NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION
1300 N. 17th Street, Suite 1752, Rosslyn, VA 22209
(703) 841-3200
Business Information Services
Electrical Connector Section - Underground Distribution Type Cable
Connectors and Accessories Voting Classification (8-CC-IV)
Domestic Net Sales Billed of Connectors for Residential and
Medium Density Underground Distribution Application (Rated 600 V or Less)
Underground Distribution Type Connectors
Factory pre-insulated junction connector systems;
includes junction bar or block element and mating
terminal or plug connector element.
Junction connectors or connector systems, uninsulated
or for use in conjunction with separate insulating
cover; includes junction bar or block element, mating
terminal (if any), and insulating cover.
Factory pre-insulated multi-conductor transformer
terminal connector systems; includes terminal bar
or block, but not mating lug connector element
unless different from lugs reported under Item 1.
Multi-conductor transformer terminal connector systems,
uninsulated or for use with separate insulating cover;
includes terminal bar or block, insulating cover but
not mating lug connector element unless different from
lugs reported in Item 1.
Compression or Mechanical Terminals for underground
distribution secondary application not specifically
designed to mate with junction bar or block elements
reported in Items 1 through 4 above.
Item No.
Company ID:
Reporting Period:
Domestic Net Sales
Billed
1
2
3
4
5
TOTAL
Exclude all sales to foreign countries and all sales or transfers to other divisions or plants of your
company.
Survey Form 3.3.1 (2) S-570
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION
1300 N. 17th Street, Suite 1752, Rosslyn, VA 22209
(703) 841-3200
Business Information Services
Electrical Connector Section Pressure Connector Voting Classification (8-CC-II)
Company ID:
Reporting Period:
Pressure Connectors - NEC classified and other applications
Item No.
not elsewhere classified
Mechanical/Bolted for aluminum, aluminum & copper terminals,
splices, and taps
Mechanical/Bolted for copper only terminals, splices, and taps
Compression for aluminum, aluminum & copper terminals, splices,
and taps
Compression for copper only terminals, splices, and taps
Domestic Net Sales
Billed
1A
1B
2A
2B
3
Insulation piercing for copper & aluminum
4
Pre-insulated mechanical, copper & aluminum
TOTAL
Exclude all sales to foreign countries and all sales or transfers to other divisions or plants of your
company.
Product Definitions
Item 1A - Dual-Rated CU-AL Mechanical Set Screw with or without internal Tang L-shapes, Panel
Board, Collars, Splices, and Run & Tap Connectors.
Item 1B - Intended for Copper-Only Conductor. Mechanical Set-Screw with or without internal Tang LShapes, Panel Board, Collars, Solderless Lugs and Run and Tap Connectors.
Item 2A - Dual-Rated CU-AL Aluminum Body Compression Lugs, Splices and Taps.
Item 2B - Copper Body for Copper-Only Compression Lugs, Splices, and Taps.
Item 3 - Dual-Rated CU-AL Insulated Piercing Connectors.
Item 4 - Pre-insulated Dual-Rated CU-AL Mechanical Set Screw or Tool Applied Connectors.
STATISTICS REPORTING MANUAL
APRIL, 2009
CONNECTORS SECTION
PAGE 2
Pressure Connectors NEC classified and other
applications not elsewhere
classified
Item No.
Mechanical/Bolted for
aluminum, aluminum &
copper terminals, splices,
and taps
1A
Mechanical/Bolted for
copper only terminals,
splices, and taps
1B
Compression for
aluminum, aluminum &
copper terminals, splices,
and taps
2A
Compression for copper
only terminals, splices,
and taps
2B
Insulation piercing for
copper & aluminum
3
Pre-insulated mechanical,
copper & aluminum
4
Product Pictures
STATISTICS REPORTING MANUAL
APRIL, 2009
CONNECTORS SECTION
PAGE 3
Survey Form 3.1.1 (3) S-571
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION
1300 N. 17th Street, Suite 1752, Rosslyn, VA 22209
703-841-3200
Business Information Services
Electric Power Connector Voting Classification (8-CC-I)
Domestic Sales Billed of Electric Power Connectors
Company ID:
DOMESTIC SALES BILLED OF ELECTRIC SUB-STATION POWER CONNECTORS
Reporting Period:
Domestic Sales Billed (or Orders Booked)
Electric Power Connectors
Item No.
Bolted Power Connectors - Copper
1
Bolted Power Connectors - Aluminum or
Plated Copper for use on aluminum and
copper
2
Bus Support Clamps - Copper
3
Bus Support Clamps - Aluminum or Plated
Copper for use on Aluminum
4
Weldment Connectors, including Bus Support
Clamps*
5
Standard Power
Connector Design
(Normally used on
voltages up to and
including 230kV)
EHV Power Connectors
Design (Normally used on
voltages of above 230 kV)
TOTAL
* Excluding all bus support clamps reported in Items 3 and 4 above.
The EHV column includes all power connectors which are designed to meet special operating conditions
characteristic of Extra High Voltages. This specifically includes standard power connector designs
modified by the addition of shielding devices such as bells, rings or shaped caps.
Survey Form 3.1.1 (4) S-573
STATISTICS REPORTING MANUAL
APRIL, 2009
CONNECTORS SECTION
PAGE 4
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION
1300 N. 17th Street, Suite 1752, Rosslyn, VA 22209
(703) 841-3200
Business Information Services
Electrical Connector Section Grounding Products Voting Classification (8-CC-V)
Company ID:
Reporting Period:
Quarterly Sales of Grounding Product Connectors
Item. No.
Grounding Product Connectors
Couplers
1
Connectors-Mechanical
2
Connectors-Compression
3
Connector- Exothermic
4
Ground Rods
5
Grounding Assemblies
6
Domestic Net Sales
Billed
TOTAL
Exclude all sales to foreign countries and all sales or transfers to other divisions or plants of your
company.
PRODUCT DEFINITIONS
1. Couplers : Used to extend ground rods through threaded or other fastening means.
2. Connectors - Mechanical : Connectors that join ground rods to cable, also joins raised floor
pedistacs, and cable trays & conduit (wrenches).
3. Connectors - Compression : Connectors that join ground rods to cable with "tool applied" through
irreversible deformation.
4. Connectors - Exothermic
5. Ground Rods : Copper-clad, zinc-plated, hot-dip galvanized and stainless steel ground rods.
6. Grounding Assemblies : Grounding grids, discs, and pole plates.
Survey Form 3.1.1 (5) S-575
STATISTICS REPORTING MANUAL
APRIL, 2009
CONNECTORS SECTION
PAGE 5
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION
1300 N. 17th Street, Suite 1752, Rosslyn, VA 22209
(703) 841-3200
Business Information Services
Electrical Connector Section Installation Tools Voting Classification (8-CC-VI)
Company ID
Reporting Period:
Item No.
Installation Tools & Associated Dies
Mechanical Crimping Tools
Domestic Net Sales
Billed
1
Manual Hydraulic Tools
2A
Power Hydraulic Tools, non-battery
2B
Power Hydraulic Tools, battery
3
Crimping Dies
4
TOTAL
Exclude all sales to foreign countries and all sales or transfers to other divisions or plants of your
company.
STATISTICS REPORTING MANUAL
APRIL, 2009
CONNECTORS SECTION
PAGE 6
Installation Tools & Associated Dies
Mechanical Crimping Tools
Item No.
Product Pictures
1
Manual Hydraulic Tools
2A
Power Hydraulic Tools, non-battery
2B
Power Hydraulic Tools, battery
3
Crimping Dies
4
STATISTICS REPORTING MANUAL
APRIL, 2009
CONNECTORS SECTION
PAGE 7
Survey Form 3.1.1 (6) S-587
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION
1300 N. 17th Street, Suite 1752, Rosslyn, VA 22209
703-841-3200
Business Information Services
Statistical Report Form for the Electrical Connector Section
Overhead Lines Connector Voting Classification (8-CC-III)
Company ID:
Reporting Period:
DOMESTIC NET SALES BILLED OF OVERHEAD DISTRIBUTION LINES CONNECTORS
Description
Item
Split bolt and vise type connectors, with and without washers or spacers. Includes copper split bolts and vise type
connectors, aluminum split bolt and vise type connectors and plated bolt and vise type connectors, unfilled or filled
with compounds. Service entrance connectors, bolted or mechanical type, copper or aluminum, with or without
washers or spacers.
Two-bolt clamps, copper or aluminum, plated or unplated, with or without spacers. Center bolt type connectors are
specifically excluded.
Bolted parallel groove clamps, copper or aluminum, plated or unplated, with or without liners, unfilled or filled with
inhibitor or contact paste.
Service entrance connectors, aluminum bodied compression type, for use with copper or aluminum conductors, to
freely accept a maximum conductor size of 1/0 ACSR.
U-bolt connectors and/or clamps with spacers, copper or aluminum plated or unplated with or without liners, unfilled
or filled with compound.
Compression parallel tap connectors, tool installed (H-frame, Figure 3, Figure 6 or C-shape), copper or aluminum,
plated or unplated, filled or unfilled with inhibitor or contact paste, with or without tabs, one piece or assemblies.
TOTAL (Item 1 through 6)
Domestic Sales Billed (Value)
1
2
3
4
5
6
$
*Report data for "Domestic Sales Billed", if possible. Otherwise report data for "Domestic Orders Booked".
Report all sales billed (or orders booked) to customers in the 50 states, Washington, D.C., Puerto Rico, Guam,
American Samoa, Panama Canal Zone, and the Virgin Islands.
INCLUDE all sales billed (or orders booked) to the U.S. Government regardless of where the products are to be
shipped or used, except where the Government is acting as an agent in making purchases for a foreign interest.
EXCLUDE all sales (or orders booked) to foreign countries.
STATISTICS REPORTING MANUAL
APRIL, 2009
CONNECTORS SECTION
PAGE 8
Overhead Distribution Lines
Connectors
Item
Split bolt and vise type connectors,
with and without washers or
spacers. Includes copper split bolts
and vise type connectors, aluminum
split bolt and vise type connectors
and plated bolt and vise type
connectors, unfilled or filled with
compounds. Service entrance
connectors, bolted or mechanical
type, copper or aluminum, with or
without washers or spacers.
1
Two-bolt clamps, copper or
aluminum, plated or unplated, with
or without spacers. Center bolt type
connectors are specifically
excluded.
2
Bolted parallel groove clamps,
copper or aluminum, plated or
unplated, with or without liners,
unfilled or filled with inhibitor or
contact paste.
3
Service entrance connectors,
aluminum bodied compression type,
for use with copper or aluminum
conductors, to freely accept a
maximum conductor size of 1/0
ACSR.
4
U-bolt connectors and/or clamps
with spacers, copper or aluminum
plated or unplated with or without
liners, unfilled or filled with
compound.
5
Compression parallel tap
connectors, tool installed (H-frame,
Figure 3, Figure 6 or C-shape),
copper or aluminum, plated or
unplated, filled or unfilled with
inhibitor or contact paste, with or
without tabs, one piece or
assemblies.
6
Product Pictures
STATISTICS REPORTING MANUAL
APRIL, 2009
CONNECTORS SECTION
PAGE 9