9437-78 Face-Mount Strap Dual Wheel Installation Instructions I-SD00258 78-3/4” (2000 mm) 5/16” 3/8” 19-11/16” (500 mm) 19-11/16” (500 mm) 19-11/16” (500 mm) 8 10 #2 3/8” + H + 1-5/16“ (10 mm + H + 33 mm) 2” - 4” (50-100 mm) (x4) (x1) (x2) (x1) (x2) (x2) (x1) (x1) 3 mm (x1) S T 4.2x32 (x 2) S T 4.8x32 (x 2) S T 4.8x50 (x 4) 4 mm (x1) 3/8” (10 mm) 8 (x 2) 8 (x 2) 10 (x 4) M6x10 (x8) To obtain the maximum weight capacity, all fasteners must be mounted securely into solid wood of studs or blocking within the wall or wood mounted to the face of the wall. 1 2 (X4) 3/8” Position stops on the rail before mounting the rail on the wall 1-1/8” (30 mm) 3/8” 10 2”- 4” m) 0m (50-10 ” 1/16 19-1 mm) (500 H + 1-11/16” (43 mm) ” 1/16 19-1 mm) (500 ” 1/16 19-1 mm) (500 Please insure track is level to prevent door from rolling open or close It may be necessary to adjust plate position (4 mm) (x4) (x2) l L eve FINISHED FLOOR Date: 10/15/15 Always visit www.hagerco.com for the latest Installation Instructions HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995 (4 mm ) Page 1 of 2 9437-78 Face-Mount Strap Dual Wheel Installation Instructions I-SD00258 3 glass door door application (x2) (3m m) 2 Remove wood door application (x2) 1 4 5 Drill holes (2 each) 5/16” diameter 1-1/8” deep when used with a glass door when used with a wood door 5/16” 1- 1 (2 /8 8m ” m ) Wall Wall (x2) 1-1/8” (30 mm) 32” 1-11/ ) m (34m 1-1/8” (30 mm) 5/16” 8 17 (4 /8 ” 0 m m ) 8 6” 15/1 ) m (24m 5-15/16” (150 mm) 6 7/8” (22 mm) 5-15/16” (150 mm) 5-15/16” (150 mm) 5-5/16” (150 mm) 5/8” (16 mm) 1-9/16” (40 mm) 1-9/16” (40 mm) Reinstall 1-11/32” (50 mm) GLASS (x2) Thickness: 5/16”- 1/2” (8-12 mm) 2” (50 mm) WOOD Thickness: 1-1/4”- 1-3/8” (31-35 mm) 1/4 ” (6 ½” Date: 10/15/15 Always visit www.hagerco.com for the latest Installation Instructions HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995 not for use on 1-3/4” (44.45 mm) doors (12 .5 m mm ) m) Page 2 of 2