Advancing
Together
ADR 5
®
Automatic Defect Removal Systems
Save BIG on
Maintenance
Gain Excellent
Quality Control
Improve Yield with
“SmartCutting”
ADR®5 is the latest advance
Trade off-line time for more uptime spent
G6 vision technology means you take only your
Precision, single-knife accuracy lets you save (and sell)
in Key’s nearly 30-year history
producing superior product:
best product to market:
more good product:
• Optimal performance while reducing
• Remove smaller defects - G6 trichromatic
• Eliminate waste - throw a single knife to remove
of automatic defect removal
technology for the potato
industry. Today, most frozen
French fries in the world,
from shoestring to steak cut,
pass through an ADR system
on their way to fast food
outlets, supermarkets and
shopping carts.
The ADR®5 enables more
throughput; increased cutting
precision; lower maintenance
costs and more uptime.
the maintenance cost with
Vis/IR cameras provide high-resolution,
end defects and to selectively cut good fries in half
the CleanBelt CIP system
1024-pixel vision
without waste*
• Air-actuated knives; valve lifetime is
multiplied
• Decrease cutterwheel overhaul
frequency
• No Racking with pinned carousel
• Long-life, solid state LED lighting;
No bulbs to change, calibration is
practically eliminated
• Protected electronics; fully sealed
camera/lamp housing prevents accidental misalignment or damage
• Simplified touchscreen user interface;
easy to train operators
• Continued easy/economical upgrades
with modular vision platform
• Assure quality faster - identify peel, good
flesh & defects simultaneously at 4,000
scans/sec... performance unmatched in the
industry today
• Get the green out with Vis/IR technology
• Reduce white cut rate - up to 50% decrease in white
cubes
• Reduce downstream breakage of overlong fries
• Eliminate wounded steak cuts - ADR®5 uses
2 side-by-side blades where needed
that can also work efficiently on peel-on
product
• Remove sugar end defects with the optional CIT (Chemical Imaging Technology)
module
Increase Capacity
See greater throughput compared to other
systems:
• Step up product flow - process up to
17,000 lbs (7.7 metric tons) every hour
• Control quality without overloading ADR®s,
even during late storage processing
product.info@key.net | www.key.net
Productivity, Profitability
and Progress
G6 Tri-Chromatic
Cameras
Solid-state LED Lamps
The ADR 5 demonstrates its value through
Industry-leading cameras
green/infrared illumina-
increased capacity and efficiency, consistent
feature Vis/IR optics for
tion enables peel-on or
results, improved good product yield and re-
pinpoint defect detec-
peeled product cutting
duced maintenance costs. Further, its modular
tion in peel-on or peeled
G6 electro-optical foundation makes your
product
®
ADR®5 ready to plug into future advance-
G6 Image Processor
ments without replacing the entire system.
Now that’s progress.
New Cutter Wheel
Single-blade capability
for long fry and smart
Pentium®-based module
cutting; lower white cut
converts information to
rate, faster belt speeds,
knife action
no racking
Air-Actuated Valves
ADR®5 at a Glance
Long valve life; lower
FeatureADR®5
Capacity (mT/hr)
Solid-state (no bulbs) red/
parts and labor expense;
7.7
more uptime
Cutter Head with Single Knife Throw
•
CIT Module
SmartCutting/Length Grading*
•
The only defect removal
Reduced White Cuts
•
system that identifies and
Air-Valve-Actuated Knives
•
removes sugar ends from
G6 Engine/Vision Platform
•
strips
Vis/IR Cameras
•
backups and file storage;
CIT Module (optional)
•
can run multiple systems
LED Lighting
•
Single Power/Control Unit
•
Bed Shift
•
Single-Unit Power/
Control
Modular and reliable,
with USB flash drive for
Brush-Off•
Recycle Available
•
*at rated capacity
product.info@key.net | www.key.net
REV 160208