Data Sheet
FLB Series • Frame Light Barriers
FLB-CON3-5
FLB Series
FLB-CON3-5
Amplifier
- Suitable for FLB-F-...-C, FLB-H-...-C, FLB-V-...-C sensors
- Sensitivity and gain factor adjustable by means of
potentiometer (inside housing)
- Switching state indication by means of a yellow/green LED
- Dynamic and static output
- Threshold correction can be activated
- High switching frequency (typ. 10 kHz)
- Dirt accumulation indication by means of a red LED
- Bright- and dark-switching
- Push-pull output (npn and pnp suitable)
Design
(FLB-V-...-C)
Product name:
FLB-CON3-5
Suitable for connection to
frame light barriers of type
(cf. page 4):
FLB-F-...-C (1m)
FLB-H-...-C (1m)
FLB-V-...-C (1m)
(FLB-F-...-C)
Pull relief for
sensor cable
Mounting holes
LED red "DIRT ACCUMULATION"
LED off: No dirtying
LED red: Sensor dirty
(FLB-H-...-C)
LED red/green "DYNAMIC"
LED red: Object is being moved through sensor
LED green: No object is being moved through sensor
5-pin circular connector
type Binder 680 (270°)
Connecting cable:
cab-agl5
LED yellow/green "STATIC"
LED yellow: Sensor covered
LED green: Sensor free
Aluminum housing,
anodized in blue
Sensor Instruments GmbH • D-94169 Thurmansbang • Schlinding 11
Tel. +49 (0)8544 9719-0 • Fax +49 (0)8544 9719-13
info@sensorinstruments.de • www.sensorinstruments.de
(2013-11-21) FLB-CON3-5 / Page 1 of 4
Subject to alteration
Data Sheet
FLB Series • Frame Light Barriers
FLB-CON3-5
Technical Data
Mo d e l
F L B - C ON 3 - 5
Vo lta g e s up p ly
S ui ta b le s e ns o r fro nte nd s
+1 2 V D C ... +3 2 V D C Ri p p le 1 0 % ma x.
F L B -F -...-C , F L B -H-...-C , F L B -V-...-C (c a b le ve rs i o ns , d i re c tly a s s e mb le d to F L B -C ON3 -5 )
C urre nt c o ns ump ti o n
wi th s e ns o r: typ . 8 0 mA
Op e ra ti ng te mp e ra ture ra ng e
- 2 0 ° C ... + 6 0 ° C
Sto ra g e te mp e ra ture ra ng e
- 2 0 ° C ... + 8 5 ° C
Ho us i ng ma te ri a l
A lumi num, a no d i ze d i n b lue
Ho us i ng d i me ns i o ns
L xWxH a p p ro x. 6 0 mm x 2 7 mm x 2 7 mm
E nc lo s ure ra ti ng
IP 6 4
Thre s ho ld c o rre c ti o n
a d jus ta b le b y me a ns o f a n i nte g ra te d jump e r
Outp ut
D IGITA L S TATIC
1 x s ta ti c :
Q: NP N d a rk -s wi tc hi ng (NP N n.o .) / P NP b ri g ht-s wi tc hi ng (P NP n.c .)
Outp ut
D IGITA L D YNA MIC
1 x d yna mi c (p uls e le ng th 1 5 ms )
Q: NP N d a rk -s wi tc hi ng (NP N n.o .) / P NP b ri g ht-s wi tc hi ng (P NP n.c .)
P o te nti o me te r fo r
g a i n fa c to r
1 0 -re vo luti o ns p o te nti o me te r i nte g ra te d i n the ho us i ng
P o te nti o me te r fo r tri g g e r
thre s ho ld
1 0 -re vo luti o ns p o te nti o me te r i nte g ra te d i n the ho us i ng
D i rt a c c umula ti o n i nd i c a ti o n
re d L E D
S wi tc hi ng s ta te i nd i c a ti o n
S TATIC
ye llo w/g re e n L E D (ye llo w = s e ns o r c o ve re d , g re e n = s e ns o r fre e )
S wi tc hi ng s ta te i nd i c a ti o n
D YNA MIC
r e d /g r e e n L E D
(re d = o b je c t i s b e i ng mo ve d thro ug h s e ns o r, g re e n = no o b je c t i s b e i ng mo ve d thro ug h s e ns o r)
Typ e o f c o nne c to r
C o nne c ti ng c a b le to P L C
S wi tc hi ng fre q ue nc y
Ma x. s wi tc hi ng c urre nt
E M C te s t a c c . to
Sensor Instruments GmbH • D-94169 Thurmansbang • Schlinding 11
Tel. +49 (0)8544 9719-0 • Fax +49 (0)8544 9719-13
C o nne c ti o n to P L C : 5 -p o le fe ma le c o nne c to r B i nd e r S e ri e s 6 8 0 (2 7 0 °)
C o nne c ti o n to s e ns o r: vi a i nte g ra te d c a b le
c a b -a g l5 (l = 2 m)
typ . 1 0 k Hz
2 0 0 mA , s ho rt-c i rc ui t p ro o f
D IN E N 6 0 9 4 7 -5 -2
info@sensorinstruments.de • www.sensorinstruments.de
(2013-11-21) FLB-CON3-5 / Page 2 of 4
Subject to alteration
Data Sheet
FLB Series • Frame Light Barriers
FLB-CON3-5
Dimensions
(All dimensions in mm)
Connector Assignment
5-pin connector type Binder Series 680
Bridge
Pin No.:
1
2
3
4
5
Color:
blue
brown
white
black
red
Assignment:
0V
+Ub (+12 ... +32VDC)
Output Q
Output DYNAMIC
Connection control
(15 ms)
Connecting cable: cab-agl5 (l=2m)
5
1
FLB-CON3-5
Setting
Procedure for the adjustment of
potentiometers and jumper:
Jumper for selection of threshold:
static or dynamic
a)
b)
Jumper on the right: static (= standard adjustment)
Jumper in the left: dynamic (corrected threshold)
c)
d)
Unscrew the 4 slotted head screws
Unscrew the 2 plastic screws
(tensile relief of the two cablesl)
Carefully pull the electronic unit
out of the aluminum housing
Carry out setting of potentiometers
and of jumper
Threshold correction:
The adjusted threshold automatically adapts to
the current maximum value, this is to prevent for instance in case of dirt accumulation - a shift
of the trigger point. Furthermore this allows reliable
detection of smallest objects.
Sensor Instruments GmbH • D-94169 Thurmansbang • Schlinding 11
Tel. +49 (0)8544 9719-0 • Fax +49 (0)8544 9719-13
Potentiometer for adjustment
of gain factor
Increase of analog signal:
Rotation anticlockwise
(10-step-potentiometer)
Potentiometer for adjustment
of threshold
Increase of sensitivity:
Rotation anticlockwise
(10-step-potentiometer)
info@sensorinstruments.de • www.sensorinstruments.de
(2013-11-21) FLB-CON3-5 / Page 3 of 4
Subject to alteration
FLB Series • Frame Light Barriers
Data Sheet
FLB-CON3-5
Suitable Frontends
Sensor frontend suitable for connection to FLB-CON3-5:
(please select sensor frontend and order it together with the FLB-CON3-5,
as for delivery will both have to be assembled )
FLB-F-...-C (1m):
Dim. A =
Length of active
measuring range
(fork shape)
FLB-F-05/20
FLB-F-10/20
FLB-F-15/20
FLB-F-20/20
FLB-F-20/40
FLB-F-20/50
FLB-F-25/20
FLB-F-30/10
FLB-F-30/20
FLB-F-40/20
FLB-F-40/25
FLB-F-40/40
(A = 5 mm, B = 20 mm)
(A = 10 mm, B = 20 mm)
(A = 15 mm, B = 20 mm)
(A = 20 mm, B = 20 mm)
(A = 20 mm, B = 40 mm)
(A = 20 mm, B = 50 mm)
(A = 25 mm, B = 20 mm)
(A = 30 mm, B = 10 mm)
(A = 30 mm, B = 20 mm)
(A = 40 mm, B = 20 mm)
(A = 40 mm, B = 25 mm)
(A = 40 mm, B = 40 mm)
Dim. B =
Fork width = distane
transmitter/receiver
(horizontal light curtain)
Dim. A =
Length of active
measuring range:
FLB-H-05
FLB-H-10
FLB-H-15
FLB-H-20
FLB-H-25
FLB-H-30
FLB-H-40
5 mm
10 mm
15 mm
20 mm
25 mm
30 mm
40 mm
50 mm
FLB-H-...-C (1m):
(A = 5 mm)
(A = 10 mm)
(A = 15 mm)
(A = 20 mm)
(A = 25 mm)
(A = 30 mm)
(A = 40 mm)
FLB-V-...-C (1m):
(vertical light curtain)
FLB-V-05
FLB-V-10
FLB-V-15
FLB-V-20
FLB-V-25
FLB-V-30
FLB-V-40
(A = 5 mm)
(A = 10 mm)
(A = 15 mm)
(A = 20 mm)
(A = 25 mm)
(A = 30 mm)
(A = 40 mm)
Dim. A =
Length of active
measuring range
5 mm
10 mm
15 mm
20 mm
25 mm
30 mm
40 mm
50 mm
60 mm
All dimensions in mm
Sensor Instruments GmbH • D-94169 Thurmansbang • Schlinding 11
Tel. +49 (0)8544 9719-0 • Fax +49 (0)8544 9719-13
info@sensorinstruments.de • www.sensorinstruments.de
(2013-11-21) FLB-CON3-5 / Page 4 of 4
Subject to alteration