tool
•Saw blade guard kit (200mm)
5370485-01 9527156-16 5442496-01
J-Handle Kit
J-Handle Kit - 125L
J-Handle Kit - Suits 335LS
SHREDDER BLADE KIT
5448429-01 Shredder Blade Kit (suits 345FR)
SAW BLADE - SCARLETT
Superior cutting performance, low vibration saw blade.
5784425-01 5372776-01 5784428-01 5784427-01 22 Tooth, 200mm Ø, 1” Arbor
22 Tooth, 200mm Ø, 20mm Arbor
24 Tooth, 225mm Ø, 20mm Arbor
24 Tooth, 225mm Ø, 1” Arbor
BLOWER ACCESSORIES
125BVX HANDHELD BLOWER
9527119-18 Gutter Cleaning Kit (3m tube length)
11
PROTECTIVE CLOTHING
TECHNICAL EXTREME JACKET
TECHNICAL JACKET
CL ASSIC JACKET
5781663-46
5850615-50
5781663-54
5781663-58
5781663-62
5781660-46
5781660-50
5781660-54
5781660-58
5781660-62
5781653-46
5781653-50
5781653-54
5781653-58
5781653-62
Modern design with slim fit and advanced
stretch material for excellent comfort. Strong
reinforcement material is used on critical areas,
including the unique pre-bent arms, to provide
added protection. Two-way ventilation zippers
under the arms. Reflective fabric on the arms,
reflective band.
Small (46”-48”)
Medium (50”-52”)
Large (54”-56”)
X-Large (58”-60”)
XX-Large (62”-64’)
TECHNICAL EXTREME TROUSERS
Fitted jacket with four-way stretch material
for ease of movement. Reinforced material for
high durability, two-way ventilation zippers
for additional comfort. The reflective fabric on
the arms, a reflective band and high-viz orange
fabric at the top, provides increased visibility.
Small (46”-48”)
Medium (50”-52”)
Large (54”-56”)
X-Large (58”-60”)
XX-Large (62”-64’)
Boasts a clean and modern design with quality
in the details. The high-viz orange fabric at the
top and large reflective logo prints, provides
increased visibility. The jacket features buttons
at the end of the arms to provide a tight and
secure fit, a chest pocket and two side pockets.
Small (46”-48”)
Medium (50”-52”)
Large (54”-56”)
X-Large (58”-60”)
XX-Large (62”-64’)
Trousers with the same slim fit, stretch, and
reinforced material as the jacket, plus chainsaw
protection. Unique pre-bent knees and
ventilation zippers at the backs of the legs. Velcro
adjustments around the waist ensures a perfect fit
for both men and women.
Trousers with the same tight fit, stretch material,
reinforcements, ventilation and reflective
material as the jacket, plus chainsaw protection.
Unique pre-bent knees and ventilation zippers at
the backs of the legs. The extended back design
provides added coverage.
TECHNICAL TROUSERS
CL ASSIC TROUSERS
5781665-46
5781665-50
5781665-54
5781665-58
5781665-62
5781661-46
5781661-50
5781661-54
5781661-58
5781661-62
5781654-46
5781654-50
5781654-54
5781654-58
5781654-62
Small (46”-48”)
Medium (50”-52”)
Large (54”-56”)
X-Large (58”-60”)
XX-Large (62”-64’)
Small (46”-48”)
Medium (50”-52”)
Large (54”-56”)
X-Large (58”-60”)
XX-Large (62”-64’)
Stay sharp. Add safety.
Clean, modern design trousers with chainsaw
protection. The classic trousers feature a
comfortable, elastic waist design with front
pockets, one back pocket and a convenient
ventilation zipper at the back of the legs for user
comfort.
Small (46”-48”)
Medium (50”-52”)
Large (54”-56”)
X-Large (58”-60”)
XX-Large (62”-64’)
IT Y
HIGH DURABILRT
FO
M
AND CO
Safety, comfort, modern styling and technology are combined to
produce clothes that help you work conveniently and efficiently.
Our jackets and trousers are lightweight and flexible which allows
you to work quickly and unobstructed. All garments have been
rigorously tested to provide good protection.
Ventilation zipper under the arms.
12
Protective material that comprises of
fewer layers making it lighter but still
with the same protection.
Reinforced with reflective material
on the arms.
Pre-bent arms for movement and
comfort.
GLOVES - CL ASSIC LIGHT
A slim fit and comfortable glove made with a goat
leather palm with jersey fabric on the back. Goat leather
has a good protection against moisture since it contains
natural fat and is therefore suitable for demanding jobs.
5793800-06 5793800-08
5793800-09 5793800-10 Size 6
Size 8
Size 9
Size 10
FUNCTIONAL GLOVES
WITH SAW PROTECTION
TECHNICAL GLOVES
WITH SAW PROTECTION
A comfortable saw protection glove made with a goat
leather double palm with foam laminated spandex on
the back and with nylon neoprene knuckles. Goat leather
has a good protection against moisture since it contains
natural fat and is therefore suitable for demanding jobs.
Knitted wrist makes it easy to put on and gives a soft
comfort.
A Technical glove with chainsaw protection 20m/s. Goat
leather palm with interlock jersey and grey foam and
laminated spandex fabric on back. Made with comfortable
seams that follow the hand shape and with double
thumb stitching. Meets the requirements of EN 381-7,
Class 1, 20 m/s and EN 388 mechanical hazards CAT II.
5793802-07
5793802-08 5793802-09 5793802-10 5793802-12 5793810-08 5793810-09 5793810-10 Size 7
Size 8
Size 9
Size 10
Size 12
Size 8
Size 9
Size 10
CL ASSIC GLOVES
LIFEST YLE CHAPS
FIRE RETARDANT CHAPS
A one size durable glove made with a goat leather palm
and spandex fabric on the back. Goat leather offers good
protection against moisture since it contains natural fat
and is therefore suitable for demanding jobs. Rubberised
cuff with cotton binding for a perfect fit around the
wrist.
Chainsaw chaps for the occasional chainsaw user. They
feature heavy duty nylon outer fabric, with adjustable
clips on the upper leg and zip closure on the lower leg
to ensure a secure fit. Certified to AS/NZS 4453-3:1997.
Suitable for Government, Utility and Emergency Services
chainsaw users, Husqvarna’s Fire-retardant Chainsaw
Chaps offer increased protection from thermal and
electrical hazards, and comply with Australian and New
Zealand occupational health standards.
5748419-03
Small
5748419-02
Medium
5748419-01
Large
5793799-10 Size 10
HUSQVARNA PRO CHAPS
New style Husqvarna Pro Chainsaw Chaps feature a
lightweight, breathable poly-cotton outer shell material
with fully adjustable clip style leg straps and a velcroattached fabric layer on the rear lower leg to offer debris
and snagging protection. Fully certified to AS/NZS
4453:1997
5769241-46
5769241-50
5769241-54
5292841-01
5292842-01
5292843-01
Length
Small
Medium
Large
(waist to bottom of chap)
90cm
95cm
100cm
REPL ACEMENT BUCKLES FOR
PRO CHAPS
5806080-01
5806081-01
5806078-01
5806079-01
20mm Male
20mm Female
50mm Male
50mm Female
BRACES
Extra wide, adjustable length braces.
5056185-00 5056185-10 Braces with Metallic Clips
Replacement braces for Technical
Extreme Trousers. Also suits
Technical and Classic Trouser range.
Small
Medium
Large
13
SAFETY HELMETS, HEARING AND EYE PROTECTION
ABORIST HELMET KIT
PREMIUM EARMUFF
Lightweight and ventilated helmet for professional
arborists, approved for work at heights. Unique harness
adjustment with two wheels that centers the head in the
helmet for best balance and stability on the head. Only
for work at height - Not approved for forestry work on
the ground!
Design allows 20% adjustment of pressure. Lightweight,
flexible padded headband. Meets requirements of EN 352-1.
5780923-01 Aborist Helmet Kit
(incl. Helmet, Earmuff, Mesh Visor)
FOREST HELMET KIT
Polycarbonate helmet, made in Australia, and supplied
with hearing protection, sun peak and neck guard.
Certified to AS/NZS 1801:1997,Type 2
5792440-01 5802544-01 5792441-01 Helmet Assembly
(Helmet, Earmuff & Mesh Visor)
Helmet Assembly (6pk)
Polycarbonate Helmet only
EARMUFF AND HELMET SPARES
5746135-01
5056653-21
5056653-19
5056653-43
5056653-28
5056653-26
5056653-91
5056653-31
5755576-02
5792442-01
5056653-06
5781798-01
5755573-01
5792443-01
5056653-95
5854834-01
Ultra Vision Visor (NEW)
Mesh Visor-Aluminium
Mesh Visor-Nylon
Visor-Perspex
Visor Holder Assembly - Helmet
Hygiene Kit - Earmuff
Hygiene Kit - FM Earmuff (old model)
Sweatpad - Earmuff
Helmet Harness - Plastic Type 1 Helmet
6 point Terylene Harness for Type 2 Helmet
Neck Protector - Helmet
Sun Peak For Helmet Complete
Sweat Band - Type 1 Helmet
Replacement Sweat Band - Type 2 Helmet
Chin Strap - 11154 (Type 1 Helmet)
Chin Strap (Type 2 Helmet)
5056653-04 5056653-25 5790356-01 PREMIUM EARMUFF WITH
PERSPEX OR MESH VISOR
Protection for grass clearing and other tasks. Cover between
visor and headband which prevents grass, chips and rain
from entering from above. Complete as shown. Can also be
fitted with a sun peak. Meets requirements of EN 352-1, EN
166 and EN 1731.
5056653-48 5056653-58 5056653-80
5056653-42 5056653-81
Premium Earmuff w. Plexi Visor
Premium Earmuff w. Mesh Visor
Visor Holder (Premium Earmuff)
Visor Clips-L+R (Premium Earmuff)
Protection Cap (Premium Earmuff)
FM RADIO EARMUFF WITH AUX
JACK
NEW hearing protection with FM radio. The headband
design centralises the pressure on the headband, reducing the
pressure on the ears. It has improved attenuation and sound
quality. The ear muffs are individually designed for the left
and right ear, meaning that they follow the shape of the head,
giving a perfect fit for all users. Features Audio input 3.5mm
(AUX) for mp3 or communication radio. Noise reduction
- SNR - 27dB(A). Meets requirements of EN352-3:2002,
EN352-6:2002 and EN352-8:2008.
5782749-01 5784023-01
FM Radio Earmuff
Hygiene Kit for FM Radio Earmuff
EARPLUGS
Made with extra-soft, low-pressure foam for comfort and fit.
Certified to: ANSI S3.19-1974.
GARDEN EARMUFF
5743162-01
Extra wide headband for secure, comfortable fit and less
pressure on the head. The protectors are made of impactresistant ABS plastic. Meets requirements of EN 352-1 and
EN 166. Weight 218g.
‘X’ SERIES PROTECTIVE GL ASSES
5101995-01 5056990-12 Garden Earmuff
Garden Earmuff (Ctn 10)
GARDEN EARMUFF WITH
PERSPEX OR MESH VISOR
Garden earmuff complete with visor holder and perspex or
mesh visor. Meets requirements of EN 352-1 and EN 166.
5056653-60 5056653-61 Garden Earmuff w. Perspex Visor
Garden Earmuff w. Mesh Visor
Earplugs (Box Of 200 Sets)
Protective glasses with scratch resistant lenses. Frames can
be extended and lenses can be angled. Available in Clear,
Grey tint, and Yellow tint. Meets requirements of EN 166,
ANSI Z87+
5449637-01 5449637-03 5449637-02 Protective Glasses - Clear ‘X’
Protective Glasses - Sun ‘X’
Protective Glasses - Yellow ‘X’
PRO SAFET Y GOGGLES WITH
ANTI-FOG LENS
Developed for people who wear eyeglasses. Featuring nonscratch anti-fog lenses and soft inside for greater comfort.
Meets requirements of EN 166.
5449639-01 14
Premium Earmuff w. Headband - old
Premium Earmuff (Pair) Helmet Type 1
Premium Earmuff
w. adaptor for Helmet Type 2
Pro Safety Goggles (Anti-Fog Lens)
SAFETY FOOTWEAR
PROTECTIVE BOOTS - TECHNICAL
Highly comfortable protective boot made with composite
toe cap which keeps the boot low in weight. Made of nylon
mesh and high quality leather Sympatex® membrane
material that makes the boot comfortable all day and 100%
waterproof.
The Gravity® sole is oil resistant and gives it perfect grip.
These boots are suitable for forest and garden work as well
as leisure, in all weather conditions. The front part of the
boot is reinforced with extra rubber protection. Certified
to EN ISO 20345. Weight 1.5kg pair.
EU size
5753547-36
Size 3
36
5753547-37
Size 4 37
5753547-38
Size 5
38
5753547-39
Size 5 1/2
39
5753547-40
Size 6 1/2
40
5753547-41
Size 7 1/2
41
5753547-42
Size 8 42
5753547-43
Size 9
43
5753547-44
Size 9 1/2
44
5753547-45
Size 10 1/2
45
5753547-46
Size 11
46
5753547-47
Size 12
47
PROTECTIVE BOOTSFUNCTIONAL 24
Weight 2.5 kg/pair. With reinforced toe-cap and approved
saw protection. Roomy fit. Non-slip sole, prepared for
studs. Ankle protection.
Ridge on the heel makes it easier to remove boot. Meets
requirements of EN 345 SB E, EN 381-3 class 2, 24 m/s.
EU size
5739558-37 5739558-38 5739558-39 5739558-40 5739558-41 5739558-42 5739558-43 5739558-44 5739558-45 5739558-46 5739558-47 Size 4 Size 5 Size 5 1/2 Size 6 1/2 Size 7 1/2 Size 8 Size 9 Size 9 1/2 Size 10 1/2 Size 11 Size 12 37
38
39
40
41
42
43
44
45
46
47
BOOT STUDS
Studs, including stud key, to suit protective boots
Functional 24.
5056543-61
Boot Studs, including studs key
AUTOMOWER® ACCESSORIES
SIGNAL BOOSTER
Increases the signal strength to a sufficient
level in long loop wire installations.
5224258-01
Signal Booster
WHEEL BRUSH KIT
Keeps the driving wheels clean to maintain
good traction. For Automower®.
5051327-01
Wheel Brush Kit
SOFT CARRY BAG
A special carry bag, making it easy to
transport the Automower® between
lawns.
5056999-91
Soft Carry Bag
AUTOMOWER ® HOUSE
Protects the charging station and
Automower® from the exposure of sun
and rain.
5048214-01
Automower® House
15
WHEELED ACCESSORIES
SWEEPER /COLLEC TOR
AERATOR 5815381-01
5400000-73
9689992-36 For Riders. A spacious, handy collector that is easily
emptied from the driver’s seat. Adjustable height setting.
Working width 42”/107cm.
Sweeper/Collector
FLAIL MOWER
Robust, reliable flail mower for rough areas with overgrown grass and low brushwood. Hard-wearing mitre
gear for maximum product life. Suits models
R422TSAWD, P524.
9667965-01
Productive and robust flail mower for rough areas with
overgrown grass and brushwood. Shaft driven with
bevel gear. Requires counter weight. Suits model P525D.
Flail mower - P525D
Tow-behind spreaders with various spreading widths
(Spreader 30 =1.8M - 3.0 M ; Spreader 75 = 3.0m 3.7M ) and various weight capacities.
954 12 00-46
967 02 72-01
Spreader 30
Spreader 75
Special order via indent only.
Rotating brush attachment for professional Riders.
Adjustable support wheels. Suits models R422TSAWD,
P524.
COUNTER WEIGHT
9667963-01
9667549-01
BRUSH Brush - Working width 114-120cm.
BRUSH
Rotating brush attachment for model P525D. Shaft driven
with bevel gear and chain drive. Two rear solid support
wheels for ground following. Requires hydraulic kit.
9667544-01
HYDRAULIC KIT
ROAD KIT
9667545-01
5853187-01
Kit necessary for adaption of front-mounted
attachments with hydraulic function.
16
Aerator - 36” Width
Aerator - 48” Width
SPRE ADER
Rear counterweight, must be used when operating
front-mounted attachments. Total weight 62kg. Suits
model P525D.
Counter weight
Flail Mower - Cutting width 100cm.
FL AIL MOWER
9670243-01
Special order via indent only.
Efficient tow-behind aerator. Productivity 2.9 acres/hr.
Weight units sold separately. Suits models R422TSAWD.
Hydraulic Kit - P525D
Brush - P525D
UTILIT Y BUCKET
Practical utility bucket in welded high-tensile steel.
Hydraulic adjustment of angling and emptying.
Requires hydraulic kit and counter weight.
9659974-01
Utility Bucket - P525D
Complete road kit designed for safe transport on public roads to and from work sites. Kit includes control box, rotating
beacon light, position and touring lights (front and rear) and number plate light kit.
Road Kit - P525D
SE AT COVER
Water resistant fabric, cushioned for extra comfort, with rear storage pockets for
tools and gear. Protects the seat against weather and UV damage. Suits all
homeowner/landowner ride-on mowers.
5313082-28
Seat cover
COVER
Full size covers made in water resistant nylon.
5056308-70
5049813-82
5056308-82
Rider Cover (S) - Suits 100 series
Rider Cover (L) - Suits 400 series
Tractor Cover (L) - Suits YT/GT/CT
TRACTOR SCOOP
TRAC TOR BL ADE
DEFLEC TOR
5762173-01
5762174-01
9607100-40
9607100-42
Convenient scoop recommended for transporting
small / lightweight items, such as bark or leaves.
Tractor Scoop - YT/GT models
COLLEC TORS
A range of spacious collectors available, with two or
three bin compartments. Capacity - 210 L or 315 L.
Ask instore for fit up options and ordering details.
Efficient 48” blade recommended for clearing gravel
and debris from paths.
Tractor Blade - GT models only.
TRAILER
Rugged, steel, dump trailer with fold down tailgate.
Capacity: 227kg. Size: 177.8 x 76.2 x 73.6 cm
Made in the USA
9670271-01
Trailer
Converts CTH2138R, CTH2642TRE
CTH2642TR to rear ejection with a deflector.
and
Deflector - CTH2642TRE
Deflector - CTH2138R/CTH2642TR
BIOCLIP ® / MULCHING KIT
Converts standard cutting deck to BioClip® (mulching). Suits selected lawn tractors and zero turns.
Ask instore for fit up options and ordering details.
BAT TERY CHARGER BC0. 8
BAT TERY STATUS INDICATOR
For all 12V lead-acid batteries from 1.2 - 32Ah. Suitable for maintenance charging up
to 100Ah. Fully automatic and maximises battery life and performance. No sparks,
short-circuit proof and reverse-polarity protected for untroubled usage.
A practical quick connector for those with batteries that are difficult to access or are
hidden. The eyelet terminals are fitted to the battery, giving effortless connection
without the need of actually reaching the battery. Fits Husqvarna Battery charger XS
800 (new connection) and BC 0.8
5794501-02 Battery Charger
5794521-01 Battery status indicator
17
TECHNICAL SPECIFICATIONS GLOSSARY
HUSQVARNA – SAW CHAIN
PITCH GAUGE
HUSQVARNA
MODEL
CHAIN
NO.
PART NO.
COMMERCIAL
REF. NO.
SIZE
H00-58DL
10"
H00-64DL
12"
5033054-01
H00-100R
100ft
5018406-64
H30-64DL
15"
5018406-66
H30-66DL
16"
H30-72DL
18"
H30-100R
100ft
5018440-58
1/4"
.325"
Pixel
.050"
.050"
5018440-64
5018406-72
H00
H30X
5033058-01
.050"
5033058-25
H30-25R
25ft
5033067-01
H22-100R
100ft
H22-25R
25ft
H23-100R
100ft
H23-25R
25ft
5018404-64
H25-64DL
15"
5018404-66
H25-66DL
16"
5018404-72
H25-72DL
18"
H25-80DL
20"
H25-100R
100ft
5033067-25
5033091-01
5033091-25
.058"
.325"
5018404-80
H25X
5033055-25
H25-25R
25ft
5033057-01
H21-100R
100ft
H21-25R
25ft
H21X
5033003-62
H28-62DL
16"
5033003-68
H28-68DL
18"
H28-100R
100ft
H28-25R
25ft
H26-100R
100ft
H26-25R
25ft
H38-100R
100ft
H38-25R
25ft
5018470-52
H35-52DL
14"
5018470-56
H35-56DL
16"
H35-100R
100ft
H35-25R
25ft
H36-100R
100ft
H36-25R
25ft
5033003-22
H28X
5033003-25
5033073-01
5033073-25
.043"
H23X
5033055-01
5033057-25
.063"
H22X
5818079-01
5818079-25
5033069-01
H26X
H38
H35X
5033069-25
5769365-01
3/8" LP
.050"
5033068-25
5769365-45
H37-45DL
12"
5769365-52
H37-52DL
14"
H37-56DL
16"
5769365-01
H37-100R
100ft
5769365-25
H37-25R
25ft
5769365-56
18
H36
H37
CUTTER
TYPE
OTHER CHAIN TYPES
FILE
SIZE
OREGON
WINDSOR
CARLTON
STIHL
MicroChisel®
25AP
50K
E1MC-BL
13RM
5/32"
MicroChisel®
95VPX
50JSG
K1NK-BL
–
3/16"
MicroChisel ®
20BPX
50JG
K1C-BL
23RMC
3/16"
Chisel
20LPX
50JLG
K1L-BL
23RS
3/16"
MicroChisel ®
21BPX
58JG
K2C-BL
25RMC
3/16"
Chisel
21LPX
58JLG
K2L-BL
25RS
3/16"
MicroChisel®
22BPX
63JG
K3C-BL
26RMC
3/16"
Chisel
22LPX
63JLG
K3L-BL
26RS
3/16"
Chamfer
Chisel™
90SG
43RG
N4C-BL
61PMM3
4.5mm
Semi Chisel
91VXL
50R
N1C
63PM
5/32"
Chamfer
Chisel™
91VG
50RG
N1C-BL
63PMC3
5/32"
Chamfer
Chisel™
91PX
50RG
N1C-BL
63PMC3
5/32"
PITCH GAUGE
HUSQVARNA
MODEL
CHAIN
NO.
PART NO.
5033033-25
H51-25R
25ft
100ft
H47-100R
100ft
H47-25R
25ft
H46-100R
100ft
H46-25R
25ft
5440788-68
H54-68DL
18"
5440788-72
H54-72DL
20"
5440788-76
H54-76DL
22"
H54-84DL
24"
5033050-01
H54-100R
100ft
5033050-25
H54-25R
25ft
5033081-01
H48-100R
100ft
5033079-01
5033079-25
5033078-01
5033078-25
5440788-84
3/8"
0.58"
5033081-25
H51
H47X
H46X
H54
H48X
H48-25R
25ft
5018414-72
H42-72DL
20"
5018414-76
H42-76DL
22"
5018414-84
H42-84DL
24"
5018414-92
H42X
H42-92DL
28"
5033060-01
H42-100R
100ft
5033060-25
H42-25R
25ft
H52-100R
100ft
H50-100R
100ft
H50-25R
25ft
5033052-22
5019824-01
5019824-25
0.63"
5033088-01
H52
H50X
H45X
5228745-72
5228745-01
H58
5228745-25
.058"
5440760-01
5440760-25
5033064-01
5033064-25
5033065-01
.404"
.063"
SIZE
H51-100R
5033033-22
.050"
COMMERCIAL
REF. NO.
H56S
H64
100ft
20"
H58-100R
100ft
H58-25R
25ft
H56S-100R
100ft
H56S-25R
25ft
H64-100R
100ft
H64-25R
25ft
H66-100R
100ft
5018434-95
H57-95DL
32"
5018434-65
H57-65DL
20"
5018434-76
H57-76DL
24"
5100941-01
H57-84DL
28"
H57-104DL
36"
5018434-04
H66
H45-100R
H58-72DL
H57
5100943-01
H57-122DL
42"
5033077-01
H57-100R
100ft
5033077-25
H57-25R
25ft
5449230-01
H64S-100R
100ft
H64S-25R
25ft
H65-100R
100ft
5449230-25
5033066-01
H64S
H65
CUTTER
TYPE
OTHER CHAIN TYPES
FILE
SIZE
OREGON
WINDSOR
CARLTON
STIHL
72DP
50AG
A1EP-BL
33RM1
7/32"
72LGX
50APL
A1LM
33RS
7/32"
72LPX
50APLG
A1LM-BL
33RS1
7/32"
Semi Chisel
73DP
58AG
A2EP-BL
35RM1
7/32"
Chisel
73LGX
58APL
A2LM
35RS
7/32"
Semi ChiselRipping
73RD
–
A2EP-RP
–
7/32"
Chisel
75LGX
63APL
A3LM
36RS
7/32"
75LPX
63APLG
A3LM-BL
36RS1
7/32"
Semi Chisel
75DP
63AG
A3EP-BL
36RM1
7/32"
Chisel-Skip
58J
–
B2LM-SK
–
7/32"
MicroChisel ®
27
63B
B3RM35
46RM
7/32"
Semi Chisel
Chisel
59AC
7/32"
Chisel
59L
63BL
B3EP
46RS
7/32"
MicroChisel® - Skip
27A
–
–
46RMF
7/32"
Semi Chisel Ripping
27R
63BR
B3RM10
46RCX
7/32"
19
Chain Reels – Drive Link Count
1/4”
.325”
3/8” LP
3/8”
.404”
Drive Links - 25’ Reel
CHAIN PITCH
600
464
412
412
372
Drive Links - 100’ Reel
2392
1848
1640
1640
1484
Husqvarna Solid Guide Bars
PITCH
GAUGE
HUSQVARNA
PART NO.
BAR LENGTH
INCHES
CM
DRIVE LINKS
CHAIN
TYPE
OREGON
EQUIVALENT
Solid Bars with Replaceable Nose
.325"
.058"
.050"
.058"
3/8"
.063"
.404"
.063"
5024400-72
18"
45cm
72
H21,25
188RNBK095
6080000-09
20"
50cm
78
H21,25
208RNBK095
6080000-46
20"
50cm
72
H46,47,51
200RNDD009
6080000-17
16"
40cm
60
H42,48,54
168RNDK095
5019577-68
18"
45cm
68
H42,48,54
188RNDK095
5019577-72
20"
50cm
72
H42,48,54
208RNDK095
5019569-60
16"
40cm
60
H42,48,54
168RNDD009
5019569-68
18"
45cm
68
H42,48,54
188RNDD009
5019569-72
20"
50cm
72
H42,48,54
208RNDD009
5019569-76
22"
55cm
76
H42,48,54
228RNDD009
5019569-84
24"
60cm
84
H42,48,54
248RNDD009
5019569-92
28"
70cm
92
H42,48,54
288RNDD009
6080000-54
32"
81cm
105
H42,48,54
328RNDD009
203RNDD009
5024396-72
20"
50cm
72
H45,50,58
6080000-55
32"
81cm
105
H45,50,58
323RNDD009
5024396-15
36"
90cm
115
H45,50,58
363RNDD009
5020773-65
20"
50cm
65
H57,64
203RNFD009
5020773-76
24"
60cm
76
H57,64
243RNFD009
5020773-84
28"
70cm
84
H57,64
283RNFD009
6080000-62
32"
81cm
95
H57,64
323RNFD009
6080000-63
36"
90cm
104
H57,64
363RNFD009
5020773-22
42"
107cm
122
H57,64
423RNFD009
Laser Tip Solid Nose Bars
.058"
.063"
5019580-68
18"
45cm
68
H42,48,54
188ATMD009
5019580-72
20"
50cm
72
H42,48,54
208ATMD009
5019580-84
24"
60cm
84
H42,48,54
248ATMD009
5019580-92
28"
70cm
92
H42,48,54
288ATMD009
5015896-01
28"
70cm
84
H45,50,58
283ATMD009
Husqvarna Chain Parts
TIE STRAPS - PKT 25
PART NO.
HUSQVARNA CHAIN
TYPE
OREGON
CHAIN TYPE
5040662-01
H00
5040670-01
H00
5018478-05
H35,36,37
5018481-05
H35,36,37
91
5018477-07
H30
5018480-08
H30
95
H42,46,47,48,51,52,54
5018481-04
H42,46,47,48,51,52,54
H45,50,58
5040670-03
H45,50,58
H21,22,23,25
5018480-05
H21,22,23,25
H26,28
5040670-04
H26,28
H56S,57,58S,64,64S,65,66
5018482-02
H56S,57,58S,64,64S,65,66
5018478-04
5018477-03
5018479-02
20
PRESET TIE STRAPS - PKT 25
PART NO.
HUSQVARNA CHAIN
TYPE
25
72/73
75
20/21
22
26/27/57/58/59
Husqvarna Laminated Bars
PITCH
GAUGE
HUSQVARNA
PART NO.
BAR LENGTH
INCHES
CM
DRIVE
LINKS
CHAIN
TYPE
OREGON
EQUIVALENT
32
H38
–
Special Bars (suit PS250)
3/8LP
.043"
5024052-01
6"
15cm
5758422-58
10”
25cm
58
H00
–
5758422-64
12"
30cm
64
H00
–
5019595-45
12"
30cm
45
H35,36
124MLEA041
5019592-40
10”
25cm
40
H35,36
100SDEA095
5019592-45
12"
30cm
45
H35,36
120SDEA095
5019592-52
14"
35cm
52
H35,36
140SDEA095
5019592-56
16"
40cm
56
H35,36
160SDEA095
5019596-45
12"
30cm
45
H35,36
120SDET095
5019596-52
14"
35cm
52
H35,36
140SDET095
5019596-56
16"
40cm
56
H35,36
160SDET095
5768307-45
12"
30cm
45
H35,37
120SDEA095
5768307-52
14"
35cm
52
H35,37
140SDEA095
5768307-56
16"
40cm
56
H35,37
160SDEA095
138SLBK095
Special Bars (suit 327PT5S)
1/4"
.050"
Narrow Kerf Laminated Sprocket Nose Bars
3/8LP
.050"
Consumer Sprocket Nose Bars
3/8LP
.050"
Consumer Sprocket Nose Side-tensioning Bars
3/8LP
.050"
TechLite™ Laminated Sprocket Nose Bars
3/8LP
.050"
Pro-Laminated Sprocket Nose Bars
.325"
.058"
3/8"
.058"
5089121-56
13"
33cm
56
H21,25
5089121-64
15"
38cm
64
H21,25
158SLBK095
5089121-66
16"
40cm
66
H21,25
168SLGK095
5089121-72
18"
45cm
72
H21,25
188SLGK095
5089121-80
20"
50cm
80
H21,25
208SLGK095
5089141-56
15"
38cm
56
H42,48,54
158SLHK095
5089141-60
16"
40cm
60
H21,25
168SLHK095
5089141-68
18"
45cm
68
H42,48,54
188SLHK095
5101535-72
20"
50cm
72
H42,48,54
208SLHK095
5089131-56
15"
38cm
56
H42,48,54
158SLHD009
5089131-60
16"
40cm
60
H21,25
168SLHD009
5089131-68
18"
45cm
68
H42,48,54
188SLHD009
5442855-72
20"
50cm
72
H42,48,54
208SLHD009
130MPBK095
Narrow Kerf Pro-Laminated Sprocket Nose Bars
.325"
.050"
5089261-56
13"
33cm
56
H30
5089261-64
15"
38cm
64
H30
150MPBK095
5089261-66
16"
40cm
66
H30
160MPBK095
5089261-72
18"
45cm
72
H30
180MPBK095
5089261-80
20"
50cm
80
H30
200MPBK095
Guide Bar Spares
PART NO.
DESCRIPTION
RSN Guide Bars – Replaceable Nose
PART NO.
DESCRIPTION
Laminated Guide Bars – Sprocket Noses
5019575-01
3/8-11T
5018510-05
.325 .050 (10T)
5048897-01
.325"-12T
5018510-01
.325 .058 (10T)
5019588-01
.404"-10T
5019594-01
.325 .058 (12T)
–
–
5019572-01
.325 .063 (10T)
–
–
5018510-02
3/8 .058 (10T)
–
–
5019574-01
3/8 .058 (11T)
21
325P5X / 327P5X
327PT5S
321 Electric
T435 / 334T
338XPT
T540XP
236 / 236e
240e / 240e Trio
435 e
440e / 445e / 445e-Trio
450e
346XP / 346XP-Trio / 550XP-Trio
550XP
357XP / 455R / 455R-AT
555-AT
460
562XP / 556-AT
365 / 372XP
570 / 575XP / 576XP
570-AT / 576XP-AT
390XP / 395XP
3120XP
Bar & Chain Fit-up Guide
MINI BAR
MOUNT
(A041 / A095)
SMALL BAR
MOUNT
(K095)
CHAIN GAUGE,
BAR
LARGE BAR
LENGTH PITCH IN./CM.
MOUNT
IN.
IN./CM.
(D009)
PART
NO.
DRIVE
LINKS
LAMINATED BAR WITH NOSE SPROCKET
CHAINS
10/58
1/4"
.050/1.3
5758422-58
58
H00
5018440-58
c
12/64
1/4"
.050/1.3
5758422-64
64
H00
5018440-64
c
12/30
3/8 LP
.050/1.3
5768307-45
45
H37 LowVib 5769365-45
n
14/35
3/8 LP
.050/1.3
5768307-52
52
H37 LowVib 5769365-52
c
16/40
38LP
.050/1.3
5768307-56
56
H37 LowVib 5769365-56
10/25
3/8 LP
.050/1.3
5019592-40
40
H37 LowVib 5769365-40
c n c
c c
12/30
3/8 LP
.050/1.3
5019592-45
45
H37 LowVib 5769365-45
c c n
n c
14/35
3/8 LP
.050/1.3
5019592-52
52
H37 LowVib 5769365-52
n
c n
c
16/40
3/8 LP
.050/1.3
5019592-56
56
H37 LowVib 5769365-56
c c c c c c c c
13/33
.325
.050/1.3
5089261-56
56
H30 LowVib 5018406-56
n c c c c c c c
15/38
.325
.050/1.3
5089261-64
64
H30 LowVib 5018406-64
c n c c c c c c
16/40
.325
.050/1.3
5089261-66
66
H30 LowVib 5018406-66
c c n c c c c c
18/45
.325
.050/1.3
5089261-72
72
H30 LowVib 5018406-72
c c c c c
20/50
.325
.050/1.3
5089261-80
80
H30 LowVib 5018406-80
c c c c c c c
13/33
.325
.058/1.5
5089121-56
56
H25 LowVib 5018404-56
c c n c c c c
15/38
.325
.058/1.5
5089121-64
64
H25 LowVib 5018404-64
c c c n c c c
16/40
.325
.058/1.5
5089121-66
66
H25 LowVib 5018404-66
c c c c n c c
18/45
.325
.058/1.5
5089121-72
72
H25 LowVib 5018404-72
c c c c c
20/50
.325
.058/1.5
5089121-80
80
H25 LowVib 5018404-80
c c c
15/38
3/8
.058/1.5
5089141-56
56
H42 LowVib 5018414-56
c c c
16/40
3/8
.058/1.5
5089141-60
60
H42 LowVib 5018414-60
c n c
18/45
3/8
.058/1.5
5089141-68
68
H42 LowVib 5018414-68
20/50
3/8
.058/1.5
5101535-72
72
H42 LowVib 5018414-72
c c c
n = Standard Cutting Equipment
22
PART
NO.
n
c
n
CHAIN
TYPE
c c c
15/38
3/8
.058/1.5
5089131-56
56
H42 LowVib 5018414-56
c c c
16/40
3/8
.058/1.5
5089131-60
60
H42 LowVib 5018414-60
c c c c c
18/45
3/8
.058/1.5
5089131-68
68
H42 LowVib 5018414-68
c c c c c
20/50
3/8
.058/1.5
5442855-72
72
H42 LowVib 5018414-72
c = Optional Cutting Equipment
325P5X / 327P5X
327PT5S
321 Electric
T435 / 334T
338XPT
T540XP
236 / 236e
240e / 240e Trio
435 e
440e / 445e / 445e-Trio
450e
346XP / 346XP-Trio / 550XP-Trio
550XP
357XP / 455R / 455R-AT
555-AT
460
562XP / 556-AT
365 / 372XP
570 / 575XP / 576XP
570-AT / 576XP-AT
390XP / 395XP
3120XP
Bar & Chain Fit-up Guide
MINI BAR
MOUNT
(A041 / A095)
CHAIN GAUGE, PART NO. DRIVE
BAR
LARGE BAR
LINKS
LENGTH PITCH IN./CM.
MOUNT
IN.
IN./CM.
(D009)
SMALL BAR
MOUNT
(K095)
SOLID BAR WITH REPLACEABLE BAR NOSE
c c c c c c c
18/45
.325
c c c c c
20/50
c c c
16/40
c c c
18/45
PART NO.
CHAINS
.058/1.5
502 44 00-72
72
H25 LowVib 501 84 04-72
.325
.058/1.5
608 00 00-09
80
H25 LowVib 501 84 04-80
3/8
.058/1.5
608 00 00-17
60
H42 LowVib 501 84 14-60
3/8
.058/1.5
501 95 77-68
68
H42 LowVib 501 84 14-68
20/50
3/8
.058/1.5
501 95 77-72
72
H42 LowVib 501 84 14-72
c c c c
16/40
3/8
.058/1.5
501 95 69-60
60
H42 LowVib 501 84 14-60
c c c c
18/45
3/8
.058/1.5
501 95 69-68
68
H42 LowVib 501 84 14-68
c c c c c c
20/50
3/8
.050/1.3
608 00 00-46
72
H46 LowVib 501 84 25-72
n n n n c c
20/50
3/8
.058/1.5
501 95 69-72
72
H42 LowVib 501 84 14-72
c c c c c c
22/55
3/8
.058/1.5
501 95 69-76
76
H42 LowVib 501 84 14-76
c c c c n c
24/60
3/8
.058/1.5
501 95 69-84
84
H42 LowVib 501 84 14-84
c c c
28/70
3/8
.058/1.5
501 95 69-92
92
H42 LowVib 501 84 14-92
c c
32/81
3/8
.058/1.5
608 00 00-54
105
H42 LowVib 501 84 14-05
c c
32/81
3/8
.063/1.6
608 00 00-55
105
H45 LowVib 501 87 71-05
c c
32/81
.404
.063/1.6
608 00 00-62
95
c c
36/90
3/8
.063/1.6
502 43 96-15
115
c c c
20/50
.404
.063/1.6
502 07 73-65
65
H57
501 84 34-65
c c c
24/60
.404
.063/1.6
502 07 73-76
76
H57
501 84 34-76
c n
28/70
.404
.063/1.6
502 07 73-84
84
H57
510 09 41-01
c c
36/90
.404
.063/1.6
608 00 00-63
104
H57
501 84 34-04
c c
42/107
.404
.063/1.6
502 07 73-22
122
H57
510 09 43-01
c c n
LASER TIP SOLID BAR
H57
501 84 34-95
H45 LowVib 501 87 71-15
CHAINS
c c c
18/45
3/8
.058/1.5
5019580-68
68
H42 LowVib 501 84 14-68
c c c
20/50
3/8
.058/1.5
5019580-72
72
H42 LowVib 501 84 14-72
c c c
24/60
3/8
.058/1.5
5019580-84
84
H42 LowVib 501 84 14-84
c c c
28/70
3/8
.058/1.5
5019580-92
92
H42 LowVib 501 84 14-92
28/70
.404
.063/1.6
5015896-01
84
c c
n = Standard Cutting Equipment
CHAIN
TYPE
H57
510 09 41-01
c = Optional Cutting Equipment
23
Filing Equipment Guide
HUSQVARNA CHAIN TYPE
FILE
DIAMETER
INCH / MM
FILE
PART NO.
FILE KIT
PART NO.
ROLLER
GUIDE
PART NO.
COMBINATION
GUIDE PART
NO.
DEPTH
GAUGE
PART NO.
H00
5/32” / 4.0mm
5100957-01
5100957-02
5806875-01
5056981-18
5806874-01
–
H35, 36
5/32” / 4.0mm
5100957-01
5100957-02
5056981-38
5052437-01
–
5056981-03
H37
5/32” / 4.0mm
5100955-01
5100955-02
5796536-01
5052437-01
–
5056981-03
H38
4.5mm
5772337-01
–
5795588-01
–
5056981-03
H30
3/16” / 4.8mm
5100955-01
5100955-02
5056981-27
–
5056981-08
5056981-00
H21, 22, 23, 25, 26, 28
3/16” / 4.8mm
5100955-01
5100955-02
5056981-25
5056981-10
5056981-09
5056981-00
H42, 45, 46, 47, 48, 50, 52
7/32” / 5.5mm
5100956-01
5100956-02
5056981-30
–
5052435-01
5056981-01
H51, 54, 58
7/32” / 5.5mm
5100956-01
5100956-02
–
5759915-01
–
5056981-01
H56S, 57, 58S, 64, 64S, 65, 66
7/32” / 5.5mm
5100956-01
5100956-02
5056981-92
5056981-15
–
5056981-02
5039543-01
5373494-03
5744795-01
5024650-01
5372973-01
24
355FX / 555FX
345FX / 345FR
343R / 345RX
S1
135R / 333R
335RX / 535RX
535RXT
S
324RX / 325RX
327RX / 525RS
324LD / 325LD
327LD
S
335LS / 535LS
535RJ
524L / 525LST
525RJD
S
S
S
S
S
S
O
Combi Guards
5450309-01
5039342-02
5373316-01
Blade Guards
5372885-01 (300mm Blades)
5372171-01 (200mm Blades)
5013204-02 (200mm Blades) adaptor incl.
5745067-02 (225mm Blades) Aluminium
5745067-02
5024649-01
5372974-01
Support Cups
5038901-01
5039018-02
5038901-02
5021570-02
Transport Guards
5373129-01
5022623-01
S = Standard Equipment
323L / 326LS
327LS
Trimmer Guards
5039771-01
233RJ
125R / 128R
122C
TRIMMER, BRUSHCUTTER &
CLEARING SAW MODELS
124L / 125L
125LD / 128LD
122LD
Guard Application Guide
S
O
O
S
S
S
S
S
S
S
S
S
S
O
S
O
O
O
S
S1 = Standard Equipment with trimmer attachment
S
S
S
O
S
S
S
S
S
S
S
S
O = Optional Equipment
S
S
O
O
O
O
O
355FX /
555FX
O
343FR /
345FR
O
333R /
335RX
525RJD
O
535RJ
324LD-MUO
327LD-MUO
O
233RJ
525LST
O
525RSR
524L
O
324RX /
327RX
326LS /
327LS
O
335LS /
535LS
323L
135R / 535RX
535RXT
128R
128LD
122LD /
124L
TRIMMER, BRUSHCUTTER &
CLEARING SAW MODELS
122C / 124C /
128C
Trimmer Head & Blade Application Guide
TRIMMER HEADS
Manual Heads
5784474-01
S35 - M10
5784476-01
S35 - M12
5759898-01
Alloy Head (Fixed Line)
5784478-01
(Free-wheeling plate)
Trimmy SII M12
O
O
O
O
O
O
O
O
O
O
O
S
O
O
O
O
O
O
O
O
O
O
O
O
O
S
S
O
Tap 'N Go™ Heads
9666744-01
T25 3/8" RH
9666744-01
T25 M10
9666744-01
T25 3/8" LH
5784463-01
S
S
S
O
O
O
O
O
O
O
O
O
T35 - M10
O
O
S
O
S
O
S1
O
S
O
S
5784465-01
T35 X - M10
O
O
O
S
O
S
O
S
O
S
O
5449090-02
T35 - M12
S
S
5784466-01
T35 X - M12
O
O
O
O
5784468-01
T45 X - M12
O
S
O
O
5784470-01
T55 X - M12
O
S
O
O
O
Automatic Heads
5310092-26
Auto 55 - M12
O
O
O
O
O
O
O
O
O
O
O
O
S
S
O
O
O
Tri-Cut Heads
5784491-01
Tri-cut M10
5784493-01
Tri-cut M12
O
O
O
O
O
O
O
O
O
O
O
O
O
BLADES
Grass Blades
5784440-01
225-8T 1in
5784437-01
255-4T 1in
O*
O
O
O
O
S
S
O
O
O
S
S
S1
S
O
O
O
S
S
Multi Blades
5784449-01
255-3T 1in
O
O
O
O
O
O
5784447-01
275-4T 1in
O
O
O
O
O
O
5784445-01
300-3T 1in
O
O
O
S
S
O
Shredder Blade
5784453-01
Shredder Blade - 1in
O
Saw Blades - Maxi
5784431-01
200-26T 1in
O
O
O
O
O
O
O
O
O
O
O
O
S
S
O
O
O
O
O
O
O
Saw Blades - Scarlett
5784425-01
200-22T 1in
5784426-01
200-22T 20mm
5784427-01
225-24T 1in
O
KITS
5370485-01
J-handle Kit
9527156-16
J-handle Kit
5442496-01
J-handle Kit
5448429-01
Shredder Blade Kit
S = Standard Equipment
* = Not applicable to 122LD
**
O
**
**
**
**
**
O*
O
**
O
S1 = Standard Equipment with Trimmer Attachment
** = J Handle Kit Components Included with unit
O = Optional Equipment
25
With 325 years of engineering excellence behind us,
Husqvarna is the brand you can trust.
The strength of the Husqvarna brand has been forged by a history that goes all the way back
to 1689, when Husqvarna first laid the foundation for the engineering expertise that has led
us to develop world class outdoor power equipment today. Husqvarna aims to provide you
total satisfaction with product performance, reliability and safety.
With this in mind, Husqvarna offers a 5 year Domestic Warranty* period when you buy
genuine Husqvarna oil with your new Husqvarna product.
Conditions apply, ask instore for full
details or visit www.husqvarna.com
*
26
27
Husqvarna New Zealand Ltd. Company No. 111 861.
PO Box 76-437, Manukau City, Auckland 2241. Phone: 09 920 2410. Fax: 09 920 2429.
Comm Ref: 2014ACCES
Husqvarna Australia Pty Ltd. ABN 45 115 475 619
Locked Bag 5, Central Coast BC NSW 2252. Phone: 02 4352 7400. Fax: 02 4352 7499
Part Number: 585 22 41-01
www.husqvarna.com
Husqvarna is a registered trademark. Copyright © 2014 HUSQVARNA. All rights reserved.