Decora Devices
®
Leviton’s Decora designer line of wiring devices
adds contemporary styling to any residential or
commercial application. Decora Devices are built to
the highest performance standards to provide a
long, trouble-free service life. The Decora Devices
line represents a broad selection of switches,
receptacles, surge suppressor receptacles,
SmartLock™ GFCI receptacles, lighting controls,
occupancy sensors, fan speed controls, combination devices, wall jacks and wallplates.
General Overview__________________A1
Decora Switch Overview ____________A2
COMMERCIAL GRADE SWITCHES
Decora Plus AC Quiet
Rocker Switches_________________A3
Decora Plus Momentary and
Maintained Switches _____________A4
Decora Plus Illuminated
and Pilot Light Switches __________A5
RESIDENTIAL GRADE SWITCHES
Decora AC Quiet
Rocker Switches _____________A6–A7
Quickwire® & Side Wired ________A6
Quickwire & Side Wired
Illuminated, Pilot Light __________A7
INDUSTRIAL AND COMMERCIAL GRADE
RECEPTACLES
Decora Receptacles Overview _____A8
Decora Plus Receptacles _____A9–A10
Back & Side Wired _____________A9
Engraved Wallplates for
IG Devices ____________________A9
Back & Side Wired,
Self Grounding _______________A10
Side Wired, Self Grounding _____A10
Mural™ Digital Rocker Dimmer ____A19
TouchPoint™ Digital
Touch-Pad Dimmer______________A20
True Touch™ Digital
Touch Dimmer__________________A21
IllumaTech™ Preset Slide Controls _A22
IllumaTech™ Rotary Controls _____A23
IllumaTech™ Non-Preset
Slide Controls __________________A24
SureSlide™ Lighting &
Fan Speed Controls _____________A25
Decora Four-Level Step Dimmer___A26
Decora 911 Flasher Switch _______A26
Decora Plus Electronic
Timer Switches _________________A27
Decora Time Delay Switches ______A27
Decora Plus Programmable Timer and
Variable Countdown Switches ____A28
Decora Occupancy Sensor
Wall Switches __________________A29
COMMERCIAL GRADE DEVICES
SMARTLOCK™ GFCI RECEPTACLES
Decora Combination Devices _A30–A31
Decora Voice/Data/Video Devices __A32
Type 625 Telephone Wall Jacks__A32
F Connector Wall Jacks ________A32
Voice/Data with QuickPort®
Modules _____________________A32
Decora Plus Canadian 347VAC Quiet
Rocker Switches________________A33
Canadian 347V Midway
Nylon Wallplates ______________A33
SmartLock Overview ____________A13
GFCI Receptacles_____________A14
Combination Switch/GFCI Outlet A14
Blank Face, Switch Rated ______A14
Screwless Snap-On _____________A34
Nylon _________________________A34
Metal _________________________A34
RESIDENTIAL GRADE RECEPTACLES
Decora Quickwire® & Side Wired___A11
HOSPITAL AND INDUSTRIAL GRADE
SURGE SUPPRESSOR RECEPTACLES
Decora Back & Side Wired________A12
DECORA LIGHTING &
FAN SPEED CONTROLS
Decora Lighting Controls Overview A15
Mural™ Scene-Capable
Digital Rocker Dimmer ______A16 - A17
Mural™ L/S Digital
Preset/Rocker Dimmer___________A18
DECORA PLUS WALLPLATES
DECORA WALLPLATES
Standard Size Plastic ____________A35
Midway Size Plastic _____________A35
Replacement Screws ____________A36
Standard Size Plastic Adapters ____A36
Decora Plus Standard Size
Plastic Adapters ________________A36
S E C T I O N
A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Decora Devices
Features and Benefits
Decora Colors
■
Decora Devices are engineered for beauty, versatility and durability.
■
All Decora Plus Commercial Grade devices feature heavy-duty construction.
■
Decora Lighting Controls offer the lighting design professional a comprehensive selection
of Decora lighting and fan speed controls.
■
All Decora devices meet or exceed applicable UL, CSA and NOM testing standards.
■
Backed by a Limited 10-Year Warranty
Decora devices are offered in a wide
range of colors and finishes, which
includes Mahogany Brown, Ivory,
White, Almond, Gray, Red and Ebony
(Black). A selection of metal Decora
wallplates comes in aluminum,
polished brass, brushed brass and
satin-finish stainless steel. Clear
Decora wallplates achieve a seamless finish for your elegantly papered
and textured walls.
Almond
White
Ivory
Gray
Red
Ebony
(Black)
Brushed
Brass
Polished
Brass
Stainless
Steel
Aluminum
Clear
Mahogany
Brown
Decora ® Devices Add an Air of Distinction to Fine Interiors Everywhere
Decora Switches
A complete range of
single pole, double
pole, 3 and 4-way
switches in both
residential and
commercial grades.
Cat. Nos. 5691-2E,
5621-2W
Decora Combo Devices
Compact design fits
dual or triple switch,
switch/receptacle, or
switch/GFCI receptacle into standard
wallboxes.
Cat. No. No. 8299-W
A1
Decora Receptacles
A broad selection of
amperages and
NEMA configurations in Industrial,
Commercial and
Residential grades
with an array of
colors from which to
choose.
Cat. No. 16352-GY
Decora Lighting Controls
Leviton makes a
comprehensive
selection of Decora
lighting controls for
incandescent, lowvoltage and fluorescent lamp types with
advanced lighting
control technologies.
Cat. No. MDI06-1LW
Decora Illuminated
Switches
Decora Hospital Grade
Receptacles
Pilot Light,
Illuminated Rocker,
Maintained and
Momentary
Contact versions.
Leviton’s selection
includes Isolated
Ground, Tamper
Resistant, Surge
Protected, GFCI and
Power Light™ versions
Cat. No. 5631-2A,
5628-2I
Cat. No. 16262-IGR
Fan Speed Controls
Decora Communications
Wiring Devices
Decora Fan Speed
Controls provide convenient operation of
ceiling, attic, kitchen
and bathroom fans for
maximum comfort and
efficiency.
Pre-configured and
field-configurable jacks
accommodate Decora
wallplates, complementing other Decora
wiring devices, and fit
in standard NEMA wallboxes.
Cat. No. IPF05-1LW
Cat. No. 41658-W
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Devices
Leviton’s Decora line of designer-style switches
are available in a complete range of single pole,
double pole, 3 and 4-way switches in both residential
and commercial grades. They come in a cascade of
contemporary shades and add an air of distinction
and value to contemporary commercial and
residential design schemes.
Triple combination-head
mounting screws
(straight slot, Phillips and
Robertson head)
One-piece wrap-around
heavy gauge steel strap
incorporates locking tabs
for extra strength
Features and Benefits
■
Engineered for fine tolerances and top performance
■
Decora Plus Switches feature impact resistant
thermoplastic construction for long service life
■ All
Decora devices meet or exceed applicable UL,
CSA and NOM testing standards
Decora Plus
Switches have
patented concave
rockers that present
a low profile
Decora Plus Switches
feature back and side
wiring terminals and
accept both stranded
and solid conductors
Groundmatic ®
self-grounding clip
Cat. No. 5691-2
Decora ® Switches Enhance Every Interior
Decora Plus
Illuminated
Pilot Light
Momentary Contact
A complete range of
rugged Commercial
Specification Grade
single pole, double
pole, 3 and 4-way
switches.
Rocker lens is
illuminated when load
is OFF.
Rocker lens is
illuminated when load
is ON.
Combines Decora
styling and rugged
construction for
momentary contact
closure (single-pole,
double-throw,
center OFF
switching).
Cat. Nos. 5621-2A,
5691-2A
Cat. No. 5631-2I
Cat. No. 5628-2E
Cat. No. 5657-2A
Maintained Contact
Residential Grade
Electronic Timer
Rugged Decora
styling for maintained
contact closure
(single-pole, doublethrow, center OFF
switching).
Engineered for smooth,
quiet operation and a
long trouble-free service
in fine residential
interiors.
Four preset buttons
permit selective time
control of lights and
appliances. Ideal for
outdoor lights, spas,
Jacuzzis and fans.
Cat. No. 5685-2E
Cat. No. 5601-2IM
Cat. No. 6515M-W
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
AC Quiet
Rocker Switches
Back and Side Wired 120/277V AC
DESCRIPTION
15 AMP
20 AMP
ROCKER & FRAME COLOR*
Basic Cat. No. Denotes Mahogany
Single-Pole
5691-2
5621-2†
Double-Pole
—
5622-2
I, W, A, GY, E
Three-way
5693-2
5623-2†
I, W, A, GY, E
Four-way
—
5624-2
I, W, A, GY
†Available
I, W, A, GY, E
in Red (-R)
5691-2GY in 80301-GY
1.60 (40.7mm)
1.76 (44.6mm)
2.75 (69.8mm)
3.28 (83.3mm)
1.16 (29.4mm)
2.62 (66.5mm)
Back and Side Wired
• Full rated current capacity with tungsten,
fluorescent or resistive loads. Motor capacity
is 80% of switch rating
• Back and side-wiring terminals accept both
solid and stranded wire to ease installation
• New architecturally-styled smooth-action
concave rocker
• Heavy-duty impact-resistant thermoplastic
construction for long service life in commercial applications
• Two ground connection options: a green
grounding screw and a self-grounding clip
• For Canadian 347V Decora Plus Switches,
see page A33
4.06 (103.2mm)
SPECIFICATIONS & FEATURES
TESTING & CODE COMPLIANCE
•
•
•
•
UL Listed (File #E-7458)
CSA Certified (File #LR-3413)
NOM Certified (#057)
Compliance with the latest Federal
Specification WS-896
• Backed by a Limited 10-Year Warranty
*COLOR
Back and Side Wired
Colors available as listed. For other color selections,
add suffix to catalog numbers as follows: Ivory (-I),
White (-W), Almond (-A), Gray (-GY), Black (-E),
Red (-R).
Imprinted Decora Switches
Custom orders available in Ivory (-I), White (-W).
1.30 (33.0mm)
1.42 (36.1mm)
SINGLE POLE
Cat. Nos. 5621-2 & 5691-2
THESE DIMENSIONS APPLY TO ALL SWITCHES ON THIS PAGE
HORSE POWER
15A
__
@ 120V
2 @ 240V
1⁄ 2
20A
__
1 @ 120V
2 @ 240V
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
A3
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Momentary
and Maintained Switches
Commercial Grade
Back and Side Wired Momentary Contact 15 AMP 120/277V AC
DESCRIPTION
CAT. NO.
COLOR*
Basic Cat. No. Denotes Mahogany
Single Pole, Double Throw,
Center OFF
5657-2
I, W, A, GY, E
Back and Side Wired Maintained Contact 15 AMP 120/277V AC
DESCRIPTION
CAT. NO.
COLOR*
Basic Cat. No. Denotes Mahogany
Single Pole, Double Throw,
Center OFF
5685-2
I, W, A, GY, E
Double Pole, Double Throw,
Center OFF
5686-2
I, W, A
(No Mahogany)
5686-2W in 80301-W
All devices are UL Listed and CSA Certified.
5686-2I in 80301-I
1.60 (40.7 mm)
1.70 (43.1 mm)
2.75 (69.8 mm)
4.06 (103.2 mm)
3.28 (83.3 mm)
2.62 (66.5 mm)
1.16 (29.4 mm)
SPECIFICATIONS & FEATURES
• Full rated current capacity with tungsten,
fluorescent or resistive loads. Motor capacity
is 80% of switch rating
• Wrap-around heavy-gauge strap with locking
tabs for added strength
• Back and side-wiring terminals accept both
solid and stranded wire to ease installation
TESTING & CODE COMPLIANCE
•
•
•
•
UL Listed (File #E-7458)
CSA Certified (File #LR-3413)
NOM Certified (#057)
Meets requirements of latest Federal
Specification WS-896
• Backed by a Limited 10-Year Warranty
*COLOR
1.30 (33.0 mm)
1.42 (36.1 mm)
Colors available as listed. For other color selections,
add suffix to catalog numbers as follows: Ivory (-I),
White (-W), Almond (-A), Gray (-GY), Black (-E).
HORSE POWER
15A
__
@ 120V
2 @ 240V
SINGLE POLE
Cat. Nos. 5657 and 5685
THESE DIMENSIONS APPLY TO ALL SWITCHES ON THIS PAGE
1⁄ 2
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Illuminated
and Pilot Light Switches
20 AMP Back and Side Wired Illuminated
(Illuminated when load is OFF—Does not require a neutral wire)
DESCRIPTION
CAT. NO.
COLOR*
Single-Pole, 120V AC
5631-2
I, W, A, E
Three-way, 120V AC
5633-2
I, W, A
Single-Pole, 277V AC
5649-2
I, W
Three-way, 277V AC
5659-2
W
20 AMP Back and Side Wired Pilot Light
(Illuminated when load is ON—Requires a neutral wire)
5631-2W in 80301-W
DESCRIPTION
CAT. NO.
COLOR*
Single Pole, 120V AC
5628-2
I, W, A
Three-way, 120V AC
5638-2
I, W, A
Single Pole, 277V AC
5629-2
I, W
Three-way, 277V AC
5639-2
W
All devices are UL Listed and CSA Certified.
5628-2A in 80301-A
SPECIFICATIONS & FEATURES
• 20A, 120 and 277V single-pole and 3-way
versions
• Pilot Light rocker visible when ON even in
bright light
• Back and side-wiring terminals accept both
solid and stranded wire to ease installation
• Two ground connection options: a green
grounding screw and a self-grounding clip
1.60
(40.7 mm)
1.76
(44.6 mm)
1.16 (29.4 mm)
Colors available as listed. For other color selections,
add suffix to catalog numbers as follows: Ivory (-I),
White (-W), Almond (-A), Black (E).
2.75 (69.8 mm)
*COLOR
3.53 (89.7 mm)
UL Listed (File #E-7458)
CSA Certified (File #LR-3413)
NOM Certified (#057)
Compliance with the latest Federal
Specification WS-896
• Backed by a Limited 10-Year Warranty
2.62 (66.5 mm)
•
•
•
•
4.31 (109.5 mm)
TESTING & CODE COMPLIANCE
HORSE POWER
20A
__
1 @ 120V
2 @ 240V
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
1.30 (33.0 mm)
1.42 (36.1 mm)
THESE DIMENSIONS APPLY TO ALL SWITCHES ON THIS PAGE
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
A5
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Decora AC Quiet Rocker Switches
15 AMP Quickwire Push-In and Side Wired 120/277V AC
DESCRIPTION
CAT. NO.
ROCKER/FRAME COLOR*
Single-Pole
5601
5601-I
5601-W
5601-2A
5601-2E
5601-2GY
Mahogany
Ivory
White
Almond
Ebony
Gray
Double-Pole
5602-2
5602-2I
5602-2W
5602-2GY
5602-2A
5602-2E
Mahogany
Ivory
White
Gray
Almond
Ebony
Three-Way
5603
5603-I
5603-W
5603-2A
5603-2E
5603-2GY
Mahogany
Ivory
White
Almond
Ebony
Gray
Four-Way
5604-2
5604-2I
5604-2W
5604-2A
5604-2E
5604-2GY
Mahogany
Ivory
White
Almond
Ebony
Gray
5601-2GY in 80301-GY
SPECIFICATIONS & FEATURES
Note: To order Decora rocker switches with grounding screw add suffix -2 (e.g. 5601-2I)
All devices are UL Listed and CSA Certified.
0.99 (25.2 mm)
5601-I in 80301-I
1.40 (35.5 mm)
• Switch frame shields against dust and fits in
wallplate to prevent rocker binding
• Side Wire and Quickwire (No.12 or No.14
copper or copper-clad wire) push-in terminal
wiring options
• Sturdy construction for long service life
• Full rated current capacity with tungsten,
fluorescent or resistive loads. Motor capacity
is 80% of switch rating
• Conform to all NEMA standard specifications
4.20 (106.7 mm)
3.26 (82.8 mm)
2.61 (66.2 mm)
TESTING & CODE COMPLIANCE
•
•
•
•
UL Listed (File #E-7458)
CSA Certified (File #LR-3413)
NOM Certified (#057)
Backed by a Limited Two-Year Warranty
*COLOR
Rocker/Frame colors available as listed.
HORSE POWER
15A
__
@ 120V
2 @ 240V
1⁄ 2
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
1.38 (34.9 mm)
1.31 (33.3 mm)
DECORA AC QUIET ROCKER SWITCHES
Cat. Nos. 5601, 5602, 5603, 5604
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A6
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Decora AC
Quiet Rocker Switches
Quickwire and Side Wired Illuminated 15 AMP 120/277V AC
(Illuminated when load is OFF–Does not require a neutral wire)
DESCRIPTION
CAT. NO.
COLOR*
Single Pole
5611-I
Ivory
5611-W
White
5611-2A
Almond
5613-I
Ivory
5613-W
White
5613-2A
Almond
Three-Way
5611-I in 80301-I
Four-Way
5614-2I
Ivory
5614-2W
White
5614-2A
Almond
Note: To order Decora rocker switches with grounding screw add suffix -2 (e.g. – 5611-2I)
Quickwire and Side Wired Pilot Light 15 AMP 120V AC
(Illuminated when load is ON–Requires a neutral wire)
DESCRIPTION
CAT. NO.
COLOR
Single Pole
5618-2
I, W, A
Quickwire and Side Wired Imprinted 15 AMP 120/277V AC
5618-2A in 80301-A
SPECIFICATIONS & FEATURES
• Illuminated Switch rocker illuminated when
load is OFF
• Pilot Light switch rocker visible when ON
even in bright light
• Switch border shields against dust and fits in
wallplate to prevent rocker binding
• Side-wiring terminals accept both solid and
stranded wire to ease installation
• Full rated current capacity with tungsten,
fluorescent or resistive loads. Motor capacity
is 80% of switch rating
• Conform to all NEMA standard specifications
Imprinted Decora Switches
• Stock Decora switches available with choice of
three imprints on rocker: FAN, DISPOSAL,
OIL BURNER
DESCRIPTION
CAT. NO.
STOCK MESSAGES AVAILABLE
Single Pole, Ivory, Stock
or Custom Imprinted
5601-Z2I
FAN, DISPOSAL, OILBURNER
Single Pole, White, Stock
or Custom Imprinted
5601-Z2W
FAN, DISPOSAL, OIL BURNER
All devices are UL Listed and CSA Certified.
0.99
(25.2 mm)
1.40
(35.5 mm)
0.99
(25.2 mm)
1.40
(35.5 mm)
4.06 (103.2 mm)
Quickwire and Side Wired – Illuminated and
Pilot Light
For color choice add suffix as follows: Ivory (-I),
White (-W), Almond (-A).
3.26 (82.8 mm)
*COLOR
2.61 (66.2 mm)
UL Listed (File #E-7458)
CSA Certified (File #LR-3413)
NOM Certified (#057)
Backed by a Limited Two-Year Warranty
4.06 (103.2 mm)
2.61 (66.2 mm)
•
•
•
•
3.26 (82.8 mm)
TESTING & CODE COMPLIANCE
HORSE POWER
15A
__
@ 120V
2 @ 240V
1⁄ 2
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
1.38
(34.9 mm)
1.31
(33.3 mm)
ILLUMINATED
Cat. No. 5611
1.38
(34.9 mm)
1.31
(33.3 mm)
PILOT LIGHT
Cat. No. 5618-2I
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
A7
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial Grade
Decora Receptacles
Leviton’s Decora line of designer-style
receptacles are available in Industrial Grade
(including Hospital Grade), Commercial Grade
and Residential Grade, with a number of wiring
options and features. They come in a variety of
contemporary shades and add contemporary
style to fine interiors everywhere.
Features and Benefits
■
Engineered for fine appearance and top performance in demanding commercial and institutional
applications using a durable, thermoplastic face
and impact-resistant construction
■
Shallow design for maximum wiring room in wallbox
■
Back Wire and Side Wire terminal wiring options for
ease of installation
■
Heavy-gauge zinc-plated steel locked-in wraparound strap
■
Triple-wipe brass contacts for long service life
■
Exclusive V-shaped, serrated back wiring clamps
for superior contact and conductivity
Labor-saving
self-grounding strap
Heavy-gauge zincplated steel locked-in
wrap-around strap
Triple-wipe brass
contacts for long
service life
Back and side
wiring holes accept
No. 12 or No. 14
copper or copperclad wire
Combination triple-drive
Brass #10-32 screws
(Standard, Phillips,
Robertson) for fast
installation.
■ Available in an array of colors to coordinate with any
interior
■
Backed by a Limited 10-Year Warranty
Cat. No. 16252-W
The Beauty, Durability and Versatility of Decora® Receptacles
Hospital Grade Tamper
Resistant
Dual Voltage
Surge Suppressor
These Hospital Grade receptacles incorporate a unique shutter
mechanism that opens easily
for insertion of 2 or 3-prong
plugs, but prevents the insertion
of small objects into either
outlet slot.
Maintain the consistent look of
Decora style receptacles
throughout commercial settings
even when the need arises for
Dual Voltage 15A 125 and
15A 250V duplex receptacles.
Decora-style single and duplex
surge-protective receptacles,
including versions with audible
alarm, LED indicator light and
Isolated Ground.
Cat. No. 16262-SGI
Cat. No. 16292-I
Cat. No. 8280-IGB
Hospital Grade Power Light™
SmartLock™ GFCI
Residential
Power Light™ meets UL 498
Hospital Grade identification
requirements and provides
visual confirmation that the
device is energized.
SmartLock™ GFCI meets or
exceeds UL 2003 requirements
and features a patented lockout action that blocks RESET if
GFCI protection has been
compromised.
Receptacles engineered for
elegant appearance, speedy
installation and a long troublefree service life for fine residential
applications.
Cat. No. 16362-PLR
Cat. No. 8599-W
Cat. No. 5325-I
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A8
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Receptacles
Industrial Grade
Back and Side Wired NEMA 5-15R & 5-20R (Basic Cat. No. denotes Mahogany
device except where noted)
DESCRIPTION
CAT. NO./COLOR*
15A/125V
CAT. NO./COLOR*
20A/125V
G
W
G
5-15R
16262-SGI in 80301-I
5-20R
W
Hospital Grade, Duplex
16262-HG
I, W, G, R (No Mahogany)
16362-HG
I, W, G, R
Hospital Grade,
Tamper Resistant Duplex
16262-SG
I, W, R
Hospital Grade,
Isolated Ground Duplex
(Not Self-Grounding)
16262-IG (Basic Cat. No. Orange)
B, I, W, G, R, E
16362-IG (Basic Cat. No. Orange)
B, I, W, G, R, E
Hospital Grade,
Power Light™ Duplex
16262-PL
I, W, R (No Mahogany)
16362-PL
I, W, R (No Mahogany)
Industrial Grade,
Duplex
16262
I, W, GY, E
16362
I, W, GY, E, A
—
Back and Side Wired NEMA 6-20R
DESCRIPTION
CAT. NO./COLOR*
20A/250V
G
6-20R
•
•
•
•
UL Listed (File #E-13399
CSA Certified (File #LR-406)
NOM Certified (#057)
Backed by a Limited 10-Year Warranty
DESCRIPTION
CAT. NO.
COLOR*
Decora Receptacle Wallplate
80401-IG
Orange only
All devices are UL Listed and CSA Certified.
1.52
(38.7 mm)
0.88 (22.4 mm)
4.06 (103.2 mm)
TESTING & CODE COMPLIANCE
Wallplates for Isolated Ground Devices
Engraved with "Isolated Ground"
3.28 (83.3 mm)
• Durable thermoplastic face in an array of
contemporary colors
• Receptacles have a locked-in mounting
strap with a self-grounding clip riveted to
the strap (Except Isolated Ground devices)
• Hospital Grade Tamper-resistant receptacles
include a unique shutter mechanism that
opens easily for the insertion of 2 or 3-prong
plugs while preventing entry by other small
objects into either outlet slot
• Hospital Grade Isolated Ground receptacles
(identified by an orange face or triangle on
the face) protect sensitive electronic equipment and eliminate electromagnetic interference by providing a separate path to ground
• Power Light meets UL 498 Hospital Grade
identification requirements and provides
visual confirmation that the device is
energized.
• Back and side wiring terminals permit fast
installation of up to # 10 solid or stranded
conductors
• Triple-wipe copper alloy contacts ensure
maximum conductivity
16462-HG
3.81 (96.8 mm)
SPECIFICATIONS & FEATURES
Hospital Grade, Duplex
I, W (No Mahogany)
2.78 (70.6 mm)
16362-PLR
*COLOR
Basic Cat. Nos. denote Mahogany device (unless indicated) and Orange for Isolated Ground (-IG) Devices.
Isolated Ground Receptacle is distinguished by an
orange triangle on its face. For other color selections,
add suffix to the catalog number as follows: Ivory (-I),
White (-W), Almond (-A), Mahogany (for IG devices only,
add -B), Red (-R), Gray (-G or -GY) and Black (-E).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 60°C
Maximum Continuous
1.14
(29.0 mm)
1.31
(33.3 mm)
ALL RECEPTACLES ON THIS PAGE
Cat. No. 16262 Shown
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
A9
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Receptacles
Commercial Grade
Back and Side Wired, Self-Grounding*
NEMA 5-15R, 6-15R, 5-20R & 6-20R (Basic Cat. No. Denotes Mahogany Device*)
DESCRIPTION
CAT. NO./COLOR
15A/125V
CAT. NO./COLOR CAT. NO./COLOR CAT. NO./COLOR
15A/250V
20A/125V
20A/250V
G
G
5-15R
W
6-15R
5-20R
G
W
G
6-20R
Duplex
16252
I, W, GY, E, A
16662
I, W
16352
I, W, GY, E, A
16462
I, W, E
Single★
16251
I, W
16651
I, W
(No Mahogany)
16351
I, W
16451
I, W
(No Mahogany)
16251-W in 80301-W
*Self-grounding when installed in a properly grounded metal wallbox
Side Wired, Self-Grounding* NEMA 5-15R, 6-15R, 5-20R & 6-20R
(Basic Cat. No. Denotes Mahogany Device*)
DESCRIPTION
CAT. NO./COLOR
15A/125V
CAT. NO./COLOR CAT. NO./COLOR CAT. NO./COLOR
15A/250V
20A/125V
20A/250V
G
G
5-15R
W
6-15R
5-20R
G
W
G
6-20R
Duplex
16242
I, W, E
(No Mahogany)
—
16342
I, W, GY, E
—
Single★
16241
I, W
(No Mahogany)
16641
I, W
(No Mahogany)
16341
I, W, GY, A
16441
I, W, A
(No Mahogany)
16352-W in 80301-W
*Self-grounding when installed in a properly grounded metal wallbox
Back and Side Wired, Self-Grounding*
125V/250V Dual Voltage NEMA 5-15R & 6-15R
SPECIFICATIONS & FEATURES
DESCRIPTION
15AMP
COLOR*
Duplex, Dual Voltage
16292
I, W
• Back Wire and Side Wire terminal
options
• Heavy-gauge zinc-plated steel
locked-in wrap-around strap
• Terminal screws accept up to No. 10
copper or copper-clad wire, solid or
stranded
• Back wire terminals accept up to
No. 10 copper or copper-clad wire,
solid or stranded
• Labor-saving self-grounding clip
• Heavy-duty triple-wipe brass contacts for long service life
• Impact-resistant thermoplastic construction
*Self-grounding when installed in a properly grounded metal wallbox
All devices are UL Listed. Also CSA Certified except where indicated by★
1.06
(26.9 mm)
1.31
(33.3 mm)
SINGLE BACK AND SIDE WIRED,
SELF-GROUNDING
Cat. No. 16251
0.84
(21.4 mm)
4.06 (103.2 mm)
TESTING & CODE COMPLIANCE
2.78 (70.6 mm)
2.36 (60.0 mm)
0.82
(20.8 mm)
4.06 (103.2 mm)
3.28 (83.3 mm)
1.29
1.10
(28.0 mm)
1.31
(33.3 mm)
DUPLEX BACK AND SIDE WIRED,
SELF-GROUNDING
Cat. No. 16252
•
•
•
•
UL Listed (File #E-13399
CSA Certified (File #LR-406)
NOM Certified (#057)
Backed by a Limited 10-Year
Warranty
*COLOR
Basic Cat. No. denotes Mahogany device
(unless indicated). For other color selections, add suffix to the catalog number as
follows: Ivory (-I), White (-W), Almond (-A),
Gray (-GY) and Black (-E).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94,
V2 Rating
Operating Temperature: -40°C to 60°C
Maximum Continuous
For more information regarding
matching wallplates, colors,
materials, single and multi-gang,
refer to Wallplates, section G.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A10
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Decora AC Receptacles
Side Wire and Quickwire NEMA 5-15R
DESCRIPTION
15 AMP
COLOR
Basic Cat. No. Denotes Mahogany
G
5-15R
W
Duplex
5325
I, W, A, GY, E
Duplex, Self-Grounding Clip
5325-S†
I, W, A (No Mahogany)
Duplex, 8-Hole Quickwire
5328
I, W, A (No Mahogany)
†Self-grounding
when installed in a properly grounded metal wallbox
All devices are UL Listed and CSA Certified.
5325-W in 80301-W
5325-GY in 80301-GY
SPECIFICATIONS & FEATURES
0.70 (17.8 mm)
1.30 (33.0 mm)
*COLOR
4.00 (103.2 mm)
UL Listed (File #E-13399)
CSA Certified (File #LR-406)
NOM Certified (#057)
Backed by a Limited One-Year Warranty
3.28 (83.3 mm)
•
•
•
•
2.77 (70.5 mm)
TESTING & CODE COMPLIANCE
3.81 (96.8 mm)
• Side Wire and Quickwire™ holes accept
No. 14 AWG copper wire for Cat. No. 5325
• Heavy-gauge zinc-plated steel mounting strap
• Heavy duty double-wipe brass contacts for
long service life
Basic Cat. No. denotes Mahogany (Brown) device
unless indicated. For other color selections, add suffix
to the catalog number as follows: Ivory (-I), White (-W),
Almond (-A), Gray (-GY), and Black (-E).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 60° C
Maximum Continuous
0.98 (24.8 mm)
1.31 (33.3 mm)
DUPLEX QUICKWIRE PUSH-IN AND SIDE-WIRED
Cat. No. 5325
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
A11
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Decora Surge
Suppressor Receptacles
Industrial Grade
Back and Side Wired NEMA 5-15R & 5-20R
(Basic Cat. No. denotes Mahogany device, except where indicated)
DESCRIPTION
CAT. NO./COLOR*
15A/125V
CAT. NO./COLOR*
20A/125V
G
5-15R
5-20R
W
G
W
Hospital Grade, Surge Duplex with
Indicator Light & Audible Alarm
8280
I, W, A, R, B
8380
I, W, GY, R, B
Hospital Grade, Surge Single with
Indicator Light & Audible Alarm
—
8381
I, GY, R
Hospital Grade, Isolated Ground,
Surge Duplex with Indicator Light
& Audible Alarm
8280-IG
I, W, G, A, R, B, O
8380-IG
I, W, A, G, B, O
(No Mahogany)
(No Mahogany)
Hospital Grade, Isolated Ground,
Surge Single with Indicator Light
& Audible Alarm
8281-IG
I, W, A, G, O
8381-IG
I, W, B, O
(No Mahogany)
(No Mahogany)
Industrial Grade, Surge Duplex with
Indicator Light & Audible Alarm
7280
I, W, GY, A, B
7380
I, W, GY, B
IIndustrial Grade, Surge Duplex
with Indicator Light
5280
I, W, GY, A, B
5380
I, W, GY, B
Industrial Grade, Isolated Ground,
Surge Duplex with Indicator Light
5280-IG
I, W, G, A, B, O
5380-IG
I, W, G, B, O
8280-R
All devices are UL Listed and CSA Certified.
8381-I
2.62 (66.6 mm)
SPECIFICATIONS & FEATURES
(33.0 mm)
1.22
(31.0 mm)
ALL SURGE RECEPTACLES ON THIS PAGE
Cat. No. 8280-IG Shown
• Decora-styled TVSS receptacles protect
sensitive electronic equipment against
transient voltage surges
• UL 1449 Suppressed Voltage Ratings: 400V
for all 3 modes (line-neutral, line-ground,
neutral ground)
• Fuse-protected internal circuitry
• Super impact-resistant Lexan face
• RFI and EMI noise filtration (-35db, @
5KHz-5MHz)
• Supplied with Decora wallplate
• Hospital Grade and Isolated Ground versions
include green LED indicator light that goes
out and audible alarm that sounds when
protection is lost
• Industrial Grade versions include green LED
indicator light that goes out when protection
is lost
• Maximum Continous Operating Voltage: 150V
• Maximum single-pulse transient current
(8 x 20 ms Amps peak) 24,000A (L-N),
12,000A (L-G), 12,000 (N-G)
• Rated single pulse transient energy
(10 x 1000ms, impulse) 320 joules
TESTING & CODE COMPLIANCE
•
•
•
•
UL Listed (File #E-13399
CSA Certified (File #LR-406)
NOM Certified (#057)
15 and 20 amp versions both meet new
UL Standard 1449-2nd ED. (1998)
• Backed by a Limited 10-Year Warranty
*COLOR
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
Basic Cat. Nos. denote Mahogany device, unless
indicated. Isolated Ground Receptacle is distinguished
by an orange triangle on its face. For other color
selections, add suffix to the catalog number as follows:
Ivory (-I), White (-W), Almond (-A), Red (-R), Gray (-G
or -GY), Blue (-B) and Orange (-O).
For more information regarding Surge
Protection Devices, refer to section R.
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A12
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
GFCI Personnel Protection Devices
SmartLock™ GFCI with Lockout Action
Meets or Exceeds new Underwriters Laboratories (UL) 2003
GFCI Requirements
■
Increased surge immunity
■
Increased corrosion resistance
■
Increased resistance to electrical noise
■
Diagnostic indication for miswiring
The SmartLock Protection Advantage
A standard GFCI can be RESET even if it's not providing ground
fault protection. Leviton's patent-pending SmartLock features a
RESET button that will not engage if protection has been compromised. With SmartLock, you will not have a live, unprotected
receptacle in an installation where GFCI protection is required.
Ideal for a Wide Range of GFCI Applications
Educational Facilities—Classrooms, bathrooms, laboratories,
dormitory bathrooms and kitchens
■ Airports—Public bathrooms, general use and maintenance
areas
■ Restaurants, Lodging and Retail Malls—Public bathrooms,
general use and maintenance areas
■ Residential—Kitchen, bathrooms, basements, outdoor receptacles and all locations where GFCI's are typically installed
■ Public Areas—In any facility where GFCI receptacles are
installed
■
SPECIFICATIONS & FEATURES
TESTING & CODE COMPLIANCE
• Meets or exceeds UL 2003 Requirements
• TEST and RESET functions work together so that a tripped GFCI cannot be
reset if GFCI circuit no longer provides ground fault protection
• RESET button is blocked if GFCI protection has been compromised, reducing
the possibility of end-users incorrectly assuming that a reset GFCI is providing
ground fault protection when it actually is not
• Cannot be reset if neutral is not present. GFCI can still be tripped with TEST
button under this condition
• Line-load diagnostic feature prevents GFCI from being reset and stops power
from being fed through to downstream devices. This alerts installer to a lineload reversal. NOTE: Power will still be available to GFCI receptacle face in this
condition and there will be no GFCI protection at the receptacle face
• The SmartLock GFCI with lockout action is designed and patented by Leviton
• Trip threshold meets or exceeds UL requirements for tripping time
• Impact-resistant thermoplastic cover and body
• Silver-alloy contacts
• Compatible with all Decora devices: available in selected Decora colors
•
•
•
•
UL Standard 943 Class A (GFCI) and 498 (Receptacles)
UL Listed (File # 48380)
NOM Certified (#057)
Backed by a Limited Two-Year Warranty
*COLOR
Basic Cat. Nos. shown above denote Brown color unless indicated. For other color selections,
add suffix to catalog number as follows: Ivory (-I), White (-W), Gray (-G or GY), Red (-R),
Black (-E), Almond (-A).
MATERIAL CHARACTERISTICS
Flammability: Rated V2
Operating Temperature: -30°F (-35°C) to 151°F (66°C)
Combination Switch/SmartLock™ GFCI Outlet
• Ideal for kitchens, bathrooms, modular kitchen units, bathroom cabinet fixtures,
lamp cabinet fixtures and applications where combination devices are used.
A13
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
GFCI Personnel
Protection Devices
Hospital Grade SmartLock™ GFCI Receptacles —
Back and Side Wired
15 AMP 125V at Receptacle, 20 AMP Feed-Through
DESCRIPTION
CAT. NO. COLOR*
NEMA CONFIG.
Basic Cat. No. Denotes Brown
Duplex with LED Indicator Light,
8598-HG
buttons match face color
Duplex with LED Indicator Light, buttons
8598-DIN
match face color. DIN-Rail mounting with
terminal wiring block. UL Recognized Component
I, W, G, R, A
G
5-15R
Black Only
W
20 AMP 125V at Receptacle and Feed-Through
DESCRIPTION
CAT. NO. COLOR*
Duplex with LED Indicator Light,
buttons match face color
8898-HG
8599-W
NEMA CONFIG.
Basic Cat. No. Denotes Brown
I, W, G, R, A
5-20R
G
W
Commercial Grade SmartLock™ GFCI Receptacles —
Back and Side Wired
15 AMP 125V at Receptacle, 20 AMP Feed-Through
DESCRIPTION
CAT. NO. COLOR*
NEMA CONFIG.
Basic Cat. No. Denotes Brown
8599
I, W, GY, E, A
8599-CP
I, W (No Brown)
8599-L
I, W (No Brown)
8598
8299-W
G
5-15R
W
I, W, A
8598-CPW White Only
2.70 (68.6 mm)
Duplex, No Indicator Light,
buttons match face color
Duplex, No Indicator Light, Black & Red buttons.
Contractor Pack
Duplex, No Indicator Light, Black & Red buttons.
With 4 1/2" leads
Duplex with LED Indicator Light,
buttons match face color
Duplex with LED Indicator Light,
Black & Red buttons. Contractor Pack
20 AMP 125V at Receptacle and Feed-Through
DESCRIPTION
CAT. NO. COLOR*
NEMA CONFIG.
Basic Cat. No. Denotes Brown
8899
I, W, GY, E, A
8898
I, W, A
5-20R
1.13
(28.6 mm)
1.53 (38.9 mm)
G
W
SmartLock GFCI RECEPTACLE
Cat No. 8599
Combination Switch/SmartLock™ GFCI Outlet — Side Wired
1.31
(33.4 mm)
8.3 AMP 1000 WATT @ 120V AC Switch Rating,
15 AMP 125V at Receptacle, 20 AMP Feed-Through
CAT. NO. COLOR*
NEMA CONFIG.
Basic Cat. No. Denotes Brown
Single-Pole Switch and SmartLock
GFCI-Protected Outlet, Black & Red buttons
8299
I, W, A
G
5-15R
W
4.21 (106.9 mm)
DESCRIPTION
2.70 (68.5 mm)
Duplex, No Indicator Light,
buttons match face color
Duplex with LED Indicator Light,
buttons match face color
Switch-Rated GFCI — Back and Side Wired
1.5 HP @ 120V AC Switch Rating, 20 AMP 125V Feed-Through
DESCRIPTION
CAT. NO. COLOR*
Blank Face, No Indicator Light,
buttons match face color
8590
1.70 (43.2 mm)
1.13
(28.6 mm)
1.53 (38.9 mm)
Basic Cat. No. Denotes Brown
All devices are UL Listed and CSA Certified.
I, W, A
COMBINATION SWITCH/
SmartLock GFCI OUTLET
Cat No. 8299
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A14
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Decora Lighting and Fan Speed Controls
Decora Lighting Controls combine
sophisticated designer styling with
state-of-the-art technology in a wide
selection of incandescent, magnetic
and electronic low-voltage and
fluorescent lighting control products.
Decora Fan speed Controls are
conveniently grouped with lighting
controls that share the same product
name and design features. Leviton
Decora Occupancy Sensors are also
available for convenience and energy
conservation.
Features and Benefits
■ Provide full-range dimming in single pole,
three-way, four-way and multi-location
switching schemes
■ Digital microprocessor state-of-the-art
circuitry
■ Styled for use with Decora wallplates and
can be ganged with other Decora devices
(Wallplates not included; must be ordered
separately)
■ All devices are UL Listed and CSA
Certified
■ Backed by a Limited Two-Year Warranty
“The Mural™ Collection” on pages A16–A19
Decora Lighting, Fan Speed & Occupancy Sensor Controls for Commercial & Residential Applications
Mural™ Scene Controller
Mural™
Decora-style
Controller sends
commands for up
to seven distinct
lighting scenes to
individual Mural
Scene-Capable
Dimmers.
True Touch™
TouchPoint™
Decora rocker-style
digital dimmer with
LED brightness level
indicators. Provides
single-pole and multilocation dimming.
Convenient colorchange kits available.
Decora-style digital
touch dimmer.
Provides fingertip fullrange single-pole and
multi-location dimming.
Convenient colorchange kits available.
Decora full-range
multi-location touch
dimmer responds to
where finger is
placed on pad. With
Preset switch, LED
locator, and LED
brightness indicators.
Cat. No. MDI06-1LW
Cat. No. TTI10-10W
Cat. No. TPI06-1LW
Cat. No. MN00C-1LW
IllumaTech™
A15
SureSlide™
Wall Switch Infrared
Occupancy Sensor
Fluid slide bar movement provides fine
adjustment of lighting
and fan speed levels.
Preset version have
large, easy-to-use
pushbutton switch.
Smooth-action linear
slide control for easy,
precise operation.
Slim design ideal for
multi-gang installations. Preset and
non-preset versions.
180° field of view with
coverage pattern of 2100
square feet. Advanced
self-adjusting technology
ensures maximum
performance.
Cat. No. IPI06-1LW
Cat. No. 6621-PW
Cat. No. ODS15-IDW
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Decora Lighting Controls
Mural™ Scene Capable Decora-Style Digital Dimmer
120V AC 60Hz Only Compatible with Scene Controller and Scene Enhancement Products —
See page A17.
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT*
Mural Scene Capable Incandescent/Magnetic
Low-Voltage Dimmer with LED Locator
and LED Brightness Display
MCM06-1LW
600W/VA
I, W, A, G, E
Mural Scene Capable Incandescent/Magnetic
Low-Voltage Dimmer with LED Locator
and LED Brightness Display
MCM10-1LW
1000W/VA
I, W, A, G, E
Mural Scene Capable Mark X Preset Dimmer
for 120V AC Advance Mark X™
Fluorescent Dimming Ballast
MCX10-1LW
1000VA
(750W)
I, W, A, G, E
Scene Controller: 7 Lighting-Scene Buttons
plus OFF and Group DIM and
BRIGHT Buttons
MN00C-1LW
No load rating,
use with Monet
or Mural Scene
Capable
Dimmers Only
I, W, A, G, E
MCM06-1LW in 80301-W
SPECIFICATIONS & FEATURES
Color Change Kits for Mural MC
Scene Capable Dimmer
DRKDD-1L
—
I, W, A, G, E
Color Change Kits with Text for
MN00C-1LW Scene Controller
DCKS7-00
—
I, W, A, G, E
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included with
each device. Mural Scene Capable Digital Controls are designed for use with Scene Controller and Scene Enhancement
products and are not compatible with the Multi-Remote unit.
All devices are UL Listed and CSA Certified.
Use Leviton Power Extenders to extend the load capacity of box-mounted dimmers. Leviton Power
Extenders are available for incandescent, magnetic low-voltage, electronic low-voltage, Advance Mark X™
fluorescent dimming ballasts or equivalents, and 0–10 VDC dimmable fluorescent ballasts such as Advance
Mark VII™, OSRAM Sylvania Quicktronic Helios or equivalent ballasts.
See Page O6 for more information on Leviton Power Extenders
CAUTION ON RETROFITS: When retrofitting Mark X dimming ballasts into fixtures that originally had Instant Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent damage to
the dimming ballast. Refer to the instructions provided with the ballast and the Leviton Mark X dimmer.
1.38 (35.1 mm)
2.38 (60.5 mm)
2.67 (67.8 mm)
0.21
(5.3 mm)
2.62 (66.6 mm)
4.13 (104.9 mm)
1.30 (33.0 mm)
• Responds to lighting level commands sent by
the Cat. No. MN00C-1LW Scene Controller.
Users can program the desired lighting level
for individual Mural Scene Dimmers in up to
seven distinct lighting scenes, which are
easily accessed by one or more Scene
Controllers
• Smooth ON/OFF and Dim/Bright Decora
rocker action provides ease of operation for
people of all ages and abilities
• Scene Controller also provides an OFF button
and two arrow-shaped buttons for group Dim
and Bright control.
• Local Dim/Bright adjustment on individual
scene dimmers will not effect programmed
scene lighting settings
• Compatible with Scene Enhancement
Products including Contact Closure Interface,
Infrared Hand-Held Remote and Infrared
Receiver, and one-way and two-way Signal
Repeater
• Streamlined, popular Decora styling
enhances any interior and adds a “family
look” when ganged with any Decora device
• Digital circuitry provides SOFT-ON/FADEOFF operation for an eye-pleasing effect and
prolonged lamp life
• Square green LED display alongside rocker
indicates selected brightness level
• Locator LED illuminates when lights are OFF
• Color change kits available in a wide range of
choices, making it easy and economical to
change decorating schemes
• Color change kits simplify inventory for distributors and contractors who can offer a complete range of colors without stocking a
different device for each one
• Minimum Brightness Adjustment sets comfortable minimum light level
• Protected memory and voltage compensation
maintain light levels after power outages and
during minor power fluctuations
• Built-in radio/TV interference filter
• ON/OFF AC air-gap switch completely disconnects power to unit for bulb changing or
removal from service
TESTING & CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Two-Year warranty
*COLOR
.06
(1.5 mm)
MURAL SCENE CAPABLE DIMMER
Cat. No. MCM10-1LW
Basic Cat. No. denotes White device. For other colors,
order Color Change Kits and add suffix as follows: Ivory
(-I), White (-W), Gray (-G), Black (-E), and Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A16
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Decora Lighting Controls
Scene Controller for Mural™ Scene Capable Lighting Controls
DESCRIPTION
CAT. NO.
RATING
COLOR*
Scene Controller:
7 Lighting-Scene Buttons plus
and OFF and Group DIM
BRIGHT Buttons
MN00C-1LW
No load rating,
use with 120V Monet/
Mural Scene
dimmers only
White, for
other colors
use Color
Change Kits
Color Change Kits with Text for
MN00C-1LW Scene Controller
DCKS7-00
—
I, W, A, G, E
Scene Enhancement Products — Compatible with Mural™
Scene Capable Lighting Controls
TESTING & CODE COMPLIANCE
• UL Listed (File #E-31373 – Cat. Nos. MN00C
and 177IR; File #E-66800 – Cat. Nos. 171001WY and 17100-2WY; File #E-600800 – Cat.
Nos. 177BI and 177OC)
• CSA Certified (File #LR-3413)
• Backed by a Limited Two-Year Warranty
RATING
COLOR*
Signal Repeater—Must be used if
controlling lighting on more
than one circuit. One-Way and
Two-Way versions available
17100-1WY,
17100-2WY
No load rating
(Non-color item)
Contact Closure Interface—Allows control
of Mural Scene Capable devices from
home theater and building control systems
via momentary contact inputs
177BI
No load rating
(Non-color item)
Occupancy Sensor Control Bridge—
Operates Scene devices in conjunction
with any Leviton Occupancy Sensor
177OC
No load rating
(Non-color item)
Infrared Receiver—Available with
Wall Mount and Ceiling Mount Bezels
177IR-IWA
No load rating
Supplied with Ivory,
White and Almond bezels
Hand-Held Infrared Remote Control—
with 4 Scene Buttons plus OFF
177RC
No load rating
Black
Note: A Repeater must be used on any installation that uses more than one circuit.
1.40
(35.5 mm)
SCENE 1 SCENE 2
SCENE 3 SCENE 4
2.69
(68.2 mm)
Scene Controller
• Sends commands for up to seven distinct
scenes to individual Mural Scene Capable
Dimmers
• Multiple Scene Controllers can be used for
multi-point access to scenes.
• Provides OFF button and two arrow-shaped
buttons for group Dim and Bright control
• Local Dim/Bright adjustment on individual
scene dimmers will not effect programmed
scene settings.
• Green LED display for each scene button indicates selected scene
• Fast, easy scene programming: Press scene
button on MN00C, adjust individual level on
Mural Scene Capable dimmer, press program
button on dimmer
• Controls up to 20 scene dimmers per circuit
• Streamlined, popular Decora styling enhances
any interior and adds a “family look” when
ganged with any Decora device
• Works with Monet, Decora Plus or any standard Decora wallplate
• Color change kits available in ivory, white,
almond, gray, and black allow fast color
changeover and simplify stocking inventory
• Internal MOV for surge protection
• Customized lettering for each scene button
available (maximum of 8 characters and
spaces) — see your Leviton representative for
ordering information
Scene Enhancement Products
• Two-Way Repeater provides scene control
communication link between branch circuits.
One-Way Repeater allows the creation of
separate scene control zones
CAT. NO.
3.28 (83.3 mm)
SPECIFICATIONS & FEATURES
DESCRIPTION
4.40 (112.0 mm)
MN00C-1LW in 80301-W
SCENE 5 SCENE 6
SCENE 7
OFF
*COLOR
Basic Cat. No. denotes White device. For other colors,
order Color Change Kits and add suffix as follows: Ivory
(-I), White (-W), Gray (-G), Black (-E), and Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
1.76
(45.0 mm)
1.60
(40.6 mm)
MURAL SCENE CONTROLLER
Cat. No. MN00C-1LW
A17
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Decora Lighting Controls
Commercial Grade
Mural™ L/S (Level Set) Decora-Style Preset Digital Dimmer
120V AC 60Hz Only All Mural™ L/S dimmers provide single-pole (1 location) and 3-way
(multi-location) control when used with Multi-Remote unit.
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT*
Mural L/S Incandescent LED Locator and
Brightness Display
MLI06-1LW
600W
I, W, A, G, E, B
Mural L/S Incandescent LED Locator and
Brightness Display
MLI10-1LW
1000W
I, W, A, G, E, B
Mural L/S Magnetic Low-Voltage
LED locator and Brightness Display
MLM06-1LW
600VA
(450W)
I, W, A, G, E, B
Mural L/S Magnetic Low-Voltage
LED locator and Brightness Display
MLM10-1LW
1000VA
(750W)
I, W, A, G, E, B
Mural L/S Electronic Low-Voltage LED
Locator and Brightness Display
MLE03-1LW
350VA (260W)
I, W, A, G, E, B
Mural L/S for Advance Mark
Fluorescent Dimming Ballast
MLX06-1LW
600VA (450W)
I, W, A, G, E, B
Mural L/S Quiet Fan Speed Control
LED Locator and Brightness Display
MLF01-1LW
1.5A
I, W, A, G, E, B
Mural L/S Incandescent LED Locator
(no brightness display)
MRI06-1LW
600W
I, W, A, G, E
Mural L/S Incandescent LED Locator
(no brightness display)
MRI10-1LW
1000W
I, W, A, G, E
Mural L/S Magnetic Low-Voltage
LED Locator (no brightness display)
MRM10-1LW
1000VA
(750W)
I, W, A, G, E
Multi-Remote Unit for
Multi-Location Dimming
(no LED locator or display)
MS00R-10W
No load
rating
I, W, A, G, E
Multi-Remote Unit for Electronic Low-Voltage
Multi-Location Dimming
(no LED locator or display)
MSE0R-10W
No load
rating
I, W, A, G, E
Color Change Kits for Mural L/S
(ML versions)
DLKDD-1L
—
I, W, A, G, E, B
Color Change Kits for Multi-Remote Units
(no LED locator or display)
DRK0R-00
—
I, W, A, G, E
Color Change Kit for Mural L/S (MR versions)
MRK0D-0L
No load rating
I, W, A, G, E
X™
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate
neutral to each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions
included with each device. They can be used in conventional 3-way and 4-way wiring circuits only when the
Control is properly connected to the load as indicated by the device’s wiring instructions.
CAUTION ON RETROFITS: When retrofitting Mark X dimming ballasts into fixtures that originally had Instant Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent damage to
the dimming ballast. Refer to the instructions provided with the ballast and the Leviton Mark X dimmer.
2.38 (60.5 mm)
2.67 (67.9 mm)
1.38
(35.1 mm)
2.62 (166.6 mm)
4.13 (104.9 mm)
0.21
(5.3 mm)
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark X™ fluorescent dimming
ballasts or equivalents, and 0–10 VDC
dimmable fluorescent ballasts such as
Advance Mark VII™, OSRAM Sylvania
Quicktronic Helios or equivalent ballasts.
See Page O6 for more information on
Leviton Power Extenders
SPECIFICATIONS & FEATURES
All devices are UL Listed and CSA Certified.
1.30
(33.0 mm)
MLI06-1LW in 80301-W
• Smooth Decora rocker-action for Preset
ON/OFF switching with built-in arrow-shaped
rocker for DIM/BRIGHT control
• Arrow rocker allows user to set brightness level
when lights are off
• Second tap on top half of rocker for full bright.
Gently double tap bottom half of rocker for
fast OFF
• Easy to operate for people of all ages and
abilities
• Provides single-pole (one-location) and multilocation full range dimming when used with
Multi-Remote units
• Streamlined, popular Decora styling enhances
any interior and adds a “family look” when
ganged with any Decora device
• Digital circuitry provides SOFT-ON/FADE-OFF
operation for an eye-pleasing effect and prolonged lamp life
• Square green LED display alongside rocker
indicates selected brightness level on
ML models
• Locator LED illuminates when lights are OFF
• Color change kits available in a wide range of
choices, making it easy and economical to
change decorating schemes
• Color change kits simplify inventory for distributors and contractors who can offer a complete
range of colors without stocking a different
device for each one
• Minimum brightness adjustment sets comfortable minimum light level
• Power failure recovery assures retention of
lighting levels during long-term power
interruptions.
• Built-in radio/TV interference filter
• ON/OFF AC air-gap switch completely disconnects power to unit for bulb changing or
removal from service
TESTING & CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Two-Year warranty
*COLOR
Basic Cat. No. denotes White device. For other colors,
order Color Change Kits and add suffix as follows: Ivory
(-I), White (-W), Gray (-G), Black (-E), Almond (-A) and
Brown (-B).
ALL MURAL L/S (LEVEL SET) DIMMERS
ML Model Shown
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A18
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Decora Lighting Controls
Mural™ Decora-Style Digital Dimmer 120V AC 60Hz Only All Mural™ dimmers
provide single-pole (1 location) and 3-way (multi-location) control when used with Multi-Remote unit.
MDI10-1LW in 80301-W
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark X™ fluorescent dimming
ballasts or equivalents, and 0–10 VDC
dimmable fluorescent ballasts such as
Advance Mark VII™, OSRAM Sylvania
Quicktronic Helios or equivalent ballasts.
See Page O6 for more information on
Leviton Power Extenders
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT*
Mural Incandescent LED Locator
and Brightness Display
MDI06-1LW
600W
I, W, A, G, E
Mural Incandescent LED Locator
and Brightness Display
MDI10-1LW
1000W
I, W, A, G, E
Mural Magnetic Low-Voltage LED Locator
and Brightness Display
MDM06-1LW
600VA (450W)
I, W, A, G, E
Mural Magnetic Low-Voltage LED Locator
and Brightness Display
MDM10-1LW
1000VA (750W) I, W, A, G, E
Mural Electronic Low-Voltage LED Locator
and Brightness Display
MDE03-1LW
350VA (260W)
I, W, A, G, E
Mural Quiet Fan Speed Control LED Locator
and Brightness Display
MDF01-1LW
1.5A
I, W, A, G, E
Mural Incandescent LED Locator
(no Brightness Display)
MSI06-1LW
600W
I, W, A, G, E
Mural Incandescent LED Locator
(no Brightness Display)
MSI10-1LW
1000W
I, W, A, G, E
Mural Magnetic Low-Voltage LED Locator
(no Brightness Display)
MSM10-1LW
1000VA (750W) I, W, A, G, E
Multi-Remote Unit for Multi-Location Dimming
(no LED locator or display)
MS00R-10W
No load rating
I, W, A, G, E
Multi-Remote Unit for Electronic Low-Voltage
MSE0R-10W
Multi-Location Dimming (no LED locator or display)
No load rating
I, W, A, G, E
All devices are UL Listed and CSA Certified.
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Two-Year Warranty
*COLOR
Basic Cat. No. denotes White device. For other colors,
order Color Change Kits and add suffix as follows: Ivory
(-I), White (-W), Gray (-G), Black (-E), and Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
DESCRIPTION
CAT. NO.
RATING
COLOR*
Mural Incandescent Dimmer
MDI10-2LW
1000W
I, W, A, G, E
Mural Magnetic Low-Voltage Dimmer
MDM10-2LW
1000VA
(750W)
I, W, A, G, E
Multi-Remote unit for Multi-Location
Dimming (no LED locator or display)
MS00R-20W
No load rating
—for use with
Mural 220V
dimmers
I, W, A, G, E
Note: 220V devices are not UL Listed or CSA Certified.
Color Change Kits for Mural™ Dimmers (120V and 220V)
DESCRIPTION
CAT. NO.
COLOR CHANGE KIT*
Mural MD with LED Locator and
Brightness Display
DRKDD-1L
I, W, A, G, E
Mural MS with LED Locator
(no Brightness Display)
DRK0D-1L
I, W, A, G, E
Multi-Remote Units
(no LED Locator or Display)
DRK0R-00
I, W, A, G, E
All devices are UL Listed and CSA Certified.
1.38 (35.1 mm)
2.38 (60.5 mm)
Digital Lighting and Fan Speed Controls are
polarity sensitive devices. Always follow
the wiring instructions included with each
device. They can be used in conventional
3-way and 4-way wiring circuits only when
the Control is properly connected to the
load as indicated by the device’s wiring
instructions.
1.30 (33.0 mm)
0.21
(5.3 mm)
2.67 (67.8 mm)
TESTING & CODE COMPLIANCE
Mural™ Decora-Style Digital Dimmer 220V AC 50Hz AC Only
2.62 (66.6 mm)
• Provides single-pole (one-location) and
multi-location full range dimming when used
with MS00R remote unit
• Streamlined popular Decora styling
enhances any interior and adds a family look
when ganged with other Decora devices
• Smooth ON/OFF and DIM/BRIGHT Decora
rocker action provides ease of operation for
people of all ages and abilities
• Digital circuitry provides Soft-ON/Fade-OFF
switching for and eye-pleasing effect and
extended lamp life
• Compatible with Decora screwless and
Decora standard designer wallplates
• Locator LED illuminated when lights
are OFF
• Color change kits available in a wide range
of choices, making it easy and economical to
change decorating schemes
• Color change kits simplify inventory for distributors and contractors who can offer a
complete range of colors without stocking a
different device for each one
• Protected memory and voltage compensation maintain light levels after short-term
power outages and during minor power
fluctuations
• Square green LED display alongside rocker
indicates selected brightness level on
MD models
• Built-in radio/TV interference filter
• ON/OFF AC air gap switch completely
disconnects power to unit for bulb changing
or removal from service
4.13 (104.9 mm)
SPECIFICATIONS & FEATURES
.06
(1.5 mm)
MURAL DECORA-STYLE DIMMER
Cat. No. MDI10-1LW
A19
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Decora Lighting Controls
TouchPoint™ Decora Preset Digital Touch-Pad Dimmer
120V AC 60Hz Only All TouchPoint™ dimmers provide single-pole (1 location) and 3-way
(multi-location) control when used with Multi-Remote unit.
DESCRIPTION
CAT. NO.
RATING
COLOR*
TouchPoint Incandescent
TPI06-1L
600W
I, W, A, G, E
TouchPoint Incandescent
TPI10-1L
1000W
I, W, A, G, E
TouchPoint Magnetic Low-Voltage
TPM06-1L
600VA (450W)
I, W, A, G, E
TouchPoint Magnetic Low-Voltage
TPM10-1L
1000VA (750W)
I, W, A, G, E
X™
TouchPoint Advance Mark
Fluorescent Dimming Ballast
TPX06-1L
600VA (450W)
I, W, A
TouchPoint Advance Mark X™
Fluorescent Dimming Ballast
TPX10-1L
1000VA (750W)
I, W, A
Multi-Remote Unit for Multi-Location Dimming
(no LED locator or display)
MS00R-10W
No load
rating
White, for
other colors
use Color
Change Kits
Color Change Kits for Multi-Remote Units
(no LED locator or display)
DRK0R-00
—
I, W, A, G, E
All devices are UL Listed and CSA Certified.
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate
neutral to each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions
included with each device. They can be used in conventional 3-way and 4-way wiring circuits only when the
Control is properly connected to the load as indicated by the device's wiring instructions.
TPI10-1LW in 80301-W
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark X™ fluorescent dimming
ballasts or equivalents, and 0–10 VDC
dimmable fluorescent ballasts such as
Advance Mark VII™, OSRAM Sylvania
Quicktronic Helios or equivalent ballasts.
See Page O6 for more information on
Leviton Power Extenders
SPECIFICATIONS & FEATURES
CAUTION ON RETROFITS: When retrofitting Mark X dimming ballasts into fixtures that originally had Instant Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent damage to
the dimming ballast. Refer to the instructions provided with the ballast and the Leviton Mark X dimmer.
2.38 (60.5 mm)
1.38 (35.1 mm)
2.67 (67.8mm)
0.30
(7.6 mm)
2.62 (66.6mm)
4.13 (104.9mm)
1.30 (33.0 mm)
• New advanced digital touch pad technology
provides full range dimming by responding to
where your finger is placed on the pad
• Provides single-pole (one-location) and
multi-location full range dimming when used
with MS00R remote unit
• Attractive Decora styling blends with any
interior
• Digital circuitry provides Soft-ON/Fade-OFF
switching for and eye-pleasing effect and
extended lamp life
• Compatible with Decora screwless and
Decora standard designer wallplates
• Locator LED is illuminated when lights are
OFF (no LED on Remote Unit)
• Easy-to-read LED display alongside touch
pad indicates selected brightness level
• Minimum Brightness Adjustment sets
comfortable minimum light level
• Protected memory maintains light levels
after power outages and during minor power
fluctuations
• Built-in radio/TV interference filter
TESTING & CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Two-Year Warranty
*COLOR
Add suffix to catalog number as follows for other colors:
Ivory (-I), White (-W), Gray (-G), Black (-E), and Almond
(-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
0.06
(1.5 mm)
TOUCHPOINT DECORA PRESET DIGITAL TOUCH DIMMER
Cat. No. TPI10-1LW
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A20
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Decora Lighting Controls
True Touch™ Decora Digital Touch Dimmer 120V AC 60Hz Only
All True Touch™ dimmers provide single-pole (one location) and 3-way (multi-location) control when
used with True Touch Remote, except Cat. No. 6606.
TTI10-10W in 80301-W
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT*
Incandescent Touch Dimmer, Single-Pole Only
6606-W
600W
I, W, AA, AI, AW, AGY, AE
True Touch Incandescent
TTI06-10W
600W
I, W, A, WS, GI, GY, E, BG
True Touch Incandescent
TTI10-10W
1000W
I, W, A, WS, GI, GY, E, BG
True Touch Magnetic Low-Voltage
TTM10-10W
1000VA (750W) I, W, A, WS, GI, GY, E, BG
True Touch Remote Unit (no LED)
TT00R-10W
No load rating
I, W, A, WS, GI, GY, E, BG
True Touch Dimmer Color Change Kit
TTKIT
—
I, W, A, WS, GI, GY, E, BG
True Touch Remote Unit Color Change Kit
TTKTR
—
I, W, A, WS, GI, GY, E, BG
All devices are UL Listed and CSA Certified.
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark X™ fluorescent dimming
ballasts or equivalents, and 0–10 VDC
dimmable fluorescent ballasts such as
Advance Mark VII™, OSRAM Sylvania
Quicktronic Helios or equivalent ballasts.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions
included with each device. They can be used in conventional 3-way and 4-way wiring circuits only when the
Control is properly connected to the load as indicated by the device’s wiring instructions.
See Page O6 for more information on
Leviton Power Extenders
SPECIFICATIONS & FEATURES
TESTING & CODE COMPLIANCE
• UL Listed (File #E-31373
• CSA Certified (File #LR-3413)
• Backed by a Limited Two-Year Warranty
0.21
(5.3 mm)
1.38
(35.1 mm)
2.62 (66.6mm)
1.30 (33.0 mm)
2.67 (67.8mm)
2.38 (60.5 mm)
4.13 (104.9 mm)
• Provides fingertip ease of use and precise
adjustment of lighting levels. Simple one-touch
for ON at Preset level, or again for OFF. Touch
and hold for BRIGHT/DIM lighting control
• Provides single-pole (one-location) and multilocation full range dimming when used with
TT00R remote unit
• Cat. No. 6606 Decora Touch Dimmer is
available for single-pole applications only (no
soft-ON/Fade-OFF or multi-location features)
• Attractive Decora styling blends with any
interior
• Digital circuitry provides Soft-ON/Fade-OFF
switching for and eye-pleasing effect and
extended lamp life
• Compatible with Decora screwless and Decora
standard designer wallplates
• Locator LED is illuminated when lights are
OFF (no LED on Remote Unit)
• Color change kits offered in a wide range of
colors, making it easy and economical to
change decorating schemes
• Minimum Brightness Adjustment sets comfortable minimum light level
• Protected memory maintains light levels after
short-term power outages and during minor
power fluctuations
• Built-in radio/TV interference filter
• ON/OFF AC air gap switch completely
disconnects power to unit for bulb changing or
removal from service
0.06
(1.5 mm)
TRUE TOUCH DECORA DIGITAL TOUCH DIMMER
Cat. No. TTI10-10W
*COLOR
Cat. No. 6606 available in Brown/Gold (no dash),
Ivory/Gold (-I), White/Silver (-W), Almond (-AA),
Ivory (-AI), White (-AW), Gray (-AGY) and Black (-AE).
For all other True Touch dimmers, basic Cat. No.
denotes White device. For other colors, order Color
Change Kits and add suffix as follows: Ivory (-I),
White (-W), Almond (-A), Gray (-GY), Black (-E), White
frame/Silver touch plate (-WS), Ivory frame/Gold touch
plate (-GI), and Brown frame/Gold touch plate (-BG).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
A21
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Decora Lighting Controls
Commercial Grade
IllumaTech™ Preset Slide Controls —
Single Pole and 3-Way, with LED Locator All IllumaTech Preset Dimmers provide
single-pole (one location) and 3-way (multi-location) control when used with a 3-way switch.
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT*
IllumaTech Incandescent
IPI06-1LW
600W
120V AC 60 Hz
I, W, A, G, E, B
IllumaTech Incandescent
(no LED locator)
IPI06-10W
600W
120VAC 60 Hz
I, W, A, G, E, B
IllumaTech Incandescent
IPI10-1LW
1000W
120VAC 60 Hz
I, W, A, G, E, B
IllumaTech Electronic Low-Voltage
IPE04-1LW
400VA (300W)
120V AC 60 Hz
I, W, A, G, E, B
IllumaTech Magnetic Low-Voltage
IPM06-1LW
600VA (450W)
120V AC 60 Hz
I, W, A, G, E, B
IllumaTech Magnetic Low-Voltage
IPM10-1LW
1000VA (750W)
120V AC 60 Hz
I, W, A, G, E, B
IllumaTech Advance Mark VII™
Fluorescent Dimming Ballast
IP710-DLW
1200VA (900W)
@ 120V AC 60Hz, 1500VA
(1125W) @ 277V AC 60Hz
I, W, A, G, E, B
IllumaTech Advance Mark X™
Fluorescent Dimming Ballast
IPX06-1LW
600VA (450W)
120V AC 60 Hz
I, W, A, G, E, B
IllumaTech Advance Mark X™
Fluorescent Dimming Ballast
IPX10-1LW
1000VA (750W)
120V AC 60 Hz
I, W, A, G, E, B
IllumaTech Advance Mark X™
Fluorescent Dimming Ballast
IPX06-7LW
600VA (450W)
277V AC 60Hz
I, W, A, G, E, B
IllumaTech Advance Mark X™
Fluorescent Dimming Ballast
IPX12-7LW
1200VA (900W)
277V AC
I, W, A, G, E, B
See Page O6 for more information on
Leviton Power Extenders
IllumaTech Quiet Fan Speed Control
IPF01-1LW
1.5 Amps
120V AC 60 Hz
I, W, A, G, E, B
SPECIFICATIONS & FEATURES
IllumaTech Fan Speed Control
IPF05-1LW
5 Amps
120V AC 60 Hz
I, W, A, G, E, B
IllumaTech Color Change Kit
IPKIT-00W
—
I, W, A, G, E, B
IllumaTech Color Change Kit
for Quiet Fan Speed Control
IPQFK-00W
—
I, W, A, G, E, B
IllumaTech™ Preset Slide Controls—
Single Pole and 3-Way, with LED Locator 220V AC 50Hz Only
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT*
IllumaTech Incandescent
IPI06-2LW
600W
W, I, A, G, E, B
IllumaTech Incandescent
IPI10-2LW
1000W
W, I, A, G, E, B
IllumaTech Magnetic Low-Voltage
IPM06-2LW
600VA (450W)
W, I, A, G, E, B
IllumaTech Quiet Fan Speed Control
IPF01-2LW
1.5 Amps
W, I, A, G, E, B
Note: 220V devices are not UL Listed or CSA Certified
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate
neutral to each phase. Consult Leviton Techline if problems persist.
CAUTION ON RETROFITS: When retrofitting Mark X dimming ballasts into fixtures that originally had Instant Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent damage to
the dimming ballast. Refer to the instructions provided with the ballast and the Leviton Mark X dimmer.
IPI06-1LW in 80301-W
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark X™ fluorescent dimming
ballasts or equivalents, and 0–10 VDC
dimmable fluorescent ballasts such as
Advance Mark VII™, OSRAM Sylvania
Quicktronic Helios or equivalent ballasts.
• Fluid slide movement allows fine adjustment of light
level with minimum effort
• Captured, wrap-around slide bar stays in place and
cannot fall off during use
• Preset versions provide easy-to-use pushbutton
switch with locator LED conveniently positioned on
it, making the pushbutton easier to find in the dark
• Preset versions provide single-pole (one-location)
and multi-location lighting control when used with a
3-way switch
• Attractive Decora styling blends with any interior
• Compatible with Decora screwless and Decora
standard designer wallplates
• Locator LED is illuminated when lights are OFF.
LED is positioned in the same location on both
Preset and Non-Preset Preset versions, giving a
true “family look” to IllumaTech
• Power failure recovery ensures retention of last
setting before power interruption
• Built-in radio/TV interference filter
• Quiet 1.5 Amp Fan Speed Controls are ideal for
libraries, study rooms and any area where ceiling
fan noise could become distracting. Full range
5-amp fan speed controls also available
• Color change kits feature a self-aligning mechanism
that automatically connects it to internal slider
• Snap-On Color Change Kits allow color changes
on any device, eliminating the need to stock a
separate device for every available color
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Two-Year Warranty
2.68 (68.1 mm)
3.28 (83.3 mm)
4.15 (105.4 mm)
TESTING & CODE COMPLIANCE
*COLOR
Basic Cat. No. denotes White device. For other colors,
order Color Change Kits and add suffix as follows: Ivory
(-I), White (-W), Gray (-G), Black (-E), Almond (-A), and
Brown (-B).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
2.12 (53.8 mm)
1.41
(35.8 mm)
0.38 (9.7 mm)
ILLUMATECH PRESET SLIDE DIMMER
Cat. No. IPI06-1LW
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A22
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Decora Lighting Controls
IllumaTech™ Rotary Controls 120V AC 60Hz Only
All IllumaTech Rotary controls combine the ease of a traditional rotary dial with the contemporary look
of Leviton Decora®.
RPI06-1LW in 80301-W
DESCRIPTION
CAT. NO.
RATING
COLOR*
IllumaTech Rotary Incandescent, Single-Pole
and 3-way, Illuminated
RPI06-1L
600W
I, W, A
IllumaTech Rotary Incandescent, Single-Pole
and 3-way, Non-Illuminated
RPI06-10
600W
I, W, A
IllumaTech Rotary Quiet Fan Speed Control,
Single-Pole, Non-Illuminated
RTF01-10
1.5 Amp
I, W, A
IllumaTech Rotary Dual Quiet Fan Speed
Control and Fixture Dimmer, Single-Pole,
Non-Illuminated
RTD01-10
1.5 Amp Fan Control/
300W Dimmer
I, W, A
All devices are UL Listed and CSA Certified.
Use Leviton Power Extenders to extend the load capacity of box-mounted dimmers. Leviton Power
Extenders are available for incandescent, magnetic low-voltage, electronic low-voltage, Advance Mark X™
fluorescent dimming ballasts or equivalents, and 0–10 VDC dimmable fluorescent ballasts such as Advance
Mark VII™, OSRAM Sylvania Quicktronic Helios or equivalent ballasts.
See Page O6 for more information on Leviton Power Extenders
1.30
(33.12 mm)
0.75
(19.05 mm)
1.73
(44.04 mm)
4.12
(104.64 mm)
• Combines traditional rotary dial with contemporary Decora styling
• Dimmers provide single-pole (one-location) or
multi-location (3-way) control when used with a
3-way switch
• Dimmers available in illuminated and non-illuminated versions
• Quiet 1.5 Amp Fan Speed Controls are perfect
for libraries, study rooms and any area where
ceiling fan noise could become distracting
• Dual fan speed control and dimmer is ideal for
ceiling fans with built-in light fixtures
• Attractive Decora styling coordinates perfectly
with Leviton’s complete line of Decora wiring
devices
• Compatible with Decora Plus screwless and
Decora standard designer wallplates
• Built-in radio/TV interference filter
• Slim, compact housing fits easily into a standard wallbox and is suitable for multi-gang
installations
3.28
(83.34 mm)
SPECIFICATIONS & FEATURES
2.23
(56.64 mm)
RTD01-10W in 80301-W
ILLUMATECH ROTARY INCANDESCENT
Cat. No. RPI06-1L
1.30
(33.12 mm)
0.75
(19.05 mm)
1.73
(44.04 mm)
X
MA
HI
ME
D
LO
Add suffix to catalog number as follows to indicate color
selection: Ivory (-I), White (-W) and Almond (-A).
4.12
(104.64 mm)
*COLOR
OF
F
UL Listed (File #E-31373)
CSA Certified (File #LR-3413)
NOM Certified (File #057)
Backed by a Limited Two-Year Warranty
3.28
(83.34 mm)
•
•
•
•
2.67
(67.81 mm)
TESTING & CODE COMPLIANCE
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
ILLUMATECH ROTARY DUAL QUIET FAN SPEED CONTROL/FIXTURE DIMMER
Cat. No. RTD01-10
A23
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Decora Lighting Controls
Commercial Grade
IllumaTech™ Non-Preset Slide Dimmers — Single-Pole Only,
with LED Locator 120V AC 60 Hz Only
DESCRIPTION
CAT. NO.
RATING
COLOR CHANGE KIT*
IllumaTech Incandescent
INI06-1LW
600W
I, W, A, G, E, B
IllumaTech Incandescent (no LED locator)
INI06-10W
600W
I, W, A, G, E, B
IllumaTech Incandescent
INI10-1LW
1000W
I, W, A, G, E, B
IllumaTech Magnetic Low-Voltage
INM06-1LW
600VA (450W)
I, W, A, G, E, B
IllumaTech Magnetic Low-Voltage
INM10-1LW
1000VA (750W) I, W, A, G, E, B
IllumaTech Quiet Fan Speed Control
INF01-1LW
1.5 Amps
I, W, A, G, E, B
IllumaTech Fan Speed Control
INF05-1LW
5 Amps
I, W, A, G, E, B
IllumaTech Color Change Kit
INKIT-00W
—
I, W, A, G, E, B
IllumaTech Color Change Kit
for Quiet Fan Speed Control
INQFK-00W
—
I, W, A, G, E, B
All devices are UL Listed and CSA Certified.
INI06-1LW in 80301-W
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark X™ fluorescent dimming
ballasts or equivalents, and 0–10 VDC
dimmable fluorescent ballasts such as
Advance Mark VII™, OSRAM Sylvania
Quicktronic Helios or equivalent ballasts.
See Page O6 for more information on
Leviton Power Extenders
SPECIFICATIONS & FEATURES
1.26
2.12 (53.8 mm)
2.68 (68.1 mm)
3.28 (83.3 mm)
4.15 (105.4 mm)
(32.0 mm)
1.11
(28.2 mm)
ILLUMATECH NON-PRESET SLIDE DIMMER
CAT. NO. INI06-1LW
0.39
(9.9 mm)
• Fluid slide movement allows fine adjustment of light
level with minimum effort
• Captured, wrap-around slide bar stays in place and
cannot fall off during use
• Attractive Decora styling blends with any interior
• Compatible with Decora screwless and Decora
standard designer wallplates
• Locator LED is illuminated when lights are OFF.
LED is positioned in the same location on both
Preset and Non-Preset Preset versions, giving a
true “family look” to IllumaTech
• Power failure recovery ensures retention of last
setting before power interruption
• Built-in radio/TV interference filter
• Quiet 1.5 Amp Fan Speed Controls are ideal for
libraries, study rooms and any area where ceiling
fan noise could become distracting. Full range
5-amp fan speed controls also available
• Color change kits feature a self-aligning mechanism
that automatically connects it to internal slider
• Snap-On Color Change Kits allow color changes
on any device, eliminating the need to stock a
separate device for every available color
TESTING & CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Two-Year Warranty
*COLOR
Basic Cat. No. denotes White device. For other colors,
order Color Change Kits and add suffix as follows: Ivory
(-I), White (-W), Gray (-G), Black (-E), Almond (-A), and
Brown (-B).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A24
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Decora Lighting Controls
SureSlide™ Decora Full Range Slide Dimmers 120V 60Hz AC Only
Incandescent
DESCRIPTION
CAT. NO.
RATING
COLOR*
SureSlide Single-Pole
6621
600W
I, W, GY, A
SureSlide Single-Pole with Preset ON/OFF Switch
6621-P
600W
I, W, GY, E, A
SureSlide Single-Pole Illuminated
6631
600W
I, W
SureSlide Single-Pole Illuminated,
with Preset ON/OFF Switch
6631-P
600W
I, W
SureSlide 3-Way with Preset ON/OFF Switch
6623-P
600W
I, W, GY, E, A
SureSlide 3-Way Illuminated,
with Preset ON/OFF Switch
6633-P
600W
I, W
SureSlide Dual Slide Dimmer—(2) Single-Pole
Loads, Incandescent or Magnetic Low-Voltage
6628
300W or 300VA
per circuit;
600W/600VA Total
I, W, A, GY (No Brown)
Basic Cat. No. Denotes Brown
6621-PW
Magnetic Low-Voltage
SureSlide Single-Pole with Preset ON/OFF Switch
6611-P
600VA (450W)
I, W, GY, E, A
SureSlide 3-Way with Preset ON/OFF Switch
6613-P
600VA (450W)
I, W, GY, E, A
Advance Mark X / Philips Dimmable Earthlight®
SureSlide Single-Pole
6668-1
500W 120V Mark X
350W 120V
Philips dimmable
Earthlight
I, W (No Brown)
SureSlide Single-Pole
6627
5 Amps
I, W
SureSlide Single-Pole with Preset ON/OFF
6627-P
5 Amps
I, W, A, G, E
SureSlide 3-Way with Preset ON/OFF
6637-P
5 Amps
I, W, A, G, E
Full-Range Fan Speed Controls
6621-W
SPECIFICATIONS & FEATURES
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Two-Year Warranty
*COLOR
Basic Cat. No. denotes Brown unless otherwise stated.
Add suffix to catalog number as follows for other colors:
Ivory (-I), White (-W), Gray (-GY or G), Black (-E), and
Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
A25
Brown Not Available
SureSlide Single-Pole Quiet Step
6629-P
1.5 Amps
SureSlide 3-way Quiet Step
6629-3
1.5 Amps
I, W, A, GY
I, W, A, GY
SureSlide Dual Quiet Fan Speed
and Fixture Dimmer
6630
1.5A Fan/
300W Fixture
I, W, A, GY
Trimatron Decora-Style Quiet Fan Speed Control
6639
1.5 Amps
I, W, A
All devices are UL Listed and CSA Certified.
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark X™ fluorescent dimming
ballasts or equivalents, and 0–10 VDC
dimmable fluorescent ballasts such as
Advance Mark VII™, OSRAM Sylvania
Quicktronic Helios or equivalent ballasts.
See Page O6 for more information on
Leviton Power Extenders
CAUTION ON RETROFITS: When retrofitting Mark X dimming ballasts into fixtures
that originally had Instant Start ballasts, the
sockets MUST be replaced with Rapid Start
sockets to allow proper dimmer operation and
prevent damage to the dimming ballast. Refer
to the instructions provided with the ballast
and the Leviton Mark X dimmer.
1.73
(43.9 mm)
1.30
(33.0 mm)
1.53
(38.9 mm)
1.34
(34.0 mm)
2.63 (66.8 mm)
TESTING & CODE COMPLIANCE
Quiet Step Fan Speed Controls
4.13 (104.9 mm)
• All SureSlide devices have a permanently
mounted smooth-action integrated linear slide
control for easy, precise operation
• SureSlide features a slim, compact housing
that fits easily into a standard wallbox and is
suitable for multi-gang installations
• Preset versions provide single-pole (onelocation) and multi-location lighting control
when used with a 3-way switch
• SureSlide’s attractive Decora styling coordinates perfectly with Leviton’s complete line of
Decora wiring devices
• Compatible with Decora screwless and
Decora standard designer wallplates
• Built-in radio/TV interference filter
• Quiet 1.5 Amp Fan Speed Controls are ideal
for libraries, study rooms and any area where
ceiling fan noise could become distracting.
Full range 5-amp fan speed controls also
available
• SureSlide Cat. No. 6668 is specially designed
to work with the Philips Dimmable Earthlight®
• Preset versions provide a low-end trim adjustment for precise lamp brightness and fan
speed at the low-end settings
For IllumaTech Fan Speed Controls and Quiet
Fan Speed Controls, see pages A22–A24.
SURESLIDE PRESET DIMMER
Cat. No. 6621-P
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Decora Lighting Controls
Residential Grade
Decora Four-Level Step Dimmer
500 WATTS 120V AC 60Hz Incandescent Only
DESCRIPTION
CAT. NO.
COLOR*
Four-Level Step Dimmer
6161
I, W, A
DESCRIPTION
CAT. NO.
COLOR*
3-Position Emergency Flasher Rocker Switch
911
I, W, A
Decora 911 Flasher switch
500 WATTS 120V
6161-W
911-W
2.38 (60.5 mm)
1.53 (38.9 mm)
0.21 (5.3 mm)
1.30
(33.0 mm)
SPECIFICATIONS & FEATURES
2.63 (66.8 mm)
4.13 (104.9 mm)
.06 (1.5 mm)
Four-Level Step Dimmer
• Eliminates guesswork — user selects one of
four preset lighting levels (25%, 50%, 75%,
100%)
• Easily installs in place of single-pole switch
• LED indicates selected level of brightness
• Sleek designer styling; can be ganged with
other Decora devices
911 Switch
• 911 replaces standard single-pole switch
and alerts neighbors and helps emergency
personnel locate a house quickly
• 911 Switch has standard ON/OFF operations
plus a special illuminated “FLASH” position
that causes controlled lighting to flash ON
and OFF at one-second intervals
TESTING & CODE COMPLIANCE
FOUR-LEVEL STEP DIMMER
Cat. No. 6161
• NOM Certified (#057)
• Backed by a Limited Two-Year Warranty
Four-Level Step Dimmer:
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
911 Switch:
• UL Listed (File #E-7458)
• CSA Certified (File #LR-3413)
*COLOR
Colors available as listed. For color selections,
add suffix to catalog numbers as follows: Ivory
(-I), White (-W), Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A26
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Electronic Timer
and Time Delay Switches
Decora Plus Electronic Timer Switches
Leviton Timers add contemporary styling to any commercial or residential application. Built to the highest
performance standards, Decora Electronic Timers provide long-lasting trouble-free service life.
Four Preset buttons plus an OFF button permit timed control of lights and appliances. Decora Plus
Timers are ideal for heat lamps, foyer and outdoor lights, hot tubs, spas, attic and exhaust fans. LED’s
indicate elapsed time and flash “Two Minutes Until OFF” warning.
Commercial Grade
Electronic Timer Switches 120V AC 60Hz
6515M-W
DESCRIPTION
CAT. NO.
INTERVAL
COLOR
Four Preset Buttons & OFF
3-Wire, Single-Pole (Neutral Required)
1000W Incandescent, 20A Inductive
1 HP @ 120V
6215M
6230M
6260M
6212H
2-5-10-15 Minutes
5-10-15-30 Minutes
10-20-30-60 Minutes
2-4-8-12 Hours
I, W, A
I, W, A
I, W, A
I, W, A
Residential Grade
Electronic Timer Switches 120V AC 60Hz
6690-I
DESCRIPTION
CAT. NO.
INTERVAL
COLOR
Four Preset Buttons & OFF
2-Wire, Single-Pole
500W Incandescent Only
6515M
6560M
6512H
2-5-10-15 Minutes
10-20-30-60 Minutes
2-4-8-12 Hours
I, W, A
I, W, A
I, W, A
Residential Grade
Time Delay Switch (Incandescent Only) 300 WATT 120V AC
TESTING & CODE COMPLIANCE
• UL Listed (File #E-66800—Cat. Nos. 6515M,
6560M, 6512H, 6215M, 6230M, 6260M,
6212H; File #E-7458—Cat. No. 6690)
• CSA Certified (File #LR-68679—Cat. Nos.
6515M, 6560M, 6512H, 6215M, 6230M,
6260M, 6212H; File #LR-67309—Cat. No.
6690)
• NOM Certified (#057)
• Backed by a Limited Two-Year Warranty
*COLOR
Colors available as listed. For color selections, add suffix to catalog numbers as follows: Ivory (-I), White (-W),
Almond (-A).
DESCRIPTION
CAT. NO.
COLOR
Single Pole, Five Minute
Delayed OFF Switch
6690
I, W
All devices are UL Listed and CSA Certified.
2.38 (60.5 mm)
1.53 (38.9 mm)
0.21 (5.3 mm)
1.30
(33.0 mm)
.06 (1.5 mm)
2.63 (66.8 mm)
• Electronic Timer Switch has four preset
buttons plus OFF for timed control of lights
and appliances.
• Electronic Timer Switch LED’s indicate time
elapsed and last LED flashes two minutes
until OFF warning
• Press OFF button on Time Delay Switch —
lights remain ON for 5 minutes before
switching OFF
• All install easily in single gang wallbox in
place of standard switch
• Electronic keypad control
• Matching wallplate included
4.13 (104.9 mm)
SPECIFICATIONS & FEATURES
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
THESE DIMENSIONS APPLY TO ALL ELECTRONIC
TIMER SWITCHES ON THIS PAGE
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
A27
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Programmable
Electronic Timers
Residential Grade
24-Hour Programmable Electronic Timer Switch
DESCRIPTION
CAT. NO.
INTERVAL
COLOR
24-Hour LCD Programmable
Timer Switch 1200W Incandescent,
1200VA Inductive @ 120V AC 60Hz
Motor: 1 HP @ 120V AC 60Hz UL,
3⁄4 HP @ 120V AC 60Hz CSA
Neutral Connection Required
Compatible with electronic ballasts
6124H
24-Hour ON/OFF scheduling
in 30 minute intervals
I, W, A
14-Hour Programmable Electronic Timer Switch
DESCRIPTION
CAT. NO.
INTERVAL
COLOR
14-Hour Segment Programmable
Timer Switch 40W min, 500W max. @
120V AC 60Hz, Incandescent only
Neutral Not Required.
6651
14-Hour ON/OFF scheduling
in hourly intervals
6124H-W
I, W, A
Variable Countdown Timer Switch
DESCRIPTION
CAT. NO.
INTERVAL
COLOR
Rotary-Dial Variable Countdown
Timer Switch 500W Incandescent,
500VA Inductive 1/6 HP @ 120 AC 60Hz
Neutral Connection Required
6652
1 minute to 18 hours
I, W, A
All devices are UL Listed and CSA Certified.
6651-W
0.21
(5.3 mm)
.06 (1.5 mm)
mm
)
1.30
(33.0 mm)
3
1.4 mm)
.3
(36
1.53 (38.9 mm)
2.38 (60.5 mm)
Load Toggle
ON/OFF
4.9
4.13 (104.9 mm)
1111
2.63 (66.8 mm)
5
6
7
SPECIFICATIONS & FEATURES
(10
PM
P
M
12
1
4.13
AM
1.73 (43.9
PROGRAMMABLE ELECTRONIC TIMER SWITCH
Cat. No. 6124H
mm)
PROGRAMMABLE ELECTRONIC
TIMER SWITCH
VARIABLE COUNTDOWN TIMER
Cat. Nos. 6651 and 6652
TESTING & CODE COMPLIANCE
• UL Listed (File #E-66800–Cat. Nos. 6651,
6124H; File #E-148771 Cat. No. 6652)
• CSA Certified (File #LR-68679 Cat. Nos.
6651, 6652, 6124H)
• NOM Certified (#057)
• Backed by a Limited Two-Year Warranty
*COLOR
Colors available as listed. For color selections, add suffix to catalog numbers as follows: Ivory (-I), White (-W),
and Almond (-A).
24-Hour Programmable Timer
• Ideal for a wide variety of commercial and
residential applications including outdoor
lighting, pools, motors, sprinklers, exhaust
and attic fans, bathroom heat lamps, hot tubs
and spas, whole-house exhaust fan scheduling, office lights, janitor closets, landscape
and security lighting
• Permits separate ON or OFF scheduling
for half-hour periods of the day; ON/OFF
manual control available by using button
below display panel
• Decora styling enhances any interior (NOTE:
6124H cannot be used with Decora Plus
Screwless Snap-On Wallplates)
14-Hour Programmable Timer
• Ideal for residential incandescent lighting
control including indoor, outdoor and seasonal lighting
•”Set-it-and-forget convenience” provides
automatic daily control with manual override
• Automates daily switching program (up to 14
hours) by responding to DIP switch ON or
OFF position for each hour; repeats until function switch is moved to Manual or OFF mode
Countdown Timer Switch
• For residential and light commercial applications
including indoor and outdoor lighting, office lights
and ceiling paddle fans
• Simple rotary-dial time selection of settings from
1 minute to 18 hours
• An illuminated LED indicates load is ON. Blinking
LED accompanied by annunciator sound indicates
end of time cycle
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A28
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Occupancy Sensor
Lighting Controls
Commercial Grade
Decora ® Wall Switch Infrared Occupancy Sensor
(Incandescent or Fluorescent)
DESCRIPTION
CAT. NO.
RATING
COLOR
Decora Wall Switch
PIR Occupancy Sensor
with Self-Adaptive Technology
ODS15-ID
(formerly 6768)
I, W, A, G
Decora Wall Switch
PIR Occupancy Sensor
ODS10-ID
(formerly 16775)
Fluorescent: 1800VA @ 120V,
4000VA @ 277V.
Incandescent: 1800W @ 120V.
Motor: 1/4 HP @ 120V
Incandescent: 800W @ 120V,
Fluorescent: 1200VA @ 120V,
2700VA @ 277V.
For 60 Hz AC only.
Motor: 1/4 HP @ 120V
I, W, A, G
Dual-Relay Decora® Wall Switch Infrared Occupancy Sensor
ODS15-IDW in 80301-W
DESCRIPTION
CAT. NO.
PHOTOCELL
CONTROL OPTIONS
PER RELAY
RATING
COLOR
Dual-Relay Decora
Wall Switch PIR
Occupancy Sensor
with Self-Adaptive
Technology
ODS0D-ID
(formerly
6772)
Default Setting: Conference Room Mode
Both Primary.and Secondary
Relays respond to
Ambient Light Override.
Alternate Setting: Classroom Mode
Primary Relay only
responds to Ambient Light
Override.
Primary Relay:
Fluorescent: 1200VA @ 120V,
2700VA @ 277V
Incandescent: 800W @ 120V.
Secondary Relay:
Fluorescent: 800VA @ 120V,
1200VA 277V.
Incandescent: 800W @ 120V
I, W, A, G
Decora® Wall Switch Infrared Occupancy Sensor
ODS0D-IDW in 80301-W
DESCRIPTION
CAT. NO.
RATING
COLOR
Decora Wall Switch PIR Occupancy
Sensor, Single-Pole & 3-Way,
180° field of view
PR180-1L
Incandescent: 500W,
Fluorescent: 400VA Rapid Start Magnetic only @ 120V AC,
Motor: 1⁄8 HP @ 120V AC
I, W, A
Residential Grade
Decora® Wall Switch Infrared Occupancy Sensor
DESCRIPTION
CAT. NO.
RATING
COLOR
Decora Wall Switch PIR Occupancy
Sensor, Single-Pole,
150° field of view
PR150-1L
Incandescent: 500W,
Fluorescent: 400VA Rapid Start Magnetic only @ 120V AC,
Motor: 1⁄8 HP @ 120V AC
I, W, A
All devices are UL Listed and CSA Certified.
A29
1.75 (44.4 mm)
1.30
(33.0 mm)
•
•
•
•
•
UL Listed (File #E-118904)
Cat. No. ODS0D-ID is CUL/US Certified
CSA Certified (File #LR-91148M)
NOM Certified (#057)
Conforms to California Title 24
Energy Code
• Backed by a Limited Five-Year Warranty
Colors available as listed, add suffix to
catalog number as follows: Ivory (-I),
White (-W), Gray (-G), Almond (-A).
MATERIAL CHARACTERISTICS
Operating Temperature: 0°C to 50°C
Storage Temperature: -10°C to 85°C
Relative Humidity: 20% to 90% noncondensing
2.60 (66.1 mm)
1.35
(34.3 mm)
TESTING & CODE COMPLIANCE
COLOR
0.49 (12.6 mm)
4.06 (103.2 mm)
Decora Wall Switch PIR Occupancy
Sensor (ODS15-ID)
• For use in small offices, conference
rooms, class rooms, stock rooms,
lounges, restrooms, warehouses &
commercial areas
• Exclusive automatic “Walk-Through”
sensing increases energy savings by
shutting lights within 2 1⁄2 minutes
after momentary occupancy
• Self-adjusting delayed OFF-time
interval compensates for real-time
occupancy patterns, preventing
unnecessary ON/OFF switching
• 180° field of view, 2100 sq. ft. of
coverage
Dual-Relay Decora Wall Switch PIR
Occupancy Sensor (ODS0D-ID)
• Ideal for class rooms and conference
rooms
• Exclusive automatic “Walk-Through”
sensing
• Provides automatic switching for 2
separate banks of fluorescent, incandescent, or low-voltage lighting from
a single unit
• Self-adjusting delayed OFF-time
interval compensates for real-time
occupancy patterns, preventing
unnecessary ON/OFF switching
• 180° field of view, 2100 sq. ft. of
coverage
• Ambient light override prevents these
devices from switching lights ON
when there is ample natural sunlight
• Push-button manual override is used
to turn lights ON at any time, regardless of the override setting
2.61 (66.3 mm)
SPECIFICATIONS & FEATURES
Wall Switch PIR Occupancy Sensor
(ODS10-ID)
• For use in enclosed offices, storage
rooms, copier rooms & closets
• One unit can be used for 120V or
277VAC 60Hz incandescent, lowvoltage and fluorescent lighting with
either magnetic or electronic ballasts,
and motor loads.
• 180° field of view
• Fits in standard wallbox; gangable
• Delayed-off time settings: 10, 20
and 30 minutes with 30-second
test mode
• Elegant Decora styling; uses Decora
wallplate
ON
OFF
AUTO
BOTTOM
Cat. No. ODS15-ID
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Decora Combination Devices
Commercial Grade
Decora® Combination Devices
15 AMP
DESCRIPTION
RATING
CAT. NO.
COLOR*
Single-Pole Switch/Receptacle
Switch: 15A–120V AC
Receptacle: 15A-125V
5625
I, W, A, GY
Single-Pole Switch/Pilot Light
Switch: 15A–120V AC
Pilot: 1/25W–125V AC
5626
I, W, A
Two Single-Pole Switches
15A-120/277V AC
5634
I, W, A, GY
3-Way Switch/Single-Pole Switch
15A-120/277V AC
5641
I, W, A
Two 3-Way Switches
15A-120/277V AC
5643
I, W, A
3-Way Switch/Receptacle
Switch: 15A–120V AC
Receptacle: 15A–125V
5645
I, W, A
3-Way Switch/Pilot Light
Switch: 15A–120V AC
Pilot: 1/25W–125V
5646
I, W, A
DESCRIPTION
RATING
CAT. NO.
COLOR*
Two Single-Pole Switches
20A-120/277V AC
5627
I, W, A
Single-Pole Switch/Receptacle
Switch: 20A-120V AC
Receptacle: 20A-125V
5636
I, W, A
Single-Pole Switch/Pilot Light
Switch: 20A-120V AC
Pilot: 1/25W-125V AC
5637
I, W, A
Two 3-Way Switches
20A-120/277V AC
5640
I, W, A
5625-W in 80301-W
20 AMP
5634-A in 80301-A
SPECIFICATIONS & FEATURES
All devices are UL Listed and CSA Certified.
• Elegant Decora styling provides multiple
control in a single-gang wallbox
• All devices have grounding screw
• Fit standard wall boxes
TESTING & CODE COMPLIANCE
•
•
•
•
1.31 (33.4 mm)
UL Listed (File #E-7458)
CSA Certified (File #LR-3413)
NOM Certified (#057)
Backed by a Limited Two-Year Warranty
0.10 (2.5 mm)
*COLOR
0.25 (6.5 mm)
Colors available as listed. For other color selections,
add suffix to catalog numbers as follows: Ivory (-I),
White (-W), Almond (-A), Gray (-GY).
HORSE POWER
20A
Switch
__
1 @120V
2 @240V
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
2.61 (66.2 mm)
3.28 (83.3 mm)
4.20 (106.7 mm)
15A
Switch
__
1⁄ 2 @120V
2 @240V
1.06 (26.9 mm)
1.62 (41.1 mm)
0.16 (4.0 mm)
SWITCH/RECEPTACLE
CAT. NO. 5625
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A30
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Decora Combination Devices
Commercial Grade
Decora® Combination Switches
Individual Switches: 15 AMP 120V/Device Total: 20 AMP-120V †
1755-W in 80301-W
DESCRIPTION
CAT. NO.
COLOR*
Dual Rocker Switches
1754
I, W, A
Dual Rocker Switches
with Grounding Lead
1754-2
W
Illuminated Dual Rocker Switches
light is ON when top rocker is off
1754-IL
I, W, A
Three Rocker Switches
1755
I, W, A
Three Rocker Switches
with Grounding Lead
1755-2
I, W
Three Rocker Switches
(Double Pole ON-OFF-ON Top Switch;
Two Single-Pole Switches)
1759
I, W
†WARNING: Although
each individual rocker switch is rated up to 15A 120V, the total combined load for both duplex or all
three triplex switches MUST NOT EXCEED 20 AMPS.
Decora® Combination Switch/SmartLock™GFCI Outlet
Receptacle: 15 AMP 125V/Feed-through: 20 AMP 125V
Switch Rating: 8.3 AMP, 1000 WATTS @ 120V AC
DESCRIPTION
CAT. NO.
COLOR*
Basic Cat. No. Denotes Mahogany
8299
I, W, A
*COLOR
Colors available as listed. For other color selections,
add suffix to catalog numbers as follows: Ivory (-I),
White (-W), Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
1.31
(33.4 mm)
2.70 (68.5 mm)
4.21 (106.9 mm)
2.80 (71.2 mm)
0.27
(6.9 mm)
2.61 (66.2 mm)
• Multi-switch combination devices save space
and add convenience
• Common shunted internally to all switches
• Elegant Decora styling permits ganging with
other Decora devices
• Switch/SmartLock GFCI Receptacle
replaces standard switch/outlet combination
devices in commercial or residential
installations
• Space-saving SmartLock GFCI protection in
new or retrofit construction
• Switch/SmartLock GFCI Receptacle permits
multiple wiring options that allow six different
applications
SmartLock GFCI
• Meets or exceeds UL 2003 Code
Requirements for increased surge immunity,
corrosion resistance, resistance to false tripping and diagnostic indication for line-load
wiring reversal
• Exclusive, patented lockout-action: RESET
button is blocked if GFCI protection has
been compromised, eliminating the risk of
end-users incorrectly assuming that a reset
GFCI is providing ground fault protection
when it actually is not
4.06 (103.2 mm)
SPECIFICATIONS & FEATURES
Single-Pole Switch and
SmartLock GFCI-Protected Outlet
3.26 (82.8 mm)
8299-W
TESTING & CODE COMPLIANCE
Decora Switches
• UL Listed(File #7458)
• CSA (File #LR-3413)
• NOM Certified (#057)
• Backed by a Limited Two-Year Warranty
Switch/SmartLock GFCI Receptacle
• UL Listed (File #48380)
• Listed UL Standard 943, Class A
• CSA Certified (File #LR-57811)
• NOM Certified (#057)
• Backed by a Limited Two-Year Warranty
A31
1.12
(28.4 mm)
1.53
(38.9 mm)
1.11
(28.2 mm)
1.38
(35.0 mm)
1.55
(39.4 mm)
THREE ROCKER SWITCHES
Cat. No. 1755
1.70 (43.2 mm)
1.13
(28.6 mm)
1.53 (38.9 mm)
COMBINATION SWITCH/SmartLock GFCI OUTLET
Cat No. 8299
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Decora Voice, Data
and Video Devices
Commercial Grade
Wall Jacks
Type 625 Single Telephone Wall Jacks
DESCRIPTION
CAT. NO.
COLOR*
Basic Cat. No. Denotes Mahogany
4-Conductor
40649
I, W, GY, E, A
6-Conductor
40638
I, W, GY, A
8-Conductor
40680
I, W, GY
DESCRIPTION
CAT. NO.
COLOR*
Single F Connector
40681
I, W, GY, A
Duplex F Connector
40682
I, W, GY, A
Single F Connector
(includes Snap-On Decora Plus Wallplate)
80381
F Connector Wall Jacks*
40649-I in 80301-I
Basic Cat. No. Denotes Mahogany
Basic Cat. No. Denotes Mahogany
I, W, GY, E, A
*Standard bulkhead F connector for CATV or other video applications. These jacks are not rated UL94V-O.
Decora ® Plus Voice/Data Jacks with QuickPort® Snap-in Modules
DESCRIPTION
CAT. NO.
COLOR*
Empty Platform, No Jacks
41642
I, B, W, GY, E, A
Platform with Two 6-Conductor Jacks
41666
I, W
Platform with Two 8-Conductor Jacks
41688
I, W
Platform with One 6-Conductor Jack
and One F Conductor
41658
I, W
Platform with One 6-Conductor Jack
and One 8-Conductor Jack
41668
I, W
All devices are UL Listed and CSA Certified.
40681 in 80301
SPECIFICATIONS & FEATURES
• All wall jacks are compatible with Decora
Plus snap-on wallplates and Decora
standard wallplates
• All wall jacks can be used with single or
multiple-gang wall boxes
• Modular Jacks have 50 micro-inches hard
gold-plated phosphor bronze spring wire
contacts.
• Jacks can be used for 75-OHM cable connections for televisions, VCR’s and receivers
• Decora Plus Duplex Jack uses snap-in
modules with quick-connect insulation displacement terminals for 22 or 24 AWG wire
TESTING & CODE COMPLIANCE
2.62 (66.6 mm)
4.06 (103.2 mm)
• UL Listed (File #109712) in accordance with
NEC Article 800-51(-I)
• CSA Certified (File #80287 for all cat. nos.
except 80381, which is File #LR-20064)
• NOM Certified (#057)
• Decora F-Connector Wall Jacks meet specs.
for UL 1863
• Meet FCC Part 68 requirements
• All Decora Plus Voice/Data Jack Snap-in
QuickPort modules meet TIA-568A electrical,
mechanical and transmission requirements
• Wall Jacks’ housings of high-impact, selfextinguishing plastic, rated UL 94 V-O
• Backed by a Limited Two-Year Warranty
1.30 (33.0 mm)
0.44 (11.1 mm)
DECORA TYPE 625 SINGLE TELEPHONE WALL JACK
Cat. No. 40649
*COLOR
Colors available as listed. For other color selections,
add suffix to catalog numbers as follows: Brown (-B)
Ivory (-I), White (-W), Gray (-GY), Black (-E), Almond (-A).
MATERIAL CHARACTERISTICS
Environmental Flammability: Meet specs for
UL1863
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
For QuickPort ® Snap-in Modules,
see section “S”
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A32
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Canadian
347V AC Quiet Rocker Switches
Commercial Grade
Back and Side Wired
15 AMP 347V AC
DESCRIPTION
CAT. NO.
COLOR*
Single-Pole Rocker Switch
5691-C
I, W, A, G, E, R
Double-Pole Rocker Switch
5692-C
W
3-Way Rocker Switch
5693-C
I, W, A, G, E, R
4-Way Rocker Switch
5694-C
W, R
DESCRIPTION
CAT. NO.
COLOR*
Single-Pole Rocker Switch
5621-C
W
3-Way Rocker Switch
5623-C
W
4-Way Rocker Switch
5624-C
W
20 AMP 347V AC
5691-CI in 80401-CNI
Midway Nylon Wallplates
For Canadian 347V Decora Devices
DESCRIPTION
5691-CW in 80401-CNW
CAT. NO.
COLOR*
80401-CN
I, W, G, E
80409-CN
I, W, G, E
80411-CN
I, W, G, E
80412-CN
I, W, G, E†
1-GANG
SPECIFICATIONS & FEATURES
• New architecturally-styled smooth-action
concave rocker
• Heavy-duty impact-resistant thermoplastic
construction for long service life in commercial applications
• Full rated current capacity with tungsten,
fluorescent or resistive loads. Motor capacity
is 80% of switch rating
• Wrap-around heavy-gauge strap with locking
tabs for added strength
• Back and side-wiring terminals accept both
solid and stranded wire to ease installation
• Green grounding screw
• Canadian 347V Decora wallplates available
in a number of colors
• Note: Decora Plus Canadian 347V switches
fit only those wallplates designated for 347V
AC devices
• Note: Canadian 347V Decora wallplates fit
“Commander Type” boxes
2-GANG
3-GANG
4-GANG
†For
black 4-gang wallplate, order Cat. No. 80412-98E
All devices are UL Listed and CSA Certified.
TESTING & CODE COMPLIANCE
7.62 (193.6 mm)
1.30 (33.0 mm)
SINGLE POLE
Cat. No. 5621-C & 5691-C
4.06 (103.2 mm)
4.88 (123.8 mm)
2.75 (69.8 mm)
3.53 (89.7 mm)
For color selection, add suffix to catalog number as
follows: Ivory (-I), White (-W), Gray (-G), Black (-E),
Almond (-A) and Red (-R).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
0.26
(6.6 mm)
1.16 (29.4 mm)
2.62 (66.5 mm)
*COLOR
1.60
(40.7 mm)
1.76
(44.6 mm)
4.31 (109.5 mm)
Switches
• UL Listed (File #E-7458)
• CSA Certified (File #LR-3413)
Wallplates
• UL Listed (File #E-13397)
• CSA (File #LR-16347)
• NOM Certified (#057)
• Fully compliant with NEMA Standards WD-1
• Backed by a Limited 10-Year Warranty
1.42 (36.1 mm)
3-GANG
Cat. No. 80411-CN
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
A33
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Wallplates
Commercial Grade
Screwless Snap-On Wallplates
DESCRIPTION
CAT. NO.
COLOR*
80301
I, W, GY, E, A
80309
I, W, GY, E, A
80311
I, W, A
80312
I, W, A
80321-I
W, (No Mahogany)
80326-I
W, (No Mahogany)
CAT. NO.
COLOR*
Basic Cat. No. Denotes Mahogany
1-GANG
2-GANG
3-GANG
4-GANG
80301-SW
5-GANG
6-GANG
Nylon Wallplates
DESCRIPTION
Basic Cat. No. Denotes Mahogany
80401-N
I, W, GY, E, A, R, B
80409-N
I, W, GY, E, A, R, B
80411-N
I, W, GY, A
80412-N
I, W, A
1-GANG
2-GANG
3-GANG
84401-40
4-GANG
SPECIFICATIONS & FEATURES
Metal Wallplates
DESCRIPTION
BRUSH BRASS
SATIN FINISH
.O40" THICK
POLISHED
BRASS
.O40" THICK
NON-MAGNETIC
ALUMINUM
STAINLESS STEEL SATIN FINISH
.032" THICK
.040" THICK
81401
81401-PB
84401-40
83401
81409
81409-PB
84409-40
83409
–
–
84455-40
–
81411
81411-PB
84411-40
–
81412
–
84412-40
–
81423
–
84423-40
–
–
–
84436-40
–
1-GANG
2-GANG
1-GANG
1-Decora 1-Duplex
3-GANG
4-GANG
5-GANG
6-GANG
All devices are UL Listed and CSA Certified.
4.50 (114.3 mm)
3.81 (96.8 mm)
2.75 (69.9 mm)
Decora Plus Screwless Snap-On Wallplates
• UL Listed (File #E13397)
• Meet NEMA Standards WD-1
• CSA Certified (File #LR16347)
• NOM Certified (#057)
• Backed by a Limited 10-Year Warranty
Metal Wallplates & Plastic Adapters
• UL Listed (File #92327)
• CSA Certified (File #LR16347)
• NOM Certified (#057)
• Meet NEMA Standards WD-1
• Backed by a Limited 10-Year Warranty
Decora Plus Screwless and Nylon Wallplates
Basic Cat. No. denotes Mahogany device. For other
color selections, add suffix to the catalog number as
follows: Ivory (-I), White (-W), Gray (-GY), Black (-E),
Almond (-A), Red (-R) and Blue (-B).
Metal Wallplates
Brass, stainless steel or aluminum finish as listed
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
0.25 (6.4 mm)
1.31 (33.3 mm)
SCREWLESS SNAP-ON WALLPLATE
Cat. No. 80301
TESTING & CODE COMPLIANCE
*COLOR
0.26
(6.5 mm)
2.63 (66.8 mm)
4.61 (117.1 mm)
2.75 (69.9 mm)
Decora Plus Screwless Snap-On Wallplates
• Feature sleek, smooth contemporary
architectural styling with hidden mounting
screws that complement fine decors
• Decora compatible — two-piece kit allows
easy retrofit to any Decora installation
• Impact-resistant thermoplastic construction
stands up to abuse and cleaning solutions
Nylon and Metal Wallplates
• Include color-matched screws
NYLON WALLPLATE
Cat. No. 80401-N
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A34
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Decora Wallplates
Standard Size Smooth Plastic Wallplates
DESCRIPTION
CAT. NO.
COLOR*
Basic Cat. No. Denotes Mahogany
80401
I, W, GY, E, A
80409
I, W, GY, E, A
2-GANG
1-Decora 1-Toggle
80405
I, W, GY, E, A
2-GANG
1-Decora 1-Duplex
80455
I, W, A
2-GANG 1-Decora
1-Telephone (.406 in hole)
80479
I, W
80411
I, W, GY, E, A
3-GANG
2-Decora 1-Toggle
80431
I, W, GY
3-GANG
2-Toggles 1-Decora
80421
I, W, GY, E, A
3-GANG 1-Decora
1-Toggle 1-Telephone
80442-I
Ivory Only
3-GANG
2-Decora 1-Telephone
80443-I
Ivory Only
80412
I, W, GY, A, E
80423
I, W, GY, A, E
80436
I, W, GY, A, E
80407
I†, W†
80408
I†, W†
1-GANG
2-GANG
80405-W
3-GANG
Decora Standard/Midway wallplate
size comparison ( 3⁄ 8" wider and
longer), 80401 in front of 80601.
4-GANG
SPECIFICATIONS & FEATURES
• A wide selection of sixes and colors to blend
with any wall covering
• Smooth face and rounded edges that resist
dust accumulation
• Individual plastic wrapping to protect
surfaces
• Color-matched mounting screws supplied
5-GANG
6-GANG
7-GANG
8-GANG
TESTING & CODE COMPLIANCE
•
•
•
•
•
UL Listed (File #E-13397)
CSA Certified (File #LR-16347)
NOM Certified (#057)
Full compliance with NEMA Standards WD-1
Backed by a Limited Two-Year Warranty
†Painted
metal wallplate.
Midway Size Smooth Plastic Wallplates
DESCRIPTION
*COLOR
Basic Cat. No. denotes Mahogany device. For other
color selections, add suffix to the catalog number as
follows: Ivory (-I), White (-W), Gray (-GY), Black (-E)
and Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C)
CAT. NO.
COLOR*
Basic Cat. No. Denotes Mahogany
80601
I, W, GY, A
80609
I, W, GY, A
2-GANG
1-Blank 1-Decora
80608
I, W, A
2-GANG
1-Decora 1-Toggle
80605
I, W, A
80611
I, W, A
80612
I, W, A
1-GANG
2-GANG
3-GANG
4-GANG
All devices are UL Listed and CSA Certified.
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
A35
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Decora
Wallplate Accessories
Residential Grade
Wallplate Replacement Screws (5⁄16"–6x32 threads)
DESCRIPTION
CAT. NO.
DESCRIPTION
CAT. NO.
Almond
100 per box
82400
Ivory
100 per box
86400
Black
100 per box
83400
Gray
100 per box
87400
Stainless Steel
100 per box
84400
White
100 per box
88400
Brown
100 per box
85400
Red
100 per box
89400
Decora Replacement Screws
Standard Size Plastic Adapters
DESCRIPTION
CAT. NO.
COLOR*
80400
I, W, GY, E, A
80414
I, W, GY, E, A
40681-I
W, GY, E, A
Basic Cat. No. Denotes Mahogany
Dimmer Shaft (.406” hole)
Blank (no hole)
80400-A/80414-I
CATV Jack
6197
I, W
Wallbox Adapter
Extends shallow wallbox
to fit GFCI/Decora devices
TESTING & CODE COMPLIANCE
• Backed by a Limited Two-Year Warranty
*COLOR
Colors available as listed. For other color selections,
add suffix to catalog numbers as follows: Ivory (-I),
White (-W), Gray (-GY), Black (-E), Almond (-A).
Decora® Plus Standard Size Plastic Adapters
DESCRIPTION
CAT. NO.
COLOR*
80381
I, W, GY, E, A
80314
I, W, GY, E, A
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
CATV Jack
Blank (no hole)
All devices are UL Listed and CSA Certified.
For more information regarding matching
wallplates, colors, materials, single and
multi-gang, refer to Wallplates, section G.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
A36
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
“
I install a lot of Leviton’s Decora Home
Controls in new and remodeled homes.
My contractors tell me they’re easy to install.
And my customers love the convenience of
remote control lights and appliances.
The system programs any light and electrical
appliance in the house. DHC gives my
customers security and energy savings.
No wonder they like it.
”
Home Builder
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com