• Handling gloves are worn to protect the operator’s hands . In an ESD protected
area the gloves should be conductive or static dissipative. • Knitted fabric with 5mm stripe • Surface resistance between 10E5 - 10E9 tested per IEC 61340-2-3
• Decay time within 0.3 seconds tested per Test method B.2 per EN 61340-5-1-1998 • Composition: 93% polyester filament yarn with 7% carbon compound filament yarn • The gloves are washable. Use mild soap solution only. Do not use bleach or other
strong cleaners as it destroys conductivity. Check conductivity after each wash.
• Wearing gloves does not negate the need for wrist straps or other effective
personnel grounding methods.
Item
Description
72610 ESD Handling Glove, with Coated Finger Tips, Small
72611 ESD Handling Glove, with Coated Finger Tips, Medium
72612 ESD Handling Glove, with Coated Finger Tips, Large
72613 ESD Handling Glove, with Coated Finger Tips, XLarge
EN 61340-5-1 paragraph 5.2.6 Gloves and finger cots: “Gloves
and finger cots made from electrostatic conductive or electrostatic
dissipative material are essential if hand tools are used. Gloves and
finger cots made from low charging material are permitted only in
circumstances when hand tools are not used. Where gloves and
finger cots are removed in the EPA, they should not be placed in
close proximity to ESDS.”
Unless otherwise specified tolerance ± 10%
Glove Laundering
For proper operation, the ESD Gloves must be laundered periodically. Woolite works well. Liquid detergents are
better than dry in that there is less caking and frictional wear. Launder glove in cool or warm water, tumble dry
with low heat or hang dry. Machine washing works well if using a standard house machine on gentle cycle. It is
not recommended to launder these gloves in heavy industrial laundry machines as it will lead to premature wear.
Gloves should be tumbled dry using low heat. DO NOT BLEACH.
Made in Britain
Specifications and procedures subject to change without notice.
ESD Handling Glove, with Coated Finger
CHARLESWATER Ltd.
Unit 17. Millbrook Business Park, Sybron Way
Crowborough, East Sussex TN6 3JZ United Kingdom
Phone: 00 44 (0) 1892-665313, Fax: 00 44 (0) 1892-668838
internet: Charleswater.co.uk
© 2010 CHARLESWATER LTD.
Drawing Number
72610.E
DATE:
August
2010
Description
The Menda Dissipative Nylon Gloves with a Foamed Polyurethane
Coating are designed as a low sloughing glove for photo handling,
and can be used in many other industrial applications. They
protect the operator’s hands and film or product being handled. These
gloves have the palm and fingers coated with polyurethane to minimize
fingerprints and scratches on film or other products. Form fitting gloves
combine excellent tactile feel with slip resistant coating and are also ideal
for handling circuit boards.
The Menda Dissipative Nylon Gloves with Polyurethane Coating have
ESD control properties of low charging and dissipative, addressing
ElectroStatic Attraction problems from particles, and have good ventilation
minimizing sweat and clamminess.
They are sold in pairs.
Features
• Nylon knitted glove is form fitting, comes in 5 sizes
• Non-slip polyurethane coated palm and fingers
• Low dust and lint sloughing - choice for photo handling and other applications
• Good elasticity and ventilation, minimizing sweat build-up
• Thickness: 1mm ± 0.2mm
Palm Side
Back Hand Side
• Fabric: Carbon Yarn 20% + Nylon Yarn 80%
• Resistance 1 x 10E5 < 1 x 10E9 ohms, tested per ANSI/ESD SP15.1
Standard Practice for In-Use Resistance Testing of Gloves and Finger Cots
Glove Laundering
For proper operation, the ESD Gloves must be laundered periodically.
Woolite works well. Liquid detergents are better than dry in that there
is less caking and frictional wear. Launder glove in cool or warm
water, tumble dry with low heat or hang dry. Machine washing works
well if using a standard house machine on gentle cycle. It is not
recommended to launder these gloves in heavy industrial laundry
machines as it will lead to premature wear. Gloves should be tumbled
dry using low heat. DO NOT BLEACH. After laundering, verify
Rtt 1 x 10E5 < 1 x 10E9 ohms.
*Not recommended for use above 104ºF (40ºC)
Item
Size
TEST REPORT - EN 388
35669
X-Small
The samples submitted were tested in accordance with EN 388 :
35670
Small
Test Method
35671
Medium
35672
Large
35673
X-Large
Performance Level
6.1 Abrasion Resistance
4
6.2 Blade Cut Resistance
1
6.3 Tear Resistance
3
6.4 Puncture Resistance
1
Specifications and procedures subject to change without notice
Dissipative Nylon Gloves with Polyurethane Coating
3651 WALNUT AVE., CHINO, CA 91710
PHONE: (909) 627-2453 • FAX: (951) 755-8848
WEBSITE: MendaPump.com
© 2012 DESCO INDUSTRIES INC.
Employee Owned
DRAWING NUMBER
35670
DATE:
August
2012