COURSES AND ENTRY REQUIREMENTS FOR DPP GRADUATES

advertisement

COURSES AND ENTRY REQUIREMENTS

FOR DPP GRADUATES

Applicable to DPP graduates attaining the following ITE qualifications:

-

Higher Nitec in Mechanical Engineering

To be eligible for consideration for admission to the various polytechnic courses offered under the

Direct Entry Scheme to Polytechnic Programme (DPP)

, you must achieve, in your Higher Nitec course under the DPP, the qualifying Grade

Point Average (GPA) or the minimum

RAW

GPA (excluding CCA bonus points) for the different course durations as shown in

Table 1

below.

For Higher Nitec DPP courses in

Applied Sciences, Engineering and Info-Communications Technology

, in addition to the minimum qualifying GPAs, students are required to offer and pass a Math elective at ITE to be eligible for progression into polytechnic Diploma courses under the DPP. N(A) students with at least Grade C6 in GCE ‘O’ Level

Mathematics will be exempted from this requirement.

You may also consider applying for polytechnic courses other than those offered under the DPP, provided you must achieve, in your Higher Nitec course, the minimum

NET

Grade Point Average (GPA) (including CCA bonus points) for the different polytechnic course durations as shown in

Table 2

below.

Some polytechnic courses also have additional prerequisites, in addition to the course entry requirements. You must fulfil the additional prerequisites to be considered for the relevant courses. Please refer to the footnotes, if any, for the additional prerequisites.

Table 1 - Eligibility Criteria For Admission To Polytechnic Courses Offered Under The DPP

Polytechnic Course Offered

By

Course

Code

Minimum GPA for entry to the following course durations

2.0

Years

2.5

Years

3.0

Years

-

3.5

-

-

2.5

2.5

Refer to footnote

Aerospace / Mechatronics Programme

Automation & Mechatronic Systems

Mechanical Engineering

Mechanical Engineering

Mechatronics and Robotics

Mechatronics Engineering

Mechatronics/ Aerospace Engineering

NYP

NP

NP

SP

SP

NYP

TP

C40

N50

N41

S91

S73

C87

T06

3.5

3.5

3.5

3.5

-

-

-

-

-

-

2.5

2.5

2.5

-

2.5

Table 2 - Eligibility Criteria For Admission To Polytechnic Courses NOT Offered Under The DPP

c2 n1, n2, n3, n4 n1, n3 s3, s5 s3, s5 c2 t3, t4, t8

Polytechnic Course

3D Interactive Media Technology

Aeronautical & Aerospace Technology

Aeronautical Engineering

Aerospace Avionics

Offered

By

TP

NYP

SP

RP

Course

Code

T49

C51

S88

R20

Minimum GPA for entry to the following course durations

2.0

Years

-

-

3.5

-

2.5

Years

-

-

-

-

3.0

Years

2.5

2.0

2.0

2.0

Refer to footnote t2, t4 c1 s2, s3, s5 r1, r3, r4, r6

Page 1 of 6

Polytechnic Course

Aerospace Engineering

Aerospace Engineering

Aerospace Technology

Arts and Theatre Management

Aviation Management

Big Data Management & Governance

Bioengineering

Biomedical Engineering

Business Applications

Business Information Systems

Business Intelligence & Analytics

Civil Engineering with Business

Clean Energy Management

Common Engineering Programme

Computer Engineering

Computer Engineering

Cyber & Digital Security

Design for User Experience

Digital & Precision Engineering

Digital Forensics

Electrical & Electronic Engineering

Electrical & Electronic Engineering Programme

Electrical and Electronic Engineering

Electrical Engineering

Electronic & Computer Engineering

Energy Systems & Management

Engineering Systems

Engineering Systems and Management

Engineering with Business

Engineering with Business

Environmental Science

Financial Business Informatics

Game Design

Game Design & Development

Green Building & Sustainability

Green Building Energy Management

Health Management and Promotion

Health Services Management

Hotel & Leisure Facilities Management

Hotel & Leisure Facilities Management

Industrial and Operations Management

Industrial Design

Infocomm Security Management

Information Technology

Information Technology

Integrated Events & Project Management

Integrated Facility Management

Interactive and Digital Media

IT Service Management

RP

TP

NP

RP

RP

TP

SP

NYP

RP

RP

TP

SP

NP

RP

NP

NP

SP

SP

RP

NYP

SP

RP

TP

RP

TP

TP

RP

SP

TP

TP

RP

NYP

TP

SP

TP

RP

RP

RP

NP

SP

RP

NYP

RP

RP

TP

SP

TP

RP

RP

Page 2 of 6

R43

R45

N40

S95

R11

C83

R55

R12

T30

S50

T28

R31

R23

N43

N44

S45

S33

R54

C41

S42

R29

T17

R35

T58

T29

R41

S53

T13

T15

R36

C62

T55

S99

T05

R50

R40

T51

N65

R25

R39

T60

S58

C71

R18

R13

T57

S68

N84

R42

Offered

By

Course

Code

Minimum GPA for entry to the following course durations

2.0

Years

2.5

Years

3.0

Years

- -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.5

3.5

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Refer to footnote

2.0

2.0

2.0

2.0

2.5

2.0

2.5

2.5

2.0

2.5

2.0

2.5

2.0

2.0 r1, r3, r4 r1 r1, r9 t1 t4 r1, r3, r4, r6

2.0

2.0 r1, r3 r1, r3

2.0 n1, n2, n3

2.0

2.0

2.0

2.0

2.0 r1, r3, r4 c2 r1 r1 t4 r1, r3, r6 r1

2.0 r1, r3, r4, r6 t2, t3, t4 2.5

2.0

2.0

2.0

2.5

2.0

2.0

2.0

2.0

2.5 n1, n2, n3, n4 r1, r9 r1, r3, r4 t1 s3, s5 c9 r1 r1 t1

2.0 s3

2.0 n1, n2, n3

2.0 r1, r3, r4, r6, r7

2.0

2.5

2.5

2.0 s4 t1, t3, t4 t1 r1, r9

2.0

2.5

2.0

2.5

2.0 t1 s1 t3, t4, t8 r1, r3, r4, r6

2.0 n1, n2

2.0 n1, n2, n4

2.0

2.0 s2 s1

Polytechnic Course

Marine & Offshore Technology

Marine Engineering

Maritime Business

Materials Science

Media Production and Design

Mobile & Network Services

Mobile Software Development

Nanotechnology & Materials Science

Outdoor and Adventure Learning

Product & Industrial Design

Product Design & Innovation

Sonic Arts

Supply Chain Management

Offered

By

Course

Code

NP

SP

SP

RP

RP

TP

RP

NYP

RP

TP

NP

RP

RP

N42

S63

S74

R17

R19

T42

R47

C50

R33

T35

N68

R24

R21

Minimum GPA for entry to the following course durations

2.0

Years

2.5

Years

3.0

Years

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Refer to footnote

2.0 n1, n3, n4

2.0 s1, s3

2.0

2.0 r1

2.0

2.5

2.0

2.0

2.0 r1, r9 t1 r1 r1, r3, r4, r5

3.0

2.0

2.0

2.0 t2, t3, t4 n1 r1, r3, r9 r1, r3, r4

Page 3 of 6

Footnotes

c1 c2 c5 c9 r3 r4 r5 c6 c7 c8 n1 n2 n3 n4 n5 n6 n7 n8 r1 r2

Applicants applying these courses must ensure that they do not suffer from either colour vision deficiency or hearing deficiency.

Applicants applying for these courses must ensure that they do not suffer from colour vision deficiency.

Admission to the 3-year programmes with module exemptions for relevant modules will be granted to applicants with good GPA.

Note for 2.5 years Nursing course : Course will commence in April if there are sufficient number of candidates.

Note for 2.5 years Nursing course : Exemption from Semester 1 of year 1 for those with GPA of > 3.5.

Applicants with colour vision deficiency will be required to attend an interview to determine their suitability for admission to the course.

All Higher Nitec graduates applying for Direct Entry to Year 2 must pass ITE Bridging Mathematics programme

(BM1) or obtain at least a C6 grade in GCE ‘O’ level Mathematics.

Applicants with severe vision deficiency should not apply for these courses.

Applicants must ensure that they do not suffer from colour vision deficiency. For N40, N43, N44, N50, N55,

N74, N76, N84 and N92, applicants with colour vision deficiency may be considered subject to an in-house test.

Applicants must ensure that they do not suffer from hearing deficiency.

For those with GPA of > 3.5, admission will be to the 3-year programmes with module exemptions for relevant modules in which a n applicant has scored at least a ‘C’ grade in the ITE examinations. Module exemptions will be at the discretion of the Polytechnic.

Those with GPA of > 3.5 may be granted direct entry to the 2nd year of a 3-year course provided that they passed Bridging Maths 1 (BM1) programme at ITE or obtained at least a C6 grade in GCE ‘O’ Level

Mathematics.

Applicants have to pass a medical examination and must be free from physical handicap.

Entry to first year with exemption of first 6 months in Year 1 for those with GPA of > 3.5 (Course commences in

Semester 2). Entry to Year 1 Semester 1 with no exemption for those with 3.0 < GPA < 3.5.

Applicants granted direct entry to Year 2 of the Marine & Offshore Technology course (N42) are required to take a Year 1 module, Fundamentals of Naval Architecture 2.

Applicants with severe vision deficiency should not apply for these courses. All successful applicants are required to pass a pre-admission medical examination to ensure suitability for the posted course. Applicants may be assessed on a case-by-case basis to verify the severity of the conditions to determine suitability for the course.

This course will demand from students a considerable amount of involvement in water based activities. As such, students should be able to show confidence in water related activities.

Applicants with hearing deficiency should not apply for these courses.

For safety reasons, applicants applying for these courses must ensure that they do not suffer from epilepsy.

Due to the nature of the outdoor and adventure learning job requirements, candidates seeking admission into the

Diploma in Outdoor and Adventure Learning (DOAL) should enjoy working with youth in the outdoor environment consisting of natural and adventurous elements. The course will demand from students a substantial amount of involvement in physical activity and water based experiential activities. As such, having an affinity for the outdoors and adventure pursuits will be advantageous. Additionally, students should be able to show confidence in water whilst donning a personal flotation device.

For information on the medical conditions to be examined for admission to DOAL, please refer to http://www.rp.edu.sg/Diploma_in_Outdoor_And_Adventure_Learning_(R33).aspx

.

Page 4 of 6

t4 t5 s1 s2 s3 t1 t2 t3 r6 r7 r8 r9 r10 s4 s5

Applicants with colour appreciation deficiency should not apply for these courses.

Common Engineering Programme allows a student to take a common course of study in the first semester and will subsequently be streamed into one of the following Engineering diplomas:

• Aerospace Avionics

• Aerospace Engineering

• Aviation Management

• Electrical and Electronic Engineering

• Engineering Systems and Management

• Green Building Energy Management

• Industrial and Operations Management

• Supply Chain Management

Students enrolled in this diploma will have to produce documentary proof of school representation in sports recognised by the Singapore Schools Sports Council or its equivalent at point of enrolment.

Applicants with colour appreciation deficiency may apply for and be admitted into these courses if determined suitable at an interview.

All DPP graduates applying to year 2 of the courses must pass ITE Bridging Maths 1 (BM1) or obtain at least a

C6 grades in O Level maths.

Applicants must ensure that they do not suffer from colour vision deficiency.

Applicants must ensure that they do not suffer from either colour vision deficiency or hearing deficiency.

Applicants suffering from epilepsy will be required to submit a medical report from a Designated Workplace

Doctor who will assess their fitness for the posted courses.

Applicants suffering from impairments must be prepared to appear for interviews and to undergo any manual dexterity or aptitude tests.

Those with GPA of 3.5 or more and passed the Bridging Maths 1 (BM1) programme, or have obtained at least

C6 grade in GCE ‘O’ Level Mathematics, may be admitted to the 2nd year of the 3-year course.

Applicants with complete Colour Vision Deficiency are not eligible to apply.

Applicants with partial or complete Colour Vision Deficiency are not eligible to apply.

For safety reasons, applicants applying for these courses must ensure that they do not suffer from medical conditions such as uncontrolled epilepsy or profound hearing loss.

Applicants with severe vision impairment are not eligible to apply.

In addition to satisfying the Fitness requirement at the Polytechnic’s pre-enrolment medical examination and medical requirements of other regulatory authorities (if applicable), applicants offered a place in T54 (Diploma in Early Childhood Studies) must also be free from physical disabilities.

Whilst not comprehensive, the following medical conditions may lead to non-acceptance into the Early

Childhood Studies course:

Mobility restricted Uncontrolled asthma Acquired Immune Deficiency

Syndrome (AIDS)

Active tuberculosis Uncontrolled diabetes Physical dependence upon mobility equipment

Profound deafness Uncontrolled epilepsy HBsAg positive / Hepatitis B

Carrier

Legal Blindness Psychiatric condition Uncontrolled hypertension

Page 5 of 6

t6 t7 t9 t8

The first year in T01 (Business/Logistics & Operations Management/Marketing) is common to all students and they will opt for one of the diplomas (i.e. Diploma in Business, Diploma in Logistics & Operations Management, or Diploma in Marketing) at the end of Year 1.

Applicants applying for T09 (Diploma in Law & Management) must also possess at least a B4 grade in English

Language (EL1) in the GCE O Level/SPM examinations.

The first semester in the following courses is common to all students and they will opt for one of the diplomas at the end of Semester 1 or 2. Students must ensure that they satisfy the requirements as stated in the footnotes under the respective courses.

Electrical & Electronic Engineering Programme (T05):

Diploma course

Diploma in Aerospace Electronics

Diploma in Computer Engineering

Refer to footnote t2, t3, t4 t1, t3, t4

Diploma in Electronics

Diploma in Media & Communication Technology

Diploma in Microelectronics

Mechatronics/ Aerospace Engineering (T06):

Diploma course

Diploma in Aerospace Engineering

Diploma in Mechatronics t1, t3, t4 t1, t3, t4 t1, t3, t4

Refer to footnote t2, t3, t4 t1, t3, t4 t10

For entry to Year 2 of the following courses, applicants applying through the Joint Polytechnic Admissions

Exercise (JPAE) are to select the respective polytechnic course code as indicated in the bracket below:

• Diploma in Computer Engineering (T132)

• Diploma in Electronics (T052)

• Diploma in Media & Communication Technology (T122)

• Diploma in Microelectronics (T142)

• Diploma in Mechatronics (T062)

Applicants applying for entry to Year 2 of the courses must also pass ITE Bridging Mathematics 1 (BM1) or obtain at least Grade C in GCE ‘O’ Level Mathematics.

Page 6 of 6

Download