Pole Basics
Table of Contents
Available Steel Poles................................................................................................Page 1
Available Aluminum Poles ............................................................................Page 2
Pole Top Preparations for Steel & Aluminum................Page3
Bolt-on Brackets .............................................................................................................Page 4
Tenon Mount Brackets.........................................................................................Page6
Accessories .............................................................................................................................Page 7
Fixture Specific Brackets...................................................................................Page 8
Internal Slip Fitter/Hand-Hole Covers/Pole Caps......Page9
Steel Pole Base Covers........................................................................................Page 10
Available Pole Base Covers ......................................................................... Page 11
Steel Pole Anchor Bolts.......................................................................................Page 12
Steel Pole EPAs/Wall Mount Brackets........................................Page 13
Aluminum Pole EPAs..............................................................................................Page 14
Aluminum Pole EPAs..............................................................................................Page 15
Wind Speed Map...........................................................................................................Page 16
Available Steel Poles
Pole Basics
STEEL ROUND POLES (RP)
STEEL SQUARE POLES (SQ)
STEEL ROUND TAPERED POLES (RTP)
Steel Pole Shaft Preparations (Optional)
OS Occupancy Sensor
Preparation (Optional)
Available on all Above Poles
3"
(76mm)
3"
(76mm)
6"
(152mm)
For use with
PMOS Occupancy
Sensor
6"
(152mm)
HAND-HOLE
Square Poles
OPTIONAL
BASE COVER
Round and
Round Tapered
Poles
Steel Pole Shaft Preparations (Optional)
Flood Light Preparation (Optional)
Available on all Above Poles
For use with
FBO Brackets
Square Poles
PROJECTION
12"
(305mm)
STANDARD
(4)
ANCHOR
BOLTS
GROUND LEVEL
FOUNDATION
BY OTHERS
© LSI Industries Inc.
3305
1
Round and Round
Tapered Poles
Available Aluminum Poles
Pole Basics
ALUMINUM SQUARE (SOFT CORNER) POLES (SQ)
ALUMINUM ROUND POLES (RP)
ALUMINUM FLUTED ROUND POLES (FRN)
Aluminum Round
ALUMINUM ROUND TAPERED POLES (RTP)
ALUMINUM ROUND HINGED BASE POLES (RHP)
Aluminum Square (Soft Corner)
Aluminum Round Tapered
8'-35'
(2.4m - 10.7m)
8'-20'
(2.4m - 6.1m)
18'-30'
(5.5m - 9.1m)
Hand-hole
Nut
Covers
Hand Hole Heights
4" (102mm) = 12"
(305mm) Standard
Hand-hole
12"
(305mm)
Standard
5" (127mm) = 14"
(356mm) Standard
Nut
Cover
Discs
Hand-hole
6" (152mm) = 18"
(457mm) Standard
Nut
Covers
Aluminum Round Hinged Base
12” (305mm) for
5” Pole Bottom
18"(457mm) for
6”, 8” or 9” Pole Bottom
Aluminum Fluted Round with Decorative Base
Shipped standard without
Hand-hole. Optional Hand-hole
available.
FRN2
FRN3
FRN2, FRN3 –
N = 2-3/8" (60mm) O.D.
x 4" (102mm)
Tall Tenon
8'-20'
(2.4m - 6.1m)
4N = 4" (102mm)O.D.
x 5" (127mm)
Tall Tenon
8'-18'
(2.4m - 5.5m)
Cross Section
16 Flat Flute
Round Hinged
Base
21-1/2”
(546mm)
Nut
Covers
31-1/2”
(800mm)
FRN2 Access Door
4" wide x 5-5/8" tall
(102mm x 143mm)
Aluminum 2-Piece
Cast Base Cover
(Standard)
17” Dia.
(432mm)
Aluminum Pole Shaft
Preparation (Optional)
Festoon preparation
for FP & PG options
Not available on fluted poles
© LSI Industries Inc.
3305
17” Dia.
(432mm)
2
FRN3 Access Door
3-1/4" wide x 16-1/2" tall
(83mm x 419mm)
Pole Top Preparations for Steel & Aluminum
Pole Basics
Bolt-on Drilling Pattern
5” (127mm) Traditional Drilling Pattern
3” (76mm) Reduced Drilling Pattern
Tenon Mount
4RPN
5RPN
4SQN
5SQN
6SQN
RTPN
4RHPN
5RHPN
4FRN2
4FRN3
5FRN2
5FRN3
6FRN2
6FRN3
4RPB5
5RPB5
4SQB5
5SQB5
6SQB5
RTPB5
4RHPB5
5RHPB5
4RPI
5RPI
4SQI
5SQI
4RHPI
5RHPI
Steel Poles
N = 2-3/8” O.D.
(60mm)
X
4-3/4” tall (121mm)
Aluminum Poles
N = 2-3/8” O.D.
(60mm)
X
4” tall (102mm)
3305
2X 9/16” - 7/8” SLOT
1-1/16”
(27mm)
3-1/2”
(89mm)
2-1/8”
(54mm)
Ø 5/8”
5RPN
5RHPN
4FRN2
4FRN3
5FRN2
5FRN3
6FRN2
6FRN3
Steel Poles
4N = 4” O.D.
(102mm)
X
4-7/8” tall
(124mm)
Aluminum Poles
4N = 4” O.D.
(102mm)
X
5” tall (127mm)
No Drilling without Pole Cap
RPI - For use with
Lifestyle UCLS and
UCL D180 Brackets
SQI - For use with internal
Slip-fitter Bracket
© LSI Industries Inc.
3/4” DIA. HOLE
4-5/8”
(117mm)
1-1/2”
(38mm)
4RPB3
5RPB3
4SQB3
5SQB3
4RHPB3
5RHPB3
No Drilling with Pole Cap
9/16” DIA. HOLES
(TYP. 2 PLCS.)
2-1/2”
(64mm)
4RPSF
4RHPSF
3
For use with Lifestyle Classic Hook
(CH) mounting and Constitution,
Enterprise, and Lexington Post Top
(PT) single mounting styles
Bolt-on Brackets
Pole Basics
SQB5, RPB5, RTPB5, RHPB5 - For Use with 5” (127mm) Traditional Drill Pattern
2-1/2" x 5-3/8" x 6"
(64mm) x (127mm) x152mm)
2-1/2" x 5-3/8" x 8"
(64mm) x (127mm) x152mm)
2-1/2" x 5-3/8" x 12"
(64mm) x (127mm) x152mm)
BKA BO S (6, 8, or 12) CLR R
Aluminum Mounting Arm
Not for use with XSB, Patriot, Hilton or XLCL.
(Round pole applications use RPP2)
6" Part # 16196601CLR
8" Part # 16196604CLR
12" Part # 16196602CLR
2-1/2" x 5-3/8" x 6"
(64mm) x (127mm) x152mm)
BKA HRBO S 6 CLR
Aluminum Mounting Arm
Use with Hilton II on round poles
Part # 168414CLR
BKS BO PA 40 CLR - Parallel Arm
1 piece steel 5" (127mm) traditional drill
pattern designed for direct mounting of
fixture to face of bracket. Standard arms
are not required except for Hilton Series.
Part # 141028CLR
RPP2 BLK - Round Pole Plate
Part # 162914BLK
6"
(152mm)
6"
(152mm)
BKA BO EC 6 CLR
Aluminum extension bracketUse with Patriot.
Part # 142862CLR
(Round pole applications require RPPC)
BKA BO ADJ 6 CLR - Adjustable Bracket
Aluminum 5" (127mm) traditional drill
pattern (both sides)- Standard arm is not
used. Cannot be used with top-access
fixtures, Patriot, XSB or XLCL. For use with
square pole only.
Part # 130526CLR
BKU BO S 19 CLR - Upsweep Arm
3 piece aluminum 5" (127mm) traditional
drill pattern- Compatible with Patriot .
Part # 144191CLR
BKA BO RA 8 CLR - Radius Arm
For Challenger Medium, Patriot, and all square and
rectangular fixtures. Not for use with XSB or XLCL.
Part # 169010 CLR
RPPC CLR - Round Pole Plate
For Patriot
Part # 141940CLR
SQB3, RPB3, RHPB3 - For Use with 3” (76mm) Reduced Drill Pattern
BKA-XBO-EC-6-CLR
EXTENSION ARM - Aluminum 3" reduced drill
pattern. Use this 6" extension arm to position
the fixture further from the pole. Not for use with
Mirada Series or decorative area ligts.
Part #382136CLR
X4RPP CLR - Round Pole Plate
For 4" Round Poles
Part # 379967CLR
X5RPP CLR - Round Pole Plate
For 5" Round Poles
Part # 379968CLR
Drilling Locations
Fixture Configurations
Side
“C”
Hand-hole
Single
Side
Side
D180°
“D”
“B”
D90°
T90°
TN120°*
Side
“A”
Q90°
(Hand-hole Side)
Note: Consult factory for custom variations. Standard SF
Single FBO(SF)
and DF pole preparations are located 3/4 of the height of
the pole from the base, unless otherwise specified. (Except Double FBO(DF)
on 20' Round Tapered pole -Maximum height for SF & DF
is 13' from base.)
© LSI Industries Inc.
3305
A
X
X
Sides
B
C
Single
X
X
X
X
X
X
D
X
X
D90
DN90
Parallel
D180
X
X
X
X
X
X
X
*Other two locations will be 120° to the left and right of Side A.
4
T90
TN120
QN90
Q90
Bolt-on Brackets
Pole Basics
Retrofit Bolt-On Brackets
Use to convert poles with existing 5” (127mm) Traditional 2-hole, 3-hole and 4-hole LSI drilling patterns to use with fixtures with
3” (76mm) reduced drill pattern.
BKS-XBO-ADP-2H-CLR - To convert 2-hole
5” traditional LSI drilling pattern on round
or square poles.
Part Number 388239CLR
5-9/16” x 2-5/8”
(141mm x 67mm)
BKS-XBO-ADP-3H-CLR - To convert
3-hole LSI drilling pattern on square
poles.
Part Number 388059CLR
4-1/2” x 3-3/4”
(114mm x 95mm)
BKS-XBO-ADP-2H-CLR-EC6 - To convert
2-hole 5” traditional LSI drilling pattern.
Includes 6" extension arm and proper
hardware for use with round or square poles.
Part Number 388241CLR
Mounting Bracket w/EC6 Arm
BKS-XBO-ADP-4H-CLR - To convert 4-hole LSI
drilling pattern on square poles.
Part Number 388060CLR
4-3/4” x 3-3/4”
(121mm x 95mm)
When ordering adaptors for 3- and 4-hole drilled square poles, ordering a replacement cap is also recommended due to the aging of the existing
plastic pole cap.
Flood Brackets - For use with SF & DF pole shaft preparations
4-3/4"
(121mm)
18-7/8"
(479mm)
30"
(762mm)
BKS FBO 18 * CLR
Part # 107053CLR
BKS FBO 5 * CLR
Part # 107054CLR
Mounting Hole Plugs & Decal
Front Side
Mounting Hole Plugs
Set of 3 for square pole with
5” traditional drill pattern.
Part # 132336
© LSI Industries Inc.
3305
Mounting Hole Decal (MHD)
Available for round & round
tapered poles and square poles
with 3” reduced drilling pattern.
Part # 340120
5
BKS FBO 30 CLR
Part # 133163CLR
Tenon Mount Brackets
Pole Basics
SQN, RPN, FRN, RHPN, RTPN with N Tenon
(2 3/8” (60mm) O.D. x 4 3/4” (121mm) or 4” (102mm) tall)
Tenon Mount Fitters with 5” (127mm)
Traditional Drill Pattern
10-3/4”
(273mm)
Single/D-180
(Drilled 2 Sides)
Tenon Mount Fitters with 3” (76mm)
Reduced Drill Pattern
11”
10-3/4”
(273mm)
D90/T90/Q90 (279mm)
(Drilled 4 Sides)
BKA NM * CLR
For flat surface brackets.
Single/D180 - Part # 43549CLR
D90/Q90/T90 - Part # 43548CLR
BKA RNM TN120 * CLR
Drilled 3 sides at 120°.
For radius surface brackets.
Part # 107023CLR
BKA XNM-S or D180- * CLR
Single/D-180
(Drilled 2 Sides)
Consult factory for part numbers
Tenon Mount Adjustable with 5”
(127mm) Traditional Drill Pattern
Tenon Mount Parallel Arm with 5”
(127mm) Traditional Drill Pattern
2" (51mm) x 8" (203mm) x 40" (1016mm)
BKA NM ADJ * CLR
Aluminum round slipfitter for 2-3/8"
9-3/4" (60mm) O.D. or 2-7/8" (73mm) O.D.
(248mm) tenon - should not be used with
standard arm. Cannot be used with
top-access fixtures,XLCL, XSB,
Patriot, or Hilton Series.
Part # - 130527CLR
Thru bolt
BKA XNM-D90, T90 or Q90- * CLR
D90/T90/Q90
(Drilled 4 Sides)
Tenon Adaptor
BKS NM PA 40 CLR
One piece steel arm, round slipfitter for 2 3/8"
(60mm) O.D. tenon. Designed for direct mounting
of fixtures to face of bracket. Standard arm is not
required, except for Hilton Series.
Part # - 143888CLR
Flood Brackets - Used with tenon mount poles
17"
(432mm)
17"
(432mm)
17"
(432mm)
17"
(432mm)
17"
(432mm)
30" (762mm)
30"
(762mm)
2"
(51mm)
PIPE
2"
BKS-PTB-2-CLR (51mm)
Part# 107066CLR
PIPE
48"
(1219mm)
BKS-PTB-3-CLR
Part# 107070CLR
2"
(51mm)
PIPE
30"
(762mm)
BKS-PTB-3-30-CLR
Part# 133505CLR
2"
(51mm)
PIPE
BKS-PTB-4-CLR
Part# 123109CLR
24"
(610mm)
BKS-PTB-13-3-CLR
Part# 137107CLR
BKS-PTB-12-CLR
Part# 137105CLR
BKS-PTB-14-CLR
Part# 137108CLR
Tenon Mount Mast Arm
4’, 6’, 8’ Nominal
8’,12’, 16’ Nominal
BKA PTB Mast Arm 4 S CLR
BKA PTB Mast Arm 4 D180 CLR
BKA PTB Mast Arm 6 S CLR
BKA PTB Mast Arm 6 D180 CLR
BKA PTB Mast Arm 8 S CLR
BKA PTB Mast Arm 8 D180 CLR
10”
(254 mm) 32”
(813 mm)
10”
(254 mm)
Single
Mast Arm Adaptor
For use with existing mast arm by others. Cannot be used
with XSB, Hilton Series. Slipfits 2” pipe [2-3/8” (60mm) O.D.]
Part # 168778CLR
3305
Part#
409570CLR
409571CLR
409572CLR
409573CLR
409574CLR
409575CLR
LSI Mast Arm: Available in 4’, 6’ and 8’ nominal arm lengths with single (S) and
double arms at 180º (D180) mounting configurations. All arms have a 32” rise.
D 180
Mast Arm Adaptor with 5” (127mm)
Traditional Drill Pattern
BKA NM MA 5 CLR
© LSI Industries Inc.
17"
(432mm)
6
BKA NM MA 5 XLCL CLR
Mast Arm Adaptor
For use XLCL
Part # 617865CLR
Accessories
Pole Basics
Tenon Reducers
P/N
Description
137096CLR BKS-NM-RD-2.5-CLR
137093CLR BKS-NM-RD-3.0-CLR
137090CLR BKS-NM-RD-3.5-CLR
NM-RD
Steel round slipfitter reducer, comes
with set screws and one through bolt.
NOTES:
Part description refers to pipe size.
Top tenon is 2” pipe or
2-3/8" (60mm) dia. x 4-3/4" (121mm) high.
I.D.
3.068"
3.640"
4.140"
O.D.
3.5"
4.0"
4.5"
Fits
2.875" O.D.
3.5" O.D.
4.0" O.D.
How Much Play
2-5/8" to 2-7/8"
3-1/4" to 3-1/2"
3-3/4" to 4"
How Much Play = For the in between sizes of their
tenon, you have about 1/4" (6mm) play.
Fits = Customer's existing tenon size.
Banner Brackets for use with Straight Round Poles
1.50 Ø (38mm)
Single Side Double Bracket Assembly
BBKS 4R S 18, 24, 30 CLR Consult factory for part numbers
BBKS 5R S 18, 24, 30 CLR Consult factory for part numbers
18” (457mm),
24” 610mm),
or 30” (762mm)
D180 Double Bracket Assembly
BBKS 4R D 18, 24, 30 CLR Consult factory for part numbers
BBKS 5R D 18, 24, 30 CLR Consult factory for part numbers
SITE
SPECIFIC
4”.00 Ø (102mm) or 5”.00 Ø (127mm) O.D. Pole
Special EPA calculations are required on banner bracket applications, consult factory.
Vibration Damper for use with Steel Square Poles - Bolt-on Mount
4’ (102mm) and 5’ (127mm) square pole dampers supplied with (2) 15’ (4.6M) vinyl coated chains
6” (152mm) square pole dampers supplied with (2) 20’ (6.1M) vinyl coated chains
Poles vibration dampers are designed to reduce the amounts of vibration
incurred in certain poles. They are not intended to eliminate vibration altogether.
Kit VIBR DMPR 4SQ Pole
Part # 172539
Kit VIBR DMPR 5SQ Pole
Part # 172538
Kit VIBR DMPR 6SQ Pole
Part # 178361
© LSI Industries Inc.
3305
7
Fixture Specific Brackets
Pole Basics
Brackets for use with LSI Practica Small (PLCS)
Improper use of brackets will void warranty
BKS-XBO-WM-*-CLR
2-bolt pattern steel wall mount plate to use with
3” (76mm) reduced drill pattern.
Part # 382132CLR
BKS-BO-WM-W/BKS-FBO-5-CLR
2-bolt pattern steel wall mount plate and FBOE
bracket with BKAXNM-PLCS-ADJ bracket for use
with PLCS only.
Part # 628675CLR
If BKA-XNM-PLCS-ADJ is required for wall mount
application, BKS-BO-WM-W/BKS-FBO-5-CLR
bracket is required
BKA-XNM-PLCS-ADJ-*-CLR
Tenon slipfitter bracket titable up to 90º. Fits 2”
pipe (2 3/8” O.D.) tenon.
Part # 626315CLR
Not compatible with XLCS, XLCM, XLCL.
SPL-PLCS-BKS-NM-4ISF-*-CLR
Part # 630804CLR
SPL-PLCS-BKS-NM-5ISF-*-CLR
Part # 630808CLR
Bracket adapts open topped 4” (102mm) or 5” (127mm)
square pole to have a 2” pipe (2 3/8” O.D.) tenon.
Brackets for use with XLCS, XLCM & PLCS only
Pole Quick Mounts with Universal Mounting Plate for one person installation.
Can mount to LSI’s and most competitor's drilling patterns. For use with square poles & BKA NM tenon adaptors only.
15° Angle – PQM15
Allows 15° uptilt of fixture
for greater throw of light
with increased vertical
illumination
o
15
Horizontal - PQMH
Note: When mounting to a non-LSI drilling pattern, the original
nut plate must be retained for use with bracket.
PQMH-KIT-CLR Square Pole Quick Mount Horizontal Bracket
582328CLR
PQM15-KIT-CLR Square Pole Quick Mount Bracket w/fixed 15º Angle 582329CLR
Adjustable Brackets for use with XRSU, XRMU and PRSU Roadway Fixtures
10-5/16"
(262mm)
Bolt-On
BKA-BO-XRSU/XRMU/PRSU-ADJ-CLR
for poles with 5” traditional drill pattern
Part # 530070CLR
10-1/16"
(256mm)
© LSI Industries Inc.
8-15/16"
(227mm)
3305
8
13-11/16"
(348mm)
Tenon Mount
BKA-NM-XRSU/XRMU/PRSU-ADJ-CLR
for poles with 2” pipe - 2 3/8” (60mm) O.D.
Part # 527793CLR
Pole Basics
Internal Slip Fitter/Hand-Hole Covers/Pole Caps
SQI (no drilling)
Internal Slip Fitter Bracket
U.S. Patent # 5,599,094
BKA (4ISF, 5ISF) (Q90, D180) CLR for 5” (127mm) traditional drill pattern
BKA (X4ISF, X5ISF) (D90, D180) CLR for 3” (76mm) reduced drill pattern
Bracket cap
Hole plugs
Utilize to retrofit existing 4" (102mm) & 5" (127mm) square poles.
Use with 4" (102mm) & 5" (127mm) SQI poles with wall thickness
of 11 ga. (0.120) or 7 ga. (0.180).
D180 slipfitters come with (1) set of plugs
Q90 slipfitters come with (2) sets of plugs
* Do not use on round tapered or round poles
Use with 5” traditional drill pattern fixtures
BKA 4ISF D180 * CLR PART# 122625CLR
BKA 4ISF Q90 * CLR PART# 122626CLR
BKA 5ISF D180 * CLR PART# 122627CLR
BKA 5ISF Q90 * CLR PART# 122628CLR
Positioning Rings
Top View
3 1/4" (83mm)
Positioning rings
in lowest threads
Use with 3” traditional drill pattern fixtures
BKA X4ISF D180 * CLR PART# 415635CLR
BKA X4ISF Q90 * CLR PART# 440949CLR
BKA X5ISF D180 * CLR PART# 417508CLR
BKA X5ISF Q90 * CLR PART# 443447CLR
Hand-Hole Cover Kits with Gasket and 2 Screws - Steel Poles Only
6-1/4"
(159mm)
6-1/4"
(159mm)
3-1/4"
(83mm)
6-1/4"
(159mm)
3-1/4"
(83mm)
4-1/4"
(108mm)
Part #349593CLR
Used on all square steel
poles and all round steel
poles 18'-0" (5.5M) and above
except Round Tapered Steel.
6-1/4"
(159mm)
Part #547618CLR
Used on all Round
Tapered Steel Poles.
4-1/4"
(108mm)
Part #53306CLR
Used on all ER2 & GFI options for
all Square Steel Poles, and all Round
Steel Poles 18'-0" (5.5M) and above except
Round Tapered Steel. No receptacle.
5"
(127mm)
7"
(178mm)
6"
(152mm)
3 1/2"
(89mm)
3 1/2"
(89mm)
Part #141062CLR
Used on all 4" (102mm) & 5" (127mm) Round Steel
Poles under 18'-0" (5.5M)
Part #53928CLR
Used on all ER2 & GFI options
for Round Tapered Steel Poles.
No receptacle.
5 3/4"
(148mm)
3"
(76mm)
2 1/2"
(64mm)
Part #5707502CLR
Used on all ER2 & GFI options for 4" (102mm) &
5" (127mm) Round Steel Poles under 18'-0" (5.5M).
No receptacle.
Part #179079
In use cover. Used on all
ER2 & GFI options
Consult factory for aluminum pole hand-hole and GFI covers
Pole Caps - Steel Poles Only
ROUND TAPERED
ROUND
SQUARE
3" 20/25 ft. Part #54018
3-1/4" 30/50 ft. Part #54019
3-1/2" 35/39 ft. Part #54020
4” 45 ft. Part #54015
4" Part #54015
5" Part #54016
4" Part #54008
5" Part #540090
6" Part #54010
Consult factory for aluminum pole caps
© LSI Industries Inc.
3305
9
BOLT-ON TN120
for square pole
4" Part #132029CLR
5" Part #132030CLR
TENON FITTER (BKA RNM)
Part #53460CLR
Steel Pole Base Covers
Pole Basics
Base Covers - Steel Poles - Square shaped base covers are .50 or .63 aluminum
11.318" - 12.313"
(287mm - 313mm) Square
Square Steel Poles
11.318" (287mm) Square
Round Steel Poles
Round Tapered Steel Poles
5" (127mm) SRBC
4.8" (122mm) tall with 5.25"
(133mm) dia. opening
Part #158451CLR
25' (7.6M) SRTBC
11.318" (287mm) sq. x 4.8" (122mm) tall with
6.85" (174mm) dia. opening
Part #158390CLR
4"(102mm) SRBC
4.3" (109mm) tall with 4.25"
(108mm) dia. opening
Part #158450CLR
4"(102mm) BC
11.318" (287mm) sq. x
4.3" (109mm) tall with 4.125"
(105mm) sq. opening
Part #122559CLR
5"(127mm) BC
11.318" (287mm) sq. x
4.8" (122mm) tall with 5.125"
(130mm) sq. opening
Part #122561CLR
9.75”
(248mm)
6"(152mm) BC
12.313" (313mm) sq. x
5" (127mm) tall with 6.125"
(156mm) sq. opening
Part #122563CLR
15"
(381mm)
3305
20' (6.1M) SRTB
11.318" (287mm) sq. x 4.8" (122mm) tall with
6.15" (156mm) dia. opening
Part #158388CLR
30' (9.1M) SRTBC
11.318" (287mm) sq. x 4.8" (122mm) tall with
7.75" (174mm) dia. opening
Part #158392CLR
35' (10.7M) SRTBC
13" (330mm) sq. x 4.875" (124mm) tall with
8.75" (222mm) dia. opening
Part #158554CLR
GBC 4 5
Decorative two-piece die
cast construction fits 4”
(102mm)and 5” (127mm)
diameter straight round
poles. Includes 4” (102mm)
round pole adaptor molded
from black silicone rubber
Part #483859 CLR
© LSI Industries Inc.
11.318" - 14.5" (368mm)
(287mm - 368mm) Square
10
39' (11.9M) SRTBC (7 & 11 Gage)
12.875" (327mm) sq. x 5.5" (140mm) tall
with 9.125" (232mm) dia. opening
Part #155887CLR
45' (13.7M) SRTBC
14.5" (368mm) sq. x 5.875" (149mm) tall with
10.25" (260mm) dia. opening
Part #158571CLR
50' (15.2M) SRTBC
14.5" (368mm) sq. x 5.875" (149mm) tall with
10.25" (260mm) dia. opening
Part #158578CLR
Available Pole Base Covers
Pole Basics
Base Covers - Aluminum Poles
Square Aluminum Pole
Round Aluminum Pole
Square Two-Piece
Cast Base Cover
(Optional)
One-Piece Spun
Aluminum Collar
(Optional)
4DABC - 4" Square Cast 2-Piece Base Cove
13” (330mm) square x 6.31” (160mm) tall
Part # 505605CLR
4RSAC - 4" Round 1-Piece Spun Aluminum Collar
11.875” (302mm) dia. x 5.5” (140mm) tall with 4.125“ (105mm) opening
Part # 506859CLR
5DABC - 5" Square Cast 2-Piece Base Cove
13” (330mm) square x 6.31” (160mm) tall
Part # 505606CLR
5RSAC - 5" Round 1-Piece Spun Aluminum Collar
10.75” (273mm) dia. x 5.5” (140mm) tall with 5.125“ (130mm) dia. opening
Part # 506860CLR
6DABC - 6" Square Cast 2-Piece Base Cove
14.5” (368mm) square x 7.25” (184mm) tall
Part # 505608CLR
9.75”
(248mm)
15"
(381mm)
Part #483859 CLR
Round Tapered Aluminum Pole
Round Hinged Base Aluminum Pole
Base cover ships with pole as a standard
One-Piece Spun
Aluminum Collar
(Optional)
Aluminum 2-Piece
Cast Base Cover
(Standard)
5RSAC - Round 1-Piece Spun Auminum Collar for RTP w/5” bottom
10.75” (273mm) dia. x 5.5” (140mm) tall with 5.125“ (130mm) dia. opening
Part # 505647CLR
Round 2-Piece Cast
Base Cover for 4” (102mm) and 5” (127mm) Round Hinged Base Aluminum Pole
15“ (381mm) dia. x 6” (152mm) tall
4RHDABC
Part # Consult Factory
6RSAC - Round 1-Piece Spun Auminum Collar for RTP w/6” bottom
14” (356mm) dia. x 5.5” (140mm) tall with 6.125“ (156mm) dia. opening
Part # 505648CLR
5RHDABC
Part # Consult Factory
8RSAC - Round 1-Piece Spun Auminum Collar for RTP w/8” bottom
17.125” (435mm) dia. x 5.5” (140mm) tall with 8.125“ (206mm) dia. opening
Part # 505649CLR
© LSI Industries Inc.
GBC 4 5
Decorative two-piece die
cast construction fits 4”
(102mm)and 5” (127mm)
diameter straight round
poles. Includes 4” (102mm)
round pole adapter molded
from black silicone rubber
3305
11
Steel Pole Anchor Bolts
Pole Basics
3/8" X 10" (10mm X 254mm) Galvanized Steel
10" (254mm)
2" (51mm)
Min
3/8" (10mm)
1" (25mm)
Used with: AB kit# 285560 Bollards 4 1/2" (114mm) BOLT CIRCLE.
Each anchor bolt furnished with:
(2) 3/8" (10mm)-16 galvanized hex nuts and
(2) U.S.S. 3/8" (10mm) flat washers 7/16" (11mm)
I.D. x 1" (25mm) O.D. x 0.1" (3mm) thick galvanized
3/4" X 30" Steel / 3/4" X 30" (19mm X 762mm) Galvanized (Partially)
30" (762mm)
Steel used with:
3 1/ 2" (89mm) Min
AB kit# 122584
3/4" (19mm) AB kit# 122582
AB kit# 1225850
AB kit# 135460
3"
(76mm)
4SQ
4RP
5SQ
5RP
STL
STL
STL
STL
S11G/S07G
S10G
S11G
S11G
11" (279mm) BOLT CIRCLE
11" (279mm) BOLT CIRCLE
11" (279mm) BOLT CIRCLE
11" (279mm) BOLT CIRCLE
S11G/S07G
S10G
S11G
S11G
11" (279mm) BOLT CIRCLE
11" (279mm) BOLT CIRCLE
11" (279mm) BOLT CIRCLE
11" (279mm) BOLT CIRCLE
Galvanized used with:
AB kit# 122609
AB kit# 122607
AB kit# 122610
AB kit# 135461
Each anchor bolt furnished with:
(2) 3/4" (19mm)-10 zinc plated or galvanized hex nuts and
(2) U.S.S. 3/4" (19mm) flat washers (13/16" (17mm) I.D. x 2" (51mm)
O.D. x 5/32" (4mm) thick) zinc plated or galvanized
4SQ
4RP
5SQ
5RP
STL
STL
STL.
STL
GAL
GAL
GAL
GAL
1" X 36" (25mm X 914mm) Steel / 1" X 36" (25mm X 914mm) Galvanized (Partially)
Steel used with:
36" (914mm)
4 1/4" (108mm) Min.
1" (25mm)
AB kit# 122586
AB kit# 122583
AB kit# 122587
AB kit# 122588
AB kit# 122589
5SQ.
5RP
6SQ
RTP
RTP
STL
STL
STL
STL
STL
S07G
S07G
S07G
20/25/30' S11G
35/39' S11G
11" (279mm) BOLT CIRCLE
11" (279mm) BOLT CIRCLE
12" (305mm) BOLT CIRCLE
11" (279mm) BOLT CIRCLE
12" (305mm) BOLT CIRCLE
Galvanized used with:
3 1/2"
(89mm)
AB kit# 122611
AB kit# 122608
AB kit# 122612
AB kit# 122613
AB kit# 1226140
5SQ
5RP
6SQ
RTP
RTP
STL.
STL
STL
STL
STL
GAL
GAL
GAL
GAL
GAL
S07G
11" (279mm) BOLT CIRCLE
S07G
11" (279mm) BOLT CIRCLE
S07G
12" (305mm) BOLT CIRCLE
S11G 20/25/30' 11" (279mm) BOLT CIRCLE
S11G 35/39'
12" (305mm) BOLT CIRCLE
Each anchor bolt furnished with:
(2) 1" (25mm)-8 zinc plated or galvanized hex nuts and
(2) U.S.S. 1" (25mm) flat washers - 1 1/16" (29mm) I.D. x 2 1/2" (64mm) O.D. x 11/64" (4mm) thick - zinc plated or galvanized
1-1/4" X 42" (32mm X 1067mm)
Galvanized (Partially)
42" (1067mm)
Anchor Bolt Conversion Table
6" (152mm) Min.
1 1/4"
(32mm)
6"
(152mm)
Galvanized only available. Used with:
AB kit# 122615 RTP STL. GAL 39' (11.9mm) S07G 12" (305mm) Bolt Circle
AB kit# 122616 RTP STL GAL 14" (356mm) Bolt Circle
Each anchor bolt furnished with:
(2) 1 1/4" (32mm)-7 galvanized hex nuts and
(2) U.S.S. 1 1/4" (32mm) flat washers (1 3/8" (35mm) I.D. x 3" (76mm)
O.D. x .165" (4mm) thick) galvanized
Consult factory for aluminum pole anchor bolts
© LSI Industries Inc.
3305
12
"A"
=
Bolt Square
3.19" (81mm)
4.50" (114mm)
5.00" (127mm)
5.66" (144mm)
6.50" (165mm)
6.75" (171mm)
7.75" (197mm)
8.12" (206mm)
8.50" (216mm)
8.84" (225mm)
9.19" (233mm)
9.90" (251mm)
10.25" (260mm)
12.00" (305mm)
"B"
Bolt Circle
4.50" (114mm)
6.36" (162mm)
7.00" (178mm)
8.00" (203mm)
9.19" (233mm)
9.50" (241mm)
11.00" (279mm)
11.50" (292mm)
12.00" (305mm)
12.50" (318mm)
13.00" (330mm)
14.00" (356mm)
14.50" (368mm)
17.00" (432mm)
A
Bolt Square
B
Bolt Circle
Steel Pole EPAs/Wall Mount Brackets
Pole Basics
Pole EPAs
Bolt Circles
B
Steel Square Poles
EPA
Height
70 MPH 80 MPH
14' (4.3m)
16' (4.9m)
16' (4.9m)
18' (5.5m)
18' (5.5m)
20' (6.1m)
20' (6.1m)
20' (6.1m)
20' (6.1m)
22' (6.7m)
22' (6.7m)
22' (6.7m)
22' (6.7m)
24' (7.3m)
24' (7.3m)
24' (7.3m)
24' (7.3m)
24' (7.3m)
26' (7.9m)
26' (7.9m)
26' (7.9m)
26' (7.9m)
26' (7.9m)
28' (8.5m)
28' (8.5m)
30' (9.1m)
30' (9.1m)
35' (10.7m)
39' (11.9m)
23.3
18.6
34.6
14.4
27.9
11.0
18.7
22.5
35.5
10.4
18.7
20.8
34.0
7.7
15.1
16.7
28.6
46.2
5.3
12.0
13.2
24.0
39.6
19.9
33.9
16.3
28.8
18.3
11.5
16.7
13.1
25.0
9.7
19.7
7.0
12.8
15.4
25.4
6.3
12.6
13.8
23.9
4.0
9.7
10.5
19.6
32.6
2.1
7.2
7.6
15.8
27.3
12.5
22.7
9.6
18.6
10.0
4.3
Outside
Material Bolt
Circle
90 MPH 100 MPH Dimensions
12.2
9.3
18.5
6.5
14.1
4.2
8.8
10.5
18.4
3.4
8.4
8.9
17.0
1.5
6.0
6.2
13.4
23.2
—
3.9
3.8
10.3
18.9
7.5
15.1
5.0
11.6
4.3
—
9.0
6.5
13.8
4.2
10.1
2.2
5.9
7.0
13.4
1.4
5.4
5.5
12.0
—
3.3
3.1
8.9
16.6
—
1.5
1.0
6.3
12.9
3.9
9.6
1.7
6.6
—
—
4" (102mm)
4" (102mm)
5" (127mm)
4" (102mm)
5" (127mm)
4" (102mm)
4" (102mm)
5" (127mm)
5" (127mm)
4" (102mm)
4" (102mm)
5" (127mm)
5" (127mm)
4" (102mm)
4" (102mm)
5" (127mm)
5" (127mm)
6" (153mm)
4" (102mm)
4" (102mm)
5" (127mm)
5" (127mm)
6" (152mm)
5" (127mm)
6" (152mm)
5" (127mm)
6" (152mm)
6" (152mm)
6" (152mm)
S11G
S11G
S11G
S11G
S11G
S11G
S07G
S11G
S07G
S11G
S07G
S11G
S07G
S11G
S07G
S11G
S07G
S07G
S11G
S07G
S11G
S07G
S07G
S07G
S07G
S07G
S07G
S07G
S07G
B
B
C
B
C
B
B
C
D
B
B
C
D
B
B
C
D
J
B
B
C
D
J
D
J
D
J
J
J
Steel Round Tapered Poles
EPA
Height
70 MPH 80 MPH 90 MPH
20' (6.1m)
25' (7.6m)
30' (9.1m)
35' (10.7m)
39' (11.9m)
39' (11.9m)
45'* (13.7m)
50'* (15.2m)
33.6
31.4
30.7
30.1
27.1
51.1
42.3
28.9
24.8
22.9
22.0
21.1
18.5
36.9
31.4
21.0
100 MPH
18.8
17.0
16.0
14.9
12.6
27.1
24.0
15.6
14.4
12.8
11.7
10.5
8.4
20.2
18.6
11.7
Material
Bolt
Circle
S11 Ga.
S11 Ga.
S11 Ga.
S11 Ga.
S11 Ga.
S07 Ga.
S07 Ga.
S07 Ga.
N
N
N
Q
Q
S
T
T
Steel Round Poles
Height
10' (3.0m)
12' (3.7m)
14' (4.3m)
16' (4.9m)
16' (4.9m)
16' (4.9m)
18' (5.5m)
18' (5.5m)
18' (5.5m)
20' (6.1m)
20' (6.1m)
20' (6.1m)
22' (6.7m)
22' (6.7m)
22' (6.7m)
24' (7.3m)
24' (7.3m)
24' (7.3m)
26' (7.9m)
26' (7.9m)
28' (8.5m)
30' (9.1m)
EPA
70 MPH 80 MPH 90 MPH 100 MPH
18.5
10.6
13.8
8.2
14.6
8.0
10.7
6.1
11.7
6.1
8.4
4.5
9.9
4.9
6.9
3.4
18.6
9.8
13.4
7.3
32.2
17.0
23.2
12.6
15.5
8.0
11.1
5.8
24.2
12.9
17.5
9.6
37.5
20.9
27.7
16.1
12.5
6.1
8.7
4.2
20.0
10.2
14.2
7.4
31.7
17.3
23.1
13.1
10.0
4.4
6.7
2.8
16.6
8.0
11.5
5.5
26.9
14.2
19.4
10.5
7.8
3.0
4.9
1.5
13.6
6.0
9.1
3.8
22.9
11.6
16.2
8.3
11.1
4.3
7.1
2.3
19.5
9.4
13.5
6.4
16.5
7.4
11.1
4.7
13.8
5.6
8.9
3.2
© LSI Industries Inc.
3305
Outside Material Bolt
Dimensions
Circle
4" (102mm)
4" (102mm)
4" (102mm)
4" (102mm)
5" (127mm)
5" (127mm)
4" (102mm)
5" (127mm)
5" (127mm)
4" (102mm)
5" (127mm)
5" (127mm)
4" (102mm)
5" (127mm)
5" (127mm)
4" (102mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
S10G
S10G
S10G
S10G
S11G
S07G
S10G
S11G
S07G
S10G
S11G
S07G
S10G
S11G
S07G
S10G
S11G
S07G
S11G
S07G
S07G
S07G
L
L
L
L
L
M
L
L
M
L
L
M
L
L
M
L
L
M
L
M
M
M
13
C
4" (102mm) square
10-1/8" (257mm) sq.
5" (127mm) square
10-1/8" (257mm) sq.
D
J
5" (127mm) square
10-1/8" (257mm) sq.
6" (152mm) square
12" (305mm) sq.
11" (279mm) Dia. Bolt Circle 11" (279mm) Dia. Bolt Circle 11" (279mm) Dia. Bolt Circle
12" (305mm) Dia. Bolt Circle
N
Q
10-1/8" (257mm) sq.
Bolt
Holes
S
12" (305mm) sq.
Bolt
Circle
T
12" (305mm) sq.
13-1/2" (343mm) sq.
Bolt
Holes
Bolt
Holes
Bolt
Holes
Bolt
Circle
Bolt
Circle
Bolt
Circle
0° Hand-hole
0° Hand-hole
0° Hand-hole
11" (279mm) Dia.
Bolt Circle
12" (305mm) Dia.
Bolt Circle
12" (305mm) Dia.
Bolt Circle
L
L
0° Hand-hole
14" (356mm) Dia.
Bolt Circle
M
4" (102mm) Round
5" (127mm) Round
5" (127mm) Round
10-1/8" (257mm) sq.
10-1/8" (257mm) sq.
10-1/8" (257mm) sq.
11" (279mm) Dia. Bolt Circle
11" (279mm) Dia. Bolt Circle
11" (279mm) Dia. Bolt Circle
* All LSI Lighting Systems’ poles are guaranteed to meet the EPA
requirements listed. LSI Lighting Systems is not responsible if a
pole order has a lower EPA rating than the indicated wind-loading
zone where the pole will be located. Caution: This guarantee does
not apply if the pole/bracket/fixture combination is used to support
any other items such as flags, pennants, or signs, which would
add stress to the pole. LSI Lighting Systems cannot accept
responsibility for harm or damage caused in these situations. Note:
Pole calculations include a 1.3 gust factor over steady wind velocity.
Example: poles designed to withstand 80 MPH steady wind will
withstand gusts to 104 MPH. EPAs are for locations 100 miles away
from hurricane ocean lines. Consult LSI for other areas. Note:
Hurricane ocean lines are the Atlantic and Gulf of Mexico coastal
areas. For applications in Florida or Canada, consult factory.
** 45' (13.7M) and 50' (15.2M)poles are two-piece; bottom is S07G and
top is S11G.
If luminaire total weight exceeds 250 lbs. (113.4kg), consult factory.
Wall Mount Brackets
8" x 8"
(203mm x 203mm)
BKS BO WM * CLR
Steel Wall Mount plate for flat
surfaced arm for use with 5”
(127mm) traditional drill pattern.
Part# 123111CLR
8" x 8"
(203mm x 203mm)
BKS XBO WM * CLR
2-bolt pattern Steel Wall Mount
plate for use with 3” (76mm)
traditional drill pattern.
Wall Mount Plate
Part# 382132CLR
Aluminum Pole EPAs
Pole Basics
Pole EPAs
Bolt Circles
G
Aluminum Square Poles
Structure
Max
Outside Material Weight Bolt
EPA
Weight
1
70 MPH 80 MPH 90 MPH 100 MPH Dimensions
(lbs)2
(lbs) Circle
350
24
4" (102mm)
8' (2.4m)
0.125
G
24.3
18.2
14.0
10.9
260
28
4" (102mm)
10' (3.0m)
0.125
G
18.9
13.9
10.5
8.0
260
33
4" (102mm)
12' (3.7m)
0.125
G
14.7
10.6
7.7
5.7
200
37
4" (102mm)
14' (4.3m)
0.125
G
11.9
8.3
5.8
4.1
200
39
4" (102mm)
15' (4.6m)
0.125
G
8.3
5.7
3.8
2.6
200
42
4" (102mm)
16' (4.9m)
0.125
G
7.3
4.8
3.1
1.9
200
59
4" (102mm) 0.188
16' (4.9m)
G
12.3
8.6
6.1
4.3
100
46
4" (102mm)
18' (5.5m)
0.125
G
5.9
3.6
2.1
N/A
150
66
4" (102mm) 0.188
18' (5.5m)
G
10.1
6.8
4.6
3.0
260
85
5" (127mm) 0.188
18' (5.5m)
H
18.0
12.7
9.0
6.4
150
51
4" (102mm)
20' (6.1m)
0.125
G
4.1
2.1
N/A
N/A
150
73
4" (102mm) 0.188
20' (6.1m)
G
8.1
5.2
3.1
1.7
150
93
5" (127mm) 0.188
20' (6.1m)
H
15.4
10.5
7.1
4.7
150
114
6" (152mm) 0.188
20' (6.1m)
I
24.8
17.4
12.3
8.7
260
148
6" (152mm) 0.250
20' (6.1m)
I
33.8
24.3
17.8
13.2
100
115
5" (127mm) 0.188
25' (7.6m)
H
9.5
5.6
3.0
1.0
260
139
6" (152mm) 0.188
25' (7.6m)
I
15.8
10.1
6.1
3.3
260
182
6" (152mm) 0.250
25' (7.6m) 23.3
I
15.8
10.7
7.0
260
216
6" (152mm) 0.250
30' (9.1m)
I
14.2
8.6
4.8
2.0
150
229
6" (152mm) 0.250
32' (9.8m) 12.2
I
6.9
3.2
N/A
100
250
35' (10.7m)
6" (152mm) 0.250
I
9.1
N/A
4.2
N/A
Height
Aluminum Round Tapered Poles
Height
18' (5.5m)
18' (5.5m)
18' (5.5m)
20' (6.1m)
20' (6.1m)
20' (6.1m)
25' (7.6m)
25' (7.6m)
30' (9.1m)
30' (9.1m)
30' (9.1m)
EPA
70 MPH 80 MPH90 MPH
6.5
4.4
3.1
15.4
11.3
8.6
18.9
14.0 10.7
5.1
3.3
2.1
12.7
9.1
6.8
15.8
11.4
8.6
19.4
14.2 10.8
24.2
17.8 13.7
18.8
13.6 10.3
23.7
17.4 13.3
24.2
17.7 13.6
100
MPH
2.2
6.8
8.5
1.3
5.3
6.8
8.5
10.8
8.0
10.4
10.7
Pole Top
O.D.1
3.0 (76mm)
4.0 (102mm)
4.0 (102mm)
3.0 (76mm)
4.0 (102mm)
4.0 (102mm)
4.5 (114mm)
4.5 (114mm)
4.5 (114mm)
4.5 (114mm)
4.5 (114mm)
Pole Bottom
O.D.1
5.0 (127mm)
6.0 (152mm)
6.0 (152mm)
5.0 (127mm)
6.0 (152mm)
6.0 (152mm)
8.0 (203mm)
8.0 (203mm)
9.0 (229mm)
9.0 (229mm)
8.0 (203mm)
Material Max Wt Bolt Struct.
(lbs)2 Circle Wt (lbs)3
0.125
0.156
0.188
0.125
0.156
0.188
0.156
0.188
0.156
0.188
0.250
100
100
100
100
100
100
150
150
150
150
150
F
X
X
F
X
X
Y
Y
Z
Z
Y
40
59
70
42
63
74
96
113
127
149
174
All poles are guaranteed to meet the EPA requirements listed. Pole
manufacturer is not responsible if a pole order has a lower EPA rating
than the indicated wind-loading zone where the pole will be located.
CAUTION: This guarantee does not apply if the pole/bracket/fixture
combination is used to support any other items such as flags,
pennants, or signs, which would add stress to the pole. Pole
manufacturer cannot accept responsibility for harm or damage
caused in these situations.
NOTE: Pole calculations include a 1.3 gust factor over steady wind
velocity. Example: poles designed to withstand 80 MPH steady wind
will withstand gusts to 104 MPH. EPAs are for locations 100 miles away
from hurricane ocean lines. Consult LSI for other areas. Note: Hurricane
ocean lines are the Atlantic and Gulf of Mexico coastal areas. For
applications in Canada and areas using code requirements other than
AASHTO LTS-3-94, consult factory.
© LSI Industries Inc.
3305
14
H
4" (102mm) Square
I
6" (152mm) Square
5" (127mm) Square
9-15/16" (252mm) Square Base Plate 11-9/16" (294mm) Square Base Plate
9" (229mm) Dia. Bolt Circle
+/- 1/2” (13mm)
11" (279mm) Dia. Bolt Circle
+/- 1/2” (13mm)
F
12-3/4" (324mm) Square Base Plate
12-1/2" (318mm) Dia. Bolt Circle
+/- 7/16” (11mm)
X
5" (127mm) O.D. Pole Bottom
9-5/8" (244mm) square base plate
6" (152mm) O.D. Pole Bottom
10-5/16" (262mm) square base plate
Bolt
Holes
Bolt
Holes
Bolt
Circle
Bolt
Circle
8-5/8" (219mm) Dia. Bolt Circle
+/- 7/8" (22mm)
9-1/2" (241mm) Dia. Bolt Circle
+/- 3/4" (19mm)
0° Hand-hole
0° Hand-hole
Y
Z
8" (203mm) O.D. Pole Bottom
12-1/16"(306mm) square base plate
9" (229mm) O.D. Pole Bottom
12-1/2" (317mm) square base plate
Bolt
Holes
Bolt
Holes
Bolt
Circle
Bolt
Circle
0° Hand-hole
11-5/8" (295mm) Dia. Bolt Circle
+/- 3/8" (9mm)
0° Hand-hole
13-1/4" (337mm) Dia. Bolt Circle
+/- 3/4" (19mm)
Aluminum Pole EPAs
Pole Basics
Pole EPAs
Bolt Circles
Aluminum Round Poles
EPA
Height
8' (2.4m)
10' (3.0m)
10' (3.0m)
12' (3.7m)
12' (3.7m)
12' (3.7m)
12' (3.7m)
14' (4.3m)
14' (4.3m)
14' (4.3m)
14' (4.3m)
16' (4.9m)
16' (4.9m)
16' (4.9m)
16' (4.9m)
18' (5.5m)
18' (5.5m)
18' (5.5m)
20' (6.1m)
20' (6.1m)
20' (6.1m)
10.7
8.1
15.4
6.2
12.2
15.5
18.8
4.6
9.7
12.5
15.3
3.2
7.4
9.8
12.2
5.6
7.7
9.7
4.1
5.9
7.6
7.9
5.9
11.5
4.3
9.0
11.5
14.0
3.0
6.9
9.1
11.2
1.9
5.1
6.9
8.7
3.7
5.2
6.8
2.4
3.8
5.2
E
Outside
Material Max Weight Bolt
Structure
(lbs)1
Circle Weight (lbs)2
100 MPH Dimensions
70 MPH 80 MPH 90 MPH
6.0
4.3
8.9
3.0
6.9
8.9
10.9
1.9
5.3
7.0
8.7
1.0
3.8
5.3
6.7
2.7
3.9
5.1
1.7
2.8
3.8
4.7
3.3
7.1
2.2
5.5
7.1
8.7
1.2
4.1
5.5
6.9
0.5
3.0
4.1
5.3
2.0
3.0
4.0
1.2
2.0
2.9
4" (102mm)
4" (102mm)
5" (127mm)
4" (102mm)
5" (127mm)
5" (127mm)
5" (127mm)
4" (102mm)
5" (127mm)
5" (127mm)
5" (127mm)
4" (102mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
0.125
0.125
0.125
0.125
0.125
0.156
0.188
0.125
0.125
0.156
0.188
0.125
0.125
0.156
0.188
0.125
0.156
0.188
0.125
0.156
0.188
75
75
100
75
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
E
E
F
E
F
F
F
E
F
F
F
E
F
F
F
F
F
F
F
F
F
19
22
27
26
32
38
45
30
36
44
52
33
41
50
58
45
55
65
50
61
72
F
4" (102mm) Round
5" (127mm) Round
8-15/16" (226mm) Square Base Plate
9-5/8" (244mm) Square Base Plate
Bolt
Holes
Bolt
Holes
Bolt
Circle
Bolt
Circle
0° Hand-hole
0° Hand-hole
7-1/2" (191mm) Dia. Bolt Circle
+/- 3/4" (19mm)
8-5/8" (219mm) Dia. Bolt Circle
+/- 7/8" (22mm)
W
4" (102mm) & 5" (127mm) Round Hinged
12-5/8"(321mm) diameter base plate
(optional)
Aluminum Round Hinged Base Poles
EPA
Height
Outside
Material Max Weight Bolt
Structure
(lbs)1
Circle Weight (lbs)2
100 MPH Dimensions
70 MPH 80 MPH 90 MPH
8' (2.4m)
10' (3.0m)
10' (3.0m)
12' (3.7m)
12' (3.7m)
12' (3.7m)
12' (3.7m)
14' (4.3m)
14' (4.3m)
14' (4.3m)
14' (4.3m)
16' (4.9m)
16' (4.9m)
16' (4.9m)
16' (4.9m)
18' (5.5m)
18' (5.5m)
18' (5.5m)
20' (6.1m)
20' (6.1m)
20' (6.1m)
10.8
8.2
15.5
6.3
12.4
15.7
18.9
4.7
9.8
12.6
15.4
3.4
7.6
10.0
12.3
5.7
7.7
9.8
4.2
6.0
7.7
8.0
5.9
11.6
4.4
9.1
11.6
14.1
3.1
7.0
9.2
11.3
2.0
5.2
7.1
8.9
3.7
5.3
6.8
2.5
3.9
5.2
6.1
4.4
9.0
3.1
7.0
9.0
11.0
2.0
5.4
7.1
8.7
1.1
3.9
5.4
6.8
2.7
4.0
5.2
1.7
2.8
3.9
4.8
3.3
7.2
2.2
5.6
7.2
8.8
1.3
4.2
5.6
6.9
0.5
3.0
4.2
5.3
2.0
3.0
4.0
1.2
2.1
2.9
4" (102mm)
4" (102mm)
5" (127mm)
4" (102mm)
5" (127mm)
5" (127mm)
5" (127mm)
4" (102mm)
5" (127mm)
5" (127mm)
5" (127mm)
4" (102mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
5" (127mm)
0.125
0.125
0.125
0.125
0.125
0.156
0.188
0.125
0.125
0.156
0.188
0.125
0.125
0.156
0.188
0.125
0.156
0.188
0.125
0.156
0.188
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
75
75
75
75
75
75
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
19
22
27
26
32
38
45
30
36
44
52
33
41
50
58
45
55
65
50
61
72
Flat Fluted Round Poles
Height
8' (2.4m)
8' (2.4m)
10' (3.0m)
10' (3.0m)
12' (3.7m)
12' (3.7m)
12' (3.7m)
14' (4.3m)
14' (4.3m)
16' (4.9m)
16' (4.9m)
16' (4.9m)
18' (5.5m)
18' (5.5m)
18' (5.5m)
Outside Material Max Weight Bolt
EPA
(lbs)1
Circle
80 MPH 90 MPH 100 MPH Dimensions
13.3
21.9
9.1
15.5
6.3
11.2
17.2
8.1
13.1
5.7
9.7
10.3
3.7
7.0
12.9
10.2
17.0
6.8
11.8
4.5
8.3
13.1
5.7
9.5
3.7
6.7
7.3
1.9
4.4
9.1
8.0
13.4
5.2
9.1
3.2
6.2
10.0
4.0
6.9
2.2
4.5
5.2
N/A
2.5
6.3
9-1/4" (235mm) Dia. Bolt Circle
+/- 3/4"(19mm)
4" (102mm) 0.125
5" (127mm) 0.125
4" (102mm) 0.125
5" (127mm) 0.125
4" (102mm) 0.125
5" (127mm) 0.125
6" (152mm) 0.125
5" (127mm) 0.125
6" (152mm) 0.125
5" (127mm) 0.125
6" (152mm) 0.125
5" (127mm) 0.188
5" (127mm) 0.125
6" (152mm) 0.125
6" (152mm) 0.188
© LSI Industries Inc.
3305
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
O/P
O/P
O/P
O/P
O/P
O/P
O/P
O/P
O/P
O/P
O/P
O/P
O/P
O/P
O/P
FRN2
Wt (lbs)2
67
69
70
73
74
78
82
82
87
87
93
103
91
98
120
15
FRN3
Wt (lbs)2
74
76
78
81
81
85
87
90
93
94
98
109
99
104
125
O
P
4", 5", & 6” FRN2
17"(432mm) diameter base plate
180o
4", 5", & 6” FRN3
17"(432mm) diameter base plate
90o
270o
0o - Access Door
11-1/2" (292mm) Dia. Bolt Circle
+/- 1-1/2" (38mm)
0o - Access Door
11-1/2" (292mm) Dia. Bolt Circle
+/- 1-1/2" (38mm)
All poles are guaranteed to meet the EPA requirements listed. Pole
manufacturer is not responsible if a pole order has a lower EPA rating
than the indicated wind-loading zone where the pole will be located.
CAUTION: This guarantee does not apply if the pole/bracket/fixture
combination is used to support any other items such as flags,
pennants, or signs, which would add stress to the pole. Pole
manufacturer cannot accept responsibility for harm or damage
caused in these situations.
NOTE: Pole calculations include a 1.3 gust factor over steady wind
velocity. Example: poles designed to withstand 80 MPH steady wind
will withstand gusts to 104 MPH. EPAs are for locations 100 miles away
from hurricane ocean lines. Consult LSI for other areas. Note: Hurricane
ocean lines are the Atlantic and Gulf of Mexico coastal areas. For
applications in Canada and areas using code requirements other than
AASHTO LTS-3-94, consult factory.
Wind Speed Map
Pole Basics
© LSI Industries Inc.
3305
16
LSI Poles can be drilled for nearly any fixture
(not only LSI fixtures). Of course, when you
order your entire lighting system from LSI, you
guarantee a precise color match between
fixture, pole and brackets.
Contact Us Today to learn about how we can
help you!
10000 Alliance Road
©LSI INDUSTRIES INC.
Cincinnati, Ohio 45242
(513) 793-3200
FAX (513) 793-0147
www.lsi-industries.com
7/16 3305