Multi-function Food Product Timers
Sixteen Channel
Programmable Timer
Model TNC-T9010-010 Features
/// Pre-set cooking times and functions for all food
products
/// Audio and visual alert signals with flashing display
messages and six selectable volume levels
/// Two large, easy-to-read, 16-character dot matrix
displays
/// On/off switch
/// MODE/TIME touchpad button to review OPERATE
Product Description
or PROGRAM modes and recovery time
/// Sixteen touchpad multi-functional buttons that
Cost Efficient Cooking
With the National Controls TNC-T9010-010
programmable cooking timer, inefficient frying or
cooking operations will become a thing of the
past. Not only is this timer versatile in its ability to
cook any food temperature, but it is the only
timer on the market that actually shows kitchen
workers what to do. The function/time display will
give you consistent cooking quality, while also
making training a simple task. Together with its
wide range of cooking times, in-the-field
programming, the TNC-T9010-010 timer gives
the restaurant owner maximum flexibility, reduced
operating cost, and easy operation.
control all functions in OPERATE and PROGRAM
modes
/// Red LEDs above each multi-functional button show
which OPERATE or PROGRAM mode is being
performed
/// Multi-channel operation
/// Field-programmable time parameters
/// Push-button review of all cooking parameters
/// Self-test mode function
/// Field menu expansion through chip replacement
/// Easily readjusts to factory pre-set parameters
/// Microprocessor-based electronics with power
failure protection of memory
/// Heavy-duty stainless-steel construction
/// Mounting brackets included
Cook Times Field Programmable
Cook times can be programmed very easily in the
field. This allows the customer to adjust times for
best product taste and appearance. All standard
times are loaded into an EPROM memory chip
before leaving the factory. This chip is easily
replaceable should new products need to be
added in the future.
National Controls Corporation
1725 Western Drive • West Chicago, Illinois 60185
Toll Free: 1-800-323-2593 • Direct: 630-231-5900 • Fax: 630-231-1377
E-mail: ncc@nationalcontrols.com • Web site: www.nationalcontrols.com
© 2005, by AMETEK, Inc. All rights reserved. 1M905CW (240014)
Sixteen Channel
Programmable Timer
Multi-function Food Product Timers
3.375
(8.6)
14.0
(35.5)
READY
READY
5.0
(12.7)
4.375
(11.1)
inches
(cm)
Operating Specifications
Operating Voltage: 105-135 VAC, 50/60 Hz
Power Consumption: 20 watts; auxiliary outlet 500 watts maximum
Display: Two 16-character rugged alpha-numeric, vacuum fluorescent, dot matrix displays
Timing Accuracy: 1%
Audio Alert: 180db ± 5db at 3.2 KHz, 2' from speaker
Maximum Menu List: 50 items, with four functions per item
Number of Timing Cycles: Selectable for 2 or 16 channels
UL Listed: Number-E53595, CSA Listed: Number-LR35326
Dimensions
Free-Standing: W-14" x H-5" x D-3.375" (35.5 cm x 12.7 cm x 8.6 cm)
WARRANTY
National Controls Corporation warrants its products for a period of one (1) year from date of receipt by user, but in no event more than
eighteen (18) months from date of manufacture, against defective material or workmanship, but not against damage caused by accident,
abuse, faulty installation, or improper application or operation. During this period, National Controls will, at its option, repair or replace
defective products returned, transportation charges prepaid, to its factory. National Controls shall not be liable for any indirect or
consequential damages. To the extent permitted by law, this warranty is given in lieu of all other warranties expressed or implied, and
National Controls neither assumes nor authorizes any person to assume for it any liability beyond that stated herein.
COOKING TIMERS AND COMPUTERS EXCHANGE PROGRAM
National Controls Corporation offers a special exchange program to minimize “down time” in the event of product failure. Simply call our
toll free number (800-323-2597) and we will send a replacement unit to you immediately if available. If we do not have stock, we will place
an exchange order and ship your unit as soon as one becomes available. Express (overnight or second-day) shipping charges will be at
the expense of the customer. Upon receipt of the exchange unit, immediately return the defective unit to NCC via prepaid UPS, using the
packing materials and carton in which the exchange unit was sent to you. If the unit is still in warranty, you pay nothing. If the unit is not
in warranty, you will be billed for nominal repair charges (including standard ground shipping and handling) to repair and refurbish the
defective unit. If the defective unit is not returned within 14 days, you will be invoiced at full price for the exchange unit. We repair and
refurbish the defective unit to “like new” condition. You keep the exchange unit, and the refurbished unit goes into our special exchange
stock. This service is available at no additional cost to those customers in the continental United States who are registered with National
Controls and whose account is current.
National Controls Corporation
1725 Western Drive • West Chicago, Illinois 60185
Toll Free: 1-800-323-2593 • Direct: 630-231-5900 • Fax: 630-231-1377 • E-mail: ncc@nationalcontrols.com • Web site: www.nationalcontrols.com
© 2005, by AMETEK, Inc. All rights reserved. 1M905CW (240014)