Model AM Flo-Setter (Externally Adjustable) 2-Way Automatic Balance Hose Kits - Submittal
Hose Kit Size
Flow Range
Qty.
.18 - 4.84
.31 - 8.15
.44 - 10.35
1/2"
3/4"
1"
1-1/4"
**1-1/2"
**2"
Trunk Connection Type
(provided)
FNPT (Std.)
MNPT
Return
FSWT
Hose Length
.88 - 21.13
12”
18”
24”
36”
Custom Length
1.76 - 32.76
2.2 - 45.46
**1-1/2” and 2” hose kits use Chamberlin
All Metal stainless steel braided hose.
COIL
Supply Line Options
Ball Valve w/ PT
UBY Strainer w/ PT and BDV
Supply
ATC Selection: Not Required
2-Way
3-Way
NOTE:
24v, Zone Valves: 1/2"-1"
* Hose kits assembled hand tight.
NO
NSR NC
NSR NC
On-Off
3 pt. Flt.
0-10Vdc
24v, Ball Valves: 1-1/4"-2"
On-Off
3 pt. Flt.
0(2)-10Vdc
WARNING:
NO
Comments:
Unit Connection Options
Reducers
FSWT Hose Adapter (1/2"- 1-1/4" hoses)
Optional Union Accessories
FNPTxMNPT Union w/ PT / MAV
FNPTxFNPT Union w/ PT / MAV
FNPTxFSWT Union w/ PT / MAV
To insure proper installation, this hose assembly must be installed according to instructions included with shipment.
Instructions are also available online at www.chamflex.com.
Company:
Rep:
Approved By:
Project:
Quote #:
PO #:
Chamberlin Rubber Company, Inc.
www.chamflex.com
* Drawings not to scale - Representation Only.
* Fit within installation areas not guaranteed.
Note: 2-way or 3-way ATC’s sized per kit as standard.
Date:
Model AM Flo-Setter Automatic Balance Hose Kits
Model AM Circuit Sentry Flo-Setter Automatic Balance Valve
Balance Type:
Body Design:
Body:
Spring:
Diaphragm:
O-Rings:
Max. Working Pressure:
Min. psid:
Max. psid:
Cartridge Accuracy:
Automatic Flow Limiting Valve externally adjustable flow setting capability.
Brass Valve + Model AM w/PT’s, External GPM dial
Brass
Stainless Steel
HNBR
EPDM
290 psig
Varies with GPM setting
60
+/- 5%
Supply Valve Options:
Ball Valve Manual Balance Valve
Model UBY Combination Ball Valve & Strainer w/ PT and BDV
Balance Type:
Body Design:
Manual
Full Port Ball Valve w/PT
Body:
Brass
Ball:
Full Port Chrome Plated
Body:
Brass
Ball Seal:
PTFE
Ball:
Chrome Plated Brass
Stem:
Stainless Steel Explosion Proof
Stem
Brass
O-Rings:
EPDM
O-Rings:
BUNA-N
Strainer:
20 Mesh Stainless Steel
Stem Packing:
PTFE
Maximum Working Pressure:
400 psig
Seat:
Handle:
PTFE
Zinc Plated Steel w/ Plastic Coating
Maximum Operating Temp:
-4oF to 250oF
Working Pressure:
600 psig
For detailed technical data for any Hose Kit component, refer to the ChamFlex® catalog.
Chamberlin Rubber Company, Inc.
www.chamflex.com
Model AM Flo-Setter Automatic Balance Hose Kits
Flow Rates/Minimum PSID
Flow Rate 0.18 0.5 1 1.5 2 2.5 3 3.5 4 4.5 4.54 1/2" Min.∆P 2.32 2.4 2.47 2.56 2.62 2.7 2.77 2.85 2.9 2.97 3.2 Se ng Min. 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Max. 3/4" Min.∆P 1.74 2 2.25 2.5 2.75 2.95 3.2 3.35 3.77 Se ng Min. 1 2 3 4 5 6 7 Max. 1" Min.∆P 1.74 1.9 2.1 2.35 2.5 2.75 3 3.2 3.4 3.65 4 4.35 Se ng Min. 1 2 3 4 5 6 7 8 9 10 Max. Flow Rate 0.31 1 2 3 4 5 6 7 8.15 Flow Rate 0.44 1 2 3 4 5 6 7 8 9 10 10.35 Chamberlin Rubber Company, Inc.
www.chamflex.com
Flow Rate 0.88 2 4 6 8 10 12 14 16 18 20 21.13 Flow Rate 1.76 5 10 15 20 25 30 32.76 Flow Rate 2.2 5 10 15 20 25 30 35 40 45.46 1‐1/4" Min.∆P 2.03 2.2 2.38 2.6 2.75 3 3.2 3.38 3.6 3.75 4 4.32 Se ng Min. 2 4 6 8 10 12 14 16 18 20 Max. 1‐1/2" Min.∆P 2.18 2.5 2.8 3.2 3.55 3.88 4.25 4.64 Se ng Min. 5 10 15 20 25 30 Max. 2" Min.∆P 2.47 2.6 3.95 3.25 3.55 3.95 4.25 4.6 5 5.5 Se ng Min. 5 10 15 20 25 30 35 40 Max. * Cartridge Accuracy: +/- 5%
ChamFlex® Hose Assemblies - Fixed End x Swivel End
Overall Length
(without adapter)
ChamFlex® Standard hose: Fixed End x Swivel End w/ JIC x MNPT Adapter
Hose Sizes:
Hose Lengths:
Inner Tube:
Outer Braid:
Hose Fittings:
Hose/Adapter Connection:
Fixed End Fitting:
Swivel End Adapter Option:
1/2” to 1-1/4”
Standard:
12”, 18”, 24”, 36” and 48”
Custom:
1/2” & 3/4” - Minimum length: 6” with 1” increments.
1” & 1-1/4” - Minimum length: 9” with 1” increments.
EPTF - White Santoprene with UL-94 VO Fire Rating
302/304 Stainless Steel
Plated Steel
Male JIC Metal to Metal Seal (no O-ring or gaskets)
MNPT
FNPT (plated steel), FSWT (brass)
1/2” Hose
3/4” Hose
1” Hose
1-1/4” Hose Working Pressure
400 PSI
400 PSI
500 PSI
400 PSI
Burst Pressure
1600 PSI
1600 PSI
2000 PSI
1600 PSI
2.5”
4”
5.5”
10”
Minimum Bend Radius
Temperature Ratings
-40oF to 212oF -40oF to 212oF -40oF to 212oF -40oF to 212oF
Chamberlin Rubber Company, Inc.
www.chamflex.com
ChamFlex® Hose Assemblies - Swivel End x Swivel End
MNPT
MNPT
FNPT
FNPT
Overall Length
(without adapter)
FSWT
FSWT
ChamFlex® hose: Swivel End x Swivel End w/ JIC Adapters
Hose Sizes:
Hose Lengths:
Inner Tube:
Outer Braid:
Hose Fittings:
Hose/Adapter Connection:
Swivel End Adapter Options:
1/2” to 1-1/4”
Standard:
12”, 18”, 24”, 36” and 48”
Custom:
1/2” & 3/4” - Minimum length: 6” with 1” increments.
1” & 1-1/4” - Minimum length: 9” with 1” increments.
EPTF - White Santoprene with UL-94 VO Fire Rating
302/304 Stainless Steel
Plated Steel
Male JIC Metal to Metal Seal (no O-ring or gaskets)
MNPT, FNPT (plated steel), FSWT (brass)
1/2” Hose
3/4” Hose
1” Hose
1-1/4” Hose Working Pressure
400 PSI
400 PSI
500 PSI
400 PSI
Burst Pressure
1600 PSI
1600 PSI
2000 PSI
1600 PSI
2.5”
4”
5.5”
10”
Minimum Bend Radius
Temperature Ratings
-40oF to 212oF -40oF to 212oF -40oF to 212oF -40oF to 212oF
ChamFlex® Hose Assemblies
ChamFlex® Hose Assemblies - Submittal Drawing Chamberlin Rubber Company, Inc.
www.chamflex.com
Chamberlin All Metal Stainless Steel Hose Assemblies
Overall Length
Chamberlin All Metal Stainless Steel Assembly with Union End
Hose Sizes:
Hose Lengths:
Inner Tube:
Outer Braid:
Fittings:
Fixed End Fittings:
Union End Fittings:
Working Pressure:
Burst Pressure:
Minimum Bend Radius:
Temperature Rating:
Hose Sizes:
Hose Lengths:
Inner Tube:
Outer Braid:
Fittings:
Fixed End Fittings:
Union End Fittings:
Working Pressure:
Burst Pressure:
Minimum Bend Radius:
Temperature Rating:
1-1/2” to 2”
Standard:
12”, 18”, 24”, 36”
Custom:
Minimum length: 12” with 1” increments.
321L/316L Stainless Steel
304L Stainless Steel
Iron/Carbon Steel
MNPT
MNPT
300 psi
1200 psi
1-1/2” - 11.75”
2” - 12.55”
-20oF to 800oF
2-1/2”
Standard:
18”, 24”, 36”
Custom:
Minimum length: 18” with 1” increments.
T321L Stainless Steel
Series 300 Stainless Steel
Iron/Carbon Steel
MNPT
MNPT
300 psi
1200 psi
16”
-20oF to 800oF
Chamberlin Rubber Company, Inc.
www.chamflex.com
Siemens 599 Series ATC Zone Valves
2-Way and 3-Way Zone Valves
Standard Features
Line Sizes:
1/2” - 1”
Body Style:
Globe
 UL Listed for Plenum installations.
 All metal plug and seat.
 Direct coupled bonnet—install actuator without tools.
 Standard 2.5 mm strike.
 Change from normally open to normally closed by simply changing actuators.
 Visual position indicator.
 Manual Override: 2 Position with auto lock, 3 Pt. Flt. & 0-10Vdc using hex wrench.
Valve Body
Flow Characteristic:
Body:
Trim:
Stem:
O-Rings:
Packing:
Medium:
Medium Temp Range:
Max. Inlet Pressure:
Leakage Rate:
Close Off Ratings:
2 Position Actuators
Voltage:
Frequency:
Power Consumption:
Run Time:
Nominal Stroke:
Nominal Force
Operating Temp:
Noise:
Linear
Brass
Brass
SS ASTM A582 type 303
EPDM
EPDM O-rings
Water, Glycol Solns. to 50%
34oF to 230oF (1oC to 110oC)
125 psig
ANSI Class III
ANSI/FCI 70-2, 2-way & 3-way valves
1/2” - 3/4” (44 psi), 1” (22 psi)
24 Vac +/- 20%
24 Vac - 50/60 Hz
9.8 VA
10 seconds
1/10-in. (2.5 mm)
24 lb. (105 N)
41oF to 122oF (5oF to 50oC)
<35 db
Chamberlin Rubber Company, Inc.
www.chamflex.com
Available CV’s
2-Way:
3-Way:
1/2” - 1.0, 2.5, 4.0
3/4” - 4.1
1” - 7.0
1/2” - 1.0, 2.5, 4.0
3/4” - 4.1
1” - 7.0
3 Pt. Floating/ 0-10Vdc ACTUATORS (Non-Fail Safe)
Voltage:
24 Vac +/- 20%
Frequency:
24 Vac - 50/60 Hz
Power Consumption:
3 Pt. Flt. - 0.8 VA
0-10Vdc - 2.5 VA
Run Time:
3 Pt. Flt. - 150 sec.,
0-10Vdc - 34 sec.
Nominal Stroke:
1/10-in. (2.5 mm)
Nominal Force:
24 lb. (105 N)
Operating Temp:
41oF to 122oF (5oF to 50oC)
Siemens 599 Series ATC Ball Valves
2-Way and 3-Way Ball Valves
Standard Features
Line Sizes:
1-1/4” - 2”
Body Style:
Ball
♦
1/4 turn rotary control valves designed to be coupled with an OpenAir actuator.
♦
Universal mounting plate accommodates different actuator sizes.
♦
Variety of ball sizes and flow coefficients.
♦
Actuator and plate can be rotated to facilitate installation and wiring.
♦
Standoffs and mounting plate provide thermal barrier between the actuator and valve.
♦
Plastic mounting plate, extension and handle do not condensate.
♦
Operating handle can be manually operate valve in event of power failure.
Valve Body
Flow Characteristic:
Body:
Ball:
Ball Seals:
Flow Optimizer:
Stem:
Stem Seals:
Angle of Rotation:
Medium:
Medium Temp Range:
Static Pressure/Temp:
Close Off Ratings:
Fail Safe Actuators
Voltage:
Frequency:
Power Consumption:
Run Time:
Spring Return:
Running Torque:
Enclosure:
Equal %
Brass
Chrome Plated Brass
Glass-filled PTFE with EPDM O-rings
Glass-filled PTFE
Brass, Double O-ring, Blow-out proof
Brass, Double O-ring, Blow-out proof
0 to 90 degrees
Water, Glycol Solns. to 50%
35oF to 250oF (2oC to 121oC)
360 psig/250oF (600 WOG)
200 psi for all 2-way, 200 psi for all 3-way
24 Vac +/- 20%
24 Vdc +/- 15%
50/60 Hz
5 VA running, 4 VA holding
90 seconds
15 sec. (typical)
62 lb.
NEMA 1
Chamberlin Rubber Company, Inc.
www.chamflex.com
3 Pt. Floating/ 0-10Vdc ACTUATORS (Non-Fail Safe)
Voltage:
24 Vac +/- 20%, 15%
Frequency:
50/60 Hz
Power Consumption:
3.3 VA
Run Time:
1-1/4” 2-way & 3-way: 90 sec.
1-1/2” - 2” 2-way & 3-way: 125 sec.
Running Torque:
1-1/4” 2-way & 3-way: 44 lb.
1-1/2” - 2” 2-way & 3-way: 88 lb.
Enclosure:
NEMA 1